mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-15 08:14:15 +08:00
ARM: SoC fixes for 3.13-rc
Another batch of fixes for ARM SoCs for 3.13. The diffstat is large,
mostly because of:
- Another set of fixes to fix regressions caused by moving OMAP from board
files to DT. Tony thinks this was the last major set of fixes, with
maybe just a few small patches to follow.
- More fixes for Marvell platforms, most dealing with misdescribed PCIe
hardware, i.e. incorrect number of busses on some SoCs, etc. The line
delta adds up due to various ranges moving around when this is fixed.
But there's also:
- Some smaller tweaks to defconfigs to make more boards bootable in my
test setup for better coverage.
- There are also a few other smaller fixes, a short series for at91, a couple
of reverts for ux500, etc.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQIcBAABAgAGBQJSnsLnAAoJEIwa5zzehBx3wzIP/0CmvZtGwhz2edhHK4k1iiqT
fqZl74aLrm6dHm41jvyr3lDcWkc+uFHP7HUDfCtA/y6iEjy2sOd8fQyTro+i6qnO
5wbTuyi4byHeBtKhIzrxG87Rny65i5MwszTtpCoNR166HGTP/M2lC2M0Qy44l+DD
3eRjpQ62ehlJ7jxtBDG8+9F22vaiDpy2R1hoGUtaOHZrG9j1Nlo19fjCVwVjq8f3
Varv3tKCEALmoMh4Dd+nqP62SFvMeve5z0NIcFTdXuqkGNCT1Cn4JSBr66JfzoMy
yqzewtZueb3oQQEpbPEWeuEikHiP2IdmHtp/8YrQMO8Q8/HOiusadV2spdx4z8ID
GdAjt4tlq36A5LOeP6o2vXg7UZ5T/14hFOodai0Avr6w5/xNvFUPOI0u5SABPjfA
bAjrtMl6iZUMhkuXxUNidrGWE+Juo+uJG0bLo9ikwu2vCi4LwzIrrMDeIfiLDQdy
fDFFZiihGBUui5sMqTE8OHTVMockrtAIUjGDAvnZ6nLF+Lpr5WRpIrUHgQKG4zyE
e6s5c6uzMlaSFzO7MFgznCnS6gxtolN0xH6d2CtkJGSUDC6soAb4hPNPHjWV6zFG
pfr8lfG8I88H0OBGNIYAQm3//bEj54awU3qQDtckVVwxWSjx56gR2VMQWZ+k0X8P
VyMIJx38II5EfwlP16hp
=PljB
-----END PGP SIGNATURE-----
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"Another batch of fixes for ARM SoCs for 3.13. The diffstat is large,
mostly because of:
- Another set of fixes to fix regressions caused by moving OMAP from
board files to DT. Tony thinks this was the last major set of
fixes, with maybe just a few small patches to follow.
- More fixes for Marvell platforms, most dealing with misdescribed
PCIe hardware, i.e. incorrect number of busses on some SoCs, etc.
The line delta adds up due to various ranges moving around when
this is fixed.
But there's also:
- Some smaller tweaks to defconfigs to make more boards bootable in
my test setup for better coverage.
- There are also a few other smaller fixes, a short series for at91,
a couple of reverts for ux500, etc"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (39 commits)
arm: dts: socfpga: Change some clocks of gate-clk type to perip-clk
arm: socfpga: Enable ARM_TWD for socfpga
ARM: multi_v7_defconfig: enable SDHCI_BCM_KONA and MMC_BLOCK_MINORS=16
ARM: sunxi_defconfig: enable NFS, TMPFS, PRINTK_TIME and nfsroot support
ARM: multi_v7_defconfig: enable network for BeagleBone Black
ARM: dts: Fix the name of supplies for smsc911x shared by OMAP
ARM: OMAP2+: Powerdomain: Fix unchecked dereference of arch_pwrdm
ARM: dts: omap3-beagle: Add omap-twl4030 audio support
ARM: dts: omap4-sdp: Fix pin muxing for wl12xx
ARM: dts: omap4-panda-common: Fix pin muxing for wl12xx
ARM: at91: fixed unresolved symbol "at91_pm_set_standby" when built without CONFIG_PM
ARM: at91: add usart3 alias to dtsi
ARM: at91: sama5d3: reduce TWI internal clock frequency
mmc: omap: Fix I2C dependency and make driver usable with device tree
mmc: omap: Fix DMA configuration to not rely on device id
ARM: dts: omap3-beagle: Fix USB host on beagle boards (for 3.13)
ARM: dts: omap3-igep0020: name twl4030 VPLL2 regulator as vdds_dsi
ARM: dts: AM33XX IGEP0033: add USB support
ARM: dts: AM33XX BASE0033: add 32KBit EEPROM support
ARM: dts: AM33XX BASE0033: add pinmux and user led support
...
This commit is contained in:
Linus Torvalds
commit
36059ee2ba
54
Documentation/devicetree/bindings/mmc/ti-omap.txt
Normal file
54
Documentation/devicetree/bindings/mmc/ti-omap.txt
Normal file
@ -0,0 +1,54 @@
|
||||
* TI MMC host controller for OMAP1 and 2420
|
||||
|
||||
The MMC Host Controller on TI OMAP1 and 2420 family provides
|
||||
an interface for MMC, SD, and SDIO types of memory cards.
|
||||
|
||||
This file documents differences between the core properties described
|
||||
by mmc.txt and the properties used by the omap mmc driver.
|
||||
|
||||
Note that this driver will not work with omap2430 or later omaps,
|
||||
please see the omap hsmmc driver for the current omaps.
|
||||
|
||||
Required properties:
|
||||
- compatible: Must be "ti,omap2420-mmc", for OMAP2420 controllers
|
||||
- ti,hwmods: For 2420, must be "msdi<n>", where n is controller
|
||||
instance starting 1
|
||||
|
||||
Examples:
|
||||
|
||||
msdi1: mmc@4809c000 {
|
||||
compatible = "ti,omap2420-mmc";
|
||||
ti,hwmods = "msdi1";
|
||||
reg = <0x4809c000 0x80>;
|
||||
interrupts = <83>;
|
||||
dmas = <&sdma 61 &sdma 62>;
|
||||
dma-names = "tx", "rx";
|
||||
};
|
||||
|
||||
* TI MMC host controller for OMAP1 and 2420
|
||||
|
||||
The MMC Host Controller on TI OMAP1 and 2420 family provides
|
||||
an interface for MMC, SD, and SDIO types of memory cards.
|
||||
|
||||
This file documents differences between the core properties described
|
||||
by mmc.txt and the properties used by the omap mmc driver.
|
||||
|
||||
Note that this driver will not work with omap2430 or later omaps,
|
||||
please see the omap hsmmc driver for the current omaps.
