From 47d853ccbe7fc6b79aeddd97cf6f5b08bf81d58b Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Thu, 26 Jul 2007 11:41:33 -0400 Subject: [PATCH] [SCSI] advansys: remove INQUIRY sniffing Use slave_configure() to do all the work that used to be done in AscInquiryHandling and AdvInquiryHandling. Split slave_configure into two functions, one for wide and one for narrow controllers. Remove some unused definitions, duplicate definitions, unnecessary declarations, and scsireqq, cap_info and inquiry from struct asc_board. Signed-off-by: Matthew Wilcox Signed-off-by: James Bottomley --- drivers/scsi/advansys.c | 637 +++++++++++++--------------------------- 1 file changed, 211 insertions(+), 426 deletions(-) diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c index 277002a54601..5885ce4aad9a 100644 --- a/drivers/scsi/advansys.c +++ b/drivers/scsi/advansys.c @@ -944,10 +944,6 @@ typedef unsigned char uchar; #define ASC_MAX_CDB_LEN 12 #define ASC_SCSI_RESET_HOLD_TIME_US 60 -#define ADV_INQ_CLOCKING_ST_ONLY 0x0 -#define ADV_INQ_CLOCKING_DT_ONLY 0x1 -#define ADV_INQ_CLOCKING_ST_AND_DT 0x3 - /* * Inquiry SPC-2 SPI Byte 1 EVPD (Enable Vital Product Data) * and CmdDt (Command Support Data) field bit definitions. @@ -966,57 +962,8 @@ typedef unsigned char uchar; #define ASC_SRB_TID(x) ((uchar)((uchar)(x) & (uchar)0x0F)) #define ASC_SRB_LUN(x) ((uchar)((uint)(x) >> 13)) #define PUT_CDB1(x) ((uchar)((uint)(x) >> 8)) -#define MS_CMD_DONE 0x00 -#define MS_EXTEND 0x01 #define MS_SDTR_LEN 0x03 -#define MS_SDTR_CODE 0x01 #define MS_WDTR_LEN 0x02 -#define MS_WDTR_CODE 0x03 -#define MS_MDP_LEN 0x05 -#define MS_MDP_CODE 0x00 - -/* - * Inquiry data structure and bitfield macros - * - * Only quantities of more than 1 bit are shifted, since the others are - * just tested for true or false. C bitfields aren't portable between big - * and little-endian platforms so they are not used. - */ - -#define ASC_INQ_DVC_TYPE(inq) ((inq)->periph & 0x1f) -#define ASC_INQ_QUALIFIER(inq) (((inq)->periph & 0xe0) >> 5) -#define ASC_INQ_DVC_TYPE_MOD(inq) ((inq)->devtype & 0x7f) -#define ASC_INQ_REMOVABLE(inq) ((inq)->devtype & 0x80) -#define ASC_INQ_ANSI_VER(inq) ((inq)->ver & 0x07) -#define ASC_INQ_ECMA_VER(inq) (((inq)->ver & 0x38) >> 3) -#define ASC_INQ_ISO_VER(inq) (((inq)->ver & 0xc0) >> 6) -#define ASC_INQ_RESPONSE_FMT(inq) ((inq)->byte3 & 0x0f) -#define ASC_INQ_TERM_IO(inq) ((inq)->byte3 & 0x40) -#define ASC_INQ_ASYNC_NOTIF(inq) ((inq)->byte3 & 0x80) -#define ASC_INQ_SOFT_RESET(inq) ((inq)->flags & 0x01) -#define ASC_INQ_CMD_QUEUE(inq) ((inq)->flags & 0x02) -#define ASC_INQ_LINK_CMD(inq) ((inq)->flags & 0x08) -#define ASC_INQ_SYNC(inq) ((inq)->flags & 0x10) -#define ASC_INQ_WIDE16(inq) ((inq)->flags & 0x20) -#define ASC_INQ_WIDE32(inq) ((inq)->flags & 0x40) -#define ASC_INQ_REL_ADDR(inq) ((inq)->flags & 0x80) -#define ASC_INQ_INFO_UNIT(inq) ((inq)->info & 0x01) -#define ASC_INQ_QUICK_ARB(inq) ((inq)->info & 0x02) -#define ASC_INQ_CLOCKING(inq) (((inq)->info & 0x0c) >> 2) - -typedef struct { - uchar periph; - uchar devtype; - uchar ver; - uchar byte3; - uchar add_len; - uchar res1; - uchar res2; - uchar flags; - uchar vendor_id[8]; - uchar product_id[16]; - uchar product_rev_level[4]; -} ASC_SCSI_INQUIRY; #define ASC_SG_LIST_PER_Q 7 #define QS_FREE 0x00 @@ -1932,9 +1879,7 @@ static void DvcDelayNanoSecond(ASC_DVC_VAR *, ASC_DCNT); static void DvcPutScsiQ(PortAddr, ushort, uchar *, int); static void DvcGetQinfo(PortAddr, ushort, uchar *, int); static ushort AscInitAsc1000Driver(ASC_DVC_VAR *); -static void AscAsyncFix(ASC_DVC_VAR *, uchar, ASC_SCSI_INQUIRY *); -static int AscTagQueuingSafe(ASC_SCSI_INQUIRY *); -static void AscInquiryHandling(ASC_DVC_VAR *, uchar, ASC_SCSI_INQUIRY *); +static void AscAsyncFix(ASC_DVC_VAR *, struct scsi_device *); static int AscExeScsiQueue(ASC_DVC_VAR *, ASC_SCSI_Q *); static int AscISR(ASC_DVC_VAR *); static uint AscGetNumOfFreeQueue(ASC_DVC_VAR *, uchar, uchar); @@ -3081,7 +3026,6 @@ static int AdvResetSB(ADV_DVC_VAR *asc_dvc); * Internal Adv Library functions. */ static int AdvSendIdleCmd(ADV_DVC_VAR *, ushort, ADV_DCNT); -static void AdvInquiryHandling(ADV_DVC_VAR *, ADV_SCSI_REQ_Q *); static int AdvInitFrom3550EEP(ADV_DVC_VAR *); static int AdvInitFrom38C0800EEP(ADV_DVC_VAR *); static int AdvInitFrom38C1600EEP(ADV_DVC_VAR *); @@ -3295,74 +3239,6 @@ static ADVEEP_38C1600_CONFIG Default_38C1600_EEPROM_Config; (sizeof(ADV_SG_BLOCK) * \ ((ADV_MAX_SG_LIST + (NO_OF_SG_PER_BLOCK - 1))/NO_OF_SG_PER_BLOCK)) -/* - * Inquiry data structure and bitfield macros - * - * Using bitfields to access the subchar data isn't portable across - * endianness, so instead mask and shift. Only quantities of more - * than 1 bit are shifted, since the others are just tested for true - * or false. - */ - -#define ADV_INQ_DVC_TYPE(inq) ((inq)->periph & 0x1f) -#define ADV_INQ_QUALIFIER(inq) (((inq)->periph & 0xe0) >> 5) -#define ADV_INQ_DVC_TYPE_MOD(inq) ((inq)->devtype & 0x7f) -#define ADV_INQ_REMOVABLE(inq) ((inq)->devtype & 0x80) -#define ADV_INQ_ANSI_VER(inq) ((inq)->ver & 0x07) -#define ADV_INQ_ECMA_VER(inq) (((inq)->ver & 0x38) >> 3) -#define ADV_INQ_ISO_VER(inq) (((inq)->ver & 0xc0) >> 6) -#define ADV_INQ_RESPONSE_FMT(inq) ((inq)->byte3 & 0x0f) -#define ADV_INQ_TERM_IO(inq) ((inq)->byte3 & 0x40) -#define ADV_INQ_ASYNC_NOTIF(inq) ((inq)->byte3 & 0x80) -#define ADV_INQ_SOFT_RESET(inq) ((inq)->flags & 0x01) -#define ADV_INQ_CMD_QUEUE(inq) ((inq)->flags & 0x02) -#define ADV_INQ_LINK_CMD(inq) ((inq)->flags & 0x08) -#define ADV_INQ_SYNC(inq) ((inq)->flags & 0x10) -#define ADV_INQ_WIDE16(inq) ((inq)->flags & 0x20) -#define ADV_INQ_WIDE32(inq) ((inq)->flags & 0x40) -#define ADV_INQ_REL_ADDR(inq) ((inq)->flags & 0x80) -#define ADV_INQ_INFO_UNIT(inq) ((inq)->info & 0x01) -#define ADV_INQ_QUICK_ARB(inq) ((inq)->info & 0x02) -#define ADV_INQ_CLOCKING(inq) (((inq)->info & 0x0c) >> 2) - -typedef struct { - uchar periph; /* peripheral device type [0:4] */ - /* peripheral qualifier [5:7] */ - uchar devtype; /* device type modifier (for SCSI I) [0:6] */ - /* RMB - removable medium bit [7] */ - uchar ver; /* ANSI approved version [0:2] */ - /* ECMA version [3:5] */ - /* ISO version [6:7] */ - uchar byte3; /* response data format [0:3] */ - /* 0 SCSI 1 */ - /* 1 CCS */ - /* 2 SCSI-2 */ - /* 3-F reserved */ - /* reserved [4:5] */ - /* terminate I/O process bit (see 5.6.22) [6] */ - /* asynch. event notification (processor) [7] */ - uchar add_len; /* additional length */ - uchar res1; /* reserved */ - uchar res2; /* reserved */ - uchar flags; /* soft reset implemented [0] */ - /* command queuing [1] */ - /* reserved [2] */ - /* linked command for this logical unit [3] */ - /* synchronous data transfer [4] */ - /* wide bus 16 bit data transfer [5] */ - /* wide bus 32 bit data transfer [6] */ - /* relative