korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-11-17 17:24:17 +08:00
Code Issues Packages Projects Releases Wiki Activity

dt: bindings: add new dt entry for ath10k calibration variant

Browse Source 
The bus + bmi-chip-id + bmi-board-id is not enough to identify the correct
board data file on QCA4019 based devices. Multiple different boards share
the same values. Only the original reference designs can currently be
identified and loaded from the board-2.bin. But these will not result in
the correct calibration data when combined with the pre-calibration data
from the device.

An additional "variant" information has to be provided (via SMBIOS or DT)
to select the correct board data for a design which was modified by an ODM.

Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
This commit is contained in:
Sven Eckelmann 2017-12-08 11:37:41 +01:00 committed by Kalle Valo
parent e8123bb74c
commit 40fb0eab30
1 changed files with 3 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
View File

@ -41,6 +41,9 @@ Optional properties:
- qcom,msi_addr: MSI interrupt address.
- qcom,msi_base: Base value to add before writing MSI data into
MSI address register.
- qcom,ath10k-calibration-variant: string to search for in the board-2.bin
variant list with the same bus and device
specific ids
- qcom,ath10k-calibration-data : calibration data + board specific data
as an array, the length can vary between
hw versions.