Devicetree fixes for v5.8:

- Another round of whack-a-mole removing 'allOf', redundant cases of 'maxItems' and incorrect 'reg' sizes - Fix support for yaml.h in non-standard paths -----BEGIN PGP SIGNATURE----- iQJEBAABCgAuFiEEktVUI4SxYhzZyEuo+vtdtY28YcMFAl7jpqgQHHJvYmhAa2Vy bmVsLm9yZwAKCRD6+121jbxhw9a1EACKnjbeaqqk6lFr9Ny5XSRqYzb6kJW8z6g+ jULhF0J22dbR3XTtG8fZ5en+tZx2D4bYrxaK6LC4oo++JJpVx6uijqo/S63c/x6d KpcSSicriGojdK7pDbr7CMc3oJdwDbW9ESUuVga2Dam82yHFHx0e3BRWBE2k0yat UVtRDkqKTf/AQ4U2n0QkeMRyCCE5MTq82baB9FxltNWgMgcyC8qNJDHcsphJo9IY g7kVcZgUdteb9e8O5EF5hoNmU0ybTggFCIFjuNGolOGfmPN6AcZMvrV0iwjAwHeI yE2P3SFXa0xXWM0gwOCWQkOzUBiRd8u04cm6bTJZl6JtBR7omTTb/AQ8ClFmktDB 7aXjdvOM16GSTFiuT+Cur0fDN88UkV7AHYPzX95mg0iFphTVM6jIZEsypBG9qwMS ipn64X3mrmykUqHZW1PcvJdWhFlLeeQaaGRLNDt+6Wn8ndmsPTLM4oCRtU9KVP5V NmmUEqm6ewaTw5GcE4IZ/NcrpK6KQg0q8hPAYjqtVGITcXXes+wppqKBRUNqQ0z6 EH7tEXo3gHXLLtDByprG5QUVF0DJWmrrUauaDnSC6wzBzGST681f4WFOI/Jya3Wr 9VDB4Nbd2SuTYLKkLd5uw6km1BDrHgwC/OrRXheOU4vetkddUmq6j98Pqyd/nz1q Uln338Ta+w== =eCo3 -----END PGP SIGNATURE----- Merge tag 'devicetree-fixes-for-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull Devicetree fixes from Rob Herring: - Another round of whack-a-mole removing 'allOf', redundant cases of 'maxItems' and incorrect 'reg' sizes - Fix support for yaml.h in non-standard paths * tag 'devicetree-fixes-for-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: Remove redundant 'maxItems' dt-bindings: Fix more incorrect 'reg' property sizes in examples dt-bindings: phy: qcom: Fix missing 'ranges' and example addresses dt-bindings: Remove more cases of 'allOf' containing a '$ref' scripts/dtc: use pkg-config to include <yaml.h> in non-standard path
2024-11-11 12:28:41 +08:00 · 2020-06-12 11:56:43 -07:00 · 2020-06-12 11:56:43 -07:00 · 4071b856af
commit 4071b856af
parent 7de26c41c1 8440d4a75d
51 changed files with 273 additions and 363 deletions
--- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml
+++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml
@ -85,9 +85,8 @@ properties:
      CPU power good signal from external PMIC to PMC is enabled.

  nvidia,suspend-mode:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [0, 1, 2]
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2]
    description:
      The suspend mode that the platform should use.
      Mode 0 is for LP0, CPU + Core voltage off and DRAM in self-refresh
--- a/Documentation/devicetree/bindings/ata/sata_highbank.yaml
+++ b/Documentation/devicetree/bindings/ata/sata_highbank.yaml
@ -40,28 +40,25 @@ properties:

  calxeda,led-order:
    description: Maps port numbers to offsets within the SGPIO bitstream.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
-      - minItems: 1
-        maxItems: 8
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 8

  calxeda,port-phys:
    description: |
      phandle-combophy and lane assignment, which maps each SATA port to a
      combophy and a lane within that combophy
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/phandle-array
-      - minItems: 1
-        maxItems: 8
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    minItems: 1
+    maxItems: 8

  calxeda,tx-atten:
    description: |
      Contains TX attenuation override codes, one per port.
      The upper 24 bits of each entry are always 0 and thus ignored.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
-      - minItems: 1
-        maxItems: 8
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 8

  calxeda,sgpio-gpio:
    description: |
--- a/Documentation/devicetree/bindings/bus/baikal,bt1-apb.yaml
+++ b/Documentation/devicetree/bindings/bus/baikal,bt1-apb.yaml
@ -71,8 +71,8 @@ examples:

    bus@1f059000 {
      compatible = "baikal,bt1-apb", "simple-bus";
-      reg = <0 0x1f059000 0 0x1000>,
-            <0 0x1d000000 0 0x2040000>;
+      reg = <0x1f059000 0x1000>,
+            <0x1d000000 0x2040000>;
      reg-names = "ehb", "nodev";
      #address-cells = <1>;
      #size-cells = <1>;
--- a/Documentation/devicetree/bindings/bus/baikal,bt1-axi.yaml
+++ b/Documentation/devicetree/bindings/bus/baikal,bt1-axi.yaml
@ -85,8 +85,8 @@ examples:

    bus@1f05a000 {
      compatible = "baikal,bt1-axi", "simple-bus";
-      reg = <0 0x1f05a000 0 0x1000>,
-            <0 0x1f04d110 0 0x8>;
+      reg = <0x1f05a000 0x1000>,
+            <0x1f04d110 0x8>;
      reg-names = "qos", "ehb";
      #address-cells = <1>;
      #size-cells = <1>;
--- a/Documentation/devicetree/bindings/clock/imx6q-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx6q-clock.yaml
@ -23,7 +23,6 @@ properties:
    items:
      - description: CCM interrupt request 1
      - description: CCM interrupt request 2
-    maxItems: 2

