Merge remote branch 'origin/master' of /home/airlied/kernel//linux-2.6 into drm-core-next

Documentation/DocBook/device-drivers.tmpl

@@ -46,7 +46,6 @@
 
      <sect1><title>Atomic and pointer manipulation</title>
 !Iarch/x86/include/asm/atomic.h
-!Iarch/x86/include/asm/unaligned.h
      </sect1>
 
      <sect1><title>Delaying, scheduling, and timer routines</title>

Documentation/DocBook/kernel-api.tmpl

@@ -57,7 +57,6 @@
      </para>
 
      <sect1><title>String Conversions</title>
-!Ilib/vsprintf.c
 !Elib/vsprintf.c
      </sect1>
      <sect1><title>String Manipulation</title>

Documentation/DocBook/kernel-locking.tmpl

@@ -1961,6 +1961,12 @@ machines due to caching.
    </sect1>
   </chapter>
 
+  <chapter id="apiref">
+   <title>Mutex API reference</title>
+!Iinclude/linux/mutex.h
+!Ekernel/mutex.c
+  </chapter>
+
   <chapter id="references">
    <title>Further reading</title>
 

Documentation/DocBook/tracepoint.tmpl

@@ -104,4 +104,9 @@
    <title>Block IO</title>
 !Iinclude/trace/events/block.h
   </chapter>
+
+  <chapter id="workqueue">
+   <title>Workqueue</title>
+!Iinclude/trace/events/workqueue.h
+  </chapter>
 </book>

Documentation/block/cfq-iosched.txt

@@ -0,0 +1,45 @@
+CFQ ioscheduler tunables
+========================
+
+slice_idle
+----------
+This specifies how long CFQ should idle for next request on certain cfq queues
+(for sequential workloads) and service trees (for random workloads) before
+queue is expired and CFQ selects next queue to dispatch from.
+
+By default slice_idle is a non-zero value. That means by default we idle on
+queues/service trees. This can be very helpful on highly seeky media like
+single spindle SATA/SAS disks where we can cut down on overall number of
+seeks and see improved throughput.
+
+Setting slice_idle to 0 will remove all the idling on queues/service tree
+level and one should see an overall improved throughput on faster storage
+devices like multiple SATA/SAS disks in hardware RAID configuration. The down
+side is that isolation provided from WRITES also goes down and notion of
+IO priority becomes weaker.
+
+So depending on storage and workload, it might be useful to set slice_idle=0.
+In general I think for SATA/SAS disks and software RAID of SATA/SAS disks
+keeping slice_idle enabled should be useful. For any configurations where
+there are multiple spindles behind single LUN (Host based hardware RAID
+controller or for storage arrays), setting slice_idle=0 might end up in better
+throughput and acceptable latencies.
+
+CFQ IOPS Mode for group scheduling
+===================================
+Basic CFQ design is to provide priority based time slices. Higher priority
+process gets bigger time slice and lower priority process gets smaller time
+slice. Measuring time becomes harder if storage is fast and supports NCQ and
+it would be better to dispatch multiple requests from multiple cfq queues in
+request queue at a time. In such scenario, it is not possible to measure time
+consumed by single queue accurately.
+
+What is possible though is to measure number of requests dispatched from a
+single queue and also allow dispatch from multiple cfq queue at the same time.
+This effectively becomes the fairness in terms of IOPS (IO operations per
+second).
+
+If one sets slice_idle=0 and if storage supports NCQ, CFQ internally switches
+to IOPS mode and starts providing fairness in terms of number of requests
+dispatched. Note that this mode switching takes effect only for group
+scheduling. For non-cgroup users nothing should change.

Documentation/cgroups/blkio-controller.txt

@@ -217,6 +217,7 @@ Details of cgroup files
 CFQ sysfs tunable
 =================
 /sys/block/<disk>/queue/iosched/group_isolation
+-----------------------------------------------
 
 If group_isolation=1, it provides stronger isolation between groups at the
 expense of throughput. By default group_isolation is 0. In general that
@@ -243,6 +244,33 @@ By default one should run with group_isolation=0. If that is not sufficient
 and one wants stronger isolation between groups, then set group_isolation=1
 but this will come at cost of reduced throughput.
 
+/sys/block/<disk>/queue/iosched/slice_idle
+------------------------------------------
+On a faster hardware CFQ can be slow, especially with sequential workload.
+This happens because CFQ idles on a single queue and single queue might not
+drive deeper request queue depths to keep the storage busy. In such scenarios
+one can try setting slice_idle=0 and that would switch CFQ to IOPS
+(IO operations per second) mode on NCQ supporting hardware.
+
+That means CFQ will not idle between cfq queues of a cfq group and hence be
+able to driver higher queue depth and achieve better throughput. That also
+means that cfq provides fairness among groups in terms of IOPS and not in
+terms of disk time.
+
+/sys/block/<disk>/queue/iosched/group_idle
+------------------------------------------
+If one disables idling on individual cfq queues and cfq service trees by
+setting slice_idle=0, group_idle kicks in. That means CFQ will still idle
+on the group in an attempt to provide fairness among groups.
+
+By default group_idle is same as slice_idle and does not do anything if
+slice_idle is enabled.
+
+One can experience an overall throughput drop if you have created multiple
+groups and put applications in that group which are not driving enough
+IO to keep disk busy. In that case set group_idle=0, and CFQ will not idle
+on individual groups and throughput should improve.
+
 What works
 ==========
 - Currently only sync IO queues are support. All the buffered writes are

Documentation/gpio.txt

@@ -109,17 +109,19 @@ use numbers 2000-2063 to identify GPIOs in a bank of I2C GPIO expanders.
 
 If you want to initialize a structure with an invalid GPIO number, use
 some negative number (perhaps "-EINVAL"); that will never be valid.  To
-test if a number could reference a GPIO, you may use this predicate:
+test if such number from such a structure could reference a GPIO, you
+may use this predicate:
 
 	int gpio_is_valid(int number);
 
 A number that's not valid will be rejected by calls which may request
 or free GPIOs (see below).  Other numbers may also be rejected; for
-example, a number might be valid but unused on a given board.
-
-Whether a platform supports multiple GPIO controllers is currently a
-platform-specific implementation issue.
+example, a number might be valid but temporarily unused on a given board.
 
+Whether a platform supports multiple GPIO controllers is a platform-specific
+implementation issue, as are whether that support can leave "holes" in the space
+of GPIO numbers, and whether new controllers can be added at runtime.  Such issues
+can affect things including whether adjacent GPIO numbers are both valid.
 
 Using GPIOs
 -----------
@@ -480,12 +482,16 @@ To support this framework, a platform's Kconfig will "select" either
 ARCH_REQUIRE_GPIOLIB or ARCH_WANT_OPTIONAL_GPIOLIB
 and arrange that its <asm/gpio.h> includes <asm-generic/gpio.h> and defines
 three functions: gpio_get_value(), gpio_set_value(), and gpio_cansleep().
-They may also want to provide a custom value for ARCH_NR_GPIOS.
 
-ARCH_REQUIRE_GPIOLIB means that the gpio-lib code will always get compiled
+It may also provide a custom value for ARCH_NR_GPIOS, so that it better
+reflects the number of GPIOs in actual use on that platform, without
+wasting static table space.  (It should count both built-in/SoC GPIOs and
+also ones on GPIO expanders.
+
+ARCH_REQUIRE_GPIOLIB means that the gpiolib code will always get compiled
 into the kernel on that architecture.
 
-ARCH_WANT_OPTIONAL_GPIOLIB means the gpio-lib code defaults to off and the user
+ARCH_WANT_OPTIONAL_GPIOLIB means the gpiolib code defaults to off and the user
 can enable it and build it into the kernel optionally.
 
 If neither of these options are selected, the platform does not support

Documentation/hwmon/sysfs-interface

@@ -91,12 +91,11 @@ name		The chip name.
 		I2C devices get this attribute created automatically.
 		RO
 
-update_rate	The rate at which the chip will update readings.
+update_interval	The interval at which the chip will update readings.
 		Unit: millisecond
 		RW
-		Some devices have a variable update rate. This attribute
-		can be used to change the update rate to the desired
-		frequency.
+		Some devices have a variable update rate or interval.
+		This attribute can be used to change it to the desired value.
 
 
 ************

Documentation/kernel-doc-nano-HOWTO.txt

@@ -345,5 +345,10 @@ documentation, in <filename>, for the functions listed.
 section titled <section title> from <filename>.
 Spaces are allowed in <section title>; do not quote the <section title>.
 
+!C<filename> is replaced by nothing, but makes the tools check that
+all DOC: sections and documented functions, symbols, etc. are used.
+This makes sense to use when you use !F/!P only and want to verify
+that all documentation is included.
+
 Tim.
 */ <twaugh@redhat.com>

Documentation/kernel-parameters.txt

@@ -1974,15 +1974,18 @@ and is between 256 and 4096 characters. It is defined in the file
 		force	Enable ASPM even on devices that claim not to support it.
 			WARNING: Forcing ASPM on may cause system lockups.
 
+	pcie_ports=	[PCIE] PCIe ports handling:
+		auto	Ask the BIOS whether or not to use native PCIe services
+			associated with PCIe ports (PME, hot-plug, AER).  Use
+			them only if that is allowed by the BIOS.
+		native	Use native PCIe services associated with PCIe ports
+			unconditionally.
+		compat	Treat PCIe ports as PCI-to-PCI bridges, disable the PCIe
+			ports driver.
+
 	pcie_pme=	[PCIE,PM] Native PCIe PME signaling options:
-			Format: {auto|force}[,nomsi]
-		auto	Use native PCIe PME signaling if the BIOS allows the
-			kernel to control PCIe config registers of root ports.
-		force	Use native PCIe PME signaling even if the BIOS refuses
-			to allow the kernel to control the relevant PCIe config
-			registers.
 		nomsi	Do not use MSI for native PCIe PME signaling (this makes
-			all PCIe root ports use INTx for everything).
+			all PCIe root ports use INTx for all services).
 
 	pcmv=		[HW,PCMCIA] BadgePAD 4
 

Documentation/mutex-design.txt

@@ -9,7 +9,7 @@ firstly, there's nothing wrong with semaphores. But if the simpler
 mutex semantics are sufficient for your code, then there are a couple
 of advantages of mutexes:
 
- - 'struct mutex' is smaller on most architectures: .e.g on x86,
+ - 'struct mutex' is smaller on most architectures: E.g. on x86,
    'struct semaphore' is 20 bytes, 'struct mutex' is 16 bytes.
    A smaller structure size means less RAM footprint, and better
    CPU-cache utilization.
@@ -136,3 +136,4 @@ the APIs of 'struct mutex' have been streamlined:
  void mutex_lock_nested(struct mutex *lock, unsigned int subclass);
  int  mutex_lock_interruptible_nested(struct mutex *lock,
                                       unsigned int subclass);
+ int atomic_dec_and_mutex_lock(atomic_t *cnt, struct mutex *lock);

Documentation/power/regulator/overview.txt

@@ -13,7 +13,7 @@ regulators (where voltage output is controllable) and current sinks (where
 current limit is controllable).
 
 (C) 2008  Wolfson Microelectronics PLC.
-Author: Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Author: Liam Girdwood <lrg@slimlogic.co.uk>
 
 
 Nomenclature

Documentation/sound/alsa/HD-Audio-Models.txt

@@ -296,6 +296,7 @@ Conexant 5051
 Conexant 5066
 =============
   laptop	Basic Laptop config (default)
+  hp-laptop	HP laptops, e g G60
   dell-laptop	Dell laptops
   dell-vostro	Dell Vostro
   olpc-xo-1_5	OLPC XO 1.5

