gpio: Setup parent device and get rid of unnecessary of_node assignment

Some of the drivers do not set parent device. This may lead to obstacles
during debugging or understanding the device relations from the Linux
point of view. Assign parent device for GPIO chips created by these
drivers.

While at it, let GPIO library to assign of_node from the parent device.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
This commit is contained in:
Andy Shevchenko 2021-12-06 15:18:51 +02:00 committed by Bartosz Golaszewski
parent 448cf90513
commit 45a541a610
4 changed files with 6 additions and 8 deletions

View File

@ -606,7 +606,7 @@ static int bcm_kona_gpio_probe(struct platform_device *pdev)
kona_gpio->pdev = pdev;
platform_set_drvdata(pdev, kona_gpio);
chip->of_node = dev->of_node;
chip->parent = dev;
chip->ngpio = kona_gpio->num_bank * GPIO_PER_BANK;
kona_gpio->irq_domain = irq_domain_add_linear(dev->of_node,

View File

@ -163,12 +163,12 @@ static int creg_gpio_probe(struct platform_device *pdev)
spin_lock_init(&hcg->lock);
hcg->gc.parent = dev;
hcg->gc.label = dev_name(dev);
hcg->gc.base = -1;
hcg->gc.ngpio = ngpios;
hcg->gc.set = creg_gpio_set;
hcg->gc.direction_output = creg_gpio_dir_out;
hcg->gc.of_node = dev->of_node;
ret = devm_gpiochip_add_data(dev, &hcg->gc, hcg);
if (ret)

View File

@ -512,10 +512,10 @@ static int lpc32xx_gpio_probe(struct platform_device *pdev)
return PTR_ERR(reg_base);
for (i = 0; i < ARRAY_SIZE(lpc32xx_gpiochip); i++) {
lpc32xx_gpiochip[i].chip.parent = &pdev->dev;
if (pdev->dev.of_node) {
lpc32xx_gpiochip[i].chip.of_xlate = lpc32xx_of_xlate;
lpc32xx_gpiochip[i].chip.of_gpio_n_cells = 3;
lpc32xx_gpiochip[i].chip.of_node = pdev->dev.of_node;
lpc32xx_gpiochip[i].reg_base = reg_base;
}
devm_gpiochip_add_data(&pdev->dev, &lpc32xx_gpiochip[i].chip,

View File

@ -343,8 +343,7 @@ static int pxa_gpio_of_xlate(struct gpio_chip *gc,
}
#endif
static int pxa_init_gpio_chip(struct pxa_gpio_chip *pchip, int ngpio,
struct device_node *np, void __iomem *regbase)
static int pxa_init_gpio_chip(struct pxa_gpio_chip *pchip, int ngpio, void __iomem *regbase)
{
int i, gpio, nbanks = DIV_ROUND_UP(ngpio, 32);
struct pxa_gpio_bank *bank;
@ -354,6 +353,7 @@ static int pxa_init_gpio_chip(struct pxa_gpio_chip *pchip, int ngpio,
if (!pchip->banks)
return -ENOMEM;
pchip->chip.parent = pchip->dev;
pchip->chip.label = "gpio-pxa";
pchip->chip.direction_input = pxa_gpio_direction_input;
pchip->chip.direction_output = pxa_gpio_direction_output;
@ -365,7 +365,6 @@ static int pxa_init_gpio_chip(struct pxa_gpio_chip *pchip, int ngpio,
pchip->chip.free = gpiochip_generic_free;
#ifdef CONFIG_OF_GPIO
pchip->chip.of_node = np;
pchip->chip.of_xlate = pxa_gpio_of_xlate;
pchip->chip.of_gpio_n_cells = 2;
#endif
@ -675,8 +674,7 @@ static int pxa_gpio_probe(struct platform_device *pdev)
}
/* Initialize GPIO chips */
ret = pxa_init_gpio_chip(pchip, pxa_last_gpio + 1, pdev->dev.of_node,
gpio_reg_base);
ret = pxa_init_gpio_chip(pchip, pxa_last_gpio + 1, gpio_reg_base);
if (ret) {
clk_put(clk);
return ret;