  '#clock-cells':
    const: 1
--- a/Documentation/devicetree/bindings/clock/imx6sl-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx6sl-clock.yaml
@ -23,7 +23,6 @@ properties:
    items:
      - description: CCM interrupt request 1
      - description: CCM interrupt request 2
-    maxItems: 2

  '#clock-cells':
    const: 1
--- a/Documentation/devicetree/bindings/clock/imx6sll-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx6sll-clock.yaml
@ -23,7 +23,6 @@ properties:
    items:
      - description: CCM interrupt request 1
      - description: CCM interrupt request 2
-    maxItems: 2

  '#clock-cells':
    const: 1
--- a/Documentation/devicetree/bindings/clock/imx6sx-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx6sx-clock.yaml
@ -23,7 +23,6 @@ properties:
    items:
      - description: CCM interrupt request 1
      - description: CCM interrupt request 2
-    maxItems: 2

  '#clock-cells':
    const: 1
--- a/Documentation/devicetree/bindings/clock/imx6ul-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx6ul-clock.yaml
@ -23,7 +23,6 @@ properties:
    items:
      - description: CCM interrupt request 1
      - description: CCM interrupt request 2
-    maxItems: 2

  '#clock-cells':
    const: 1
--- a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml
@ -106,8 +106,8 @@ examples:
    #include <dt-bindings/power/rk3288-power.h>
    vopb: vopb@ff930000 {
      compatible = "rockchip,rk3288-vop";
-      reg = <0x0 0xff930000 0x0 0x19c>,
-            <0x0 0xff931000 0x0 0x1000>;
+      reg = <0xff930000 0x19c>,
+            <0xff931000 0x1000>;
      interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
      clocks = <&cru ACLK_VOP0>,
               <&cru DCLK_VOP0>,
--- a/Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml
+++ b/Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml
@ -63,11 +63,10 @@ patternProperties:

      snps,nr-gpios:
        description: The number of GPIO pins exported by the port.
+        $ref: /schemas/types.yaml#/definitions/uint32
        default: 32
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
-          - minimum: 1
-            maximum: 32
+        minimum: 1
+        maximum: 32

      interrupts:
        description: |
--- a/Documentation/devicetree/bindings/iio/imu/adi,adis16475.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/adi,adis16475.yaml
@ -67,8 +67,7 @@ properties:
      1 - direct_sync
      2 - scaled_sync
      3 - pulse_sync
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32
    minimum: 0
    maximum: 3

--- a/Documentation/devicetree/bindings/iio/light/amstaos,tsl2563.yaml
+++ b/Documentation/devicetree/bindings/iio/light/amstaos,tsl2563.yaml
@ -25,9 +25,8 @@ properties:

  amstaos,cover-comp-gain:
    description: Multiplier for gain compensation
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [1, 16]
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 16]

 required:
  - compatible
--- a/Documentation/devicetree/bindings/input/iqs269a.yaml
+++ b/Documentation/devicetree/bindings/input/iqs269a.yaml
@ -40,10 +40,9 @@ properties:
      posed on channels 6 and 7 by Hall-effect sensing.

  azoteq,suspend-mode:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [0, 1, 2, 3]
-        default: 0
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+    default: 0
    description: |
      Specifies the power mode during suspend as follows:
      0: Automatic (same as normal runtime, i.e. suspend/resume disabled)
@ -56,11 +55,10 @@ properties:
    description: Divides the device's core clock by a factor of 4.

  azoteq,ulp-update:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - minimum: 0
-        maximum: 7
-        default: 3
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 7
+    default: 3
    description: Specifies the ultra-low-power mode update rate.

  azoteq,reseed-offset:
@ -70,34 +68,30 @@ properties:
      reseed events.

  azoteq,filt-str-lp-lta:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [0, 1, 2, 3]
-        default: 0
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+    default: 0
    description:
      Specifies the long-term average filter strength during low-power mode.

  azoteq,filt-str-lp-cnt:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [0, 1, 2, 3]
-        default: 0
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+    default: 0
    description:
      Specifies the raw count filter strength during low-power mode.

  azoteq,filt-str-np-lta:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [0, 1, 2, 3]
-        default: 0
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+    default: 0
    description:
      Specifies the long-term average filter strength during normal-power mode.

  azoteq,filt-str-np-cnt:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [0, 1, 2, 3]
-        default: 0
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+    default: 0
    description:
      Specifies the raw count filter strength during normal-power mode.

@ -156,11 +150,10 @@ properties:
    description: Disables all raw count filtering.

  azoteq,gpio3-select:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - minimum: 0
-        maximum: 7
-        default: 0
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 7
+    default: 0
    description:
      Selects the channel for which the GPIO3 pin represents touch state.