|
||||
|
||||
Required properties:
|
||||
- compatible: Must be "ti,omap2420-mmc", for OMAP2420 controllers
|
||||
- ti,hwmods: For 2420, must be "msdi<n>", where n is controller
|
||||
instance starting 1
|
||||
|
||||
Examples:
|
||||
|
||||
msdi1: mmc@4809c000 {
|
||||
compatible = "ti,omap2420-mmc";
|
||||
ti,hwmods = "msdi1";
|
||||
reg = <0x4809c000 0x80>;
|
||||
interrupts = <83>;
|
||||
dmas = <&sdma 61 &sdma 62>;
|
||||
dma-names = "tx", "rx";
|
||||
};
|
||||
|
||||
@ -13,4 +13,83 @@
|
||||
/ {
|
||||
model = "IGEP COM AM335x on AQUILA Expansion";
|
||||
compatible = "isee,am335x-base0033", "isee,am335x-igep0033", "ti,am33xx";
|
||||
|
||||
hdmi {
|
||||
compatible = "ti,tilcdc,slave";
|
||||
i2c = <&i2c0>;
|
||||
pinctrl-names = "default", "off";
|
||||
pinctrl-0 = <&nxp_hdmi_pins>;
|
||||
pinctrl-1 = <&nxp_hdmi_off_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
leds_base {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&leds_base_pins>;
|
||||
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led@0 {
|
||||
label = "base:red:user";
|
||||
gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; /* gpio1_21 */
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led@1 {
|
||||
label = "base:green:user";
|
||||
gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>; /* gpio2_0 */
|
||||
default-state = "off";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&am33xx_pinmux {
|
||||
nxp_hdmi_pins: pinmux_nxp_hdmi_pins {
|
||||
pinctrl-single,pins = <
|
||||
0x1b0 (PIN_OUTPUT | MUX_MODE3) /* xdma_event_intr0.clkout1 */
|
||||
0xa0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data0 */
|
||||
0xa4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data1 */
|
||||
0xa8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data2 */
|
||||
0xac (PIN_OUTPUT | MUX_MODE0) /* lcd_data3 */
|
||||
0xb0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data4 */
|
||||
0xb4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data5 */
|
||||
0xb8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data6 */
|
||||
0xbc (PIN_OUTPUT | MUX_MODE0) /* lcd_data7 */
|
||||
0xc0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data8 */
|
||||
0xc4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data9 */
|
||||
0xc8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data10 */
|
||||
0xcc (PIN_OUTPUT | MUX_MODE0) /* lcd_data11 */
|
||||
0xd0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data12 */
|
||||
0xd4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data13 */
|
||||
0xd8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data14 */
|
||||
0xdc (PIN_OUTPUT | MUX_MODE0) /* lcd_data15 */
|
||||
0xe0 (PIN_OUTPUT | MUX_MODE0) /* lcd_vsync */
|
||||
0xe4 (PIN_OUTPUT | MUX_MODE0) /* lcd_hsync */
|
||||
0xe8 (PIN_OUTPUT | MUX_MODE0) /* lcd_pclk */
|
||||
0xec (PIN_OUTPUT | MUX_MODE0) /* lcd_ac_bias_en */
|
||||
>;
|
||||
};
|
||||
nxp_hdmi_off_pins: pinmux_nxp_hdmi_off_pins {
|
||||
pinctrl-single,pins = <
|
||||
0x1b0 (PIN_OUTPUT | MUX_MODE3) /* xdma_event_intr0.clkout1 */
|
||||
>;
|
||||
};
|
||||
|
||||
leds_base_pins: pinmux_leds_base_pins {
|
||||
pinctrl-single,pins = <
|
||||
0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */
|
||||
0x88 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn3.gpio2_0 */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&lcdc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
eeprom: eeprom@50 {
|
||||
compatible = "at,24c256";
|
||||
reg = <0x50>;
|
||||
};
|
||||
};
|
||||
|
||||
@ -199,6 +199,35 @@
|
||||
pinctrl-0 = <&uart0_pins>;
|
||||
};
|
||||
|
||||
&usb {
|
||||
status = "okay";
|
||||
|
||||
control@44e10000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
usb-phy@47401300 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
usb-phy@47401b00 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
usb@47401000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
usb@47401800 {
|
||||
status = "okay";
|
||||
dr_mode = "host";
|
||||
};
|
||||
|
||||
dma-controller@07402000 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
#include "tps65910.dtsi"
|
||||
|
||||
&tps {
|
||||
|
||||
@ -99,22 +99,22 @@
|
||||
spi-max-frequency = <50000000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
pcie-controller {
|
||||
pcie-controller {
|
||||
status = "okay";
|
||||
/*
|
||||
* The two PCIe units are accessible through
|
||||
* both standard PCIe slots and mini-PCIe
|
||||
* slots on the board.
|
||||
*/
|
||||
pcie@1,0 {
|
||||
/* Port 0, Lane 0 */
|
||||
status = "okay";
|
||||
};
|
||||
pcie@2,0 {
|
||||
/* Port 1, Lane 0 */
|
||||
status = "okay";
|
||||
/*
|
||||
* The two PCIe units are accessible through
|
||||
* both standard PCIe slots and mini-PCIe
|
||||
* slots on the board.
|
||||
*/
|
||||
pcie@1,0 {
|
||||
/* Port 0, Lane 0 */
|
||||
status = "okay";
|
||||
};
|
||||
pcie@2,0 {
|
||||
/* Port 1, Lane 0 */
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
@ -118,7 +118,7 @@
|
||||
|
||||
coherency-fabric@20200 {
|
||||
compatible = "marvell,coherency-fabric";
|
||||
reg = <0x20200 0xb0>, <0x21810 0x1c>;
|
||||
reg = <0x20200 0xb0>, <0x21010 0x1c>;
|
||||
};
|
||||
|
||||
serial@12000 {
|
||||
|
||||
@ -47,7 +47,7 @@
|
||||
/*
|
||||
* MV78230 has 2 PCIe units Gen2.0: One unit can be
|
||||
* configured as x4 or quad x1 lanes. One unit is
|
||||
* x4/x1.
|
||||
* x1 only.
