From de10ac47597e7a3596b27631d0d5ce5f48d2c099 Mon Sep 17 00:00:00 2001
From: Remi Pommarel <repk@triplefau.lt>
Date: Sun, 1 Sep 2019 12:54:10 +0200
Subject: [PATCH 01/18] iio: adc: meson_saradc: Fix memory allocation order

meson_saradc's irq handler uses priv->regmap so make sure that it is
allocated before the irq get enabled.

This also fixes crash when CONFIG_DEBUG_SHIRQ is enabled, as device
managed resources are freed in the inverted order they had been
allocated, priv->regmap was freed before the spurious fake irq that
CONFIG_DEBUG_SHIRQ adds called the handler.

Fixes: 3af109131b7eb8 ("iio: adc: meson-saradc: switch from polling to interrupt mode")
Reported-by: Elie Roudninski <xademax@gmail.com>
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Tested-by: Elie ROUDNINSKI <xademax@gmail.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 drivers/iio/adc/meson_saradc.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/iio/adc/meson_saradc.c b/drivers/iio/adc/meson_saradc.c
index 7b28d045d271..7b27306330a3 100644
--- a/drivers/iio/adc/meson_saradc.c
+++ b/drivers/iio/adc/meson_saradc.c
@@ -1219,6 +1219,11 @@ static int meson_sar_adc_probe(struct platform_device *pdev)
 	if (IS_ERR(base))
 		return PTR_ERR(base);
 
+	priv->regmap = devm_regmap_init_mmio(&pdev->dev, base,
+					     priv->param->regmap_config);
+	if (IS_ERR(priv->regmap))
+		return PTR_ERR(priv->regmap);
+
 	irq = irq_of_parse_and_map(pdev->dev.of_node, 0);
 	if (!irq)
 		return -EINVAL;
@@ -1228,11 +1233,6 @@ static int meson_sar_adc_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-	priv->regmap = devm_regmap_init_mmio(&pdev->dev, base,
-					     priv->param->regmap_config);
-	if (IS_ERR(priv->regmap))
-		return PTR_ERR(priv->regmap);
-
 	priv->clkin = devm_clk_get(&pdev->dev, "clkin");
 	if (IS_ERR(priv->clkin)) {
 		dev_err(&pdev->dev, "failed to get clkin\n");

From 85ae3aeedeccb6febb0c6f9d5346d9c6419ad925 Mon Sep 17 00:00:00 2001
From: Lorenzo Bianconi <lorenzo@kernel.org>
Date: Sat, 31 Aug 2019 13:18:22 +0200
Subject: [PATCH 02/18] iio: imu: st_lsm6dsx: forbid 0 sensor sensitivity

Do not allow configuring null sensor gain since it will force to 0
device outputs

Fixes: c8d4066c7246 ("iio: imu: st_lsm6dsx: remove invalid gain value for LSM9DS1")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h      |  2 ++
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 28 +++++++++++++-------
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c | 11 +++-----
 3 files changed, 25 insertions(+), 16 deletions(-)

diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
index 80e42c7dbcbe..0fe6999b8257 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
@@ -99,7 +99,9 @@ struct st_lsm6dsx_fs {
 #define ST_LSM6DSX_FS_LIST_SIZE		4
 struct st_lsm6dsx_fs_table_entry {
 	struct st_lsm6dsx_reg reg;
+
 	struct st_lsm6dsx_fs fs_avl[ST_LSM6DSX_FS_LIST_SIZE];
+	int fs_len;
 };
 
 /**
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
index 2d3495560136..fd5ebe1e1594 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
@@ -145,6 +145,7 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 				.fs_avl[1] = { IIO_G_TO_M_S_2(122), 0x2 },
 				.fs_avl[2] = { IIO_G_TO_M_S_2(244), 0x3 },
 				.fs_avl[3] = { IIO_G_TO_M_S_2(732), 0x1 },
+				.fs_len = 4,
 			},
 			[ST_LSM6DSX_ID_GYRO] = {
 				.reg = {
@@ -154,6 +155,7 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 				.fs_avl[0] = {  IIO_DEGREE_TO_RAD(245), 0x0 },
 				.fs_avl[1] = {  IIO_DEGREE_TO_RAD(500), 0x1 },
 				.fs_avl[2] = { IIO_DEGREE_TO_RAD(2000), 0x3 },
+				.fs_len = 3,
 			},
 		},
 	},
@@ -215,6 +217,7 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 				.fs_avl[1] = { IIO_G_TO_M_S_2(122), 0x2 },
 				.fs_avl[2] = { IIO_G_TO_M_S_2(244), 0x3 },
 				.fs_avl[3] = { IIO_G_TO_M_S_2(488), 0x1 },
+				.fs_len = 4,
 			},
 			[ST_LSM6DSX_ID_GYRO] = {
 				.reg = {
@@ -225,6 +228,7 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 				.fs_avl[1] = { IIO_DEGREE_TO_RAD(17500), 0x1 },
 				.fs_avl[2] = { IIO_DEGREE_TO_RAD(35000), 0x2 },
 				.fs_avl[3] = { IIO_DEGREE_TO_RAD(70000), 0x3 },
+				.fs_len = 4,
 			},
 		},
 		.decimator = {
@@ -327,6 +331,7 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 				.fs_avl[1] = { IIO_G_TO_M_S_2(122), 0x2 },
 				.fs_avl[2] = { IIO_G_TO_M_S_2(244), 0x3 },
 				.fs_avl[3] = { IIO_G_TO_M_S_2(488), 0x1 },
+				.fs_len = 4,
 			},
 			[ST_LSM6DSX_ID_GYRO] = {
 				.reg = {
@@ -337,6 +342,7 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 				.fs_avl[1] = { IIO_DEGREE_TO_RAD(17500), 0x1 },
 				.fs_avl[2] = { IIO_DEGREE_TO_RAD(35000), 0x2 },
 				.fs_avl[3] = { IIO_DEGREE_TO_RAD(70000), 0x3 },
+				.fs_len = 4,
 			},
 		},
 		.decimator = {
@@ -448,6 +454,7 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 				.fs_avl[1] = { IIO_G_TO_M_S_2(122), 0x2 },
 				.fs_avl[2] = { IIO_G_TO_M_S_2(244), 0x3 },
 				.fs_avl[3] = { IIO_G_TO_M_S_2(488), 0x1 },
+				.fs_len = 4,
 			},
 			[ST_LSM6DSX_ID_GYRO] = {
 				.reg = {
@@ -458,6 +465,7 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 				.fs_avl[1] = { IIO_DEGREE_TO_RAD(17500), 0x1 },
 				.fs_avl[2] = { IIO_DEGREE_TO_RAD(35000), 0x2 },
 				.fs_avl[3] = { IIO_DEGREE_TO_RAD(70000), 0x3 },
+				.fs_len = 4,
 			},
 		},
 		.decimator = {
@@ -563,6 +571,7 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 				.fs_avl[1] = { IIO_G_TO_M_S_2(122), 0x2 },
 				.fs_avl[2] = { IIO_G_TO_M_S_2(244), 0x3 },
 				.fs_avl[3] = { IIO_G_TO_M_S_2(488), 0x1 },
+				.fs_len = 4,
 			},
 			[ST_LSM6DSX_ID_GYRO] = {
 				.reg = {
@@ -573,6 +582,7 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 				.fs_avl[1] = { IIO_DEGREE_TO_RAD(17500), 0x1 },
 				.fs_avl[2] = { IIO_DEGREE_TO_RAD(35000), 0x2 },
 				.fs_avl[3] = { IIO_DEGREE_TO_RAD(70000), 0x3 },
+				.fs_len = 4,
 			},
 		},
 		.batch = {
@@ -693,6 +703,7 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 				.fs_avl[1] = { IIO_G_TO_M_S_2(122), 0x2 },
 				.fs_avl[2] = { IIO_G_TO_M_S_2(244), 0x3 },
 				.fs_avl[3] = { IIO_G_TO_M_S_2(488), 0x1 },
+				.fs_len = 4,
 			},
 			[ST_LSM6DSX_ID_GYRO] = {
 				.reg = {
@@ -703,6 +714,7 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 				.fs_avl[1] = { IIO_DEGREE_TO_RAD(17500), 0x1 },
 				.fs_avl[2] = { IIO_DEGREE_TO_RAD(35000), 0x2 },
 				.fs_avl[3] = { IIO_DEGREE_TO_RAD(70000), 0x3 },
+				.fs_len = 4,
 			},
 		},
 		.batch = {
@@ -800,6 +812,7 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 				.fs_avl[1] = { IIO_G_TO_M_S_2(122), 0x2 },
 				.fs_avl[2] = { IIO_G_TO_M_S_2(244), 0x3 },
 				.fs_avl[3] = { IIO_G_TO_M_S_2(488), 0x1 },
+				.fs_len = 4,
 			},
 			[ST_LSM6DSX_ID_GYRO] = {
 				.reg = {
@@ -810,6 +823,7 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 				.fs_avl[1] = { IIO_DEGREE_TO_RAD(17500), 0x1 },
 				.fs_avl[2] = { IIO_DEGREE_TO_RAD(35000), 0x2 },
 				.fs_avl[3] = { IIO_DEGREE_TO_RAD(70000), 0x3 },
+				.fs_len = 4,
 			},
 		},
 		.batch = {
@@ -933,11 +947,12 @@ static int st_lsm6dsx_set_full_scale(struct st_lsm6dsx_sensor *sensor,
 	int i, err;
 
