From 49b61ec9b5afdb739e07bc085ed12678bc932a22 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Mon, 21 Feb 2011 11:06:29 -0300 Subject: [PATCH] [media] gspca: Add new vicam subdriver This is a complete rewrite of the old v4l1 vicam subdriver, featuring multiple resolutions, gain + exposure control and still has less code. Oh and it is a v4l2 driver rather then v4l1 ofcourse :) Many thanks to Devin Heitmueller for donating his 3com homeconnect to me, which made this rewrite possible. Signed-off-by: Hans de Goede Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/Kconfig | 10 + drivers/media/video/gspca/Makefile | 2 + drivers/media/video/gspca/vicam.c | 381 +++++++++++++++++++++++++++++ 3 files changed, 393 insertions(+) create mode 100644 drivers/media/video/gspca/vicam.c diff --git a/drivers/media/video/gspca/Kconfig b/drivers/media/video/gspca/Kconfig index dda56ff834f4..a20f6ae88250 100644 --- a/drivers/media/video/gspca/Kconfig +++ b/drivers/media/video/gspca/Kconfig @@ -346,6 +346,16 @@ config USB_GSPCA_VC032X To compile this driver as a module, choose M here: the module will be called gspca_vc032x. +config USB_GSPCA_VICAM + tristate "ViCam USB Camera Driver" + depends on VIDEO_V4L2 && USB_GSPCA + help + Say Y here if you want support for the 3com homeconnect camera + (vicam). + + To compile this driver as a module, choose M here: the + module will be called gspca_vicam. + config USB_GSPCA_XIRLINK_CIT tristate "Xirlink C-It USB Camera Driver" depends on VIDEO_V4L2 && USB_GSPCA diff --git a/drivers/media/video/gspca/Makefile b/drivers/media/video/gspca/Makefile index 24e695b8b077..a0dbcfbab29c 100644 --- a/drivers/media/video/gspca/Makefile +++ b/drivers/media/video/gspca/Makefile @@ -34,6 +34,7 @@ obj-$(CONFIG_USB_GSPCA_STV0680) += gspca_stv0680.o obj-$(CONFIG_USB_GSPCA_T613) += gspca_t613.o obj-$(CONFIG_USB_GSPCA_TV8532) += gspca_tv8532.o obj-$(CONFIG_USB_GSPCA_VC032X) += gspca_vc032x.o +obj-$(CONFIG_USB_GSPCA_VICAM) += gspca_vicam.o obj-$(CONFIG_USB_GSPCA_XIRLINK_CIT) += gspca_xirlink_cit.o obj-$(CONFIG_USB_GSPCA_ZC3XX) += gspca_zc3xx.o @@ -73,6 +74,7 @@ gspca_sunplus-objs := sunplus.o gspca_t613-objs := t613.o gspca_tv8532-objs := tv8532.o gspca_vc032x-objs := vc032x.o +gspca_vicam-objs := vicam.o gspca_xirlink_cit-objs := xirlink_cit.o gspca_zc3xx-objs := zc3xx.o diff --git a/drivers/media/video/gspca/vicam.c b/drivers/media/video/gspca/vicam.c new file mode 100644 index 000000000000..84dfbab923b5 --- /dev/null +++ b/drivers/media/video/gspca/vicam.c @@ -0,0 +1,381 @@ +/* + * gspca ViCam subdriver + * + * Copyright (C) 2011 Hans de Goede + * + * Based on the usbvideo vicam driver, which is: + * + * Copyright (c) 2002 Joe Burks (jburks@wavicle.org), + * Christopher L Cheney (ccheney@cheney.cx), + * Pavel Machek (pavel@ucw.cz), + * John Tyner (jtyner@cs.ucr.edu), + * Monroe Williams (monroe@pobox.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#define MODULE_NAME "vicam" +#define HEADER_SIZE 64 + +#include +#include +#include +#include +#include "gspca.h" + +MODULE_AUTHOR("Hans de Goede "); +MODULE_DESCRIPTION("GSPCA ViCam USB Camera Driver"); +MODULE_LICENSE("GPL"); + +enum e_ctrl { + GAIN, + EXPOSURE, + NCTRL /* number of controls */ +}; + +struct sd { + struct gspca_dev gspca_dev; /* !! must be the first item */ + struct work_struct work_struct; + struct workqueue_struct *work_thread; + struct gspca_ctrl ctrls[NCTRL]; +}; + +/* The vicam sensor has a resolution of 512 x 244, with I believe square + pixels, but this is forced to a 4:3 ratio by optics. So it has + non square pixels :( */ +static struct v4l2_pix_format vicam_mode[] = { + { 256, 122, V4L2_PIX_FMT_SGRBG8, V4L2_FIELD_NONE, + .bytesperline = 256, + .sizeimage = 256 * 122, + .colorspace = V4L2_COLORSPACE_SRGB,}, + /* 2 modes with somewhat more square pixels */ + { 256, 200, V4L2_PIX_FMT_SGRBG8, V4L2_FIELD_NONE, + .bytesperline = 256, + .sizeimage = 256 * 200, + .colorspace = V4L2_COLORSPACE_SRGB,}, + { 256, 240, V4L2_PIX_FMT_SGRBG8, V4L2_FIELD_NONE, + .bytesperline = 256, + .sizeimage = 256 * 240, + .colorspace = V4L2_COLORSPACE_SRGB,}, +#if 0 /* This mode