korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-11-18 01:34:14 +08:00
Code Issues Packages Projects Releases Wiki Activity

docs: ABI: testing: make the files compatible with ReST output

Browse Source 
Some files over there won't parse well by Sphinx.

Fix them.

Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for IIO
Acked-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/58cf3c2d611e0197fb215652719ebd82ca2658db.1604042072.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Mauro Carvalho Chehab 2020-10-30 08:40:39 +01:00 committed by Greg Kroah-Hartman
parent 98913408c5
commit 3443333284
74 changed files with 1306 additions and 849 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

36
Documentation/ABI/testing/configfs-spear-pcie-gadget
View File

@ -10,22 +10,24 @@ Description:
This interfaces can be used to show spear's PCIe device capability.
Nodes are only visible when configfs is mounted. To mount configfs
in /config directory use:
# mount -t configfs none /config/
in /config directory use::
For nth PCIe Device Controller
/config/pcie-gadget.n/
link ... used to enable ltssm and read its status.
int_type ...used to configure and read type of supported
interrupt
no_of_msi ... used to configure number of MSI vector needed and
# mount -t configfs none /config/
For nth PCIe Device Controller /config/pcie-gadget.n/:
=============== ======================================================
link used to enable ltssm and read its status.
int_type used to configure and read type of supported interrupt
no_of_msi used to configure number of MSI vector needed and
to read no of MSI granted.
inta ... write 1 to assert INTA and 0 to de-assert.
send_msi ... write MSI vector to be sent.
vendor_id ... used to write and read vendor id (hex)
device_id ... used to write and read device id (hex)
bar0_size ... used to write and read bar0_size
bar0_address ... used to write and read bar0 mapped area in hex.
bar0_rw_offset ... used to write and read offset of bar0 where
bar0_data will be written or read.
bar0_data ... used to write and read data at bar0_rw_offset.
inta write 1 to assert INTA and 0 to de-assert.
send_msi write MSI vector to be sent.
vendor_id used to write and read vendor id (hex)
device_id used to write and read device id (hex)
bar0_size used to write and read bar0_size
bar0_address used to write and read bar0 mapped area in hex.
bar0_rw_offset used to write and read offset of bar0 where bar0_data
will be written or read.
bar0_data used to write and read data at bar0_rw_offset.
=============== ======================================================