 	fs_table = &sensor->hw->settings->fs_table[sensor->id];
-	for (i = 0; i < ST_LSM6DSX_FS_LIST_SIZE; i++)
+	for (i = 0; i < fs_table->fs_len; i++) {
 		if (fs_table->fs_avl[i].gain == gain)
 			break;
+	}
 
-	if (i == ST_LSM6DSX_FS_LIST_SIZE)
+	if (i == fs_table->fs_len)
 		return -EINVAL;
 
 	data = ST_LSM6DSX_SHIFT_VAL(fs_table->fs_avl[i].val,
@@ -1196,18 +1211,13 @@ static ssize_t st_lsm6dsx_sysfs_scale_avail(struct device *dev,
 {
 	struct st_lsm6dsx_sensor *sensor = iio_priv(dev_get_drvdata(dev));
 	const struct st_lsm6dsx_fs_table_entry *fs_table;
-	enum st_lsm6dsx_sensor_id id = sensor->id;
 	struct st_lsm6dsx_hw *hw = sensor->hw;
 	int i, len = 0;
 
-	fs_table = &hw->settings->fs_table[id];
-	for (i = 0; i < ST_LSM6DSX_FS_LIST_SIZE; i++) {
-		if (!fs_table->fs_avl[i].gain)
-			break;
-
+	fs_table = &hw->settings->fs_table[sensor->id];
+	for (i = 0; i < fs_table->fs_len; i++)
 		len += scnprintf(buf + len, PAGE_SIZE - len, "0.%06u ",
 				 fs_table->fs_avl[i].gain);
-	}
 	buf[len - 1] = '\n';
 
 	return len;
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c
index 66fbcd94642d..f5fca2171954 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c
@@ -61,6 +61,7 @@ static const struct st_lsm6dsx_ext_dev_settings st_lsm6dsx_ext_dev_table[] = {
 				.gain = 1500,
 				.val = 0x0,
 			}, /* 1500 uG/LSB */
+			.fs_len = 1,
 		},
 		.temp_comp = {
 			.addr = 0x60,
@@ -555,13 +556,9 @@ static ssize_t st_lsm6dsx_shub_scale_avail(struct device *dev,
 	int i, len = 0;
 
 	settings = sensor->ext_info.settings;
-	for (i = 0; i < ST_LSM6DSX_FS_LIST_SIZE; i++) {
-		u16 val = settings->fs_table.fs_avl[i].gain;
-
-		if (val > 0)
-			len += scnprintf(buf + len, PAGE_SIZE - len, "0.%06u ",
-					 val);
-	}
+	for (i = 0; i < settings->fs_table.fs_len; i++)
+		len += scnprintf(buf + len, PAGE_SIZE - len, "0.%06u ",
+				 settings->fs_table.fs_avl[i].gain);
 	buf[len - 1] = '\n';
 
 	return len;

From 6c59a962e081df6d8fe43325bbfabec57e0d4751 Mon Sep 17 00:00:00 2001
From: Pascal Bouwmann <bouwmann@tau-tec.de>
Date: Thu, 29 Aug 2019 07:29:41 +0200
Subject: [PATCH 03/18] iio: fix center temperature of bmc150-accel-core

The center temperature of the supported devices stored in the constant
BMC150_ACCEL_TEMP_CENTER_VAL is not 24 degrees but 23 degrees.

It seems that some datasheets were inconsistent on this value leading
to the error.  For most usecases will only make minor difference so
not queued for stable.

Signed-off-by: Pascal Bouwmann <bouwmann@tau-tec.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 drivers/iio/accel/bmc150-accel-core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/iio/accel/bmc150-accel-core.c b/drivers/iio/accel/bmc150-accel-core.c
index cf6c0e3a83d3..121b4e89f038 100644
--- a/drivers/iio/accel/bmc150-accel-core.c
+++ b/drivers/iio/accel/bmc150-accel-core.c
@@ -117,7 +117,7 @@
 #define BMC150_ACCEL_SLEEP_1_SEC		0x0F
 
 #define BMC150_ACCEL_REG_TEMP			0x08
-#define BMC150_ACCEL_TEMP_CENTER_VAL		24
+#define BMC150_ACCEL_TEMP_CENTER_VAL		23
 
 #define BMC150_ACCEL_AXIS_TO_REG(axis)	(BMC150_ACCEL_REG_XOUT_L + (axis * 2))
 #define BMC150_AUTO_SUSPEND_DELAY_MS		2000

From 4043ecfb5fc4355a090111e14faf7945ff0fdbd5 Mon Sep 17 00:00:00 2001
From: Andreas Klinger <ak@it-klinger.de>
Date: Mon, 9 Sep 2019 14:37:21 +0200
Subject: [PATCH 04/18] iio: adc: hx711: fix bug in sampling of data

Fix bug in sampling function hx711_cycle() when interrupt occures while
PD_SCK is high. If PD_SCK is high for at least 60 us power down mode of
the sensor is entered which in turn leads to a wrong measurement.

Switch off interrupts during a PD_SCK high period and move query of DOUT
to the latest point of time which is at the end of PD_SCK low period.

This bug exists in the driver since it's initial addition. The more
interrupts on the system the higher is the probability that it happens.