Documentation/workqueue.txt

@@ -0,0 +1,380 @@
+
+Concurrency Managed Workqueue (cmwq)
+
+September, 2010		Tejun Heo <tj@kernel.org>
+			Florian Mickler <florian@mickler.org>
+
+CONTENTS
+
+1. Introduction
+2. Why cmwq?
+3. The Design
+4. Application Programming Interface (API)
+5. Example Execution Scenarios
+6. Guidelines
+
+
+1. Introduction
+
+There are many cases where an asynchronous process execution context
+is needed and the workqueue (wq) API is the most commonly used
+mechanism for such cases.
+
+When such an asynchronous execution context is needed, a work item
+describing which function to execute is put on a queue.  An
+independent thread serves as the asynchronous execution context.  The
+queue is called workqueue and the thread is called worker.
+
+While there are work items on the workqueue the worker executes the
+functions associated with the work items one after the other.  When
+there is no work item left on the workqueue the worker becomes idle.
+When a new work item gets queued, the worker begins executing again.
+
+
+2. Why cmwq?
+
+In the original wq implementation, a multi threaded (MT) wq had one
+worker thread per CPU and a single threaded (ST) wq had one worker
+thread system-wide.  A single MT wq needed to keep around the same
+number of workers as the number of CPUs.  The kernel grew a lot of MT
+wq users over the years and with the number of CPU cores continuously
+rising, some systems saturated the default 32k PID space just booting
+up.
+
+Although MT wq wasted a lot of resource, the level of concurrency
+provided was unsatisfactory.  The limitation was common to both ST and
+MT wq albeit less severe on MT.  Each wq maintained its own separate
+worker pool.  A MT wq could provide only one execution context per CPU
+while a ST wq one for the whole system.  Work items had to compete for
+those very limited execution contexts leading to various problems
+including proneness to deadlocks around the single execution context.
+
+The tension between the provided level of concurrency and resource
+usage also forced its users to make unnecessary tradeoffs like libata
+choosing to use ST wq for polling PIOs and accepting an unnecessary
+limitation that no two polling PIOs can progress at the same time.  As
+MT wq don't provide much better concurrency, users which require
+higher level of concurrency, like async or fscache, had to implement
+their own thread pool.
+
+Concurrency Managed Workqueue (cmwq) is a reimplementation of wq with
+focus on the following goals.
+
+* Maintain compatibility with the original workqueue API.
+
+* Use per-CPU unified worker pools shared by all wq to provide
+  flexible level of concurrency on demand without wasting a lot of
+  resource.
+
+* Automatically regulate worker pool and level of concurrency so that
+  the API users don't need to worry about such details.
+
+
+3. The Design
+
+In order to ease the asynchronous execution of functions a new
+abstraction, the work item, is introduced.
+
+A work item is a simple struct that holds a pointer to the function
+that is to be executed asynchronously.  Whenever a driver or subsystem
+wants a function to be executed asynchronously it has to set up a work
+item pointing to that function and queue that work item on a
+workqueue.
+
+Special purpose threads, called worker threads, execute the functions
+off of the queue, one after the other.  If no work is queued, the
+worker threads become idle.  These worker threads are managed in so
+called thread-pools.
+
+The cmwq design differentiates between the user-facing workqueues that
+subsystems and drivers queue work items on and the backend mechanism
+which manages thread-pool and processes the queued work items.
+
+The backend is called gcwq.  There is one gcwq for each possible CPU
+and one gcwq to serve work items queued on unbound workqueues.
+
+Subsystems and drivers can create and queue work items through special
+workqueue API functions as they see fit. They can influence some
+aspects of the way the work items are executed by setting flags on the
+workqueue they are putting the work item on. These flags include
+things like CPU locality, reentrancy, concurrency limits and more. To
+get a detailed overview refer to the API description of
+alloc_workqueue() below.
+
+When a work item is queued to a workqueue, the target gcwq is
+determined according to the queue parameters and workqueue attributes
+and appended on the shared worklist of the gcwq.  For example, unless
+specifically overridden, a work item of a bound workqueue will be
+queued on the worklist of exactly that gcwq that is associated to the
+CPU the issuer is running on.
+
+For any worker pool implementation, managing the concurrency level
+(how many execution contexts are active) is an important issue.  cmwq
+tries to keep the concurrency at a minimal but sufficient level.
+Minimal to save resources and sufficient in that the system is used at
+its full capacity.
+
+Each gcwq bound to an actual CPU implements concurrency management by
+hooking into the scheduler.  The gcwq is notified whenever an active
+worker wakes up or sleeps and keeps track of the number of the
+currently runnable workers.  Generally, work items are not expected to
+hog a CPU and consume many cycles.  That means maintaining just enough
+concurrency to prevent work processing from stalling should be
+optimal.  As long as there are one or more runnable workers on the
+CPU, the gcwq doesn't start execution of a new work, but, when the
+last running worker goes to sleep, it immediately schedules a new
+worker so that the CPU doesn't sit idle while there are pending work
+items.  This allows using a minimal number of workers without losing
+execution bandwidth.
+
+Keeping idle workers around doesn't cost other than the memory space
+for kthreads, so cmwq holds onto idle ones for a while before killing
+them.
+
+For an unbound wq, the above concurrency management doesn't apply and
+the gcwq for the pseudo unbound CPU tries to start executing all work
+items as soon as possible.  The responsibility of regulating
+concurrency level is on the users.  There is also a flag to mark a
+bound wq to ignore the concurrency management.  Please refer to the
+API section for details.
+
+Forward progress guarantee relies on that workers can be created when
+more execution contexts are necessary, which in turn is guaranteed
+through the use of rescue workers.  All work items which might be used
+on code paths that handle memory reclaim are required to be queued on
+wq's that have a rescue-worker reserved for execution under memory
+pressure.  Else it is possible that the thread-pool deadlocks waiting
+for execution contexts to free up.
+
+
+4. Application Programming Interface (API)
+
+alloc_workqueue() allocates a wq.  The original create_*workqueue()
+functions are deprecated and scheduled for removal.  alloc_workqueue()
+takes three arguments - @name, @flags and @max_active.  @name is the
+name of the wq and also used as the name of the rescuer thread if
+there is one.
+
+A wq no longer manages execution resources but serves as a domain for
+forward progress guarantee, flush and work item attributes.  @flags
+and @max_active control how work items are assigned execution
+resources, scheduled and executed.
+
+@flags:
+
+  WQ_NON_REENTRANT
+
+	By default, a wq guarantees non-reentrance only on the same
+	CPU.  A work item may not be executed concurrently on the same
+	CPU by multiple workers but is allowed to be executed
+	concurrently on multiple CPUs.  This flag makes sure
+	non-reentrance is enforced across all CPUs.  Work items queued
+	to a non-reentrant wq are guaranteed to be executed by at most
+	one worker system-wide at any given time.
+
+  WQ_UNBOUND
+
+	Work items queued to an unbound wq are served by a special
+	gcwq which hosts workers which are not bound to any specific
+	CPU.  This makes the wq behave as a simple execution context
+	provider without concurrency management.  The unbound gcwq
+	tries to start execution of work items as soon as possible.
+	Unbound wq sacrifices locality but is useful for the following
+	cases.
+
+	* Wide fluctuation in the concurrency level requirement is
+	  expected and using bound wq may end up creating large number
+	  of mostly unused workers across different CPUs as the issuer
+	  hops through different CPUs.
+
+	* Long running CPU intensive workloads which can be better
+	  managed by the system scheduler.
+
+  WQ_FREEZEABLE
+
+	A freezeable wq participates in the freeze phase of the system
+	suspend operations.  Work items on the wq are drained and no
+	new work item starts execution until thawed.
+
+  WQ_RESCUER
+
+	All wq which might be used in the memory reclaim paths _MUST_
+	have this flag set.  This reserves one worker exclusively for
+	the execution of this wq under memory pressure.
+
+  WQ_HIGHPRI
+
+	Work items of a highpri wq are queued at the head of the
+	worklist of the target gcwq and start execution regardless of
+	the current concurrency level.  In other words, highpri work
+	items will always start execution as soon as execution
+	resource is available.
+
+	Ordering among highpri work items is preserved - a highpri
+	work item queued after another highpri work item will start
+	execution after the earlier highpri work item starts.
+
+	Although highpri work items are not held back by other
+	runnable work items, they still contribute to the concurrency
+	level.  Highpri work items in runnable state will prevent
+	non-highpri work items from starting execution.
+
+	This flag is meaningless for unbound wq.
+
+  WQ_CPU_INTENSIVE
+
+	Work items of a CPU intensive wq do not contribute to the
+	concurrency level.  In other words, runnable CPU intensive
+	work items will not prevent other work items from starting
+	execution.  This is useful for bound work items which are
+	expected to hog CPU cycles so that their execution is
+	regulated by the system scheduler.
+
+	Although CPU intensive work items don't contribute to the
+	concurrency level, start of their executions is still
+	regulated by the concurrency management and runnable
+	non-CPU-intensive work items can delay execution of CPU
+	intensive work items.
+
+	This flag is meaningless for unbound wq.
+
+  WQ_HIGHPRI | WQ_CPU_INTENSIVE
+
+	This combination makes the wq avoid interaction with
+	concurrency management completely and behave as a simple
+	per-CPU execution context provider.  Work items queued on a
+	highpri CPU-intensive wq start execution as soon as resources
+	are available and don't affect execution of other work items.
+
+@max_active:
+
+@max_active determines the maximum number of execution contexts per
+CPU which can be assigned to the work items of a wq.  For example,
+with @max_active of 16, at most 16 work items of the wq can be
+executing at the same time per CPU.
+
+Currently, for a bound wq, the maximum limit for @max_active is 512
+and the default value used when 0 is specified is 256.  For an unbound
+wq, the limit is higher of 512 and 4 * num_possible_cpus().  These
+values are chosen sufficiently high such that they are not the
+limiting factor while providing protection in runaway cases.
+
+The number of active work items of a wq is usually regulated by the
+users of the wq, more specifically, by how many work items the users
+may queue at the same time.  Unless there is a specific need for
+throttling the number of active work items, specifying '0' is
+recommended.
+
+Some users depend on the strict execution ordering of ST wq.  The
+combination of @max_active of 1 and WQ_UNBOUND is used to achieve this
+behavior.  Work items on such wq are always queued to the unbound gcwq
+and only one work item can be active at any given time thus achieving
+the same ordering property as ST wq.
+
+
+5. Example Execution Scenarios
+
+The following example execution scenarios try to illustrate how cmwq
+behave under different configurations.
+
+ Work items w0, w1, w2 are queued to a bound wq q0 on the same CPU.
+ w0 burns CPU for 5ms then sleeps for 10ms then burns CPU for 5ms
+ again before finishing.  w1 and w2 burn CPU for 5ms then sleep for
+ 10ms.
+
+Ignoring all other tasks, works and processing overhead, and assuming
+simple FIFO scheduling, the following is one highly simplified version
+of possible sequences of events with the original wq.
+
+ TIME IN MSECS	EVENT
+ 0		w0 starts and burns CPU
+ 5		w0 sleeps
+ 15		w0 wakes up and burns CPU
+ 20		w0 finishes
+ 20		w1 starts and burns CPU
+ 25		w1 sleeps
+ 35		w1 wakes up and finishes
+ 35		w2 starts and burns CPU
+ 40		w2 sleeps
+ 50		w2 wakes up and finishes
+
+And with cmwq with @max_active >= 3,
+
+ TIME IN MSECS	EVENT
+ 0		w0 starts and burns CPU
+ 5		w0 sleeps
+ 5		w1 starts and burns CPU
+ 10		w1 sleeps
+ 10		w2 starts and burns CPU
+ 15		w2 sleeps
+ 15		w0 wakes up and burns CPU
+ 20		w0 finishes
+ 20		w1 wakes up and finishes
+ 25		w2 wakes up and finishes
+
+If @max_active == 2,
+
+ TIME IN MSECS	EVENT
+ 0		w0 starts and burns CPU
+ 5		w0 sleeps
+ 5		w1 starts and burns CPU
+ 10		w1 sleeps
+ 15		w0 wakes up and burns CPU
+ 20		w0 finishes
+ 20		w1 wakes up and finishes
+ 20		w2 starts and burns CPU
+ 25		w2 sleeps
+ 35		w2 wakes up and finishes
+
+Now, let's assume w1 and w2 are queued to a different wq q1 which has
+WQ_HIGHPRI set,
+
+ TIME IN MSECS	EVENT
+ 0		w1 and w2 start and burn CPU
+ 5		w1 sleeps
+ 10		w2 sleeps
+ 10		w0 starts and burns CPU
+ 15		w0 sleeps
+ 15		w1 wakes up and finishes
+ 20		w2 wakes up and finishes
+ 25		w0 wakes up and burns CPU
+ 30		w0 finishes
+
+If q1 has WQ_CPU_INTENSIVE set,
+
+ TIME IN MSECS	EVENT
+ 0		w0 starts and burns CPU
+ 5		w0 sleeps
+ 5		w1 and w2 start and burn CPU
+ 10		w1 sleeps
+ 15		w2 sleeps
+ 15		w0 wakes up and burns CPU
+ 20		w0 finishes
+ 20		w1 wakes up and finishes
+ 25		w2 wakes up and finishes
+
+
+6. Guidelines
+
+* Do not forget to use WQ_RESCUER if a wq may process work items which
+  are used during memory reclaim.  Each wq with WQ_RESCUER set has one
+  rescuer thread reserved for it.  If there is dependency among
+  multiple work items used during memory reclaim, they should be
+  queued to separate wq each with WQ_RESCUER.
+
+* Unless strict ordering is required, there is no need to use ST wq.
+
+* Unless there is a specific need, using 0 for @max_active is
+  recommended.  In most use cases, concurrency level usually stays
+  well under the default limit.
+
+* A wq serves as a domain for forward progress guarantee (WQ_RESCUER),
+  flush and work item attributes.  Work items which are not involved
+  in memory reclaim and don't need to be flushed as a part of a group
+  of work items, and don't require any special attribute, can use one
+  of the system wq.  There is no difference in execution
+  characteristics between using a dedicated wq and a system wq.
+
+* Unless work items are expected to consume a huge amount of CPU
+  cycles, using a bound wq is usually beneficial due to the increased
+  level of locality in wq operations and work item execution.

MAINTAINERS

@@ -1135,7 +1135,7 @@ ATLX ETHERNET DRIVERS
 M:	Jay Cliburn <jcliburn@gmail.com>
 M:	Chris Snook <chris.snook@gmail.com>
 M:	Jie Yang <jie.yang@atheros.com>
-L:	atl1-devel@lists.sourceforge.net
+L:	netdev@vger.kernel.org
 W:	http://sourceforge.net/projects/atl1
 W:	http://atl1.sourceforge.net
 S:	Maintained
@@ -1220,7 +1220,7 @@ F:	drivers/auxdisplay/
 F:	include/linux/cfag12864b.h
 
 AVR32 ARCHITECTURE
-M:	Haavard Skinnemoen <hskinnemoen@atmel.com>
+M:	Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
 W:	http://www.atmel.com/products/AVR32/
 W:	http://avr32linux.org/
 W:	http://avrfreaks.net/
@@ -1228,7 +1228,7 @@ S:	Supported
 F:	arch/avr32/
 
 AVR32/AT32AP MACHINE SUPPORT
-M:	Haavard Skinnemoen <hskinnemoen@atmel.com>
+M:	Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
 S:	Supported
 F:	arch/avr32/mach-at32ap/
 
@@ -1445,6 +1445,16 @@ S:	Maintained
 F:	Documentation/video4linux/cafe_ccic
 F:	drivers/media/video/cafe_ccic*
 
+CAIF NETWORK LAYER
+M:	Sjur Braendeland <sjur.brandeland@stericsson.com>
+L:	netdev@vger.kernel.org
+S:	Supported
+F:	Documentation/networking/caif/
+F:	drivers/net/caif/
+F:	include/linux/caif/
+F:	include/net/caif/
+F:	net/caif/
+
 CALGARY x86-64 IOMMU
 M:	Muli Ben-Yehuda <muli@il.ibm.com>
 M:	"Jon D. Mason" <jdmason@kudzu.us>
@@ -2189,6 +2199,12 @@ W:	http://acpi4asus.sf.net
 S:	Maintained
 F:	drivers/platform/x86/eeepc-laptop.c
 
+EFIFB FRAMEBUFFER DRIVER
+L:	linux-fbdev@vger.kernel.org
+M:	Peter Jones <pjones@redhat.com>
+S:	Maintained
+F:	drivers/video/efifb.c
+
 EFS FILESYSTEM
 W:	http://aeschi.ch.eu.org/efs/
 S:	Orphan
@@ -2201,6 +2217,12 @@ L:	linux-rdma@vger.kernel.org
 S:	Supported
 F:	drivers/infiniband/hw/ehca/
 
+EHEA (IBM pSeries eHEA 10Gb ethernet adapter) DRIVER
+M:	Breno Leitao <leitao@linux.vnet.ibm.com>
+L:	netdev@vger.kernel.org
+S:	Maintained
+F:	drivers/net/ehea/
+
 EMBEDDED LINUX
 M:	Paul Gortmaker <paul.gortmaker@windriver.com>
 M:	Matt Mackall <mpm@selenic.com>
@@ -2641,9 +2663,12 @@ S:	Maintained
 F:	drivers/media/video/gspca/
 
 HARDWARE MONITORING
+M:	Jean Delvare <khali@linux-fr.org>
+M:	Guenter Roeck <guenter.roeck@ericsson.com>
 L:	lm-sensors@lm-sensors.org
 W:	http://www.lm-sensors.org/
-S:	Orphan
+T:	quilt kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-hwmon/
+S:	Maintained
 F:	Documentation/hwmon/
 F:	drivers/hwmon/
 F:	include/linux/hwmon*.h
@@ -2781,11 +2806,6 @@ S:	Maintained
 F:	arch/x86/kernel/hpet.c
 F:	arch/x86/include/asm/hpet.h
 
-HPET:	ACPI
-M:	Bob Picco <bob.picco@hp.com>
-S:	Maintained
-F:	drivers/char/hpet.c
-
 HPFS FILESYSTEM
 M:	Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz>
 W:	http://artax.karlin.mff.cuni.cz/~mikulas/vyplody/hpfs/index-e.cgi
@@ -3398,7 +3418,7 @@ F:	drivers/s390/kvm/
 
 KEXEC
 M:	Eric Biederman <ebiederm@xmission.com>
-W:	http://ftp.kernel.org/pub/linux/kernel/people/horms/kexec-tools/
+W:	http://kernel.org/pub/linux/utils/kernel/kexec/
 L:	kexec@lists.infradead.org
 S:	Maintained
 F:	include/linux/kexec.h
@@ -3885,10 +3905,8 @@ F:	Documentation/serial/moxa-smartio
 F:	drivers/char/mxser.*
 
 MSI LAPTOP SUPPORT
-M:	Lennart Poettering <mzxreary@0pointer.de>
+M:	Lee, Chun-Yi <jlee@novell.com>
 L:	platform-driver-x86@vger.kernel.org
-W:	https://tango.0pointer.de/mailman/listinfo/s270-linux
-W:	http://0pointer.de/lennart/tchibo.html
 S:	Maintained
 F:	drivers/platform/x86/msi-laptop.c
 
@@ -3923,13 +3941,12 @@ F:	Documentation/sound/oss/MultiSound
 F:	sound/oss/msnd*
 
 MULTITECH MULTIPORT CARD (ISICOM)
-M:	Jiri Slaby <jirislaby@gmail.com>
-S:	Maintained
+S:	Orphan
 F:	drivers/char/isicom.c
 F:	include/linux/isicom.h
 
 MUSB MULTIPOINT HIGH SPEED DUAL-ROLE CONTROLLER
-M:	Felipe Balbi <felipe.balbi@nokia.com>
+M:	Felipe Balbi <balbi@ti.com>
 L:	linux-usb@vger.kernel.org
 T:	git git://gitorious.org/usb/usb.git
 S:	Maintained
@@ -4227,7 +4244,7 @@ S:	Maintained
 F:	drivers/char/hw_random/omap-rng.c
 
 OMAP USB SUPPORT
-M:	Felipe Balbi <felipe.balbi@nokia.com>
+M:	Felipe Balbi <balbi@ti.com>
 M:	David Brownell <dbrownell@users.sourceforge.net>
 L:	linux-usb@vger.kernel.org
 L:	linux-omap@vger.kernel.org
@@ -4604,7 +4621,7 @@ F:	include/linux/preempt.h
 PRISM54 WIRELESS DRIVER
 M:	"Luis R. Rodriguez" <mcgrof@gmail.com>
 L:	linux-wireless@vger.kernel.org
-W:	http://prism54.org
+W:	http://wireless.kernel.org/en/users/Drivers/p54
 S:	Obsolete
 F:	drivers/net/wireless/prism54/
 
@@ -4805,6 +4822,7 @@ RCUTORTURE MODULE
 M:	Josh Triplett <josh@freedesktop.org>
 M:	"Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
 S:	Supported
+T:	git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-2.6-rcu.git
 F:	Documentation/RCU/torture.txt
 F:	kernel/rcutorture.c
 
@@ -4829,6 +4847,7 @@ M:	Dipankar Sarma <dipankar@in.ibm.com>
 M:	"Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
 W:	http://www.rdrop.com/users/paulmck/rclock/
 S:	Supported
+T:	git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-2.6-rcu.git
 F:	Documentation/RCU/
 F:	include/linux/rcu*
 F:	include/linux/srcu*
@@ -4836,12 +4855,10 @@ F:	kernel/rcu*
 F:	kernel/srcu*
 X:	kernel/rcutorture.c
 
-REAL TIME CLOCK DRIVER
+REAL TIME CLOCK DRIVER (LEGACY)
 M:	Paul Gortmaker <p_gortmaker@yahoo.com>
 S:	Maintained
-F:	Documentation/rtc.txt
-F:	drivers/rtc/
-F:	include/linux/rtc.h
+F:	drivers/char/rtc.c
 
 REAL TIME CLOCK (RTC) SUBSYSTEM
 M:	Alessandro Zummo <a.zummo@towertech.it>

Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 36
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc5
 NAME = Sheep on Meth
 
 # *DOCUMENTATION*

arch/Kconfig

@@ -32,8 +32,9 @@ config HAVE_OPROFILE
 
 config KPROBES
 	bool "Kprobes"
-	depends on KALLSYMS && MODULES
+	depends on MODULES
 	depends on HAVE_KPROBES
+	select KALLSYMS
 	help
 	  Kprobes allows you to trap at almost any kernel address and
 	  execute a callback function.  register_kprobe() establishes
@@ -45,7 +46,6 @@ config OPTPROBES
 	def_bool y
 	depends on KPROBES && HAVE_OPTPROBES
 	depends on !PREEMPT
-	select KALLSYMS_ALL
 
 config HAVE_EFFICIENT_UNALIGNED_ACCESS
 	bool

arch/alpha/include/asm/cache.h

@@ -17,7 +17,6 @@
 # define L1_CACHE_SHIFT     5
 #endif
 
-#define L1_CACHE_ALIGN(x)  (((x)+(L1_CACHE_BYTES-1))&~(L1_CACHE_BYTES-1))
 #define SMP_CACHE_BYTES    L1_CACHE_BYTES
 
 #endif

arch/alpha/include/asm/cacheflush.h

@@ -43,6 +43,8 @@ extern void smp_imb(void);
 /* ??? Ought to use this in arch/alpha/kernel/signal.c too.  */
 
 #ifndef CONFIG_SMP
+#include <linux/sched.h>
+
 extern void __load_new_mm_context(struct mm_struct *);
 static inline void
 flush_icache_user_range(struct vm_area_struct *vma, struct page *page,

arch/alpha/include/asm/unistd.h

@@ -449,10 +449,13 @@
 #define __NR_pwritev			491
 #define __NR_rt_tgsigqueueinfo		492
 #define __NR_perf_event_open		493
+#define __NR_fanotify_init		494
+#define __NR_fanotify_mark		495
+#define __NR_prlimit64			496
 
 #ifdef __KERNEL__
 
-#define NR_SYSCALLS			494
+#define NR_SYSCALLS			497
 
 #define __ARCH_WANT_IPC_PARSE_VERSION
 #define __ARCH_WANT_OLD_READDIR
@@ -463,6 +466,7 @@
 #define __ARCH_WANT_SYS_OLD_GETRLIMIT
 #define __ARCH_WANT_SYS_OLDUMOUNT
 #define __ARCH_WANT_SYS_SIGPENDING
+#define __ARCH_WANT_SYS_RT_SIGSUSPEND
 