83
Documentation/ABI/testing/configfs-usb-gadget
View File

@ -12,22 +12,24 @@ Description:
The attributes of a gadget:
UDC - bind a gadget to UDC/unbind a gadget;
write UDC's name found in /sys/class/udc/*
to bind a gadget, empty string "" to unbind.
================ ============================================
UDC bind a gadget to UDC/unbind a gadget;
write UDC's name found in /sys/class/udc/*
to bind a gadget, empty string "" to unbind.
max_speed - maximum speed the driver supports. Valid
names are super-speed-plus, super-speed,
high-speed, full-speed, and low-speed.
max_speed maximum speed the driver supports. Valid
names are super-speed-plus, super-speed,
high-speed, full-speed, and low-speed.
bDeviceClass - USB device class code
bDeviceSubClass - USB device subclass code
bDeviceProtocol - USB device protocol code
bMaxPacketSize0 - maximum endpoint 0 packet size
bcdDevice - bcd device release number
bcdUSB - bcd USB specification version number
idProduct - product ID
idVendor - vendor ID
bDeviceClass USB device class code
bDeviceSubClass USB device subclass code
bDeviceProtocol USB device protocol code
bMaxPacketSize0 maximum endpoint 0 packet size
bcdDevice bcd device release number
bcdUSB bcd USB specification version number
idProduct product ID
idVendor vendor ID
================ ============================================
What: /config/usb-gadget/gadget/configs
Date: Jun 2013
@ -41,8 +43,10 @@ KernelVersion: 3.11
Description:
The attributes of a configuration:
bmAttributes - configuration characteristics
MaxPower - maximum power consumption from the bus
================ ======================================
bmAttributes configuration characteristics
MaxPower maximum power consumption from the bus
================ ======================================
What: /config/usb-gadget/gadget/configs/config/strings
Date: Jun 2013
@ -57,7 +61,9 @@ KernelVersion: 3.11
Description:
The attributes:
configuration - configuration description
================ =========================
configuration configuration description
================ =========================
What: /config/usb-gadget/gadget/functions
@ -76,8 +82,10 @@ Description:
The attributes:
compatible_id - 8-byte string for "Compatible ID"
sub_compatible_id - 8-byte string for "Sub Compatible ID"
================= =====================================
compatible_id 8-byte string for "Compatible ID"
sub_compatible_id 8-byte string for "Sub Compatible ID"
================= =====================================
What: /config/usb-gadget/gadget/functions/<func>.<inst>/interface.<n>/<property>
Date: May 2014
@ -89,16 +97,19 @@ Description:
The attributes:
type - value 1..7 for interpreting the data
1: unicode string
2: unicode string with environment variable
3: binary
4: little-endian 32-bit
5: big-endian 32-bit
6: unicode string with a symbolic link
7: multiple unicode strings
data - blob of data to be interpreted depending on
===== ===============================================
type value 1..7 for interpreting the data
- 1: unicode string
- 2: unicode string with environment variable
- 3: binary
- 4: little-endian 32-bit
- 5: big-endian 32-bit
- 6: unicode string with a symbolic link
- 7: multiple unicode strings
data blob of data to be interpreted depending on
type
===== ===============================================
What: /config/usb-gadget/gadget/strings
Date: Jun 2013
@ -113,9 +124,11 @@ KernelVersion: 3.11
Description:
The attributes:
serialnumber - gadget's serial number (string)
product - gadget's product description
manufacturer - gadget's manufacturer description
============ =================================
serialnumber gadget's serial number (string)
product gadget's product description
manufacturer gadget's manufacturer description
============ =================================
What: /config/usb-gadget/gadget/os_desc
Date: May 2014
@ -123,8 +136,10 @@ KernelVersion: 3.16
Description:
This group contains "OS String" extension handling attributes.
use - flag turning "OS Desctiptors" support on/off
b_vendor_code - one-byte value used for custom per-device and
============= ===============================================
use flag turning "OS Desctiptors" support on/off
b_vendor_code one-byte value used for custom per-device and
per-interface requests
qw_sign - an identifier to be reported as "OS String"
qw_sign an identifier to be reported as "OS String"
proper
============= ===============================================

10
Documentation/ABI/testing/configfs-usb-gadget-hid
View File

@ -4,8 +4,10 @@ KernelVersion: 3.19
Description:
The attributes:
protocol - HID protocol to use
report_desc - blob corresponding to HID report descriptors
============= ============================================
protocol HID protocol to use
report_desc blob corresponding to HID report descriptors
except the data passed through /dev/hidg<N>
report_length - HID report length
subclass - HID device subclass to use
report_length HID report length
subclass HID device subclass to use
============= ============================================

16
Documentation/ABI/testing/configfs-usb-gadget-rndis
View File

@ -4,14 +4,16 @@ KernelVersion: 3.11
Description:
The attributes:
ifname - network device interface name associated with
========= =============================================
ifname network device interface name associated with
this function instance
qmult - queue length multiplier for high and
qmult queue length multiplier for high and
super speed
host_addr - MAC address of host's end of this
host_addr MAC address of host's end of this
Ethernet over USB link
dev_addr - MAC address of device's end of this
dev_addr MAC address of device's end of this
Ethernet over USB link
class - USB interface class, default is 02 (hex)
subclass - USB interface subclass, default is 06 (hex)
protocol - USB interface protocol, default is 00 (hex)
class USB interface class, default is 02 (hex)
subclass USB interface subclass, default is 06 (hex)
protocol USB interface protocol, default is 00 (hex)
========= =============================================

18
Documentation/ABI/testing/configfs-usb-gadget-uac1
View File

@ -4,11 +4,13 @@ KernelVersion: 4.14
Description:
The attributes:
c_chmask - capture channel mask
c_srate - capture sampling rate
c_ssize - capture sample size (bytes)
p_chmask - playback channel mask
p_srate - playback sampling rate
p_ssize - playback sample size (bytes)
req_number - the number of pre-allocated request
for both capture and playback
========== ===================================
c_chmask capture channel mask
c_srate capture sampling rate
c_ssize capture sample size (bytes)
p_chmask playback channel mask
p_srate playback sampling rate
p_ssize playback sample size (bytes)
req_number the number of pre-allocated request
for both capture and playback
========== ===================================