Fixes: c3b2fdd0ea7e ("iio: adc: hx711: Add IIO driver for AVIA HX711")
Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 drivers/iio/adc/hx711.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/iio/adc/hx711.c b/drivers/iio/adc/hx711.c
index 88c7fe15003b..62e6c8badd22 100644
--- a/drivers/iio/adc/hx711.c
+++ b/drivers/iio/adc/hx711.c
@@ -100,14 +100,14 @@ struct hx711_data {
 
 static int hx711_cycle(struct hx711_data *hx711_data)
 {
-	int val;
+	unsigned long flags;
 
 	/*
 	 * if preempted for more then 60us while PD_SCK is high:
 	 * hx711 is going in reset
 	 * ==> measuring is false
 	 */
-	preempt_disable();
+	local_irq_save(flags);
 	gpiod_set_value(hx711_data->gpiod_pd_sck, 1);
 
 	/*
@@ -117,7 +117,6 @@ static int hx711_cycle(struct hx711_data *hx711_data)
 	 */
 	ndelay(hx711_data->data_ready_delay_ns);
 
-	val = gpiod_get_value(hx711_data->gpiod_dout);
 	/*
 	 * here we are not waiting for 0.2 us as suggested by the datasheet,
 	 * because the oscilloscope showed in a test scenario
@@ -125,7 +124,7 @@ static int hx711_cycle(struct hx711_data *hx711_data)
 	 * and 0.56 us for PD_SCK low on TI Sitara with 800 MHz
 	 */
 	gpiod_set_value(hx711_data->gpiod_pd_sck, 0);
-	preempt_enable();
+	local_irq_restore(flags);
 
 	/*
 	 * make it a square wave for addressing cases with capacitance on
@@ -133,7 +132,8 @@ static int hx711_cycle(struct hx711_data *hx711_data)
 	 */
 	ndelay(hx711_data->data_ready_delay_ns);
 
-	return val;
+	/* sample as late as possible */
+	return gpiod_get_value(hx711_data->gpiod_dout);
 }
 
 static int hx711_read(struct hx711_data *hx711_data)

From d202ce4787e446556c6b9d01f84734c3f8174ba3 Mon Sep 17 00:00:00 2001
From: Stefan Popa <stefan.popa@analog.com>
Date: Tue, 10 Sep 2019 17:43:32 +0300
Subject: [PATCH 05/18] iio: accel: adxl372: Fix/remove limitation for FIFO
 samples

Currently, the driver sets the FIFO_SAMPLES register with the number of
sample sets (maximum of 170 for 3 axis data, 256 for 2-axis and 512 for
single axis). However, the FIFO_SAMPLES register should store the number
of samples, regardless of how the FIFO format is configured.

Signed-off-by: Stefan Popa <stefan.popa@analog.com>
Fixes: f4f55ce38e5f ("iio:adxl372: Add FIFO and interrupts support")
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 drivers/iio/accel/adxl372.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/drivers/iio/accel/adxl372.c b/drivers/iio/accel/adxl372.c
index 055227cb3d43..863fe61a371f 100644
--- a/drivers/iio/accel/adxl372.c
+++ b/drivers/iio/accel/adxl372.c
@@ -474,12 +474,17 @@ static int adxl372_configure_fifo(struct adxl372_state *st)
 	if (ret < 0)
 		return ret;
 
-	fifo_samples = st->watermark & 0xFF;
+	/*
+	 * watermark stores the number of sets; we need to write the FIFO
+	 * registers with the number of samples
+	 */
+	fifo_samples = (st->watermark * st->fifo_set_size);
 	fifo_ctl = ADXL372_FIFO_CTL_FORMAT_MODE(st->fifo_format) |
 		   ADXL372_FIFO_CTL_MODE_MODE(st->fifo_mode) |
-		   ADXL372_FIFO_CTL_SAMPLES_MODE(st->watermark);
+		   ADXL372_FIFO_CTL_SAMPLES_MODE(fifo_samples);
 
-	ret = regmap_write(st->regmap, ADXL372_FIFO_SAMPLES, fifo_samples);
+	ret = regmap_write(st->regmap,
+			   ADXL372_FIFO_SAMPLES, fifo_samples & 0xFF);
 	if (ret < 0)
 		return ret;
 

From 62df81b74393079debf04961c48cb22268fc5fab Mon Sep 17 00:00:00 2001
From: Stefan Popa <stefan.popa@analog.com>
Date: Tue, 10 Sep 2019 17:44:21 +0300
Subject: [PATCH 06/18] iio: accel: adxl372: Fix push to buffers lost samples

One in two sample sets was lost by multiplying fifo_set_size with
sizeof(u16). Also, the double number of available samples were pushed to
the iio buffers.

Signed-off-by: Stefan Popa <stefan.popa@analog.com>
Fixes: f4f55ce38e5f ("iio:adxl372: Add FIFO and interrupts support")
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 drivers/iio/accel/adxl372.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/iio/accel/adxl372.c b/drivers/iio/accel/adxl372.c
index 863fe61a371f..fbad4b45fe42 100644
--- a/drivers/iio/accel/adxl372.c
+++ b/drivers/iio/accel/adxl372.c
@@ -553,8 +553,7 @@ static irqreturn_t adxl372_trigger_handler(int irq, void  *p)
 			goto err;
 
 		/* Each sample is 2 bytes */
-		for (i = 0; i < fifo_entries * sizeof(u16);
-		     i += st->fifo_set_size * sizeof(u16))
+		for (i = 0; i < fifo_entries; i += st->fifo_set_size)
 			iio_push_to_buffers(indio_dev, &st->fifo_buf[i]);
 	}
 err:

From d9a997bd4d762d5bd8cc548d762902f58b5e0a74 Mon Sep 17 00:00:00 2001
From: Stefan Popa <stefan.popa@analog.com>
Date: Tue, 10 Sep 2019 17:44:46 +0300
Subject: [PATCH 07/18] iio: accel: adxl372: Perform a reset at start up

We need to perform a reset a start up to make sure that the chip is in a
consistent state. This reset also disables all the interrupts which
should only be enabled together with the iio buffer. Not doing this, was
sometimes causing unwanted interrupts to trigger.

Signed-off-by: Stefan Popa <stefan.popa@analog.com>
Fixes: f4f55ce38e5f ("iio:adxl372: Add FIFO and interrupts support")
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 drivers/iio/accel/adxl372.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/iio/accel/adxl372.c b/drivers/iio/accel/adxl372.c
index fbad4b45fe42..67b8817995c0 100644
--- a/drivers/iio/accel/adxl372.c
+++ b/drivers/iio/accel/adxl372.c
@@ -575,6 +575,14 @@ static int adxl372_setup(struct adxl372_state *st)
 		return -ENODEV;
 	}
 
+	/*
+	 * Perform a software reset to make sure the device is in a consistent
+	 * state after start up.
+	 */
+	ret = regmap_write(st->regmap, ADXL372_RESET, ADXL372_RESET_CODE);
+	if (ret < 0)
+		return ret;
+
 	ret = adxl372_set_op_mode(st, ADXL372_STANDBY);
 	if (ret < 0)
 		return ret;

From 31922f62bb527d749b99dbc776e514bcba29b7fe Mon Sep 17 00:00:00 2001
From: Fabrice Gasnier <fabrice.gasnier@st.com>
Date: Tue, 17 Sep 2019 14:38:15 +0200
Subject: [PATCH 08/18] iio: adc: stm32-adc: move registers definitions

Move STM32 ADC registers definitions to common header.
This is precursor patch to:
- iio: adc: stm32-adc: fix a race when using several adcs with dma and irq

It keeps registers definitions as a whole block, to ease readability and
allow simple access path to EOC bits (readl) in stm32-adc-core driver.