 /* "Conditional" syscalls.  What we want is
 

arch/alpha/kernel/entry.S

@@ -317,14 +317,14 @@ ret_from_sys_call:
 	ldq	$0, SP_OFF($sp)
 	and	$0, 8, $0
 	beq	$0, restore_all
-ret_from_reschedule:
+ret_to_user:
 	/* Make sure need_resched and sigpending don't change between
 		sampling and the rti.  */
 	lda	$16, 7
 	call_pal PAL_swpipl
 	ldl	$5, TI_FLAGS($8)
 	and	$5, _TIF_WORK_MASK, $2
-	bne	$5, work_pending
+	bne	$2, work_pending
 restore_all:
 	RESTORE_ALL
 	call_pal PAL_rti
@@ -363,7 +363,7 @@ $ret_success:
  *       $8: current.
  *      $19: The old syscall number, or zero if this is not a return
  *           from a syscall that errored and is possibly restartable.
- *      $20: Error indication.
+ *      $20: The old a3 value
  */
 
 	.align	4
@@ -392,12 +392,18 @@ $work_resched:
 
 $work_notifysig:
 	mov	$sp, $16
-	br	$1, do_switch_stack
+	bsr	$1, do_switch_stack
 	mov	$sp, $17
 	mov	$5, $18
+	mov	$19, $9		/* save old syscall number */
+	mov	$20, $10	/* save old a3 */
+	and	$5, _TIF_SIGPENDING, $2
+	cmovne	$2, 0, $9	/* we don't want double syscall restarts */
 	jsr	$26, do_notify_resume
+	mov	$9, $19
+	mov	$10, $20
 	bsr	$1, undo_switch_stack
-	br	restore_all
+	br	ret_to_user
 .end work_pending
 
 /*
@@ -430,6 +436,7 @@ strace:
 	beq	$1, 1f
 	ldq	$27, 0($2)
 1:	jsr	$26, ($27), sys_gettimeofday
+ret_from_straced:
 	ldgp	$gp, 0($26)
 
 	/* check return.. */
@@ -757,11 +764,15 @@ sys_vfork:
 	.ent	sys_sigreturn
 sys_sigreturn:
 	.prologue 0
+	lda	$9, ret_from_straced
+	cmpult	$26, $9, $9
 	mov	$sp, $17
 	lda	$18, -SWITCH_STACK_SIZE($sp)
 	lda	$sp, -SWITCH_STACK_SIZE($sp)
 	jsr	$26, do_sigreturn
-	br	$1, undo_switch_stack
+	bne	$9, 1f
+	jsr	$26, syscall_trace
+1:	br	$1, undo_switch_stack
 	br	ret_from_sys_call
 .end sys_sigreturn
 
@@ -770,46 +781,18 @@ sys_sigreturn:
 	.ent	sys_rt_sigreturn
 sys_rt_sigreturn:
 	.prologue 0
+	lda	$9, ret_from_straced
+	cmpult	$26, $9, $9
 	mov	$sp, $17
 	lda	$18, -SWITCH_STACK_SIZE($sp)
 	lda	$sp, -SWITCH_STACK_SIZE($sp)
 	jsr	$26, do_rt_sigreturn
-	br	$1, undo_switch_stack
+	bne	$9, 1f
+	jsr	$26, syscall_trace
+1:	br	$1, undo_switch_stack
 	br	ret_from_sys_call
 .end sys_rt_sigreturn
 
-	.align	4
-	.globl	sys_sigsuspend
-	.ent	sys_sigsuspend
-sys_sigsuspend:
-	.prologue 0
-	mov	$sp, $17
-	br	$1, do_switch_stack
-	mov	$sp, $18
-	subq	$sp, 16, $sp
-	stq	$26, 0($sp)
-	jsr	$26, do_sigsuspend
-	ldq	$26, 0($sp)
-	lda	$sp, SWITCH_STACK_SIZE+16($sp)
-	ret
-.end sys_sigsuspend
-
-	.align	4
-	.globl	sys_rt_sigsuspend
-	.ent	sys_rt_sigsuspend
-sys_rt_sigsuspend:
-	.prologue 0
-	mov	$sp, $18
-	br	$1, do_switch_stack
-	mov	$sp, $19
-	subq	$sp, 16, $sp
-	stq	$26, 0($sp)
-	jsr	$26, do_rt_sigsuspend
-	ldq	$26, 0($sp)
-	lda	$sp, SWITCH_STACK_SIZE+16($sp)
-	ret
-.end sys_rt_sigsuspend
-
 	.align	4
 	.globl	sys_sethae
 	.ent	sys_sethae

arch/alpha/kernel/err_ev6.c

@@ -90,11 +90,13 @@ static int
 ev6_parse_cbox(u64 c_addr, u64 c1_syn, u64 c2_syn, 
 	       u64 c_stat, u64 c_sts, int print)
 {
-	char *sourcename[] = { "UNKNOWN", "UNKNOWN", "UNKNOWN",
-			       "MEMORY", "BCACHE", "DCACHE", 
-			       "BCACHE PROBE", "BCACHE PROBE" };
-	char *streamname[] = { "D", "I" };
-	char *bitsname[] = { "SINGLE", "DOUBLE" };
+	static const char * const sourcename[] = {
+		"UNKNOWN", "UNKNOWN", "UNKNOWN",
+		"MEMORY", "BCACHE", "DCACHE",
+		"BCACHE PROBE", "BCACHE PROBE"
+	};
+	static const char * const streamname[] = { "D", "I" };
+	static const char * const bitsname[] = { "SINGLE", "DOUBLE" };
 	int status = MCHK_DISPOSITION_REPORT;
 	int source = -1, stream = -1, bits = -1;
 

arch/alpha/kernel/err_marvel.c

@@ -109,7 +109,7 @@ marvel_print_err_cyc(u64 err_cyc)
 #define IO7__ERR_CYC__CYCLE__M	(0x7)
 
 	printk("%s        Packet In Error: %s\n"
-	       "%s        Error in %s, cycle %ld%s%s\n",
+	       "%s        Error in %s, cycle %lld%s%s\n",
 	       err_print_prefix, 
 	       packet_desc[EXTRACT(err_cyc, IO7__ERR_CYC__PACKET)],
 	       err_print_prefix,
@@ -313,7 +313,7 @@ marvel_print_po7_ugbge_sym(u64 ugbge_sym)
 	}
 
 	printk("%s      Up Hose Garbage Symptom:\n"
-	       "%s        Source Port: %ld - Dest PID: %ld - OpCode: %s\n", 
+	       "%s        Source Port: %lld - Dest PID: %lld - OpCode: %s\n",
 	       err_print_prefix,
 	       err_print_prefix, 
 	       EXTRACT(ugbge_sym, IO7__PO7_UGBGE_SYM__UPH_SRC_PORT),
@@ -552,7 +552,7 @@ marvel_print_pox_spl_cmplt(u64 spl_cmplt)
 #define IO7__POX_SPLCMPLT__REM_BYTE_COUNT__M	(0xfff)
 
 	printk("%s      Split Completion Error:\n"	
-	       "%s         Source (Bus:Dev:Func): %ld:%ld:%ld\n",
+	       "%s         Source (Bus:Dev:Func): %lld:%lld:%lld\n",
 	       err_print_prefix,
 	       err_print_prefix,
 	       EXTRACT(spl_cmplt, IO7__POX_SPLCMPLT__SOURCE_BUS),
@@ -589,22 +589,23 @@ marvel_print_pox_spl_cmplt(u64 spl_cmplt)
 static void
 marvel_print_pox_trans_sum(u64 trans_sum)
 {
-	char *pcix_cmd[] = { "Interrupt Acknowledge",
-			     "Special Cycle",
-			     "I/O Read",
-			     "I/O Write",
-			     "Reserved",
-			     "Reserved / Device ID Message",
-			     "Memory Read",
-			     "Memory Write",
-			     "Reserved / Alias to Memory Read Block",
-			     "Reserved / Alias to Memory Write Block",
-			     "Configuration Read",
-			     "Configuration Write",
-			     "Memory Read Multiple / Split Completion",
-			     "Dual Address Cycle",
-			     "Memory Read Line / Memory Read Block",
-			     "Memory Write and Invalidate / Memory Write Block"
+	static const char * const pcix_cmd[] = {
+		"Interrupt Acknowledge",
+		"Special Cycle",
+		"I/O Read",
+		"I/O Write",
+		"Reserved",
+		"Reserved / Device ID Message",
+		"Memory Read",
+		"Memory Write",
+		"Reserved / Alias to Memory Read Block",
+		"Reserved / Alias to Memory Write Block",
+		"Configuration Read",
+		"Configuration Write",
+		"Memory Read Multiple / Split Completion",
+		"Dual Address Cycle",
+		"Memory Read Line / Memory Read Block",
+		"Memory Write and Invalidate / Memory Write Block"
 	};
 
 #define IO7__POX_TRANSUM__PCI_ADDR__S		(0)

arch/alpha/kernel/err_titan.c

@@ -75,8 +75,12 @@ titan_parse_p_serror(int which, u64 serror, int print)
 	int status = MCHK_DISPOSITION_REPORT;
 
 #ifdef CONFIG_VERBOSE_MCHECK
-	char *serror_src[] = {"GPCI", "APCI", "AGP HP", "AGP LP"};
-	char *serror_cmd[] = {"DMA Read", "DMA RMW", "SGTE Read", "Reserved"};
+	static const char * const serror_src[] = {
+		"GPCI", "APCI", "AGP HP", "AGP LP"
+	};
+	static const char * const serror_cmd[] = {
+		"DMA Read", "DMA RMW", "SGTE Read", "Reserved"
+	};
 #endif /* CONFIG_VERBOSE_MCHECK */
 
 #define TITAN__PCHIP_SERROR__LOST_UECC	(1UL << 0)
@@ -140,14 +144,15 @@ titan_parse_p_perror(int which, int port, u64 perror, int print)
 	int status = MCHK_DISPOSITION_REPORT;
 
 #ifdef CONFIG_VERBOSE_MCHECK
-	char *perror_cmd[] = { "Interrupt Acknowledge", "Special Cycle",
-			       "I/O Read",	       	"I/O Write",
-			       "Reserved",	       	"Reserved",
-			       "Memory Read",		"Memory Write",
-			       "Reserved",		"Reserved",
-			       "Configuration Read",	"Configuration Write",
-			       "Memory Read Multiple",	"Dual Address Cycle",
-			       "Memory Read Line","Memory Write and Invalidate"
+	static const char * const perror_cmd[] = {
+		"Interrupt Acknowledge", "Special Cycle",
+		"I/O Read",		"I/O Write",
+		"Reserved",		"Reserved",
+		"Memory Read",		"Memory Write",
+		"Reserved",		"Reserved",
+		"Configuration Read",	"Configuration Write",
+		"Memory Read Multiple",	"Dual Address Cycle",
+		"Memory Read Line",	"Memory Write and Invalidate"
 	};
 #endif /* CONFIG_VERBOSE_MCHECK */
 
@@ -273,11 +278,11 @@ titan_parse_p_agperror(int which, u64 agperror, int print)
 	int cmd, len;
 	unsigned long addr;
 
-	char *agperror_cmd[] = { "Read (low-priority)",	"Read (high-priority)",
-				 "Write (low-priority)",
-				 "Write (high-priority)",
-				 "Reserved",		"Reserved",
-				 "Flush",		"Fence"
+	static const char * const agperror_cmd[] = {
+		"Read (low-priority)",	"Read (high-priority)",
+		"Write (low-priority)",	"Write (high-priority)",
+		"Reserved",		"Reserved",
+		"Flush",		"Fence"
 	};
 #endif /* CONFIG_VERBOSE_MCHECK */
 

arch/alpha/kernel/osf_sys.c

@@ -15,7 +15,6 @@
 #include <linux/kernel.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/stddef.h>
 #include <linux/syscalls.h>
 #include <linux/unistd.h>
@@ -69,7 +68,6 @@ SYSCALL_DEFINE4(osf_set_program_attributes, unsigned long, text_start,
 {
 	struct mm_struct *mm;
 
-	lock_kernel();
 	mm = current->mm;
 	mm->end_code = bss_start + bss_len;
 	mm->start_brk = bss_start + bss_len;
@@ -78,7 +76,6 @@ SYSCALL_DEFINE4(osf_set_program_attributes, unsigned long, text_start,
 	printk("set_program_attributes(%lx %lx %lx %lx)\n",
 		text_start, text_len, bss_start, bss_len);
 #endif
-	unlock_kernel();
 	return 0;
 }
 
@@ -517,7 +514,6 @@ SYSCALL_DEFINE2(osf_proplist_syscall, enum pl_code, code,
 	long error;
 	int __user *min_buf_size_ptr;
 
-	lock_kernel();
 	switch (code) {
 	case PL_SET:
 		if (get_user(error, &args->set.nbytes))
@@ -547,7 +543,6 @@ SYSCALL_DEFINE2(osf_proplist_syscall, enum pl_code, code,
 		error = -EOPNOTSUPP;
 		break;
 	};
-	unlock_kernel();
 	return error;
 }
 
@@ -594,7 +589,7 @@ SYSCALL_DEFINE2(osf_sigstack, struct sigstack __user *, uss,
 
 SYSCALL_DEFINE3(osf_sysinfo, int, command, char __user *, buf, long, count)
 {
-	char *sysinfo_table[] = {
+	const char *sysinfo_table[] = {
 		utsname()->sysname,
 		utsname()->nodename,
 		utsname()->release,
@@ -606,7 +601,7 @@ SYSCALL_DEFINE3(osf_sysinfo, int, command, char __user *, buf, long, count)
 		"dummy",	/* secure RPC domain */
 	};
 	unsigned long offset;
-	char *res;
+	const char *res;
 	long len, err = -EINVAL;
 
 	offset = command-1;

arch/alpha/kernel/pci-sysfs.c

@@ -66,7 +66,7 @@ static int pci_mmap_resource(struct kobject *kobj,
 {
 	struct pci_dev *pdev = to_pci_dev(container_of(kobj,
 						       struct device, kobj));
-	struct resource *res = (struct resource *)attr->private;
+	struct resource *res = attr->private;
 	enum pci_mmap_state mmap_type;
 	struct pci_bus_region bar;
 	int i;

arch/alpha/kernel/perf_event.c

@@ -241,20 +241,20 @@ static inline unsigned long alpha_read_pmc(int idx)
 static int alpha_perf_event_set_period(struct perf_event *event,
 				struct hw_perf_event *hwc, int idx)
 {
-	long left = atomic64_read(&hwc->period_left);
+	long left = local64_read(&hwc->period_left);
 	long period = hwc->sample_period;
 	int ret = 0;
 
 	if (unlikely(left <= -period)) {
 		left = period;
-		atomic64_set(&hwc->period_left, left);
+		local64_set(&hwc->period_left, left);
 		hwc->last_period = period;
 		ret = 1;
 	}
 
 	if (unlikely(left <= 0)) {
 		left += period;
-		atomic64_set(&hwc->period_left, left);
+		local64_set(&hwc->period_left, left);
 		hwc->last_period = period;
 		ret = 1;
 	}
@@ -269,7 +269,7 @@ static int alpha_perf_event_set_period(struct perf_event *event,
 	if (left > (long)alpha_pmu->pmc_max_period[idx])
 		left = alpha_pmu->pmc_max_period[idx];
 
-	atomic64_set(&hwc->prev_count, (unsigned long)(-left));
+	local64_set(&hwc->prev_count, (unsigned long)(-left));
 
 	alpha_write_pmc(idx, (unsigned long)(-left));
 
@@ -300,10 +300,10 @@ static unsigned long alpha_perf_event_update(struct perf_event *event,
 	long delta;
 
 again:
-	prev_raw_count = atomic64_read(&hwc->prev_count);
+	prev_raw_count = local64_read(&hwc->prev_count);
 	new_raw_count = alpha_read_pmc(idx);
 
-	if (atomic64_cmpxchg(&hwc->prev_count, prev_raw_count,
+	if (local64_cmpxchg(&hwc->prev_count, prev_raw_count,
 			     new_raw_count) != prev_raw_count)
 		goto again;
 
@@ -316,8 +316,8 @@ again:
 		delta += alpha_pmu->pmc_max_period[idx] + 1;
 	}
 
-	atomic64_add(delta, &event->count);
-	atomic64_sub(delta, &hwc->period_left);
+	local64_add(delta, &event->count);
+	local64_sub(delta, &hwc->period_left);
 
 	return new_raw_count;
 }
@@ -636,7 +636,7 @@ static int __hw_perf_event_init(struct perf_event *event)
 	if (!hwc->sample_period) {
 		hwc->sample_period = alpha_pmu->pmc_max_period[0];
 		hwc->last_period = hwc->sample_period;
-		atomic64_set(&hwc->period_left, hwc->sample_period);
+		local64_set(&hwc->period_left, hwc->sample_period);
 	}
 
 	return 0;

arch/alpha/kernel/proto.h

@@ -156,9 +156,6 @@ extern void SMC669_Init(int);
 /* es1888.c */
 extern void es1888_init(void);
 
-/* ns87312.c */
-extern void ns87312_enable_ide(long ide_base);
-
 /* ../lib/fpreg.c */
 extern void alpha_write_fp_reg (unsigned long reg, unsigned long val);
 extern unsigned long alpha_read_fp_reg (unsigned long reg);

arch/alpha/kernel/signal.c

@@ -144,8 +144,7 @@ SYSCALL_DEFINE5(rt_sigaction, int, sig, const struct sigaction __user *, act,
 /*
  * Atomically swap in the new signal mask, and wait for a signal.
  */
-asmlinkage int
-do_sigsuspend(old_sigset_t mask, struct pt_regs *regs, struct switch_stack *sw)
+SYSCALL_DEFINE1(sigsuspend, old_sigset_t, mask)
 {
 	mask &= _BLOCKABLE;
 	spin_lock_irq(&current->sighand->siglock);
@@ -154,41 +153,6 @@ do_sigsuspend(old_sigset_t mask, struct pt_regs *regs, struct switch_stack *sw)
 	recalc_sigpending();
 	spin_unlock_irq(&current->sighand->siglock);
 
