korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-11-23 20:24:12 +08:00
Code Issues Packages Projects Releases Wiki Activity

tracing: Documentation for in-kernel synthetic event API

Browse Source 
Add Documentation for creating and generating synthetic events from
modules.

Link: http://lkml.kernel.org/r/734bf8789ff8700000c9acde61a553427910ddb5.1580323897.git.zanussi@kernel.org

Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
This commit is contained in:
Tom Zanussi 2020-01-29 12:59:32 -06:00 committed by Steven Rostedt (VMware)
parent 64836248dd
commit 34ed63573b
1 changed files with 515 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

515
Documentation/trace/events.rst
View File

@ -525,3 +525,518 @@ The following commands are supported:
event counts (hitcount).
See Documentation/trace/histogram.rst for details and examples.
6.3 In-kernel trace event API
-----------------------------
In most cases, the command-line interface to trace events is more than
sufficient. Sometimes, however, applications might find the need for
more complex relationships than can be expressed through a simple
series of linked command-line expressions, or putting together sets of
commands may be simply too cumbersome. An example might be an
application that needs to 'listen' to the trace stream in order to
maintain an in-kernel state machine detecting, for instance, when an
illegal kernel state occurs in the scheduler.
The trace event subsystem provides an in-kernel API allowing modules
or other kernel code to generate user-defined 'synthetic' events at
will, which can be used to either augment the existing trace stream
and/or signal that a particular important state has occurred.
A similar in-kernel API is also available for creating kprobe and
kretprobe events.
Both the synthetic event and k/ret/probe event APIs are built on top
of a lower-level "dynevent_cmd" event command API, which is also
available for more specialized applications, or as the basis of other
higher-level trace event APIs.
The API provided for these purposes is describe below and allows the
following:
- dynamically creating synthetic event definitions
- dynamically creating kprobe and kretprobe event definitions
- tracing synthetic events from in-kernel code
- the low-level "dynevent_cmd" API
6.3.1 Dyamically creating synthetic event definitions
-----------------------------------------------------
There are a couple ways to create a new synthetic event from a kernel
module or other kernel code.
The first creates the event in one step, using synth_event_create().
In this method, the name of the event to create and an array defining
the fields is supplied to synth_event_create(). If successful, a
synthetic event with that name and fields will exist following that
call. For example, to create a new "schedtest" synthetic event:
ret = synth_event_create("schedtest", sched_fields,
ARRAY_SIZE(sched_fields), THIS_MODULE);
The sched_fields param in this example points to an array of struct
synth_field_desc, each of which describes an event field by type and
name:
static struct synth_field_desc sched_fields[] = {
{ .type = "pid_t", .name = "next_pid_field" },
{ .type = "char[16]", .name = "next_comm_field" },
{ .type = "u64", .name = "ts_ns" },
{ .type = "u64", .name = "ts_ms" },
{ .type = "unsigned int", .name = "cpu" },
{ .type = "char[64]", .name = "my_string_field" },
{ .type = "int", .name = "my_int_field" },
};
See synth_field_size() for available types. If field_name contains [n]
the field is considered to be an array.
If the event is created from within a module, a pointer to the module
must be passed to synth_event_create(). This will ensure that the
trace buffer won't contain unreadable events when the module is
removed.
At this point, the event object is ready to be used for generating new
events.
In the second method, the event is created in several steps. This
allows events to be created dynamically and without the need to create
and populate an array of fields beforehand.
To use this method, an empty or partially empty synthetic event should
first be created using synth_event_gen_cmd_start() or
synth_event_gen_cmd_array_start(). For synth_event_gen_cmd_start(),
the name of the event along with one or more pairs of args each pair
representing a 'type field_name;' field specification should be
supplied. For synth_event_gen_cmd_array_start(), the name of the
event along with an array of struct synth_field_desc should be
supplied. Before calling synth_event_gen_cmd_start() or
synth_event_gen_cmd_array_start(), the user should create and
initialize a dynevent_cmd object using synth_event_cmd_init().
For example, to create a new "schedtest" synthetic event with two
fields:
struct dynevent_cmd cmd;
char *buf;
/* Create a buffer to hold the generated command */
buf = kzalloc(MAX_DYNEVENT_CMD_LEN, GFP_KERNEL);
/* Before generating the command, initialize the cmd object */
synth_event_cmd_init(&cmd, buf, MAX_DYNEVENT_CMD_LEN);
ret = synth_event_gen_cmd_start(&cmd, "schedtest", THIS_MODULE,
"pid_t", "next_pid_field",
"u64", "ts_ns");
Alternatively, using an array of struct synth_field_desc fields
containing the same information:
ret = synth_event_gen_cmd_array_start(&cmd, "schedtest", THIS_MODULE,
fields, n_fields);
Once the synthetic event object has been created, it can then be
populated with more fields. Fields are added one by one using
synth_event_add_field(), supplying the dynevent_cmd object, a field
type, and a field name. For example, to add a new int field named
"intfield", the following call should be made:
ret = synth_event_add_field(&cmd, "int", "intfield");
See synth_field_size() for available types. If field_name contains [n]
the field is considered to be an array.
