ath9k: Cleanup get_rate() interface

The interface to calculate the TX rate for a data frame
was convoluted with lots of redundant arguments being
passed around. Remove all of that and make it simple.

Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
This commit is contained in:
Sujith 2009-01-30 14:29:15 +05:30 committed by John W. Linville
parent a6c8d375f5
commit 3900898c7a

View File

@ -631,8 +631,7 @@ static u8 ath_rc_setvalid_htrates(struct ath_rate_priv *ath_rc_priv,
static u8 ath_rc_ratefind_ht(struct ath_softc *sc,
struct ath_rate_priv *ath_rc_priv,
struct ath_rate_table *rate_table,
int probe_allowed, int *is_probing,
int is_retry)
int *is_probing)
{
u32 dt, best_thruput, this_thruput, now_msec;
u8 rate, next_rate, best_rate, maxindex, minindex;
@ -714,13 +713,6 @@ static u8 ath_rc_ratefind_ht(struct ath_softc *sc,
}
rate = best_rate;
/* if we are retrying for more than half the number
* of max retries, use the min rate for the next retry
*/
if (is_retry)
rate = ath_rc_priv->valid_rate_index[minindex];
ath_rc_priv->rssi_last_lookup = rssi_last;
/*
@ -728,13 +720,12 @@ static u8 ath_rc_ratefind_ht(struct ath_softc *sc,
* non-monoticity of 11g's rate table
*/
if (rate >= ath_rc_priv->rate_max_phy && probe_allowed) {
if (rate >= ath_rc_priv->rate_max_phy) {
rate = ath_rc_priv->rate_max_phy;
/* Probe the next allowed phy state */
/* FIXME:XXXX Check to make sure ratMax is checked properly */
if (ath_rc_get_nextvalid_txrate(rate_table,
ath_rc_priv, rate, &next_rate) &&
ath_rc_priv, rate, &next_rate) &&
(now_msec - ath_rc_priv->probe_time >
rate_table->probe_interval) &&
(ath_rc_priv->hw_maxretry_pktcnt >= 1)) {
@ -804,54 +795,54 @@ static u8 ath_rc_rate_getidx(struct ath_softc *sc,
static void ath_rc_ratefind(struct ath_softc *sc,
struct ath_rate_priv *ath_rc_priv,
int num_tries, int num_rates,
struct ieee80211_tx_info *tx_info, int *is_probe,
int is_retry)
struct ieee80211_tx_rate_control *txrc)
{
u8 try_per_rate = 0, i = 0, rix, nrix;
struct ath_rate_table *rate_table;
struct sk_buff *skb = txrc->skb;
struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
struct ieee80211_tx_rate *rates = tx_info->control.rates;
u8 try_per_rate = 0, i = 0, rix, nrix;
int is_probe = 0;
rate_table = sc->cur_rate_table;
rix = ath_rc_ratefind_ht(sc, ath_rc_priv, rate_table, 1,
is_probe, is_retry);
rix = ath_rc_ratefind_ht(sc, ath_rc_priv, rate_table, &is_probe);
nrix = rix;
if (*is_probe) {
if (is_probe) {
/* set one try for probe rates. For the
* probes don't enable rts */
ath_rc_rate_set_series(rate_table,
&rates[i++], 1, nrix, 0);
ath_rc_rate_set_series(rate_table, &rates[i++],
1, nrix, 0);
try_per_rate = (num_tries/num_rates);
try_per_rate = (ATH_11N_TXMAXTRY/4);
/* Get the next tried/allowed rate. No RTS for the next series
* after the probe rate
*/
nrix = ath_rc_rate_getidx(sc,
ath_rc_priv, rate_table, nrix, 1, 0);
ath_rc_rate_set_series(rate_table,
&rates[i++], try_per_rate, nrix, 0);
nrix = ath_rc_rate_getidx(sc, ath_rc_priv,
rate_table, nrix, 1, 0);
ath_rc_rate_set_series(rate_table, &rates[i++],
try_per_rate, nrix, 0);
} else {
try_per_rate = (num_tries/num_rates);
try_per_rate = (ATH_11N_TXMAXTRY/4);
/* Set the choosen rate. No RTS for first series entry. */
ath_rc_rate_set_series(rate_table,
&rates[i++], try_per_rate, nrix, 0);
ath_rc_rate_set_series(rate_table, &rates[i++],
try_per_rate, nrix, 0);
}
/* Fill in the other rates for multirate retry */
for ( ; i < num_rates; i++) {
for ( ; i < 4; i++) {
u8 try_num;
u8 min_rate;
try_num = ((i + 1) == num_rates) ?
num_tries - (try_per_rate * i) : try_per_rate ;
min_rate = (((i + 1) == num_rates) && 0);
try_num = ((i + 1) == 4) ?
ATH_11N_TXMAXTRY - (try_per_rate * i) : try_per_rate ;
min_rate = (((i + 1) == 4) && 0);
nrix = ath_rc_rate_getidx(sc, ath_rc_priv,
rate_table, nrix, 1, min_rate);
/* All other rates in the series have RTS enabled */
ath_rc_rate_set_series(rate_table,
&rates[i], try_num, nrix, 1);
ath_rc_rate_set_series(rate_table, &rates[i],
try_num, nrix, 1);
}
/*
@ -1503,10 +1494,9 @@ static void ath_get_rate(void *priv, struct ieee80211_sta *sta, void *priv_sta,
struct ieee80211_supported_band *sband = txrc->sband;
struct sk_buff *skb = txrc->skb;
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
struct ath_softc *sc = priv;
struct ath_rate_priv *ath_rc_priv = priv_sta;
struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
int is_probe = 0;
__le16 fc = hdr->frame_control;
/* lowest rate for management and multicast/broadcast frames */
@ -1519,8 +1509,7 @@ static void ath_get_rate(void *priv, struct ieee80211_sta *sta, void *priv_sta,
}
/* Find tx rate for unicast frames */
ath_rc_ratefind(sc, ath_rc_priv, ATH_11N_TXMAXTRY, 4,
tx_info, &is_probe, false);
ath_rc_ratefind(sc, ath_rc_priv, txrc);
}
static void ath_rate_init(void *priv, struct ieee80211_supported_band *sband,