|
||||
*/
|
||||
pcie-controller {
|
||||
compatible = "marvell,armada-xp-pcie";
|
||||
@ -62,10 +62,10 @@
|
||||
|
||||
ranges =
|
||||
<0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 /* Port 0.0 registers */
|
||||
0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000 /* Port 2.0 registers */
|
||||
0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000 /* Port 0.1 registers */
|
||||
0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 /* Port 0.2 registers */
|
||||
0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000 /* Port 0.3 registers */
|
||||
0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000 /* Port 1.0 registers */
|
||||
0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
|
||||
0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */
|
||||
0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
|
||||
@ -74,8 +74,8 @@
|
||||
0x81000000 0x3 0 MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO */
|
||||
0x82000000 0x4 0 MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
|
||||
0x81000000 0x4 0 MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO */
|
||||
0x82000000 0x9 0 MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */
|
||||
0x81000000 0x9 0 MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO */>;
|
||||
0x82000000 0x5 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
|
||||
0x81000000 0x5 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */>;
|
||||
|
||||
pcie@1,0 {
|
||||
device_type = "pci";
|
||||
@ -145,20 +145,20 @@
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
pcie@9,0 {
|
||||
pcie@5,0 {
|
||||
device_type = "pci";
|
||||
assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
|
||||
reg = <0x4800 0 0 0 0>;
|
||||
assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
|
||||
reg = <0x2800 0 0 0 0>;
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
#interrupt-cells = <1>;
|
||||
ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
|
||||
0x81000000 0 0 0x81000000 0x9 0 1 0>;
|
||||
ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
|
||||
0x81000000 0 0 0x81000000 0x5 0 1 0>;
|
||||
interrupt-map-mask = <0 0 0 0>;
|
||||
interrupt-map = <0 0 0 0 &mpic 99>;
|
||||
marvell,pcie-port = <2>;
|
||||
interrupt-map = <0 0 0 0 &mpic 62>;
|
||||
marvell,pcie-port = <1>;
|
||||
marvell,pcie-lane = <0>;
|
||||
clocks = <&gateclk 26>;
|
||||
clocks = <&gateclk 9>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
@ -48,7 +48,7 @@
|
||||
/*
|
||||
* MV78260 has 3 PCIe units Gen2.0: Two units can be
|
||||
* configured as x4 or quad x1 lanes. One unit is
|
||||
* x4/x1.
|
||||
* x4 only.
|
||||
*/
|
||||
pcie-controller {
|
||||
compatible = "marvell,armada-xp-pcie";
|
||||
@ -68,7 +68,9 @@
|
||||
0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 /* Port 0.2 registers */
|
||||
0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000 /* Port 0.3 registers */
|
||||
0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000 /* Port 1.0 registers */
|
||||
0x82000000 0 0x82000 MBUS_ID(0xf0, 0x01) 0x82000 0 0x00002000 /* Port 3.0 registers */
|
||||
0x82000000 0 0x84000 MBUS_ID(0xf0, 0x01) 0x84000 0 0x00002000 /* Port 1.1 registers */
|
||||
0x82000000 0 0x88000 MBUS_ID(0xf0, 0x01) 0x88000 0 0x00002000 /* Port 1.2 registers */
|
||||
0x82000000 0 0x8c000 MBUS_ID(0xf0, 0x01) 0x8c000 0 0x00002000 /* Port 1.3 registers */
|
||||
0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
|
||||
0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */
|
||||
0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
|
||||
@ -77,10 +79,18 @@
|
||||
0x81000000 0x3 0 MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO */
|
||||
0x82000000 0x4 0 MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
|
||||
0x81000000 0x4 0 MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO */
|
||||
0x82000000 0x9 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
|
||||
0x81000000 0x9 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */
|
||||
0x82000000 0xa 0 MBUS_ID(0x08, 0xf8) 0 1 0 /* Port 3.0 MEM */
|
||||
0x81000000 0xa 0 MBUS_ID(0x08, 0xf0) 0 1 0 /* Port 3.0 IO */>;
|
||||
|
||||
0x82000000 0x5 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
|
||||
0x81000000 0x5 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */
|
||||
0x82000000 0x6 0 MBUS_ID(0x08, 0xd8) 0 1 0 /* Port 1.1 MEM */
|
||||
0x81000000 0x6 0 MBUS_ID(0x08, 0xd0) 0 1 0 /* Port 1.1 IO */
|
||||
0x82000000 0x7 0 MBUS_ID(0x08, 0xb8) 0 1 0 /* Port 1.2 MEM */
|
||||
0x81000000 0x7 0 MBUS_ID(0x08, 0xb0) 0 1 0 /* Port 1.2 IO */
|
||||
0x82000000 0x8 0 MBUS_ID(0x08, 0x78) 0 1 0 /* Port 1.3 MEM */
|
||||
0x81000000 0x8 0 MBUS_ID(0x08, 0x70) 0 1 0 /* Port 1.3 IO */
|
||||
|
||||
0x82000000 0x9 0 MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */
|
||||
0x81000000 0x9 0 MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO */>;
|
||||
|
||||
pcie@1,0 {
|
||||
device_type = "pci";
|
||||
@ -106,8 +116,8 @@
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
#interrupt-cells = <1>;
|
||||
ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
|
||||
0x81000000 0 0 0x81000000 0x2 0 1 0>;
|
||||
ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
|
||||
0x81000000 0 0 0x81000000 0x2 0 1 0>;
|
||||
interrupt-map-mask = <0 0 0 0>;
|
||||
interrupt-map = <0 0 0 0 &mpic 59>;
|
||||
marvell,pcie-port = <0>;
|
||||
@ -150,6 +160,74 @@
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
pcie@5,0 {
|
||||
device_type = "pci";
|
||||
assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
|
||||
reg = <0x2800 0 0 0 0>;
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
#interrupt-cells = <1>;
|
||||
ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
|
||||
0x81000000 0 0 0x81000000 0x5 0 1 0>;
|
||||
interrupt-map-mask = <0 0 0 0>;
|
||||
interrupt-map = <0 0 0 0 &mpic 62>;
|
||||
marvell,pcie-port = <1>;
|
||||
marvell,pcie-lane = <0>;
|
||||
clocks = <&gateclk 9>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
pcie@6,0 {
|
||||
device_type = "pci";
|
||||
assigned-addresses = <0x82000800 0 0x84000 0 0x2000>;
|
||||
reg = <0x3000 0 0 0 0>;
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
#interrupt-cells = <1>;
|
||||
ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0
|
||||
0x81000000 0 0 0x81000000 0x6 0 1 0>;
|
||||
interrupt-map-mask = <0 0 0 0>;
|
||||
interrupt-map = <0 0 0 0 &mpic 63>;
|
||||
marvell,pcie-port = <1>;
|
||||
marvell,pcie-lane = <1>;
|
||||
clocks = <&gateclk 10>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
pcie@7,0 {
|
||||
device_type = "pci";
|
||||
assigned-addresses = <0x82000800 0 0x88000 0 0x2000>;
|
||||
reg = <0x3800 0 0 0 0>;
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
#interrupt-cells = <1>;
|
||||
ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0
|
||||
0x81000000 0 0 0x81000000 0x7 0 1 0>;
|
||||
interrupt-map-mask = <0 0 0 0>;
|
||||
interrupt-map = <0 0 0 0 &mpic 64>;
|
||||
marvell,pcie-port = <1>;
|
||||
marvell,pcie-lane = <2>;
|
||||
clocks = <&gateclk 11>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
pcie@8,0 {
|
||||
device_type = "pci";
|
||||
assigned-addresses = <0x82000800 0 0x8c000 0 0x2000>;
|
||||
reg = <0x4000 0 0 0 0>;
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
#interrupt-cells = <1>;
|
||||
ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0
|
||||
0x81000000 0 0 0x81000000 0x8 0 1 0>;
|
||||
interrupt-map-mask = <0 0 0 0>;
|
||||
interrupt-map = <0 0 0 0 &mpic 65>;
|
||||
marvell,pcie-port = <1>;
|
||||
marvell,pcie-lane = <3>;
|
||||
clocks = <&gateclk 12>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
pcie@9,0 {
|
||||
device_type = "pci";
|
||||
assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
|
||||
@ -166,23 +244,6 @@
|
||||
clocks = <&gateclk 26>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
pcie@10,0 {
|
||||
device_type = "pci";
|
||||
assigned-addresses = <0x82000800 0 0x82000 0 0x2000>;
|
||||
reg = <0x5000 0 0 0 0>;
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
#interrupt-cells = <1>;
|
||||
ranges = <0x82000000 0 0 0x82000000 0xa 0 1 0
|
||||
0x81000000 0 0 0x81000000 0xa 0 1 0>;
|
||||
interrupt-map-mask = <0 0 0 0>;
|
||||
interrupt-map = <0 0 0 0 &mpic 103>;
|
||||
marvell,pcie-port = <3>;
|
||||
marvell,pcie-lane = <0>;
|
||||
clocks = <&gateclk 27>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
internal-regs {
|
||||
|
||||
@ -11,6 +11,10 @@
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
|
||||
/ {
|
||||
aliases {
|
||||
serial4 = &usart3;
|
||||
};
|
||||
|
||||
ahb {
|
||||
apb {
|
||||
pinctrl@fffff400 {
|
||||
|
||||
@ -44,8 +44,8 @@
|
||||
gpmc,wr-access-ns = <186>;
|
||||
gpmc,cycle2cycle-samecsen;
|
||||
gpmc,cycle2cycle-diffcsen;
|
||||
vmmc-supply = <&vddvario>;
|
||||
vmmc_aux-supply = <&vdd33a>;
|
||||
vddvario-supply = <&vddvario>;
|
||||
vdd33a-supply = <&vdd33a>;
|
||||
reg-io-width = <4>;
|
||||
smsc,save-mac-address;
|
||||
};
|
||||
|
||||
@ -215,3 +215,10 @@
|
||||
&usbhsehci {
|
||||
phys = <0 &hsusb2_phy>;
|
||||
};
|
||||
|
||||
&vaux2 {
|
||||
regulator-name = "usb_1v8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
@ -61,6 +61,14 @@
|
||||
vcc-supply = <&hsusb2_power>;
|
||||
};
|
||||
|
||||
sound {
|
||||
compatible = "ti,omap-twl4030";
|
||||
ti,model = "omap3beagle";
|
||||
|
||||
ti,mcbsp = <&mcbsp2>;
|
||||
ti,codec = <&twl_audio>;
|
||||
};
|
||||
|
||||
gpio_keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
@ -120,6 +128,12 @@
|
||||
reg = <0x48>;
|
||||
interrupts = <7>; /* SYS_NIRQ cascaded to intc */
|
||||
interrupt-parent = <&intc>;
|
||||
|
||||
twl_audio: audio {
|
||||
compatible = "ti,twl4030-audio";
|
||||
codec {
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
@ -178,3 +192,10 @@
|
||||
mode = <3>;
|
||||
power = <50>;
|
||||
};
|
||||
|
||||
&vaux2 {
|
||||
regulator-name = "vdd_ehci";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* Device Tree Source for IGEP Technology devices
|
||||
* Common device tree for IGEP boards based on AM/DM37x
|
||||
*
|
||||
* Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk>
|
||||
* Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
|
||||
@ -10,7 +10,7 @@
|
||||
*/
|
||||
/dts-v1/;
|
||||
|
||||
#include "omap34xx.dtsi"
|
||||
#include "omap36xx.dtsi"
|
||||
|
||||
/ {
|
||||
memory {
|
||||
@ -24,6 +24,25 @@
|
||||
ti,mcbsp = <&mcbsp2>;
|
||||
ti,codec = <&twl_audio>;
|
||||
};
|
||||
|
||||
vdd33: regulator-vdd33 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vdd33";
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
lbee1usjyc_vmmc: lbee1usjyc_vmmc {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&lbee1usjyc_pins>;
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "regulator-lbee1usjyc";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>; /* gpio_138 WIFI_PDN */
|
||||
startup-delay-us = <10000>;
|
||||
enable-active-high;
|
||||
vin-supply = <&vdd33>;
|
||||
};
|
||||
};
|
||||
|
||||
&omap3_pmx_core {
|
||||
@ -48,6 +67,15 @@
|
||||
>;
|
||||
};
|
||||
|
||||
/* WiFi/BT combo */
|
||||
lbee1usjyc_pins: pinmux_lbee1usjyc_pins {
|
||||
pinctrl-single,pins = <
|
||||
0x136 (PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat5.gpio_137 */
|
||||
0x138 (PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat6.gpio_138 */
|
||||
