korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-11-11 12:28:41 +08:00
Code Issues Packages Projects Releases Wiki Activity

USB: changes for v5.2 merge window

Browse Source 
With a total of 50 non-merge commits, this is not a large pull
 request. Most of the changes are, again, in dwc2 (37%) and dwc3 (32%)
 with the rest of it scattered among other UDCs, function drivers and
 device-tree bindings.
 
 No really big feature this time around apart from support to Amlogic
 being added to both dwc3 and dwc2 drivers.
 -----BEGIN PGP SIGNATURE-----
 
 iQJRBAABCAA7FiEElLzh7wn96CXwjh2IzL64meEamQYFAlzMBPsdHGZlbGlwZS5i
 YWxiaUBsaW51eC5pbnRlbC5jb20ACgkQzL64meEamQZZ5RAAtYw++SU5+K8n9M5m
 IH+dooCgKc1ZGTmqEI7PRLQBllSMqTjOIByGd9sdsqzSp+rCToYNF0St6t2e+5oU
 oh+El2HNYJU6OSApiQaUya9lgDFWw0O0hXrWQ131LArVfrPNSrk7TQXxL5s7wGPG
 M33fa48YQ+xkPQ8w2/FQWddJgBmB9qScXrCNueheI9JZuU//Wvjpfrq+lzxI50wA
 7qpqVFw/fJwLXltwEogeuzHwVd+Y/nTL4EpG5iluRqzoH72VwKlCqAwRPvyi0bnY
 i8gZQo2K8DBQeJqr6VMfDfWowMbINs9rL1un0mR1ci1O2PSoraluZcvzrY7s7gG3
 F4rf3K/6dsnsE3PIYvAfzjug8g4luuVya0V4j1X2U7lGshLY0xHe+RSbG5QPWm/p
 TlXHN16Cs3t/C/dc1TxyuoKzysABBPC1rQT/0GhHpKz308UFW3z8UVAK54WiaFV7
 X0bpC2AI7nc7igi4YMho4PoOAUqPgvX7G7ODxQbPLSvhWi3+K4Ih1684gHr0Gopv
 cHj1TLh17RaQ8o35AADHEC7iDyU+tmeIVzMm+VWzrgwE3NM1ebjd7hEUoS+iUAUt
 MwOaCHAaCQWRUTrIjQr75OO/j+WaJwkISJODLmJGZ1Jrj7o15WUUVOEqkqLOqE1c
 upNsdzzva5W19t/m56Qb1AowvIw=
 =k1p8
 -----END PGP SIGNATURE-----

Merge tag 'usb-for-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

Felipe writes:

USB: changes for v5.2 merge window

With a total of 50 non-merge commits, this is not a large pull
request. Most of the changes are, again, in dwc2 (37%) and dwc3 (32%)
with the rest of it scattered among other UDCs, function drivers and
device-tree bindings.

No really big feature this time around apart from support to Amlogic
being added to both dwc3 and dwc2 drivers.

* tag 'usb-for-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (50 commits)
  usb: dwc3: Rename DWC3_DCTL_LPM_ERRATA
  usb: dwc3: Fix default lpm_nyet_threshold value
  usb: dwc3: debug: Print GET_STATUS(device) tracepoint
  usb: dwc3: Do core validation early on probe
  usb: dwc3: gadget: Set lpm_capable
  usb: gadget: atmel: tie wake lock to running clock
  usb: gadget: atmel: support USB suspend
  usb: gadget: atmel_usba_udc: simplify setting of interrupt-enabled mask
  dwc2: gadget: Fix completed transfer size calculation in DDMA
  usb: dwc2: Set lpm mode parameters depend on HW configuration
  usb: dwc2: Fix channel disable flow
  usb: dwc2: Set actual frame number for completed ISOC transfer
  usb: gadget: do not use __constant_cpu_to_le16
  usb: dwc2: gadget: Increase descriptors count for ISOC's
  usb: introduce usb_ep_type_string() function
  usb: dwc3: move synchronize_irq() out of the spinlock protected block
  usb: dwc3: Free resource immediately after use
  usb: dwc3: of-simple: Convert to bulk clk API
  usb: dwc2: Delayed status support
  usb: gadget: udc: lpc32xx: rework interrupt handling
  ...
This commit is contained in:
Greg Kroah-Hartman 2019-05-03 18:05:27 +02:00
commit 3515468a87
32 changed files with 1381 additions and 527 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

88
Documentation/devicetree/bindings/usb/amlogic,dwc3.txt
View File

@ -40,3 +40,91 @@ Example device nodes:
phy-names = "usb2-phy", "usb3-phy";
};
};
Amlogic Meson G12A DWC3 USB SoC Controller Glue
The Amlogic G12A embeds a DWC3 USB IP Core configured for USB2 and USB3
in host-only mode, and a DWC2 IP Core configured for USB2 peripheral mode
only.
A glue connects the DWC3 core to USB2 PHYs and optionnaly to an USB3 PHY.
One of the USB2 PHY can be re-routed in peripheral mode to a DWC2 USB IP.
The DWC3 Glue controls the PHY routing and power, an interrupt line is
connected to the Glue to serve as OTG ID change detection.
Required properties:
- compatible: Should be "amlogic,meson-g12a-usb-ctrl"
- clocks: a handle for the "USB" clock
- resets: a handle for the shared "USB" reset line
- reg: The base address and length of the registers
- interrupts: the interrupt specifier for the OTG detection
- phys: handle to used PHYs on the system
- a <0> phandle can be used if a PHY is not used
- phy-names: names of the used PHYs on the system :
- "usb2-phy0" for USB2 PHY0 if USBHOST_A port is used
- "usb2-phy1" for USB2 PHY1 if USBOTG_B port is used
- "usb3-phy0" for USB3 PHY if USB3_0 is used
- dr_mode: should be "host", "peripheral", or "otg" depending on
the usage and configuration of the OTG Capable port.
- "host" and "peripheral" means a fixed Host or Device only connection
- "otg" means the port can be used as both Host or Device and
be switched automatically using the OTG ID pin.
Optional properties:
- vbus-supply: should be a phandle to the regulator controlling the VBUS
power supply when used in OTG switchable mode
Required child nodes:
A child node must exist to represent the core DWC3 IP block. The name of
the node is not important. The content of the node is defined in dwc3.txt.
A child node must exist to represent the core DWC2 IP block. The name of
the node is not important. The content of the node is defined in dwc2.txt.
PHY documentation is provided in the following places:
- Documentation/devicetree/bindings/phy/meson-g12a-usb2-phy.txt
- Documentation/devicetree/bindings/phy/meson-g12a-usb3-pcie-phy.txt
Example device nodes:
usb: usb@ffe09000 {
compatible = "amlogic,meson-g12a-usb-ctrl";
reg = <0x0 0xffe09000 0x0 0xa0>;
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <2>;
#size-cells = <2>;
ranges;
clocks = <&clkc CLKID_USB>;
resets = <&reset RESET_USB>;
dr_mode = "otg";
phys = <&usb2_phy0>, <&usb2_phy1>,
<&usb3_pcie_phy PHY_TYPE_USB3>;
phy-names = "usb2-phy0", "usb2-phy1", "usb3-phy0";
dwc2: usb@ff400000 {
compatible = "amlogic,meson-g12a-usb", "snps,dwc2";
reg = <0x0 0xff400000 0x0 0x40000>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clkc CLKID_USB1_DDR_BRIDGE>;
clock-names = "ddr";
phys = <&usb2_phy1>;
dr_mode = "peripheral";
g-rx-fifo-size = <192>;
g-np-tx-fifo-size = <128>;
g-tx-fifo-size = <128 128 16 16 16>;
};
dwc3: usb@ff500000 {
compatible = "snps,dwc3";
reg = <0x0 0xff500000 0x0 0x100000>;
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
dr_mode = "host";
snps,dis_u2_susphy_quirk;
snps,quirk-frame-length-adjustment;
};
};

7
Documentation/devicetree/bindings/usb/dwc2.txt
View File

@ -14,6 +14,7 @@ Required properties:
- "amlogic,meson8-usb": The DWC2 USB controller instance in Amlogic Meson8 SoCs;
- "amlogic,meson8b-usb": The DWC2 USB controller instance in Amlogic Meson8b SoCs;
- "amlogic,meson-gxbb-usb": The DWC2 USB controller instance in Amlogic S905 SoCs;
- "amlogic,meson-g12a-usb": The DWC2 USB controller instance in Amlogic G12A SoCs;
- "amcc,dwc-otg": The DWC2 USB controller instance in AMCC Canyonlands 460EX SoCs;
- snps,dwc2: A generic DWC2 USB controller with default parameters.
- "st,stm32f4x9-fsotg": The DWC2 USB FS/HS controller instance in STM32F4x9 SoCs
@ -31,12 +32,18 @@ Refer to clk/clock-bindings.txt for generic clock consumer properties
Optional properties:
- phys: phy provider specifier
- phy-names: shall be "usb2-phy"
- vbus-supply: reference to the VBUS regulator. Depending on the current mode
this is enabled (in "host" mode") or disabled (in "peripheral" mode). The
regulator is updated if the controller is configured in "otg" mode and the
status changes between "host" and "peripheral".
Refer to phy/phy-bindings.txt for generic phy consumer properties
- dr_mode: shall be one of "host", "peripheral" and "otg"
Refer to usb/generic.txt
- g-rx-fifo-size: size of rx fifo size in gadget mode.
- g-np-tx-fifo-size: size of non-periodic tx fifo size in gadget mode.
- g-tx-fifo-size: size of periodic tx fifo per endpoint (except ep0) in gadget mode.
- snps,reset-phy-on-wake: If present indicates that we need to reset the PHY when
we detect a wakeup. This is due to a hardware errata.
Deprecated properties:
- g-use-dma: gadget DMA mode is automatically detected

7
arch/arm/boot/dts/rk3288.dtsi
View File

@ -616,6 +616,7 @@
dr_mode = "host";
phys = <&usbphy2>;
phy-names = "usb2-phy";
snps,reset-phy-on-wake;
status = "disabled";
};
@ -904,6 +905,8 @@
clocks = <&cru SCLK_OTGPHY0>;
clock-names = "phyclk";
#clock-cells = <0>;
resets = <&cru SRST_USBOTG_PHY>;
reset-names = "phy-reset";
};
usbphy1: usb-phy@334 {
@ -912,6 +915,8 @@
clocks = <&cru SCLK_OTGPHY1>;
clock-names = "phyclk";
#clock-cells = <0>;
resets = <&cru SRST_USBHOST0_PHY>;
reset-names = "phy-reset";
};
usbphy2: usb-phy@348 {
@ -920,6 +925,8 @@
clocks = <&cru SCLK_OTGPHY2>;
clock-names = "phyclk";
#clock-cells = <0>;
resets = <&cru SRST_USBHOST1_PHY>;
reset-names = "phy-reset";
};
};
};

7
drivers/usb/core/hub.c
View File

@ -3174,13 +3174,14 @@ static int usb_disable_remote_wakeup(struct usb_device *udev)
}
/* Count of wakeup-enabled devices at or below udev */
static unsigned wakeup_enabled_descendants(struct usb_device *udev)
unsigned usb_wakeup_enabled_descendants(struct usb_device *udev)
{
struct usb_hub *hub = usb_hub_to_struct_hub(udev);
return udev->do_remote_wakeup +
(hub ? hub->wakeup_enabled_descendants : 0);
}
EXPORT_SYMBOL_GPL(usb_wakeup_enabled_descendants);
/*
* usb_port_suspend - suspend a usb device's upstream port
@ -3282,7 +3283,7 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg)
* Therefore we will turn on the suspend feature if udev or any of its
* descendants is enabled for remote wakeup.
*/
else if (PMSG_IS_AUTO(msg) || wakeup_enabled_descendants(udev) > 0)
else if (PMSG_IS_AUTO(msg) || usb_wakeup_enabled_descendants(udev) > 0)
status = set_port_feature(hub->hdev, port1,
USB_PORT_FEAT_SUSPEND);
else {
@ -3686,7 +3687,7 @@ static int hub_suspend(struct usb_interface *intf, pm_message_t msg)
}
if (udev)
hub->wakeup_enabled_descendants +=
wakeup_enabled_descendants(udev);
usb_wakeup_enabled_descendants(udev);
}
if (hdev->do_remote_wakeup && hub->quirk_check_port_auto_suspend) {