220
Documentation/ABI/testing/configfs-usb-gadget-uvc
View File

@ -3,9 +3,11 @@ Date: Dec 2014
KernelVersion: 4.0
Description: UVC function directory
streaming_maxburst - 0..15 (ss only)
streaming_maxpacket - 1..1023 (fs), 1..3072 (hs/ss)
streaming_interval - 1..16
=================== =============================
streaming_maxburst 0..15 (ss only)
streaming_maxpacket 1..1023 (fs), 1..3072 (hs/ss)
streaming_interval 1..16
=================== =============================
What: /config/usb-gadget/gadget/functions/uvc.name/control
Date: Dec 2014
@ -13,8 +15,11 @@ KernelVersion: 4.0
Description: Control descriptors
All attributes read only:
bInterfaceNumber - USB interface number for this
streaming interface
================ =============================
bInterfaceNumber USB interface number for this
streaming interface
================ =============================
What: /config/usb-gadget/gadget/functions/uvc.name/control/class
Date: Dec 2014
@ -47,13 +52,16 @@ KernelVersion: 4.0
Description: Default output terminal descriptors
All attributes read only:
iTerminal - index of string descriptor
bSourceID - id of the terminal to which this terminal
============== =============================================
iTerminal index of string descriptor
bSourceID id of the terminal to which this terminal
is connected
bAssocTerminal - id of the input terminal to which this output
bAssocTerminal id of the input terminal to which this output
terminal is associated
wTerminalType - terminal type
bTerminalID - a non-zero id of this terminal
wTerminalType terminal type
bTerminalID a non-zero id of this terminal
============== =============================================
What: /config/usb-gadget/gadget/functions/uvc.name/control/terminal/camera
Date: Dec 2014
@ -66,16 +74,19 @@ KernelVersion: 4.0
Description: Default camera terminal descriptors
All attributes read only:
bmControls - bitmap specifying which controls are
supported for the video stream
wOcularFocalLength - the value of Locular
wObjectiveFocalLengthMax- the value of Lmin
wObjectiveFocalLengthMin- the value of Lmax
iTerminal - index of string descriptor
bAssocTerminal - id of the output terminal to which
this terminal is connected
wTerminalType - terminal type
bTerminalID - a non-zero id of this terminal
======================== ====================================
bmControls bitmap specifying which controls are
supported for the video stream
wOcularFocalLength the value of Locular
wObjectiveFocalLengthMax the value of Lmin
wObjectiveFocalLengthMin the value of Lmax
iTerminal index of string descriptor
bAssocTerminal id of the output terminal to which
this terminal is connected
wTerminalType terminal type
bTerminalID a non-zero id of this terminal
======================== ====================================
What: /config/usb-gadget/gadget/functions/uvc.name/control/processing
Date: Dec 2014
@ -88,13 +99,16 @@ KernelVersion: 4.0
Description: Default processing unit descriptors
All attributes read only:
iProcessing - index of string descriptor
bmControls - bitmap specifying which controls are
=============== ========================================
iProcessing index of string descriptor
bmControls bitmap specifying which controls are
supported for the video stream
wMaxMultiplier - maximum digital magnification x100
bSourceID - id of the terminal to which this unit is
wMaxMultiplier maximum digital magnification x100
bSourceID id of the terminal to which this unit is
connected
bUnitID - a non-zero id of this unit
bUnitID a non-zero id of this unit
=============== ========================================
What: /config/usb-gadget/gadget/functions/uvc.name/control/header
Date: Dec 2014
@ -114,8 +128,11 @@ KernelVersion: 4.0
Description: Streaming descriptors
All attributes read only:
bInterfaceNumber - USB interface number for this
streaming interface
================ =============================
bInterfaceNumber USB interface number for this
streaming interface
================ =============================
What: /config/usb-gadget/gadget/functions/uvc.name/streaming/class
Date: Dec 2014
@ -148,13 +165,16 @@ KernelVersion: 4.0
Description: Default color matching descriptors
All attributes read only:
bMatrixCoefficients - matrix used to compute luma and
chroma values from the color primaries
bTransferCharacteristics- optoelectronic transfer
characteristic of the source picutre,