-	/* Indicate EINTR on return from any possible signal handler,
-	   which will not come back through here, but via sigreturn.  */
-	regs->r0 = EINTR;
-	regs->r19 = 1;
-
-	current->state = TASK_INTERRUPTIBLE;
-	schedule();
-	set_thread_flag(TIF_RESTORE_SIGMASK);
-	return -ERESTARTNOHAND;
-}
-
-asmlinkage int
-do_rt_sigsuspend(sigset_t __user *uset, size_t sigsetsize,
-		 struct pt_regs *regs, struct switch_stack *sw)
-{
-	sigset_t set;
-
-	/* XXX: Don't preclude handling different sized sigset_t's.  */
-	if (sigsetsize != sizeof(sigset_t))
-		return -EINVAL;
-	if (copy_from_user(&set, uset, sizeof(set)))
-		return -EFAULT;
-
-	sigdelsetmask(&set, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	current->saved_sigmask = current->blocked;
-	current->blocked = set;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
-
-	/* Indicate EINTR on return from any possible signal handler,
-	   which will not come back through here, but via sigreturn.  */
-	regs->r0 = EINTR;
-	regs->r19 = 1;
-
 	current->state = TASK_INTERRUPTIBLE;
 	schedule();
 	set_thread_flag(TIF_RESTORE_SIGMASK);
@@ -239,6 +203,8 @@ restore_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs,
 	unsigned long usp;
 	long i, err = __get_user(regs->pc, &sc->sc_pc);
 
+	current_thread_info()->restart_block.fn = do_no_restart_syscall;
+
 	sw->r26 = (unsigned long) ret_from_sys_call;
 
 	err |= __get_user(regs->r0, sc->sc_regs+0);
@@ -591,7 +557,6 @@ syscall_restart(unsigned long r0, unsigned long r19,
 		regs->pc -= 4;
 		break;
 	case ERESTART_RESTARTBLOCK:
-		current_thread_info()->restart_block.fn = do_no_restart_syscall;
 		regs->r0 = EINTR;
 		break;
 	}

arch/alpha/kernel/srm_env.c

@@ -87,7 +87,7 @@ static int srm_env_proc_show(struct seq_file *m, void *v)
 	srm_env_t	*entry;
 	char		*page;
 
-	entry = (srm_env_t *)m->private;
+	entry = m->private;
 	page = (char *)__get_free_page(GFP_USER);
 	if (!page)
 		return -ENOMEM;

arch/alpha/kernel/sys_cabriolet.c

@@ -33,7 +33,7 @@
 #include "irq_impl.h"
 #include "pci_impl.h"
 #include "machvec_impl.h"
-
+#include "pc873xx.h"
 
 /* Note mask bit is true for DISABLED irqs.  */
 static unsigned long cached_irq_mask = ~0UL;
@@ -235,18 +235,31 @@ cabriolet_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 	return COMMON_TABLE_LOOKUP;
 }
 
+static inline void __init
+cabriolet_enable_ide(void)
+{
+	if (pc873xx_probe() == -1) {
+		printk(KERN_ERR "Probing for PC873xx Super IO chip failed.\n");
+	 } else {
+		printk(KERN_INFO "Found %s Super IO chip at 0x%x\n",
+			pc873xx_get_model(), pc873xx_get_base());
+
+		pc873xx_enable_ide();
+	}
+}
+
 static inline void __init
 cabriolet_init_pci(void)
 {
 	common_init_pci();
-	ns87312_enable_ide(0x398);
+	cabriolet_enable_ide();
 }
 
 static inline void __init
 cia_cab_init_pci(void)
 {
 	cia_init_pci();
-	ns87312_enable_ide(0x398);
+	cabriolet_enable_ide();
 }
 
 /*

arch/alpha/kernel/sys_takara.c

@@ -29,7 +29,7 @@
 #include "irq_impl.h"
 #include "pci_impl.h"
 #include "machvec_impl.h"
-
+#include "pc873xx.h"
 
 /* Note mask bit is true for DISABLED irqs.  */
 static unsigned long cached_irq_mask[2] = { -1, -1 };
@@ -264,7 +264,14 @@ takara_init_pci(void)
 		alpha_mv.pci_map_irq = takara_map_irq_srm;
 
 	cia_init_pci();
-	ns87312_enable_ide(0x26e);
+
+	if (pc873xx_probe() == -1) {
+		printk(KERN_ERR "Probing for PC873xx Super IO chip failed.\n");
+	} else {
+		printk(KERN_INFO "Found %s Super IO chip at 0x%x\n",
+			pc873xx_get_model(), pc873xx_get_base());
+		pc873xx_enable_ide();
+	}
 }
 
 

arch/alpha/kernel/systbls.S

@@ -512,6 +512,9 @@ sys_call_table:
 	.quad sys_pwritev
 	.quad sys_rt_tgsigqueueinfo
 	.quad sys_perf_event_open
+	.quad sys_fanotify_init
+	.quad sys_fanotify_mark				/* 495 */
+	.quad sys_prlimit64
 
 	.size sys_call_table, . - sys_call_table
 	.type sys_call_table, @object

arch/alpha/kernel/time.c

@@ -191,16 +191,16 @@ irqreturn_t timer_interrupt(int irq, void *dev)
 
 	write_sequnlock(&xtime_lock);
 
-#ifndef CONFIG_SMP
-	while (nticks--)
-		update_process_times(user_mode(get_irq_regs()));
-#endif
-
 	if (test_perf_event_pending()) {
 		clear_perf_event_pending();
 		perf_event_do_pending();
 	}
 
+#ifndef CONFIG_SMP
+	while (nticks--)
+		update_process_times(user_mode(get_irq_regs()));
+#endif
+
 	return IRQ_HANDLED;
 }
 

arch/alpha/kernel/traps.c

@@ -13,7 +13,6 @@
 #include <linux/sched.h>
 #include <linux/tty.h>
 #include <linux/delay.h>
-#include <linux/smp_lock.h>
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/kallsyms.h>
@@ -623,7 +622,6 @@ do_entUna(void * va, unsigned long opcode, unsigned long reg,
 		return;
 	}
 
-	lock_kernel();
 	printk("Bad unaligned kernel access at %016lx: %p %lx %lu\n",
 		pc, va, opcode, reg);
 	do_exit(SIGSEGV);
@@ -646,7 +644,6 @@ got_exception:
 	 * Yikes!  No one to forward the exception to.
 	 * Since the registers are in a weird format, dump them ourselves.
  	 */
-	lock_kernel();
 
 	printk("%s(%d): unhandled unaligned exception\n",
 	       current->comm, task_pid_nr(current));

arch/arm/Kconfig

@@ -1576,96 +1576,6 @@ config AUTO_ZRELADDR
 	  0xf8000000. This assumes the zImage being placed in the first 128MB
 	  from start of memory.
 
-config ZRELADDR
-	hex "Physical address of the decompressed kernel image"
-	depends on !AUTO_ZRELADDR
-	default 0x00008000 if ARCH_BCMRING ||\
-		ARCH_CNS3XXX ||\
-		ARCH_DOVE ||\
-		ARCH_EBSA110 ||\
-		ARCH_FOOTBRIDGE ||\
-		ARCH_INTEGRATOR ||\
-		ARCH_IOP13XX ||\
-		ARCH_IOP33X ||\
-		ARCH_IXP2000 ||\
-		ARCH_IXP23XX ||\
-		ARCH_IXP4XX ||\
-		ARCH_KIRKWOOD ||\
-		ARCH_KS8695 ||\
-		ARCH_LOKI ||\
-		ARCH_MMP ||\
-		ARCH_MV78XX0 ||\
-		ARCH_NOMADIK ||\
-		ARCH_NUC93X ||\
-		ARCH_NS9XXX ||\
-		ARCH_ORION5X ||\
-		ARCH_SPEAR3XX ||\
-		ARCH_SPEAR6XX ||\
-		ARCH_U8500 ||\
-		ARCH_VERSATILE ||\
-		ARCH_W90X900
-	default 0x08008000 if ARCH_MX1 ||\
-		ARCH_SHARK
-	default 0x10008000 if ARCH_MSM ||\
-		ARCH_OMAP1 ||\
-		ARCH_RPC
-	default 0x20008000 if ARCH_S5P6440 ||\
-		ARCH_S5P6442 ||\
-		ARCH_S5PC100 ||\
-		ARCH_S5PV210
-	default 0x30008000 if ARCH_S3C2410 ||\
-		ARCH_S3C2400 ||\
-		ARCH_S3C2412 ||\
-		ARCH_S3C2416 ||\
-		ARCH_S3C2440 ||\
-		ARCH_S3C2443
-	default 0x40008000 if ARCH_STMP378X ||\
-		ARCH_STMP37XX ||\
-		ARCH_SH7372 ||\
-		ARCH_SH7377 ||\
-		ARCH_S5PV310
-	default 0x50008000 if ARCH_S3C64XX ||\
-		ARCH_SH7367
-	default 0x60008000 if ARCH_VEXPRESS
-	default 0x80008000 if ARCH_MX25 ||\
-		ARCH_MX3 ||\
-		ARCH_NETX ||\
-		ARCH_OMAP2PLUS ||\
-		ARCH_PNX4008
-	default 0x90008000 if ARCH_MX5 ||\
-		ARCH_MX91231
-	default 0xa0008000 if ARCH_IOP32X ||\
-		ARCH_PXA ||\
-		MACH_MX27
-	default 0xc0008000 if ARCH_LH7A40X ||\
-		MACH_MX21
-	default 0xf0008000 if ARCH_AAEC2000 ||\
-		ARCH_L7200
-	default 0xc0028000 if ARCH_CLPS711X
-	default 0x70008000 if ARCH_AT91 && (ARCH_AT91CAP9 || ARCH_AT91SAM9G45)
-	default 0x20008000 if ARCH_AT91 && !(ARCH_AT91CAP9 || ARCH_AT91SAM9G45)
-	default 0xc0008000 if ARCH_DAVINCI && ARCH_DAVINCI_DA8XX
-	default 0x80008000 if ARCH_DAVINCI && !ARCH_DAVINCI_DA8XX
-	default 0x00008000 if ARCH_EP93XX && EP93XX_SDCE3_SYNC_PHYS_OFFSET
-	default 0xc0008000 if ARCH_EP93XX && EP93XX_SDCE0_PHYS_OFFSET
-	default 0xd0008000 if ARCH_EP93XX && EP93XX_SDCE1_PHYS_OFFSET
-	default 0xe0008000 if ARCH_EP93XX && EP93XX_SDCE2_PHYS_OFFSET
-	default 0xf0008000 if ARCH_EP93XX && EP93XX_SDCE3_ASYNC_PHYS_OFFSET
-	default 0x00008000 if ARCH_GEMINI && GEMINI_MEM_SWAP
-	default 0x10008000 if ARCH_GEMINI && !GEMINI_MEM_SWAP
-	default 0x70008000 if ARCH_REALVIEW && REALVIEW_HIGH_PHYS_OFFSET
-	default 0x00008000 if ARCH_REALVIEW && !REALVIEW_HIGH_PHYS_OFFSET
-	default 0xc0208000 if ARCH_SA1100 && SA1111
-	default 0xc0008000 if ARCH_SA1100 && !SA1111
-	default 0x30108000 if ARCH_S3C2410 && PM_H1940
-	default 0x28E08000 if ARCH_U300 && MACH_U300_SINGLE_RAM
-	default 0x48008000 if ARCH_U300 && !MACH_U300_SINGLE_RAM
-	help
-	  ZRELADDR is the physical address where the decompressed kernel
-	  image will be placed. ZRELADDR has to be specified when the
-	  assumption of AUTO_ZRELADDR is not valid, or when ZBOOT_ROM is
-	  selected.
-
 endmenu
 
 menu "CPU Power Management"

arch/arm/boot/Makefile

@@ -14,16 +14,18 @@
 MKIMAGE         := $(srctree)/scripts/mkuboot.sh
 
 ifneq ($(MACHINE),)
--include $(srctree)/$(MACHINE)/Makefile.boot
+include $(srctree)/$(MACHINE)/Makefile.boot
 endif
 
 # Note: the following conditions must always be true:
+#   ZRELADDR == virt_to_phys(PAGE_OFFSET + TEXT_OFFSET)
 #   PARAMS_PHYS must be within 4MB of ZRELADDR
 #   INITRD_PHYS must be in RAM
+ZRELADDR    := $(zreladdr-y)
 PARAMS_PHYS := $(params_phys-y)
 INITRD_PHYS := $(initrd_phys-y)
 
-export INITRD_PHYS PARAMS_PHYS
+export ZRELADDR INITRD_PHYS PARAMS_PHYS
 
 targets := Image zImage xipImage bootpImage uImage
 
@@ -65,7 +67,7 @@ quiet_cmd_uimage = UIMAGE  $@
 ifeq ($(CONFIG_ZBOOT_ROM),y)
 $(obj)/uImage: LOADADDR=$(CONFIG_ZBOOT_ROM_TEXT)
 else
-$(obj)/uImage: LOADADDR=$(CONFIG_ZRELADDR)
+$(obj)/uImage: LOADADDR=$(ZRELADDR)
 endif
 
 ifeq ($(CONFIG_THUMB2_KERNEL),y)

arch/arm/boot/compressed/Makefile

@@ -79,6 +79,10 @@ endif
 EXTRA_CFLAGS  := -fpic -fno-builtin
 EXTRA_AFLAGS  := -Wa,-march=all
 
+# Supply ZRELADDR to the decompressor via a linker symbol.
+ifneq ($(CONFIG_AUTO_ZRELADDR),y)
+LDFLAGS_vmlinux := --defsym zreladdr=$(ZRELADDR)
+endif
 ifeq ($(CONFIG_CPU_ENDIAN_BE8),y)
 LDFLAGS_vmlinux += --be8
 endif

arch/arm/boot/compressed/head.S

@@ -177,7 +177,7 @@ not_angel:
 		and	r4, pc, #0xf8000000
 		add	r4, r4, #TEXT_OFFSET
 #else
-		ldr	r4, =CONFIG_ZRELADDR
+		ldr	r4, =zreladdr
 #endif
 		subs	r0, r0, r1		@ calculate the delta offset
 

arch/arm/common/it8152.c

@@ -263,6 +263,22 @@ static int it8152_pci_platform_notify_remove(struct device *dev)
 	return 0;
 }
 
+int dma_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size)
+{
+	dev_dbg(dev, "%s: dma_addr %08x, size %08x\n",
+		__func__, dma_addr, size);
+	return (dev->bus == &pci_bus_type) &&
+		((dma_addr + size - PHYS_OFFSET) >= SZ_64M);
+}
+
+int dma_set_coherent_mask(struct device *dev, u64 mask)
+{
+	if (mask >= PHYS_OFFSET + SZ_64M - 1)
+		return 0;
+
+	return -EIO;
+}
+
 int __init it8152_pci_setup(int nr, struct pci_sys_data *sys)
 {
 	it8152_io.start = IT8152_IO_BASE + 0x12000;

arch/arm/include/asm/dma-mapping.h

@@ -288,15 +288,7 @@ extern void dmabounce_unregister_dev(struct device *);
  * DMA access and 1 if the buffer needs to be bounced.
  *
  */
-#ifdef CONFIG_SA1111
 extern int dma_needs_bounce(struct device*, dma_addr_t, size_t);
-#else
-static inline int dma_needs_bounce(struct device *dev, dma_addr_t addr,
-				   size_t size)
-{
-	return 0;
-}
-#endif
 
 /*
  * The DMA API, implemented by dmabounce.c.  See below for descriptions.

arch/arm/include/asm/perf_event.h

@@ -17,7 +17,7 @@
  * counter interrupts are regular interrupts and not an NMI. This
  * means that when we receive the interrupt we can call
  * perf_event_do_pending() that handles all of the work with
- * interrupts enabled.
+ * interrupts disabled.
  */
 static inline void
 set_perf_event_pending(void)

arch/arm/include/asm/unistd.h

@@ -393,6 +393,9 @@
 #define __NR_perf_event_open		(__NR_SYSCALL_BASE+364)
 #define __NR_recvmmsg			(__NR_SYSCALL_BASE+365)
 #define __NR_accept4			(__NR_SYSCALL_BASE+366)
+#define __NR_fanotify_init		(__NR_SYSCALL_BASE+367)
+#define __NR_fanotify_mark		(__NR_SYSCALL_BASE+368)
+#define __NR_prlimit64			(__NR_SYSCALL_BASE+369)
 
 /*
  * The following SWIs are ARM private.

arch/arm/kernel/calls.S

@@ -376,6 +376,9 @@
 		CALL(sys_perf_event_open)
 /* 365 */	CALL(sys_recvmmsg)
 		CALL(sys_accept4)
+		CALL(sys_fanotify_init)
+		CALL(sys_fanotify_mark)
+		CALL(sys_prlimit64)
 #ifndef syscalls_counted
 .equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls
 #define syscalls_counted

arch/arm/kernel/entry-common.S

@@ -418,11 +418,13 @@ ENDPROC(sys_clone_wrapper)
 
 sys_sigreturn_wrapper:
 		add	r0, sp, #S_OFF
+		mov	why, #0		@ prevent syscall restart handling
 		b	sys_sigreturn
 ENDPROC(sys_sigreturn_wrapper)
 
 sys_rt_sigreturn_wrapper:
 		add	r0, sp, #S_OFF
+		mov	why, #0		@ prevent syscall restart handling
 		b	sys_rt_sigreturn
 ENDPROC(sys_rt_sigreturn_wrapper)
 

arch/arm/kernel/perf_event.c

@@ -319,8 +319,8 @@ validate_event(struct cpu_hw_events *cpuc,
 {
 	struct hw_perf_event fake_event = event->hw;
 