199
drivers/usb/dwc2/core.c
View File

@ -1020,6 +1020,205 @@ int dwc2_hsotg_wait_bit_clear(struct dwc2_hsotg *hsotg, u32 offset, u32 mask,
return -ETIMEDOUT;
}
/*
* Initializes the FSLSPClkSel field of the HCFG register depending on the
* PHY type
*/
void dwc2_init_fs_ls_pclk_sel(struct dwc2_hsotg *hsotg)
{
u32 hcfg, val;
if ((hsotg->hw_params.hs_phy_type == GHWCFG2_HS_PHY_TYPE_ULPI &&
hsotg->hw_params.fs_phy_type == GHWCFG2_FS_PHY_TYPE_DEDICATED &&
hsotg->params.ulpi_fs_ls) ||
hsotg->params.phy_type == DWC2_PHY_TYPE_PARAM_FS) {
/* Full speed PHY */
val = HCFG_FSLSPCLKSEL_48_MHZ;
} else {
/* High speed PHY running at full speed or high speed */
val = HCFG_FSLSPCLKSEL_30_60_MHZ;
}
dev_dbg(hsotg->dev, "Initializing HCFG.FSLSPClkSel to %08x\n", val);
hcfg = dwc2_readl(hsotg, HCFG);
hcfg &= ~HCFG_FSLSPCLKSEL_MASK;
hcfg |= val << HCFG_FSLSPCLKSEL_SHIFT;
dwc2_writel(hsotg, hcfg, HCFG);
}
static int dwc2_fs_phy_init(struct dwc2_hsotg *hsotg, bool select_phy)
{
u32 usbcfg, ggpio, i2cctl;
int retval = 0;
/*
* core_init() is now called on every switch so only call the
* following for the first time through
*/
if (select_phy) {
dev_dbg(hsotg->dev, "FS PHY selected\n");
usbcfg = dwc2_readl(hsotg, GUSBCFG);
if (!(usbcfg & GUSBCFG_PHYSEL)) {
usbcfg |= GUSBCFG_PHYSEL;
dwc2_writel(hsotg, usbcfg, GUSBCFG);
/* Reset after a PHY select */
retval = dwc2_core_reset(hsotg, false);
if (retval) {
dev_err(hsotg->dev,
"%s: Reset failed, aborting", __func__);
return retval;
}
}
if (hsotg->params.activate_stm_fs_transceiver) {
ggpio = dwc2_readl(hsotg, GGPIO);
if (!(ggpio & GGPIO_STM32_OTG_GCCFG_PWRDWN)) {
dev_dbg(hsotg->dev, "Activating transceiver\n");
/*
* STM32F4x9 uses the GGPIO register as general
* core configuration register.
*/
ggpio |= GGPIO_STM32_OTG_GCCFG_PWRDWN;
dwc2_writel(hsotg, ggpio, GGPIO);
}
}
}
/*
* Program DCFG.DevSpd or HCFG.FSLSPclkSel to 48Mhz in FS. Also
* do this on HNP Dev/Host mode switches (done in dev_init and
* host_init).
*/
if (dwc2_is_host_mode(hsotg))
dwc2_init_fs_ls_pclk_sel(hsotg);
if (hsotg->params.i2c_enable) {
dev_dbg(hsotg->dev, "FS PHY enabling I2C\n");
/* Program GUSBCFG.OtgUtmiFsSel to I2C */
usbcfg = dwc2_readl(hsotg, GUSBCFG);
usbcfg |= GUSBCFG_OTG_UTMI_FS_SEL;
dwc2_writel(hsotg, usbcfg, GUSBCFG);
/* Program GI2CCTL.I2CEn */
i2cctl = dwc2_readl(hsotg, GI2CCTL);
i2cctl &= ~GI2CCTL_I2CDEVADDR_MASK;
i2cctl |= 1 << GI2CCTL_I2CDEVADDR_SHIFT;
i2cctl &= ~GI2CCTL_I2CEN;
dwc2_writel(hsotg, i2cctl, GI2CCTL);
i2cctl |= GI2CCTL_I2CEN;
dwc2_writel(hsotg, i2cctl, GI2CCTL);
}
return retval;
}
static int dwc2_hs_phy_init(struct dwc2_hsotg *hsotg, bool select_phy)
{
u32 usbcfg, usbcfg_old;
int retval = 0;
if (!select_phy)
return 0;
usbcfg = dwc2_readl(hsotg, GUSBCFG);
usbcfg_old = usbcfg;
/*
* HS PHY parameters. These parameters are preserved during soft reset
* so only program the first time. Do a soft reset immediately after
* setting phyif.
*/
switch (hsotg->params.phy_type) {
case DWC2_PHY_TYPE_PARAM_ULPI:
/* ULPI interface */
dev_dbg(hsotg->dev, "HS ULPI PHY selected\n");
usbcfg |= GUSBCFG_ULPI_UTMI_SEL;
usbcfg &= ~(GUSBCFG_PHYIF16 | GUSBCFG_DDRSEL);
if (hsotg->params.phy_ulpi_ddr)
usbcfg |= GUSBCFG_DDRSEL;
/* Set external VBUS indicator as needed. */
if (hsotg->params.oc_disable)
usbcfg |= (GUSBCFG_ULPI_INT_VBUS_IND |
GUSBCFG_INDICATORPASSTHROUGH);
break;
case DWC2_PHY_TYPE_PARAM_UTMI:
/* UTMI+ interface */
dev_dbg(hsotg->dev, "HS UTMI+ PHY selected\n");
usbcfg &= ~(GUSBCFG_ULPI_UTMI_SEL | GUSBCFG_PHYIF16);
if (hsotg->params.phy_utmi_width == 16)
usbcfg |= GUSBCFG_PHYIF16;
/* Set turnaround time */
if (dwc2_is_device_mode(hsotg)) {
usbcfg &= ~GUSBCFG_USBTRDTIM_MASK;
if (hsotg->params.phy_utmi_width == 16)
usbcfg |= 5 << GUSBCFG_USBTRDTIM_SHIFT;
else
usbcfg |= 9 << GUSBCFG_USBTRDTIM_SHIFT;
}
break;
default:
dev_err(hsotg->dev, "FS PHY selected at HS!\n");
break;
}
if (usbcfg != usbcfg_old) {
dwc2_writel(hsotg, usbcfg, GUSBCFG);
/* Reset after setting the PHY parameters */
retval = dwc2_core_reset(hsotg, false);
if (retval) {
dev_err(hsotg->dev,
"%s: Reset failed, aborting", __func__);
return retval;
}
}
return retval;
}
int dwc2_phy_init(struct dwc2_hsotg *hsotg, bool select_phy)
{
u32 usbcfg;
int retval = 0;
if ((hsotg->params.speed == DWC2_SPEED_PARAM_FULL ||
hsotg->params.speed == DWC2_SPEED_PARAM_LOW) &&
hsotg->params.phy_type == DWC2_PHY_TYPE_PARAM_FS) {
/* If FS/LS mode with FS/LS PHY */
retval = dwc2_fs_phy_init(hsotg, select_phy);
if (retval)
return retval;
} else {
/* High speed PHY */
retval = dwc2_hs_phy_init(hsotg, select_phy);
if (retval)
return retval;
}
if (hsotg->hw_params.hs_phy_type == GHWCFG2_HS_PHY_TYPE_ULPI &&
hsotg->hw_params.fs_phy_type == GHWCFG2_FS_PHY_TYPE_DEDICATED &&
hsotg->params.ulpi_fs_ls) {
dev_dbg(hsotg->dev, "Setting ULPI FSLS\n");
usbcfg = dwc2_readl(hsotg, GUSBCFG);
usbcfg |= GUSBCFG_ULPI_FS_LS;
usbcfg |= GUSBCFG_ULPI_CLK_SUSP_M;
dwc2_writel(hsotg, usbcfg, GUSBCFG);
} else {
usbcfg = dwc2_readl(hsotg, GUSBCFG);
usbcfg &= ~GUSBCFG_ULPI_FS_LS;
usbcfg &= ~GUSBCFG_ULPI_CLK_SUSP_M;
dwc2_writel(hsotg, usbcfg, GUSBCFG);
}
return retval;
}
MODULE_DESCRIPTION("DESIGNWARE HS OTG Core");
MODULE_AUTHOR("Synopsys, Inc.");
MODULE_LICENSE("Dual BSD/GPL");

14
drivers/usb/dwc2/core.h
View File

@ -859,6 +859,8 @@ struct dwc2_hregs_backup {
* @gadget_enabled: Peripheral mode sub-driver initialization indicator.
* @ll_hw_enabled: Status of low-level hardware resources.
* @hibernated: True if core is hibernated
* @reset_phy_on_wake: Quirk saying that we should assert PHY reset on a
* remote wakeup.
* @frame_number: Frame number read from the core. For both device
* and host modes. The value ranges are from 0
* to HFNUM_MAX_FRNUM.
@ -869,7 +871,6 @@ struct dwc2_hregs_backup {
* removed once all SoCs support usb transceiver.
* @supplies: Definition of USB power supplies
* @vbus_supply: Regulator supplying vbus.
* @phyif: PHY interface width
* @lock: Spinlock that protects all the driver data structures
* @priv: Stores a pointer to the struct usb_hcd
* @queuing_high_bandwidth: True if multiple packets of a high-bandwidth
@ -972,6 +973,7 @@ struct dwc2_hregs_backup {
* @status_buf_dma: DMA address for status_buf
* @start_work: Delayed work for handling host A-cable connection
* @reset_work: Delayed work for handling a port reset
* @phy_reset_work: Work structure for doing a PHY reset
* @otg_port: OTG port number
* @frame_list: Frame list
* @frame_list_dma: Frame list DMA address
@ -991,6 +993,7 @@ struct dwc2_hregs_backup {
* @ctrl_buff: Buffer for EP0 control requests.
* @ctrl_req: Request for EP0 control packets.
* @ep0_state: EP0 control transfers state
* @delayed_status: true when gadget driver asks for delayed status
* @test_mode: USB test mode requested by the host
* @remote_wakeup_allowed: True if device is allowed to wake-up host by
* remote-wakeup signalling
@ -1045,6 +1048,7 @@ struct dwc2_hsotg {
unsigned int gadget_enabled:1;
unsigned int ll_hw_enabled:1;
unsigned int hibernated:1;
unsigned int reset_phy_on_wake:1;
u16 frame_number;
struct phy *phy;
@ -1052,7 +1056,6 @@ struct dwc2_hsotg {
struct dwc2_hsotg_plat *plat;
struct regulator_bulk_data supplies[DWC2_NUM_SUPPLIES];
struct regulator *vbus_supply;
u32 phyif;
spinlock_t lock;
void *priv;
@ -1147,6 +1150,7 @@ struct dwc2_hsotg {
struct delayed_work start_work;
struct delayed_work reset_work;
struct work_struct phy_reset_work;
u8 otg_port;
u32 *frame_list;
dma_addr_t frame_list_dma;
@ -1172,6 +1176,7 @@ struct dwc2_hsotg {
void *ep0_buff;
void *ctrl_buff;
enum dwc2_ep0_state ep0_state;
unsigned delayed_status : 1;
u8 test_mode;
dma_addr_t setup_desc_dma[2];
@ -1283,6 +1288,8 @@ int dwc2_exit_partial_power_down(struct dwc2_hsotg *hsotg, bool restore);
int dwc2_enter_hibernation(struct dwc2_hsotg *hsotg, int is_host);
int dwc2_exit_hibernation(struct dwc2_hsotg *hsotg, int rem_wakeup,
int reset, int is_host);
void dwc2_init_fs_ls_pclk_sel(struct dwc2_hsotg *hsotg);
int dwc2_phy_init(struct dwc2_hsotg *hsotg, bool select_phy);
void dwc2_force_mode(struct dwc2_hsotg *hsotg, bool host);
void dwc2_force_dr_mode(struct dwc2_hsotg *hsotg);
@ -1431,6 +1438,8 @@ int dwc2_restore_host_registers(struct dwc2_hsotg *hsotg);
int dwc2_host_enter_hibernation(struct dwc2_hsotg *hsotg);
int dwc2_host_exit_hibernation(struct dwc2_hsotg *hsotg,
int rem_wakeup, int reset);
static inline void dwc2_host_schedule_phy_reset(struct dwc2_hsotg *hsotg)
{ schedule_work(&hsotg->phy_reset_work); }
#else
static inline int dwc2_hcd_get_frame_number(struct dwc2_hsotg *hsotg)
{ return 0; }
@ -1454,6 +1463,7 @@ static inline int dwc2_host_enter_hibernation(struct dwc2_hsotg *hsotg)
static inline int dwc2_host_exit_hibernation(struct dwc2_hsotg *hsotg,
int rem_wakeup, int reset)
{ return 0; }
static inline void dwc2_host_schedule_phy_reset(struct dwc2_hsotg *hsotg) {}
#endif

12
drivers/usb/dwc2/core_intr.c
View File

@ -435,6 +435,18 @@ static void dwc2_handle_wakeup_detected_intr(struct dwc2_hsotg *hsotg)
/* Restart the Phy Clock */
pcgcctl &= ~PCGCTL_STOPPCLK;
dwc2_writel(hsotg, pcgcctl, PCGCTL);
/*
* If we've got this quirk then the PHY is stuck upon
* wakeup. Assert reset. This will propagate out and
* eventually we'll re-enumerate the device. Not great
* but the best we can do. We can't call phy_reset()
* at interrupt time but there's no hurry, so we'll
* schedule it for later.
*/
if (hsotg->reset_phy_on_wake)
dwc2_host_schedule_phy_reset(hsotg);
mod_timer(&hsotg->wkp_timer,
jiffies + msecs_to_jiffies(71));
} else {

99
drivers/usb/dwc2/gadget.c
View File

@ -27,6 +27,8 @@
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
#include <linux/usb/phy.h>
#include <linux/usb/composite.h>
#include "core.h"
#include "hw.h"
@ -714,13 +716,11 @@ static unsigned int dwc2_gadget_get_chain_limit(struct dwc2_hsotg_ep *hs_ep)
unsigned int maxsize;
if (is_isoc)
maxsize = hs_ep->dir_in ? DEV_DMA_ISOC_TX_NBYTES_LIMIT :
DEV_DMA_ISOC_RX_NBYTES_LIMIT;
maxsize = (hs_ep->dir_in ? DEV_DMA_ISOC_TX_NBYTES_LIMIT :
DEV_DMA_ISOC_RX_NBYTES_LIMIT) *
MAX_DMA_DESC_NUM_HS_ISOC;
else
maxsize = DEV_DMA_NBYTES_LIMIT;
/* Above size of one descriptor was chosen, multiple it */
maxsize *= MAX_DMA_DESC_NUM_GENERIC;
maxsize = DEV_DMA_NBYTES_LIMIT * MAX_DMA_DESC_NUM_GENERIC;
return maxsize;
}
@ -932,7 +932,7 @@ static int dwc2_gadget_fill_isoc_desc(struct dwc2_hsotg_ep *hs_ep,
/* Update index of last configured entry in the chain */
hs_ep->next_desc++;
if (hs_ep->next_desc >= MAX_DMA_DESC_NUM_GENERIC)
if (hs_ep->next_desc >= MAX_DMA_DESC_NUM_HS_ISOC)
hs_ep->next_desc = 0;
return 0;
@ -964,7 +964,7 @@ static void dwc2_gadget_start_isoc_ddma(struct dwc2_hsotg_ep *hs_ep)
}
/* Initialize descriptor chain by Host Busy status */
for (i = 0; i < MAX_DMA_DESC_NUM_GENERIC; i++) {
for (i = 0; i < MAX_DMA_DESC_NUM_HS_ISOC; i++) {
desc = &hs_ep->desc_list[i];
desc->status = 0;
desc->status |= (DEV_DMA_BUFF_STS_HBUSY
@ -1446,6 +1446,11 @@ static int dwc2_hsotg_ep_queue(struct usb_ep *ep, struct usb_request *req,
return 0;
}
/* Change EP direction if status phase request is after data out */
if (!hs_ep->index && !req->length && !hs_ep->dir_in &&
hs->ep0_state == DWC2_EP0_DATA_OUT)
hs_ep->dir_in = 1;
if (first) {
if (!hs_ep->isochronous) {
dwc2_hsotg_start_req(hs, hs_ep, hs_req, false);
@ -1938,6 +1943,10 @@ static void dwc2_hsotg_process_control(struct dwc2_hsotg *hsotg,
dev_dbg(hsotg->dev, "driver->setup() ret %d\n", ret);
}
hsotg->delayed_status = false;
if (ret == USB_GADGET_DELAYED_STATUS)
hsotg->delayed_status = true;
/*
* the request is either unhandlable, or is not formatted correctly
* so respond with a STALL for the status stage to indicate failure.
@ -2157,12 +2166,17 @@ static void dwc2_gadget_complete_isoc_request_ddma(struct dwc2_hsotg_ep *hs_ep)
*/
if (!hs_ep->dir_in && ureq->length & 0x3)
ureq->actual += 4 - (ureq->length & 0x3);
/* Set actual frame number for completed transfers */
ureq->frame_number =
(desc_sts & DEV_DMA_ISOC_FRNUM_MASK) >>
DEV_DMA_ISOC_FRNUM_SHIFT;
}
dwc2_hsotg_complete_request(hsotg, hs_ep, hs_req, 0);
hs_ep->compl_desc++;
if (hs_ep->compl_desc > (MAX_DMA_DESC_NUM_GENERIC - 1))
if (hs_ep->compl_desc > (MAX_DMA_DESC_NUM_HS_ISOC - 1))
hs_ep->compl_desc = 0;
desc_sts = hs_ep->desc_list[hs_ep->compl_desc].status;
}
@ -2311,6 +2325,7 @@ static unsigned int dwc2_gadget_get_xfersize_ddma(struct dwc2_hsotg_ep *hs_ep)
if (status & DEV_DMA_STS_MASK)
dev_err(hsotg->dev, "descriptor %d closed with %x\n",
i, status & DEV_DMA_STS_MASK);
desc++;
}
return bytes_rem;
@ -2387,8 +2402,8 @@ static void dwc2_hsotg_handle_outdone(struct dwc2_hsotg *hsotg, int epnum)
if (!using_desc_dma(hsotg) && epnum == 0 &&
hsotg->ep0_state == DWC2_EP0_DATA_OUT) {
/* Move to STATUS IN */
dwc2_hsotg_ep0_zlp(hsotg, true);
return;
if (!hsotg->delayed_status)
dwc2_hsotg_ep0_zlp(hsotg, true);
}
/*
@ -3053,8 +3068,20 @@ static void dwc2_hsotg_epint(struct dwc2_hsotg *hsotg, unsigned int idx,
/* Safety check EP0 state when STSPHSERCVD asserted */
if (hsotg->ep0_state == DWC2_EP0_DATA_OUT) {
/* Move to STATUS IN for DDMA */
if (using_desc_dma(hsotg))
dwc2_hsotg_ep0_zlp(hsotg, true);
if (using_desc_dma(hsotg)) {
if (!hsotg->delayed_status)
dwc2_hsotg_ep0_zlp(hsotg, true);
else
/* In case of 3 stage Control Write with delayed
* status, when Status IN transfer started
* before STSPHSERCVD asserted, NAKSTS bit not
* cleared by CNAK in dwc2_hsotg_start_req()
* function. Clear now NAKSTS to allow complete
* transfer.
*/
dwc2_set_bit(hsotg, DIEPCTL(0),
DXEPCTL_CNAK);
}
}
}
@ -3314,21 +3341,14 @@ void dwc2_hsotg_core_init_disconnected(struct dwc2_hsotg *hsotg,
/* keep other bits untouched (so e.g. forced modes are not lost) */
usbcfg = dwc2_readl(hsotg, GUSBCFG);
usbcfg &= ~(GUSBCFG_TOUTCAL_MASK | GUSBCFG_PHYIF16 | GUSBCFG_SRPCAP |
GUSBCFG_HNPCAP | GUSBCFG_USBTRDTIM_MASK);
usbcfg &= ~GUSBCFG_TOUTCAL_MASK;
usbcfg |= GUSBCFG_TOUTCAL(7);
if (hsotg->params.phy_type == DWC2_PHY_TYPE_PARAM_FS &&
(hsotg->params.speed == DWC2_SPEED_PARAM_FULL ||
hsotg->params.speed == DWC2_SPEED_PARAM_LOW)) {
/* FS/LS Dedicated Transceiver Interface */
usbcfg |= GUSBCFG_PHYSEL;
} else {
/* set the PLL on, remove the HNP/SRP and set the PHY */
val = (hsotg->phyif == GUSBCFG_PHYIF8) ? 9 : 5;
usbcfg |= hsotg->phyif | GUSBCFG_TOUTCAL(7) |
(val << GUSBCFG_USBTRDTIM_SHIFT);
}
dwc2_writel(hsotg, usbcfg, GUSBCFG);
/* remove the HNP/SRP and set the PHY */
usbcfg &= ~(GUSBCFG_SRPCAP | GUSBCFG_HNPCAP);
dwc2_writel(hsotg, usbcfg, GUSBCFG);
dwc2_phy_init(hsotg, true);
dwc2_hsotg_init_fifo(hsotg);
@ -3899,6 +3919,7 @@ static int dwc2_hsotg_ep_enable(struct usb_ep *ep,
unsigned int i, val, size;
int ret = 0;
unsigned char ep_type;
int desc_num;
dev_dbg(hsotg->dev,
"%s: ep %s: a 0x%02x, attr 0x%02x, mps 0x%04x, intr %d\n",
@ -3945,11 +3966,15 @@ static int dwc2_hsotg_ep_enable(struct usb_ep *ep,
dev_dbg(hsotg->dev, "%s: read DxEPCTL=0x%08x from 0x%08x\n",
__func__, epctrl, epctrl_reg);
if (using_desc_dma(hsotg) && ep_type == USB_ENDPOINT_XFER_ISOC)
desc_num = MAX_DMA_DESC_NUM_HS_ISOC;
else
desc_num = MAX_DMA_DESC_NUM_GENERIC;
/* Allocate DMA descriptor chain for non-ctrl endpoints */
if (using_desc_dma(hsotg) && !hs_ep->desc_list) {
hs_ep->desc_list = dmam_alloc_coherent(hsotg->dev,
MAX_DMA_DESC_NUM_GENERIC *
sizeof(struct dwc2_dma_desc),
desc_num * sizeof(struct dwc2_dma_desc),
&hs_ep->desc_list_dma, GFP_ATOMIC);
if (!hs_ep->desc_list) {
ret = -ENOMEM;
@ -4092,7 +4117,7 @@ error1:
error2:
if (ret && using_desc_dma(hsotg) && hs_ep->desc_list) {
dmam_free_coherent(hsotg->dev, MAX_DMA_DESC_NUM_GENERIC *
dmam_free_coherent(hsotg->dev, desc_num *
sizeof(struct dwc2_dma_desc),
hs_ep->desc_list, hs_ep->desc_list_dma);
hs_ep->desc_list = NULL;
@ -4328,8 +4353,6 @@ static const struct usb_ep_ops dwc2_hsotg_ep_ops = {
*/
static void dwc2_hsotg_init(struct dwc2_hsotg *hsotg)
{
u32 trdtim;
u32 usbcfg;
/* unmask subset of endpoint interrupts */
dwc2_writel(hsotg, DIEPMSK_TIMEOUTMSK | DIEPMSK_AHBERRMSK |
@ -4353,17 +4376,6 @@ static void dwc2_hsotg_init(struct dwc2_hsotg *hsotg)
dwc2_hsotg_init_fifo(hsotg);
/* keep other bits untouched (so e.g. forced modes are not lost) */
usbcfg = dwc2_readl(hsotg, GUSBCFG);
usbcfg &= ~(GUSBCFG_TOUTCAL_MASK | GUSBCFG_PHYIF16 | GUSBCFG_SRPCAP |
GUSBCFG_HNPCAP | GUSBCFG_USBTRDTIM_MASK);
/* set the PLL on, remove the HNP/SRP and set the PHY */
trdtim = (hsotg->phyif == GUSBCFG_PHYIF8) ? 9 : 5;
usbcfg |= hsotg->phyif | GUSBCFG_TOUTCAL(7) |
(trdtim << GUSBCFG_USBTRDTIM_SHIFT);
dwc2_writel(hsotg, usbcfg, GUSBCFG);
if (using_dma(hsotg))
dwc2_set_bit(hsotg, GAHBCFG, GAHBCFG_DMA_EN);
}
@ -5073,6 +5085,7 @@ void dwc2_gadget_init_lpm(struct dwc2_hsotg *hsotg)
val |= hsotg->params.lpm_clock_gating ? GLPMCFG_ENBLSLPM : 0;
val |= hsotg->params.hird_threshold << GLPMCFG_HIRD_THRES_SHIFT;
val |= hsotg->params.besl ? GLPMCFG_ENBESL : 0;
val |= GLPMCFG_LPM_REJECT_CTRL_CONTROL;
val |= GLPMCFG_LPM_ACCEPT_CTRL_ISOC;
dwc2_writel(hsotg, val, GLPMCFG);
dev_dbg(hsotg->dev, "GLPMCFG=0x%08x\n", dwc2_readl(hsotg, GLPMCFG));

