Merge remote-tracking branches 'asoc/topic/wm9090', 'asoc/topic/wm9712', 'asoc/topic/wm9713' and 'asoc/topic/wm_adsp' into asoc-next

This commit is contained in:
Mark Brown 2018-03-28 10:31:58 +08:00
No known key found for this signature in database
GPG Key ID: 24D68B725D5487D0
5 changed files with 87 additions and 75 deletions

View File

@ -143,23 +143,23 @@ static bool wm9090_readable(struct device *dev, unsigned int reg)
}
}
static void wait_for_dc_servo(struct snd_soc_codec *codec)
static void wait_for_dc_servo(struct snd_soc_component *component)
{
unsigned int reg;
int count = 0;
dev_dbg(codec->dev, "Waiting for DC servo...\n");
dev_dbg(component->dev, "Waiting for DC servo...\n");
do {
count++;
msleep(1);
reg = snd_soc_read(codec, WM9090_DC_SERVO_READBACK_0);
dev_dbg(codec->dev, "DC servo status: %x\n", reg);
reg = snd_soc_component_read32(component, WM9090_DC_SERVO_READBACK_0);
dev_dbg(component->dev, "DC servo status: %x\n", reg);
} while ((reg & WM9090_DCS_CAL_COMPLETE_MASK)
!= WM9090_DCS_CAL_COMPLETE_MASK && count < 1000);
if ((reg & WM9090_DCS_CAL_COMPLETE_MASK)
!= WM9090_DCS_CAL_COMPLETE_MASK)
dev_err(codec->dev, "Timed out waiting for DC Servo\n");
dev_err(component->dev, "Timed out waiting for DC Servo\n");
}
static const DECLARE_TLV_DB_RANGE(in_tlv,
@ -251,22 +251,22 @@ SOC_SINGLE_TLV("MIXOUTR IN2B Volume", WM9090_OUTPUT_MIXER4, 0, 3, 1,
static int hp_ev(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *kcontrol, int event)
{
struct snd_soc_codec *codec = snd_soc_dapm_to_codec(w->dapm);
unsigned int reg = snd_soc_read(codec, WM9090_ANALOGUE_HP_0);
struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
unsigned int reg = snd_soc_component_read32(component, WM9090_ANALOGUE_HP_0);
switch (event) {
case SND_SOC_DAPM_POST_PMU:
snd_soc_update_bits(codec, WM9090_CHARGE_PUMP_1,
snd_soc_component_update_bits(component, WM9090_CHARGE_PUMP_1,
WM9090_CP_ENA, WM9090_CP_ENA);
msleep(5);
snd_soc_update_bits(codec, WM9090_POWER_MANAGEMENT_1,
snd_soc_component_update_bits(component, WM9090_POWER_MANAGEMENT_1,
WM9090_HPOUT1L_ENA | WM9090_HPOUT1R_ENA,
WM9090_HPOUT1L_ENA | WM9090_HPOUT1R_ENA);
reg |= WM9090_HPOUT1L_DLY | WM9090_HPOUT1R_DLY;
snd_soc_write(codec, WM9090_ANALOGUE_HP_0, reg);
snd_soc_component_write(component, WM9090_ANALOGUE_HP_0, reg);
/* Start the DC servo. We don't currently use the
* ability to save the state since we don't have full
@ -274,16 +274,16 @@ static int hp_ev(struct snd_soc_dapm_widget *w,
* DC offsets; see the WM8904 driver for an example of
* doing so.
*/
snd_soc_write(codec, WM9090_DC_SERVO_0,
snd_soc_component_write(component, WM9090_DC_SERVO_0,
WM9090_DCS_ENA_CHAN_0 |
WM9090_DCS_ENA_CHAN_1 |
WM9090_DCS_TRIG_STARTUP_1 |
WM9090_DCS_TRIG_STARTUP_0);
wait_for_dc_servo(codec);
wait_for_dc_servo(component);
reg |= WM9090_HPOUT1R_OUTP | WM9090_HPOUT1R_RMV_SHORT |
WM9090_HPOUT1L_OUTP | WM9090_HPOUT1L_RMV_SHORT;
snd_soc_write(codec, WM9090_ANALOGUE_HP_0, reg);
snd_soc_component_write(component, WM9090_ANALOGUE_HP_0, reg);
break;
case SND_SOC_DAPM_PRE_PMD:
@ -294,15 +294,15 @@ static int hp_ev(struct snd_soc_dapm_widget *w,
WM9090_HPOUT1R_DLY |
WM9090_HPOUT1R_OUTP);
snd_soc_write(codec, WM9090_ANALOGUE_HP_0, reg);
snd_soc_component_write(component, WM9090_ANALOGUE_HP_0, reg);
snd_soc_write(codec, WM9090_DC_SERVO_0, 0);
snd_soc_component_write(component, WM9090_DC_SERVO_0, 0);
snd_soc_update_bits(codec, WM9090_POWER_MANAGEMENT_1,
snd_soc_component_update_bits(component, WM9090_POWER_MANAGEMENT_1,
WM9090_HPOUT1L_ENA | WM9090_HPOUT1R_ENA,
0);
