korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-12-14 22:44:27 +08:00
Code Issues Packages Projects Releases Wiki Activity

i.MX fixes for 5.10, 3rd round:

Browse Source 
- A series from Krzysztof Kozlowski to fix missing PMIC's interrupt
   line pull-up for i.MX8MM and i.MX8MN boards.
 - Set Bluetooth chip max-speed to 4000000 on imx8mm-beacon-som board
   to fix the choppy Bluetooth audio sound.
 - Remove non-existent OTG2, usbphynop2, and the usbmisc2 from i.MX8MN
   device tree.
 - Fix the endianness setting of RCPM node on Layerscape SoCs.
 - Add the missing dma-coherent property for qoriq-fman device to improve
   the performance.
 - Fix the Ethernet PHY address on imx6q-prti6q board.
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAl+fStkUHHNoYXduZ3Vv
 QGtlcm5lbC5vcmcACgkQUFdYWoewfM6UJggAgRnnMfVrvpZqZSYlj3CirW4jOeeo
 oxkh8L3XcvOh5f1StI15879a93E5fq4CLoVUda5vdWJLO8Q0pl5VGJsTfzNpekAY
 mswq8ratwKragLOX8FhSr/YLICoF6qLmIDn0EtAuOwLrcii4i5pgLqj0t/5MQm9U
 NyAbb/nYZWWm2S8szOaB6+OfYbXxV9YHMFkFL9ZetppS/ezYq3UNq2i//aTBB33z
 wFhqt8+scuT3cikdtFumb+vbMMYtUcGfJxkgLEoQz3P53WL1w0jzJXQ47egWI6/d
 16zEUavTk9WUKcWS8knY8KKToVaU6GKIr+JLUOczWOhMPUtxANsLvLOmjQ==
 =M32F
 -----END PGP SIGNATURE-----

Merge tag 'imx-fixes-5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes

i.MX fixes for 5.10, 3rd round:

- A series from Krzysztof Kozlowski to fix missing PMIC's interrupt
  line pull-up for i.MX8MM and i.MX8MN boards.
- Set Bluetooth chip max-speed to 4000000 on imx8mm-beacon-som board
  to fix the choppy Bluetooth audio sound.
- Remove non-existent OTG2, usbphynop2, and the usbmisc2 from i.MX8MN
  device tree.
- Fix the endianness setting of RCPM node on Layerscape SoCs.
- Add the missing dma-coherent property for qoriq-fman device to improve
  the performance.
- Fix the Ethernet PHY address on imx6q-prti6q board.

* tag 'imx-fixes-5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: dts: imx6q-prti6q: fix PHY address
  arm64: dts imx8mn: Remove non-existent USB OTG2
  arm64: dts: imx8mm-beacon-som: Fix Choppy BT audio
  arm64: dts: fsl: DPAA FMan DMA operations are coherent
  arm64: dts: fsl: fix endianness issue of rcpm
  arm64: dts: imx8mn-evk: fix missing PMIC's interrupt line pull-up
  arm64: dts: imx8mn-ddr4-evk: fix missing PMIC's interrupt line pull-up
  arm64: dts: imx8mn-var-som: fix missing PMIC's interrupt line pull-up
  arm64: dts: imx8mm-evk: fix missing PMIC's interrupt line pull-up
  arm64: dts: imx8mm-beacon-som: fix missing PMIC's interrupt line pull-up
  arm64: dts: imx8mm-var-som: fix missing PMIC's interrupt line pull-up

Link: https://lore.kernel.org/r/20201030151821.GA28266@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This commit is contained in:
Arnd Bergmann 2020-11-13 13:07:53 +01:00
commit 47cd1eac33
12 changed files with 17 additions and 44 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
arch/arm/boot/dts/imx6q-prti6q.dts
View File

@ -213,8 +213,8 @@
#size-cells = <0>;
/* Microchip KSZ9031RNX PHY */
rgmii_phy: ethernet-phy@4 {
reg = <4>;
rgmii_phy: ethernet-phy@0 {
reg = <0>;
interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>;
reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
reset-assert-us = <10000>;

1
arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
View File

@ -1012,6 +1012,7 @@
compatible = "fsl,ls1028a-rcpm", "fsl,qoriq-rcpm-2.1+";
reg = <0x0 0x1e34040 0x0 0x1c>;
#fsl,rcpm-wakeup-cells = <7>;
little-endian;
};
ftm_alarm0: timer@2800000 {

1
arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
View File

@ -805,6 +805,7 @@
compatible = "fsl,ls1088a-rcpm", "fsl,qoriq-rcpm-2.1+";
reg = <0x0 0x1e34040 0x0 0x18>;
#fsl,rcpm-wakeup-cells = <6>;
little-endian;
};
ftm_alarm0: timer@2800000 {