324
drivers/usb/dwc2/hcd.c
View File

@ -97,196 +97,6 @@ static void dwc2_enable_common_interrupts(struct dwc2_hsotg *hsotg)
dwc2_writel(hsotg, intmsk, GINTMSK);
}
/*
* Initializes the FSLSPClkSel field of the HCFG register depending on the
* PHY type
*/
static void dwc2_init_fs_ls_pclk_sel(struct dwc2_hsotg *hsotg)
{
u32 hcfg, val;
if ((hsotg->hw_params.hs_phy_type == GHWCFG2_HS_PHY_TYPE_ULPI &&
hsotg->hw_params.fs_phy_type == GHWCFG2_FS_PHY_TYPE_DEDICATED &&
hsotg->params.ulpi_fs_ls) ||
hsotg->params.phy_type == DWC2_PHY_TYPE_PARAM_FS) {
/* Full speed PHY */
val = HCFG_FSLSPCLKSEL_48_MHZ;
} else {
/* High speed PHY running at full speed or high speed */
val = HCFG_FSLSPCLKSEL_30_60_MHZ;
}
dev_dbg(hsotg->dev, "Initializing HCFG.FSLSPClkSel to %08x\n", val);
hcfg = dwc2_readl(hsotg, HCFG);
hcfg &= ~HCFG_FSLSPCLKSEL_MASK;
hcfg |= val << HCFG_FSLSPCLKSEL_SHIFT;
dwc2_writel(hsotg, hcfg, HCFG);
}
static int dwc2_fs_phy_init(struct dwc2_hsotg *hsotg, bool select_phy)
{
u32 usbcfg, ggpio, i2cctl;
int retval = 0;
/*
* core_init() is now called on every switch so only call the
* following for the first time through
*/
if (select_phy) {
dev_dbg(hsotg->dev, "FS PHY selected\n");
usbcfg = dwc2_readl(hsotg, GUSBCFG);
if (!(usbcfg & GUSBCFG_PHYSEL)) {
usbcfg |= GUSBCFG_PHYSEL;
dwc2_writel(hsotg, usbcfg, GUSBCFG);
/* Reset after a PHY select */
retval = dwc2_core_reset(hsotg, false);
if (retval) {
dev_err(hsotg->dev,
"%s: Reset failed, aborting", __func__);
return retval;
}
}
if (hsotg->params.activate_stm_fs_transceiver) {
ggpio = dwc2_readl(hsotg, GGPIO);
if (!(ggpio & GGPIO_STM32_OTG_GCCFG_PWRDWN)) {
dev_dbg(hsotg->dev, "Activating transceiver\n");
/*
* STM32F4x9 uses the GGPIO register as general
* core configuration register.
*/
ggpio |= GGPIO_STM32_OTG_GCCFG_PWRDWN;
dwc2_writel(hsotg, ggpio, GGPIO);
}
}
}
/*
* Program DCFG.DevSpd or HCFG.FSLSPclkSel to 48Mhz in FS. Also
* do this on HNP Dev/Host mode switches (done in dev_init and
* host_init).
*/
if (dwc2_is_host_mode(hsotg))
dwc2_init_fs_ls_pclk_sel(hsotg);
if (hsotg->params.i2c_enable) {
dev_dbg(hsotg->dev, "FS PHY enabling I2C\n");
/* Program GUSBCFG.OtgUtmiFsSel to I2C */
usbcfg = dwc2_readl(hsotg, GUSBCFG);
usbcfg |= GUSBCFG_OTG_UTMI_FS_SEL;
dwc2_writel(hsotg, usbcfg, GUSBCFG);
/* Program GI2CCTL.I2CEn */
i2cctl = dwc2_readl(hsotg, GI2CCTL);
i2cctl &= ~GI2CCTL_I2CDEVADDR_MASK;
i2cctl |= 1 << GI2CCTL_I2CDEVADDR_SHIFT;
i2cctl &= ~GI2CCTL_I2CEN;
dwc2_writel(hsotg, i2cctl, GI2CCTL);
i2cctl |= GI2CCTL_I2CEN;
dwc2_writel(hsotg, i2cctl, GI2CCTL);
}
return retval;
}
static int dwc2_hs_phy_init(struct dwc2_hsotg *hsotg, bool select_phy)
{
u32 usbcfg, usbcfg_old;
int retval = 0;
if (!select_phy)
return 0;
usbcfg = dwc2_readl(hsotg, GUSBCFG);
usbcfg_old = usbcfg;
/*
* HS PHY parameters. These parameters are preserved during soft reset
* so only program the first time. Do a soft reset immediately after
* setting phyif.
*/
switch (hsotg->params.phy_type) {
case DWC2_PHY_TYPE_PARAM_ULPI:
/* ULPI interface */
dev_dbg(hsotg->dev, "HS ULPI PHY selected\n");
usbcfg |= GUSBCFG_ULPI_UTMI_SEL;
usbcfg &= ~(GUSBCFG_PHYIF16 | GUSBCFG_DDRSEL);
if (hsotg->params.phy_ulpi_ddr)
usbcfg |= GUSBCFG_DDRSEL;
/* Set external VBUS indicator as needed. */
if (hsotg->params.oc_disable)
usbcfg |= (GUSBCFG_ULPI_INT_VBUS_IND |
GUSBCFG_INDICATORPASSTHROUGH);
break;
case DWC2_PHY_TYPE_PARAM_UTMI:
/* UTMI+ interface */
dev_dbg(hsotg->dev, "HS UTMI+ PHY selected\n");
usbcfg &= ~(GUSBCFG_ULPI_UTMI_SEL | GUSBCFG_PHYIF16);
if (hsotg->params.phy_utmi_width == 16)
usbcfg |= GUSBCFG_PHYIF16;
break;
default:
dev_err(hsotg->dev, "FS PHY selected at HS!\n");
break;
}
if (usbcfg != usbcfg_old) {
dwc2_writel(hsotg, usbcfg, GUSBCFG);
/* Reset after setting the PHY parameters */
retval = dwc2_core_reset(hsotg, false);
if (retval) {
dev_err(hsotg->dev,
"%s: Reset failed, aborting", __func__);
return retval;
}
}
return retval;
}
static int dwc2_phy_init(struct dwc2_hsotg *hsotg, bool select_phy)
{
u32 usbcfg;
int retval = 0;
if ((hsotg->params.speed == DWC2_SPEED_PARAM_FULL ||
hsotg->params.speed == DWC2_SPEED_PARAM_LOW) &&
hsotg->params.phy_type == DWC2_PHY_TYPE_PARAM_FS) {
/* If FS/LS mode with FS/LS PHY */
retval = dwc2_fs_phy_init(hsotg, select_phy);
if (retval)
return retval;
} else {
/* High speed PHY */
retval = dwc2_hs_phy_init(hsotg, select_phy);
if (retval)
return retval;
}
if (hsotg->hw_params.hs_phy_type == GHWCFG2_HS_PHY_TYPE_ULPI &&
hsotg->hw_params.fs_phy_type == GHWCFG2_FS_PHY_TYPE_DEDICATED &&
hsotg->params.ulpi_fs_ls) {
dev_dbg(hsotg->dev, "Setting ULPI FSLS\n");
usbcfg = dwc2_readl(hsotg, GUSBCFG);
usbcfg |= GUSBCFG_ULPI_FS_LS;
usbcfg |= GUSBCFG_ULPI_CLK_SUSP_M;
dwc2_writel(hsotg, usbcfg, GUSBCFG);
} else {
usbcfg = dwc2_readl(hsotg, GUSBCFG);
usbcfg &= ~GUSBCFG_ULPI_FS_LS;
usbcfg &= ~GUSBCFG_ULPI_CLK_SUSP_M;
dwc2_writel(hsotg, usbcfg, GUSBCFG);
}
return retval;
}
static int dwc2_gahbcfg_init(struct dwc2_hsotg *hsotg)
{
u32 ahbcfg = dwc2_readl(hsotg, GAHBCFG);
@ -2437,25 +2247,31 @@ static void dwc2_core_host_init(struct dwc2_hsotg *hsotg)
num_channels = hsotg->params.host_channels;
for (i = 0; i < num_channels; i++) {
hcchar = dwc2_readl(hsotg, HCCHAR(i));
hcchar &= ~HCCHAR_CHENA;
hcchar |= HCCHAR_CHDIS;
hcchar &= ~HCCHAR_EPDIR;
dwc2_writel(hsotg, hcchar, HCCHAR(i));
if (hcchar & HCCHAR_CHENA) {
hcchar &= ~HCCHAR_CHENA;
hcchar |= HCCHAR_CHDIS;
hcchar &= ~HCCHAR_EPDIR;
dwc2_writel(hsotg, hcchar, HCCHAR(i));
}
}
/* Halt all channels to put them into a known state */
for (i = 0; i < num_channels; i++) {
hcchar = dwc2_readl(hsotg, HCCHAR(i));
hcchar |= HCCHAR_CHENA | HCCHAR_CHDIS;
hcchar &= ~HCCHAR_EPDIR;
dwc2_writel(hsotg, hcchar, HCCHAR(i));
dev_dbg(hsotg->dev, "%s: Halt channel %d\n",
__func__, i);
if (hcchar & HCCHAR_CHENA) {
hcchar |= HCCHAR_CHENA | HCCHAR_CHDIS;
hcchar &= ~HCCHAR_EPDIR;
dwc2_writel(hsotg, hcchar, HCCHAR(i));
dev_dbg(hsotg->dev, "%s: Halt channel %d\n",
__func__, i);
if (dwc2_hsotg_wait_bit_clear(hsotg, HCCHAR(i),
HCCHAR_CHENA, 1000)) {
dev_warn(hsotg->dev, "Unable to clear enable on channel %d\n",
i);
if (dwc2_hsotg_wait_bit_clear(hsotg, HCCHAR(i),
HCCHAR_CHENA,
1000)) {
dev_warn(hsotg->dev,
"Unable to clear enable on channel %d\n",
i);
}
}
}
}
@ -4376,6 +4192,17 @@ static void dwc2_hcd_reset_func(struct work_struct *work)
spin_unlock_irqrestore(&hsotg->lock, flags);
}
static void dwc2_hcd_phy_reset_func(struct work_struct *work)
{
struct dwc2_hsotg *hsotg = container_of(work, struct dwc2_hsotg,
phy_reset_work);
int ret;
ret = phy_reset(hsotg->phy);
if (ret)
dev_warn(hsotg->dev, "PHY reset failed\n");
}
/*
* =========================================================================
* Linux HC Driver Functions
@ -4471,6 +4298,7 @@ static int _dwc2_hcd_suspend(struct usb_hcd *hcd)
unsigned long flags;
int ret = 0;
u32 hprt0;
u32 pcgctl;
spin_lock_irqsave(&hsotg->lock, flags);
@ -4486,7 +4314,7 @@ static int _dwc2_hcd_suspend(struct usb_hcd *hcd)
if (hsotg->op_state == OTG_STATE_B_PERIPHERAL)
goto unlock;
if (hsotg->params.power_down != DWC2_POWER_DOWN_PARAM_PARTIAL)
if (hsotg->params.power_down > DWC2_POWER_DOWN_PARAM_PARTIAL)
goto skip_power_saving;
/*
@ -4495,21 +4323,35 @@ static int _dwc2_hcd_suspend(struct usb_hcd *hcd)
*/
if (!hsotg->bus_suspended) {
hprt0 = dwc2_read_hprt0(hsotg);
hprt0 |= HPRT0_SUSP;
hprt0 &= ~HPRT0_PWR;
dwc2_writel(hsotg, hprt0, HPRT0);
spin_unlock_irqrestore(&hsotg->lock, flags);
dwc2_vbus_supply_exit(hsotg);
spin_lock_irqsave(&hsotg->lock, flags);
if (hprt0 & HPRT0_CONNSTS) {
hprt0 |= HPRT0_SUSP;
if (hsotg->params.power_down == DWC2_POWER_DOWN_PARAM_PARTIAL)
hprt0 &= ~HPRT0_PWR;
dwc2_writel(hsotg, hprt0, HPRT0);
}
if (hsotg->params.power_down == DWC2_POWER_DOWN_PARAM_PARTIAL) {
spin_unlock_irqrestore(&hsotg->lock, flags);
dwc2_vbus_supply_exit(hsotg);
spin_lock_irqsave(&hsotg->lock, flags);
} else {
pcgctl = readl(hsotg->regs + PCGCTL);
pcgctl |= PCGCTL_STOPPCLK;
writel(pcgctl, hsotg->regs + PCGCTL);
}
}
/* Enter partial_power_down */
ret = dwc2_enter_partial_power_down(hsotg);
if (ret) {
if (ret != -ENOTSUPP)
dev_err(hsotg->dev,
"enter partial_power_down failed\n");
goto skip_power_saving;
if (hsotg->params.power_down == DWC2_POWER_DOWN_PARAM_PARTIAL) {
/* Enter partial_power_down */
ret = dwc2_enter_partial_power_down(hsotg);
if (ret) {
if (ret != -ENOTSUPP)
dev_err(hsotg->dev,
"enter partial_power_down failed\n");
goto skip_power_saving;
}
/* After entering partial_power_down, hardware is no more accessible */
clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
}
/* Ask phy to be suspended */
@ -4519,9 +4361,6 @@ static int _dwc2_hcd_suspend(struct usb_hcd *hcd)
spin_lock_irqsave(&hsotg->lock, flags);
}
/* After entering partial_power_down, hardware is no more accessible */
clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
skip_power_saving:
hsotg->lx_state = DWC2_L2;
unlock:
@ -4534,6 +4373,7 @@ static int _dwc2_hcd_resume(struct usb_hcd *hcd)
{
struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
unsigned long flags;
u32 pcgctl;
int ret = 0;
spin_lock_irqsave(&hsotg->lock, flags);
@ -4544,17 +4384,11 @@ static int _dwc2_hcd_resume(struct usb_hcd *hcd)
if (hsotg->lx_state != DWC2_L2)
goto unlock;
if (hsotg->params.power_down != DWC2_POWER_DOWN_PARAM_PARTIAL) {
if (hsotg->params.power_down > DWC2_POWER_DOWN_PARAM_PARTIAL) {
hsotg->lx_state = DWC2_L0;
goto unlock;
}
/*
* Set HW accessible bit before powering on the controller
* since an interrupt may rise.
*/
set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
/*
* Enable power if not already done.
* This must not be spinlocked since duration
@ -4566,10 +4400,23 @@ static int _dwc2_hcd_resume(struct usb_hcd *hcd)
spin_lock_irqsave(&hsotg->lock, flags);
}
/* Exit partial_power_down */
ret = dwc2_exit_partial_power_down(hsotg, true);
if (ret && (ret != -ENOTSUPP))
dev_err(hsotg->dev, "exit partial_power_down failed\n");
if (hsotg->params.power_down == DWC2_POWER_DOWN_PARAM_PARTIAL) {
/*
* Set HW accessible bit before powering on the controller
* since an interrupt may rise.
*/
set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
/* Exit partial_power_down */
ret = dwc2_exit_partial_power_down(hsotg, true);
if (ret && (ret != -ENOTSUPP))
dev_err(hsotg->dev, "exit partial_power_down failed\n");
} else {
pcgctl = readl(hsotg->regs + PCGCTL);
pcgctl &= ~PCGCTL_STOPPCLK;
writel(pcgctl, hsotg->regs + PCGCTL);
}
hsotg->lx_state = DWC2_L0;
@ -4581,10 +4428,12 @@ static int _dwc2_hcd_resume(struct usb_hcd *hcd)
spin_unlock_irqrestore(&hsotg->lock, flags);
dwc2_port_resume(hsotg);
} else {
dwc2_vbus_supply_init(hsotg);
if (hsotg->params.power_down == DWC2_POWER_DOWN_PARAM_PARTIAL) {
dwc2_vbus_supply_init(hsotg);
/* Wait for controller to correctly update D+/D- level */
usleep_range(3000, 5000);
/* Wait for controller to correctly update D+/D- level */
usleep_range(3000, 5000);
}
/*
* Clear Port Enable and Port Status changes.
@ -5130,6 +4979,8 @@ static void dwc2_hcd_free(struct dwc2_hsotg *hsotg)
destroy_workqueue(hsotg->wq_otg);
}
cancel_work_sync(&hsotg->phy_reset_work);
del_timer(&hsotg->wkp_timer);
}
@ -5271,11 +5122,10 @@ int dwc2_hcd_init(struct dwc2_hsotg *hsotg)
hsotg->hc_ptr_array[i] = channel;
}
/* Initialize hsotg start work */
/* Initialize work */
INIT_DELAYED_WORK(&hsotg->start_work, dwc2_hcd_start_func);
/* Initialize port reset work */
INIT_DELAYED_WORK(&hsotg->reset_work, dwc2_hcd_reset_func);
INIT_WORK(&hsotg->phy_reset_work, dwc2_hcd_phy_reset_func);
/*
* Allocate space for storing data on status transactions. Normally no

