mfd: intel_soc_pmic_chtwc: Add cht_wc_model data to struct intel_soc_pmic

Tablet / laptop designs using an Intel Cherry Trail x86 main SoC with
an Intel Whiskey Cove PMIC do not use a single standard setup for
the charger, fuel-gauge and other chips surrounding the PMIC /
charging+data USB port.

Unlike what is normal on x86 this diversity in designs is not handled
by the ACPI tables. On 2 of the 3 known designs there are no standard
(PNP0C0A) ACPI battery devices and on the 3th design the ACPI battery
device does not work under Linux due to it requiring non-standard
and undocumented ACPI behavior.

So to make things work under Linux we use native charger and fuel-gauge
drivers on these devices, re-using the native drivers used on ARM boards
with the same charger / fuel-gauge ICs.

This requires various MFD-cell drivers for the CHT-WC PMIC cells to
know which model they are exactly running on so that they can e.g.
instantiate an I2C-client for the right model charger-IC (the charger
is connected to an I2C-controller which is part of the PMIC).

Rather then duplicating DMI-id matching to check which model we are
running on in each MFD-cell driver, add a check for this to the
shared drivers/mfd/intel_soc_pmic_chtwc.c code by using a
DMI table for all 3 known models:

1. The GPD Win and GPD Pocket mini-laptops, these are really 2 models
but the Pocket re-uses the GPD Win's design in a different housing:

The WC PMIC is connected to a TI BQ24292i charger, paired with
a Maxim MAX17047 fuelgauge + a FUSB302 USB Type-C Controller +
a PI3USB30532 USB switch, for a fully functional Type-C port.

2. The Xiaomi Mi Pad 2:

The WC PMIC is connected to a TI BQ25890 charger, paired with
a TI BQ27520 fuelgauge, using the TI BQ25890 for BC1.2 charger type
detection, for a USB-2 only Type-C port without PD.

3. The Lenovo Yoga Book YB1-X90 / Lenovo Yoga Book YB1-X91 series:

The WC PMIC is connected to a TI BQ25892 charger, paired with
a TI BQ27542 fuelgauge, using the WC PMIC for BC1.2 charger type
detection and using the BQ25892's Mediatek Pump Express+ (1.0)
support to enable charging with up to 12V through a micro-USB port.

Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
This commit is contained in:
Hans de Goede 2022-02-01 14:07:00 +01:00 committed by Sebastian Reichel
parent c1ae3a4efb
commit 3afcbe0947
2 changed files with 48 additions and 0 deletions

View File

@ -10,6 +10,7 @@
#include <linux/acpi.h>
#include <linux/delay.h>
#include <linux/dmi.h>
#include <linux/err.h>
#include <linux/i2c.h>
#include <linux/interrupt.h>
@ -134,9 +135,44 @@ static const struct regmap_irq_chip cht_wc_regmap_irq_chip = {
.num_regs = 1,
};
static const struct dmi_system_id cht_wc_model_dmi_ids[] = {
{
/* GPD win / GPD pocket mini laptops */
.driver_data = (void *)(long)INTEL_CHT_WC_GPD_WIN_POCKET,
/*
* This DMI match may not seem unique, but it is. In the 67000+
* DMI decode dumps from linux-hardware.org only 116 have
* board_vendor set to "AMI Corporation" and of those 116 only
* the GPD win's and pocket's board_name is "Default string".
*/
.matches = {
DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"),
DMI_EXACT_MATCH(DMI_BOARD_NAME, "Default string"),
DMI_EXACT_MATCH(DMI_BOARD_SERIAL, "Default string"),
DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Default string"),
},
}, {
/* Xiaomi Mi Pad 2 */
.driver_data = (void *)(long)INTEL_CHT_WC_XIAOMI_MIPAD2,
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Xiaomi Inc"),
DMI_MATCH(DMI_PRODUCT_NAME, "Mipad2"),
},
}, {
/* Lenovo Yoga Book X90F / X91F / X91L */
.driver_data = (void *)(long)INTEL_CHT_WC_LENOVO_YOGABOOK1,
.matches = {
/* Non exact match to match all versions */
DMI_MATCH(DMI_PRODUCT_NAME, "Lenovo YB1-X9"),
},
},
{ }
};
static int cht_wc_probe(struct i2c_client *client)
{
struct device *dev = &client->dev;
const struct dmi_system_id *id;
struct intel_soc_pmic *pmic;
acpi_status status;
unsigned long long hrv;
@ -160,6 +196,10 @@ static int cht_wc_probe(struct i2c_client *client)
if (!pmic)
return -ENOMEM;
id = dmi_first_match(cht_wc_model_dmi_ids);
if (id)
pmic->cht_wc_model = (long)id->driver_data;
pmic->irq = client->irq;
pmic->dev = dev;
i2c_set_clientdata(client, pmic);

View File

@ -13,6 +13,13 @@
#include <linux/regmap.h>
enum intel_cht_wc_models {
INTEL_CHT_WC_UNKNOWN,
INTEL_CHT_WC_GPD_WIN_POCKET,
INTEL_CHT_WC_XIAOMI_MIPAD2,
INTEL_CHT_WC_LENOVO_YOGABOOK1,
};
/**
* struct intel_soc_pmic - Intel SoC PMIC data
* @irq: Master interrupt number of the parent PMIC device
@ -39,6 +46,7 @@ struct intel_soc_pmic {
struct regmap_irq_chip_data *irq_chip_data_crit;
struct device *dev;
struct intel_scu_ipc_dev *scu;
enum intel_cht_wc_models cht_wc_model;
};
int intel_soc_pmic_exec_mipi_pmic_seq_element(u16 i2c_address, u32 reg_address,