V4L/DVB: Remove the usage of I2C_HW_B_CX2388x on ir-kbd-i2c.c

Move the cx88 specific initialization for Hauppauge XVR remotes
into cx88-input, removing the need for test it inside ir-kbd-i2c.

The reference at cx88 for this symbol, at:

drivers/media/video/cx88/cx88-i2c.c:    core->i2c_adap.id = I2C_HW_B_CX2388x;
drivers/media/video/cx88/cx88-vp3054-i2c.c:     vp3054_i2c->adap.id = I2C_HW_B_CX2388x;

Can't be removed yet, since lirc-i2c still uses it.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This commit is contained in:
Mauro Carvalho Chehab 2010-09-23 00:51:44 -03:00
parent c0c4682627
commit 44243fc2ef
4 changed files with 51 additions and 61 deletions

View File

@ -183,30 +183,3 @@ int cx88_i2c_init(struct cx88_core *core, struct pci_dev *pci)
return core->i2c_rc;
}
void cx88_i2c_init_ir(struct cx88_core *core)
{
/* Instantiate the IR receiver device, if present */
if (0 == core->i2c_rc) {
struct i2c_board_info info;
const unsigned short addr_list[] = {
0x18, 0x6b, 0x71,
I2C_CLIENT_END
};
memset(&info, 0, sizeof(struct i2c_board_info));
strlcpy(info.type, "ir_video", I2C_NAME_SIZE);
/* Use quick read command for probe, some IR chips don't
* support writes */
i2c_new_probed_device(&core->i2c_adap, &info, addr_list,
i2c_probe_func_quick_read);
}
}
/* ----------------------------------------------------------------------- */
/*
* Local variables:
* c-basic-offset: 8
* End:
*/

View File

@ -609,13 +609,54 @@ void cx88_ir_irq(struct cx88_core *core)
return;
}
void cx88_i2c_init_ir(struct cx88_core *core)
{
struct i2c_board_info info;
const unsigned short addr_list[] = {
0x18, 0x6b, 0x71,
I2C_CLIENT_END
};
const unsigned short *addrp;
/* Instantiate the IR receiver device, if present */
if (0 != core->i2c_rc)
return;
memset(&info, 0, sizeof(struct i2c_board_info));
strlcpy(info.type, "ir_video", I2C_NAME_SIZE);
/*
* We can't call i2c_new_probed_device() because it uses
* quick writes for probing and at least some RC receiver
* devices only reply to reads.
* Also, Hauppauge XVR needs to be specified, as address 0x71
* conflicts with another remote type used with saa7134
*/
for (addrp = addr_list; *addrp != I2C_CLIENT_END; addrp++) {
info.platform_data = NULL;
memset(&core->init_data, 0, sizeof(core->init_data));
if (*addrp == 0x71) {
/* Hauppauge XVR */
core->init_data.name = "cx88 Hauppauge XVR remote";
core->init_data.ir_codes = RC_MAP_HAUPPAUGE_NEW;
core->init_data.type = IR_TYPE_RC5;
core->init_data.internal_get_key_func = IR_KBD_GET_KEY_HAUP_XVR;
info.platform_data = &core->init_data;
}
if (i2c_smbus_xfer(&core->i2c_adap, *addrp, 0,
I2C_SMBUS_READ, 0,
I2C_SMBUS_QUICK, NULL) >= 0) {
info.addr = *addrp;
i2c_new_device(&core->i2c_adap, &info);
break;
}
}
}
/* ---------------------------------------------------------------------- */
MODULE_AUTHOR("Gerd Knorr, Pavel Machek, Chris Pascoe");
MODULE_DESCRIPTION("input driver for cx88 GPIO-based IR remote controls");
MODULE_LICENSE("GPL");
/*
* Local variables:
* c-basic-offset: 8
* End:
*/

View File

@ -31,9 +31,8 @@
#include <media/videobuf-dma-sg.h>
#include <media/v4l2-chip-ident.h>
#include <media/cx2341x.h>
#if defined(CONFIG_VIDEO_CX88_DVB) || defined(CONFIG_VIDEO_CX88_DVB_MODULE)
#include <media/videobuf-dvb.h>
#endif
#include <media/ir-kbd-i2c.h>
#include "btcx-risc.h"
#include "cx88-reg.h"
@ -377,6 +376,9 @@ struct cx88_core {
/* IR remote control state */
struct cx88_IR *ir;
/* I2C remote data */
struct IR_i2c_init_data init_data;
struct mutex lock;
/* various v4l controls */
u32 freq;
@ -650,7 +652,6 @@ extern const struct videobuf_queue_ops cx8800_vbi_qops;
/* cx88-i2c.c */
extern int cx88_i2c_init(struct cx88_core *core, struct pci_dev *pci);
extern void cx88_i2c_init_ir(struct cx88_core *core);
/* ----------------------------------------------------------- */
@ -688,6 +689,7 @@ int cx88_ir_fini(struct cx88_core *core);
void cx88_ir_irq(struct cx88_core *core);
int cx88_ir_start(struct cx88_core *core);
void cx88_ir_stop(struct cx88_core *core);
extern void cx88_i2c_init_ir(struct cx88_core *core);
/* ----------------------------------------------------------- */
/* cx88-mpeg.c */
@ -707,10 +709,3 @@ int cx88_set_freq (struct cx88_core *core,struct v4l2_frequency *f);
int cx88_get_control(struct cx88_core *core, struct v4l2_control *ctl);
int cx88_set_control(struct cx88_core *core, struct v4l2_control *ctl);
int cx88_video_mux(struct cx88_core *core, unsigned int input);
/*
* Local variables:
* c-basic-offset: 8
* End:
* kate: eol "unix"; indent-width 3; remove-trailing-space on; replace-trailing-space-save on; tab-width 8; replace-tabs off; space-indent off; mixed-indent off
*/

View File

@ -325,25 +325,6 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id)
ir_type = IR_TYPE_RC5;
ir_codes = RC_MAP_FUSIONHDTV_MCE;
break;
case 0x0b:
case 0x47:
case 0x71:
if (adap->id == I2C_HW_B_CX2388x) {
/* Handled by cx88-input */
name = "CX2388x remote";
ir_type = IR_TYPE_RC5;
ir->get_key = get_key_haup_xvr;
if (hauppauge == 1) {
ir_codes = RC_MAP_HAUPPAUGE_NEW;
} else {
ir_codes = RC_MAP_RC5_TV;
}
} else {
/* Handled by saa7134-input */
name = "SAA713x remote";
ir_type = IR_TYPE_OTHER;
}
break;
case 0x40:
name = "AVerMedia Cardbus remote";
ir->get_key = get_key_avermedia_cardbus;