A group of fields can also be added all at once using an array of
synth_field_desc with add_synth_fields(). For example, this would add
just the first four sched_fields:
ret = synth_event_add_fields(&cmd, sched_fields, 4);
If you already have a string of the form 'type field_name',
synth_event_add_field_str() can be used to add it as-is; it will
also automatically append a ';' to the string.
Once all the fields have been added, the event should be finalized and
registered by calling the synth_event_gen_cmd_end() function:
ret = synth_event_gen_cmd_end(&cmd);
At this point, the event object is ready to be used for tracing new
events.
6.3.3 Tracing synthetic events from in-kernel code
--------------------------------------------------
To trace a synthetic event, there are several options. The first
option is to trace the event in one call, using synth_event_trace()
with a variable number of values, or synth_event_trace_array() with an
array of values to be set. A second option can be used to avoid the
need for a pre-formed array of values or list of arguments, via
synth_event_trace_start() and synth_event_trace_end() along with
synth_event_add_next_val() or synth_event_add_val() to add the values
piecewise.
6.3.3.1 Tracing a synthetic event all at once
---------------------------------------------
To trace a synthetic event all at once, the synth_event_trace() or
synth_event_trace_array() functions can be used.
The synth_event_trace() function is passed the trace_event_file
representing the synthetic event (which can be retrieved using
trace_get_event_file() using the synthetic event name, "synthetic" as
the system name, and the trace instance name (NULL if using the global
trace array)), along with an variable number of u64 args, one for each
synthetic event field, and the number of values being passed.
So, to trace an event corresponding to the synthetic event definition
above, code like the following could be used:
ret = synth_event_trace(create_synth_test, 7, /* number of values */
444, /* next_pid_field */
(u64)"clackers", /* next_comm_field */
1000000, /* ts_ns */
1000, /* ts_ms */
smp_processor_id(),/* cpu */
(u64)"Thneed", /* my_string_field */
999); /* my_int_field */
All vals should be cast to u64, and string vals are just pointers to
strings, cast to u64. Strings will be copied into space reserved in
the event for the string, using these pointers.
Alternatively, the synth_event_trace_array() function can be used to
accomplish the same thing. It is passed the trace_event_file
representing the synthetic event (which can be retrieved using
trace_get_event_file() using the synthetic event name, "synthetic" as
the system name, and the trace instance name (NULL if using the global
trace array)), along with an array of u64, one for each synthetic
event field.
To trace an event corresponding to the synthetic event definition
above, code like the following could be used:
u64 vals[7];
vals[0] = 777; /* next_pid_field */
vals[1] = (u64)"tiddlywinks"; /* next_comm_field */
vals[2] = 1000000; /* ts_ns */
vals[3] = 1000; /* ts_ms */
vals[4] = smp_processor_id(); /* cpu */
vals[5] = (u64)"thneed"; /* my_string_field */
vals[6] = 398; /* my_int_field */
The 'vals' array is just an array of u64, the number of which must
match the number of field in the synthetic event, and which must be in
the same order as the synthetic event fields.
All vals should be cast to u64, and string vals are just pointers to
strings, cast to u64. Strings will be copied into space reserved in
the event for the string, using these pointers.
In order to trace a synthetic event, a pointer to the trace event file
is needed. The trace_get_event_file() function can be used to get
it - it will find the file in the given trace instance (in this case
NULL since the top trace array is being used) while at the same time
preventing the instance containing it from going away:
schedtest_event_file = trace_get_event_file(NULL, "synthetic",
"schedtest");
Before tracing the event, it should be enabled in some way, otherwise
the synthetic event won't actually show up in the trace buffer.
To enable a synthetic event from the kernel, trace_array_set_clr_event()
can be used (which is not specific to synthetic events, so does need
the "synthetic" system name to be specified explicitly).
