rtc: max77686: Remove unused code to read in 12-hour mode

The MAX77714 RTC chip is explicitly set to 24-hour mode in
max77686_rtc_probe() -> max77686_rtc_init_reg() and never changed back to
12-hour mode. Accordingly info->rtc_24hr_mode is set to 1 in the same place
and never modified later, so it is de facto a constant. Yet there is code
to read 12-hour time, which is unreachable.

Remove the unused variable, the unreachable code to manage 12-hour mode and
the defines that become unused due to the above changes.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
This commit is contained in:
Luca Ceresoli 2022-02-23 18:59:03 +01:00 committed by Lee Jones
parent a26d84633c
commit 3e2e90fefc

View File

@ -34,9 +34,6 @@
#define RTC_UDR_MASK BIT(RTC_UDR_SHIFT)
#define RTC_RBUDR_SHIFT 4
#define RTC_RBUDR_MASK BIT(RTC_RBUDR_SHIFT)
/* RTC Hour register */
#define HOUR_PM_SHIFT 6
#define HOUR_PM_MASK BIT(HOUR_PM_SHIFT)
/* RTC Alarm Enable */
#define ALARM_ENABLE_SHIFT 7
#define ALARM_ENABLE_MASK BIT(ALARM_ENABLE_SHIFT)
@ -99,7 +96,6 @@ struct max77686_rtc_info {
int rtc_irq;
int virq;
int rtc_24hr_mode;
};
enum MAX77686_RTC_OP {
@ -278,13 +274,7 @@ static void max77686_rtc_data_to_tm(u8 *data, struct rtc_time *tm,
tm->tm_sec = data[RTC_SEC] & mask;
tm->tm_min = data[RTC_MIN] & mask;
if (info->rtc_24hr_mode) {
tm->tm_hour = data[RTC_HOUR] & 0x1f;
} else {
tm->tm_hour = data[RTC_HOUR] & 0x0f;
if (data[RTC_HOUR] & HOUR_PM_MASK)
tm->tm_hour += 12;
}
tm->tm_hour = data[RTC_HOUR] & 0x1f;
/* Only a single bit is set in data[], so fls() would be equivalent */
tm->tm_wday = ffs(data[RTC_WEEKDAY] & mask) - 1;
@ -662,8 +652,6 @@ static int max77686_rtc_init_reg(struct max77686_rtc_info *info)
data[0] = (1 << BCD_EN_SHIFT) | (1 << MODEL24_SHIFT);
data[1] = (0 << BCD_EN_SHIFT) | (1 << MODEL24_SHIFT);
info->rtc_24hr_mode = 1;
ret = regmap_bulk_write(info->rtc_regmap,
info->drv_data->map[REG_RTC_CONTROLM],
data, ARRAY_SIZE(data));