has extremely non square pixels, testing use only */ + { 512, 122, V4L2_PIX_FMT_SGRBG8, V4L2_FIELD_NONE, + .bytesperline = 512, + .sizeimage = 512 * 122, + .colorspace = V4L2_COLORSPACE_SRGB,}, +#endif + { 512, 244, V4L2_PIX_FMT_SGRBG8, V4L2_FIELD_NONE, + .bytesperline = 512, + .sizeimage = 512 * 244, + .colorspace = V4L2_COLORSPACE_SRGB,}, +}; + +static const struct ctrl sd_ctrls[] = { +[GAIN] = { + { + .id = V4L2_CID_GAIN, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Gain", + .minimum = 0, + .maximum = 255, + .step = 1, + .default_value = 200, + }, + }, +[EXPOSURE] = { + { + .id = V4L2_CID_EXPOSURE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Exposure", + .minimum = 0, + .maximum = 2047, + .step = 1, + .default_value = 256, + }, + }, +}; + +static int vicam_control_msg(struct gspca_dev *gspca_dev, u8 request, + u16 value, u16 index, u8 *data, u16 len) +{ + int ret; + + ret = usb_control_msg(gspca_dev->dev, + usb_sndctrlpipe(gspca_dev->dev, 0), + request, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + value, index, data, len, 1000); + if (ret < 0) + err("control msg req %02X error %d", request, ret); + + return ret; +} + +static int vicam_set_camera_power(struct gspca_dev *gspca_dev, int state) +{ + int ret; + + ret = vicam_control_msg(gspca_dev, 0x50, state, 0, NULL, 0); + if (ret < 0) + return ret; + + if (state) + ret = vicam_control_msg(gspca_dev, 0x55, 1, 0, NULL, 0); + + return ret; +} + +/* + * request and read a block of data - see warning on vicam_command. + */ +static int vicam_read_frame(struct gspca_dev *gspca_dev, u8 *data, int size) +{ + struct sd *sd = (struct sd *)gspca_dev; + int ret, unscaled_height, act_len = 0; + u8 *req_data = gspca_dev->usb_buf; + + memset(req_data, 0, 16); + req_data[0] = sd->ctrls[GAIN].val; + if (gspca_dev->width == 256) + req_data[1] |= 0x01; /* low nibble x-scale */ + if (gspca_dev->height <= 122) { + req_data[1] |= 0x10; /* high nibble y-scale */ + unscaled_height = gspca_dev->height * 2; + } else + unscaled_height = gspca_dev->height; + req_data[2] = 0x90; /* unknown, does not seem to do anything */ + if (unscaled_height <= 200) + req_data[3] = 0x06; /* vend? */ + else if (unscaled_height <= 242) /* Yes 242 not 240 */ + req_data[3] = 0x07; /* vend? */ + else /* Up to 244 lines with req_data[3] == 0x08 */ + req_data[3] = 0x08; /* vend? */ + + if (sd->ctrls[EXPOSURE].val < 256) { + /* Frame rate maxed out, use partial frame expo time */ + req_data[4] = 255 - sd->ctrls[EXPOSURE].val; + req_data[5] = 0x00; + req_data[6] = 0x00; + req_data[7] = 0x01; + } else { + /* Modify frame rate */ + req_data[4] = 0x00; + req_data[5] = 0x00; + req_data[6] = sd->ctrls[EXPOSURE].val & 0xFF; + req_data[7] = sd->ctrls[EXPOSURE].val >> 8; + } + req_data[8] = ((244 - unscaled_height) / 2) & ~0x01; /* vstart */ + /* bytes 9-15 do not seem to affect exposure or image quality */ + + mutex_lock(&gspca_dev->usb_lock); + ret = vicam_control_msg(gspca_dev, 0x51, 0x80, 0, req_data, 16); + mutex_unlock(&gspca_dev->usb_lock); + if (ret < 0) + return ret; + + ret = usb_bulk_msg(gspca_dev->dev, + usb_rcvbulkpipe(gspca_dev->dev, 0x81), + data, size, &act_len, 10000); + /* successful, it returns 0, otherwise negative */ + if (ret < 0 || act_len != size) { + err("bulk read fail (%d) len %d/%d", + ret, act_len, size); + return -EIO; + } + return 0; +} + +/* This function is called as a workqueue function and runs whenever the camera + * is streaming data. Because it is a workqueue function it is allowed to sleep + * so we can use synchronous USB calls. To avoid possible collisions with other + * threads attempting to use the camera's USB interface we take the gspca + * usb_lock when performing USB operations. In practice the only thing we need + * to protect against is the usb_set_interface call that gspca makes during + * stream_off as the camera doesn't provide any controls that the user could try + * to change. + */ +static void vicam_dostream(struct work_struct *work) +{ + struct sd *sd = container_of(work, struct sd, work_struct); + struct gspca_dev *gspca_dev = &sd->gspca_dev; + int ret, frame_sz; + u8 *buffer; + + frame_sz = gspca_dev->cam.cam_mode[gspca_dev->curr_mode].sizeimage + + HEADER_SIZE; + buffer = kmalloc(frame_sz, GFP_KERNEL | GFP_DMA); + if (!buffer) { + err("Couldn't allocate USB buffer"); + goto exit; + } + + while (gspca_dev->present && gspca_dev->streaming) { + ret = vicam_read_frame(gspca_dev, buffer, frame_sz); + if (ret < 0) + break; + + /* Note the frame header contents seem to be completely + constant, they do not change with either image, or + settings. So we simply discard it. The frames have + a very similar 64 byte footer, which we don't even + bother reading from the cam */ + gspca_frame_add(gspca_dev, FIRST_PACKET, + buffer + HEADER_SIZE, + frame_sz - HEADER_SIZE); + gspca_frame_add(gspca_dev, LAST_PACKET, NULL, 0); + } +exit: + kfree(buffer); +} + +/* This function is called at probe time just before sd_init */ +static int sd_config(struct gspca_dev *gspca_dev, + const struct usb_device_id *id) +{ + struct cam *cam = &gspca_dev->cam; + struct sd *sd = (struct sd *)gspca_dev; + + /* We don't use the buffer gspca allocates so make it small. */ + cam->bulk = 1; + cam->bulk_size = 64; + cam->cam_mode = vicam_mode; + cam->nmodes = ARRAY_SIZE(vicam_mode); + cam->ctrls = sd->ctrls; + + INIT_WORK(&sd->work_struct, vicam_dostream); + + return 0; +} + +/* this function is called at probe and resume time */ +static int sd_init(struct gspca_dev *gspca_dev) +{ + int ret; + const struct ihex_binrec *rec; + const struct firmware *uninitialized_var(fw); + u8 *firmware_buf; + + ret = request_ihex_firmware(&fw, "vicam/firmware.fw", + &gspca_dev->dev->dev); + if (ret) { + err("Failed to load \"vicam/firmware.fw\": %d\n", ret); + return ret; + } + + firmware_buf = kmalloc(PAGE_SIZE, GFP_KERNEL); + if (!firmware_buf) { + ret = -ENOMEM; + goto exit; + } + for (rec = (void *)fw->data; rec; rec = ihex_next_binrec(rec)) { + memcpy(firmware_buf, rec->data, be16_to_cpu(rec->len)); + ret = vicam_control_msg(gspca_dev, 0xff, 0, 0, firmware_buf, + be16_to_cpu(rec->len)); + if (ret < 0) + break; + } + + kfree(firmware_buf); +exit: + release_firmware(fw); + return ret; +} + +/* Set up for getting frames. */ +static int sd_start(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *)gspca_dev; + int ret; + + ret = vicam_set_camera_power(gspca_dev, 1); + if (ret < 0) + return ret; + + /* Start the workqueue function to do the streaming */ + sd->work_thread = create_singlethread_workqueue(MODULE_NAME); + queue_work(sd->work_thread, &sd->work_struct); + + return 0; +} + +/* called on streamoff with alt==0 and on disconnect */ +/* the usb_lock is held at entry - restore on exit */ +static void sd_stop0(struct gspca_dev *gspca_dev) +{ + struct sd *dev = (struct sd *)gspca_dev; + + /* wait for the work queue to terminate */ + mutex_unlock(&gspca_dev->usb_lock); + /* This waits for vicam_dostream to finish */ + destroy_workqueue(dev->work_thread); + dev->work_thread = NULL; + mutex_lock(&gspca_dev->usb_lock); + + vicam_set_camera_power(gspca_dev, 0); +} + +/* Table of supported USB devices */ +static const struct usb_device_id device_table[] = { + {USB_DEVICE(0x04c1, 0x009d)}, + {USB_DEVICE(0x0602, 0x1001)}, + {} +}; + +MODULE_DEVICE_TABLE(usb, device_table); + +/* sub-driver description */ +static const struct sd_desc sd_desc = { + .name = MODULE_NAME, + .ctrls = sd_ctrls, + .nctrls = ARRAY_SIZE(sd_ctrls), + .config = sd_config, + .init = sd_init, + .start = sd_start, + .stop0 = sd_stop0, +}; + +/* -- device connect -- */ +static int sd_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + return gspca_dev_probe(intf, id, + &sd_desc, + sizeof(struct sd), + THIS_MODULE); +} + +static struct usb_driver sd_driver = { + .name = MODULE_NAME, + .id_table = device_table, + .probe = sd_probe, + .disconnect = gspca_disconnect, +#ifdef CONFIG_PM + .suspend = gspca_suspend, + .resume = gspca_resume, +#endif +}; + +/* -- module insert / remove -- */ +static int __init sd_mod_init(void) +{ + return usb_register(&sd_driver); +} + +static void __exit sd_mod_exit(void) +{ + usb_deregister(&sd_driver); +} + +module_init(sd_mod_init); +module_exit(sd_mod_exit);