0x13a (PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat7.gpio_139 */
|
||||
>;
|
||||
};
|
||||
|
||||
mcbsp2_pins: pinmux_mcbsp2_pins {
|
||||
pinctrl-single,pins = <
|
||||
0x10c (PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx.mcbsp2_fsx */
|
||||
@ -65,10 +93,17 @@
|
||||
0x11a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
|
||||
0x11c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
|
||||
0x11e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
|
||||
0x120 (PIN_INPUT | MUX_MODE0) /* sdmmc1_dat4.sdmmc1_dat4 */
|
||||
0x122 (PIN_INPUT | MUX_MODE0) /* sdmmc1_dat5.sdmmc1_dat5 */
|
||||
0x124 (PIN_INPUT | MUX_MODE0) /* sdmmc1_dat6.sdmmc1_dat6 */
|
||||
0x126 (PIN_INPUT | MUX_MODE0) /* sdmmc1_dat7.sdmmc1_dat7 */
|
||||
>;
|
||||
};
|
||||
|
||||
mmc2_pins: pinmux_mmc2_pins {
|
||||
pinctrl-single,pins = <
|
||||
0x128 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */
|
||||
0x12a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */
|
||||
0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */
|
||||
0x12e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
|
||||
0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */
|
||||
0x132 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */
|
||||
>;
|
||||
};
|
||||
|
||||
@ -78,10 +113,33 @@
|
||||
>;
|
||||
};
|
||||
|
||||
i2c1_pins: pinmux_i2c1_pins {
|
||||
pinctrl-single,pins = <
|
||||
0x18a (PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */
|
||||
0x18c (PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */
|
||||
>;
|
||||
};
|
||||
|
||||
i2c2_pins: pinmux_i2c2_pins {
|
||||
pinctrl-single,pins = <
|
||||
0x18e (PIN_INPUT | MUX_MODE0) /* i2c2_scl.i2c2_scl */
|
||||
0x190 (PIN_INPUT | MUX_MODE0) /* i2c2_sda.i2c2_sda */
|
||||
>;
|
||||
};
|
||||
|
||||
i2c3_pins: pinmux_i2c3_pins {
|
||||
pinctrl-single,pins = <
|
||||
0x192 (PIN_INPUT | MUX_MODE0) /* i2c3_scl.i2c3_scl */
|
||||
0x194 (PIN_INPUT | MUX_MODE0) /* i2c3_sda.i2c3_sda */
|
||||
>;
|
||||
};
|
||||
|
||||
leds_pins: pinmux_leds_pins { };
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c1_pins>;
|
||||
clock-frequency = <2600000>;
|
||||
|
||||
twl: twl@48 {
|
||||
@ -101,9 +159,16 @@
|
||||
#include "twl4030_omap3.dtsi"
|
||||
|
||||
&i2c2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c2_pins>;
|
||||
clock-frequency = <400000>;
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c3_pins>;
|
||||
};
|
||||
|
||||
&mcbsp2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mcbsp2_pins>;
|
||||
@ -114,11 +179,15 @@
|
||||
pinctrl-0 = <&mmc1_pins>;
|
||||
vmmc-supply = <&vmmc1>;
|
||||
vmmc_aux-supply = <&vsim>;
|
||||
bus-width = <8>;
|
||||
bus-width = <4>;
|
||||
};
|
||||
|
||||
&mmc2 {
|
||||
status = "disabled";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mmc2_pins>;
|
||||
vmmc-supply = <&lbee1usjyc_vmmc>;
|
||||
bus-width = <4>;
|
||||
non-removable;
|
||||
};
|
||||
|
||||
&mmc3 {
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* Device Tree Source for IGEPv2 board
|
||||
* Device Tree Source for IGEPv2 Rev. (TI OMAP AM/DM37x)
|
||||
*
|
||||
* Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk>
|
||||
* Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
|
||||
@ -13,7 +13,7 @@
|
||||
#include "omap-gpmc-smsc911x.dtsi"
|
||||
|
||||
/ {
|
||||
model = "IGEPv2";
|
||||
model = "IGEPv2 (TI OMAP AM/DM37x)";
|
||||
compatible = "isee,omap3-igep0020", "ti,omap3";
|
||||
|
||||
leds {
|
||||
@ -67,6 +67,8 @@
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <
|
||||
&hsusbb1_pins
|
||||
&tfp410_pins
|
||||
&dss_pins
|
||||
>;
|
||||
|
||||
hsusbb1_pins: pinmux_hsusbb1_pins {
|
||||
@ -85,6 +87,45 @@
|
||||
0x5ba (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d7.hsusb1_data3 */
|
||||
>;
|
||||
};
|
||||
|
||||
tfp410_pins: tfp410_dvi_pins {
|
||||
pinctrl-single,pins = <
|
||||
0x196 (PIN_OUTPUT | MUX_MODE4) /* hdq_sio.gpio_170 */
|
||||
>;
|
||||
};
|
||||
|
||||
dss_pins: pinmux_dss_dvi_pins {
|
||||
pinctrl-single,pins = <
|
||||
0x0a4 (PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
|
||||
0x0a6 (PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
|
||||
0x0a8 (PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
|
||||
0x0aa (PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */
|
||||
0x0ac (PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */
|
||||
0x0ae (PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */
|
||||
0x0b0 (PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */
|
||||
0x0b2 (PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */
|
||||
0x0b4 (PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */
|
||||
0x0b6 (PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */
|
||||
0x0b8 (PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */
|
||||
0x0ba (PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */
|
||||
0x0bc (PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */
|
||||
0x0be (PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */
|
||||
0x0c0 (PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */
|
||||
0x0c2 (PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */
|
||||
0x0c4 (PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */
|
||||
0x0c6 (PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */
|
||||
0x0c8 (PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */
|
||||
0x0ca (PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */
|
||||
0x0cc (PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */
|
||||
0x0ce (PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */
|
||||
0x0d0 (PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */
|
||||
0x0d2 (PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */
|
||||
0x0d4 (PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */
|
||||
0x0d6 (PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */
|
||||
0x0d8 (PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */
|
||||
0x0da (PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&leds_pins {
|
||||
@ -174,3 +215,8 @@
|
||||
&usbhsehci {
|
||||
phys = <&hsusb1_phy>;
|
||||
};
|
||||
|
||||
&vpll2 {
|
||||
/* Needed for DSS */
|
||||
regulator-name = "vdds_dsi";
|
||||
};
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* Device Tree Source for IGEP COM Module
|
||||
* Device Tree Source for IGEP COM MODULE (TI OMAP AM/DM37x)
|
||||
*
|
||||
* Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk>
|
||||
* Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
|
||||
@ -12,7 +12,7 @@
|
||||
#include "omap3-igep.dtsi"
|
||||
|
||||
/ {
|
||||
model = "IGEP COM Module";
|
||||
model = "IGEP COM MODULE (TI OMAP AM/DM37x)";
|
||||
compatible = "isee,omap3-igep0030", "ti,omap3";
|
||||
|
||||
leds {
|
||||
|
||||
@ -125,6 +125,21 @@
|
||||
>;
|
||||
};
|
||||
|
||||
mmc2_pins: pinmux_mmc2_pins {
|
||||
pinctrl-single,pins = <
|
||||
0x128 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk */
|
||||
0x12a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd */
|
||||
0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0 */
|
||||
0x12e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1 */
|
||||
0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2 */
|
||||
0x132 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3 */
|
||||
0x134 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat4 */
|
||||
0x136 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat5 */
|
||||
0x138 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat6 */
|
||||
0x13a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat7 */
|
||||
>;
|
||||
};
|
||||
|
||||
display_pins: pinmux_display_pins {
|
||||
pinctrl-single,pins = <
|
||||
0x0d4 (PIN_OUTPUT | MUX_MODE4) /* RX51_LCD_RESET_GPIO */
|
||||
@ -358,8 +373,14 @@
|
||||
cd-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>; /* 160 */
|
||||
};
|
||||
|
||||
/* most boards use vaux3, only some old versions use vmmc2 instead */
|
||||
&mmc2 {
|
||||
status = "disabled";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mmc2_pins>;
|
||||
vmmc-supply = <&vaux3>;
|
||||
vmmc_aux-supply = <&vsim>;
|
||||
bus-width = <8>;
|
||||
non-removable;
|
||||
};
|
||||
|
||||
&mmc3 {
|
||||
|
||||
@ -82,6 +82,13 @@
|
||||
ranges;
|
||||
ti,hwmods = "l3_main";
|
||||
|
||||
aes: aes@480c5000 {
|
||||
compatible = "ti,omap3-aes";
|
||||
ti,hwmods = "aes";
|
||||
reg = <0x480c5000 0x50>;
|
||||
interrupts = <0>;
|
||||
};
|
||||
|
||||
counter32k: counter@48320000 {
|
||||
compatible = "ti,omap-counter32k";
|
||||
reg = <0x48320000 0x20>;
|
||||
@ -260,6 +267,13 @@
|
||||
ti,hwmods = "i2c3";
|
||||
};
|
||||
|
||||
mailbox: mailbox@48094000 {
|
||||
compatible = "ti,omap3-mailbox";
|
||||
ti,hwmods = "mailbox";
|
||||
reg = <0x48094000 0x200>;
|
||||
interrupts = <26>;
|
||||
};
|
||||
|
||||
mcspi1: spi@48098000 {
|
||||
compatible = "ti,omap2-mcspi";
|
||||
reg = <0x48098000 0x100>;
|
||||
@ -357,6 +371,13 @@
|
||||
dma-names = "tx", "rx";
|
||||
};
|
||||
|
||||
mmu_isp: mmu@480bd400 {
|
||||
compatible = "ti,omap3-mmu-isp";
|
||||
ti,hwmods = "mmu_isp";
|
||||
reg = <0x480bd400 0x80>;
|
||||
interrupts = <8>;
|
||||
};
|
||||
|
||||
wdt2: wdt@48314000 {
|
||||
compatible = "ti,omap3-wdt";
|
||||
reg = <0x48314000 0x80>;
|
||||
@ -442,6 +463,27 @@
|
||||
dma-names = "tx", "rx";
|
||||
};
|
||||
|
||||
sham: sham@480c3000 {
|
||||
compatible = "ti,omap3-sham";
|
||||
ti,hwmods = "sham";
|
||||
reg = <0x480c3000 0x64>;
|
||||
interrupts = <49>;
|
||||
};
|
||||
|
||||
smartreflex_core: smartreflex@480cb000 {
|
||||
compatible = "ti,omap3-smartreflex-core";
|
||||
ti,hwmods = "smartreflex_core";
|
||||
reg = <0x480cb000 0x400>;
|
||||
interrupts = <19>;
|
||||
};
|
||||
|
||||
smartreflex_mpu_iva: smartreflex@480c9000 {
|
||||
compatible = "ti,omap3-smartreflex-iva";
|
||||
ti,hwmods = "smartreflex_mpu_iva";
|
||||
reg = <0x480c9000 0x400>;
|
||||
interrupts = <18>;
|
||||
};
|
||||
|
||||
timer1: timer@48318000 {
|
||||
compatible = "ti,omap3430-timer";
|
||||
reg = <0x48318000 0x400>;
|
||||
|
||||
@ -246,15 +246,6 @@
|
||||
0xf0 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&omap4_pmx_wkup {
|
||||
led_wkgpio_pins: pinmux_leds_wkpins {
|
||||
pinctrl-single,pins = <
|
||||
0x1a (PIN_OUTPUT | MUX_MODE3) /* gpio_wk7 */
|
||||
0x1c (PIN_OUTPUT | MUX_MODE3) /* gpio_wk8 */
|
||||
>;
|
||||
};
|
||||
|
||||
/*
|
||||
* wl12xx GPIO outputs for WLAN_EN, BT_EN, FM_EN, BT_WAKEUP
|
||||
@ -274,7 +265,7 @@
|
||||
pinctrl-single,pins = <
|
||||
0x38 (PIN_INPUT | MUX_MODE3) /* gpmc_ncs2.gpio_52 */
|
||||
0x3a (PIN_INPUT | MUX_MODE3) /* gpmc_ncs3.gpio_53 */
|
||||
0x108 (PIN_OUTPUT | MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */
|
||||
0x108 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */
|
||||
0x10a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_cmd.sdmmc5_cmd */
|
||||
0x10c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat0.sdmmc5_dat0 */
|
||||
0x10e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat1.sdmmc5_dat1 */
|
||||
@ -284,6 +275,15 @@
|
||||
};
|
||||
};
|
||||
|
||||
&omap4_pmx_wkup {
|
||||
led_wkgpio_pins: pinmux_leds_wkpins {
|
||||
pinctrl-single,pins = <
|
||||
0x1a (PIN_OUTPUT | MUX_MODE3) /* gpio_wk7 */
|
||||
0x1c (PIN_OUTPUT | MUX_MODE3) /* gpio_wk8 */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c1_pins>;
|
||||
|
||||
@ -300,12 +300,12 @@
|
||||
wl12xx_pins: pinmux_wl12xx_pins {
