mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-11 12:28:41 +08:00
ARM: LPC32XX: System suspend support
Support for system suspend and resume Signed-off-by: Kevin Wells <wellsk40@gmail.com>
This commit is contained in:
Kevin Wells
parent
c4a0208fff
commit
3c0e1947d9
146
arch/arm/mach-lpc32xx/pm.c
Normal file
146
arch/arm/mach-lpc32xx/pm.c
Normal file
@ -0,0 +1,146 @@
|
||||
/*
|
||||
* arch/arm/mach-lpc32xx/pm.c
|
||||
*
|
||||
* Original authors: Vitaly Wool, Dmitry Chigirev <source@mvista.com>
|
||||
* Modified by Kevin Wells <kevin.wells@nxp.com>
|
||||
*
|
||||
* 2005 (c) MontaVista Software, Inc. This file is licensed under
|
||||
* the terms of the GNU General Public License version 2. This program
|
||||
* is licensed "as is" without any warranty of any kind, whether express
|
||||
* or implied.
|
||||
*/
|
||||
|
||||
/*
|
||||
* LPC32XX CPU and system power management
|
||||
*
|
||||
* The LCP32XX has three CPU modes for controlling system power: run,
|
||||
* direct-run, and halt modes. When switching between halt and run modes,
|
||||
* the CPU transistions through direct-run mode. For Linux, direct-run
|
||||
* mode is not used in normal operation. Halt mode is used when the
|
||||
* system is fully suspended.
|
||||
*
|
||||
* Run mode:
|
||||
* The ARM CPU clock (HCLK_PLL), HCLK bus clock, and PCLK bus clocks are
|
||||
* derived from the HCLK PLL. The HCLK and PCLK bus rates are divided from
|
||||
* the HCLK_PLL rate. Linux runs in this mode.
|
||||
*
|
||||
* Direct-run mode:
|
||||
* The ARM CPU clock, HCLK bus clock, and PCLK bus clocks are driven from
|
||||
* SYSCLK. SYSCLK is usually around 13MHz, but may vary based on SYSCLK
|
||||
* source or the frequency of the main oscillator. In this mode, the
|
||||
* HCLK_PLL can be safely enabled, changed, or disabled.
|
||||
*
|
||||
* Halt mode:
|
||||
* SYSCLK is gated off and the CPU and system clocks are halted.
|
||||
* Peripherals based on the 32KHz oscillator clock (ie, RTC, touch,
|
||||
* key scanner, etc.) still operate if enabled. In this state, an enabled
|
||||
* system event (ie, GPIO state change, RTC match, key press, etc.) will
|
||||
* wake the system up back into direct-run mode.
|
||||
*
|
||||
* DRAM refresh
|
||||
* DRAM clocking and refresh are slightly different for systems with DDR
|
||||
* DRAM or regular SDRAM devices. If SDRAM is used in the system, the
|
||||
* SDRAM will still be accessible in direct-run mode. In DDR based systems,
|
||||
* a transistion to direct-run mode will stop all DDR accesses (no clocks).
|
||||
* Because of this, the code to switch power modes and the code to enter
|
||||
* and exit DRAM self-refresh modes must not be executed in DRAM. A small
|
||||
* section of IRAM is used instead for this.
|
||||
*
|
||||
* Suspend is handled with the following logic:
|
||||
* Backup a small area of IRAM used for the suspend code
|
||||
* Copy suspend code to IRAM
|
||||
* Transfer control to code in IRAM
|
||||
* Places DRAMs in self-refresh mode
|
||||
* Enter direct-run mode
|
||||
* Save state of HCLK_PLL PLL
|
||||
* Disable HCLK_PLL PLL
|
||||
* Enter halt mode - CPU and buses will stop
|
||||
* System enters direct-run mode when an enabled event occurs
|
||||
* HCLK PLL state is restored
|
||||
* Run mode is entered
|
||||
* DRAMS are placed back into normal mode
|
||||
* Code execution returns from IRAM
|
||||
* IRAM code are used for suspend is restored
|
||||
* Suspend mode is exited
|
||||
*/
|
||||
|
||||
#include <linux/suspend.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/slab.h>
|
||||
|
||||
#include <asm/cacheflush.h>
|
||||
|
||||
#include <mach/hardware.h>
|
||||
#include <mach/platform.h>
|
||||
#include "common.h"
|
||||
#include "clock.h"
|
||||
|
||||
#define TEMP_IRAM_AREA IO_ADDRESS(LPC32XX_IRAM_BASE)
|
||||
|
||||
/*
|
||||
* Both STANDBY and MEM suspend states are handled the same with no
|
||||
* loss of CPU or memory state
|
||||
*/
|
||||
static int lpc32xx_pm_enter(suspend_state_t state)
|
||||
{
|
||||
int (*lpc32xx_suspend_ptr) (void);
|
||||
void *iram_swap_area;
|
||||
|
||||
/* Allocate some space for temporary IRAM storage */
|
||||
iram_swap_area = kmalloc(lpc32xx_sys_suspend_sz, GFP_KERNEL);
|
||||
if (!iram_swap_area) {
|
||||
printk(KERN_ERR
|
||||
"PM Suspend: cannot allocate memory to save portion "
|
||||
"of SRAM\n");
|
||||
return -ENOMEM;
|
||||
}
|
||||
|
||||
/* Backup a small area of IRAM used for the suspend code */
|
||||
memcpy(iram_swap_area, (void *) TEMP_IRAM_AREA,
|
||||
lpc32xx_sys_suspend_sz);
|
||||
|
||||
/*
|
||||
* Copy code to suspend system into IRAM. The suspend code
|
||||
* needs to run from IRAM as DRAM may no longer be available
|
||||
* when the PLL is stopped.