8
drivers/usb/dwc2/hw.h
View File

@ -310,12 +310,12 @@
#define GHWCFG4_NUM_DEV_MODE_CTRL_EP_SHIFT 16
#define GHWCFG4_UTMI_PHY_DATA_WIDTH_MASK (0x3 << 14)
#define GHWCFG4_UTMI_PHY_DATA_WIDTH_SHIFT 14
#define GHWCFG4_ACG_SUPPORTED BIT(12)
#define GHWCFG4_IPG_ISOC_SUPPORTED BIT(11)
#define GHWCFG4_SERVICE_INTERVAL_SUPPORTED BIT(10)
#define GHWCFG4_UTMI_PHY_DATA_WIDTH_8 0
#define GHWCFG4_UTMI_PHY_DATA_WIDTH_16 1
#define GHWCFG4_UTMI_PHY_DATA_WIDTH_8_OR_16 2
#define GHWCFG4_ACG_SUPPORTED BIT(12)
#define GHWCFG4_IPG_ISOC_SUPPORTED BIT(11)
#define GHWCFG4_SERVICE_INTERVAL_SUPPORTED BIT(10)
#define GHWCFG4_XHIBER BIT(7)
#define GHWCFG4_HIBER BIT(6)
#define GHWCFG4_MIN_AHB_FREQ BIT(5)
@ -333,7 +333,7 @@
#define GLPMCFG_SNDLPM BIT(24)
#define GLPMCFG_RETRY_CNT_MASK (0x7 << 21)
#define GLPMCFG_RETRY_CNT_SHIFT 21
#define GLPMCFG_LPM_ACCEPT_CTRL_CONTROL BIT(21)
#define GLPMCFG_LPM_REJECT_CTRL_CONTROL BIT(21)
#define GLPMCFG_LPM_ACCEPT_CTRL_ISOC BIT(22)
#define GLPMCFG_LPM_CHNL_INDX_MASK (0xf << 17)
#define GLPMCFG_LPM_CHNL_INDX_SHIFT 17

35
drivers/usb/dwc2/params.c
View File

@ -121,6 +121,16 @@ static void dwc2_set_amlogic_params(struct dwc2_hsotg *hsotg)
p->power_down = DWC2_POWER_DOWN_PARAM_NONE;
}
static void dwc2_set_amlogic_g12a_params(struct dwc2_hsotg *hsotg)
{
struct dwc2_core_params *p = &hsotg->params;
p->lpm = false;
p->lpm_clock_gating = false;
p->besl = false;
p->hird_threshold_en = false;
}
static void dwc2_set_amcc_params(struct dwc2_hsotg *hsotg)
{
struct dwc2_core_params *p = &hsotg->params;
@ -167,6 +177,8 @@ const struct of_device_id dwc2_of_match_table[] = {
.data = dwc2_set_amlogic_params },
{ .compatible = "amlogic,meson-gxbb-usb",
.data = dwc2_set_amlogic_params },
{ .compatible = "amlogic,meson-g12a-usb",
.data = dwc2_set_amlogic_g12a_params },
{ .compatible = "amcc,dwc-otg", .data = dwc2_set_amcc_params },
{ .compatible = "st,stm32f4x9-fsotg",
.data = dwc2_set_stm32f4x9_fsotg_params },
@ -273,6 +285,23 @@ static void dwc2_set_param_power_down(struct dwc2_hsotg *hsotg)
hsotg->params.power_down = val;
}
static void dwc2_set_param_lpm(struct dwc2_hsotg *hsotg)
{
struct dwc2_core_params *p = &hsotg->params;
p->lpm = hsotg->hw_params.lpm_mode;
if (p->lpm) {
p->lpm_clock_gating = true;
p->besl = true;
p->hird_threshold_en = true;
p->hird_threshold = 4;
} else {
p->lpm_clock_gating = false;
p->besl = false;
p->hird_threshold_en = false;
}
}
/**
* dwc2_set_default_params() - Set all core parameters to their
* auto-detected default values.
@ -291,6 +320,7 @@ static void dwc2_set_default_params(struct dwc2_hsotg *hsotg)
dwc2_set_param_speed(hsotg);
dwc2_set_param_phy_utmi_width(hsotg);
dwc2_set_param_power_down(hsotg);
dwc2_set_param_lpm(hsotg);
p->phy_ulpi_ddr = false;
p->phy_ulpi_ext_vbus = false;
@ -303,11 +333,6 @@ static void dwc2_set_default_params(struct dwc2_hsotg *hsotg)
p->reload_ctl = (hw->snpsid >= DWC2_CORE_REV_2_92a);
p->uframe_sched = true;
p->external_id_pin_ctl = false;
p->lpm = true;
p->lpm_clock_gating = true;
p->besl = true;
p->hird_threshold_en = true;
p->hird_threshold = 4;
p->ipg_isoc_en = false;
p->service_interval = false;
p->max_packet_count = hw->max_packet_count;

14
drivers/usb/dwc2/platform.c
View File

@ -230,9 +230,6 @@ static int dwc2_lowlevel_hw_init(struct dwc2_hsotg *hsotg)
reset_control_deassert(hsotg->reset_ecc);
/* Set default UTMI width */
hsotg->phyif = GUSBCFG_PHYIF16;
/*
* Attempt to find a generic PHY, then look for an old style
* USB PHY and then fall back to pdata
@ -280,7 +277,7 @@ static int dwc2_lowlevel_hw_init(struct dwc2_hsotg *hsotg)
* width is 8-bit and set the phyif appropriately.
*/
if (phy_get_bus_width(hsotg->phy) == 8)
hsotg->phyif = GUSBCFG_PHYIF8;
hsotg->params.phy_utmi_width = 8;
}
/* Clock */
@ -481,6 +478,15 @@ static int dwc2_driver_probe(struct platform_device *dev)
hsotg->gadget_enabled = 1;
}
hsotg->reset_phy_on_wake =
of_property_read_bool(dev->dev.of_node,
"snps,reset-phy-on-wake");
if (hsotg->reset_phy_on_wake && !hsotg->phy) {
dev_warn(hsotg->dev,
"Quirk reset-phy-on-wake only supports generic PHYs\n");
hsotg->reset_phy_on_wake = false;
}
if (hsotg->dr_mode != USB_DR_MODE_PERIPHERAL) {
retval = dwc2_hcd_init(hsotg);
if (retval) {

10
drivers/usb/dwc3/Kconfig
View File

@ -96,6 +96,16 @@ config USB_DWC3_KEYSTONE
Support of USB2/3 functionality in TI Keystone2 and AM654 platforms.
Say 'Y' or 'M' here if you have one such device
config USB_DWC3_MESON_G12A
tristate "Amlogic Meson G12A Platforms"
depends on OF && COMMON_CLK
depends on ARCH_MESON || COMPILE_TEST
default USB_DWC3
select USB_ROLE_SWITCH
help
Support USB2/3 functionality in Amlogic G12A platforms.
Say 'Y' or 'M' if you have one such device.
config USB_DWC3_OF_SIMPLE
tristate "Generic OF Simple Glue Layer"
depends on OF && COMMON_CLK

1
drivers/usb/dwc3/Makefile
View File

@ -47,6 +47,7 @@ obj-$(CONFIG_USB_DWC3_EXYNOS) += dwc3-exynos.o
obj-$(CONFIG_USB_DWC3_PCI) += dwc3-pci.o
obj-$(CONFIG_USB_DWC3_HAPS) += dwc3-haps.o
obj-$(CONFIG_USB_DWC3_KEYSTONE) += dwc3-keystone.o
obj-$(CONFIG_USB_DWC3_MESON_G12A) += dwc3-meson-g12a.o
obj-$(CONFIG_USB_DWC3_OF_SIMPLE) += dwc3-of-simple.o
obj-$(CONFIG_USB_DWC3_ST) += dwc3-st.o
obj-$(CONFIG_USB_DWC3_QCOM) += dwc3-qcom.o

18
drivers/usb/dwc3/core.c
View File

@ -828,6 +828,7 @@ static void dwc3_set_incr_burst_type(struct dwc3 *dwc)
ret = device_property_read_u32_array(dev,
"snps,incr-burst-type-adjustment", vals, ntype);
if (ret) {
kfree(vals);
dev_err(dev, "Error to get property\n");
return;
}
@ -846,6 +847,8 @@ static void dwc3_set_incr_burst_type(struct dwc3 *dwc)
incrx_mode = INCRX_BURST_MODE;
}
kfree(vals);
/* Enable Undefined Length INCR Burst and Enable INCRx Burst */
cfg &= ~DWC3_GSBUSCFG0_INCRBRST_MASK;
if (incrx_mode)
@ -893,12 +896,6 @@ static int dwc3_core_init(struct dwc3 *dwc)
u32 reg;
int ret;
if (!dwc3_core_is_valid(dwc)) {
dev_err(dwc->dev, "this is not a DesignWare USB3 DRD Core\n");
ret = -ENODEV;
goto err0;
}
/*
* Write Linux Version Code to our GUID register so it's easy to figure
* out which kernel version a bug was found.
@ -1218,7 +1215,7 @@ static void dwc3_get_properties(struct dwc3 *dwc)
u8 tx_max_burst_prd;
/* default to highest possible threshold */
lpm_nyet_threshold = 0xff;
lpm_nyet_threshold = 0xf;
/* default to -3.5dB de-emphasis */
tx_de_emphasis = 1;
@ -1426,6 +1423,11 @@ static int dwc3_probe(struct platform_device *pdev)
dwc->regs = regs;
dwc->regs_size = resource_size(&dwc_res);
if (!dwc3_core_is_valid(dwc)) {
dev_err(dwc->dev, "this is not a DesignWare USB3 DRD Core\n");
return -ENODEV;
}
dwc3_get_properties(dwc);
dwc->reset = devm_reset_control_get_optional_shared(dev, NULL);
@ -1600,6 +1602,7 @@ static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg)
spin_lock_irqsave(&dwc->lock, flags);
dwc3_gadget_suspend(dwc);
spin_unlock_irqrestore(&dwc->lock, flags);
synchronize_irq(dwc->irq_gadget);
dwc3_core_exit(dwc);
break;
case DWC3_GCTL_PRTCAP_HOST:
@ -1632,6 +1635,7 @@ static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg)
spin_lock_irqsave(&dwc->lock, flags);
dwc3_gadget_suspend(dwc);
spin_unlock_irqrestore(&dwc->lock, flags);
synchronize_irq(dwc->irq_gadget);
}
dwc3_otg_exit(dwc);