@ -172,10 +165,9 @@ properties:
      in either direction.

  azoteq,tx-freq:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [0, 1, 2, 3]
-        default: 0
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+    default: 0
    description: |
      Specifies the inductive sensing excitation frequency as follows (paren-
      thesized numbers represent the frequency if 'azoteq,clk-div' is present):
@ -189,10 +181,9 @@ properties:
    description: Increases the global capacitance adder from 0.5 pF to 1.5 pF.

  azoteq,reseed-select:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [0, 1, 2, 3]
-        default: 0
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+    default: 0
    description: |
      Specifies the event(s) that prompt the device to reseed (i.e. reset the
      long-term average) of an associated channel as follows:
@ -208,10 +199,9 @@ properties:
      channels.

  azoteq,filt-str-slider:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [0, 1, 2, 3]
-        default: 1
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+    default: 1
    description: Specifies the slider coordinate filter strength.

 patternProperties:
@ -246,27 +236,25 @@ patternProperties:
        description: Specifies that the channel participates in slider 1.

      azoteq,rx-enable:
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32-array
-          - minItems: 1
-            maxItems: 8
-            items:
-              minimum: 0
-              maximum: 7
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 8
+        items:
+          minimum: 0
+          maximum: 7
        description:
          Specifies the CRX pin(s) associated with the channel. By default, only
          the CRX pin corresponding to the channel's index is enabled (e.g. CRX0
          for channel 0).

      azoteq,tx-enable:
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32-array
-          - minItems: 1
-            maxItems: 8
-            items:
-              minimum: 0
-              maximum: 7
-            default: [0, 1, 2, 3, 4, 5, 6, 7]
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 8
+        items:
+          minimum: 0
+          maximum: 7
+        default: [0, 1, 2, 3, 4, 5, 6, 7]
        description: Specifies the TX pin(s) associated with the channel.

      azoteq,meas-cap-decrease:
@ -279,10 +267,9 @@ patternProperties:
        description: Floats any inactive CRX pins instead of grounding them.

      azoteq,local-cap-size:
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
-          - enum: [0, 1, 2]
-            default: 0
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2]
+        default: 0
        description: |
          Specifies the capacitance to be added to the channel as follows:
          0: None
@ -296,10 +283,9 @@ patternProperties:
          deep-touch events relative to their respective thresholds.

      azoteq,proj-bias:
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
-          - enum: [0, 1, 2, 3]
-            default: 2
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3]
+        default: 2
        description: |
          Specifies the bias current applied during projected-capacitance
          sensing as follows:
@ -309,10 +295,9 @@ patternProperties:
          3: 20 uA

      azoteq,sense-mode:
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
-          - enum: [0, 1, 9, 14, 15]
-            default: 0
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 9, 14, 15]
+        default: 0
        description: |
          Specifies the channel's sensing mode as follows:
          0:  Self capacitance
@ -322,10 +307,9 @@ patternProperties:
          15: Temperature

      azoteq,sense-freq:
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
-          - enum: [0, 1, 2, 3]
-            default: 1
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3]
+        default: 1
        description: |
          Specifies the channel's sensing frequency as follows (parenthesized
          numbers represent the frequency if 'azoteq,clk-div' is present):
@ -339,10 +323,9 @@ patternProperties:
        description: Enables the static front-end for the channel.

      azoteq,ati-mode:
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
-          - enum: [0, 1, 2, 3]
-            default: 3
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3]
+        default: 3
        description: |
          Specifies the channel's ATI mode as follows:
          0: Disabled
@ -351,39 +334,35 @@ patternProperties:
          3: Full

      azoteq,ati-base:
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
-          - enum: [75, 100, 150, 200]
-            default: 100
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [75, 100, 150, 200]
+        default: 100
        description: Specifies the channel's ATI base.

      azoteq,ati-target:
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
-          - multipleOf: 32
-            minimum: 0
-            maximum: 2016
-            default: 512
+        $ref: /schemas/types.yaml#/definitions/uint32
+        multipleOf: 32
+        minimum: 0
+        maximum: 2016
+        default: 512
        description: Specifies the channel's ATI target.

      azoteq,assoc-select:
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32-array
-          - minItems: 1
-            maxItems: 8
-            items:
-              minimum: 0
-              maximum: 7
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 8
+        items:
+          minimum: 0
+          maximum: 7
        description:
          Specifies the associated channels for which the channel serves as a
          reference channel. By default, no channels are selected.

      azoteq,assoc-weight:
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
-          - minimum: 0
-            maximum: 255
-            default: 0
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 255
+        default: 0
        description:
          Specifies the channel's impact weight if it acts as an associated
          channel (0 = 0% impact, 255 = 200% impact).
@ -411,11 +390,10 @@ patternProperties:

        properties:
          azoteq,thresh:
-            allOf:
-              - $ref: /schemas/types.yaml#/definitions/uint32
-              - minimum: 0
-                maximum: 255
-                default: 10
+            $ref: /schemas/types.yaml#/definitions/uint32
+            minimum: 0
+            maximum: 255
+            default: 10
            description: Specifies the threshold for the event.

          linux,code:
@ -430,19 +408,17 @@ patternProperties:

        properties:
          azoteq,thresh:
-            allOf:
-              - $ref: /schemas/types.yaml#/definitions/uint32
-              - minimum: 0
-                maximum: 255
-                default: 8
+            $ref: /schemas/types.yaml#/definitions/uint32
+            minimum: 0
+            maximum: 255
+            default: 8
            description: Specifies the threshold for the event.

          azoteq,hyst:
-            allOf:
-              - $ref: /schemas/types.yaml#/definitions/uint32
-              - minimum: 0
-                maximum: 15
-                default: 4
+            $ref: /schemas/types.yaml#/definitions/uint32
+            minimum: 0
+            maximum: 15
+            default: 4
            description: Specifies the hysteresis for the event.