To enable the event, pass 'true' to it:
trace_array_set_clr_event(schedtest_event_file->tr,
"synthetic", "schedtest", true);
To disable it pass false:
trace_array_set_clr_event(schedtest_event_file->tr,
"synthetic", "schedtest", false);
Finally, synth_event_trace_array() can be used to actually trace the
event, which should be visible in the trace buffer afterwards:
ret = synth_event_trace_array(schedtest_event_file, vals,
ARRAY_SIZE(vals));
To remove the synthetic event, the event should be disabled, and the
trace instance should be 'put' back using trace_put_event_file():
trace_array_set_clr_event(schedtest_event_file->tr,
"synthetic", "schedtest", false);
trace_put_event_file(schedtest_event_file);
If those have been successful, synth_event_delete() can be called to
remove the event:
ret = synth_event_delete("schedtest");
6.3.3.1 Tracing a synthetic event piecewise
-------------------------------------------
To trace a synthetic using the piecewise method described above, the
synth_event_trace_start() function is used to 'open' the synthetic
event trace:
struct synth_trace_state trace_state;
ret = synth_event_trace_start(schedtest_event_file, &trace_state);
It's passed the trace_event_file representing the synthetic event
using the same methods as described above, along with a pointer to a
struct synth_trace_state object, which will be zeroed before use and
used to maintain state between this and following calls.
Once the event has been opened, which means space for it has been
reserved in the trace buffer, the individual fields can be set. There
are two ways to do that, either one after another for each field in
the event, which requires no lookups, or by name, which does. The
tradeoff is flexibility in doing the assignments vs the cost of a
lookup per field.
To assign the values one after the other without lookups,
synth_event_add_next_val() should be used. Each call is passed the
same synth_trace_state object used in the synth_event_trace_start(),
along with the value to set the next field in the event. After each
field is set, the 'cursor' points to the next field, which will be set
by the subsequent call, continuing until all the fields have been set
in order. The same sequence of calls as in the above examples using
this method would be (without error-handling code):
/* next_pid_field */
ret = synth_event_add_next_val(777, &trace_state);
/* next_comm_field */
ret = synth_event_add_next_val((u64)"slinky", &trace_state);
/* ts_ns */
ret = synth_event_add_next_val(1000000, &trace_state);
/* ts_ms */
ret = synth_event_add_next_val(1000, &trace_state);
/* cpu */
ret = synth_event_add_next_val(smp_processor_id(), &trace_state);
/* my_string_field */
ret = synth_event_add_next_val((u64)"thneed_2.01", &trace_state);
/* my_int_field */
ret = synth_event_add_next_val(395, &trace_state);
To assign the values in any order, synth_event_add_val() should be
used. Each call is passed the same synth_trace_state object used in
the synth_event_trace_start(), along with the field name of the field
to set and the value to set it to. The same sequence of calls as in
the above examples using this method would be (without error-handling
code):
ret = synth_event_add_val("next_pid_field", 777, &trace_state);
ret = synth_event_add_val("next_comm_field", (u64)"silly putty",
&trace_state);
ret = synth_event_add_val("ts_ns", 1000000, &trace_state);
ret = synth_event_add_val("ts_ms", 1000, &trace_state);
ret = synth_event_add_val("cpu", smp_processor_id(), &trace_state);
ret = synth_event_add_val("my_string_field", (u64)"thneed_9",
&trace_state);
ret = synth_event_add_val("my_int_field", 3999, &trace_state);
Note that synth_event_add_next_val() and synth_event_add_val() are
incompatible if used within the same trace of an event - either one
can be used but not both at the same time.
Finally, the event won't be actually traced until it's 'closed',
which is done using synth_event_trace_end(), which takes only the
struct synth_trace_state object used in the previous calls:
ret = synth_event_trace_end(&trace_state);
Note that synth_event_trace_end() must be called at the end regardless
of whether any of the add calls failed (say due to a bad field name
being passed in).
6.3.4 Dyamically creating kprobe and kretprobe event definitions
----------------------------------------------------------------
To create a kprobe or kretprobe trace event from kernel code, the
kprobe_event_gen_cmd_start() or kretprobe_event_gen_cmd_start()
functions can be used.
To create a kprobe event, an empty or partially empty kprobe event
should first be created using kprobe_event_gen_cmd_start(). The name
of the event and the probe location should be specfied along with one
or args each representing a probe field should be supplied to this
function. Before calling kprobe_event_gen_cmd_start(), the user
should create and initialize a dynevent_cmd object using
kprobe_event_cmd_init().
For example, to create a new "schedtest" kprobe event with two fields:
struct dynevent_cmd cmd;
char *buf;
/* Create a buffer to hold the generated command */
buf = kzalloc(MAX_DYNEVENT_CMD_LEN, GFP_KERNEL);
/* Before generating the command, initialize the cmd object */
kprobe_event_cmd_init(&cmd, buf, MAX_DYNEVENT_CMD_LEN);
/*
* Define the gen_kprobe_test event with the first 2 kprobe
* fields.