addressing mode [7] */ - uchar vendor_id[8]; /* vendor identification */ - uchar product_id[16]; /* product identification */ - uchar product_rev_level[4]; /* product revision level */ - uchar vendor_specific[20]; /* vendor specific */ - uchar info; /* information unit supported [0] */ - /* quick arbitrate supported [1] */ - /* clocking field [2:3] */ - /* reserved [4:7] */ - uchar res3; /* reserved */ -} ADV_SCSI_INQUIRY; /* 58 bytes */ - /* * --- Driver Constants and Macros */ @@ -3771,10 +3647,6 @@ typedef struct asc_board { /* * The following fields are used only for Narrow Boards. */ - /* The following three structures must be in DMA-able memory. */ - ASC_SCSI_REQ_Q scsireqq; - ASC_CAP_INFO cap_info; - ASC_SCSI_INQUIRY inquiry; uchar sdtr_data[ASC_MAX_TID + 1]; /* SDTR information */ /* * The following fields are used only for Wide Boards. @@ -3809,8 +3681,6 @@ static int asc_dbglvl = 3; /* * --- Driver Function Prototypes - * - * advansys.h contains function prototypes for functions global to Linux. */ static int advansys_slave_configure(struct scsi_device *); @@ -4622,38 +4492,203 @@ static irqreturn_t advansys_interrupt(int irq, void *dev_id) return result; } +static void +advansys_narrow_slave_configure(struct scsi_device *sdev, ASC_DVC_VAR *asc_dvc) +{ + ASC_SCSI_BIT_ID_TYPE tid_bit = 1 << sdev->id; + ASC_SCSI_BIT_ID_TYPE orig_use_tagged_qng = asc_dvc->use_tagged_qng; + + if (sdev->lun == 0) { + ASC_SCSI_BIT_ID_TYPE orig_init_sdtr = asc_dvc->init_sdtr; + if ((asc_dvc->cfg->sdtr_enable & tid_bit) && sdev->sdtr) { + asc_dvc->init_sdtr |= tid_bit; + } else { + asc_dvc->init_sdtr &= ~tid_bit; + } + + if (orig_init_sdtr != asc_dvc->init_sdtr) + AscAsyncFix(asc_dvc, sdev); + } + + if (sdev->tagged_supported) { + if (asc_dvc->cfg->cmd_qng_enabled & tid_bit) { + if (sdev->lun == 0) { + asc_dvc->cfg->can_tagged_qng |= tid_bit; + asc_dvc->use_tagged_qng |= tid_bit; + } + scsi_adjust_queue_depth(sdev, MSG_ORDERED_TAG, + asc_dvc->max_dvc_qng[sdev->id]); + } + } else { + if (sdev->lun == 0) { + asc_dvc->cfg->can_tagged_qng &= ~tid_bit; + asc_dvc->use_tagged_qng &= ~tid_bit; + } + scsi_adjust_queue_depth(sdev, 0, sdev->host->cmd_per_lun); + } + + if ((sdev->lun == 0) && + (orig_use_tagged_qng != asc_dvc->use_tagged_qng)) { + AscWriteLramByte(asc_dvc->iop_base, ASCV_DISC_ENABLE_B, + asc_dvc->cfg->disc_enable); + AscWriteLramByte(asc_dvc->iop_base, ASCV_USE_TAGGED_QNG_B, + asc_dvc->use_tagged_qng); + AscWriteLramByte(asc_dvc->iop_base, ASCV_CAN_TAGGED_QNG_B, + asc_dvc->cfg->can_tagged_qng); + + asc_dvc->max_dvc_qng[sdev->id] = + asc_dvc->cfg->max_tag_qng[sdev->id]; + AscWriteLramByte(asc_dvc->iop_base, + (ushort)(ASCV_MAX_DVC_QNG_BEG + sdev->id), + asc_dvc->max_dvc_qng[sdev->id]); + } +} + +/* + * Wide Transfers + * + * If the EEPROM enabled WDTR for the device and the device supports wide + * bus (16 bit) transfers, then turn on the device's 'wdtr_able' bit and + * write the new value to the microcode. + */ +static void +advansys_wide_enable_wdtr(AdvPortAddr iop_base, unsigned short tidmask) +{ + unsigned short cfg_word; + AdvReadWordLram(iop_base, ASC_MC_WDTR_ABLE, cfg_word); + if ((cfg_word & tidmask) != 0) + return; + + cfg_word |= tidmask; + AdvWriteWordLram(iop_base, ASC_MC_WDTR_ABLE, cfg_word); + + /* + * Clear the microcode SDTR and WDTR negotiation done indicators for + * the target to cause it to negotiate with the new setting set