|
||||
*/
|
||||
memcpy((void *) TEMP_IRAM_AREA, &lpc32xx_sys_suspend,
|
||||
lpc32xx_sys_suspend_sz);
|
||||
flush_icache_range((unsigned long)TEMP_IRAM_AREA,
|
||||
(unsigned long)(TEMP_IRAM_AREA) + lpc32xx_sys_suspend_sz);
|
||||
|
||||
/* Transfer to suspend code in IRAM */
|
||||
lpc32xx_suspend_ptr = (void *) TEMP_IRAM_AREA;
|
||||
flush_cache_all();
|
||||
(void) lpc32xx_suspend_ptr();
|
||||
|
||||
/* Restore original IRAM contents */
|
||||
memcpy((void *) TEMP_IRAM_AREA, iram_swap_area,
|
||||
lpc32xx_sys_suspend_sz);
|
||||
|
||||
kfree(iram_swap_area);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct platform_suspend_ops lpc32xx_pm_ops = {
|
||||
.valid = suspend_valid_only_mem,
|
||||
.enter = lpc32xx_pm_enter,
|
||||
};
|
||||
|
||||
#define EMC_DYN_MEM_CTRL_OFS 0x20
|
||||
#define EMC_SRMMC (1 << 3)
|
||||
#define EMC_CTRL_REG io_p2v(LPC32XX_EMC_BASE + EMC_DYN_MEM_CTRL_OFS)
|
||||
static int __init lpc32xx_pm_init(void)
|
||||
{
|
||||
/*
|
||||
* Setup SDRAM self-refresh clock to automatically disable o
|
||||
* start of self-refresh. This only needs to be done once.
|
||||
*/
|
||||
__raw_writel(__raw_readl(EMC_CTRL_REG) | EMC_SRMMC, EMC_CTRL_REG);
|
||||
|
||||
suspend_set_ops(&lpc32xx_pm_ops);
|
||||
|
||||
return 0;
|
||||
}
|
||||
arch_initcall(lpc32xx_pm_init);
|
||||
151
arch/arm/mach-lpc32xx/suspend.S
Normal file
151
arch/arm/mach-lpc32xx/suspend.S
Normal file
@ -0,0 +1,151 @@
|
||||
/*
|
||||
* arch/arm/mach-lpc32xx/suspend.S
|
||||
*
|
||||
* Original authors: Dmitry Chigirev, Vitaly Wool <source@mvista.com>
|
||||
* Modified by Kevin Wells <kevin.wells@nxp.com>
|
||||
*
|
||||
* 2005 (c) MontaVista Software, Inc. This file is licensed under
|
||||
* the terms of the GNU General Public License version 2. This program
|
||||
* is licensed "as is" without any warranty of any kind, whether express
|
||||
* or implied.