*/
ret = kprobe_event_gen_cmd_start(&cmd, "gen_kprobe_test", "do_sys_open",
"dfd=%ax", "filename=%dx");
Once the kprobe event object has been created, it can then be
populated with more fields. Fields can be added using
kprobe_event_add_fields(), supplying the dynevent_cmd object along
with a variable arg list of probe fields. For example, to add a
couple additional fields, the following call could be made:
ret = kprobe_event_add_fields(&cmd, "flags=%cx", "mode=+4($stack)");
Once all the fields have been added, the event should be finalized and
registered by calling the kprobe_event_gen_cmd_end() or
kretprobe_event_gen_cmd_end() functions, depending on whether a kprobe
or kretprobe command was started:
ret = kprobe_event_gen_cmd_end(&cmd);
or
ret = kretprobe_event_gen_cmd_end(&cmd);
At this point, the event object is ready to be used for tracing new
events.
Similarly, a kretprobe event can be created using
kretprobe_event_gen_cmd_start() with a probe name and location and
additional params such as $retval:
ret = kretprobe_event_gen_cmd_start(&cmd, "gen_kretprobe_test",
"do_sys_open", "$retval");
Similar to the synthetic event case, code like the following can be
used to enable the newly created kprobe event:
gen_kprobe_test = trace_get_event_file(NULL, "kprobes", "gen_kprobe_test");
ret = trace_array_set_clr_event(gen_kprobe_test->tr,
"kprobes", "gen_kprobe_test", true);
Finally, also similar to synthetic events, the following code can be
used to give the kprobe event file back and delete the event:
trace_put_event_file(gen_kprobe_test);
ret = kprobe_event_delete("gen_kprobe_test");
6.3.4 The "dynevent_cmd" low-level API
--------------------------------------
Both the in-kernel synthetic event and kprobe interfaces are built on
top of a lower-level "dynevent_cmd" interface. This interface is
meant to provide the basis for higher-level interfaces such as the
synthetic and kprobe interfaces, which can be used as examples.
The basic idea is simple and amounts to providing a general-purpose
layer that can be used to generate trace event commands. The
generated command strings can then be passed to the command-parsing
and event creation code that already exists in the trace event
subystem for creating the corresponding trace events.
In a nutshell, the way it works is that the higher-level interface
code creates a struct dynevent_cmd object, then uses a couple
functions, dynevent_arg_add() and dynevent_arg_pair_add() to build up
a command string, which finally causes the command to be executed
using the dynevent_create() function. The details of the interface
are described below.
The first step in building a new command string is to create and
initialize an instance of a dynevent_cmd. Here, for instance, we
create a dynevent_cmd on the stack and initialize it:
struct dynevent_cmd cmd;
char *buf;
int ret;
buf = kzalloc(MAX_DYNEVENT_CMD_LEN, GFP_KERNEL);
dynevent_cmd_init(cmd, buf, maxlen, DYNEVENT_TYPE_FOO,
foo_event_run_command);
The dynevent_cmd initialization needs to be given a user-specified
buffer and the length of the buffer (MAX_DYNEVENT_CMD_LEN can be used
for this purpose - at 2k it's generally too big to be comfortably put
on the stack, so is dynamically allocated), a dynevent type id, which
is meant to be used to check that further API calls are for the
correct command type, and a pointer to an event-specific run_command()
callback that will be called to actually execute the event-specific
command function.
Once that's done, the command string can by built up by successive
calls to argument-adding functions.
To add a single argument, define and initialize a struct dynevent_arg
or struct dynevent_arg_pair object. Here's an example of the simplest
possible arg addition, which is simply to append the given string as
a whitespace-separated argument to the command:
struct dynevent_arg arg;
dynevent_arg_init(&arg, NULL, 0);
arg.str = name;
ret = dynevent_arg_add(cmd, &arg);
The arg object is first initialized using dynevent_arg_init() and in
this case the parameters are NULL or 0, which means there's no
optional sanity-checking function or separator appended to the end of
the arg.
Here's another more complicated example using an 'arg pair', which is
used to create an argument that consists of a couple components added
together as a unit, for example, a 'type field_name;' arg or a simple
expression arg e.g. 'flags=%cx':
struct dynevent_arg_pair arg_pair;
dynevent_arg_pair_init(&arg_pair, dynevent_foo_check_arg_fn, 0, ';');
arg_pair.lhs = type;
arg_pair.rhs = name;
ret = dynevent_arg_pair_add(cmd, &arg_pair);
Again, the arg_pair is first initialized, in this case with a callback
function used to check the sanity of the args (for example, that
neither part of the pair is NULL), along with a character to be used
to add an operator between the pair (here none) and a separator to be
appended onto the end of the arg pair (here ';').
There's also a dynevent_str_add() function that can be used to simply
add a string as-is, with no spaces, delimeters, or arg check.
Any number of dynevent_*_add() calls can be made to build up the string
(until its length surpasses cmd->maxlen). When all the arguments have
been added and the command string is complete, the only thing left to
do is run the command, which happens by simply calling
dynevent_create():
ret = dynevent_create(&cmd);
At that point, if the return value is 0, the dynamic event has been
created and is ready to use.
See the dynevent_cmd function definitions themselves for the details
of the API.