3
drivers/usb/dwc3/core.h
View File

@ -406,8 +406,7 @@
#define DWC3_DCTL_TRGTULST_SS_INACT (DWC3_DCTL_TRGTULST(6))
/* These apply for core versions 1.94a and later */
#define DWC3_DCTL_LPM_ERRATA_MASK DWC3_DCTL_LPM_ERRATA(0xf)
#define DWC3_DCTL_LPM_ERRATA(n) ((n) << 20)
#define DWC3_DCTL_NYET_THRES(n) (((n) & 0xf) << 20)
#define DWC3_DCTL_KEEP_CONNECT BIT(19)
#define DWC3_DCTL_L1_HIBER_EN BIT(18)

3
drivers/usb/dwc3/debug.h
View File

@ -250,6 +250,9 @@ static inline void dwc3_decode_get_status(__u8 t, __u16 i, __u16 l, char *str,
size_t size)
{
switch (t & USB_RECIP_MASK) {
case USB_RECIP_DEVICE:
snprintf(str, size, "Get Device Status(Length = %d)", l);
break;
case USB_RECIP_INTERFACE:
snprintf(str, size, "Get Interface Status(Intf = %d, Length = %d)",
i, l);

604
drivers/usb/dwc3/dwc3-meson-g12a.c Normal file
View File

@ -0,0 +1,604 @@
// SPDX-License-Identifier: GPL-2.0
/*
* USB Glue for Amlogic G12A SoCs
*
* Copyright (c) 2019 BayLibre, SAS
* Author: Neil Armstrong <narmstrong@baylibre.com>
*/
/*
* The USB is organized with a glue around the DWC3 Controller IP as :
* - Control registers for each USB2 Ports
* - Control registers for the USB PHY layer
* - SuperSpeed PHY can be enabled only if port is used
*
* TOFIX:
* - Add dynamic OTG switching with ID change interrupt
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/pm_runtime.h>
#include <linux/regmap.h>
#include <linux/bitfield.h>
#include <linux/bitops.h>
#include <linux/reset.h>
#include <linux/phy/phy.h>
#include <linux/usb/otg.h>
#include <linux/usb/role.h>
#include <linux/regulator/consumer.h>
/* USB2 Ports Control Registers */
#define U2P_REG_SIZE 0x20
#define U2P_R0 0x0
#define U2P_R0_HOST_DEVICE BIT(0)
#define U2P_R0_POWER_OK BIT(1)
#define U2P_R0_HAST_MODE BIT(2)
#define U2P_R0_POWER_ON_RESET BIT(3)
#define U2P_R0_ID_PULLUP BIT(4)
#define U2P_R0_DRV_VBUS BIT(5)
#define U2P_R1 0x4
#define U2P_R1_PHY_READY BIT(0)
#define U2P_R1_ID_DIG BIT(1)
#define U2P_R1_OTG_SESSION_VALID BIT(2)
#define U2P_R1_VBUS_VALID BIT(3)
/* USB Glue Control Registers */
#define USB_R0 0x80
#define USB_R0_P30_LANE0_TX2RX_LOOPBACK BIT(17)
#define USB_R0_P30_LANE0_EXT_PCLK_REQ BIT(18)
#define USB_R0_P30_PCS_RX_LOS_MASK_VAL_MASK GENMASK(28, 19)
#define USB_R0_U2D_SS_SCALEDOWN_MODE_MASK GENMASK(30, 29)
#define USB_R0_U2D_ACT BIT(31)
#define USB_R1 0x84
#define USB_R1_U3H_BIGENDIAN_GS BIT(0)
#define USB_R1_U3H_PME_ENABLE BIT(1)
#define USB_R1_U3H_HUB_PORT_OVERCURRENT_MASK GENMASK(4, 2)
#define USB_R1_U3H_HUB_PORT_PERM_ATTACH_MASK GENMASK(9, 7)
#define USB_R1_U3H_HOST_U2_PORT_DISABLE_MASK GENMASK(13, 12)
#define USB_R1_U3H_HOST_U3_PORT_DISABLE BIT(16)
#define USB_R1_U3H_HOST_PORT_POWER_CONTROL_PRESENT BIT(17)
#define USB_R1_U3H_HOST_MSI_ENABLE BIT(18)
#define USB_R1_U3H_FLADJ_30MHZ_REG_MASK GENMASK(24, 19)
#define USB_R1_P30_PCS_TX_SWING_FULL_MASK GENMASK(31, 25)
#define USB_R2 0x88
#define USB_R2_P30_PCS_TX_DEEMPH_3P5DB_MASK GENMASK(25, 20)
#define USB_R2_P30_PCS_TX_DEEMPH_6DB_MASK GENMASK(31, 26)
#define USB_R3 0x8c
#define USB_R3_P30_SSC_ENABLE BIT(0)
#define USB_R3_P30_SSC_RANGE_MASK GENMASK(3, 1)
#define USB_R3_P30_SSC_REF_CLK_SEL_MASK GENMASK(12, 4)
#define USB_R3_P30_REF_SSP_EN BIT(13)
#define USB_R4 0x90
#define USB_R4_P21_PORT_RESET_0 BIT(0)
#define USB_R4_P21_SLEEP_M0 BIT(1)
#define USB_R4_MEM_PD_MASK GENMASK(3, 2)
#define USB_R4_P21_ONLY BIT(4)
#define USB_R5 0x94
#define USB_R5_ID_DIG_SYNC BIT(0)
#define USB_R5_ID_DIG_REG BIT(1)
#define USB_R5_ID_DIG_CFG_MASK GENMASK(3, 2)
#define USB_R5_ID_DIG_EN_0 BIT(4)
#define USB_R5_ID_DIG_EN_1 BIT(5)
#define USB_R5_ID_DIG_CURR BIT(6)
#define USB_R5_ID_DIG_IRQ BIT(7)
#define USB_R5_ID_DIG_TH_MASK GENMASK(15, 8)
#define USB_R5_ID_DIG_CNT_MASK GENMASK(23, 16)
enum {
USB2_HOST_PHY = 0,
USB2_OTG_PHY,
USB3_HOST_PHY,
PHY_COUNT,
};
static const char *phy_names[PHY_COUNT] = {
"usb2-phy0", "usb2-phy1", "usb3-phy0",
};
struct dwc3_meson_g12a {
struct device *dev;
struct regmap *regmap;
struct clk *clk;
struct reset_control *reset;
struct phy *phys[PHY_COUNT];
enum usb_dr_mode otg_mode;
enum phy_mode otg_phy_mode;
unsigned int usb2_ports;
unsigned int usb3_ports;
struct regulator *vbus;
struct usb_role_switch_desc switch_desc;
struct usb_role_switch *role_switch;
};
static void dwc3_meson_g12a_usb2_set_mode(struct dwc3_meson_g12a *priv,
int i, enum phy_mode mode)
{
if (mode == PHY_MODE_USB_HOST)
regmap_update_bits(priv->regmap, U2P_R0 + (U2P_REG_SIZE * i),
U2P_R0_HOST_DEVICE,
U2P_R0_HOST_DEVICE);
else
regmap_update_bits(priv->regmap, U2P_R0 + (U2P_REG_SIZE * i),
U2P_R0_HOST_DEVICE, 0);
}
static int dwc3_meson_g12a_usb2_init(struct dwc3_meson_g12a *priv)
{
int i;
if (priv->otg_mode == USB_DR_MODE_PERIPHERAL)
priv->otg_phy_mode = PHY_MODE_USB_DEVICE;
else
priv->otg_phy_mode = PHY_MODE_USB_HOST;
for (i = 0 ; i < USB3_HOST_PHY ; ++i) {
if (!priv->phys[i])
continue;
regmap_update_bits(priv->regmap, U2P_R0 + (U2P_REG_SIZE * i),
U2P_R0_POWER_ON_RESET,
U2P_R0_POWER_ON_RESET);
if (i == USB2_OTG_PHY) {
regmap_update_bits(priv->regmap,
U2P_R0 + (U2P_REG_SIZE * i),
U2P_R0_ID_PULLUP | U2P_R0_DRV_VBUS,
U2P_R0_ID_PULLUP | U2P_R0_DRV_VBUS);
dwc3_meson_g12a_usb2_set_mode(priv, i,
priv->otg_phy_mode);
} else
dwc3_meson_g12a_usb2_set_mode(priv, i,
PHY_MODE_USB_HOST);
regmap_update_bits(priv->regmap, U2P_R0 + (U2P_REG_SIZE * i),
U2P_R0_POWER_ON_RESET, 0);
}
return 0;
}
static void dwc3_meson_g12a_usb3_init(struct dwc3_meson_g12a *priv)
{
regmap_update_bits(priv->regmap, USB_R3,
USB_R3_P30_SSC_RANGE_MASK |
USB_R3_P30_REF_SSP_EN,
USB_R3_P30_SSC_ENABLE |
FIELD_PREP(USB_R3_P30_SSC_RANGE_MASK, 2) |
USB_R3_P30_REF_SSP_EN);
udelay(2);
regmap_update_bits(priv->regmap, USB_R2,
USB_R2_P30_PCS_TX_DEEMPH_3P5DB_MASK,
FIELD_PREP(USB_R2_P30_PCS_TX_DEEMPH_3P5DB_MASK, 0x15));
regmap_update_bits(priv->regmap, USB_R2,
USB_R2_P30_PCS_TX_DEEMPH_6DB_MASK,
FIELD_PREP(USB_R2_P30_PCS_TX_DEEMPH_6DB_MASK, 0x20));
udelay(2);
regmap_update_bits(priv->regmap, USB_R1,
USB_R1_U3H_HOST_PORT_POWER_CONTROL_PRESENT,
USB_R1_U3H_HOST_PORT_POWER_CONTROL_PRESENT);
regmap_update_bits(priv->regmap, USB_R1,
USB_R1_P30_PCS_TX_SWING_FULL_MASK,
FIELD_PREP(USB_R1_P30_PCS_TX_SWING_FULL_MASK, 127));
}
static void dwc3_meson_g12a_usb_otg_apply_mode(struct dwc3_meson_g12a *priv)
{
if (priv->otg_phy_mode == PHY_MODE_USB_DEVICE) {
regmap_update_bits(priv->regmap, USB_R0,
USB_R0_U2D_ACT, USB_R0_U2D_ACT);
regmap_update_bits(priv->regmap, USB_R0,
USB_R0_U2D_SS_SCALEDOWN_MODE_MASK, 0);
regmap_update_bits(priv->regmap, USB_R4,
USB_R4_P21_SLEEP_M0, USB_R4_P21_SLEEP_M0);
} else {
regmap_update_bits(priv->regmap, USB_R0,
USB_R0_U2D_ACT, 0);
regmap_update_bits(priv->regmap, USB_R4,
USB_R4_P21_SLEEP_M0, 0);
}
}
static int dwc3_meson_g12a_usb_init(struct dwc3_meson_g12a *priv)
{
int ret;
ret = dwc3_meson_g12a_usb2_init(priv);
if (ret)
return ret;
regmap_update_bits(priv->regmap, USB_R1,
USB_R1_U3H_FLADJ_30MHZ_REG_MASK,
FIELD_PREP(USB_R1_U3H_FLADJ_30MHZ_REG_MASK, 0x20));
regmap_update_bits(priv->regmap, USB_R5,
USB_R5_ID_DIG_EN_0,
USB_R5_ID_DIG_EN_0);
regmap_update_bits(priv->regmap, USB_R5,
USB_R5_ID_DIG_EN_1,
USB_R5_ID_DIG_EN_1);
regmap_update_bits(priv->regmap, USB_R5,
USB_R5_ID_DIG_TH_MASK,
FIELD_PREP(USB_R5_ID_DIG_TH_MASK, 0xff));
/* If we have an actual SuperSpeed port, initialize it */
if (priv->usb3_ports)
dwc3_meson_g12a_usb3_init(priv);
dwc3_meson_g12a_usb_otg_apply_mode(priv);
return 0;
}
static const struct regmap_config phy_meson_g12a_usb3_regmap_conf = {
.reg_bits = 8,
.val_bits = 32,
.reg_stride = 4,
.max_register = USB_R5,
};
static int dwc3_meson_g12a_get_phys(struct dwc3_meson_g12a *priv)
{
int i;
for (i = 0 ; i < PHY_COUNT ; ++i) {
priv->phys[i] = devm_phy_optional_get(priv->dev, phy_names[i]);
if (!priv->phys[i])
continue;
if (IS_ERR(priv->phys[i]))
return PTR_ERR(priv->phys[i]);
if (i == USB3_HOST_PHY)
priv->usb3_ports++;
else
priv->usb2_ports++;
}
dev_info(priv->dev, "USB2 ports: %d\n", priv->usb2_ports);
dev_info(priv->dev, "USB3 ports: %d\n", priv->usb3_ports);
return 0;
}
static enum phy_mode dwc3_meson_g12a_get_id(struct dwc3_meson_g12a *priv)
{
u32 reg;
regmap_read(priv->regmap, USB_R5, &reg);
if (reg & (USB_R5_ID_DIG_SYNC | USB_R5_ID_DIG_REG))
return PHY_MODE_USB_DEVICE;
return PHY_MODE_USB_HOST;
}
static int dwc3_meson_g12a_otg_mode_set(struct dwc3_meson_g12a *priv,
enum phy_mode mode)
{
int ret;
if (!priv->phys[USB2_OTG_PHY])
return -EINVAL;
if (mode == PHY_MODE_USB_HOST)
dev_info(priv->dev, "switching to Host Mode\n");
else
dev_info(priv->dev, "switching to Device Mode\n");
if (priv->vbus) {
if (mode == PHY_MODE_USB_DEVICE)
ret = regulator_disable(priv->vbus);
else
ret = regulator_enable(priv->vbus);
if (ret)
return ret;
}
priv->otg_phy_mode = mode;
dwc3_meson_g12a_usb2_set_mode(priv, USB2_OTG_PHY, mode);
dwc3_meson_g12a_usb_otg_apply_mode(priv);
return 0;
}
static int dwc3_meson_g12a_role_set(struct device *dev, enum usb_role role)
{
struct dwc3_meson_g12a *priv = dev_get_drvdata(dev);
enum phy_mode mode;
if (role == USB_ROLE_NONE)
return 0;
mode = (role == USB_ROLE_HOST) ? PHY_MODE_USB_HOST
: PHY_MODE_USB_DEVICE;
if (mode == priv->otg_phy_mode)
return 0;
return dwc3_meson_g12a_otg_mode_set(priv, mode);
}
static enum usb_role dwc3_meson_g12a_role_get(struct device *dev)
{
struct dwc3_meson_g12a *priv = dev_get_drvdata(dev);
return priv->otg_phy_mode == PHY_MODE_USB_HOST ?
USB_ROLE_HOST : USB_ROLE_DEVICE;
}
static struct device *dwc3_meson_g12_find_child(struct device *dev,
const char *compatible)
{
struct platform_device *pdev;
struct device_node *np;
np = of_get_compatible_child(dev->of_node, compatible);
if (!np)
return NULL;
pdev = of_find_device_by_node(np);
of_node_put(np);
if (!pdev)
return NULL;
return &pdev->dev;
}
static int dwc3_meson_g12a_probe(struct platform_device *pdev)
{
struct dwc3_meson_g12a *priv;
struct device *dev = &pdev->dev;
struct device_node *np = dev->of_node;
void __iomem *base;
struct resource *res;
enum phy_mode otg_id;
int ret, i;
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
base = devm_ioremap_resource(dev, res);
if (IS_ERR(base))
return PTR_ERR(base);
priv->regmap = devm_regmap_init_mmio(dev, base,
&phy_meson_g12a_usb3_regmap_conf);
if (IS_ERR(priv->regmap))
return PTR_ERR(priv->regmap);
priv->vbus = devm_regulator_get_optional(dev, "vbus");
if (IS_ERR(priv->vbus)) {
if (PTR_ERR(priv->vbus) == -EPROBE_DEFER)
return PTR_ERR(priv->vbus);
priv->vbus = NULL;
}
priv->clk = devm_clk_get(dev, NULL);
if (IS_ERR(priv->clk))
return PTR_ERR(priv->clk);
ret = clk_prepare_enable(priv->clk);
if (ret)
return ret;
devm_add_action_or_reset(dev,
(void(*)(void *))clk_disable_unprepare,
priv->clk);
platform_set_drvdata(pdev, priv);
priv->dev = dev;
priv->reset = devm_reset_control_get(dev, NULL);
if (IS_ERR(priv->reset)) {
ret = PTR_ERR(priv->reset);
dev_err(dev, "failed to get device reset, err=%d\n", ret);
return ret;
}
ret = reset_control_reset(priv->reset);
if (ret)
return ret;
ret = dwc3_meson_g12a_get_phys(priv);
if (ret)
return ret;
if (priv->vbus) {
ret = regulator_enable(priv->vbus);
if (ret)
return ret;
}
/* Get dr_mode */
priv->otg_mode = usb_get_dr_mode(dev);
dwc3_meson_g12a_usb_init(priv);
/* Init PHYs */
for (i = 0 ; i < PHY_COUNT ; ++i) {
ret = phy_init(priv->phys[i]);
if (ret)
return ret;
}
/* Set PHY Power */
for (i = 0 ; i < PHY_COUNT ; ++i) {
ret = phy_power_on(priv->phys[i]);
if (ret)
goto err_phys_exit;
}
ret = of_platform_populate(np, NULL, NULL, dev);
if (ret) {
clk_disable_unprepare(priv->clk);
goto err_phys_power;
}
/* Setup OTG mode corresponding to the ID pin */
if (priv->otg_mode == USB_DR_MODE_OTG) {
/* TOFIX Handle ID mode toggling via IRQ */
otg_id = dwc3_meson_g12a_get_id(priv);
if (otg_id != priv->otg_phy_mode) {
if (dwc3_meson_g12a_otg_mode_set(priv, otg_id))
dev_warn(dev, "Failed to switch OTG mode\n");
}
}
/* Setup role switcher */
priv->switch_desc.usb2_port = dwc3_meson_g12_find_child(dev,
"snps,dwc3");
priv->switch_desc.udc = dwc3_meson_g12_find_child(dev, "snps,dwc2");
priv->switch_desc.allow_userspace_control = true;
priv->switch_desc.set = dwc3_meson_g12a_role_set;
priv->switch_desc.get = dwc3_meson_g12a_role_get;
priv->role_switch = usb_role_switch_register(dev, &priv->switch_desc);
if (IS_ERR(priv->role_switch))
dev_warn(dev, "Unable to register Role Switch\n");
pm_runtime_set_active(dev);
pm_runtime_enable(dev);
pm_runtime_get_sync(dev);
return 0;
err_phys_power:
for (i = 0 ; i < PHY_COUNT ; ++i)
phy_power_off(priv->phys[i]);
err_phys_exit:
for (i = 0 ; i < PHY_COUNT ; ++i)
phy_exit(priv->phys[i]);
return ret;
}
static int dwc3_meson_g12a_remove(struct platform_device *pdev)
{
struct dwc3_meson_g12a *priv = platform_get_drvdata(pdev);
struct device *dev = &pdev->dev;
int i;
usb_role_switch_unregister(priv->role_switch);
of_platform_depopulate(dev);
for (i = 0 ; i < PHY_COUNT ; ++i) {
phy_power_off(priv->phys[i]);
phy_exit(priv->phys[i]);
}
pm_runtime_disable(dev);
pm_runtime_put_noidle(dev);
pm_runtime_set_suspended(dev);
return 0;
}
static int __maybe_unused dwc3_meson_g12a_runtime_suspend(struct device *dev)
{
struct dwc3_meson_g12a *priv = dev_get_drvdata(dev);
clk_disable(priv->clk);
return 0;
}
static int __maybe_unused dwc3_meson_g12a_runtime_resume(struct device *dev)
{
struct dwc3_meson_g12a *priv = dev_get_drvdata(dev);
return clk_enable(priv->clk);
}
static int __maybe_unused dwc3_meson_g12a_suspend(struct device *dev)
{
struct dwc3_meson_g12a *priv = dev_get_drvdata(dev);
int i;
for (i = 0 ; i < PHY_COUNT ; ++i) {
phy_power_off(priv->phys[i]);
phy_exit(priv->phys[i]);
}
reset_control_assert(priv->reset);
return 0;
}
static int __maybe_unused dwc3_meson_g12a_resume(struct device *dev)
{
struct dwc3_meson_g12a *priv = dev_get_drvdata(dev);
int i, ret;
reset_control_deassert(priv->reset);
dwc3_meson_g12a_usb_init(priv);
/* Init PHYs */
for (i = 0 ; i < PHY_COUNT ; ++i) {
ret = phy_init(priv->phys[i]);
if (ret)
return ret;
}
/* Set PHY Power */
for (i = 0 ; i < PHY_COUNT ; ++i) {
ret = phy_power_on(priv->phys[i]);
if (ret)
return ret;
}
return 0;
}
static const struct dev_pm_ops dwc3_meson_g12a_dev_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(dwc3_meson_g12a_suspend, dwc3_meson_g12a_resume)
SET_RUNTIME_PM_OPS(dwc3_meson_g12a_runtime_suspend,
dwc3_meson_g12a_runtime_resume, NULL)
};
static const struct of_device_id dwc3_meson_g12a_match[] = {
{ .compatible = "amlogic,meson-g12a-usb-ctrl" },
{ /* Sentinel */ }
};
MODULE_DEVICE_TABLE(of, dwc3_meson_g12a_match);
static struct platform_driver dwc3_meson_g12a_driver = {
.probe = dwc3_meson_g12a_probe,
.remove = dwc3_meson_g12a_remove,
.driver = {
.name = "dwc3-meson-g12a",
.of_match_table = dwc3_meson_g12a_match,
.pm = &dwc3_meson_g12a_dev_pm_ops,
},
};
module_platform_driver(dwc3_meson_g12a_driver);
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("Amlogic Meson G12A USB Glue Layer");
MODULE_AUTHOR("Neil Armstrong <narmstrong@baylibre.com>");