          linux,code:
@ -457,19 +433,17 @@ patternProperties:

        properties:
          azoteq,thresh:
-            allOf:
-              - $ref: /schemas/types.yaml#/definitions/uint32
-              - minimum: 0
-                maximum: 255
-                default: 26
+            $ref: /schemas/types.yaml#/definitions/uint32
+            minimum: 0
+            maximum: 255
+            default: 26
            description: Specifies the threshold for the event.

          azoteq,hyst:
-            allOf:
-              - $ref: /schemas/types.yaml#/definitions/uint32
-              - minimum: 0
-                maximum: 15
-                default: 0
+            $ref: /schemas/types.yaml#/definitions/uint32
+            minimum: 0
+            maximum: 15
+            default: 0
            description: Specifies the hysteresis for the event.

          linux,code:
--- a/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-msi.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-msi.yaml
@ -25,19 +25,17 @@ properties:
    description:
      u32 value of the base of parent HyperTransport vector allocated
      to PCH MSI.
-    allOf:
-      - $ref: "/schemas/types.yaml#/definitions/uint32"
-      - minimum: 0
-        maximum: 255
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 255

  loongson,msi-num-vecs:
    description:
      u32 value of the number of parent HyperTransport vectors allocated
      to PCH MSI.
-    allOf:
-      - $ref: "/schemas/types.yaml#/definitions/uint32"
-      - minimum: 1
-        maximum: 256
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 1
+    maximum: 256

  msi-controller: true

--- a/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-pic.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-pic.yaml
@ -25,10 +25,9 @@ properties:
    description:
      u32 value of the base of parent HyperTransport vector allocated
      to PCH PIC.
-    allOf:
-      - $ref: "/schemas/types.yaml#/definitions/uint32"
-      - minimum: 0
-        maximum: 192
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 192

  interrupt-controller: true

--- a/Documentation/devicetree/bindings/ipmi/ipmi-smic.yaml
+++ b/Documentation/devicetree/bindings/ipmi/ipmi-smic.yaml
@ -31,9 +31,8 @@ properties:

  reg-size:
    description: The access width of the register in bytes. Defaults to 1.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [1, 2, 4, 8]
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2, 4, 8]

  reg-spacing:
    $ref: /schemas/types.yaml#/definitions/uint32
@ -43,9 +42,8 @@ properties:
    description: |
      The amount of bits to shift the register content to the right to get
      the data into bit zero.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - maximum: 56
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 56

 required:
  - compatible
--- a/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml
+++ b/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml
@ -57,8 +57,7 @@ properties:
    description: |
      mA; per-string current limit.
      This property is supported only for WLED3.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32
    default: 20
    minimum: 0
    maximum: 25
@ -74,38 +73,33 @@ properties:
  qcom,current-boost-limit:
    description: |
      mA; boost current limit.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32

  qcom,switching-freq:
    description: |
      kHz; switching frequency.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [ 600, 640, 685, 738, 800, 872, 960, 1066, 1200, 1371, 1600, 1920, 2400, 3200, 4800, 9600 ]
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 600, 640, 685, 738, 800, 872, 960, 1066, 1200, 1371, 1600, 1920, 2400, 3200, 4800, 9600 ]

  qcom,ovp:
    description: |
      V; Over-voltage protection limit.
      This property is supported only for WLED3.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [ 27, 29, 32, 35 ]
-      - default: 29
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 27, 29, 32, 35 ]
+    default: 29

  qcom,ovp-millivolt:
    description: |
      Over-voltage protection limit. This property is for WLED4 only.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [ 18100, 19600, 29600, 31100 ]
-      - default: 29600
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 18100, 19600, 29600, 31100 ]
+    default: 29600

  qcom,num-strings:
    description: |
      number of led strings attached.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32

  qcom,enabled-strings:
    description: |
@ -113,8 +107,7 @@ properties:
      string of leds are operated individually. Specify the
      list of strings used by the device. Any combination of
      led strings can be used.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
+    $ref: /schemas/types.yaml#/definitions/uint32-array
    minItems: 1
    maxItems: 4

@ -150,10 +143,9 @@ properties:
           0 - Modulator A
           1 - Modulator B
      This property is applicable only to WLED5 peripheral.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [ 0, 1 ]
-      - default: 0
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1 ]
+    default: 0

  qcom,cabc-sel:
    description: |
@ -164,9 +156,8 @@ properties:
           2 - CABC 2
           3 - External signal (e.g. LPG) is used for dimming
      This property is applicable only to WLED5 peripheral.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [ 0, 1, 2, 3 ]
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1, 2, 3 ]

 allOf:
  - if:
--- a/Documentation/devicetree/bindings/leds/leds-aw2013.yaml
+++ b/Documentation/devicetree/bindings/leds/leds-aw2013.yaml
@ -32,8 +32,7 @@ properties:
 patternProperties:
  "^led@[0-2]$":
    type: object
-    allOf:
-      - $ref: common.yaml#
+    $ref: common.yaml#

    properties:
      reg:
--- a/Documentation/devicetree/bindings/leds/leds-sgm3140.yaml
+++ b/Documentation/devicetree/bindings/leds/leds-sgm3140.yaml
@ -33,8 +33,7 @@ properties:

  led:
    type: object
-    allOf:
-      - $ref: common.yaml#
+    $ref: common.yaml#