snd_soc_update_bits(codec, WM9090_CHARGE_PUMP_1,
snd_soc_component_update_bits(component, WM9090_CHARGE_PUMP_1,
WM9090_CP_ENA, 0);
break;
}
@ -419,10 +419,10 @@ static const struct snd_soc_dapm_route audio_map_in2_diff[] = {
{ "IN2A PGA", NULL, "IN2-" },
};
static int wm9090_add_controls(struct snd_soc_codec *codec)
static int wm9090_add_controls(struct snd_soc_component *component)
{
struct wm9090_priv *wm9090 = snd_soc_codec_get_drvdata(codec);
struct snd_soc_dapm_context *dapm = snd_soc_codec_get_dapm(codec);
struct wm9090_priv *wm9090 = snd_soc_component_get_drvdata(component);
struct snd_soc_dapm_context *dapm = snd_soc_component_get_dapm(component);
int i;
snd_soc_dapm_new_controls(dapm, wm9090_dapm_widgets,
@ -430,7 +430,7 @@ static int wm9090_add_controls(struct snd_soc_codec *codec)
snd_soc_dapm_add_routes(dapm, audio_map, ARRAY_SIZE(audio_map));
snd_soc_add_codec_controls(codec, wm9090_controls,
snd_soc_add_component_controls(component, wm9090_controls,
ARRAY_SIZE(wm9090_controls));
if (wm9090->pdata.lin1_diff) {
@ -439,7 +439,7 @@ static int wm9090_add_controls(struct snd_soc_codec *codec)
} else {
snd_soc_dapm_add_routes(dapm, audio_map_in1_se,
ARRAY_SIZE(audio_map_in1_se));
snd_soc_add_codec_controls(codec, wm9090_in1_se_controls,
snd_soc_add_component_controls(component, wm9090_in1_se_controls,
ARRAY_SIZE(wm9090_in1_se_controls));
}
@ -449,18 +449,18 @@ static int wm9090_add_controls(struct snd_soc_codec *codec)
} else {
snd_soc_dapm_add_routes(dapm, audio_map_in2_se,
ARRAY_SIZE(audio_map_in2_se));
snd_soc_add_codec_controls(codec, wm9090_in2_se_controls,
snd_soc_add_component_controls(component, wm9090_in2_se_controls,
ARRAY_SIZE(wm9090_in2_se_controls));
}
if (wm9090->pdata.agc_ena) {
for (i = 0; i < ARRAY_SIZE(wm9090->pdata.agc); i++)
snd_soc_write(codec, WM9090_AGC_CONTROL_0 + i,
snd_soc_component_write(component, WM9090_AGC_CONTROL_0 + i,
wm9090->pdata.agc[i]);
snd_soc_update_bits(codec, WM9090_POWER_MANAGEMENT_3,
snd_soc_component_update_bits(component, WM9090_POWER_MANAGEMENT_3,
WM9090_AGC_ENA, WM9090_AGC_ENA);
} else {
snd_soc_update_bits(codec, WM9090_POWER_MANAGEMENT_3,
snd_soc_component_update_bits(component, WM9090_POWER_MANAGEMENT_3,
WM9090_AGC_ENA, 0);
}
@ -472,19 +472,19 @@ static int wm9090_add_controls(struct snd_soc_codec *codec)
* The machine driver should call this from their set_bias_level; if there
* isn't one then this can just be set as the set_bias_level function.
*/
static int wm9090_set_bias_level(struct snd_soc_codec *codec,
static int wm9090_set_bias_level(struct snd_soc_component *component,
enum snd_soc_bias_level level)
{
struct wm9090_priv *wm9090 = snd_soc_codec_get_drvdata(codec);
struct wm9090_priv *wm9090 = snd_soc_component_get_drvdata(component);
switch (level) {
case SND_SOC_BIAS_ON:
break;
case SND_SOC_BIAS_PREPARE:
snd_soc_update_bits(codec, WM9090_ANTIPOP2, WM9090_VMID_ENA,
snd_soc_component_update_bits(component, WM9090_ANTIPOP2, WM9090_VMID_ENA,
WM9090_VMID_ENA);
snd_soc_update_bits(codec, WM9090_POWER_MANAGEMENT_1,
snd_soc_component_update_bits(component, WM9090_POWER_MANAGEMENT_1,
WM9090_BIAS_ENA |
WM9090_VMID_RES_MASK,
WM9090_BIAS_ENA |
@ -493,7 +493,7 @@ static int wm9090_set_bias_level(struct snd_soc_codec *codec,
break;
case SND_SOC_BIAS_STANDBY:
if (snd_soc_codec_get_bias_level(codec) == SND_SOC_BIAS_OFF) {
if (snd_soc_component_get_bias_level(component) == SND_SOC_BIAS_OFF) {
/* Restore the register cache */
regcache_sync(wm9090->regmap);
}
@ -502,9 +502,9 @@ static int wm9090_set_bias_level(struct snd_soc_codec *codec,