1
arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
View File

@ -892,6 +892,7 @@
compatible = "fsl,ls208xa-rcpm", "fsl,qoriq-rcpm-2.1+";
reg = <0x0 0x1e34040 0x0 0x18>;
#fsl,rcpm-wakeup-cells = <6>;
little-endian;
};
ftm_alarm0: timer@2800000 {

2
arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
View File

@ -72,6 +72,7 @@
pmic@4b {
compatible = "rohm,bd71847";
reg = <0x4b>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pmic>;
interrupt-parent = <&gpio1>;
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
@ -210,6 +211,7 @@
host-wakeup-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
device-wakeup-gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>;
clocks = <&osc_32k>;
max-speed = <4000000>;
clock-names = "extclk";
};
};

1
arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
View File

@ -121,6 +121,7 @@
pmic@4b {
compatible = "rohm,bd71847";
reg = <0x4b>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pmic>;
interrupt-parent = <&gpio1>;
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;

9
arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi
View File

@ -135,13 +135,10 @@
pmic@4b {
compatible = "rohm,bd71847";
reg = <0x4b>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pmic>;
interrupt-parent = <&gpio2>;
/*
* The interrupt is not correct. It should be level low,
* however with internal pull up this causes IRQ storm.
*/
interrupts = <8 IRQ_TYPE_EDGE_RISING>;
interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
rohm,reset-snvs-powered;
#clock-cells = <0>;
@ -398,7 +395,7 @@
pinctrl_pmic: pmicirqgrp {
fsl,pins = <
MX8MM_IOMUXC_SD1_DATA6_GPIO2_IO8 0x41
MX8MM_IOMUXC_SD1_DATA6_GPIO2_IO8 0x141
>;
};

1
arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
View File

@ -53,6 +53,7 @@
pmic@4b {
compatible = "rohm,bd71847";
reg = <0x4b>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pmic>;
interrupt-parent = <&gpio1>;
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;

1
arch/arm64/boot/dts/freescale/imx8mn-evk.dts
View File

@ -18,6 +18,7 @@
pmic: pmic@25 {
compatible = "nxp,pca9450b";
reg = <0x25>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pmic>;
interrupt-parent = <&gpio1>;
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;

9
arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi
View File

@ -116,13 +116,10 @@
pmic@4b {
compatible = "rohm,bd71847";
reg = <0x4b>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pmic>;
interrupt-parent = <&gpio2>;
/*
* The interrupt is not correct. It should be level low,
* however with internal pull up this causes IRQ storm.
*/
interrupts = <8 IRQ_TYPE_EDGE_RISING>;
interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
rohm,reset-snvs-powered;
regulators {
@ -388,7 +385,7 @@
pinctrl_pmic: pmicirqgrp {
fsl,pins = <
MX8MN_IOMUXC_SD1_DATA6_GPIO2_IO8 0x101
MX8MN_IOMUXC_SD1_DATA6_GPIO2_IO8 0x141
>;
};

30
arch/arm64/boot/dts/freescale/imx8mn.dtsi
View File

@ -790,28 +790,6 @@
#index-cells = <1>;
reg = <0x32e40200 0x200>;
};
usbotg2: usb@32e50000 {
compatible = "fsl,imx8mn-usb", "fsl,imx7d-usb";
reg = <0x32e50000 0x200>;
interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MN_CLK_USB1_CTRL_ROOT>;
clock-names = "usb1_ctrl_root_clk";
assigned-clocks = <&clk IMX8MN_CLK_USB_BUS>,
<&clk IMX8MN_CLK_USB_CORE_REF>;
assigned-clock-parents = <&clk IMX8MN_SYS_PLL2_500M>,
<&clk IMX8MN_SYS_PLL1_100M>;
fsl,usbphy = <&usbphynop2>;
fsl,usbmisc = <&usbmisc2 0>;
status = "disabled";
};
usbmisc2: usbmisc@32e50200 {
compatible = "fsl,imx8mn-usbmisc", "fsl,imx7d-usbmisc";
#index-cells = <1>;
reg = <0x32e50200 0x200>;
};
};
dma_apbh: dma-controller@33000000 {
@ -876,12 +854,4 @@
assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_100M>;
clock-names = "main_clk";
};
usbphynop2: usbphynop2 {
compatible = "usb-nop-xceiv";
clocks = <&clk IMX8MN_CLK_USB_PHY_REF>;
assigned-clocks = <&clk IMX8MN_CLK_USB_PHY_REF>;
assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_100M>;
clock-names = "main_clk";
};
};

1
arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi
View File

@ -19,6 +19,7 @@ fman0: fman@1a00000 {
clock-names = "fmanclk";
fsl,qman-channel-range = <0x800 0x10>;
ptimer-handle = <&ptp_timer0>;
dma-coherent;
muram@0 {
compatible = "fsl,fman-muram";