above. + * WDTR when accepted causes the target to enter asynchronous mode, so + * SDTR must be negotiated. + */ + AdvReadWordLram(iop_base, ASC_MC_SDTR_DONE, cfg_word); + cfg_word &= ~tidmask; + AdvWriteWordLram(iop_base, ASC_MC_SDTR_DONE, cfg_word); + AdvReadWordLram(iop_base, ASC_MC_WDTR_DONE, cfg_word); + cfg_word &= ~tidmask; + AdvWriteWordLram(iop_base, ASC_MC_WDTR_DONE, cfg_word); +} + +/* + * Synchronous Transfers + * + * If the EEPROM enabled SDTR for the device and the device + * supports synchronous transfers, then turn on the device's + * 'sdtr_able' bit. Write the new value to the microcode. + */ +static void +advansys_wide_enable_sdtr(AdvPortAddr iop_base, unsigned short tidmask) +{ + unsigned short cfg_word; + AdvReadWordLram(iop_base, ASC_MC_SDTR_ABLE, cfg_word); + if ((cfg_word & tidmask) != 0) + return; + + cfg_word |= tidmask; + AdvWriteWordLram(iop_base, ASC_MC_SDTR_ABLE, cfg_word); + + /* + * Clear the microcode "SDTR negotiation" done indicator for the + * target to cause it to negotiate with the new setting set above. + */ + AdvReadWordLram(iop_base, ASC_MC_SDTR_DONE, cfg_word); + cfg_word &= ~tidmask; + AdvWriteWordLram(iop_base, ASC_MC_SDTR_DONE, cfg_word); +} + +/* + * PPR (Parallel Protocol Request) Capable + * + * If the device supports DT mode, then it must be PPR capable. + * The PPR message will be used in place of the SDTR and WDTR + * messages to negotiate synchronous speed and offset, transfer + * width, and protocol options. + */ +static void advansys_wide_enable_ppr(ADV_DVC_VAR *adv_dvc, + AdvPortAddr iop_base, unsigned short tidmask) +{ + AdvReadWordLram(iop_base, ASC_MC_PPR_ABLE, adv_dvc->ppr_able); + adv_dvc->ppr_able |= tidmask; + AdvWriteWordLram(iop_base, ASC_MC_PPR_ABLE, adv_dvc->ppr_able); +} + +static void +advansys_wide_slave_configure(struct scsi_device *sdev, ADV_DVC_VAR *adv_dvc) +{ + AdvPortAddr iop_base = adv_dvc->iop_base; + unsigned short tidmask = 1 << sdev->id; + + if (sdev->lun == 0) { + /* + * Handle WDTR, SDTR, and Tag Queuing. If the feature + * is enabled in the EEPROM and the device supports the + * feature, then enable it in the microcode. + */ + + if ((adv_dvc->wdtr_able & tidmask) && sdev->wdtr) + advansys_wide_enable_wdtr(iop_base, tidmask); + if ((adv_dvc->sdtr_able & tidmask) && sdev->sdtr) + advansys_wide_enable_sdtr(iop_base, tidmask); + if (adv_dvc->chip_type == ADV_CHIP_ASC38C1600 && sdev->ppr) + advansys_wide_enable_ppr(adv_dvc, iop_base, tidmask); + + /* + * Tag Queuing is disabled for the BIOS which runs in polled + * mode and would see no benefit from Tag Queuing. Also by + * disabling Tag Queuing in the BIOS devices with Tag Queuing + * bugs will at least work with the BIOS. + */ + if ((adv_dvc->tagqng_able & tidmask) && + sdev->tagged_supported) { + unsigned short cfg_word; + AdvReadWordLram(iop_base, ASC_MC_TAGQNG_ABLE, cfg_word); + cfg_word |= tidmask; + AdvWriteWordLram(iop_base, ASC_MC_TAGQNG_ABLE, + cfg_word); + AdvWriteByteLram(iop_base, + ASC_MC_NUMBER_OF_MAX_CMD + sdev->id, + adv_dvc->max_dvc_qng); + } + } + + if ((adv_dvc->tagqng_able & tidmask) && sdev->tagged_supported) { + scsi_adjust_queue_depth(sdev, MSG_ORDERED_TAG, + adv_dvc->max_dvc_qng); + } else { + scsi_adjust_queue_depth(sdev, 0, sdev->host->cmd_per_lun); + } +} + /* * Set the number of commands to queue per device for the * specified host adapter. */ -static int advansys_slave_configure(struct