-	if (event->pmu && event->pmu != &pmu)
-		return 0;
+	if (event->pmu != &pmu || event->state <= PERF_EVENT_STATE_OFF)
+		return 1;
 
 	return armpmu->get_event_idx(cpuc, &fake_event) >= 0;
 }
@@ -1041,8 +1041,8 @@ armv6pmu_handle_irq(int irq_num,
 	/*
 	 * Handle the pending perf events.
 	 *
-	 * Note: this call *must* be run with interrupts enabled. For
-	 * platforms that can have the PMU interrupts raised as a PMI, this
+	 * Note: this call *must* be run with interrupts disabled. For
+	 * platforms that can have the PMU interrupts raised as an NMI, this
 	 * will not work.
 	 */
 	perf_event_do_pending();
@@ -2017,8 +2017,8 @@ static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev)
 	/*
 	 * Handle the pending perf events.
 	 *
-	 * Note: this call *must* be run with interrupts enabled. For
-	 * platforms that can have the PMU interrupts raised as a PMI, this
+	 * Note: this call *must* be run with interrupts disabled. For
+	 * platforms that can have the PMU interrupts raised as an NMI, this
 	 * will not work.
 	 */
 	perf_event_do_pending();

arch/arm/mach-at91/at91sam9g45.c

@@ -121,8 +121,8 @@ static struct clk ssc1_clk = {
 	.pmc_mask	= 1 << AT91SAM9G45_ID_SSC1,
 	.type		= CLK_TYPE_PERIPHERAL,
 };
-static struct clk tcb_clk = {
-	.name		= "tcb_clk",
+static struct clk tcb0_clk = {
+	.name		= "tcb0_clk",
 	.pmc_mask	= 1 << AT91SAM9G45_ID_TCB,
 	.type		= CLK_TYPE_PERIPHERAL,
 };
@@ -192,6 +192,14 @@ static struct clk ohci_clk = {
 	.parent		= &uhphs_clk,
 };
 
+/* One additional fake clock for second TC block */
+static struct clk tcb1_clk = {
+	.name		= "tcb1_clk",
+	.pmc_mask	= 0,
+	.type		= CLK_TYPE_PERIPHERAL,
+	.parent		= &tcb0_clk,
+};
+
 static struct clk *periph_clocks[] __initdata = {
 	&pioA_clk,
 	&pioB_clk,
@@ -208,7 +216,7 @@ static struct clk *periph_clocks[] __initdata = {
 	&spi1_clk,
 	&ssc0_clk,
 	&ssc1_clk,
-	&tcb_clk,
+	&tcb0_clk,
 	&pwm_clk,
 	&tsc_clk,
 	&dma_clk,
@@ -221,6 +229,7 @@ static struct clk *periph_clocks[] __initdata = {
 	&mmc1_clk,
 	// irq0
 	&ohci_clk,
+	&tcb1_clk,
 };
 
 /*

arch/arm/mach-at91/at91sam9g45_devices.c

@@ -46,7 +46,7 @@ static struct resource hdmac_resources[] = {
 		.end	= AT91_BASE_SYS + AT91_DMA + SZ_512 - 1,
 		.flags	= IORESOURCE_MEM,
 	},
-	[2] = {
+	[1] = {
 		.start	= AT91SAM9G45_ID_DMA,
 		.end	= AT91SAM9G45_ID_DMA,
 		.flags	= IORESOURCE_IRQ,
@@ -835,9 +835,9 @@ static struct platform_device at91sam9g45_tcb1_device = {
 static void __init at91_add_device_tc(void)
 {
 	/* this chip has one clock and irq for all six TC channels */
-	at91_clock_associate("tcb_clk", &at91sam9g45_tcb0_device.dev, "t0_clk");
+	at91_clock_associate("tcb0_clk", &at91sam9g45_tcb0_device.dev, "t0_clk");
 	platform_device_register(&at91sam9g45_tcb0_device);
-	at91_clock_associate("tcb_clk", &at91sam9g45_tcb1_device.dev, "t0_clk");
+	at91_clock_associate("tcb1_clk", &at91sam9g45_tcb1_device.dev, "t0_clk");
 	platform_device_register(&at91sam9g45_tcb1_device);
 }
 #else

arch/arm/mach-at91/board-sam9261ek.c

@@ -93,11 +93,12 @@ static struct resource dm9000_resource[] = {
 		.start	= AT91_PIN_PC11,
 		.end	= AT91_PIN_PC11,
 		.flags	= IORESOURCE_IRQ
+			| IORESOURCE_IRQ_LOWEDGE | IORESOURCE_IRQ_HIGHEDGE,
 	}
 };
 
 static struct dm9000_plat_data dm9000_platdata = {
-	.flags		= DM9000_PLATF_16BITONLY,
+	.flags		= DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM,
 };
 
 static struct platform_device dm9000_device = {
@@ -167,17 +168,6 @@ static struct at91_udc_data __initdata ek_udc_data = {
 };
 
 
-/*
- * MCI (SD/MMC)
- */
-static struct at91_mmc_data __initdata ek_mmc_data = {
-	.wire4		= 1,
-//	.det_pin	= ... not connected
-//	.wp_pin		= ... not connected
-//	.vcc_pin	= ... not connected
-};
-
-
 /*
  * NAND flash
  */
@@ -246,6 +236,10 @@ static void __init ek_add_device_nand(void)
 	at91_add_device_nand(&ek_nand_data);
 }
 
+/*
+ * SPI related devices
+ */
+#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
 
 /*
  * ADS7846 Touchscreen
@@ -356,6 +350,19 @@ static struct spi_board_info ek_spi_devices[] = {
 #endif
 };
 
+#else /* CONFIG_SPI_ATMEL_* */
+/* spi0 and mmc/sd share the same PIO pins: cannot be used at the same time */
+
+/*
+ * MCI (SD/MMC)
+ * det_pin, wp_pin and vcc_pin are not connected
+ */
+static struct at91_mmc_data __initdata ek_mmc_data = {
+	.wire4		= 1,
+};
+
+#endif /* CONFIG_SPI_ATMEL_* */
+
 
 /*
  * LCD Controller

arch/arm/mach-at91/clock.c

@@ -501,7 +501,8 @@ postcore_initcall(at91_clk_debugfs_init);
 int __init clk_register(struct clk *clk)
 {
 	if (clk_is_peripheral(clk)) {
-		clk->parent = &mck;
+		if (!clk->parent)
+			clk->parent = &mck;
 		clk->mode = pmc_periph_mode;
 		list_add_tail(&clk->node, &clocks);
 	}

arch/arm/mach-ep93xx/clock.c

@@ -560,4 +560,4 @@ static int __init ep93xx_clock_init(void)
 	clkdev_add_table(clocks, ARRAY_SIZE(clocks));
 	return 0;
 }
-arch_initcall(ep93xx_clock_init);
+postcore_initcall(ep93xx_clock_init);

arch/arm/mach-ixp4xx/common-pci.c

@@ -503,6 +503,14 @@ struct pci_bus * __devinit ixp4xx_scan_bus(int nr, struct pci_sys_data *sys)
 	return pci_scan_bus(sys->busnr, &ixp4xx_ops, sys);
 }
 
+int dma_set_coherent_mask(struct device *dev, u64 mask)
+{
+	if (mask >= SZ_64M - 1)
+		return 0;
+
+	return -EIO;
+}
+
 EXPORT_SYMBOL(ixp4xx_pci_read);
 EXPORT_SYMBOL(ixp4xx_pci_write);
 

arch/arm/mach-ixp4xx/include/mach/hardware.h

@@ -26,6 +26,8 @@
 #define PCIBIOS_MAX_MEM		0x4BFFFFFF
 #endif
 
+#define ARCH_HAS_DMA_SET_COHERENT_MASK
+
 #define pcibios_assign_all_busses()	1
 
 /* Register locations and bits */

arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c

@@ -215,7 +215,7 @@ struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata = {
  * Add platform devices present on this baseboard and init
  * them from CPU side as far as required to use them later on
  */
-void __init eukrea_mbimxsd_baseboard_init(void)
+void __init eukrea_mbimxsd25_baseboard_init(void)
 {
 	if (mxc_iomux_v3_setup_multiple_pads(eukrea_mbimxsd_pads,
 			ARRAY_SIZE(eukrea_mbimxsd_pads)))

arch/arm/mach-mx25/mach-cpuimx25.c

@@ -147,8 +147,8 @@ static void __init eukrea_cpuimx25_init(void)
 	if (!otg_mode_host)
 		mxc_register_device(&otg_udc_device, &otg_device_pdata);
 
-#ifdef CONFIG_MACH_EUKREA_MBIMXSD_BASEBOARD
-	eukrea_mbimxsd_baseboard_init();
+#ifdef CONFIG_MACH_EUKREA_MBIMXSD25_BASEBOARD
+	eukrea_mbimxsd25_baseboard_init();
 #endif
 }
 

arch/arm/mach-mx3/clock-imx35.c

@@ -155,7 +155,7 @@ static unsigned long get_rate_arm(void)
 
 	aad = &clk_consumer[(pdr0 >> 16) & 0xf];
 	if (aad->sel)
-		fref = fref * 2 / 3;
+		fref = fref * 3 / 4;
 
 	return fref / aad->arm;
 }
@@ -164,7 +164,7 @@ static unsigned long get_rate_ahb(struct clk *clk)
 {
 	unsigned long pdr0 = __raw_readl(CCM_BASE + CCM_PDR0);
 	struct arm_ahb_div *aad;
-	unsigned long fref = get_rate_mpll();
+	unsigned long fref = get_rate_arm();
 
 	aad = &clk_consumer[(pdr0 >> 16) & 0xf];
 
@@ -176,16 +176,11 @@ static unsigned long get_rate_ipg(struct clk *clk)
 	return get_rate_ahb(NULL) >> 1;
 }
 
-static unsigned long get_3_3_div(unsigned long in)
-{
-	return (((in >> 3) & 0x7) + 1) * ((in & 0x7) + 1);
-}
-
 static unsigned long get_rate_uart(struct clk *clk)
 {
 	unsigned long pdr3 = __raw_readl(CCM_BASE + CCM_PDR3);
 	unsigned long pdr4 = __raw_readl(CCM_BASE + CCM_PDR4);
-	unsigned long div = get_3_3_div(pdr4 >> 10);
+	unsigned long div = ((pdr4 >> 10) & 0x3f) + 1;
 
 	if (pdr3 & (1 << 14))
 		return get_rate_arm() / div;
@@ -216,7 +211,7 @@ static unsigned long get_rate_sdhc(struct clk *clk)
 		break;
 	}
 
-	return rate / get_3_3_div(div);
+	return rate / (div + 1);
 }
 
 static unsigned long get_rate_mshc(struct clk *clk)
@@ -270,7 +265,7 @@ static unsigned long get_rate_csi(struct clk *clk)
 	else
 		rate = get_rate_ppll();
 
-	return rate / get_3_3_div((pdr2 >> 16) & 0x3f);
+	return rate / (((pdr2 >> 16) & 0x3f) + 1);
 }
 
 static unsigned long get_rate_otg(struct clk *clk)
@@ -283,25 +278,51 @@ static unsigned long get_rate_otg(struct clk *clk)
 	else
 		rate = get_rate_ppll();
 
-	return rate / get_3_3_div((pdr4 >> 22) & 0x3f);
+	return rate / (((pdr4 >> 22) & 0x3f) + 1);
 }
 
 static unsigned long get_rate_ipg_per(struct clk *clk)
 {
 	unsigned long pdr0 = __raw_readl(CCM_BASE + CCM_PDR0);
 	unsigned long pdr4 = __raw_readl(CCM_BASE + CCM_PDR4);
-	unsigned long div1, div2;
+	unsigned long div;
 
 	if (pdr0 & (1 << 26)) {
-		div1 = (pdr4 >> 19) & 0x7;
-		div2 = (pdr4 >> 16) & 0x7;
-		return get_rate_arm() / ((div1 + 1) * (div2 + 1));
+		div = (pdr4 >> 16) & 0x3f;
+		return get_rate_arm() / (div + 1);
 	} else {
-		div1 = (pdr0 >> 12) & 0x7;
-		return get_rate_ahb(NULL) / div1;
+		div = (pdr0 >> 12) & 0x7;
+		return get_rate_ahb(NULL) / (div + 1);
 	}
 }
 
+static unsigned long get_rate_hsp(struct clk *clk)
+{
+	unsigned long hsp_podf = (__raw_readl(CCM_BASE + CCM_PDR0) >> 20) & 0x03;
+	unsigned long fref = get_rate_mpll();
+
+	if (fref > 400 * 1000 * 1000) {
+		switch (hsp_podf) {
+		case 0:
+			return fref >> 2;
+		case 1:
+			return fref >> 3;
+		case 2:
+			return fref / 3;
+		}
+	} else {
+		switch (hsp_podf) {
+		case 0:
+		case 2:
+			return fref / 3;
+		case 1:
+			return fref / 6;
+		}
+	}
+
+	return 0;
+}
+
 static int clk_cgr_enable(struct clk *clk)
 {
 	u32 reg;
@@ -359,7 +380,7 @@ DEFINE_CLOCK(i2c1_clk,   0, CCM_CGR1, 10, get_rate_ipg_per, NULL);
 DEFINE_CLOCK(i2c2_clk,   1, CCM_CGR1, 12, get_rate_ipg_per, NULL);
 DEFINE_CLOCK(i2c3_clk,   2, CCM_CGR1, 14, get_rate_ipg_per, NULL);
 DEFINE_CLOCK(iomuxc_clk, 0, CCM_CGR1, 16, NULL, NULL);
-DEFINE_CLOCK(ipu_clk,    0, CCM_CGR1, 18, get_rate_ahb, NULL);
+DEFINE_CLOCK(ipu_clk,    0, CCM_CGR1, 18, get_rate_hsp, NULL);
 DEFINE_CLOCK(kpp_clk,    0, CCM_CGR1, 20, get_rate_ipg, NULL);
 DEFINE_CLOCK(mlb_clk,    0, CCM_CGR1, 22, get_rate_ahb, NULL);
 DEFINE_CLOCK(mshc_clk,   0, CCM_CGR1, 24, get_rate_mshc, NULL);
@@ -485,10 +506,10 @@ static struct clk_lookup lookups[] = {
 
 int __init mx35_clocks_init()
 {
-	unsigned int ll = 0;
+	unsigned int cgr2 = 3 << 26, cgr3 = 0;
 
 #if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_ICEDCC)
-	ll = (3 << 16);
+	cgr2 |= 3 << 16;
 #endif
 
 	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
@@ -499,8 +520,20 @@ int __init mx35_clocks_init()
 	__raw_writel((3 << 18), CCM_BASE + CCM_CGR0);
 	__raw_writel((3 << 2) | (3 << 4) | (3 << 6) | (3 << 8) | (3 << 16),
 			CCM_BASE + CCM_CGR1);
-	__raw_writel((3 << 26) | ll, CCM_BASE + CCM_CGR2);
-	__raw_writel(0, CCM_BASE + CCM_CGR3);
+
+	/*
+	 * Check if we came up in internal boot mode. If yes, we need some
+	 * extra clocks turned on, otherwise the MX35 boot ROM code will
+	 * hang after a watchdog reset.
+	 */
+	if (!(__raw_readl(CCM_BASE + CCM_RCSR) & (3 << 10))) {
+		/* Additionally turn on UART1, SCC, and IIM clocks */
+		cgr2 |= 3 << 16 | 3 << 4;
+		cgr3 |= 3 << 2;
+	}
+
+	__raw_writel(cgr2, CCM_BASE + CCM_CGR2);
+	__raw_writel(cgr3, CCM_BASE + CCM_CGR3);
 
 	mxc_timer_init(&gpt_clk,
 			MX35_IO_ADDRESS(MX35_GPT1_BASE_ADDR), MX35_INT_GPT);

arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c

@@ -216,7 +216,7 @@ struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata = {
  * Add platform devices present on this baseboard and init
  * them from CPU side as far as required to use them later on
  */
-void __init eukrea_mbimxsd_baseboard_init(void)
+void __init eukrea_mbimxsd35_baseboard_init(void)
 {
 	if (mxc_iomux_v3_setup_multiple_pads(eukrea_mbimxsd_pads,
 			ARRAY_SIZE(eukrea_mbimxsd_pads)))

arch/arm/mach-mx3/mach-cpuimx35.c

@@ -201,8 +201,8 @@ static void __init mxc_board_init(void)
 	if (!otg_mode_host)
 		mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata);
 
-#ifdef CONFIG_MACH_EUKREA_MBIMXSD_BASEBOARD
-	eukrea_mbimxsd_baseboard_init();
+#ifdef CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD
+	eukrea_mbimxsd35_baseboard_init();
 #endif
 }
 

arch/arm/mach-mx5/clock-mx51.c

@@ -56,7 +56,7 @@ static void _clk_ccgr_disable(struct clk *clk)
 {
 	u32 reg;
 	reg = __raw_readl(clk->enable_reg);
-	reg &= ~(MXC_CCM_CCGRx_MOD_OFF << clk->enable_shift);
+	reg &= ~(MXC_CCM_CCGRx_CG_MASK << clk->enable_shift);
 	__raw_writel(reg, clk->enable_reg);
 
 }

arch/arm/mach-pxa/cpufreq-pxa2xx.c

@@ -398,7 +398,7 @@ static int pxa_set_target(struct cpufreq_policy *policy,
 	return 0;
 }
 
-static __init int pxa_cpufreq_init(struct cpufreq_policy *policy)
+static int pxa_cpufreq_init(struct cpufreq_policy *policy)
 {
 	int i;
 	unsigned int freq;

arch/arm/mach-pxa/cpufreq-pxa3xx.c

@@ -204,7 +204,7 @@ static int pxa3xx_cpufreq_set(struct cpufreq_policy *policy,
 	return 0;
 }
 