 required:
  - compatible
--- a/Documentation/devicetree/bindings/mailbox/sprd-mailbox.yaml
+++ b/Documentation/devicetree/bindings/mailbox/sprd-mailbox.yaml
@ -51,7 +51,7 @@ examples:
    #include <dt-bindings/interrupt-controller/arm-gic.h>
    mailbox: mailbox@400a0000 {
      compatible = "sprd,sc9860-mailbox";
-      reg = <0 0x400a0000 0 0x8000>, <0 0x400a8000 0 0x8000>;
+      reg = <0x400a0000 0x8000>, <0x400a8000 0x8000>;
      #mbox-cells = <1>;
      clock-names = "enable";
      clocks = <&aon_gate 53>;
--- a/Documentation/devicetree/bindings/media/i2c/ov8856.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/ov8856.yaml
@ -79,8 +79,7 @@ properties:
              - const: 4

          link-frequencies:
-            allOf:
-              - $ref: /schemas/types.yaml#/definitions/uint64-array
+            $ref: /schemas/types.yaml#/definitions/uint64-array
            description:
              Allowed data bus frequencies. 360000000, 180000000 Hz or both
              are supported by the driver.
--- a/Documentation/devicetree/bindings/media/rockchip,vdec.yaml
+++ b/Documentation/devicetree/bindings/media/rockchip,vdec.yaml
@ -61,7 +61,7 @@ examples:

    vdec: video-codec@ff660000 {
        compatible = "rockchip,rk3399-vdec";
-        reg = <0x0 0xff660000 0x0 0x400>;
+        reg = <0xff660000 0x400>;
        interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH 0>;
        clocks = <&cru ACLK_VDU>, <&cru HCLK_VDU>,
                 <&cru SCLK_VDU_CA>, <&cru SCLK_VDU_CORE>;
--- a/Documentation/devicetree/bindings/media/rockchip-vpu.yaml
+++ b/Documentation/devicetree/bindings/media/rockchip-vpu.yaml
@ -66,7 +66,7 @@ examples:

        vpu: video-codec@ff9a0000 {
                compatible = "rockchip,rk3288-vpu";
-                reg = <0x0 0xff9a0000 0x0 0x800>;
+                reg = <0xff9a0000 0x800>;
                interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
                             <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
                interrupt-names = "vepu", "vdpu";
--- a/Documentation/devicetree/bindings/memory-controllers/ingenic,nemc.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/ingenic,nemc.yaml
@ -45,9 +45,8 @@ patternProperties:
        maxItems: 255

      ingenic,nemc-bus-width:
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
-          - enum: [8, 16]
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [8, 16]
        description: Specifies the bus width in bits.

      ingenic,nemc-tAS:
--- a/Documentation/devicetree/bindings/mtd/arasan,nand-controller.yaml
+++ b/Documentation/devicetree/bindings/mtd/arasan,nand-controller.yaml
@ -53,7 +53,7 @@ examples:
  - |
    nfc: nand-controller@ff100000 {
        compatible = "xlnx,zynqmp-nand-controller", "arasan,nfc-v3p10";
-        reg = <0x0 0xff100000 0x0 0x1000>;
+        reg = <0xff100000 0x1000>;
        clock-names = "controller", "bus";
        clocks = <&clk200>, <&clk100>;
        interrupt-parent = <&gic>;
--- a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml
+++ b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml
@ -145,8 +145,7 @@ patternProperties:

  "^cpts@[0-9a-f]+":
    type: object
-    allOf:
-      - $ref: "ti,k3-am654-cpts.yaml#"
+    $ref: "ti,k3-am654-cpts.yaml#"
    description:
      CPSW Common Platform Time Sync (CPTS) module.

--- a/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml
+++ b/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml
@ -74,15 +74,13 @@ properties:
      - const: cpts

  ti,cpts-ext-ts-inputs:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32
    maximum: 8
    description:
      Number of hardware timestamp push inputs (HWx_TS_PUSH)

  ti,cpts-periodic-outputs:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32
    maximum: 8
    description:
      Number of timestamp Generator function outputs (TS_GENFx)
@ -123,7 +121,7 @@ examples:

    cpts@310d0000 {
         compatible = "ti,am65-cpts";
-         reg = <0x0 0x310d0000 0x0 0x400>;
+         reg = <0x310d0000 0x400>;
         reg-names = "cpts";
         clocks = <&main_cpts_mux>;
         clock-names = "cpts";
--- a/Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml
+++ b/Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml
@ -15,8 +15,7 @@ allOf:
 properties:
  cdns,max-outbound-regions:
    description: maximum number of outbound regions
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32
    minimum: 1
    maximum: 32
    default: 32
--- a/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml
+++ b/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml
@ -16,8 +16,7 @@ allOf:
 properties:
  cdns,max-outbound-regions:
    description: maximum number of outbound regions
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32
    minimum: 1
    maximum: 32
    default: 32
--- a/Documentation/devicetree/bindings/phy/calxeda-combophy.yaml
+++ b/Documentation/devicetree/bindings/phy/calxeda-combophy.yaml
@ -29,9 +29,8 @@ properties:

  phydev:
    description: device ID for programming the ComboPHY.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - maximum: 31
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 31

 required:
  - compatible
--- a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
@ -44,6 +44,8 @@ properties:
  "#size-cells":
    enum: [ 1, 2 ]