Fixes: 2763ea0585c9 ("iio: adc: stm32: add optional dma support")

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 drivers/iio/adc/stm32-adc-core.c |  27 ------
 drivers/iio/adc/stm32-adc-core.h | 136 +++++++++++++++++++++++++++++++
 drivers/iio/adc/stm32-adc.c      | 109 -------------------------
 3 files changed, 136 insertions(+), 136 deletions(-)

diff --git a/drivers/iio/adc/stm32-adc-core.c b/drivers/iio/adc/stm32-adc-core.c
index 9b85fefc0a96..84ac326bb714 100644
--- a/drivers/iio/adc/stm32-adc-core.c
+++ b/drivers/iio/adc/stm32-adc-core.c
@@ -24,33 +24,6 @@
 
 #include "stm32-adc-core.h"
 
-/* STM32F4 - common registers for all ADC instances: 1, 2 & 3 */
-#define STM32F4_ADC_CSR			(STM32_ADCX_COMN_OFFSET + 0x00)
-#define STM32F4_ADC_CCR			(STM32_ADCX_COMN_OFFSET + 0x04)
-
-/* STM32F4_ADC_CSR - bit fields */
-#define STM32F4_EOC3			BIT(17)
-#define STM32F4_EOC2			BIT(9)
-#define STM32F4_EOC1			BIT(1)
-
-/* STM32F4_ADC_CCR - bit fields */
-#define STM32F4_ADC_ADCPRE_SHIFT	16
-#define STM32F4_ADC_ADCPRE_MASK		GENMASK(17, 16)
-
-/* STM32H7 - common registers for all ADC instances */
-#define STM32H7_ADC_CSR			(STM32_ADCX_COMN_OFFSET + 0x00)
-#define STM32H7_ADC_CCR			(STM32_ADCX_COMN_OFFSET + 0x08)
-
-/* STM32H7_ADC_CSR - bit fields */
-#define STM32H7_EOC_SLV			BIT(18)
-#define STM32H7_EOC_MST			BIT(2)
-
-/* STM32H7_ADC_CCR - bit fields */
-#define STM32H7_PRESC_SHIFT		18
-#define STM32H7_PRESC_MASK		GENMASK(21, 18)
-#define STM32H7_CKMODE_SHIFT		16
-#define STM32H7_CKMODE_MASK		GENMASK(17, 16)
-
 #define STM32_ADC_CORE_SLEEP_DELAY_MS	2000
 
 /* SYSCFG registers */
diff --git a/drivers/iio/adc/stm32-adc-core.h b/drivers/iio/adc/stm32-adc-core.h
index 8af507b3f32d..94aa2d2577dc 100644
--- a/drivers/iio/adc/stm32-adc-core.h
+++ b/drivers/iio/adc/stm32-adc-core.h
@@ -27,6 +27,142 @@
 #define STM32_ADC_MAX_ADCS		3
 #define STM32_ADCX_COMN_OFFSET		0x300
 
+/* STM32F4 - Registers for each ADC instance */
+#define STM32F4_ADC_SR			0x00
+#define STM32F4_ADC_CR1			0x04
+#define STM32F4_ADC_CR2			0x08
+#define STM32F4_ADC_SMPR1		0x0C
+#define STM32F4_ADC_SMPR2		0x10
+#define STM32F4_ADC_HTR			0x24
+#define STM32F4_ADC_LTR			0x28
+#define STM32F4_ADC_SQR1		0x2C
+#define STM32F4_ADC_SQR2		0x30
+#define STM32F4_ADC_SQR3		0x34
+#define STM32F4_ADC_JSQR		0x38
+#define STM32F4_ADC_JDR1		0x3C
+#define STM32F4_ADC_JDR2		0x40
+#define STM32F4_ADC_JDR3		0x44
+#define STM32F4_ADC_JDR4		0x48
+#define STM32F4_ADC_DR			0x4C
+
+/* STM32F4 - common registers for all ADC instances: 1, 2 & 3 */
+#define STM32F4_ADC_CSR			(STM32_ADCX_COMN_OFFSET + 0x00)
+#define STM32F4_ADC_CCR			(STM32_ADCX_COMN_OFFSET + 0x04)
+
+/* STM32F4_ADC_SR - bit fields */
+#define STM32F4_STRT			BIT(4)
+#define STM32F4_EOC			BIT(1)
+
+/* STM32F4_ADC_CR1 - bit fields */
+#define STM32F4_RES_SHIFT		24
+#define STM32F4_RES_MASK		GENMASK(25, 24)
+#define STM32F4_SCAN			BIT(8)
+#define STM32F4_EOCIE			BIT(5)
+
+/* STM32F4_ADC_CR2 - bit fields */
+#define STM32F4_SWSTART			BIT(30)
+#define STM32F4_EXTEN_SHIFT		28
+#define STM32F4_EXTEN_MASK		GENMASK(29, 28)
+#define STM32F4_EXTSEL_SHIFT		24
+#define STM32F4_EXTSEL_MASK		GENMASK(27, 24)
+#define STM32F4_EOCS			BIT(10)
+#define STM32F4_DDS			BIT(9)
+#define STM32F4_DMA			BIT(8)
+#define STM32F4_ADON			BIT(0)
+
+/* STM32F4_ADC_CSR - bit fields */
+#define STM32F4_EOC3			BIT(17)
+#define STM32F4_EOC2			BIT(9)
+#define STM32F4_EOC1			BIT(1)
+
+/* STM32F4_ADC_CCR - bit fields */
+#define STM32F4_ADC_ADCPRE_SHIFT	16
+#define STM32F4_ADC_ADCPRE_MASK		GENMASK(17, 16)
+
+/* STM32H7 - Registers for each ADC instance */
+#define STM32H7_ADC_ISR			0x00
+#define STM32H7_ADC_IER			0x04
+#define STM32H7_ADC_CR			0x08
+#define STM32H7_ADC_CFGR		0x0C
+#define STM32H7_ADC_SMPR1		0x14
+#define STM32H7_ADC_SMPR2		0x18
+#define STM32H7_ADC_PCSEL		0x1C
+#define STM32H7_ADC_SQR1		0x30
+#define STM32H7_ADC_SQR2		0x34
+#define STM32H7_ADC_SQR3		0x38
+#define STM32H7_ADC_SQR4		0x3C
+#define STM32H7_ADC_DR			0x40
+#define STM32H7_ADC_DIFSEL		0xC0
+#define STM32H7_ADC_CALFACT		0xC4
+#define STM32H7_ADC_CALFACT2		0xC8
+
+/* STM32H7 - common registers for all ADC instances */
+#define STM32H7_ADC_CSR			(STM32_ADCX_COMN_OFFSET + 0x00)
+#define STM32H7_ADC_CCR			(STM32_ADCX_COMN_OFFSET + 0x08)
+
+/* STM32H7_ADC_ISR - bit fields */
+#define STM32MP1_VREGREADY		BIT(12)
+#define STM32H7_EOC			BIT(2)
+#define STM32H7_ADRDY			BIT(0)
+
+/* STM32H7_ADC_IER - bit fields */
+#define STM32H7_EOCIE			STM32H7_EOC
+
+/* STM32H7_ADC_CR - bit fields */
+#define STM32H7_ADCAL			BIT(31)
+#define STM32H7_ADCALDIF		BIT(30)
+#define STM32H7_DEEPPWD			BIT(29)
+#define STM32H7_ADVREGEN		BIT(28)
+#define STM32H7_LINCALRDYW6		BIT(27)
+#define STM32H7_LINCALRDYW5		BIT(26)
+#define STM32H7_LINCALRDYW4		BIT(25)
+#define STM32H7_LINCALRDYW3		BIT(24)
+#define STM32H7_LINCALRDYW2		BIT(23)
+#define STM32H7_LINCALRDYW1		BIT(22)
+#define STM32H7_ADCALLIN		BIT(16)
+#define STM32H7_BOOST			BIT(8)
+#define STM32H7_ADSTP			BIT(4)
+#define STM32H7_ADSTART			BIT(2)
+#define STM32H7_ADDIS			BIT(1)
+#define STM32H7_ADEN			BIT(0)
+
+/* STM32H7_ADC_CFGR bit fields */
+#define STM32H7_EXTEN_SHIFT		10
+#define STM32H7_EXTEN_MASK		GENMASK(11, 10)
+#define STM32H7_EXTSEL_SHIFT		5
+#define STM32H7_EXTSEL_MASK		GENMASK(9, 5)
+#define STM32H7_RES_SHIFT		2
+#define STM32H7_RES_MASK		GENMASK(4, 2)
+#define STM32H7_DMNGT_SHIFT		0
+#define STM32H7_DMNGT_MASK		GENMASK(1, 0)
+
+enum stm32h7_adc_dmngt {
+	STM32H7_DMNGT_DR_ONLY,		/* Regular data in DR only */
+	STM32H7_DMNGT_DMA_ONESHOT,	/* DMA one shot mode */
+	STM32H7_DMNGT_DFSDM,		/* DFSDM mode */
+	STM32H7_DMNGT_DMA_CIRC,		/* DMA circular mode */
+};
+
+/* STM32H7_ADC_CALFACT - bit fields */
+#define STM32H7_CALFACT_D_SHIFT		16
+#define STM32H7_CALFACT_D_MASK		GENMASK(26, 16)
+#define STM32H7_CALFACT_S_SHIFT		0
+#define STM32H7_CALFACT_S_MASK		GENMASK(10, 0)
+
+/* STM32H7_ADC_CALFACT2 - bit fields */
+#define STM32H7_LINCALFACT_SHIFT	0
+#define STM32H7_LINCALFACT_MASK		GENMASK(29, 0)
+
+/* STM32H7_ADC_CSR - bit fields */
+#define STM32H7_EOC_SLV			BIT(18)
+#define STM32H7_EOC_MST			BIT(2)
+
+/* STM32H7_ADC_CCR - bit fields */
+#define STM32H7_PRESC_SHIFT		18
+#define STM32H7_PRESC_MASK		GENMASK(21, 18)
+#define STM32H7_CKMODE_SHIFT		16
+#define STM32H7_CKMODE_MASK		GENMASK(17, 16)
+
 /**
  * struct stm32_adc_common - stm32 ADC driver common data (for all instances)
  * @base:		control registers base cpu addr
diff --git a/drivers/iio/adc/stm32-adc.c b/drivers/iio/adc/stm32-adc.c
index 6a7dd08b1e0b..663f8a5012d6 100644
--- a/drivers/iio/adc/stm32-adc.c
+++ b/drivers/iio/adc/stm32-adc.c
@@ -28,115 +28,6 @@
 