95
drivers/usb/dwc3/dwc3-of-simple.c
View File

@ -24,59 +24,13 @@
struct dwc3_of_simple {
struct device *dev;
struct clk **clks;
struct clk_bulk_data *clks;
int num_clocks;
struct reset_control *resets;
bool pulse_resets;
bool need_reset;
};
static int dwc3_of_simple_clk_init(struct dwc3_of_simple *simple, int count)
{
struct device *dev = simple->dev;
struct device_node *np = dev->of_node;
int i;
simple->num_clocks = count;
if (!count)
return 0;
simple->clks = devm_kcalloc(dev, simple->num_clocks,
sizeof(struct clk *), GFP_KERNEL);
if (!simple->clks)
return -ENOMEM;
for (i = 0; i < simple->num_clocks; i++) {
struct clk *clk;
int ret;
clk = of_clk_get(np, i);
if (IS_ERR(clk)) {
while (--i >= 0) {
clk_disable_unprepare(simple->clks[i]);
clk_put(simple->clks[i]);
}
return PTR_ERR(clk);
}
ret = clk_prepare_enable(clk);
if (ret < 0) {
while (--i >= 0) {
clk_disable_unprepare(simple->clks[i]);
clk_put(simple->clks[i]);
}
clk_put(clk);
return ret;
}
simple->clks[i] = clk;
}
return 0;
}
static int dwc3_of_simple_probe(struct platform_device *pdev)
{
struct dwc3_of_simple *simple;
@ -84,7 +38,6 @@ static int dwc3_of_simple_probe(struct platform_device *pdev)
struct device_node *np = dev->of_node;
int ret;
int i;
bool shared_resets = false;
simple = devm_kzalloc(dev, sizeof(*simple), GFP_KERNEL);
@ -124,20 +77,18 @@ static int dwc3_of_simple_probe(struct platform_device *pdev)
goto err_resetc_put;
}
ret = dwc3_of_simple_clk_init(simple, of_count_phandle_with_args(np,
"clocks", "#clock-cells"));
ret = clk_bulk_get_all(simple->dev, &simple->clks);
if (ret < 0)
goto err_resetc_assert;
simple->num_clocks = ret;
ret = clk_bulk_prepare_enable(simple->num_clocks, simple->clks);
if (ret)
goto err_resetc_assert;
ret = of_platform_populate(np, NULL, NULL, dev);
if (ret) {
for (i = 0; i < simple->num_clocks; i++) {
clk_disable_unprepare(simple->clks[i]);
clk_put(simple->clks[i]);
}
goto err_resetc_assert;
}
if (ret)
goto err_clk_put;
pm_runtime_set_active(dev);
pm_runtime_enable(dev);
@ -145,6 +96,10 @@ static int dwc3_of_simple_probe(struct platform_device *pdev)
return 0;
err_clk_put:
clk_bulk_disable_unprepare(simple->num_clocks, simple->clks);
clk_bulk_put_all(simple->num_clocks, simple->clks);
err_resetc_assert:
if (!simple->pulse_resets)
reset_control_assert(simple->resets);
@ -158,14 +113,11 @@ static int dwc3_of_simple_remove(struct platform_device *pdev)
{
struct dwc3_of_simple *simple = platform_get_drvdata(pdev);
struct device *dev = &pdev->dev;
int i;
of_platform_depopulate(dev);
for (i = 0; i < simple->num_clocks; i++) {
clk_disable_unprepare(simple->clks[i]);
clk_put(simple->clks[i]);
}
clk_bulk_disable_unprepare(simple->num_clocks, simple->clks);
clk_bulk_put_all(simple->num_clocks, simple->clks);
simple->num_clocks = 0;
if (!simple->pulse_resets)
@ -183,10 +135,8 @@ static int dwc3_of_simple_remove(struct platform_device *pdev)
static int __maybe_unused dwc3_of_simple_runtime_suspend(struct device *dev)
{
struct dwc3_of_simple *simple = dev_get_drvdata(dev);
int i;
for (i = 0; i < simple->num_clocks; i++)
clk_disable(simple->clks[i]);
clk_bulk_disable(simple->num_clocks, simple->clks);
return 0;
}
@ -194,19 +144,8 @@ static int __maybe_unused dwc3_of_simple_runtime_suspend(struct device *dev)
static int __maybe_unused dwc3_of_simple_runtime_resume(struct device *dev)
{
struct dwc3_of_simple *simple = dev_get_drvdata(dev);
int ret;
int i;
for (i = 0; i < simple->num_clocks; i++) {
ret = clk_enable(simple->clks[i]);
if (ret < 0) {
while (--i >= 0)
clk_disable(simple->clks[i]);
return ret;
}
}
return 0;
return clk_bulk_enable(simple->num_clocks, simple->clks);
}
static int __maybe_unused dwc3_of_simple_suspend(struct device *dev)

5
drivers/usb/dwc3/gadget.c
View File

@ -2863,7 +2863,7 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc)
"LPM Erratum not available on dwc3 revisions < 2.40a\n");
if (dwc->has_lpm_erratum && dwc->revision >= DWC3_REVISION_240A)
reg |= DWC3_DCTL_LPM_ERRATA(dwc->lpm_nyet_threshold);
reg |= DWC3_DCTL_NYET_THRES(dwc->lpm_nyet_threshold);
dwc3_writel(dwc->regs, DWC3_DCTL, reg);
} else {
@ -3301,6 +3301,7 @@ int dwc3_gadget_init(struct dwc3 *dwc)
dwc->gadget.sg_supported = true;
dwc->gadget.name = "dwc3-gadget";
dwc->gadget.is_otg = dwc->dr_mode == USB_DR_MODE_OTG;
dwc->gadget.lpm_capable = true;
/*
* FIXME We might be setting max_speed to <SUPER, however versions
@ -3384,8 +3385,6 @@ int dwc3_gadget_suspend(struct dwc3 *dwc)
dwc3_disconnect_gadget(dwc);
__dwc3_gadget_stop(dwc);
synchronize_irq(dwc->irq_gadget);
return 0;
}

3
drivers/usb/gadget/function/f_fs.c
View File

@ -1133,7 +1133,8 @@ error_lock:
error_mutex:
mutex_unlock(&epfile->mutex);
error:
ffs_free_buffer(io_data);
if (ret != -EIOCBQUEUED) /* don't free if there is iocb queued */
ffs_free_buffer(io_data);
return ret;
}

57
drivers/usb/gadget/function/f_ncm.c
View File

@ -23,6 +23,7 @@
#include "u_ether.h"
#include "u_ether_configfs.h"
#include "u_ncm.h"
#include "configfs.h"
/*
* This function is a "CDC Network Control Model" (CDC NCM) Ethernet link.
@ -35,9 +36,7 @@
/* to trigger crc/non-crc ndp signature */
#define NCM_NDP_HDR_CRC_MASK 0x01000000
#define NCM_NDP_HDR_CRC 0x01000000
#define NCM_NDP_HDR_NOCRC 0x00000000
enum ncm_notify_state {
NCM_NOTIFY_NONE, /* don't notify */
@ -526,6 +525,7 @@ static inline void ncm_reset_values(struct f_ncm *ncm)
{
ncm->parser_opts = &ndp16_opts;
ncm->is_crc = false;
ncm->ndp_sign = ncm->parser_opts->ndp_sign;
ncm->port.cdc_filter = DEFAULT_FILTER;
/* doesn't make sense for ncm, fixed size used */
@ -805,25 +805,20 @@ static int ncm_setup(struct usb_function *f, const struct usb_ctrlrequest *ctrl)
case ((USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8)
| USB_CDC_SET_CRC_MODE:
{
int ndp_hdr_crc = 0;
if (w_length != 0 || w_index != ncm->ctrl_id)
goto invalid;
switch (w_value) {
case 0x0000:
ncm->is_crc = false;
ndp_hdr_crc = NCM_NDP_HDR_NOCRC;
DBG(cdev, "non-CRC mode selected\n");
break;
case 0x0001:
ncm->is_crc = true;
ndp_hdr_crc = NCM_NDP_HDR_CRC;
DBG(cdev, "CRC mode selected\n");
break;
default:
goto invalid;
}
ncm->ndp_sign = ncm->parser_opts->ndp_sign | ndp_hdr_crc;
value = 0;
break;
}
@ -840,6 +835,8 @@ invalid:
ctrl->bRequestType, ctrl->bRequest,
w_value, w_index, w_length);
}
ncm->ndp_sign = ncm->parser_opts->ndp_sign |
(ncm->is_crc ? NCM_NDP_HDR_CRC : 0);
/* respond with data transfer or status phase? */
if (value >= 0) {
@ -1395,6 +1392,16 @@ static int ncm_bind(struct usb_configuration *c, struct usb_function *f)
return -EINVAL;
ncm_opts = container_of(f->fi, struct f_ncm_opts, func_inst);
if (cdev->use_os_string) {
f->os_desc_table = kzalloc(sizeof(*f->os_desc_table),
GFP_KERNEL);
if (!f->os_desc_table)
return -ENOMEM;
f->os_desc_n = 1;
f->os_desc_table[0].os_desc = &ncm_opts->ncm_os_desc;
}
/*
* in drivers/usb/gadget/configfs.c:configfs_composite_bind()
* configurations are bound in sequence with list_for_each_entry,
@ -1408,13 +1415,15 @@ static int ncm_bind(struct usb_configuration *c, struct usb_function *f)
status = gether_register_netdev(ncm_opts->net);
mutex_unlock(&ncm_opts->lock);
if (status)
return status;
goto fail;
ncm_opts->bound = true;
}
us = usb_gstrings_attach(cdev, ncm_strings,
ARRAY_SIZE(ncm_string_defs));
if (IS_ERR(us))
return PTR_ERR(us);
if (IS_ERR(us)) {
status = PTR_ERR(us);
goto fail;
}
ncm_control_intf.iInterface = us[STRING_CTRL_IDX].id;
ncm_data_nop_intf.iInterface = us[STRING_DATA_IDX].id;
ncm_data_intf.iInterface = us[STRING_DATA_IDX].id;
@ -1431,6 +1440,10 @@ static int ncm_bind(struct usb_configuration *c, struct usb_function *f)
ncm_control_intf.bInterfaceNumber = status;
ncm_union_desc.bMasterInterface0 = status;
if (cdev->use_os_string)
f->os_desc_table[0].if_id =
ncm_iad_desc.bFirstInterface;
status = usb_interface_id(c, f);
if (status < 0)
goto fail;
@ -1510,6 +1523,9 @@ static int ncm_bind(struct usb_configuration *c, struct usb_function *f)
return 0;
fail:
kfree(f->os_desc_table);
f->os_desc_n = 0;
if (ncm->notify_req) {
kfree(ncm->notify_req->buf);
usb_ep_free_request(ncm->notify, ncm->notify_req);
@ -1564,16 +1580,22 @@ static void ncm_free_inst(struct usb_function_instance *f)
gether_cleanup(netdev_priv(opts->net));
else
free_netdev(opts->net);
kfree(opts->ncm_interf_group);
kfree(opts);
}
static struct usb_function_instance *ncm_alloc_inst(void)
{
struct f_ncm_opts *opts;
struct usb_os_desc *descs[1];
char *names[1];
struct config_group *ncm_interf_group;
opts = kzalloc(sizeof(*opts), GFP_KERNEL);
if (!opts)
return ERR_PTR(-ENOMEM);
opts->ncm_os_desc.ext_compat_id = opts->ncm_ext_compat_id;
mutex_init(&opts->lock);
opts->func_inst.free_func_inst = ncm_free_inst;
opts->net = gether_setup_default();
@ -1582,8 +1604,20 @@ static struct usb_function_instance *ncm_alloc_inst(void)
kfree(opts);
return ERR_CAST(net);
}
INIT_LIST_HEAD(&opts->ncm_os_desc.ext_prop);
descs[0] = &opts->ncm_os_desc;
names[0] = "ncm";
config_group_init_type_name(&opts->func_inst.group, "", &ncm_func_type);
ncm_interf_group =
usb_os_desc_prepare_interf_dir(&opts->func_inst.group, 1, descs,
names, THIS_MODULE);
if (IS_ERR(ncm_interf_group)) {
ncm_free_inst(&opts->func_inst);
return ERR_CAST(ncm_interf_group);
}
opts->ncm_interf_group = ncm_interf_group;
return &opts->func_inst;
}
@ -1609,6 +1643,9 @@ static void ncm_unbind(struct usb_configuration *c, struct usb_function *f)
hrtimer_cancel(&ncm->task_timer);
kfree(f->os_desc_table);
f->os_desc_n = 0;
ncm_string_defs[0].id = 0;
usb_free_all_descriptors(f);