-static __init int pxa3xx_cpufreq_init(struct cpufreq_policy *policy)
+static int pxa3xx_cpufreq_init(struct cpufreq_policy *policy)
 {
 	int ret = -EINVAL;
 

arch/arm/mach-pxa/include/mach/hardware.h

@@ -309,7 +309,7 @@ extern unsigned long get_clock_tick_rate(void);
 #define PCIBIOS_MIN_IO		0
 #define PCIBIOS_MIN_MEM		0
 #define pcibios_assign_all_busses()	1
+#define ARCH_HAS_DMA_SET_COHERENT_MASK
 #endif
 
-
 #endif  /* _ASM_ARCH_HARDWARE_H */

arch/arm/mach-pxa/include/mach/io.h

@@ -6,6 +6,8 @@
 #ifndef __ASM_ARM_ARCH_IO_H
 #define __ASM_ARM_ARCH_IO_H
 
+#include <mach/hardware.h>
+
 #define IO_SPACE_LIMIT 0xffffffff
 
 /*

arch/arm/mach-pxa/include/mach/mfp-pxa300.h

@@ -71,10 +71,10 @@
 #define GPIO46_CI_DD_7		MFP_CFG_DRV(GPIO46, AF0, DS04X)
 #define GPIO47_CI_DD_8		MFP_CFG_DRV(GPIO47, AF1, DS04X)
 #define GPIO48_CI_DD_9		MFP_CFG_DRV(GPIO48, AF1, DS04X)
-#define GPIO52_CI_HSYNC		MFP_CFG_DRV(GPIO52, AF0, DS04X)
-#define GPIO51_CI_VSYNC		MFP_CFG_DRV(GPIO51, AF0, DS04X)
 #define GPIO49_CI_MCLK		MFP_CFG_DRV(GPIO49, AF0, DS04X)
 #define GPIO50_CI_PCLK		MFP_CFG_DRV(GPIO50, AF0, DS04X)
+#define GPIO51_CI_HSYNC		MFP_CFG_DRV(GPIO51, AF0, DS04X)
+#define GPIO52_CI_VSYNC		MFP_CFG_DRV(GPIO52, AF0, DS04X)
 
 /* KEYPAD */
 #define GPIO3_KP_DKIN_6		MFP_CFG_LPM(GPIO3,   AF2, FLOAT)

arch/arm/mach-s3c64xx/dev-spi.c

@@ -18,10 +18,11 @@
 #include <mach/map.h>
 #include <mach/gpio-bank-c.h>
 #include <mach/spi-clocks.h>
+#include <mach/irqs.h>
 
 #include <plat/s3c64xx-spi.h>
 #include <plat/gpio-cfg.h>
-#include <plat/irqs.h>
+#include <plat/devs.h>
 
 static char *spi_src_clks[] = {
 	[S3C64XX_SPI_SRCCLK_PCLK] = "pclk",

arch/arm/mach-s3c64xx/mach-real6410.c

@@ -30,73 +30,73 @@
 #include <plat/devs.h>
 #include <plat/regs-serial.h>
 
-#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+#define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK)
+#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
+#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
 
 static struct s3c2410_uartcfg real6410_uartcfgs[] __initdata = {
 	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
+		.hwport	= 0,
+		.flags	= 0,
+		.ucon	= UCON,
+		.ulcon	= ULCON,
+		.ufcon	= UFCON,
 	},
 	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
+		.hwport	= 1,
+		.flags	= 0,
+		.ucon	= UCON,
+		.ulcon	= ULCON,
+		.ufcon	= UFCON,
 	},
 	[2] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
+		.hwport	= 2,
+		.flags	= 0,
+		.ucon	= UCON,
+		.ulcon	= ULCON,
+		.ufcon	= UFCON,
 	},
 	[3] = {
-		.hwport	     = 3,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
+		.hwport	= 3,
+		.flags	= 0,
+		.ucon	= UCON,
+		.ulcon	= ULCON,
+		.ufcon	= UFCON,
 	},
 };
 
 /* DM9000AEP 10/100 ethernet controller */
 
 static struct resource real6410_dm9k_resource[] = {
-        [0] = {
-                .start = S3C64XX_PA_XM0CSN1,
-                .end   = S3C64XX_PA_XM0CSN1 + 1,
-                .flags = IORESOURCE_MEM
-        },
-        [1] = {
-                .start = S3C64XX_PA_XM0CSN1 + 4,
-                .end   = S3C64XX_PA_XM0CSN1 + 5,
-                .flags = IORESOURCE_MEM
-        },
-        [2] = {
-                .start = S3C_EINT(7),
-                .end   = S3C_EINT(7),
-                .flags = IORESOURCE_IRQ,
-        }
+	[0] = {
+		.start	= S3C64XX_PA_XM0CSN1,
+		.end	= S3C64XX_PA_XM0CSN1 + 1,
+		.flags	= IORESOURCE_MEM
+	},
+	[1] = {
+		.start	= S3C64XX_PA_XM0CSN1 + 4,
+		.end	= S3C64XX_PA_XM0CSN1 + 5,
+		.flags	= IORESOURCE_MEM
+	},
+	[2] = {
+		.start	= S3C_EINT(7),
+		.end	= S3C_EINT(7),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL
+	}
 };
 
 static struct dm9000_plat_data real6410_dm9k_pdata = {
-        .flags          = (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
+	.flags		= (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
 };
 
 static struct platform_device real6410_device_eth = {
-        .name           = "dm9000",
-        .id             = -1,
-        .num_resources  = ARRAY_SIZE(real6410_dm9k_resource),
-        .resource       = real6410_dm9k_resource,
-        .dev            = {
-                .platform_data  = &real6410_dm9k_pdata,
-        },
+	.name		= "dm9000",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(real6410_dm9k_resource),
+	.resource	= real6410_dm9k_resource,
+	.dev		= {
+		.platform_data	= &real6410_dm9k_pdata,
+	},
 };
 
 static struct platform_device *real6410_devices[] __initdata = {
@@ -129,12 +129,12 @@ static void __init real6410_machine_init(void)
 	/* set timing for nCS1 suitable for ethernet chip */
 
 	__raw_writel((0 << S3C64XX_SROM_BCX__PMC__SHIFT) |
-			(6 << S3C64XX_SROM_BCX__TACP__SHIFT) |
-			(4 << S3C64XX_SROM_BCX__TCAH__SHIFT) |
-			(1 << S3C64XX_SROM_BCX__TCOH__SHIFT) |
-			(13 << S3C64XX_SROM_BCX__TACC__SHIFT) |
-			(4 << S3C64XX_SROM_BCX__TCOS__SHIFT) |
-			(0 << S3C64XX_SROM_BCX__TACS__SHIFT), S3C64XX_SROM_BC1);
+		(6 << S3C64XX_SROM_BCX__TACP__SHIFT) |
+		(4 << S3C64XX_SROM_BCX__TCAH__SHIFT) |
+		(1 << S3C64XX_SROM_BCX__TCOH__SHIFT) |
+		(13 << S3C64XX_SROM_BCX__TACC__SHIFT) |
+		(4 << S3C64XX_SROM_BCX__TCOS__SHIFT) |
+		(0 << S3C64XX_SROM_BCX__TACS__SHIFT), S3C64XX_SROM_BC1);
 
 	platform_add_devices(real6410_devices, ARRAY_SIZE(real6410_devices));
 }

arch/arm/mach-s5pv210/clock.c

@@ -280,6 +280,24 @@ static struct clk init_clocks_disable[] = {
 		.parent		= &clk_hclk_dsys.clk,
 		.enable		= s5pv210_clk_ip0_ctrl,
 		.ctrlbit	= (1<<29),
+	}, {
+		.name		= "fimc",
+		.id		= 0,
+		.parent		= &clk_hclk_dsys.clk,
+		.enable		= s5pv210_clk_ip0_ctrl,
+		.ctrlbit	= (1 << 24),
+	}, {
+		.name		= "fimc",
+		.id		= 1,
+		.parent		= &clk_hclk_dsys.clk,
+		.enable		= s5pv210_clk_ip0_ctrl,
+		.ctrlbit	= (1 << 25),
+	}, {
+		.name		= "fimc",
+		.id		= 2,
+		.parent		= &clk_hclk_dsys.clk,
+		.enable		= s5pv210_clk_ip0_ctrl,
+		.ctrlbit	= (1 << 26),
 	}, {
 		.name		= "otg",
 		.id		= -1,
@@ -357,7 +375,7 @@ static struct clk init_clocks_disable[] = {
 		.id		= 1,
 		.parent		= &clk_pclk_psys.clk,
 		.enable		= s5pv210_clk_ip3_ctrl,
-		.ctrlbit	= (1<<8),
+		.ctrlbit	= (1 << 10),
 	}, {
 		.name		= "i2c",
 		.id		= 2,

arch/arm/mach-s5pv210/cpu.c

@@ -47,7 +47,7 @@ static struct map_desc s5pv210_iodesc[] __initdata = {
 	{
 		.virtual	= (unsigned long)S5P_VA_SYSTIMER,
 		.pfn		= __phys_to_pfn(S5PV210_PA_SYSTIMER),
-		.length		= SZ_1M,
+		.length		= SZ_4K,
 		.type		= MT_DEVICE,
 	}, {
 		.virtual	= (unsigned long)VA_VIC2,

arch/arm/mach-shmobile/Makefile

@@ -3,7 +3,7 @@
 #
 
 # Common objects
-obj-y				:= timer.o console.o clock.o
+obj-y				:= timer.o console.o clock.o pm_runtime.o
 
 # CPU objects
 obj-$(CONFIG_ARCH_SH7367)	+= setup-sh7367.o clock-sh7367.o intc-sh7367.o

arch/arm/mach-shmobile/board-ap4evb.c

@@ -25,6 +25,7 @@
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/mfd/sh_mobile_sdhi.h>
+#include <linux/mfd/tmio.h>
 #include <linux/mmc/host.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
@@ -39,6 +40,7 @@
 #include <linux/sh_clk.h>
 #include <linux/gpio.h>
 #include <linux/input.h>
+#include <linux/leds.h>
 #include <linux/input/sh_keysc.h>
 #include <linux/usb/r8a66597.h>
 
@@ -307,6 +309,7 @@ static struct sh_mobile_sdhi_info sdhi1_info = {
 	.dma_slave_tx	= SHDMA_SLAVE_SDHI1_TX,
 	.dma_slave_rx	= SHDMA_SLAVE_SDHI1_RX,
 	.tmio_ocr_mask	= MMC_VDD_165_195,
+	.tmio_flags	= TMIO_MMC_WRPROTECT_DISABLE,
 };
 
 static struct resource sdhi1_resources[] = {
@@ -558,7 +561,7 @@ static struct resource fsi_resources[] = {
 
 static struct platform_device fsi_device = {
 	.name		= "sh_fsi2",
-	.id		= 0,
+	.id		= -1,
 	.num_resources	= ARRAY_SIZE(fsi_resources),
 	.resource	= fsi_resources,
 	.dev	= {
@@ -650,7 +653,44 @@ static struct platform_device hdmi_device = {
 	},
 };
 
+static struct gpio_led ap4evb_leds[] = {
+	{
+		.name			= "led4",
+		.gpio			= GPIO_PORT185,
+		.default_state	= LEDS_GPIO_DEFSTATE_ON,
+	},
+	{
+		.name			= "led2",
+		.gpio			= GPIO_PORT186,
+		.default_state	= LEDS_GPIO_DEFSTATE_ON,
+	},
+	{
+		.name			= "led3",
+		.gpio			= GPIO_PORT187,
+		.default_state	= LEDS_GPIO_DEFSTATE_ON,
+	},
+	{
+		.name			= "led1",
+		.gpio			= GPIO_PORT188,
+		.default_state	= LEDS_GPIO_DEFSTATE_ON,
+	}
+};
+
+static struct gpio_led_platform_data ap4evb_leds_pdata = {
+	.num_leds = ARRAY_SIZE(ap4evb_leds),
+	.leds = ap4evb_leds,
+};
+
+static struct platform_device leds_device = {
+	.name = "leds-gpio",
+	.id = 0,
+	.dev = {
+		.platform_data  = &ap4evb_leds_pdata,
+	},
+};
+
 static struct platform_device *ap4evb_devices[] __initdata = {
+	&leds_device,
 	&nor_flash_device,
 	&smc911x_device,
 	&sdhi0_device,
@@ -840,20 +880,6 @@ static void __init ap4evb_init(void)
 	gpio_request(GPIO_FN_CS5A,	NULL);
 	gpio_request(GPIO_FN_IRQ6_39,	NULL);
 
-	/* enable LED 1 - 4 */
-	gpio_request(GPIO_PORT185, NULL);
-	gpio_request(GPIO_PORT186, NULL);
-	gpio_request(GPIO_PORT187, NULL);
-	gpio_request(GPIO_PORT188, NULL);
-	gpio_direction_output(GPIO_PORT185, 1);
-	gpio_direction_output(GPIO_PORT186, 1);
-	gpio_direction_output(GPIO_PORT187, 1);
-	gpio_direction_output(GPIO_PORT188, 1);
-	gpio_export(GPIO_PORT185, 0);
-	gpio_export(GPIO_PORT186, 0);
-	gpio_export(GPIO_PORT187, 0);
-	gpio_export(GPIO_PORT188, 0);
-
 	/* enable Debug switch (S6) */
 	gpio_request(GPIO_PORT32, NULL);
 	gpio_request(GPIO_PORT33, NULL);

arch/arm/mach-shmobile/clock-sh7372.c

@@ -286,7 +286,6 @@ static struct clk_ops pllc2_clk_ops = {
 
 struct clk pllc2_clk = {
 	.ops		= &pllc2_clk_ops,
-	.flags		= CLK_ENABLE_ON_INIT,
 	.parent		= &extal1_div2_clk,
 	.freq_table	= pllc2_freq_table,
 	.parent_table	= pllc2_parent,
@@ -395,7 +394,7 @@ static struct clk div6_reparent_clks[DIV6_REPARENT_NR] = {
 
 enum { MSTP001,
        MSTP131, MSTP130,
-       MSTP129, MSTP128,
+       MSTP129, MSTP128, MSTP127, MSTP126,
        MSTP118, MSTP117, MSTP116,
        MSTP106, MSTP101, MSTP100,
        MSTP223,
@@ -413,6 +412,8 @@ static struct clk mstp_clks[MSTP_NR] = {
 	[MSTP130] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 30, 0), /* VEU2 */
 	[MSTP129] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 29, 0), /* VEU1 */
 	[MSTP128] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 28, 0), /* VEU0 */
+	[MSTP127] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 27, 0), /* CEU */
+	[MSTP126] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 26, 0), /* CSI2 */
 	[MSTP118] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 18, 0), /* DSITX */
 	[MSTP117] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 17, 0), /* LCDC1 */
 	[MSTP116] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR1, 16, 0), /* IIC0 */
@@ -428,7 +429,7 @@ static struct clk mstp_clks[MSTP_NR] = {
 	[MSTP201] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 1, 0), /* SCIFA3 */
 	[MSTP200] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 0, 0), /* SCIFA4 */
 	[MSTP329] = MSTP(&r_clk, SMSTPCR3, 29, 0), /* CMT10 */
-	[MSTP328] = MSTP(&div6_clks[DIV6_SPU], SMSTPCR3, 28, CLK_ENABLE_ON_INIT), /* FSIA */
+	[MSTP328] = MSTP(&div6_clks[DIV6_SPU], SMSTPCR3, 28, 0), /* FSIA */
 	[MSTP323] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 23, 0), /* IIC1 */
 	[MSTP322] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 22, 0), /* USB0 */
 	[MSTP314] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 14, 0), /* SDHI0 */
@@ -498,6 +499,8 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("uio_pdrv_genirq.3", &mstp_clks[MSTP130]), /* VEU2 */
 	CLKDEV_DEV_ID("uio_pdrv_genirq.2", &mstp_clks[MSTP129]), /* VEU1 */
 	CLKDEV_DEV_ID("uio_pdrv_genirq.1", &mstp_clks[MSTP128]), /* VEU0 */
+	CLKDEV_DEV_ID("sh_mobile_ceu.0", &mstp_clks[MSTP127]), /* CEU */
+	CLKDEV_DEV_ID("sh-mobile-csi2.0", &mstp_clks[MSTP126]), /* CSI2 */
 	CLKDEV_DEV_ID("sh-mipi-dsi.0", &mstp_clks[MSTP118]), /* DSITX */
 	CLKDEV_DEV_ID("sh_mobile_lcdc_fb.1", &mstp_clks[MSTP117]), /* LCDC1 */
 	CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP116]), /* IIC0 */

arch/arm/mach-shmobile/clock.c

@@ -1,8 +1,10 @@
 /*
- * SH-Mobile Timer
+ * SH-Mobile Clock Framework
  *
  * Copyright (C) 2010  Magnus Damm
  *
+ * Used together with arch/arm/common/clkdev.c and drivers/sh/clk.c.
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; version 2 of the License.