 #include "stm32-adc-core.h"
 
-/* STM32F4 - Registers for each ADC instance */
-#define STM32F4_ADC_SR			0x00
-#define STM32F4_ADC_CR1			0x04
-#define STM32F4_ADC_CR2			0x08
-#define STM32F4_ADC_SMPR1		0x0C
-#define STM32F4_ADC_SMPR2		0x10
-#define STM32F4_ADC_HTR			0x24
-#define STM32F4_ADC_LTR			0x28
-#define STM32F4_ADC_SQR1		0x2C
-#define STM32F4_ADC_SQR2		0x30
-#define STM32F4_ADC_SQR3		0x34
-#define STM32F4_ADC_JSQR		0x38
-#define STM32F4_ADC_JDR1		0x3C
-#define STM32F4_ADC_JDR2		0x40
-#define STM32F4_ADC_JDR3		0x44
-#define STM32F4_ADC_JDR4		0x48
-#define STM32F4_ADC_DR			0x4C
-
-/* STM32F4_ADC_SR - bit fields */
-#define STM32F4_STRT			BIT(4)
-#define STM32F4_EOC			BIT(1)
-
-/* STM32F4_ADC_CR1 - bit fields */
-#define STM32F4_RES_SHIFT		24
-#define STM32F4_RES_MASK		GENMASK(25, 24)
-#define STM32F4_SCAN			BIT(8)
-#define STM32F4_EOCIE			BIT(5)
-
-/* STM32F4_ADC_CR2 - bit fields */
-#define STM32F4_SWSTART			BIT(30)
-#define STM32F4_EXTEN_SHIFT		28
-#define STM32F4_EXTEN_MASK		GENMASK(29, 28)
-#define STM32F4_EXTSEL_SHIFT		24
-#define STM32F4_EXTSEL_MASK		GENMASK(27, 24)
-#define STM32F4_EOCS			BIT(10)
-#define STM32F4_DDS			BIT(9)
-#define STM32F4_DMA			BIT(8)
-#define STM32F4_ADON			BIT(0)
-
-/* STM32H7 - Registers for each ADC instance */
-#define STM32H7_ADC_ISR			0x00
-#define STM32H7_ADC_IER			0x04
-#define STM32H7_ADC_CR			0x08
-#define STM32H7_ADC_CFGR		0x0C
-#define STM32H7_ADC_SMPR1		0x14
-#define STM32H7_ADC_SMPR2		0x18
-#define STM32H7_ADC_PCSEL		0x1C
-#define STM32H7_ADC_SQR1		0x30
-#define STM32H7_ADC_SQR2		0x34
-#define STM32H7_ADC_SQR3		0x38
-#define STM32H7_ADC_SQR4		0x3C
-#define STM32H7_ADC_DR			0x40
-#define STM32H7_ADC_DIFSEL		0xC0
-#define STM32H7_ADC_CALFACT		0xC4
-#define STM32H7_ADC_CALFACT2		0xC8
-
-/* STM32H7_ADC_ISR - bit fields */
-#define STM32MP1_VREGREADY		BIT(12)
-#define STM32H7_EOC			BIT(2)
-#define STM32H7_ADRDY			BIT(0)
-
-/* STM32H7_ADC_IER - bit fields */
-#define STM32H7_EOCIE			STM32H7_EOC
-
-/* STM32H7_ADC_CR - bit fields */
-#define STM32H7_ADCAL			BIT(31)
-#define STM32H7_ADCALDIF		BIT(30)
-#define STM32H7_DEEPPWD			BIT(29)
-#define STM32H7_ADVREGEN		BIT(28)
-#define STM32H7_LINCALRDYW6		BIT(27)
-#define STM32H7_LINCALRDYW5		BIT(26)
-#define STM32H7_LINCALRDYW4		BIT(25)
-#define STM32H7_LINCALRDYW3		BIT(24)
-#define STM32H7_LINCALRDYW2		BIT(23)
-#define STM32H7_LINCALRDYW1		BIT(22)
-#define STM32H7_ADCALLIN		BIT(16)
-#define STM32H7_BOOST			BIT(8)
-#define STM32H7_ADSTP			BIT(4)
-#define STM32H7_ADSTART			BIT(2)
-#define STM32H7_ADDIS			BIT(1)
-#define STM32H7_ADEN			BIT(0)
-
-/* STM32H7_ADC_CFGR bit fields */
-#define STM32H7_EXTEN_SHIFT		10
-#define STM32H7_EXTEN_MASK		GENMASK(11, 10)
-#define STM32H7_EXTSEL_SHIFT		5
-#define STM32H7_EXTSEL_MASK		GENMASK(9, 5)
-#define STM32H7_RES_SHIFT		2
-#define STM32H7_RES_MASK		GENMASK(4, 2)
-#define STM32H7_DMNGT_SHIFT		0
-#define STM32H7_DMNGT_MASK		GENMASK(1, 0)
-
-enum stm32h7_adc_dmngt {
-	STM32H7_DMNGT_DR_ONLY,		/* Regular data in DR only */
-	STM32H7_DMNGT_DMA_ONESHOT,	/* DMA one shot mode */
-	STM32H7_DMNGT_DFSDM,		/* DFSDM mode */
-	STM32H7_DMNGT_DMA_CIRC,		/* DMA circular mode */
-};
-
-/* STM32H7_ADC_CALFACT - bit fields */
-#define STM32H7_CALFACT_D_SHIFT		16
-#define STM32H7_CALFACT_D_MASK		GENMASK(26, 16)
-#define STM32H7_CALFACT_S_SHIFT		0
-#define STM32H7_CALFACT_S_MASK		GENMASK(10, 0)
-
-/* STM32H7_ADC_CALFACT2 - bit fields */
-#define STM32H7_LINCALFACT_SHIFT	0
-#define STM32H7_LINCALFACT_MASK		GENMASK(29, 0)
-
 /* Number of linear calibration shadow registers / LINCALRDYW control bits */
 #define STM32H7_LINCALFACT_NUM		6
 