scsi_device *device) +static int advansys_slave_configure(struct scsi_device *sdev) { - asc_board_t *boardp; - - boardp = ASC_BOARDP(device->host); + asc_board_t *boardp = ASC_BOARDP(sdev->host); boardp->flags |= ASC_SELECT_QUEUE_DEPTHS; + /* - * Save a pointer to the device and set its initial/maximum + * Save a pointer to the sdev and set its initial/maximum * queue depth. Only save the pointer for a lun0 dev though. */ - if (device->lun == 0) - boardp->device[device->id] = device; - if (device->tagged_supported) { - if (ASC_NARROW_BOARD(boardp)) { - scsi_adjust_queue_depth(device, MSG_ORDERED_TAG, - boardp->dvc_var.asc_dvc_var. - max_dvc_qng[device->id]); - } else { - scsi_adjust_queue_depth(device, MSG_ORDERED_TAG, - boardp->dvc_var.adv_dvc_var. - max_dvc_qng); - } - } else { - scsi_adjust_queue_depth(device, 0, device->host->cmd_per_lun); - } - ASC_DBG4(1, - "advansys_slave_configure: device 0x%lx, boardp 0x%lx, id %d, depth %d\n", - (ulong)device, (ulong)boardp, device->id, device->queue_depth); + if (sdev->lun == 0) + boardp->device[sdev->id] = sdev; + + if (ASC_NARROW_BOARD(boardp)) + advansys_narrow_slave_configure(sdev, + &boardp->dvc_var.asc_dvc_var); + else + advansys_wide_slave_configure(sdev, + &boardp->dvc_var.adv_dvc_var); + return 0; } @@ -5405,22 +5440,11 @@ static void asc_isr_callback(ASC_DVC_VAR *asc_dvc_varp, ASC_QDONE_INFO *qdonep) ASC_DBG(2, "asc_isr_callback: QD_NO_ERROR\n"); scp->result = 0; - /* - * If an INQUIRY command completed successfully, then call - * the AscInquiryHandling() function to set-up the device. - */ - if (scp->cmnd[0] == INQUIRY && scp->device->lun == 0 && - (scp->request_bufflen - qdonep->remain_bytes) >= 8) { - AscInquiryHandling(asc_dvc_varp, scp->device->id & 0x7, - (ASC_SCSI_INQUIRY *)scp-> - request_buffer); - } - /* * Check for an underrun condition. * * If there was no error and an underrun condition, then - * then return the number of underrun bytes. + * return the number of underrun bytes. */ if (scp->request_bufflen != 0 && qdonep->remain_bytes != 0 && qdonep->remain_bytes <= scp->request_bufflen) { @@ -8229,8 +8253,8 @@ static int AscIsrChipHalted(ASC_DVC_VAR *asc_dvc) (uchar *)&ext_msg, sizeof(EXT_MSG) >> 1); - if (ext_msg.msg_type == MS_EXTEND && - ext_msg.msg_req == MS_SDTR_CODE && + if (ext_msg.msg_type == EXTENDED_MESSAGE && + ext_msg.msg_req == EXTENDED_SDTR && ext_msg.msg_len == MS_SDTR_LEN) { sdtr_accept = TRUE; if ((ext_msg.req_ack_offset > ASC_SYN_MAX_OFFSET)) { @@ -8312,8 +8336,8 @@ static int AscIsrChipHalted(ASC_DVC_VAR *asc_dvc) q_cntl); AscWriteLramWord(iop_base, ASCV_HALTCODE_W, 0); return (0); - } else if (ext_msg.msg_type == MS_EXTEND && - ext_msg.msg_req == MS_WDTR_CODE && + } else if (ext_msg.msg_type == EXTENDED_MESSAGE && + ext_msg.msg_req == EXTENDED_WDTR && ext_msg.msg_len == MS_WDTR_LEN) { ext_msg.wdtr_width = 0; @@ -8406,9 +8430,9 @@ static int AscIsrChipHalted(ASC_DVC_VAR *asc_dvc) (uchar *)&out_msg, sizeof(EXT_MSG) >> 1); - if ((out_msg.msg_type == MS_EXTEND) && + if ((out_msg.msg_type == EXTENDED_MESSAGE) && (out_msg.msg_len == MS_SDTR_LEN) && - (out_msg.msg_req == MS_SDTR_CODE)) { + (out_msg.msg_req == EXTENDED_SDTR)) { asc_dvc->init_sdtr &= ~target_id; asc_dvc->sdtr_done &= ~target_id; @@ -9901,9 +9925,9 @@ AscMsgOutSDTR(ASC_DVC_VAR *asc_dvc, uchar sdtr_period, uchar sdtr_offset) PortAddr iop_base; iop_base = asc_dvc->iop_base; - sdtr_buf.msg_type = MS_EXTEND; + sdtr_buf.msg_type = EXTENDED_MESSAGE; sdtr_buf.msg_len = MS_SDTR_LEN; - sdtr_buf.msg_req = MS_SDTR_CODE; + sdtr_buf.msg_req = EXTENDED_SDTR; sdtr_buf.xfer_period = sdtr_period; sdtr_offset &= ASC_SYN_MAX_OFFSET; sdtr_buf.req_ack_offset = sdtr_offset; @@ -10985,91 +11009,31 @@ AscSetEEPConfig(PortAddr iop_base, ASCEEP_CONFIG *cfg_buf, ushort bus_type) return (n_error); } -static void -AscAsyncFix(ASC_DVC_VAR *asc_dvc, uchar tid_no, ASC_SCSI_INQUIRY *inq) +static void AscAsyncFix(ASC_DVC_VAR *asc_dvc, struct scsi_device *sdev) { - uchar dvc_type; - ASC_SCSI_BIT_ID_TYPE tid_bits; - - dvc_type = ASC_INQ_DVC_TYPE(inq); - tid_bits = ASC_TIX_TO_TARGET_ID(tid_no); + char type = sdev->type; + ASC_SCSI_BIT_ID_TYPE tid_bits = 1 << sdev->id; if (asc_dvc->bug_fix_cntl & ASC_BUG_FIX_ASYN_USE_SYN) { if (!(asc_dvc->init_sdtr & tid_bits)) { - if ((dvc_type == TYPE_ROM) && - (strncmp(inq->vendor_id, "HP ", 3) == 0)) { + if ((type == TYPE_ROM) && + (strncmp(sdev->vendor, "HP ", 3) == 0)) { asc_dvc->pci_fix_asyn_xfer_always |= tid_bits; } asc_dvc->pci_fix_asyn_xfer |= tid_bits; - if ((dvc_type == TYPE_PROCESSOR) || - (dvc_type == TYPE_SCANNER) || - (dvc_type == TYPE_ROM) || (dvc_type == TYPE_TAPE)) { + if ((type == TYPE_PROCESSOR) || + (type == TYPE_SCANNER) || (type == TYPE_ROM) || + (type == TYPE_TAPE)) { asc_dvc->pci_fix_asyn_xfer &= ~tid_bits; } if (asc_dvc->pci_fix_asyn_xfer & tid_bits) { AscSetRunChipSynRegAtID(asc_dvc->iop_base, - tid_no, - ASYN_SDTR_DATA_FIX_PCI_REV_AB); + sdev->id, + ASYN_SDTR_DATA_FIX_PCI_REV_AB); } } } - return; -} - -static int AscTagQueuingSafe(ASC_SCSI_INQUIRY *inq) -{ - if ((inq->add_len >= 32) && - (strncmp(inq->vendor_id, "QUANTUM XP34301", 15) == 0) && - (strncmp(inq->product_rev_level, "1071", 4) == 0)) { - return 0; - } - return 1; -} - -static void -AscInquiryHandling(ASC_DVC_VAR *asc_dvc, uchar tid_no, ASC_SCSI_INQUIRY *inq) -{ - ASC_SCSI_BIT_ID_TYPE tid_bit = ASC_TIX_TO_TARGET_ID(tid_no); - ASC_SCSI_BIT_ID_TYPE orig_init_sdtr, orig_use_tagged_qng; - - orig_init_sdtr = asc_dvc->init_sdtr; - orig_use_tagged_qng = asc_dvc->use_tagged_qng; - - asc_dvc->init_sdtr &= ~tid_bit; - asc_dvc->cfg->can_tagged_qng &= ~tid_bit; - asc_dvc->use_tagged_qng &= ~tid_bit; - - if (ASC_INQ_RESPONSE_FMT(inq) >= 2 || ASC_INQ_ANSI_VER(inq) >= 2) { - if ((asc_dvc->cfg->sdtr_enable & tid_bit) && ASC_INQ_SYNC(inq)) { - asc_dvc->init_sdtr |= tid_bit; - } - if ((asc_dvc->cfg->cmd_qng_enabled & tid_bit) && - ASC_INQ_CMD_QUEUE(inq)) { - if (AscTagQueuingSafe(inq)) { - asc_dvc->use_tagged_qng |= tid_bit; - asc_dvc->cfg->can_tagged_qng |= tid_bit; - } - } - } - if (orig_use_tagged_qng != asc_dvc->use_tagged_qng) { - AscWriteLramByte(asc_dvc->iop_base, ASCV_DISC_ENABLE_B, - asc_dvc->cfg->disc_enable); - AscWriteLramByte(asc_dvc->iop_base, ASCV_USE_TAGGED_QNG_B, - asc_dvc->use_tagged_qng); - AscWriteLramByte(asc_dvc->iop_base, ASCV_CAN_TAGGED_QNG_B, - asc_dvc->cfg->can_tagged_qng); - - asc_dvc->max_dvc_qng[tid_no] = - asc_dvc->cfg->max_tag_qng[tid_no]; - AscWriteLramByte(asc_dvc->iop_base, - (ushort)(ASCV_MAX_DVC_QNG_BEG + tid_no), - asc_dvc->max_dvc_qng[tid_no]); - } - if (orig_init_sdtr != asc_dvc->init_sdtr) { - AscAsyncFix(asc_dvc, tid_no, inq); - } - return; } static uchar AscReadLramByte(PortAddr iop_base, ushort addr) @@ -13998,7 +13962,7 @@ static int AdvInitAsc3550Driver(ADV_DVC_VAR *asc_dvc) /* * Microcode operating variables