* ground referenced outputs and class D speaker mean that
* latency is not an issue.
*/
snd_soc_update_bits(codec, WM9090_POWER_MANAGEMENT_1,
snd_soc_component_update_bits(component, WM9090_POWER_MANAGEMENT_1,
WM9090_BIAS_ENA | WM9090_VMID_RES_MASK, 0);
snd_soc_update_bits(codec, WM9090_ANTIPOP2,
snd_soc_component_update_bits(component, WM9090_ANTIPOP2,
WM9090_VMID_ENA, 0);
break;
@ -515,45 +515,49 @@ static int wm9090_set_bias_level(struct snd_soc_codec *codec,
return 0;
}
static int wm9090_probe(struct snd_soc_codec *codec)
static int wm9090_probe(struct snd_soc_component *component)
{
/* Configure some defaults; they will be written out when we
* bring the bias up.
*/
snd_soc_update_bits(codec, WM9090_IN1_LINE_INPUT_A_VOLUME,
snd_soc_component_update_bits(component, WM9090_IN1_LINE_INPUT_A_VOLUME,
WM9090_IN1_VU | WM9090_IN1A_ZC,
WM9090_IN1_VU | WM9090_IN1A_ZC);
snd_soc_update_bits(codec, WM9090_IN1_LINE_INPUT_B_VOLUME,
snd_soc_component_update_bits(component, WM9090_IN1_LINE_INPUT_B_VOLUME,
WM9090_IN1_VU | WM9090_IN1B_ZC,
WM9090_IN1_VU | WM9090_IN1B_ZC);
snd_soc_update_bits(codec, WM9090_IN2_LINE_INPUT_A_VOLUME,
snd_soc_component_update_bits(component, WM9090_IN2_LINE_INPUT_A_VOLUME,
WM9090_IN2_VU | WM9090_IN2A_ZC,
WM9090_IN2_VU | WM9090_IN2A_ZC);
snd_soc_update_bits(codec, WM9090_IN2_LINE_INPUT_B_VOLUME,
snd_soc_component_update_bits(component, WM9090_IN2_LINE_INPUT_B_VOLUME,
WM9090_IN2_VU | WM9090_IN2B_ZC,
WM9090_IN2_VU | WM9090_IN2B_ZC);
snd_soc_update_bits(codec, WM9090_SPEAKER_VOLUME_LEFT,
snd_soc_component_update_bits(component, WM9090_SPEAKER_VOLUME_LEFT,
WM9090_SPKOUT_VU | WM9090_SPKOUTL_ZC,
WM9090_SPKOUT_VU | WM9090_SPKOUTL_ZC);
snd_soc_update_bits(codec, WM9090_LEFT_OUTPUT_VOLUME,
snd_soc_component_update_bits(component, WM9090_LEFT_OUTPUT_VOLUME,
WM9090_HPOUT1_VU | WM9090_HPOUT1L_ZC,
WM9090_HPOUT1_VU | WM9090_HPOUT1L_ZC);
snd_soc_update_bits(codec, WM9090_RIGHT_OUTPUT_VOLUME,
snd_soc_component_update_bits(component, WM9090_RIGHT_OUTPUT_VOLUME,
WM9090_HPOUT1_VU | WM9090_HPOUT1R_ZC,
WM9090_HPOUT1_VU | WM9090_HPOUT1R_ZC);
snd_soc_update_bits(codec, WM9090_CLOCKING_1,
snd_soc_component_update_bits(component, WM9090_CLOCKING_1,
WM9090_TOCLK_ENA, WM9090_TOCLK_ENA);
wm9090_add_controls(codec);
wm9090_add_controls(component);
return 0;
}
static const struct snd_soc_codec_driver soc_codec_dev_wm9090 = {
.probe = wm9090_probe,
.set_bias_level = wm9090_set_bias_level,
.suspend_bias_off = true,
static const struct snd_soc_component_driver soc_component_dev_wm9090 = {
.probe = wm9090_probe,
.set_bias_level = wm9090_set_bias_level,
.suspend_bias_off = 1,
.idle_bias_on = 1,
.use_pmdown_time = 1,
.endianness = 1,
.non_legacy_dai_naming = 1,
};
static const struct regmap_config wm9090_regmap = {
@ -607,8 +611,8 @@ static int wm9090_i2c_probe(struct i2c_client *i2c,
i2c_set_clientdata(i2c, wm9090);
ret = snd_soc_register_codec(&i2c->dev,
&soc_codec_dev_wm9090, NULL, 0);
ret = devm_snd_soc_register_component(&i2c->dev,
&soc_component_dev_wm9090, NULL, 0);
if (ret != 0) {
dev_err(&i2c->dev, "Failed to register CODEC: %d\n", ret);
return ret;
@ -617,12 +621,6 @@ static int wm9090_i2c_probe(struct i2c_client *i2c,
return 0;
}
static int wm9090_i2c_remove(struct i2c_client *i2c)
{
snd_soc_unregister_codec(&i2c->dev);
return 0;
}
static const struct i2c_device_id wm9090_id[] = {
{ "wm9090", 0 },
{ "wm9093", 0 },
@ -635,7 +633,6 @@ static struct i2c_driver wm9090_i2c_driver = {
.name = "wm9090",
},
.probe = wm9090_i2c_probe,
.remove = wm9090_i2c_remove,
.id_table = wm9090_id,
};