arch/arm/mach-shmobile/pm_runtime.c

@@ -0,0 +1,169 @@
+/*
+ * arch/arm/mach-shmobile/pm_runtime.c
+ *
+ * Runtime PM support code for SuperH Mobile ARM
+ *
+ *  Copyright (C) 2009-2010 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/pm_runtime.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/sh_clk.h>
+#include <linux/bitmap.h>
+
+#ifdef CONFIG_PM_RUNTIME
+#define BIT_ONCE 0
+#define BIT_ACTIVE 1
+#define BIT_CLK_ENABLED 2
+
+struct pm_runtime_data {
+	unsigned long flags;
+	struct clk *clk;
+};
+
+static void __devres_release(struct device *dev, void *res)
+{
+	struct pm_runtime_data *prd = res;
+
+	dev_dbg(dev, "__devres_release()\n");
+
+	if (test_bit(BIT_CLK_ENABLED, &prd->flags))
+		clk_disable(prd->clk);
+
+	if (test_bit(BIT_ACTIVE, &prd->flags))
+		clk_put(prd->clk);
+}
+
+static struct pm_runtime_data *__to_prd(struct device *dev)
+{
+	return devres_find(dev, __devres_release, NULL, NULL);
+}
+
+static void platform_pm_runtime_init(struct device *dev,
+				     struct pm_runtime_data *prd)
+{
+	if (prd && !test_and_set_bit(BIT_ONCE, &prd->flags)) {
+		prd->clk = clk_get(dev, NULL);
+		if (!IS_ERR(prd->clk)) {
+			set_bit(BIT_ACTIVE, &prd->flags);
+			dev_info(dev, "clocks managed by runtime pm\n");
+		}
+	}
+}
+
+static void platform_pm_runtime_bug(struct device *dev,
+				    struct pm_runtime_data *prd)
+{
+	if (prd && !test_and_set_bit(BIT_ONCE, &prd->flags))
+		dev_err(dev, "runtime pm suspend before resume\n");
+}
+
+int platform_pm_runtime_suspend(struct device *dev)
+{
+	struct pm_runtime_data *prd = __to_prd(dev);
+
+	dev_dbg(dev, "platform_pm_runtime_suspend()\n");
+
+	platform_pm_runtime_bug(dev, prd);
+
+	if (prd && test_bit(BIT_ACTIVE, &prd->flags)) {
+		clk_disable(prd->clk);
+		clear_bit(BIT_CLK_ENABLED, &prd->flags);
+	}
+
+	return 0;
+}
+
+int platform_pm_runtime_resume(struct device *dev)
+{
+	struct pm_runtime_data *prd = __to_prd(dev);
+
+	dev_dbg(dev, "platform_pm_runtime_resume()\n");
+
+	platform_pm_runtime_init(dev, prd);
+
+	if (prd && test_bit(BIT_ACTIVE, &prd->flags)) {
+		clk_enable(prd->clk);
+		set_bit(BIT_CLK_ENABLED, &prd->flags);
+	}
+
+	return 0;
+}
+
+int platform_pm_runtime_idle(struct device *dev)
+{
+	/* suspend synchronously to disable clocks immediately */
+	return pm_runtime_suspend(dev);
+}
+
+static int platform_bus_notify(struct notifier_block *nb,
+			       unsigned long action, void *data)
+{
+	struct device *dev = data;
+	struct pm_runtime_data *prd;
+
+	dev_dbg(dev, "platform_bus_notify() %ld !\n", action);
+
+	if (action == BUS_NOTIFY_BIND_DRIVER) {
+		prd = devres_alloc(__devres_release, sizeof(*prd), GFP_KERNEL);
+		if (prd)
+			devres_add(dev, prd);
+		else
+			dev_err(dev, "unable to alloc memory for runtime pm\n");
+	}
+
+	return 0;
+}
+
+#else /* CONFIG_PM_RUNTIME */
+
+static int platform_bus_notify(struct notifier_block *nb,
+			       unsigned long action, void *data)
+{
+	struct device *dev = data;
+	struct clk *clk;
+
+	dev_dbg(dev, "platform_bus_notify() %ld !\n", action);
+
+	switch (action) {
+	case BUS_NOTIFY_BIND_DRIVER:
+		clk = clk_get(dev, NULL);
+		if (!IS_ERR(clk)) {
+			clk_enable(clk);
+			clk_put(clk);
+			dev_info(dev, "runtime pm disabled, clock forced on\n");
+		}
+		break;
+	case BUS_NOTIFY_UNBOUND_DRIVER:
+		clk = clk_get(dev, NULL);
+		if (!IS_ERR(clk)) {
+			clk_disable(clk);
+			clk_put(clk);
+			dev_info(dev, "runtime pm disabled, clock forced off\n");
+		}
+		break;
+	}
+
+	return 0;
+}
+
+#endif /* CONFIG_PM_RUNTIME */
+
+static struct notifier_block platform_bus_notifier = {
+	.notifier_call = platform_bus_notify
+};
+
+static int __init sh_pm_runtime_init(void)
+{
+	bus_register_notifier(&platform_bus_type, &platform_bus_notifier);
+	return 0;
+}
+core_initcall(sh_pm_runtime_init);

arch/arm/mm/Kconfig

@@ -398,7 +398,7 @@ config CPU_V6
 # ARMv6k
 config CPU_32v6K
 	bool "Support ARM V6K processor extensions" if !SMP
-	depends on CPU_V6
+	depends on CPU_V6 || CPU_V7
 	default y if SMP && !(ARCH_MX3 || ARCH_OMAP2)
 	help
 	  Say Y here if your ARMv6 processor supports the 'K' extension.

arch/arm/mm/dma-mapping.c

@@ -229,6 +229,8 @@ __dma_alloc_remap(struct page *page, size_t size, gfp_t gfp, pgprot_t prot)
 			}
 		} while (size -= PAGE_SIZE);
 
+		dsb();
+
 		return (void *)c->vm_start;
 	}
 	return NULL;

arch/arm/plat-mxc/Kconfig

@@ -43,6 +43,7 @@ config ARCH_MXC91231
 config ARCH_MX5
 	bool "MX5-based"
 	select CPU_V7
+	select ARM_L1_CACHE_SHIFT_6
 	help
 	  This enables support for systems based on the Freescale i.MX51 family
 

arch/arm/plat-mxc/include/mach/eukrea-baseboards.h

@@ -37,9 +37,9 @@
  * mach-mx5/eukrea_mbimx51-baseboard.c for cpuimx51
  */
 
-extern void eukrea_mbimx25_baseboard_init(void);
+extern void eukrea_mbimxsd25_baseboard_init(void);
 extern void eukrea_mbimx27_baseboard_init(void);
-extern void eukrea_mbimx35_baseboard_init(void);
+extern void eukrea_mbimxsd35_baseboard_init(void);
 extern void eukrea_mbimx51_baseboard_init(void);
 
 #endif

arch/arm/plat-mxc/tzic.c

@@ -164,8 +164,9 @@ int tzic_enable_wake(int is_idle)
 		return -EAGAIN;
 
 	for (i = 0; i < 4; i++) {
-		v = is_idle ? __raw_readl(TZIC_ENSET0(i)) : wakeup_intr[i];
-		__raw_writel(v, TZIC_WAKEUP0(i));
+		v = is_idle ? __raw_readl(tzic_base + TZIC_ENSET0(i)) :
+			wakeup_intr[i];
+		__raw_writel(v, tzic_base + TZIC_WAKEUP0(i));
 	}
 
 	return 0;

arch/arm/plat-pxa/pwm.c

@@ -176,7 +176,7 @@ static inline void __add_pwm(struct pwm_device *pwm)
 
 static int __devinit pwm_probe(struct platform_device *pdev)
 {
-	struct platform_device_id *id = platform_get_device_id(pdev);
+	const struct platform_device_id *id = platform_get_device_id(pdev);
 	struct pwm_device *pwm, *secondary = NULL;
 	struct resource *r;
 	int ret = 0;

arch/arm/plat-s5p/dev-fimc0.c

@@ -10,6 +10,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/dma-mapping.h>
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
@@ -18,7 +19,7 @@
 static struct resource s5p_fimc0_resource[] = {
 	[0] = {
 		.start	= S5P_PA_FIMC0,
-		.end	= S5P_PA_FIMC0 + SZ_1M - 1,
+		.end	= S5P_PA_FIMC0 + SZ_4K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -28,9 +29,15 @@ static struct resource s5p_fimc0_resource[] = {
 	},
 };
 
+static u64 s5p_fimc0_dma_mask = DMA_BIT_MASK(32);
+
 struct platform_device s5p_device_fimc0 = {
 	.name		= "s5p-fimc",
 	.id		= 0,
 	.num_resources	= ARRAY_SIZE(s5p_fimc0_resource),
 	.resource	= s5p_fimc0_resource,
+	.dev		= {
+		.dma_mask		= &s5p_fimc0_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
 };

arch/arm/plat-s5p/dev-fimc1.c

@@ -10,6 +10,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/dma-mapping.h>
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
@@ -18,7 +19,7 @@
 static struct resource s5p_fimc1_resource[] = {
 	[0] = {
 		.start	= S5P_PA_FIMC1,
-		.end	= S5P_PA_FIMC1 + SZ_1M - 1,
+		.end	= S5P_PA_FIMC1 + SZ_4K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -28,9 +29,15 @@ static struct resource s5p_fimc1_resource[] = {
 	},
 };
 
+static u64 s5p_fimc1_dma_mask = DMA_BIT_MASK(32);
+
 struct platform_device s5p_device_fimc1 = {
 	.name		= "s5p-fimc",
 	.id		= 1,
 	.num_resources	= ARRAY_SIZE(s5p_fimc1_resource),
 	.resource	= s5p_fimc1_resource,
+	.dev		= {
+		.dma_mask		= &s5p_fimc1_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
 };

arch/arm/plat-s5p/dev-fimc2.c

@@ -10,6 +10,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/dma-mapping.h>
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
@@ -18,7 +19,7 @@
 static struct resource s5p_fimc2_resource[] = {
 	[0] = {
 		.start	= S5P_PA_FIMC2,
-		.end	= S5P_PA_FIMC2 + SZ_1M - 1,
+		.end	= S5P_PA_FIMC2 + SZ_4K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -28,9 +29,15 @@ static struct resource s5p_fimc2_resource[] = {
 	},
 };
 
+static u64 s5p_fimc2_dma_mask = DMA_BIT_MASK(32);
+
 struct platform_device s5p_device_fimc2 = {
 	.name		= "s5p-fimc",
 	.id		= 2,
 	.num_resources	= ARRAY_SIZE(s5p_fimc2_resource),
 	.resource	= s5p_fimc2_resource,
+	.dev		= {
+		.dma_mask		= &s5p_fimc2_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
 };

arch/arm/plat-samsung/gpio-config.c

@@ -273,13 +273,13 @@ s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin)
 	if (!chip)
 		return -EINVAL;
 
-	off = chip->chip.base - pin;
+	off = pin - chip->chip.base;
 	shift = off * 2;
 	reg = chip->base + 0x0C;
 
 	drvstr = __raw_readl(reg);
-	drvstr = 0xffff & (0x3 << shift);
 	drvstr = drvstr >> shift;
+	drvstr &= 0x3;
 
 	return (__force s5p_gpio_drvstr_t)drvstr;
 }
@@ -296,11 +296,12 @@ int s5p_gpio_set_drvstr(unsigned int pin, s5p_gpio_drvstr_t drvstr)
 	if (!chip)
 		return -EINVAL;
 
-	off = chip->chip.base - pin;
+	off = pin - chip->chip.base;
 	shift = off * 2;
 	reg = chip->base + 0x0C;
 
 	tmp = __raw_readl(reg);
+	tmp &= ~(0x3 << shift);
 	tmp |= drvstr << shift;
 
 	__raw_writel(tmp, reg);

arch/arm/plat-samsung/include/plat/gpio-cfg.h

@@ -143,12 +143,12 @@ extern s3c_gpio_pull_t s3c_gpio_getpull(unsigned int pin);
 /* Define values for the drvstr available for each gpio pin.
  *
  * These values control the value of the output signal driver strength,
- * configurable on most pins on the S5C series.
+ * configurable on most pins on the S5P series.
  */
-#define S5P_GPIO_DRVSTR_LV1	((__force s5p_gpio_drvstr_t)0x00)
-#define S5P_GPIO_DRVSTR_LV2	((__force s5p_gpio_drvstr_t)0x01)
-#define S5P_GPIO_DRVSTR_LV3	((__force s5p_gpio_drvstr_t)0x10)
-#define S5P_GPIO_DRVSTR_LV4	((__force s5p_gpio_drvstr_t)0x11)
+#define S5P_GPIO_DRVSTR_LV1	((__force s5p_gpio_drvstr_t)0x0)
+#define S5P_GPIO_DRVSTR_LV2	((__force s5p_gpio_drvstr_t)0x2)
+#define S5P_GPIO_DRVSTR_LV3	((__force s5p_gpio_drvstr_t)0x1)
+#define S5P_GPIO_DRVSTR_LV4	((__force s5p_gpio_drvstr_t)0x3)
 
 /**
  * s5c_gpio_get_drvstr() - get the driver streght value of a gpio pin

arch/arm/tools/mach-types

@@ -12,7 +12,7 @@
 #
 #   http://www.arm.linux.org.uk/developer/machines/?action=new
 #
-# Last update: Mon Jul 12 21:10:14 2010
+# Last update: Thu Sep 9 22:43:01 2010
 #
 # machine_is_xxx	CONFIG_xxxx		MACH_TYPE_xxx		number
 #
@@ -2622,7 +2622,7 @@ kraken			MACH_KRAKEN		KRAKEN			2634
 gw2388			MACH_GW2388		GW2388			2635
 jadecpu			MACH_JADECPU		JADECPU			2636
 carlisle		MACH_CARLISLE		CARLISLE		2637
-lux_sf9			MACH_LUX_SFT9		LUX_SFT9		2638
+lux_sf9			MACH_LUX_SF9		LUX_SF9			2638
 nemid_tb		MACH_NEMID_TB		NEMID_TB		2639
 terrier			MACH_TERRIER		TERRIER			2640
 turbot			MACH_TURBOT		TURBOT			2641
@@ -2950,3 +2950,97 @@ davinci_dm365_dvr	MACH_DAVINCI_DM365_DVR	DAVINCI_DM365_DVR	2963
 netviz			MACH_NETVIZ		NETVIZ			2964
 flexibity		MACH_FLEXIBITY		FLEXIBITY		2965
 wlan_computer		MACH_WLAN_COMPUTER	WLAN_COMPUTER		2966
+lpc24xx			MACH_LPC24XX		LPC24XX			2967
+spica			MACH_SPICA		SPICA			2968
+gpsdisplay		MACH_GPSDISPLAY		GPSDISPLAY		2969
+bipnet			MACH_BIPNET		BIPNET			2970
+overo_ctu_inertial	MACH_OVERO_CTU_INERTIAL	OVERO_CTU_INERTIAL	2971
+davinci_dm355_mmm	MACH_DAVINCI_DM355_MMM	DAVINCI_DM355_MMM	2972
+pc9260_v2		MACH_PC9260_V2		PC9260_V2		2973
+ptx7545			MACH_PTX7545		PTX7545			2974
+tm_efdc			MACH_TM_EFDC		TM_EFDC			2975
+omap3_waldo1		MACH_OMAP3_WALDO1	OMAP3_WALDO1		2977
+flyer			MACH_FLYER		FLYER			2978
+tornado3240		MACH_TORNADO3240	TORNADO3240		2979
+soli_01			MACH_SOLI_01		SOLI_01			2980
+omapl138_europalc	MACH_OMAPL138_EUROPALC	OMAPL138_EUROPALC	2981
+helios_v1		MACH_HELIOS_V1		HELIOS_V1		2982
+netspace_lite_v2	MACH_NETSPACE_LITE_V2	NETSPACE_LITE_V2	2983
+ssc			MACH_SSC		SSC			2984
+premierwave_en		MACH_PREMIERWAVE_EN	PREMIERWAVE_EN		2985
+wasabi			MACH_WASABI		WASABI			2986
+vivow			MACH_VIVOW		VIVOW			2987
+mx50_rdp		MACH_MX50_RDP		MX50_RDP		2988
+universal		MACH_UNIVERSAL		UNIVERSAL		2989
+real6410		MACH_REAL6410		REAL6410		2990
+spx_sakura		MACH_SPX_SAKURA		SPX_SAKURA		2991
+ij3k_2440		MACH_IJ3K_2440		IJ3K_2440		2992
+omap3_bc10		MACH_OMAP3_BC10		OMAP3_BC10		2993
+thebe			MACH_THEBE		THEBE			2994
+rv082			MACH_RV082		RV082			2995
+armlguest		MACH_ARMLGUEST		ARMLGUEST		2996
+tjinc1000		MACH_TJINC1000		TJINC1000		2997
+dockstar		MACH_DOCKSTAR		DOCKSTAR		2998
+ax8008			MACH_AX8008		AX8008			2999
+gnet_sgce		MACH_GNET_SGCE		GNET_SGCE		3000
+pxwnas_500_1000		MACH_PXWNAS_500_1000	PXWNAS_500_1000		3001
+ea20			MACH_EA20		EA20			3002
+awm2			MACH_AWM2		AWM2			3003
+ti8148evm		MACH_TI8148EVM		TI8148EVM		3004
+tegra_seaboard		MACH_TEGRA_SEABOARD	TEGRA_SEABOARD		3005
+linkstation_chlv2	MACH_LINKSTATION_CHLV2	LINKSTATION_CHLV2	3006
+tera_pro2_rack		MACH_TERA_PRO2_RACK	TERA_PRO2_RACK		3007
+rubys			MACH_RUBYS		RUBYS			3008
+aquarius		MACH_AQUARIUS		AQUARIUS		3009
+mx53_ard		MACH_MX53_ARD		MX53_ARD		3010
+mx53_smd		MACH_MX53_SMD		MX53_SMD		3011
+lswxl			MACH_LSWXL		LSWXL			3012
+dove_avng_v3		MACH_DOVE_AVNG_V3	DOVE_AVNG_V3		3013
+sdi_ess_9263		MACH_SDI_ESS_9263	SDI_ESS_9263		3014
+jocpu550		MACH_JOCPU550		JOCPU550		3015
+msm8x60_rumi3		MACH_MSM8X60_RUMI3	MSM8X60_RUMI3		3016
+msm8x60_ffa		MACH_MSM8X60_FFA	MSM8X60_FFA		3017
+yanomami		MACH_YANOMAMI		YANOMAMI		3018
+gta04			MACH_GTA04		GTA04			3019
+cm_a510			MACH_CM_A510		CM_A510			3020
+omap3_rfs200		MACH_OMAP3_RFS200	OMAP3_RFS200		3021
+kx33xx			MACH_KX33XX		KX33XX			3022
+ptx7510			MACH_PTX7510		PTX7510			3023
+top9000			MACH_TOP9000		TOP9000			3024
+teenote			MACH_TEENOTE		TEENOTE			3025
+ts3			MACH_TS3		TS3			3026
+a0			MACH_A0			A0			3027
+fsm9xxx_surf		MACH_FSM9XXX_SURF	FSM9XXX_SURF		3028
+fsm9xxx_ffa		MACH_FSM9XXX_FFA	FSM9XXX_FFA		3029
+frrhwcdma60w		MACH_FRRHWCDMA60W	FRRHWCDMA60W		3030
+remus			MACH_REMUS		REMUS			3031
+at91cap7xdk		MACH_AT91CAP7XDK	AT91CAP7XDK		3032
+at91cap7stk		MACH_AT91CAP7STK	AT91CAP7STK		3033
+kt_sbc_sam9_1		MACH_KT_SBC_SAM9_1	KT_SBC_SAM9_1		3034
+oratisrouter		MACH_ORATISROUTER	ORATISROUTER		3035
+armada_xp_db		MACH_ARMADA_XP_DB	ARMADA_XP_DB		3036
+spdm			MACH_SPDM		SPDM			3037
+gtib			MACH_GTIB		GTIB			3038
+dgm3240			MACH_DGM3240		DGM3240			3039
+atlas_i_lpe		MACH_ATLAS_I_LPE	ATLAS_I_LPE		3040
+htcmega			MACH_HTCMEGA		HTCMEGA			3041
+tricorder		MACH_TRICORDER		TRICORDER		3042
+tx28			MACH_TX28		TX28			3043
+bstbrd			MACH_BSTBRD		BSTBRD			3044
+pwb3090			MACH_PWB3090		PWB3090			3045
+idea6410		MACH_IDEA6410		IDEA6410		3046
+qbc9263			MACH_QBC9263		QBC9263			3047
+borabora		MACH_BORABORA		BORABORA		3048
+valdez			MACH_VALDEZ		VALDEZ			3049
+ls9g20			MACH_LS9G20		LS9G20			3050
+mios_v1			MACH_MIOS_V1		MIOS_V1			3051
+s5pc110_crespo		MACH_S5PC110_CRESPO	S5PC110_CRESPO		3052
+controltek9g20		MACH_CONTROLTEK9G20	CONTROLTEK9G20		3053
+tin307			MACH_TIN307		TIN307			3054
+tin510			MACH_TIN510		TIN510			3055
+bluecheese		MACH_BLUECHEESE		BLUECHEESE		3057
+tem3x30			MACH_TEM3X30		TEM3X30			3058
+harvest_desoto		MACH_HARVEST_DESOTO	HARVEST_DESOTO		3059
+msm8x60_qrdc		MACH_MSM8X60_QRDC	MSM8X60_QRDC		3060
+spear900		MACH_SPEAR900		SPEAR900		3061
+pcontrol_g20		MACH_PCONTROL_G20	PCONTROL_G20		3062