for WDTR, SDTR, and command tag - * queuing will be set in AdvInquiryHandling() based on what a + * queuing will be set in slave_configure() based on what a * device reports it is capable of in Inquiry byte 7. * * If SCSI Bus Resets have been disabled, then directly set @@ -14649,7 +14613,7 @@ static int AdvInitAsc38C0800Driver(ADV_DVC_VAR *asc_dvc) /* * Microcode operating variables for WDTR, SDTR, and command tag - * queuing will be set in AdvInquiryHandling() based on what a + * queuing will be set in slave_configure() based on what a * device reports it is capable of in Inquiry byte 7. * * If SCSI Bus Resets have been disabled, then directly set @@ -15269,7 +15233,7 @@ static int AdvInitAsc38C1600Driver(ADV_DVC_VAR *asc_dvc) /* * Microcode operating variables for WDTR, SDTR, and command tag - * queuing will be set in AdvInquiryHandling() based on what a + * queuing will be set in slave_configure() based on what a * device reports it is capable of in Inquiry byte 7. * * If SCSI Bus Resets have been disabled, then directly set @@ -16952,23 +16916,6 @@ static int AdvISR(ADV_DVC_VAR *asc_dvc) */ scsiq->cntl = 0; - /* - * If the command that completed was a SCSI INQUIRY and - * LUN 0 was sent the command, then process the INQUIRY - * command information for the device. - * - * Note: If data returned were either VPD or CmdDt data, - * don't process the INQUIRY command information for - * the device, otherwise may erroneously set *_able bits. - */ - if (scsiq->done_status == QD_NO_ERROR && - scsiq->cdb[0] == INQUIRY && - scsiq->target_lun == 0 && - (scsiq->cdb[1] & ADV_INQ_RTN_VPD_AND_CMDDT) - == ADV_INQ_RTN_STD_INQUIRY_DATA) { - AdvInquiryHandling(asc_dvc, scsiq); - } - /* * Notify the driver of the completed request by passing * the ADV_SCSI_REQ_Q pointer to its callback function. @@ -17074,168 +17021,6 @@ AdvSendIdleCmd(ADV_DVC_VAR *asc_dvc, return ADV_ERROR; } -/* - * Inquiry Information Byte 7 Handling - * - * Handle SCSI Inquiry Command information for a device by setting - * microcode operating variables that affect WDTR, SDTR, and Tag - * Queuing. - */ -static void AdvInquiryHandling(ADV_DVC_VAR *asc_dvc, ADV_SCSI_REQ_Q *scsiq) -{ - AdvPortAddr iop_base; - uchar tid; - ADV_SCSI_INQUIRY *inq; - ushort tidmask; - ushort cfg_word; - - /* - * AdvInquiryHandling() requires up to INQUIRY information Byte 7 - * to be available. - * - * If less than 8 bytes of INQUIRY information were requested or less - * than 8 bytes were transferred, then return. cdb[4] is the request - * length and the ADV_SCSI_REQ_Q 'data_cnt' field is set by the - * microcode to the transfer residual count. - */ - - if (scsiq->cdb[4] < 8 || - (scsiq->cdb[4] - le32_to_cpu(scsiq->data_cnt)) < 8) { - return; - } - - iop_base = asc_dvc->iop_base; - tid = scsiq->target_id; - - inq = (ADV_SCSI_INQUIRY *) scsiq->vdata_addr; - - /* - * WDTR, SDTR, and Tag Queuing cannot be enabled for old devices. - */ - if (ADV_INQ_RESPONSE_FMT(inq) < 2 && ADV_INQ_ANSI_VER(inq) < 2) { - return; - } else { - /* - * INQUIRY Byte 7 Handling - * - * Use a device's INQUIRY byte 7 to determine whether it - * supports WDTR, SDTR, and Tag Queuing. If the feature - * is enabled in the EEPROM and the device supports the - * feature, then enable it in the microcode. - */ - - tidmask = ADV_TID_TO_TIDMASK(tid); - - /* - * Wide Transfers - * - * If the EEPROM enabled WDTR for the device and the