+  ranges: true
+
  clocks:
    minItems: 1
    maxItems: 4
@ -87,6 +89,7 @@ required:
  - "#clock-cells"
  - "#address-cells"
  - "#size-cells"
+  - ranges
  - clocks
  - clock-names
  - resets
@ -281,10 +284,11 @@ examples:
    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
    usb_2_qmpphy: phy-wrapper@88eb000 {
        compatible = "qcom,sdm845-qmp-usb3-uni-phy";
-        reg = <0 0x088eb000 0 0x18c>;
+        reg = <0x088eb000 0x18c>;
        #clock-cells = <1>;
-        #address-cells = <2>;
-        #size-cells = <2>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0x0 0x088eb000 0x2000>;

        clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK >,
                 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
@ -299,11 +303,11 @@ examples:
        vdda-phy-supply = <&vdda_usb2_ss_1p2>;
        vdda-pll-supply = <&vdda_usb2_ss_core>;

-        usb_2_ssphy: phy@88eb200 {
-                reg = <0 0x088eb200 0 0x128>,
-                      <0 0x088eb400 0 0x1fc>,
-                      <0 0x088eb800 0 0x218>,
-                      <0 0x088eb600 0 0x70>;
+        usb_2_ssphy: phy@200 {
+                reg = <0x200 0x128>,
+                      <0x400 0x1fc>,
+                      <0x800 0x218>,
+                      <0x600 0x70>;
                #clock-cells = <0>;
                #phy-cells = <0>;
                clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
--- a/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml
@ -34,6 +34,8 @@ properties:
  "#size-cells":
    enum: [ 1, 2 ]

+  ranges: true
+
  clocks:
    items:
      - description: Phy aux clock.
@ -86,6 +88,7 @@ required:
  - "#clock-cells"
  - "#address-cells"
  - "#size-cells"
+  - ranges
  - clocks
  - clock-names
  - resets
@ -100,12 +103,13 @@ examples:
    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
    usb_1_qmpphy: phy-wrapper@88e9000 {
        compatible = "qcom,sdm845-qmp-usb3-phy";
-        reg = <0 0x088e9000 0 0x18c>,
-              <0 0x088e8000 0 0x10>;
+        reg = <0x088e9000 0x18c>,
+              <0x088e8000 0x10>;
        reg-names = "reg-base", "dp_com";
        #clock-cells = <1>;
-        #address-cells = <2>;
-        #size-cells = <2>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0x0 0x088e9000 0x1000>;

        clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
                 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
@ -120,17 +124,17 @@ examples:
        vdda-phy-supply = <&vdda_usb2_ss_1p2>;
        vdda-pll-supply = <&vdda_usb2_ss_core>;

-        usb_1_ssphy: phy@88e9200 {
-                reg = <0 0x088e9200 0 0x128>,
-                      <0 0x088e9400 0 0x200>,
-                      <0 0x088e9c00 0 0x218>,
-                      <0 0x088e9600 0 0x128>,
-                      <0 0x088e9800 0 0x200>,
-                      <0 0x088e9a00 0 0x100>;
-                #clock-cells = <0>;
-                #phy-cells = <0>;
-                clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
-                clock-names = "pipe0";
-                clock-output-names = "usb3_phy_pipe_clk_src";
-            };
+        phy@200 {
+            reg = <0x200 0x128>,
+                  <0x400 0x200>,
+                  <0xc00 0x218>,
+                  <0x600 0x128>,
+                  <0x800 0x200>,
+                  <0xa00 0x100>;
+            #clock-cells = <0>;
+            #phy-cells = <0>;
+            clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+            clock-names = "pipe0";
+            clock-output-names = "usb3_phy_pipe_clk_src";
        };
+    };
--- a/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml
@ -65,7 +65,7 @@ examples:
    #include <dt-bindings/clock/qcom,gcc-sm8150.h>
    phy@88e2000 {
        compatible = "qcom,sm8150-usb-hs-phy";
-        reg = <0 0x088e2000 0 0x400>;
+        reg = <0x088e2000 0x400>;
        #phy-cells = <0>;

        clocks = <&rpmhcc RPMH_CXO_CLK>;
--- a/Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml
@ -52,9 +52,8 @@ properties:
    description: |
      Enable/disable spread spectrum clock (ssc). 0 or the property doesn't
      exist means disabling the ssc. The actual value will be -<value> ppm.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [ 0, 4003, 4492, 4980 ]
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 4003, 4492, 4980 ]

 required:
  - compatible
--- a/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml
+++ b/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml
@ -27,11 +27,9 @@ properties:
      of this binary blob is kept secret by CellWise. The only way to obtain
      it is to mail two batteries to a test facility of CellWise and receive
      back a test report with the binary blob.
-    allOf:
-      - $ref: /schemas/types.yaml#definitions/uint8-array
-    items:
-      - minItems: 64
-        maxItems: 64
+    $ref: /schemas/types.yaml#definitions/uint8-array
+    minItems: 64
+    maxItems: 64

  cellwise,monitor-interval-ms:
    description:
@ -41,10 +39,9 @@ properties:
  power-supplies:
    description:
      Specifies supplies used for charging the battery connected to this gauge
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/phandle-array
-      - minItems: 1
-        maxItems: 8 # Should be enough
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    minItems: 1
+    maxItems: 8 # Should be enough

  monitored-battery:
    description:
--- a/Documentation/devicetree/bindings/power/supply/sbs,sbs-battery.yaml
+++ b/Documentation/devicetree/bindings/power/supply/sbs,sbs-battery.yaml
@ -32,16 +32,14 @@ properties:
    description:
      The number of times to retry I2C transactions on I2C IO failure.
    default: 0
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32

  sbs,poll-retry-count:
    description:
      The number of times to try looking for new status after an external
      change notification.
    default: 0
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32

  sbs,battery-detect-gpios:
    description:
--- a/Documentation/devicetree/bindings/pwm/imx-pwm.yaml
+++ b/Documentation/devicetree/bindings/pwm/imx-pwm.yaml
@ -30,13 +30,11 @@ properties:
    items:
      - description: SoC PWM ipg clock
      - description: SoC PWM per clock
-    maxItems: 2

  clock-names:
    items:
      - const: ipg
      - const: per
-    maxItems: 2

  interrupts:
    maxItems: 1
--- a/Documentation/devicetree/bindings/regulator/maxim,max77826.yaml
+++ b/Documentation/devicetree/bindings/regulator/maxim,max77826.yaml
@ -21,8 +21,7 @@ properties:

  regulators:
    type: object
-    allOf:
-      - $ref: regulator.yaml#
+    $ref: regulator.yaml#
    description: |
      list of regulators provided by this controller, must be named
      after their hardware counterparts LDO[1-15], BUCK and BUCKBOOST
@ -30,13 +29,11 @@ properties:
    patternProperties:
      "^LDO([1-9]|1[0-5])$":
        type: object
-        allOf:
-          - $ref: regulator.yaml#
+        $ref: regulator.yaml#

      "^BUCK|BUCKBOOST$":
        type: object
-        allOf:
-          - $ref: regulator.yaml#
+        $ref: regulator.yaml#

    additionalProperties: false

--- a/Documentation/devicetree/bindings/regulator/rohm,bd71847-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/rohm,bd71847-regulator.yaml
@ -29,8 +29,7 @@ description: |
 patternProperties:
  "^LDO[1-6]$":
    type: object
-    allOf:
-      - $ref: regulator.yaml#
+    $ref: regulator.yaml#
    description:
      Properties for single LDO regulator.

@ -44,8 +43,7 @@ patternProperties:

  "^BUCK[1-6]$":
    type: object
-    allOf:
-      - $ref: regulator.yaml#
+    $ref: regulator.yaml#
    description:
      Properties for single BUCK regulator.

@ -56,28 +54,25 @@ patternProperties:
          should be "buck1", ..., "buck6"

      rohm,dvs-run-voltage:
-        allOf:
-          - $ref: "/schemas/types.yaml#/definitions/uint32"
-          - minimum: 0
-            maximum: 1300000
+        $ref: "/schemas/types.yaml#/definitions/uint32"
+        minimum: 0
+        maximum: 1300000
        description:
          PMIC default "RUN" state voltage in uV. See below table for
          bucks which support this. 0 means disabled.

      rohm,dvs-idle-voltage:
-        allOf:
-          - $ref: "/schemas/types.yaml#/definitions/uint32"
-          - minimum: 0
-            maximum: 1300000
+        $ref: "/schemas/types.yaml#/definitions/uint32"
+        minimum: 0
+        maximum: 1300000
        description:
          PMIC default "IDLE" state voltage in uV. See below table for
          bucks which support this. 0 means disabled.

      rohm,dvs-suspend-voltage:
-        allOf:
-          - $ref: "/schemas/types.yaml#/definitions/uint32"
-          - minimum: 0
-            maximum: 1300000
+        $ref: "/schemas/types.yaml#/definitions/uint32"
+        minimum: 0
+        maximum: 1300000
        description:
          PMIC default "SUSPEND" state voltage in uV. See below table for
          bucks which support this. 0 means disabled.
--- a/Documentation/devicetree/bindings/rng/arm-cctrng.yaml
+++ b/Documentation/devicetree/bindings/rng/arm-cctrng.yaml
@ -28,10 +28,8 @@ properties:
    description:
      Arm TrustZone CryptoCell TRNG engine has 4 ring oscillators.
      Sampling ratio values for these 4 ring oscillators. (from calibration)
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
-      - items:
-          maxItems: 4
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    maxItems: 4

  clocks:
    maxItems: 1
--- a/Documentation/devicetree/bindings/serial/samsung_uart.yaml
+++ b/Documentation/devicetree/bindings/serial/samsung_uart.yaml
@ -33,9 +33,8 @@ properties:
    description: |
      The size (in bytes) of the IO accesses that should be performed
      on the device.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [ 1, 4 ]
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 1, 4 ]

  clocks:
    minItems: 2
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml
@ -100,8 +100,7 @@ patternProperties:
                 supports up to 50MHz, up to four chip selects, programmable
                 data path from 4 bits to 32 bits and numerous protocol
                 variants.
-    allOf:
-      - $ref: /spi/spi-controller.yaml#
+    $ref: /spi/spi-controller.yaml#

    properties:
      compatible:
@ -126,8 +125,7 @@ patternProperties:
  "i2c@[0-9a-f]+$":
    type: object
    description: GENI serial engine based I2C controller.
-    allOf:
-      - $ref: /schemas/i2c/i2c-controller.yaml#
+    $ref: /schemas/i2c/i2c-controller.yaml#

    properties:
      compatible:
@ -156,8 +154,7 @@ patternProperties:
  "serial@[0-9a-f]+$":
    type: object
    description: GENI Serial Engine based UART Controller.
-    allOf:
-      - $ref: /schemas/serial.yaml#
+    $ref: /schemas/serial.yaml#