6
drivers/usb/gadget/function/f_uac1_legacy.c
View File

@ -54,8 +54,8 @@ static struct uac1_ac_header_descriptor_1 ac_header_desc = {
.bLength = UAC_DT_AC_HEADER_LENGTH,
.bDescriptorType = USB_DT_CS_INTERFACE,
.bDescriptorSubtype = UAC_HEADER,
.bcdADC = __constant_cpu_to_le16(0x0100),
.wTotalLength = __constant_cpu_to_le16(UAC_DT_TOTAL_LENGTH),
.bcdADC = cpu_to_le16(0x0100),
.wTotalLength = cpu_to_le16(UAC_DT_TOTAL_LENGTH),
.bInCollection = F_AUDIO_NUM_INTERFACES,
.baInterfaceNr = {
/* Interface number of the first AudioStream interface */
@ -183,7 +183,7 @@ static struct uac_iso_endpoint_descriptor as_iso_out_desc = {
.bDescriptorSubtype = UAC_EP_GENERAL,
.bmAttributes = 1,
.bLockDelayUnits = 1,
.wLockDelay = __constant_cpu_to_le16(1),
.wLockDelay = cpu_to_le16(1),
};
static struct usb_descriptor_header *f_audio_desc[] = {

3
drivers/usb/gadget/function/u_ncm.h
View File

@ -20,6 +20,9 @@ struct f_ncm_opts {
struct net_device *net;
bool bound;
struct config_group *ncm_interf_group;
struct usb_os_desc ncm_os_desc;
char ncm_ext_compat_id[16];
/*
* Read/write access to configfs attributes is handled by configfs.
*

84
drivers/usb/gadget/udc/atmel_usba_udc.c
View File

@ -358,8 +358,20 @@ static inline u32 usba_int_enb_get(struct usba_udc *udc)
return udc->int_enb_cache;
}
static inline void usba_int_enb_set(struct usba_udc *udc, u32 val)
static inline void usba_int_enb_set(struct usba_udc *udc, u32 mask)
{
u32 val;
val = udc->int_enb_cache | mask;
usba_writel(udc, INT_ENB, val);
udc->int_enb_cache = val;
}
static inline void usba_int_enb_clear(struct usba_udc *udc, u32 mask)
{
u32 val;
val = udc->int_enb_cache & ~mask;
usba_writel(udc, INT_ENB, val);
udc->int_enb_cache = val;
}
@ -629,14 +641,12 @@ usba_ep_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
if (ep->can_dma) {
u32 ctrl;
usba_int_enb_set(udc, usba_int_enb_get(udc) |
USBA_BF(EPT_INT, 1 << ep->index) |
usba_int_enb_set(udc, USBA_BF(EPT_INT, 1 << ep->index) |
USBA_BF(DMA_INT, 1 << ep->index));
ctrl = USBA_AUTO_VALID | USBA_INTDIS_DMA;
usba_ep_writel(ep, CTL_ENB, ctrl);
} else {
usba_int_enb_set(udc, usba_int_enb_get(udc) |
USBA_BF(EPT_INT, 1 << ep->index));
usba_int_enb_set(udc, USBA_BF(EPT_INT, 1 << ep->index));
}
spin_unlock_irqrestore(&udc->lock, flags);
@ -680,8 +690,7 @@ static int usba_ep_disable(struct usb_ep *_ep)
usba_dma_readl(ep, STATUS);
}
usba_ep_writel(ep, CTL_DIS, USBA_EPT_ENABLE);
usba_int_enb_set(udc, usba_int_enb_get(udc) &
~USBA_BF(EPT_INT, 1 << ep->index));
usba_int_enb_clear(udc, USBA_BF(EPT_INT, 1 << ep->index));
request_complete_list(ep, &req_list, -ESHUTDOWN);
@ -1694,6 +1703,9 @@ static void usba_dma_irq(struct usba_udc *udc, struct usba_ep *ep)
}
}
static int start_clock(struct usba_udc *udc);
static void stop_clock(struct usba_udc *udc);
static irqreturn_t usba_udc_irq(int irq, void *devid)
{
struct usba_udc *udc = devid;
@ -1708,10 +1720,13 @@ static irqreturn_t usba_udc_irq(int irq, void *devid)
DBG(DBG_INT, "irq, status=%#08x\n", status);
if (status & USBA_DET_SUSPEND) {
usba_writel(udc, INT_CLR, USBA_DET_SUSPEND|USBA_WAKE_UP);
usba_int_enb_set(udc, USBA_WAKE_UP);
usba_int_enb_clear(udc, USBA_DET_SUSPEND);
udc->suspended = true;
toggle_bias(udc, 0);
usba_writel(udc, INT_CLR, USBA_DET_SUSPEND);
usba_int_enb_set(udc, int_enb | USBA_WAKE_UP);
udc->bias_pulse_needed = true;
stop_clock(udc);
DBG(DBG_BUS, "Suspend detected\n");
if (udc->gadget.speed != USB_SPEED_UNKNOWN
&& udc->driver && udc->driver->suspend) {
@ -1722,14 +1737,17 @@ static irqreturn_t usba_udc_irq(int irq, void *devid)
}
if (status & USBA_WAKE_UP) {
start_clock(udc);
toggle_bias(udc, 1);
usba_writel(udc, INT_CLR, USBA_WAKE_UP);
usba_int_enb_set(udc, int_enb & ~USBA_WAKE_UP);
DBG(DBG_BUS, "Wake Up CPU detected\n");
}
if (status & USBA_END_OF_RESUME) {
udc->suspended = false;
usba_writel(udc, INT_CLR, USBA_END_OF_RESUME);
usba_int_enb_clear(udc, USBA_WAKE_UP);
usba_int_enb_set(udc, USBA_DET_SUSPEND);
generate_bias_pulse(udc);
DBG(DBG_BUS, "Resume detected\n");
if (udc->gadget.speed != USB_SPEED_UNKNOWN
@ -1744,6 +1762,8 @@ static irqreturn_t usba_udc_irq(int irq, void *devid)
if (dma_status) {
int i;
usba_int_enb_set(udc, USBA_DET_SUSPEND);
for (i = 1; i <= USBA_NR_DMAS; i++)
if (dma_status & (1 << i))
usba_dma_irq(udc, &udc->usba_ep[i]);
@ -1753,6 +1773,8 @@ static irqreturn_t usba_udc_irq(int irq, void *devid)
if (ep_status) {
int i;
usba_int_enb_set(udc, USBA_DET_SUSPEND);
for (i = 0; i < udc->num_ep; i++)
if (ep_status & (1 << i)) {
if (ep_is_control(&udc->usba_ep[i]))
@ -1766,7 +1788,9 @@ static irqreturn_t usba_udc_irq(int irq, void *devid)
struct usba_ep *ep0, *ep;
int i, n;
usba_writel(udc, INT_CLR, USBA_END_OF_RESET);
usba_writel(udc, INT_CLR,
USBA_END_OF_RESET|USBA_END_OF_RESUME
|USBA_DET_SUSPEND|USBA_WAKE_UP);
generate_bias_pulse(udc);
reset_all_endpoints(udc);
@ -1793,7 +1817,12 @@ static irqreturn_t usba_udc_irq(int irq, void *devid)
| USBA_BF(BK_NUMBER, USBA_BK_NUMBER_ONE)));
usba_ep_writel(ep0, CTL_ENB,
USBA_EPT_ENABLE | USBA_RX_SETUP);
usba_int_enb_set(udc, int_enb | USBA_BF(EPT_INT, 1) |
/* If we get reset while suspended... */
udc->suspended = false;
usba_int_enb_clear(udc, USBA_WAKE_UP);
usba_int_enb_set(udc, USBA_BF(EPT_INT, 1) |
USBA_DET_SUSPEND | USBA_END_OF_RESUME);
/*
@ -1827,6 +1856,8 @@ static int start_clock(struct usba_udc *udc)
if (udc->clocked)
return 0;
pm_stay_awake(&udc->pdev->dev);
ret = clk_prepare_enable(udc->pclk);
if (ret)
return ret;
@ -1849,6 +1880,8 @@ static void stop_clock(struct usba_udc *udc)
clk_disable_unprepare(udc->pclk);
udc->clocked = false;
pm_relax(&udc->pdev->dev);
}
static int usba_start(struct usba_udc *udc)
@ -1860,9 +1893,19 @@ static int usba_start(struct usba_udc *udc)
if (ret)
return ret;
if (udc->suspended)
return 0;
spin_lock_irqsave(&udc->lock, flags);
toggle_bias(udc, 1);
usba_writel(udc, CTRL, USBA_ENABLE_MASK);
/* Clear all requested and pending interrupts... */
usba_writel(udc, INT_ENB, 0);
udc->int_enb_cache = 0;
usba_writel(udc, INT_CLR,
USBA_END_OF_RESET|USBA_END_OF_RESUME
|USBA_DET_SUSPEND|USBA_WAKE_UP);
/* ...and enable just 'reset' IRQ to get us started */
usba_int_enb_set(udc, USBA_END_OF_RESET);
spin_unlock_irqrestore(&udc->lock, flags);
@ -1873,6 +1916,9 @@ static void usba_stop(struct usba_udc *udc)
{
unsigned long flags;
if (udc->suspended)
return;
spin_lock_irqsave(&udc->lock, flags);
udc->gadget.speed = USB_SPEED_UNKNOWN;
reset_all_endpoints(udc);
@ -1900,6 +1946,7 @@ static irqreturn_t usba_vbus_irq_thread(int irq, void *devid)
if (vbus) {
usba_start(udc);
} else {
udc->suspended = false;
usba_stop(udc);
if (udc->driver->disconnect)
@ -1963,6 +2010,7 @@ static int atmel_usba_stop(struct usb_gadget *gadget)
if (fifo_mode == 0)
udc->configured_ep = 1;
udc->suspended = false;
usba_stop(udc);
udc->driver = NULL;
@ -2276,6 +2324,7 @@ static int usba_udc_suspend(struct device *dev)
mutex_lock(&udc->vbus_mutex);
if (!device_may_wakeup(dev)) {
udc->suspended = false;
usba_stop(udc);
goto out;
}
@ -2285,10 +2334,13 @@ static int usba_udc_suspend(struct device *dev)
* to request vbus irq, assuming always on.
*/
if (udc->vbus_pin) {
/* FIXME: right to stop here...??? */
usba_stop(udc);
enable_irq_wake(gpiod_to_irq(udc->vbus_pin));
}
enable_irq_wake(udc->irq);
out:
mutex_unlock(&udc->vbus_mutex);
return 0;
@ -2302,8 +2354,12 @@ static int usba_udc_resume(struct device *dev)
if (!udc->driver)
return 0;
if (device_may_wakeup(dev) && udc->vbus_pin)
disable_irq_wake(gpiod_to_irq(udc->vbus_pin));
if (device_may_wakeup(dev)) {
if (udc->vbus_pin)
disable_irq_wake(gpiod_to_irq(udc->vbus_pin));
disable_irq_wake(udc->irq);
}
/* If Vbus is present, enable the controller and wait for reset */
mutex_lock(&udc->vbus_mutex);

1
drivers/usb/gadget/udc/atmel_usba_udc.h
View File

@ -331,6 +331,7 @@ struct usba_udc {
struct usba_ep *usba_ep;
bool bias_pulse_needed;
bool clocked;
bool suspended;
u16 devstatus;

19
drivers/usb/gadget/udc/dummy_hcd.c
View File

@ -965,8 +965,18 @@ static int dummy_udc_start(struct usb_gadget *g,
struct dummy_hcd *dum_hcd = gadget_to_dummy_hcd(g);
struct dummy *dum = dum_hcd->dum;
if (driver->max_speed == USB_SPEED_UNKNOWN)
switch (g->speed) {
/* All the speeds we support */
case USB_SPEED_LOW:
case USB_SPEED_FULL:
case USB_SPEED_HIGH:
case USB_SPEED_SUPER:
break;
default:
dev_err(dummy_dev(dum_hcd), "Unsupported driver max speed %d\n",
driver->max_speed);
return -EINVAL;
}
/*
* SLAVE side init ... the layer above hardware, which
@ -1770,9 +1780,10 @@ static void dummy_timer(struct timer_list *t)
/* Bus speed is 500000 bytes/ms, so use a little less */
total = 490000;
break;
default:
default: /* Can't happen */
dev_err(dummy_dev(dum_hcd), "bogus device speed\n");
return;
total = 0;
break;
}
/* FIXME if HZ != 1000 this will probably misbehave ... */
@ -1814,7 +1825,7 @@ restart:
/* Used up this frame's bandwidth? */
if (total <= 0)
break;
continue;
/* find the gadget's ep for this request (if configured) */
address = usb_pipeendpoint (urb->pipe);