From dcb10920179ab74caf88a6f2afadecfc2743b910 Mon Sep 17 00:00:00 2001
From: Fabrice Gasnier <fabrice.gasnier@st.com>
Date: Tue, 17 Sep 2019 14:38:16 +0200
Subject: [PATCH 09/18] iio: adc: stm32-adc: fix a race when using several adcs
 with dma and irq

End of conversion may be handled by using IRQ or DMA. There may be a
race when two conversions complete at the same time on several ADCs.
EOC can be read as 'set' for several ADCs, with:
- an ADC configured to use IRQs. EOCIE bit is set. The handler is normally
  called in this case.
- an ADC configured to use DMA. EOCIE bit isn't set. EOC triggers the DMA
  request instead. It's then automatically cleared by DMA read. But the
  handler gets called due to status bit is temporarily set (IRQ triggered
  by the other ADC).
So both EOC status bit in CSR and EOCIE control bit must be checked
before invoking the interrupt handler (e.g. call ISR only for
IRQ-enabled ADCs).

Fixes: 2763ea0585c9 ("iio: adc: stm32: add optional dma support")

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 drivers/iio/adc/stm32-adc-core.c | 43 +++++++++++++++++++++++++++++---
 drivers/iio/adc/stm32-adc-core.h |  1 +
 2 files changed, 41 insertions(+), 3 deletions(-)

diff --git a/drivers/iio/adc/stm32-adc-core.c b/drivers/iio/adc/stm32-adc-core.c
index 84ac326bb714..93a096a91f8c 100644
--- a/drivers/iio/adc/stm32-adc-core.c
+++ b/drivers/iio/adc/stm32-adc-core.c
@@ -44,6 +44,8 @@
  * @eoc1:	adc1 end of conversion flag in @csr
  * @eoc2:	adc2 end of conversion flag in @csr
  * @eoc3:	adc3 end of conversion flag in @csr
+ * @ier:	interrupt enable register offset for each adc
+ * @eocie_msk:	end of conversion interrupt enable mask in @ier
  */
 struct stm32_adc_common_regs {
 	u32 csr;
@@ -51,6 +53,8 @@ struct stm32_adc_common_regs {
 	u32 eoc1_msk;
 	u32 eoc2_msk;
 	u32 eoc3_msk;
+	u32 ier;
+	u32 eocie_msk;
 };
 
 struct stm32_adc_priv;
@@ -276,6 +280,8 @@ static const struct stm32_adc_common_regs stm32f4_adc_common_regs = {
 	.eoc1_msk = STM32F4_EOC1,
 	.eoc2_msk = STM32F4_EOC2,
 	.eoc3_msk = STM32F4_EOC3,
+	.ier = STM32F4_ADC_CR1,
+	.eocie_msk = STM32F4_EOCIE,
 };
 
 /* STM32H7 common registers definitions */
@@ -284,8 +290,24 @@ static const struct stm32_adc_common_regs stm32h7_adc_common_regs = {
 	.ccr = STM32H7_ADC_CCR,
 	.eoc1_msk = STM32H7_EOC_MST,
 	.eoc2_msk = STM32H7_EOC_SLV,
+	.ier = STM32H7_ADC_IER,
+	.eocie_msk = STM32H7_EOCIE,
 };
 
+static const unsigned int stm32_adc_offset[STM32_ADC_MAX_ADCS] = {
+	0, STM32_ADC_OFFSET, STM32_ADC_OFFSET * 2,
+};
+
+static unsigned int stm32_adc_eoc_enabled(struct stm32_adc_priv *priv,
+					  unsigned int adc)
+{
+	u32 ier, offset = stm32_adc_offset[adc];
+
+	ier = readl_relaxed(priv->common.base + offset + priv->cfg->regs->ier);
+
+	return ier & priv->cfg->regs->eocie_msk;
+}
+
 /* ADC common interrupt for all instances */
 static void stm32_adc_irq_handler(struct irq_desc *desc)
 {
@@ -296,13 +318,28 @@ static void stm32_adc_irq_handler(struct irq_desc *desc)
 	chained_irq_enter(chip, desc);
 	status = readl_relaxed(priv->common.base + priv->cfg->regs->csr);
 
-	if (status & priv->cfg->regs->eoc1_msk)
+	/*
+	 * End of conversion may be handled by using IRQ or DMA. There may be a
+	 * race here when two conversions complete at the same time on several
+	 * ADCs. EOC may be read 'set' for several ADCs, with:
+	 * - an ADC configured to use DMA (EOC triggers the DMA request, and
+	 *   is then automatically cleared by DR read in hardware)
+	 * - an ADC configured to use IRQs (EOCIE bit is set. The handler must
+	 *   be called in this case)
+	 * So both EOC status bit in CSR and EOCIE control bit must be checked
+	 * before invoking the interrupt handler (e.g. call ISR only for
+	 * IRQ-enabled ADCs).
+	 */
+	if (status & priv->cfg->regs->eoc1_msk &&
+	    stm32_adc_eoc_enabled(priv, 0))
 		generic_handle_irq(irq_find_mapping(priv->domain, 0));
 
-	if (status & priv->cfg->regs->eoc2_msk)
+	if (status & priv->cfg->regs->eoc2_msk &&
+	    stm32_adc_eoc_enabled(priv, 1))
 		generic_handle_irq(irq_find_mapping(priv->domain, 1));
 
-	if (status & priv->cfg->regs->eoc3_msk)
+	if (status & priv->cfg->regs->eoc3_msk &&
+	    stm32_adc_eoc_enabled(priv, 2))
 		generic_handle_irq(irq_find_mapping(priv->domain, 2));
 
 	chained_irq_exit(chip, desc);
diff --git a/drivers/iio/adc/stm32-adc-core.h b/drivers/iio/adc/stm32-adc-core.h
index 94aa2d2577dc..2579d514c2a3 100644
--- a/drivers/iio/adc/stm32-adc-core.h
+++ b/drivers/iio/adc/stm32-adc-core.h
@@ -25,6 +25,7 @@
  * --------------------------------------------------------
  */
 #define STM32_ADC_MAX_ADCS		3
+#define STM32_ADC_OFFSET		0x100
 #define STM32_ADCX_COMN_OFFSET		0x300
 
 /* STM32F4 - Registers for each ADC instance */

From ab612b1daf415b62c58e130cb3d0f30b255a14d0 Mon Sep 17 00:00:00 2001
From: Navid Emamdoost <navid.emamdoost@gmail.com>
Date: Thu, 19 Sep 2019 10:50:02 -0500
Subject: [PATCH 10/18] iio: imu: adis16400: release allocated memory on
 failure

In adis_update_scan_mode, if allocation for adis->buffer fails,
previously allocated adis->xfer needs to be released.

Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 drivers/iio/imu/adis_buffer.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/iio/imu/adis_buffer.c b/drivers/iio/imu/adis_buffer.c
index 9ac8356d9a95..f446ff497809 100644
--- a/drivers/iio/imu/adis_buffer.c
+++ b/drivers/iio/imu/adis_buffer.c
@@ -78,8 +78,11 @@ int adis_update_scan_mode(struct iio_dev *indio_dev,
 		return -ENOMEM;
 
 	adis->buffer = kcalloc(indio_dev->scan_bytes, 2, GFP_KERNEL);
-	if (!adis->buffer)
+	if (!adis->buffer) {
+		kfree(adis->xfer);
+		adis->xfer = NULL;
 		return -ENOMEM;
+	}
 
 	rx = adis->buffer;
 	tx = rx + scan_count;

From 9c0530e898f384c5d279bfcebd8bb17af1105873 Mon Sep 17 00:00:00 2001
From: Navid Emamdoost <navid.emamdoost@gmail.com>
Date: Thu, 19 Sep 2019 10:56:35 -0500
Subject: [PATCH 11/18] iio: imu: adis16400: fix memory leak

In adis_update_scan_mode_burst, if adis->buffer allocation fails release
the adis->xfer.

Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 drivers/iio/imu/adis_buffer.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/iio/imu/adis_buffer.c b/drivers/iio/imu/adis_buffer.c
index f446ff497809..4998a89d083d 100644
--- a/drivers/iio/imu/adis_buffer.c
+++ b/drivers/iio/imu/adis_buffer.c
@@ -35,8 +35,11 @@ static int adis_update_scan_mode_burst(struct iio_dev *indio_dev,
 		return -ENOMEM;
 
 	adis->buffer = kzalloc(burst_length + sizeof(u16), GFP_KERNEL);
-	if (!adis->buffer)
+	if (!adis->buffer) {
+		kfree(adis->xfer);
+		adis->xfer = NULL;
 		return -ENOMEM;
+	}
 
 	tx = adis->buffer + burst_length;
 	tx[0] = ADIS_READ_REG(adis->burst->reg_cmd);

From 972917419a0ba25afbf69d5d8c9fa644d676f887 Mon Sep 17 00:00:00 2001
From: Hans de Goede <hdegoede@redhat.com>
Date: Sun, 15 Sep 2019 20:53:42 +0200
Subject: [PATCH 12/18] iio: adc: axp288: Override TS pin bias current for some
 models
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Since commit 9bcf15f75cac ("iio: adc: axp288: Fix TS-pin handling") we
preserve the bias current set by the firmware at boot.  This fixes issues
we were seeing on various models, but it seems our old hardcoded 80ųA bias
current was working around a firmware bug on at least one model laptop.

In order to both have our cake and eat it, this commit adds a dmi based
list of models where we need to override the firmware set bias current and
adds the one model we now know needs this to it: The Lenovo Ideapad 100S
(11 inch version).

Fixes: 9bcf15f75cac ("iio: adc: axp288: Fix TS-pin handling")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=203829
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 drivers/iio/adc/axp288_adc.c | 32 ++++++++++++++++++++++++++++++++
 1 file changed, 32 insertions(+)

diff --git a/drivers/iio/adc/axp288_adc.c b/drivers/iio/adc/axp288_adc.c
index adc9cf7a075d..8ea2aed6d6f5 100644
--- a/drivers/iio/adc/axp288_adc.c
+++ b/drivers/iio/adc/axp288_adc.c
@@ -7,6 +7,7 @@
  * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  */
 
+#include <linux/dmi.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/device.h>
@@ -25,6 +26,11 @@
 #define AXP288_ADC_EN_MASK				0xF0
 #define AXP288_ADC_TS_ENABLE				0x01
 
+#define AXP288_ADC_TS_BIAS_MASK				GENMASK(5, 4)
+#define AXP288_ADC_TS_BIAS_20UA				(0 << 4)
+#define AXP288_ADC_TS_BIAS_40UA				(1 << 4)
+#define AXP288_ADC_TS_BIAS_60UA				(2 << 4)
+#define AXP288_ADC_TS_BIAS_80UA				(3 << 4)
 #define AXP288_ADC_TS_CURRENT_ON_OFF_MASK		GENMASK(1, 0)
 #define AXP288_ADC_TS_CURRENT_OFF			(0 << 0)
 #define AXP288_ADC_TS_CURRENT_ON_WHEN_CHARGING		(1 << 0)
@@ -177,10 +183,36 @@ static int axp288_adc_read_raw(struct iio_dev *indio_dev,
 	return ret;
 }
 
+/*
+ * We rely on the machine's firmware to correctly setup the TS pin bias current
+ * at boot. This lists systems with broken fw where we need to set it ourselves.
+ */
+static const struct dmi_system_id axp288_adc_ts_bias_override[] = {
+	{
+		/* Lenovo Ideapad 100S (11 inch) */
+		.matches = {
+		  DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+		  DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo ideapad 100S-11IBY"),
+		},
+		.driver_data = (void *)(uintptr_t)AXP288_ADC_TS_BIAS_80UA,
+	},
+	{}
+};
+
 static int axp288_adc_initialize(struct axp288_adc_info *info)
 {
+	const struct dmi_system_id *bias_override;
 	int ret, adc_enable_val;
 
+	bias_override = dmi_first_match(axp288_adc_ts_bias_override);
+	if (bias_override) {
+		ret = regmap_update_bits(info->regmap, AXP288_ADC_TS_PIN_CTRL,
+					 AXP288_ADC_TS_BIAS_MASK,
+					 (uintptr_t)bias_override->driver_data);
+		if (ret)
+			return ret;
+	}
+
 	/*
 	 * Determine if the TS pin is enabled and set the TS current-source
 	 * accordingly.

From fdb828e2c71a09bb9e865f41b015597c5f671705 Mon Sep 17 00:00:00 2001
From: Lorenzo Bianconi <lorenzo@kernel.org>
Date: Tue, 17 Sep 2019 00:01:29 +0200
Subject: [PATCH 13/18] iio: imu: st_lsm6dsx: fix waitime for st_lsm6dsx i2c
 controller

i2c controller available in st_lsm6dsx series performs i2c slave
configuration using accel clock as trigger.
st_lsm6dsx_shub_wait_complete routine is used to wait the controller has
carried out the requested configuration. However if the accel sensor is not
enabled we should not use its configured odr to estimate a proper timeout

Fixes: c91c1c844ebd ("iio: imu: st_lsm6dsx: add i2c embedded controller support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c
index f5fca2171954..ea472cf6db7b 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c
@@ -93,9 +93,11 @@ static const struct st_lsm6dsx_ext_dev_settings st_lsm6dsx_ext_dev_table[] = {
 static void st_lsm6dsx_shub_wait_complete(struct st_lsm6dsx_hw *hw)
 {
 	struct st_lsm6dsx_sensor *sensor;
+	u16 odr;
 
 	sensor = iio_priv(hw->iio_devs[ST_LSM6DSX_ID_ACC]);
-	msleep((2000U / sensor->odr) + 1);
+	odr = (hw->enable_mask & BIT(ST_LSM6DSX_ID_ACC)) ? sensor->odr : 13;
+	msleep((2000U / odr) + 1);
 }
 
 /**

From 1436a78c63495dd94c8d4f84a76d78d5317d481b Mon Sep 17 00:00:00 2001
From: Marco Felsch <m.felsch@pengutronix.de>
Date: Tue, 17 Sep 2019 16:56:36 +0200
Subject: [PATCH 14/18] iio: light: fix vcnl4000 devicetree hooks

Since commit ebd457d55911 ("iio: light: vcnl4000 add devicetree hooks")
the of_match_table is supported but the data shouldn't be a string.
Instead it shall be one of 'enum vcnl4000_device_ids'. Also the matching
logic for the vcnl4020 was wrong. Since the data retrieve mechanism is
still based on the i2c_device_id no failures did appeared till now.