|
||||
*/
|
||||
#include <linux/linkage.h>
|
||||
#include <asm/assembler.h>
|
||||
#include <mach/platform.h>
|
||||
#include <mach/hardware.h>
|
||||
|
||||
/* Using named register defines makes the code easier to follow */
|
||||
#define WORK1_REG r0
|
||||
#define WORK2_REG r1
|
||||
#define SAVED_HCLK_DIV_REG r2
|
||||
#define SAVED_HCLK_PLL_REG r3
|
||||
#define SAVED_DRAM_CLKCTRL_REG r4
|
||||
#define SAVED_PWR_CTRL_REG r5
|
||||
#define CLKPWRBASE_REG r6
|
||||
#define EMCBASE_REG r7
|
||||
|
||||
#define LPC32XX_EMC_STATUS_OFFS 0x04
|
||||
#define LPC32XX_EMC_STATUS_BUSY 0x1
|
||||
#define LPC32XX_EMC_STATUS_SELF_RFSH 0x4
|
||||
|
||||
#define LPC32XX_CLKPWR_PWR_CTRL_OFFS 0x44
|
||||
#define LPC32XX_CLKPWR_HCLK_DIV_OFFS 0x40
|
||||
#define LPC32XX_CLKPWR_HCLKPLL_CTRL_OFFS 0x58
|
||||
|
||||
#define CLKPWR_PCLK_DIV_MASK 0xFFFFFE7F
|
||||
|
||||
.text
|
||||
|
||||
ENTRY(lpc32xx_sys_suspend)
|
||||
@ Save a copy of the used registers in IRAM, r0 is corrupted
|
||||
adr r0, tmp_stack_end
|
||||
stmfd r0!, {r3 - r7, sp, lr}
|
||||
|
||||
@ Load a few common register addresses
|
||||
adr WORK1_REG, reg_bases
|
||||
ldr CLKPWRBASE_REG, [WORK1_REG, #0]
|
||||
ldr EMCBASE_REG, [WORK1_REG, #4]
|
||||
|
||||
ldr SAVED_PWR_CTRL_REG, [CLKPWRBASE_REG,\
|
||||
#LPC32XX_CLKPWR_PWR_CTRL_OFFS]
|
||||
orr WORK1_REG, SAVED_PWR_CTRL_REG, #LPC32XX_CLKPWR_SDRAM_SELF_RFSH
|
||||
|
||||
@ Wait for SDRAM busy status to go busy and then idle
|
||||
@ This guarantees a small windows where DRAM isn't busy
|
||||
1:
|
||||
ldr WORK2_REG, [EMCBASE_REG, #LPC32XX_EMC_STATUS_OFFS]
|
||||
and WORK2_REG, WORK2_REG, #LPC32XX_EMC_STATUS_BUSY
|
||||
cmp WORK2_REG, #LPC32XX_EMC_STATUS_BUSY
|
||||
bne 1b @ Branch while idle
|
||||
2:
|
||||
ldr WORK2_REG, [EMCBASE_REG, #LPC32XX_EMC_STATUS_OFFS]
|
||||
and WORK2_REG, WORK2_REG, #LPC32XX_EMC_STATUS_BUSY
|
||||
cmp WORK2_REG, #LPC32XX_EMC_STATUS_BUSY
|
||||
beq 2b @ Branch until idle
|
||||
|
||||
@ Setup self-refresh with support for manual exit of
|
||||
@ self-refresh mode
|
||||
str WORK1_REG, [CLKPWRBASE_REG, #LPC32XX_CLKPWR_PWR_CTRL_OFFS]
|
||||
orr WORK2_REG, WORK1_REG, #LPC32XX_CLKPWR_UPD_SDRAM_SELF_RFSH
|
||||
str WORK2_REG, [CLKPWRBASE_REG, #LPC32XX_CLKPWR_PWR_CTRL_OFFS]
|
||||
str WORK1_REG, [CLKPWRBASE_REG, #LPC32XX_CLKPWR_PWR_CTRL_OFFS]
|
||||
|
||||
@ Wait for self-refresh acknowledge, clocks to the DRAM device
|
||||
@ will automatically stop on start of self-refresh
|
||||
3:
|
||||
ldr WORK2_REG, [EMCBASE_REG, #LPC32XX_EMC_STATUS_OFFS]
|
||||
and WORK2_REG, WORK2_REG, #LPC32XX_EMC_STATUS_SELF_RFSH
|
||||
cmp WORK2_REG, #LPC32XX_EMC_STATUS_SELF_RFSH
|
||||
bne 3b @ Branch until self-refresh mode starts
|
||||
|
||||
@ Enter direct-run mode from run mode
|