167
drivers/usb/gadget/udc/lpc32xx_udc.c
View File

@ -115,6 +115,11 @@ struct lpc32xx_ep {
bool wedge;
};
enum atx_type {
ISP1301,
STOTG04,
};
/*
* Common UDC structure
*/
@ -129,8 +134,6 @@ struct lpc32xx_udc {
/* Board and device specific */
struct lpc32xx_usbd_cfg *board;
u32 io_p_start;
u32 io_p_size;
void __iomem *udp_baseaddr;
int udp_irq[4];
struct clk *usb_slv_clk;
@ -151,10 +154,10 @@ struct lpc32xx_udc {
u8 last_vbus;
int pullup;
int poweron;
enum atx_type atx;
/* Work queues related to I2C support */
struct work_struct pullup_job;
struct work_struct vbus_job;
struct work_struct power_job;
/* USB device peripheral - various */
@ -553,6 +556,15 @@ static inline void remove_debug_file(struct lpc32xx_udc *udc) {}
/* Primary initialization sequence for the ISP1301 transceiver */
static void isp1301_udc_configure(struct lpc32xx_udc *udc)
{
u8 value;
s32 vendor, product;
vendor = i2c_smbus_read_word_data(udc->isp1301_i2c_client, 0x00);
product = i2c_smbus_read_word_data(udc->isp1301_i2c_client, 0x02);
if (vendor == 0x0483 && product == 0xa0c4)
udc->atx = STOTG04;
/* LPC32XX only supports DAT_SE0 USB mode */
/* This sequence is important */
@ -572,8 +584,12 @@ static void isp1301_udc_configure(struct lpc32xx_udc *udc)
*/
i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
(ISP1301_I2C_MODE_CONTROL_2 | ISP1301_I2C_REG_CLEAR_ADDR), ~0);
value = MC2_BI_DI;
if (udc->atx != STOTG04)
value |= MC2_SPD_SUSP_CTRL;
i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
ISP1301_I2C_MODE_CONTROL_2, (MC2_BI_DI | MC2_SPD_SUSP_CTRL));
ISP1301_I2C_MODE_CONTROL_2, value);
/* Driver VBUS_DRV high or low depending on board setup */
if (udc->board->vbus_drv_pol != 0)
@ -601,24 +617,19 @@ static void isp1301_udc_configure(struct lpc32xx_udc *udc)
(ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR),
OTG1_VBUS_DISCHRG);
/* Clear and enable VBUS high edge interrupt */
i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
ISP1301_I2C_INTERRUPT_LATCH | ISP1301_I2C_REG_CLEAR_ADDR, ~0);
i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
ISP1301_I2C_INTERRUPT_FALLING | ISP1301_I2C_REG_CLEAR_ADDR, ~0);
i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
ISP1301_I2C_INTERRUPT_FALLING, INT_VBUS_VLD);
i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
ISP1301_I2C_INTERRUPT_RISING | ISP1301_I2C_REG_CLEAR_ADDR, ~0);
i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
ISP1301_I2C_INTERRUPT_RISING, INT_VBUS_VLD);
dev_info(udc->dev, "ISP1301 Vendor ID : 0x%04x\n",
i2c_smbus_read_word_data(udc->isp1301_i2c_client, 0x00));
dev_info(udc->dev, "ISP1301 Product ID : 0x%04x\n",
i2c_smbus_read_word_data(udc->isp1301_i2c_client, 0x02));
dev_info(udc->dev, "ISP1301 Vendor ID : 0x%04x\n", vendor);
dev_info(udc->dev, "ISP1301 Product ID : 0x%04x\n", product);
dev_info(udc->dev, "ISP1301 Version ID : 0x%04x\n",
i2c_smbus_read_word_data(udc->isp1301_i2c_client, 0x14));
}
/* Enables or disables the USB device pullup via the ISP1301 transceiver */
@ -661,6 +672,10 @@ static void isp1301_pullup_enable(struct lpc32xx_udc *udc, int en_pullup,
/* Powers up or down the ISP1301 transceiver */
static void isp1301_set_powerstate(struct lpc32xx_udc *udc, int enable)
{
/* There is no "global power down" register for stotg04 */
if (udc->atx == STOTG04)
return;
if (enable != 0)
/* Power up ISP1301 - this ISP1301 will automatically wakeup
when VBUS is detected */
@ -2830,11 +2845,9 @@ static irqreturn_t lpc32xx_usb_devdma_irq(int irq, void *_udc)
* VBUS detection, pullup handler, and Gadget cable state notification
*
*/
static void vbus_work(struct work_struct *work)
static void vbus_work(struct lpc32xx_udc *udc)
{
u8 value;
struct lpc32xx_udc *udc = container_of(work, struct lpc32xx_udc,
vbus_job);
if (udc->enabled != 0) {
/* Discharge VBUS real quick */
@ -2870,18 +2883,13 @@ static void vbus_work(struct work_struct *work)
lpc32xx_vbus_session(&udc->gadget, udc->vbus);
}
}
/* Re-enable after completion */
enable_irq(udc->udp_irq[IRQ_USB_ATX]);
}
static irqreturn_t lpc32xx_usb_vbus_irq(int irq, void *_udc)
{
struct lpc32xx_udc *udc = _udc;
/* Defer handling of VBUS IRQ to work queue */
disable_irq_nosync(udc->udp_irq[IRQ_USB_ATX]);
schedule_work(&udc->vbus_job);
vbus_work(udc);
return IRQ_HANDLED;
}
@ -2890,7 +2898,6 @@ static int lpc32xx_start(struct usb_gadget *gadget,
struct usb_gadget_driver *driver)
{
struct lpc32xx_udc *udc = to_udc(gadget);
int i;
if (!driver || driver->max_speed < USB_SPEED_FULL || !driver->setup) {
dev_err(udc->dev, "bad parameter.\n");
@ -2910,22 +2917,25 @@ static int lpc32xx_start(struct usb_gadget *gadget,
/* Force VBUS process once to check for cable insertion */
udc->last_vbus = udc->vbus = 0;
schedule_work(&udc->vbus_job);
vbus_work(udc);
/* Do not re-enable ATX IRQ (3) */
for (i = IRQ_USB_LP; i < IRQ_USB_ATX; i++)
enable_irq(udc->udp_irq[i]);
/* enable interrupts */
i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
ISP1301_I2C_INTERRUPT_FALLING, INT_SESS_VLD | INT_VBUS_VLD);
i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
ISP1301_I2C_INTERRUPT_RISING, INT_SESS_VLD | INT_VBUS_VLD);
return 0;
}
static int lpc32xx_stop(struct usb_gadget *gadget)
{
int i;
struct lpc32xx_udc *udc = to_udc(gadget);
for (i = IRQ_USB_LP; i <= IRQ_USB_ATX; i++)
disable_irq(udc->udp_irq[i]);
i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
ISP1301_I2C_INTERRUPT_FALLING | ISP1301_I2C_REG_CLEAR_ADDR, ~0);
i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
ISP1301_I2C_INTERRUPT_RISING | ISP1301_I2C_REG_CLEAR_ADDR, ~0);
if (udc->clocked) {
spin_lock(&udc->lock);
@ -2999,7 +3009,7 @@ static int lpc32xx_udc_probe(struct platform_device *pdev)
dma_addr_t dma_handle;
struct device_node *isp1301_node;
udc = kmemdup(&controller_template, sizeof(*udc), GFP_KERNEL);
udc = devm_kmemdup(dev, &controller_template, sizeof(*udc), GFP_KERNEL);
if (!udc)
return -ENOMEM;
@ -3022,8 +3032,7 @@ static int lpc32xx_udc_probe(struct platform_device *pdev)
udc->isp1301_i2c_client = isp1301_get_client(isp1301_node);
if (!udc->isp1301_i2c_client) {
retval = -EPROBE_DEFER;
goto phy_fail;
return -EPROBE_DEFER;
}
dev_info(udc->dev, "ISP1301 I2C device at address 0x%x\n",
@ -3032,7 +3041,7 @@ static int lpc32xx_udc_probe(struct platform_device *pdev)
pdev->dev.dma_mask = &lpc32xx_usbd_dmamask;
retval = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
if (retval)
goto resource_fail;
return retval;
udc->board = &lpc32xx_usbddata;
@ -3045,10 +3054,8 @@ static int lpc32xx_udc_probe(struct platform_device *pdev)
* IORESOURCE_IRQ, USB transceiver interrupt number
*/
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
retval = -ENXIO;
goto resource_fail;
}
if (!res)
return -ENXIO;
spin_lock_init(&udc->lock);
@ -3058,45 +3065,33 @@ static int lpc32xx_udc_probe(struct platform_device *pdev)
if (udc->udp_irq[i] < 0) {
dev_err(udc->dev,
"irq resource %d not available!\n", i);
retval = udc->udp_irq[i];
goto irq_fail;
return udc->udp_irq[i];
}
}
udc->io_p_start = res->start;
udc->io_p_size = resource_size(res);
if (!request_mem_region(udc->io_p_start, udc->io_p_size, driver_name)) {
dev_err(udc->dev, "someone's using UDC memory\n");
retval = -EBUSY;
goto request_mem_region_fail;
}
udc->udp_baseaddr = ioremap(udc->io_p_start, udc->io_p_size);
udc->udp_baseaddr = devm_ioremap_resource(dev, res);
if (!udc->udp_baseaddr) {
retval = -ENOMEM;
dev_err(udc->dev, "IO map failure\n");
goto io_map_fail;
return -ENOMEM;
}
/* Get USB device clock */
udc->usb_slv_clk = clk_get(&pdev->dev, NULL);
udc->usb_slv_clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(udc->usb_slv_clk)) {
dev_err(udc->dev, "failed to acquire USB device clock\n");
retval = PTR_ERR(udc->usb_slv_clk);
goto usb_clk_get_fail;
return PTR_ERR(udc->usb_slv_clk);
}
/* Enable USB device clock */
retval = clk_prepare_enable(udc->usb_slv_clk);
if (retval < 0) {
dev_err(udc->dev, "failed to start USB device clock\n");
goto usb_clk_enable_fail;
return retval;
}
/* Setup deferred workqueue data */
udc->poweron = udc->pullup = 0;
INIT_WORK(&udc->pullup_job, pullup_work);
INIT_WORK(&udc->vbus_job, vbus_work);
#ifdef CONFIG_PM
INIT_WORK(&udc->power_job, power_work);
#endif
@ -3134,47 +3129,44 @@ static int lpc32xx_udc_probe(struct platform_device *pdev)
/* Request IRQs - low and high priority USB device IRQs are routed to
* the same handler, while the DMA interrupt is routed elsewhere */
retval = request_irq(udc->udp_irq[IRQ_USB_LP], lpc32xx_usb_lp_irq,
0, "udc_lp", udc);
retval = devm_request_irq(dev, udc->udp_irq[IRQ_USB_LP],
lpc32xx_usb_lp_irq, 0, "udc_lp", udc);
if (retval < 0) {
dev_err(udc->dev, "LP request irq %d failed\n",
udc->udp_irq[IRQ_USB_LP]);
goto irq_lp_fail;
goto irq_req_fail;
}
retval = request_irq(udc->udp_irq[IRQ_USB_HP], lpc32xx_usb_hp_irq,
0, "udc_hp", udc);
retval = devm_request_irq(dev, udc->udp_irq[IRQ_USB_HP],
lpc32xx_usb_hp_irq, 0, "udc_hp", udc);
if (retval < 0) {
dev_err(udc->dev, "HP request irq %d failed\n",
udc->udp_irq[IRQ_USB_HP]);
goto irq_hp_fail;
goto irq_req_fail;
}
retval = request_irq(udc->udp_irq[IRQ_USB_DEVDMA],
lpc32xx_usb_devdma_irq, 0, "udc_dma", udc);
retval = devm_request_irq(dev, udc->udp_irq[IRQ_USB_DEVDMA],
lpc32xx_usb_devdma_irq, 0, "udc_dma", udc);
if (retval < 0) {
dev_err(udc->dev, "DEV request irq %d failed\n",
udc->udp_irq[IRQ_USB_DEVDMA]);
goto irq_dev_fail;
goto irq_req_fail;
}
/* The transceiver interrupt is used for VBUS detection and will
kick off the VBUS handler function */
retval = request_irq(udc->udp_irq[IRQ_USB_ATX], lpc32xx_usb_vbus_irq,
0, "udc_otg", udc);
retval = devm_request_threaded_irq(dev, udc->udp_irq[IRQ_USB_ATX], NULL,
lpc32xx_usb_vbus_irq, IRQF_ONESHOT,
"udc_otg", udc);
if (retval < 0) {
dev_err(udc->dev, "VBUS request irq %d failed\n",
udc->udp_irq[IRQ_USB_ATX]);
goto irq_xcvr_fail;
goto irq_req_fail;
}
/* Initialize wait queue */
init_waitqueue_head(&udc->ep_disable_wait_queue);
atomic_set(&udc->enabled_ep_cnt, 0);
/* Keep all IRQs disabled until GadgetFS starts up */
for (i = IRQ_USB_LP; i <= IRQ_USB_ATX; i++)
disable_irq(udc->udp_irq[i]);
retval = usb_add_gadget_udc(dev, &udc->gadget);
if (retval < 0)
goto add_gadget_fail;
@ -3190,32 +3182,15 @@ static int lpc32xx_udc_probe(struct platform_device *pdev)
return 0;
add_gadget_fail:
free_irq(udc->udp_irq[IRQ_USB_ATX], udc);
irq_xcvr_fail:
free_irq(udc->udp_irq[IRQ_USB_DEVDMA], udc);
irq_dev_fail:
free_irq(udc->udp_irq[IRQ_USB_HP], udc);
irq_hp_fail:
free_irq(udc->udp_irq[IRQ_USB_LP], udc);
irq_lp_fail:
irq_req_fail:
dma_pool_destroy(udc->dd_cache);
dma_alloc_fail:
dma_free_coherent(&pdev->dev, UDCA_BUFF_SIZE,
udc->udca_v_base, udc->udca_p_base);
i2c_fail:
clk_disable_unprepare(udc->usb_slv_clk);
usb_clk_enable_fail:
clk_put(udc->usb_slv_clk);
usb_clk_get_fail:
iounmap(udc->udp_baseaddr);
io_map_fail:
release_mem_region(udc->io_p_start, udc->io_p_size);
dev_err(udc->dev, "%s probe failed, %d\n", driver_name, retval);
request_mem_region_fail:
irq_fail:
resource_fail:
phy_fail:
kfree(udc);
return retval;
}
@ -3231,24 +3206,14 @@ static int lpc32xx_udc_remove(struct platform_device *pdev)
udc_disable(udc);
pullup(udc, 0);
free_irq(udc->udp_irq[IRQ_USB_ATX], udc);
device_init_wakeup(&pdev->dev, 0);
remove_debug_file(udc);
dma_pool_destroy(udc->dd_cache);
dma_free_coherent(&pdev->dev, UDCA_BUFF_SIZE,
udc->udca_v_base, udc->udca_p_base);
free_irq(udc->udp_irq[IRQ_USB_DEVDMA], udc);
free_irq(udc->udp_irq[IRQ_USB_HP], udc);
free_irq(udc->udp_irq[IRQ_USB_LP], udc);
clk_disable_unprepare(udc->usb_slv_clk);
clk_put(udc->usb_slv_clk);
iounmap(udc->udp_baseaddr);
release_mem_region(udc->io_p_start, udc->io_p_size);
kfree(udc);
return 0;
}

3
drivers/usb/gadget/udc/net2272.c
View File

@ -573,8 +573,7 @@ net2272_read_fifo(struct net2272_ep *ep, struct net2272_request *req)
/* completion */
if (unlikely(cleanup || is_short ||
((req->req.actual == req->req.length)
&& !req->req.zero))) {
req->req.actual == req->req.length)) {
if (cleanup) {
net2272_out_flush(ep);

5
drivers/usb/gadget/udc/net2280.c
View File

@ -789,8 +789,7 @@ static int read_fifo(struct net2280_ep *ep, struct net2280_request *req)
(void) readl(&ep->regs->ep_rsp);
}
return is_short || ((req->req.actual == req->req.length) &&
!req->req.zero);
return is_short || req->req.actual == req->req.length;
}
/* fill out dma descriptor to match a given request */
@ -1058,7 +1057,7 @@ net2280_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
/* PIO ... stuff the fifo, or unblock it. */
if (ep->is_in)
write_fifo(ep, _req);
else if (list_empty(&ep->queue)) {
else {
u32 s;
/* OUT FIFO might have packet(s) buffered */

2
drivers/usb/phy/Kconfig
View File

@ -21,7 +21,7 @@ config AB8500_USB
in host mode, low speed.
config FSL_USB2_OTG
bool "Freescale USB OTG Transceiver Driver"
tristate "Freescale USB OTG Transceiver Driver"
depends on USB_EHCI_FSL && USB_FSL_USB2 && USB_OTG_FSM=y && PM
depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, this can't be 'y'
select USB_PHY

5
include/linux/usb/hcd.h
View File

@ -653,11 +653,16 @@ extern wait_queue_head_t usb_kill_urb_queue;
#define usb_endpoint_out(ep_dir) (!((ep_dir) & USB_DIR_IN))
#ifdef CONFIG_PM
extern unsigned usb_wakeup_enabled_descendants(struct usb_device *udev);
extern void usb_root_hub_lost_power(struct usb_device *rhdev);
extern int hcd_bus_suspend(struct usb_device *rhdev, pm_message_t msg);
extern int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg);
extern void usb_hcd_resume_root_hub(struct usb_hcd *hcd);
#else
static inline unsigned usb_wakeup_enabled_descendants(struct usb_device *udev)
{
return 0;
}
static inline void usb_hcd_resume_root_hub(struct usb_hcd *hcd)
{
return;