device - * supports wide bus (16 bit) transfers, then turn on the - * device's 'wdtr_able' bit and write the new value to the - * microcode. - */ - if ((asc_dvc->wdtr_able & tidmask) && ADV_INQ_WIDE16(inq)) { - AdvReadWordLram(iop_base, ASC_MC_WDTR_ABLE, cfg_word); - if ((cfg_word & tidmask) == 0) { - cfg_word |= tidmask; - AdvWriteWordLram(iop_base, ASC_MC_WDTR_ABLE, - cfg_word); - - /* - * Clear the microcode "SDTR negotiation" and "WDTR - * negotiation" done indicators for the target to cause - * it to negotiate with the new setting set above. - * WDTR when accepted causes the target to enter - * asynchronous mode, so SDTR must be negotiated. - */ - AdvReadWordLram(iop_base, ASC_MC_SDTR_DONE, - cfg_word); - cfg_word &= ~tidmask; - AdvWriteWordLram(iop_base, ASC_MC_SDTR_DONE, - cfg_word); - AdvReadWordLram(iop_base, ASC_MC_WDTR_DONE, - cfg_word); - cfg_word &= ~tidmask; - AdvWriteWordLram(iop_base, ASC_MC_WDTR_DONE, - cfg_word); - } - } - - /* - * Synchronous Transfers - * - * If the EEPROM enabled SDTR for the device and the device - * supports synchronous transfers, then turn on the device's - * 'sdtr_able' bit. Write the new value to the microcode. - */ - if ((asc_dvc->sdtr_able & tidmask) && ADV_INQ_SYNC(inq)) { - AdvReadWordLram(iop_base, ASC_MC_SDTR_ABLE, cfg_word); - if ((cfg_word & tidmask) == 0) { - cfg_word |= tidmask; - AdvWriteWordLram(iop_base, ASC_MC_SDTR_ABLE, - cfg_word); - - /* - * Clear the microcode "SDTR negotiation" done indicator - * for the target to cause it to negotiate with the new - * setting set above. - */ - AdvReadWordLram(iop_base, ASC_MC_SDTR_DONE, - cfg_word); - cfg_word &= ~tidmask; - AdvWriteWordLram(iop_base, ASC_MC_SDTR_DONE, - cfg_word); - } - } - /* - * If the Inquiry data included enough space for the SPI-3 - * Clocking field, then check if DT mode is supported. - */ - if (asc_dvc->chip_type == ADV_CHIP_ASC38C1600 && - (scsiq->cdb[4] >= 57 || - (scsiq->cdb[4] - le32_to_cpu(scsiq->data_cnt)) >= 57)) { - /* - * PPR (Parallel Protocol Request) Capable - * - * If the device supports DT mode, then it must be PPR capable. - * The PPR message will be used in place of the SDTR and WDTR - * messages to negotiate synchronous speed and offset, transfer - * width, and protocol options. - */ - if (ADV_INQ_CLOCKING(inq) & ADV_INQ_CLOCKING_DT_ONLY) { - AdvReadWordLram(iop_base, ASC_MC_PPR_ABLE, - asc_dvc->ppr_able); - asc_dvc->ppr_able |= tidmask; - AdvWriteWordLram(iop_base, ASC_MC_PPR_ABLE, - asc_dvc->ppr_able); - } - } - - /* - * If the EEPROM enabled Tag Queuing for the device and the - * device supports Tag Queueing, then turn on the device's - * 'tagqng_enable' bit in the microcode and set the microcode - * maximum command count to the ADV_DVC_VAR 'max_dvc_qng' - * value. - * - * Tag Queuing is disabled for the BIOS which runs in polled - * mode and would see no benefit from Tag Queuing. Also by - * disabling Tag Queuing in the BIOS devices with Tag Queuing - * bugs will at least work with the BIOS. - */ - if ((asc_dvc->tagqng_able & tidmask) && ADV_INQ_CMD_QUEUE(inq)) { - AdvReadWordLram(iop_base, ASC_MC_TAGQNG_ABLE, cfg_word); - cfg_word |= tidmask; - AdvWriteWordLram(iop_base, ASC_MC_TAGQNG_ABLE, - cfg_word); - - AdvWriteByteLram(iop_base, - ASC_MC_NUMBER_OF_MAX_CMD + tid, - asc_dvc->max_dvc_qng); - } - } -} - static int __devinit advansys_wide_init_chip(asc_board_t *boardp, ADV_DVC_VAR *adv_dvc_varp) {