|
||||
pinctrl-single,pins = <
|
||||
0x3a (PIN_INPUT | MUX_MODE3) /* gpmc_ncs3.gpio_53 */
|
||||
0x108 (PIN_OUTPUT | MUX_MODE3) /* sdmmc5_clk.sdmmc5_clk */
|
||||
0x10a (PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc5_cmd.sdmmc5_cmd */
|
||||
0x10c (PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc5_dat0.sdmmc5_dat0 */
|
||||
0x10e (PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc5_dat1.sdmmc5_dat1 */
|
||||
0x110 (PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc5_dat2.sdmmc5_dat2 */
|
||||
0x112 (PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc5_dat3.sdmmc5_dat3 */
|
||||
0x108 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */
|
||||
0x10a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_cmd.sdmmc5_cmd */
|
||||
0x10c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat0.sdmmc5_dat0 */
|
||||
0x10e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat1.sdmmc5_dat1 */
|
||||
0x110 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat2.sdmmc5_dat2 */
|
||||
0x112 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat3.sdmmc5_dat3 */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
@ -245,14 +245,14 @@
|
||||
|
||||
mpu_periph_clk: mpu_periph_clk {
|
||||
#clock-cells = <0>;
|
||||
compatible = "altr,socfpga-gate-clk";
|
||||
compatible = "altr,socfpga-perip-clk";
|
||||
clocks = <&mpuclk>;
|
||||
fixed-divider = <4>;
|
||||
};
|
||||
|
||||
mpu_l2_ram_clk: mpu_l2_ram_clk {
|
||||
#clock-cells = <0>;
|
||||
compatible = "altr,socfpga-gate-clk";
|
||||
compatible = "altr,socfpga-perip-clk";
|
||||
clocks = <&mpuclk>;
|
||||
fixed-divider = <2>;
|
||||
};
|
||||
@ -266,8 +266,9 @@
|
||||
|
||||
l3_main_clk: l3_main_clk {
|
||||
#clock-cells = <0>;
|
||||
compatible = "altr,socfpga-gate-clk";
|
||||
compatible = "altr,socfpga-perip-clk";
|
||||
clocks = <&mainclk>;
|
||||
fixed-divider = <1>;
|
||||
};
|
||||
|
||||
l3_mp_clk: l3_mp_clk {
|
||||
|
||||
@ -69,6 +69,7 @@ CONFIG_KS8851=y
|
||||
CONFIG_SMSC911X=y
|
||||
CONFIG_STMMAC_ETH=y
|
||||
CONFIG_MDIO_SUN4I=y
|
||||
CONFIG_TI_CPSW=y
|
||||
CONFIG_KEYBOARD_SPEAR=y
|
||||
CONFIG_SERIO_AMBAKMI=y
|
||||
CONFIG_SERIAL_8250=y
|
||||
@ -133,12 +134,14 @@ CONFIG_USB_GPIO_VBUS=y
|
||||
CONFIG_USB_ISP1301=y
|
||||
CONFIG_USB_MXS_PHY=y
|
||||
CONFIG_MMC=y
|
||||
CONFIG_MMC_BLOCK_MINORS=16
|
||||
CONFIG_MMC_ARMMMCI=y
|
||||
CONFIG_MMC_SDHCI=y
|
||||
CONFIG_MMC_SDHCI_PLTFM=y
|
||||
CONFIG_MMC_SDHCI_ESDHC_IMX=y
|
||||
CONFIG_MMC_SDHCI_TEGRA=y
|
||||
CONFIG_MMC_SDHCI_SPEAR=y
|
||||
CONFIG_MMC_SDHCI_BCM_KONA=y
|
||||
CONFIG_MMC_OMAP=y
|
||||
CONFIG_MMC_OMAP_HS=y
|
||||
CONFIG_EDAC=y
|
||||
|
||||
@ -173,6 +173,7 @@ CONFIG_MFD_PALMAS=y
|
||||
CONFIG_MFD_TPS65217=y
|
||||
CONFIG_MFD_TPS65910=y
|
||||
CONFIG_TWL6040_CORE=y
|
||||
CONFIG_REGULATOR_FIXED_VOLTAGE=y
|
||||
CONFIG_REGULATOR_PALMAS=y
|
||||
CONFIG_REGULATOR_TPS65023=y
|
||||
CONFIG_REGULATOR_TPS6507X=y
|
||||
|
||||
@ -12,6 +12,9 @@ CONFIG_NET=y
|
||||
CONFIG_PACKET=y
|
||||
CONFIG_UNIX=y
|
||||
CONFIG_INET=y
|
||||
CONFIG_IP_PNP=y
|
||||
CONFIG_IP_PNP_DHCP=y
|
||||
CONFIG_IP_PNP_BOOTP=y
|
||||
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
|
||||
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
|
||||
# CONFIG_INET_XFRM_MODE_BEET is not set
|
||||
@ -58,4 +61,8 @@ CONFIG_LEDS_TRIGGER_HEARTBEAT=y
|
||||
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
|
||||
CONFIG_COMMON_CLK_DEBUG=y
|
||||
# CONFIG_IOMMU_SUPPORT is not set
|
||||
CONFIG_TMPFS=y
|
||||
CONFIG_NFS_FS=y
|
||||
CONFIG_ROOT_NFS=y
|
||||
CONFIG_NLS=y
|
||||
CONFIG_PRINTK_TIME=y
|
||||
|
||||
@ -22,6 +22,7 @@ CONFIG_CMDLINE="root=/dev/ram0 console=ttyAMA2,115200n8"
|
||||
CONFIG_CPU_FREQ=y
|
||||
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
|
||||
CONFIG_CPU_IDLE=y
|
||||
CONFIG_ARM_U8500_CPUIDLE=y
|
||||
CONFIG_VFP=y
|
||||
CONFIG_NEON=y
|
||||
CONFIG_PM_RUNTIME=y
|
||||
@ -109,6 +110,8 @@ CONFIG_EXT2_FS_SECURITY=y
|
||||
CONFIG_EXT3_FS=y
|
||||
CONFIG_EXT4_FS=y
|
||||
CONFIG_VFAT_FS=y
|
||||
CONFIG_DEVTMPFS=y
|
||||
CONFIG_DEVTMPFS_MOUNT=y
|
||||
CONFIG_TMPFS=y
|
||||
CONFIG_TMPFS_POSIX_ACL=y
|
||||
# CONFIG_MISC_FILESYSTEMS is not set
|
||||
|
||||
@ -16,7 +16,11 @@
|
||||
#include <mach/at91_ramc.h>
|
||||
#include <mach/at91rm9200_sdramc.h>
|
||||
|
||||
#ifdef CONFIG_PM
|
||||
extern void at91_pm_set_standby(void (*at91_standby)(void));
|
||||
#else
|
||||
static inline void at91_pm_set_standby(void (*at91_standby)(void)) { }
|
||||
#endif
|
||||
|
||||
/*
|
||||
* The AT91RM9200 goes into self-refresh mode with this command, and will
|
||||
|
||||
@ -95,19 +95,19 @@ static struct clk twi0_clk = {
|
||||
.name = "twi0_clk",
|
||||
.pid = SAMA5D3_ID_TWI0,
|
||||
.type = CLK_TYPE_PERIPHERAL,
|
||||
.div = AT91_PMC_PCR_DIV2,
|
||||
.div = AT91_PMC_PCR_DIV8,
|
||||
};
|
||||
static struct clk twi1_clk = {
|
||||
.name = "twi1_clk",
|
||||
.pid = SAMA5D3_ID_TWI1,
|
||||
.type = CLK_TYPE_PERIPHERAL,
|
||||
.div = AT91_PMC_PCR_DIV2,
|
||||
.div = AT91_PMC_PCR_DIV8,
|
||||
};
|
||||
static struct clk twi2_clk = {
|
||||
.name = "twi2_clk",
|
||||
.pid = SAMA5D3_ID_TWI2,
|
||||
.type = CLK_TYPE_PERIPHERAL,
|
||||
.div = AT91_PMC_PCR_DIV2,
|
||||
.div = AT91_PMC_PCR_DIV8,
|
||||
};
|
||||
static struct clk mmc0_clk = {
|
||||
.name = "mci0_clk",
|
||||
|
||||
@ -223,7 +223,7 @@ void __init omap_4430sdp_display_init_of(void)
|
||||
static struct connector_dvi_platform_data omap3_igep2_dvi_connector_pdata = {
|
||||
.name = "dvi",
|
||||
.source = "tfp410.0",
|
||||
.i2c_bus_num = 3,
|
||||
.i2c_bus_num = 2,
|
||||
};
|
||||
|
||||
static struct platform_device omap3_igep2_dvi_connector_device = {
|
||||
|
||||