View File

@ -226,7 +226,7 @@ static int wm9712_hp_mixer_put(struct snd_kcontrol *kcontrol,
struct soc_mixer_control *mc =
(struct soc_mixer_control *)kcontrol->private_value;
unsigned int mixer, mask, shift, old;
struct snd_soc_dapm_update update = { 0 };
struct snd_soc_dapm_update update = {};
bool change;
mixer = mc->shift >> 8;

View File

@ -235,7 +235,7 @@ static int wm9713_hp_mixer_put(struct snd_kcontrol *kcontrol,
struct soc_mixer_control *mc =
(struct soc_mixer_control *)kcontrol->private_value;
unsigned int mixer, mask, shift, old;
struct snd_soc_dapm_update update = { 0 };
struct snd_soc_dapm_update update = {};
bool change;
mixer = mc->shift >> 8;

View File

@ -1239,9 +1239,16 @@ static int wm_coeff_init_control_caches(struct wm_adsp *dsp)
if (ctl->flags & WMFW_CTL_FLAG_VOLATILE)
continue;
ret = wm_coeff_read_control(ctl, ctl->cache, ctl->len);
if (ret < 0)
return ret;
/*
* For readable controls populate the cache from the DSP memory.
* For non-readable controls the cache was zero-filled when
* created so we don't need to do anything.
*/
if (!ctl->flags || (ctl->flags & WMFW_CTL_FLAG_READABLE)) {
ret = wm_coeff_read_control(ctl, ctl->cache, ctl->len);
if (ret < 0)
return ret;
}
}
return 0;
@ -3253,6 +3260,13 @@ static int wm_adsp_buffer_populate(struct wm_adsp_compr_buf *buf)
return 0;
}
static void wm_adsp_buffer_clear(struct wm_adsp_compr_buf *buf)
{
buf->irq_count = 0xFFFFFFFF;
buf->read_index = -1;
buf->avail = 0;
}
static int wm_adsp_buffer_init(struct wm_adsp *dsp)
{
struct wm_adsp_compr_buf *buf;
@ -3263,8 +3277,8 @@ static int wm_adsp_buffer_init(struct wm_adsp *dsp)
return -ENOMEM;
buf->dsp = dsp;
buf->read_index = -1;
buf->irq_count = 0xFFFFFFFF;
wm_adsp_buffer_clear(buf);
ret = wm_adsp_buffer_locate(buf);
if (ret < 0) {
@ -3322,16 +3336,17 @@ int wm_adsp_compr_trigger(struct snd_compr_stream *stream, int cmd)
switch (cmd) {
case SNDRV_PCM_TRIGGER_START:
if (wm_adsp_compr_attached(compr))
break;
ret = wm_adsp_compr_attach(compr);
if (ret < 0) {
adsp_err(dsp, "Failed to link buffer and stream: %d\n",
ret);
break;
if (!wm_adsp_compr_attached(compr)) {
ret = wm_adsp_compr_attach(compr);
if (ret < 0) {
adsp_err(dsp, "Failed to link buffer and stream: %d\n",
ret);
break;
}
}
wm_adsp_buffer_clear(compr->buf);
/* Trigger the IRQ at one fragment of data */
ret = wm_adsp_buffer_write(compr->buf,
HOST_BUFFER_FIELD(high_water_mark),

View File

@ -64,10 +64,10 @@ struct wm_adsp {
struct regmap *regmap;
struct snd_soc_component *component;
int base;
int sysclk_reg;
int sysclk_mask;
int sysclk_shift;
unsigned int base;
unsigned int sysclk_reg;
unsigned int sysclk_mask;
unsigned int sysclk_shift;
struct list_head alg_regions;