arch/frv/kernel/signal.c

@@ -121,6 +121,9 @@ static int restore_sigcontext(struct sigcontext __user *sc, int *_gr8)
 	struct user_context *user = current->thread.user;
 	unsigned long tbr, psr;
 
+	/* Always make any pending restarted system calls return -EINTR */
+	current_thread_info()->restart_block.fn = do_no_restart_syscall;
+
 	tbr = user->i.tbr;
 	psr = user->i.psr;
 	if (copy_from_user(user, &sc->sc_context, sizeof(sc->sc_context)))
@@ -250,6 +253,8 @@ static int setup_frame(int sig, struct k_sigaction *ka, sigset_t *set)
 	struct sigframe __user *frame;
 	int rsig;
 
+	set_fs(USER_DS);
+
 	frame = get_sigframe(ka, sizeof(*frame));
 
 	if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
@@ -293,22 +298,23 @@ static int setup_frame(int sig, struct k_sigaction *ka, sigset_t *set)
 				   (unsigned long) (frame->retcode + 2));
 	}
 
-	/* set up registers for signal handler */
-	__frame->sp   = (unsigned long) frame;
-	__frame->lr   = (unsigned long) &frame->retcode;
-	__frame->gr8  = sig;
-
+	/* Set up registers for the signal handler */
 	if (current->personality & FDPIC_FUNCPTRS) {
 		struct fdpic_func_descriptor __user *funcptr =
 			(struct fdpic_func_descriptor __user *) ka->sa.sa_handler;
-		__get_user(__frame->pc, &funcptr->text);
-		__get_user(__frame->gr15, &funcptr->GOT);
+		struct fdpic_func_descriptor desc;
+		if (copy_from_user(&desc, funcptr, sizeof(desc)))
+			goto give_sigsegv;
+		__frame->pc = desc.text;
+		__frame->gr15 = desc.GOT;
 	} else {
 		__frame->pc   = (unsigned long) ka->sa.sa_handler;
 		__frame->gr15 = 0;
 	}
 
-	set_fs(USER_DS);
+	__frame->sp   = (unsigned long) frame;
+	__frame->lr   = (unsigned long) &frame->retcode;
+	__frame->gr8  = sig;
 
 	/* the tracer may want to single-step inside the handler */
 	if (test_thread_flag(TIF_SINGLESTEP))
@@ -323,7 +329,7 @@ static int setup_frame(int sig, struct k_sigaction *ka, sigset_t *set)
 	return 0;
 
 give_sigsegv:
-	force_sig(SIGSEGV, current);
+	force_sigsegv(sig, current);
 	return -EFAULT;
 
 } /* end setup_frame() */
@@ -338,6 +344,8 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 	struct rt_sigframe __user *frame;
 	int rsig;
 
+	set_fs(USER_DS);
+
 	frame = get_sigframe(ka, sizeof(*frame));
 
 	if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
@@ -392,22 +400,23 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 	}
 
 	/* Set up registers for signal handler */
-	__frame->sp  = (unsigned long) frame;
-	__frame->lr   = (unsigned long) &frame->retcode;
-	__frame->gr8 = sig;
-	__frame->gr9 = (unsigned long) &frame->info;
-
 	if (current->personality & FDPIC_FUNCPTRS) {
 		struct fdpic_func_descriptor __user *funcptr =
 			(struct fdpic_func_descriptor __user *) ka->sa.sa_handler;
-		__get_user(__frame->pc, &funcptr->text);
-		__get_user(__frame->gr15, &funcptr->GOT);
+		struct fdpic_func_descriptor desc;
+		if (copy_from_user(&desc, funcptr, sizeof(desc)))
+			goto give_sigsegv;
+		__frame->pc = desc.text;
+		__frame->gr15 = desc.GOT;
 	} else {
 		__frame->pc   = (unsigned long) ka->sa.sa_handler;
 		__frame->gr15 = 0;
 	}
 
-	set_fs(USER_DS);
+	__frame->sp  = (unsigned long) frame;
+	__frame->lr  = (unsigned long) &frame->retcode;
+	__frame->gr8 = sig;
+	__frame->gr9 = (unsigned long) &frame->info;
 
 	/* the tracer may want to single-step inside the handler */
 	if (test_thread_flag(TIF_SINGLESTEP))
@@ -422,7 +431,7 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 	return 0;
 
 give_sigsegv:
-	force_sig(SIGSEGV, current);
+	force_sigsegv(sig, current);
 	return -EFAULT;
 
 } /* end setup_rt_frame() */
@@ -437,7 +446,7 @@ static int handle_signal(unsigned long sig, siginfo_t *info,
 	int ret;
 
 	/* Are we from a system call? */
-	if (in_syscall(__frame)) {
+	if (__frame->syscallno != -1) {
 		/* If so, check system call restarting.. */
 		switch (__frame->gr8) {
 		case -ERESTART_RESTARTBLOCK:
@@ -456,6 +465,7 @@ static int handle_signal(unsigned long sig, siginfo_t *info,
 			__frame->gr8 = __frame->orig_gr8;
 			__frame->pc -= 4;
 		}
+		__frame->syscallno = -1;
 	}
 
 	/* Set up the stack frame */
@@ -538,10 +548,11 @@ no_signal:
 			break;
 
 		case -ERESTART_RESTARTBLOCK:
-			__frame->gr8 = __NR_restart_syscall;
+			__frame->gr7 = __NR_restart_syscall;
 			__frame->pc -= 4;
 			break;
 		}
+		__frame->syscallno = -1;
 	}
 
 	/* if there's no signal to deliver, we just put the saved sigmask

arch/h8300/include/asm/atomic.h

@@ -18,7 +18,8 @@
 
 static __inline__ int atomic_add_return(int i, atomic_t *v)
 {
-	int ret,flags;
+	unsigned long flags;
+	int ret;
 	local_irq_save(flags);
 	ret = v->counter += i;
 	local_irq_restore(flags);
@@ -30,7 +31,8 @@ static __inline__ int atomic_add_return(int i, atomic_t *v)
 
 static __inline__ int atomic_sub_return(int i, atomic_t *v)
 {
-	int ret,flags;
+	unsigned long flags;
+	int ret;
 	local_irq_save(flags);
 	ret = v->counter -= i;
 	local_irq_restore(flags);
@@ -42,7 +44,8 @@ static __inline__ int atomic_sub_return(int i, atomic_t *v)
 
 static __inline__ int atomic_inc_return(atomic_t *v)
 {
-	int ret,flags;
+	unsigned long flags;
+	int ret;
 	local_irq_save(flags);
 	v->counter++;
 	ret = v->counter;
@@ -64,7 +67,8 @@ static __inline__ int atomic_inc_return(atomic_t *v)
 
 static __inline__ int atomic_dec_return(atomic_t *v)
 {
-	int ret,flags;
+	unsigned long flags;
+	int ret;
 	local_irq_save(flags);
 	--v->counter;
 	ret = v->counter;
@@ -76,7 +80,8 @@ static __inline__ int atomic_dec_return(atomic_t *v)
 
 static __inline__ int atomic_dec_and_test(atomic_t *v)
 {
-	int ret,flags;
+	unsigned long flags;
+	int ret;
 	local_irq_save(flags);
 	--v->counter;
 	ret = v->counter;

arch/h8300/include/asm/system.h

@@ -3,6 +3,8 @@
 
 #include <linux/linkage.h>
 
+struct pt_regs;
+
 /*
  * switch_to(n) should switch tasks to task ptr, first checking that
  * ptr isn't the current task, in which case it does nothing.  This
@@ -155,6 +157,6 @@ static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int siz
 
 #define arch_align_stack(x) (x)
 
-void die(char *str, struct pt_regs *fp, unsigned long err);
+extern void die(const char *str, struct pt_regs *fp, unsigned long err);
 
 #endif /* _H8300_SYSTEM_H */

arch/h8300/kernel/sys_h8300.c

@@ -56,8 +56,8 @@ int kernel_execve(const char *filename,
 		  const char *const envp[])
 {
 	register long res __asm__("er0");
-	register char *const *_c __asm__("er3") = envp;
-	register char *const *_b __asm__("er2") = argv;
+	register const char *const *_c __asm__("er3") = envp;
+	register const char *const *_b __asm__("er2") = argv;
 	register const char * _a __asm__("er1") = filename;
 	__asm__ __volatile__ ("mov.l %1,er0\n\t"
 			"trapa	#0\n\t"

arch/h8300/kernel/traps.c

@@ -96,7 +96,7 @@ static void dump(struct pt_regs *fp)
 	printk("\n\n");
 }
 
-void die(char *str, struct pt_regs *fp, unsigned long err)
+void die(const char *str, struct pt_regs *fp, unsigned long err)
 {
 	static int diecount;
 

arch/ia64/include/asm/compat.h

@@ -199,7 +199,7 @@ ptr_to_compat(void __user *uptr)
 }
 
 static __inline__ void __user *
-compat_alloc_user_space (long len)
+arch_compat_alloc_user_space (long len)
 {
 	struct pt_regs *regs = task_pt_regs(current);
 	return (void __user *) (((regs->r12 & 0xffffffff) & -16) - len);

arch/ia64/kernel/fsys.S

@@ -420,22 +420,31 @@ EX(.fail_efault, ld8 r14=[r33])			// r14 <- *set
 	;;
 
 	RSM_PSR_I(p0, r18, r19)			// mask interrupt delivery
-	mov ar.ccv=0
 	andcm r14=r14,r17			// filter out SIGKILL & SIGSTOP
+	mov r8=EINVAL			// default to EINVAL
 
 #ifdef CONFIG_SMP
-	mov r17=1
+	// __ticket_spin_trylock(r31)
+	ld4 r17=[r31]
 	;;
-	cmpxchg4.acq r18=[r31],r17,ar.ccv	// try to acquire the lock
-	mov r8=EINVAL			// default to EINVAL
+	mov.m ar.ccv=r17
+	extr.u r9=r17,17,15
+	adds r19=1,r17
+	extr.u r18=r17,0,15
 	;;
+	cmp.eq p6,p7=r9,r18
+	;;
+(p6)	cmpxchg4.acq r9=[r31],r19,ar.ccv
+(p6)	dep.z r20=r19,1,15		// next serving ticket for unlock
+(p7)	br.cond.spnt.many .lock_contention
+	;;
+	cmp4.eq p0,p7=r9,r17
+	adds r31=2,r31
+(p7)	br.cond.spnt.many .lock_contention
 	ld8 r3=[r2]			// re-read current->blocked now that we hold the lock
-	cmp4.ne p6,p0=r18,r0
-(p6)	br.cond.spnt.many .lock_contention
 	;;
 #else
 	ld8 r3=[r2]			// re-read current->blocked now that we hold the lock
-	mov r8=EINVAL			// default to EINVAL
 #endif
 	add r18=IA64_TASK_PENDING_OFFSET+IA64_SIGPENDING_SIGNAL_OFFSET,r16
 	add r19=IA64_TASK_SIGNAL_OFFSET,r16
@@ -490,7 +499,9 @@ EX(.fail_efault, ld8 r14=[r33])			// r14 <- *set
 (p6)	br.cond.spnt.few 1b			// yes -> retry
 
 #ifdef CONFIG_SMP
-	st4.rel [r31]=r0			// release the lock
+	// __ticket_spin_unlock(r31)
+	st2.rel [r31]=r20
+	mov r20=0					// i must not leak kernel bits...
 #endif
 	SSM_PSR_I(p0, p9, r31)
 	;;
@@ -512,7 +523,8 @@ EX(.fail_efault, (p15) st8 [r34]=r3)
 
 .sig_pending:
 #ifdef CONFIG_SMP
-	st4.rel [r31]=r0			// release the lock
+	// __ticket_spin_unlock(r31)
+	st2.rel [r31]=r20			// release the lock
 #endif
 	SSM_PSR_I(p0, p9, r17)
 	;;

arch/m68k/include/asm/unistd.h

@@ -340,10 +340,13 @@
 #define __NR_set_thread_area	334
 #define __NR_atomic_cmpxchg_32	335
 #define __NR_atomic_barrier	336
+#define __NR_fanotify_init	337
+#define __NR_fanotify_mark	338
+#define __NR_prlimit64		339
 
 #ifdef __KERNEL__
 
-#define NR_syscalls		337
+#define NR_syscalls		340
 
 #define __ARCH_WANT_IPC_PARSE_VERSION
 #define __ARCH_WANT_OLD_READDIR

arch/m68k/kernel/entry.S

@@ -765,4 +765,7 @@ sys_call_table:
 	.long sys_set_thread_area
 	.long sys_atomic_cmpxchg_32	/* 335 */
 	.long sys_atomic_barrier
+	.long sys_fanotify_init
+	.long sys_fanotify_mark
+	.long sys_prlimit64
 

arch/m68knommu/kernel/syscalltable.S

@@ -355,6 +355,9 @@ ENTRY(sys_call_table)
 	.long sys_set_thread_area
 	.long sys_atomic_cmpxchg_32	/* 335 */
 	.long sys_atomic_barrier
+	.long sys_fanotify_init
+	.long sys_fanotify_mark
+	.long sys_prlimit64
 
 	.rept NR_syscalls-(.-sys_call_table)/4
 		.long sys_ni_syscall

arch/m68knommu/kernel/vmlinux.lds.S

@@ -150,6 +150,8 @@ SECTIONS {
 		_sdata = . ;
 		DATA_DATA
 		CACHELINE_ALIGNED_DATA(32)
+		PAGE_ALIGNED_DATA(PAGE_SIZE)
+		*(.data..shared_aligned)
 		INIT_TASK_DATA(THREAD_SIZE)
 		_edata = . ;
 	} > DATA

arch/mips/include/asm/compat.h

@@ -145,7 +145,7 @@ static inline compat_uptr_t ptr_to_compat(void __user *uptr)
 	return (u32)(unsigned long)uptr;
 }
 
-static inline void __user *compat_alloc_user_space(long len)
+static inline void __user *arch_compat_alloc_user_space(long len)
 {
 	struct pt_regs *regs = (struct pt_regs *)
 		((unsigned long) current_thread_info() + THREAD_SIZE - 32) - 1;

arch/mn10300/Kconfig

@@ -8,7 +8,6 @@ mainmenu "Linux Kernel Configuration"
 config MN10300
 	def_bool y
 	select HAVE_OPROFILE
-	select HAVE_ARCH_TRACEHOOK
 
 config AM33
 	def_bool y

arch/mn10300/include/asm/bitops.h

@@ -229,9 +229,9 @@ int ffs(int x)
 #include <asm-generic/bitops/hweight.h>
 
 #define ext2_set_bit_atomic(lock, nr, addr) \
-	test_and_set_bit((nr) ^ 0x18, (addr))
+	test_and_set_bit((nr), (addr))
 #define ext2_clear_bit_atomic(lock, nr, addr) \
-	test_and_clear_bit((nr) ^ 0x18, (addr))
+	test_and_clear_bit((nr), (addr))
 
 #include <asm-generic/bitops/ext2-non-atomic.h>
 #include <asm-generic/bitops/minix-le.h>

arch/mn10300/include/asm/signal.h

@@ -78,7 +78,7 @@ typedef unsigned long sigset_t;
 
 /* These should not be considered constants from userland.  */
 #define SIGRTMIN	32
-#define SIGRTMAX	(_NSIG-1)
+#define SIGRTMAX	_NSIG
 
 /*
  * SA_FLAGS values: