mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-20 10:44:23 +08:00
ARM: dts: imx7d: cl-som-imx7: add basic module support
CL-SOM-iMX7 is a miniature System-on-Module (SoM) based on Freescale i.MX7 System-on-Chip family. http://www.compulab.co.il/products/computer-on-modules/cl-som-imx7-freescale-i-mx-7-system-on-module/ Add basic DT support for standalone module (without a carrier board): * Memory configuration * eMMC * 2x Gigabit Ethernet ports (FEC1 and FEC2) * I2C2 bus * EEPROM * PCA9555 GPIO extender * PMIC * UART1 * USB OTG port Signed-off-by: Ilya Ledvich <ilya@compulab.co.il> Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
This commit is contained in:
Ilya Ledvich
Shawn Guo
parent
f736c596f4
commit
470f269ce3
@ -352,6 +352,7 @@ dtb-$(CONFIG_SOC_IMX6SX) += \
|
||||
dtb-$(CONFIG_SOC_IMX6UL) += \
|
||||
imx6ul-14x14-evk.dtb
|
||||
dtb-$(CONFIG_SOC_IMX7D) += \
|
||||
imx7d-cl-som-imx7.dtb \
|
||||
imx7d-sdb.dtb
|
||||
dtb-$(CONFIG_SOC_LS1021A) += \
|
||||
ls1021a-qds.dtb \
|
||||
|
||||
286
arch/arm/boot/dts/imx7d-cl-som-imx7.dts
Normal file
286
arch/arm/boot/dts/imx7d-cl-som-imx7.dts
Normal file
@ -0,0 +1,286 @@
|
||||
/*
|
||||
* Support for CompuLab CL-SOM-iMX7 System-on-Module
|
||||
*
|
||||
* Copyright (C) 2015 CompuLab Ltd. - http://www.compulab.co.il/
|
||||
* Author: Ilya Ledvich <ilya@compulab.co.il>
|
||||
*
|
||||
* This file is dual-licensed: you can use it either under the terms
|
||||
* of the GPL or the X11 license, at your option. Note that this dual
|
||||
* licensing only applies to this file, and not this project as a
|
||||
* whole.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include "imx7d.dtsi"
|
||||
|
||||
/ {
|
||||
model = "CompuLab CL-SOM-iMX7";
|
||||
compatible = "compulab,cl-som-imx7", "fsl,imx7d";
|
||||
|
||||
memory {
|
||||
reg = <0x80000000 0x10000000>; /* 256 MB - minimal configuration */
|
||||
};
|
||||
|
||||
reg_usb_otg1_vbus: regulator-vbus {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "usb_otg1_vbus";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
};
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
arm-supply = <&sw1a_reg>;
|
||||
};
|
||||
|
||||
&fec1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_enet1>;
|
||||
assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
|
||||
<&clks IMX7D_ENET1_TIME_ROOT_CLK>;
|
||||
assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
|
||||
assigned-clock-rates = <0>, <100000000>;
|
||||
phy-mode = "rgmii";
|
||||
phy-handle = <ðphy0>;
|
||||
fsl,magic-packet;
|
||||
status = "okay";
|
||||
|
||||
mdio {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
ethphy0: ethernet-phy@0 {
|
||||
reg = <0>;
|
||||
};
|
||||
|
||||
ethphy1: ethernet-phy@1 {
|
||||
reg = <1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&fec2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_enet2>;
|
||||
assigned-clocks = <&clks IMX7D_ENET2_TIME_ROOT_SRC>,
|
||||
<&clks IMX7D_ENET2_TIME_ROOT_CLK>;
|
||||
assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
|
||||
assigned-clock-rates = <0>, <100000000>;
|
||||
phy-mode = "rgmii";
|
||||
phy-handle = <ðphy1>;
|
||||
fsl,magic-packet;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_i2c2>;
|
||||
status = "okay";
|
||||
|
||||
pmic: pmic@8 {
|
||||
compatible = "fsl,pfuze3000";
|
||||
reg = <0x08>;
|
||||
|
||||
regulators {
|
||||
sw1a_reg: sw1a {
|
||||
regulator-min-microvolt = <700000>;
|
||||
regulator-max-microvolt = <1475000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-ramp-delay = <6250>;
|
||||
};
|
||||
|
||||
/* use sw1c_reg to align with pfuze100/pfuze200 */
|
||||
sw1c_reg: sw1b {
|
||||
regulator-min-microvolt = <700000>;
|
||||
regulator-max-microvolt = <1475000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-ramp-delay = <6250>;
|
||||
};
|
||||
|
||||
sw2_reg: sw2 {
|
||||
regulator-min-microvolt = <1500000>;
|
||||
regulator-max-microvolt = <1850000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
sw3a_reg: sw3 {
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <1650000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
swbst_reg: swbst {
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5150000>;
|
||||
};
|
||||
|
||||
snvs_reg: vsnvs {
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vref_reg: vrefddr {
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vgen1_reg: vldo1 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vgen2_reg: vldo2 {
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <1550000>;
|
||||
};
|
||||
|
||||
vgen3_reg: vccsd {
|
||||
regulator-min-microvolt = <2850000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vgen4_reg: v33 {
|
||||
regulator-min-microvolt = <2850000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vgen5_reg: vldo3 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vgen6_reg: vldo4 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
pca9555: pca9555@20 {
|
||||
compatible = "nxp,pca9555";
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
reg = <0x20>;
|
||||
};
|
||||
|
||||
eeprom@50 {
|
||||
compatible = "atmel,24c08";
|
||||
reg = <0x50>;
|
||||
pagesize = <16>;
|
||||
};
|
||||
};
|
||||
|
||||
&uart1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_uart1>;
|
||||
assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>;
|
||||
assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbotg1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usbotg1>;
|
||||
vbus-supply = <®_usb_otg1_vbus>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usdhc3 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usdhc3>;
|
||||
assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
|
||||
assigned-clock-rates = <400000000>;
|
||||
bus-width = <8>;
|
||||
fsl,tuning-step = <2>;
|
||||
non-removable;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&iomuxc {
|
||||
pinctrl_enet1: enet1grp {
|
||||
fsl,pins = <
|
||||
MX7D_PAD_SD2_CD_B__ENET1_MDIO 0x3
|
||||
MX7D_PAD_SD2_WP__ENET1_MDC 0x3
|
||||
MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC 0x1
|
||||
MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x1
|
||||
MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x1
|
||||
MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 0x1
|
||||
MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 0x1
|
||||
MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x1
|
||||
MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC 0x1
|
||||
MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x1
|
||||
MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x1
|
||||
MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x1
|
||||
MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x1
|
||||
MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_enet2: enet2grp {
|
||||
fsl,pins = <
|
||||
MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC 0x1
|
||||
MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0 0x1
|
||||
MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1 0x1
|
||||
MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2 0x1
|
||||
MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3 0x1
|
||||
MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL 0x1
|
||||
MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC 0x1
|
||||
MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0 0x1
|
||||
MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1 0x1
|
||||
MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2 0x1
|
||||
MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3 0x1
|
||||
MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL 0x1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_i2c2: i2c2grp {
|
||||
fsl,pins = <
|
||||
MX7D_PAD_I2C2_SDA__I2C2_SDA 0x4000007f
|
||||
MX7D_PAD_I2C2_SCL__I2C2_SCL 0x4000007f
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_uart1: uart1grp {
|
||||
fsl,pins = <
|
||||
MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79
|
||||
MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX 0x79
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usbotg1: usbotg1grp {
|
||||
fsl,pins = <
|
||||
MX7D_PAD_GPIO1_IO05__GPIO1_IO5 0x14 /* OTG PWREN */
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usdhc3: usdhc3grp {
|
||||
fsl,pins = <
|
||||
MX7D_PAD_SD3_CMD__SD3_CMD 0x59
|
||||
MX7D_PAD_SD3_CLK__SD3_CLK 0x19
|
||||
MX7D_PAD_SD3_DATA0__SD3_DATA0 0x59
|
||||
MX7D_PAD_SD3_DATA1__SD3_DATA1 0x59
|
||||
MX7D_PAD_SD3_DATA2__SD3_DATA2 0x59
|
||||
MX7D_PAD_SD3_DATA3__SD3_DATA3 0x59
|
||||
MX7D_PAD_SD3_DATA4__SD3_DATA4 0x59
|
||||
MX7D_PAD_SD3_DATA5__SD3_DATA5 0x59
|
||||
MX7D_PAD_SD3_DATA6__SD3_DATA6 0x59
|
||||
MX7D_PAD_SD3_DATA7__SD3_DATA7 0x59
|
||||
MX7D_PAD_SD3_STROBE__SD3_STROBE 0x19
|
||||
>;
|
||||
};
|
||||
};
|
||||
Loading…
Reference in New Issue
Block a user