    properties:
      compatible:
--- a/Documentation/devicetree/bindings/sound/fsl,easrc.yaml
+++ b/Documentation/devicetree/bindings/sound/fsl,easrc.yaml
@ -45,23 +45,20 @@ properties:
      - const: ctx3_tx

  firmware-name:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/string
-      - const: imx/easrc/easrc-imx8mn.bin
+    $ref: /schemas/types.yaml#/definitions/string
+    const: imx/easrc/easrc-imx8mn.bin
    description: The coefficient table for the filters

  fsl,asrc-rate:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - minimum: 8000
-      - maximum: 192000
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 8000
+    maximum: 192000
    description: Defines a mutual sample rate used by DPCM Back Ends

  fsl,asrc-format:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [2, 6, 10, 32, 36]
-        default: 2
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [2, 6, 10, 32, 36]
+    default: 2
    description:
      Defines a mutual sample format used by DPCM Back Ends

@ -83,7 +80,7 @@ examples:

    easrc: easrc@300c0000 {
           compatible = "fsl,imx8mn-easrc";
-           reg = <0x0 0x300c0000 0x0 0x10000>;
+           reg = <0x300c0000 0x10000>;
           interrupts = <0x0 122 0x4>;
           clocks = <&clk IMX8MN_CLK_ASRC_ROOT>;
           clock-names = "mem";
--- a/Documentation/devicetree/bindings/sound/simple-card.yaml
+++ b/Documentation/devicetree/bindings/sound/simple-card.yaml
@ -13,15 +13,13 @@ definitions:

  frame-master:
    description: Indicates dai-link frame master.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/phandle-array
-      - maxItems: 1
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1

  bitclock-master:
    description: Indicates dai-link bit clock master
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/phandle-array
-      - maxItems: 1
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1

  frame-inversion:
    description: dai-link uses frame clock inversion
--- a/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml
+++ b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml
@ -76,13 +76,12 @@ properties:
       PDMIN3 - PDMCLK latching edge used for channel 5 and 6 data
       PDMIN4 - PDMCLK latching edge used for channel 7 and 8 data

-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
-      - minItems: 1
-        maxItems: 4
-        items:
-          maximum: 1
-        default: [0, 0, 0, 0]
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 4
+    items:
+      maximum: 1
+    default: [0, 0, 0, 0]

  ti,gpi-config:
    description: |
@ -102,13 +101,12 @@ properties:
       7 - GPIX is configured as a PDM data input for channel 7 and channel
            (PDMDIN4)

-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
-      - minItems: 1
-        maxItems: 4
-        items:
-          maximum: 7
-        default: [0, 0, 0, 0]
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 4
+    items:
+      maximum: 7
+    default: [0, 0, 0, 0]

 required:
  - compatible
--- a/Documentation/devicetree/bindings/thermal/socionext,uniphier-thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/socionext,uniphier-thermal.yaml
@ -28,9 +28,8 @@ properties:
    const: 0

  socionext,tmod-calibration:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
-      - maxItems: 2
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    maxItems: 2
    description:
      A pair of calibrated values referred from PVT, in case that the values
      aren't set on SoC, like a reference board.
--- a/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml
+++ b/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml
@ -52,21 +52,18 @@ properties:

  vhub-vendor-id:
    description: vhub Vendor ID
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - maximum: 65535
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 65535

  vhub-product-id:
    description: vhub Product ID
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - maximum: 65535
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 65535

  vhub-device-revision:
    description: vhub Device Revision in binary-coded decimal
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - maximum: 65535
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 65535

  vhub-strings:
    type: object
@ -90,18 +87,15 @@ properties:

          manufacturer:
            description: vhub manufacturer
-            allOf:
-              - $ref: /schemas/types.yaml#/definitions/string
+            $ref: /schemas/types.yaml#/definitions/string

          product:
            description: vhub product name
-            allOf:
-              - $ref: /schemas/types.yaml#/definitions/string
+            $ref: /schemas/types.yaml#/definitions/string

          serial-number:
            description: vhub device serial number
-            allOf:
-              - $ref: /schemas/types.yaml#/definitions/string
+            $ref: /schemas/types.yaml#/definitions/string

 required:
  - compatible
--- a/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml
+++ b/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml
@ -64,13 +64,11 @@ properties:
     - const: hs_src

  power-domains:
-    maxItems: 2
    items:
      - description: XUSBB(device) power-domain
      - description: XUSBA(superspeed) power-domain

  power-domain-names:
-    maxItems: 2
    items:
      - const: dev
      - const: ss
--- a/Documentation/devicetree/bindings/watchdog/arm-smc-wdt.yaml
+++ b/Documentation/devicetree/bindings/watchdog/arm-smc-wdt.yaml
@ -17,8 +17,7 @@ properties:
    enum:
      - arm,smc-wdt
  arm,smc-id:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32
    description: |
      The ATF smc function id used by the firmware.
      Defaults to 0x82003D06 if unset.
--- a/scripts/dtc/Makefile
+++ b/scripts/dtc/Makefile
@ -20,6 +20,9 @@ endif
 HOST_EXTRACFLAGS += -DNO_YAML
 else
 dtc-objs	+= yamltree.o
+# To include <yaml.h> installed in a non-default path
+HOSTCFLAGS_yamltree.o := $(shell pkg-config --cflags yaml-0.1)
+# To link libyaml installed in a non-default path
 HOSTLDLIBS_dtc	:= $(shell pkg-config yaml-0.1 --libs)
 endif