||||
bic WORK1_REG, WORK1_REG, #LPC32XX_CLKPWR_SELECT_RUN_MODE
|
||||
str WORK1_REG, [CLKPWRBASE_REG, #LPC32XX_CLKPWR_PWR_CTRL_OFFS]
|
||||
|
||||
@ Safe disable of DRAM clock in EMC block, prevents DDR sync
|
||||
@ issues on restart
|
||||
ldr SAVED_HCLK_DIV_REG, [CLKPWRBASE_REG,\
|
||||
#LPC32XX_CLKPWR_HCLK_DIV_OFFS]
|
||||
and WORK2_REG, SAVED_HCLK_DIV_REG, #CLKPWR_PCLK_DIV_MASK
|
||||
str WORK2_REG, [CLKPWRBASE_REG, #LPC32XX_CLKPWR_HCLK_DIV_OFFS]
|
||||
|
||||
@ Save HCLK PLL state and disable HCLK PLL
|
||||
ldr SAVED_HCLK_PLL_REG, [CLKPWRBASE_REG,\
|
||||
#LPC32XX_CLKPWR_HCLKPLL_CTRL_OFFS]
|
||||
bic WORK2_REG, SAVED_HCLK_PLL_REG, #LPC32XX_CLKPWR_HCLKPLL_POWER_UP
|
||||
str WORK2_REG, [CLKPWRBASE_REG, #LPC32XX_CLKPWR_HCLKPLL_CTRL_OFFS]
|
||||
|
||||
@ Enter stop mode until an enabled event occurs
|
||||
orr WORK1_REG, WORK1_REG, #LPC32XX_CLKPWR_STOP_MODE_CTRL
|
||||
str WORK1_REG, [CLKPWRBASE_REG, #LPC32XX_CLKPWR_PWR_CTRL_OFFS]
|
||||
.rept 9
|
||||
nop
|
||||
.endr
|
||||
|
||||
@ Clear stop status
|
||||
bic WORK1_REG, WORK1_REG, #LPC32XX_CLKPWR_STOP_MODE_CTRL
|
||||
|
||||
@ Restore original HCLK PLL value and wait for PLL lock
|
||||
str SAVED_HCLK_PLL_REG, [CLKPWRBASE_REG,\
|
||||
#LPC32XX_CLKPWR_HCLKPLL_CTRL_OFFS]
|
||||
4:
|
||||
ldr WORK2_REG, [CLKPWRBASE_REG, #LPC32XX_CLKPWR_HCLKPLL_CTRL_OFFS]
|
||||
and WORK2_REG, WORK2_REG, #LPC32XX_CLKPWR_HCLKPLL_PLL_STS
|
||||
bne 4b
|
||||
|
||||
@ Re-enter run mode with self-refresh flag cleared, but no DRAM
|
||||
@ update yet. DRAM is still in self-refresh
|
||||
str SAVED_PWR_CTRL_REG, [CLKPWRBASE_REG,\
|
||||
#LPC32XX_CLKPWR_PWR_CTRL_OFFS]
|
||||
|
||||
@ Restore original DRAM clock mode to restore DRAM clocks
|
||||
str SAVED_HCLK_DIV_REG, [CLKPWRBASE_REG,\
|
||||
#LPC32XX_CLKPWR_HCLK_DIV_OFFS]
|
||||
|
||||
@ Clear self-refresh mode
|
||||
orr WORK1_REG, SAVED_PWR_CTRL_REG,\
|
||||
#LPC32XX_CLKPWR_UPD_SDRAM_SELF_RFSH
|
||||
str WORK1_REG, [CLKPWRBASE_REG, #LPC32XX_CLKPWR_PWR_CTRL_OFFS]
|
||||
str SAVED_PWR_CTRL_REG, [CLKPWRBASE_REG,\
|
||||
#LPC32XX_CLKPWR_PWR_CTRL_OFFS]
|
||||
|
||||
@ Wait for EMC to clear self-refresh mode
|
||||
5:
|
||||
ldr WORK2_REG, [EMCBASE_REG, #LPC32XX_EMC_STATUS_OFFS]
|
||||
and WORK2_REG, WORK2_REG, #LPC32XX_EMC_STATUS_SELF_RFSH
|
||||
bne 5b @ Branch until self-refresh has exited
|
||||
|
||||
@ restore regs and return
|
||||
adr r0, tmp_stack
|
||||
ldmfd r0!, {r3 - r7, sp, pc}
|
||||
|
||||
reg_bases:
|
||||
.long IO_ADDRESS(LPC32XX_CLK_PM_BASE)
|
||||
.long IO_ADDRESS(LPC32XX_EMC_BASE)
|
||||
|
||||
tmp_stack:
|
||||
.long 0, 0, 0, 0, 0, 0, 0
|
||||
tmp_stack_end:
|
||||
|
||||
ENTRY(lpc32xx_sys_suspend_sz)
|
||||
.word . - lpc32xx_sys_suspend
|
||||
Loading…
Reference in New Issue
Block a user