@ -139,6 +139,7 @@ struct of_dev_auxdata omap_auxdata_lookup[] __initdata = {
|
||||
|
||||
static struct pdata_init pdata_quirks[] __initdata = {
|
||||
#ifdef CONFIG_ARCH_OMAP3
|
||||
{ "nokia,omap3-n900", hsmmc2_internal_input_clk, },
|
||||
{ "nokia,omap3-n9", hsmmc2_internal_input_clk, },
|
||||
{ "nokia,omap3-n950", hsmmc2_internal_input_clk, },
|
||||
{ "isee,omap3-igep0020", omap3_igep0020_legacy_init, },
|
||||
|
||||
@ -128,7 +128,8 @@ skip_voltdm:
|
||||
for (i = 0; i < pwrdm->banks; i++)
|
||||
pwrdm->ret_mem_off_counter[i] = 0;
|
||||
|
||||
arch_pwrdm->pwrdm_wait_transition(pwrdm);
|
||||
if (arch_pwrdm && arch_pwrdm->pwrdm_wait_transition)
|
||||
arch_pwrdm->pwrdm_wait_transition(pwrdm);
|
||||
pwrdm->state = pwrdm_read_pwrst(pwrdm);
|
||||
pwrdm->state_counter[pwrdm->state] = 1;
|
||||
|
||||
|
||||
@ -10,6 +10,7 @@ config ARCH_SOCFPGA
|
||||
select GENERIC_CLOCKEVENTS
|
||||
select GPIO_PL061 if GPIOLIB
|
||||
select HAVE_ARM_SCU
|
||||
select HAVE_ARM_TWD if SMP
|
||||
select HAVE_SMP
|
||||
select MFD_SYSCON
|
||||
select SPARSE_IRQ
|
||||
|
||||
@ -140,6 +140,10 @@ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
|
||||
/* Requires call-back bindings. */
|
||||
OF_DEV_AUXDATA("arm,cortex-a9-pmu", 0, "arm-pmu", &db8500_pmu_platdata),
|
||||
/* Requires DMA bindings. */
|
||||
OF_DEV_AUXDATA("arm,pl18x", 0x80126000, "sdi0", &mop500_sdi0_data),
|
||||
OF_DEV_AUXDATA("arm,pl18x", 0x80118000, "sdi1", &mop500_sdi1_data),
|
||||
OF_DEV_AUXDATA("arm,pl18x", 0x80005000, "sdi2", &mop500_sdi2_data),
|
||||
OF_DEV_AUXDATA("arm,pl18x", 0x80114000, "sdi4", &mop500_sdi4_data),
|
||||
OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80123000,
|
||||
"ux500-msp-i2s.0", &msp0_platform_data),
|
||||
OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80124000,
|
||||
|
||||
@ -336,8 +336,11 @@ static inline void __omap_dm_timer_enable_posted(struct omap_dm_timer *timer)
|
||||
if (timer->posted)
|
||||
return;
|
||||
|
||||
if (timer->errata & OMAP_TIMER_ERRATA_I103_I767)
|
||||
if (timer->errata & OMAP_TIMER_ERRATA_I103_I767) {
|
||||
timer->posted = OMAP_TIMER_NONPOSTED;
|
||||
__omap_dm_timer_write(timer, OMAP_TIMER_IF_CTRL_REG, 0, 0);
|
||||
return;
|
||||
}
|
||||
|
||||
__omap_dm_timer_write(timer, OMAP_TIMER_IF_CTRL_REG,
|
||||
OMAP_TIMER_CTRL_POSTED, 0);
|
||||
|
||||
@ -22,6 +22,7 @@
|
||||
#include <linux/delay.h>
|
||||
#include <linux/spinlock.h>
|
||||
#include <linux/timer.h>
|
||||
#include <linux/of.h>
|
||||
#include <linux/omap-dma.h>
|
||||
#include <linux/mmc/host.h>
|
||||
#include <linux/mmc/card.h>
|
||||
@ -90,17 +91,6 @@
|
||||
#define OMAP_MMC_CMDTYPE_AC 2
|
||||
#define OMAP_MMC_CMDTYPE_ADTC 3
|
||||
|
||||
#define OMAP_DMA_MMC_TX 21
|
||||
#define OMAP_DMA_MMC_RX 22
|
||||
#define OMAP_DMA_MMC2_TX 54
|
||||
#define OMAP_DMA_MMC2_RX 55
|
||||
|
||||
#define OMAP24XX_DMA_MMC2_TX 47
|
||||
#define OMAP24XX_DMA_MMC2_RX 48
|
||||
#define OMAP24XX_DMA_MMC1_TX 61
|
||||
#define OMAP24XX_DMA_MMC1_RX 62
|
||||
|
||||
|
||||
#define DRIVER_NAME "mmci-omap"
|
||||
|
||||
/* Specifies how often in millisecs to poll for card status changes
|
||||
@ -1330,7 +1320,7 @@ static int mmc_omap_probe(struct platform_device *pdev)
|
||||
struct mmc_omap_host *host = NULL;
|
||||
struct resource *res;
|
||||
dma_cap_mask_t mask;
|
||||
unsigned sig;
|
||||
unsigned sig = 0;
|
||||
int i, ret = 0;
|
||||
int irq;
|
||||
|
||||
@ -1340,7 +1330,7 @@ static int mmc_omap_probe(struct platform_device *pdev)
|
||||
}
|
||||
if (pdata->nr_slots == 0) {
|
||||
dev_err(&pdev->dev, "no slots\n");
|
||||
return -ENXIO;
|
||||
return -EPROBE_DEFER;
|
||||
}
|
||||
|
||||
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
||||
@ -1407,19 +1397,20 @@ static int mmc_omap_probe(struct platform_device *pdev)
|
||||
host->dma_tx_burst = -1;
|
||||
host->dma_rx_burst = -1;
|
||||
|
||||
if (mmc_omap2())
|
||||
sig = host->id == 0 ? OMAP24XX_DMA_MMC1_TX : OMAP24XX_DMA_MMC2_TX;
|
||||
else
|
||||
sig = host->id == 0 ? OMAP_DMA_MMC_TX : OMAP_DMA_MMC2_TX;
|
||||
host->dma_tx = dma_request_channel(mask, omap_dma_filter_fn, &sig);
|
||||
res = platform_get_resource_byname(pdev, IORESOURCE_DMA, "tx");
|
||||
if (res)
|
||||
sig = res->start;
|
||||
host->dma_tx = dma_request_slave_channel_compat(mask,
|
||||
omap_dma_filter_fn, &sig, &pdev->dev, "tx");
|
||||
if (!host->dma_tx)
|
||||
dev_warn(host->dev, "unable to obtain TX DMA engine channel %u\n",
|
||||
sig);
|
||||
if (mmc_omap2())
|
||||
sig = host->id == 0 ? OMAP24XX_DMA_MMC1_RX : OMAP24XX_DMA_MMC2_RX;
|
||||
else
|
||||
sig = host->id == 0 ? OMAP_DMA_MMC_RX : OMAP_DMA_MMC2_RX;
|
||||
host->dma_rx = dma_request_channel(mask, omap_dma_filter_fn, &sig);
|
||||
|
||||
res = platform_get_resource_byname(pdev, IORESOURCE_DMA, "rx");
|
||||
if (res)
|
||||
sig = res->start;
|
||||
host->dma_rx = dma_request_slave_channel_compat(mask,
|
||||
omap_dma_filter_fn, &sig, &pdev->dev, "rx");
|
||||
if (!host->dma_rx)
|
||||
dev_warn(host->dev, "unable to obtain RX DMA engine channel %u\n",
|
||||
sig);
|
||||
@ -1512,12 +1503,20 @@ static int mmc_omap_remove(struct platform_device *pdev)
|
||||
return 0;
|
||||
}
|
||||
|
||||
#if IS_BUILTIN(CONFIG_OF)
|
||||
static const struct of_device_id mmc_omap_match[] = {
|
||||
{ .compatible = "ti,omap2420-mmc", },
|
||||
{ },
|
||||
};
|
||||
#endif
|
||||
|
||||
static struct platform_driver mmc_omap_driver = {
|
||||
.probe = mmc_omap_probe,
|
||||
.remove = mmc_omap_remove,
|
||||
.driver = {
|
||||
.name = DRIVER_NAME,
|
||||
.owner = THIS_MODULE,
|
||||
.of_match_table = of_match_ptr(mmc_omap_match),
|
||||
},
|
||||
};
|
||||
|
||||
|
||||
Loading…
Reference in New Issue
Block a user