Fixes: ebd457d55911 ("iio: light: vcnl4000 add devicetree hooks")
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Angus Ainslie (Purism) angus@akkea.ca
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 drivers/iio/light/vcnl4000.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/iio/light/vcnl4000.c b/drivers/iio/light/vcnl4000.c
index 51421ac32517..f522cb863e8c 100644
--- a/drivers/iio/light/vcnl4000.c
+++ b/drivers/iio/light/vcnl4000.c
@@ -398,19 +398,19 @@ static int vcnl4000_probe(struct i2c_client *client,
 static const struct of_device_id vcnl_4000_of_match[] = {
 	{
 		.compatible = "vishay,vcnl4000",
-		.data = "VCNL4000",
+		.data = (void *)VCNL4000,
 	},
 	{
 		.compatible = "vishay,vcnl4010",
-		.data = "VCNL4010",
+		.data = (void *)VCNL4010,
 	},
 	{
-		.compatible = "vishay,vcnl4010",
-		.data = "VCNL4020",
+		.compatible = "vishay,vcnl4020",
+		.data = (void *)VCNL4010,
 	},
 	{
 		.compatible = "vishay,vcnl4200",
-		.data = "VCNL4200",
+		.data = (void *)VCNL4200,
 	},
 	{},
 };

From 7fd1c2606508eb384992251e87d50591393a48d0 Mon Sep 17 00:00:00 2001
From: Marco Felsch <m.felsch@pengutronix.de>
Date: Tue, 17 Sep 2019 16:56:37 +0200
Subject: [PATCH 15/18] iio: light: add missing vcnl4040 of_compatible

Commit 5a441aade5b3 ("iio: light: vcnl4000 add support for the VCNL4040
proximity and light sensor") added the support for the vcnl4040 but
forgot to add the of_compatible. Fix this by adding it now.

Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Fixes: 5a441aade5b3 ("iio: light: vcnl4000 add support for the VCNL4040 proximity and light sensor")
Reviewed-by: Angus Ainslie (Purism) angus@akkea.ca
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 drivers/iio/light/vcnl4000.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/iio/light/vcnl4000.c b/drivers/iio/light/vcnl4000.c
index f522cb863e8c..16dacea9eadf 100644
--- a/drivers/iio/light/vcnl4000.c
+++ b/drivers/iio/light/vcnl4000.c
@@ -408,6 +408,10 @@ static const struct of_device_id vcnl_4000_of_match[] = {
 		.compatible = "vishay,vcnl4020",
 		.data = (void *)VCNL4010,
 	},
+	{
+		.compatible = "vishay,vcnl4040",
+		.data = (void *)VCNL4040,
+	},
 	{
 		.compatible = "vishay,vcnl4200",
 		.data = (void *)VCNL4200,

From c62dd44901cfff12acc5792bf3d2dec20bcaf392 Mon Sep 17 00:00:00 2001
From: Marco Felsch <m.felsch@pengutronix.de>
Date: Tue, 17 Sep 2019 18:09:23 +0200
Subject: [PATCH 16/18] iio: adc: ad799x: fix probe error handling

Since commit 0f7ddcc1bff1 ("iio:adc:ad799x: Write default config on probe
and reset alert status on probe") the error path is wrong since it
leaves the vref regulator on. Fix this by disabling both regulators.

Fixes: 0f7ddcc1bff1 ("iio:adc:ad799x: Write default config on probe and reset alert status on probe")
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 drivers/iio/adc/ad799x.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/iio/adc/ad799x.c b/drivers/iio/adc/ad799x.c
index 5a3ca5904ded..f658012baad8 100644
--- a/drivers/iio/adc/ad799x.c
+++ b/drivers/iio/adc/ad799x.c
@@ -810,10 +810,10 @@ static int ad799x_probe(struct i2c_client *client,
 
 	ret = ad799x_write_config(st, st->chip_config->default_config);
 	if (ret < 0)
-		goto error_disable_reg;
+		goto error_disable_vref;
 	ret = ad799x_read_config(st);
 	if (ret < 0)
-		goto error_disable_reg;
+		goto error_disable_vref;
 	st->config = ret;
 
 	ret = iio_triggered_buffer_setup(indio_dev, NULL,

From 82f3015635249a8c8c45bac303fd84905066f04f Mon Sep 17 00:00:00 2001
From: David Frey <dpfrey@gmail.com>
Date: Thu, 19 Sep 2019 15:54:18 -0700
Subject: [PATCH 17/18] iio: light: opt3001: fix mutex unlock race

When an end-of-conversion interrupt is received after performing a
single-shot reading of the light sensor, the driver was waking up the
result ready queue before checking opt->ok_to_ignore_lock to determine
if it should unlock the mutex. The problem occurred in the case where
the other thread woke up and changed the value of opt->ok_to_ignore_lock
to false prior to the interrupt thread performing its read of the
variable. In this case, the mutex would be unlocked twice.

Signed-off-by: David Frey <dpfrey@gmail.com>
Reviewed-by: Andreas Dannenberg <dannenberg@ti.com>
Fixes: 94a9b7b1809f ("iio: light: add support for TI's opt3001 light sensor")
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 drivers/iio/light/opt3001.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/iio/light/opt3001.c b/drivers/iio/light/opt3001.c
index e666879007d2..92004a2563ea 100644
--- a/drivers/iio/light/opt3001.c
+++ b/drivers/iio/light/opt3001.c
@@ -686,6 +686,7 @@ static irqreturn_t opt3001_irq(int irq, void *_iio)
 	struct iio_dev *iio = _iio;
 	struct opt3001 *opt = iio_priv(iio);
 	int ret;
+	bool wake_result_ready_queue = false;
 
 	if (!opt->ok_to_ignore_lock)
 		mutex_lock(&opt->lock);
@@ -720,13 +721,16 @@ static irqreturn_t opt3001_irq(int irq, void *_iio)
 		}
 		opt->result = ret;
 		opt->result_ready = true;
-		wake_up(&opt->result_ready_queue);
+		wake_result_ready_queue = true;
 	}
 
 out:
 	if (!opt->ok_to_ignore_lock)
 		mutex_unlock(&opt->lock);
 
+	if (wake_result_ready_queue)
+		wake_up(&opt->result_ready_queue);
+
 	return IRQ_HANDLED;
 }
 

From a26e0fbe06e20077afdaa40d1a90092f16b0bc67 Mon Sep 17 00:00:00 2001
From: zhong jiang <zhongjiang@huawei.com>
Date: Mon, 23 Sep 2019 10:04:32 +0800
Subject: [PATCH 18/18] iio: Fix an undefied reference error in noa1305_probe

I hit the following error when compile the kernel.

drivers/iio/light/noa1305.o: In function `noa1305_probe':
noa1305.c:(.text+0x65): undefined reference to `__devm_regmap_init_i2c'
make: *** [vmlinux] Error 1

Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 drivers/iio/light/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig
index 08d7e1ef2186..4a1a883dc061 100644
--- a/drivers/iio/light/Kconfig
+++ b/drivers/iio/light/Kconfig
@@ -314,6 +314,7 @@ config MAX44009
 config NOA1305
 	tristate "ON Semiconductor NOA1305 ambient light sensor"
 	depends on I2C
+	select REGMAP_I2C
 	help
 	 Say Y here if you want to build support for the ON Semiconductor
 	 NOA1305 ambient light sensor.