also called the gamma function
bColorPrimaries - color primaries and the reference
white
======================== ======================================
bMatrixCoefficients matrix used to compute luma and
chroma values from the color primaries
bTransferCharacteristics optoelectronic transfer
characteristic of the source picutre,
also called the gamma function
bColorPrimaries color primaries and the reference
white
======================== ======================================
What: /config/usb-gadget/gadget/functions/uvc.name/streaming/mjpeg
Date: Dec 2014
@ -168,47 +188,52 @@ Description: Specific MJPEG format descriptors
All attributes read only,
except bmaControls and bDefaultFrameIndex:
bFormatIndex - unique id for this format descriptor;
=================== =====================================
bFormatIndex unique id for this format descriptor;
only defined after parent header is
linked into the streaming class;
read-only
bmaControls - this format's data for bmaControls in
bmaControls this format's data for bmaControls in
the streaming header
bmInterfaceFlags - specifies interlace information,
bmInterfaceFlags specifies interlace information,
read-only
bAspectRatioY - the X dimension of the picture aspect
bAspectRatioY the X dimension of the picture aspect
ratio, read-only
bAspectRatioX - the Y dimension of the picture aspect
bAspectRatioX the Y dimension of the picture aspect
ratio, read-only
bmFlags - characteristics of this format,
bmFlags characteristics of this format,
read-only
bDefaultFrameIndex - optimum frame index for this stream
bDefaultFrameIndex optimum frame index for this stream
=================== =====================================
What: /config/usb-gadget/gadget/functions/uvc.name/streaming/mjpeg/name/name
Date: Dec 2014
KernelVersion: 4.0
Description: Specific MJPEG frame descriptors
bFrameIndex - unique id for this framedescriptor;
only defined after parent format is
linked into the streaming header;
read-only
dwFrameInterval - indicates how frame interval can be
programmed; a number of values
separated by newline can be specified
dwDefaultFrameInterval - the frame interval the device would
like to use as default
dwMaxVideoFrameBufferSize- the maximum number of bytes the
compressor will produce for a video
frame or still image
dwMaxBitRate - the maximum bit rate at the shortest
frame interval in bps
dwMinBitRate - the minimum bit rate at the longest
frame interval in bps
wHeight - height of decoded bitmap frame in px
wWidth - width of decoded bitmam frame in px
bmCapabilities - still image support, fixed frame-rate
support
========================= =====================================
bFrameIndex unique id for this framedescriptor;
only defined after parent format is
linked into the streaming header;
read-only
dwFrameInterval indicates how frame interval can be
programmed; a number of values
separated by newline can be specified
dwDefaultFrameInterval the frame interval the device would
like to use as default
dwMaxVideoFrameBufferSize the maximum number of bytes the
compressor will produce for a video
frame or still image
dwMaxBitRate the maximum bit rate at the shortest
frame interval in bps
dwMinBitRate the minimum bit rate at the longest
frame interval in bps
wHeight height of decoded bitmap frame in px
wWidth width of decoded bitmam frame in px
bmCapabilities still image support, fixed frame-rate
support
========================= =====================================
What: /config/usb-gadget/gadget/functions/uvc.name/streaming/uncompressed
Date: Dec 2014
@ -220,50 +245,54 @@ Date: Dec 2014
KernelVersion: 4.0
Description: Specific uncompressed format descriptors
bFormatIndex - unique id for this format descriptor;
================== =======================================
bFormatIndex unique id for this format descriptor;
only defined after parent header is
linked into the streaming class;
read-only
bmaControls - this format's data for bmaControls in
bmaControls this format's data for bmaControls in
the streaming header
bmInterfaceFlags - specifies interlace information,
bmInterfaceFlags specifies interlace information,
read-only
bAspectRatioY - the X dimension of the picture aspect
bAspectRatioY the X dimension of the picture aspect
ratio, read-only
bAspectRatioX - the Y dimension of the picture aspect
bAspectRatioX the Y dimension of the picture aspect
ratio, read-only
bDefaultFrameIndex - optimum frame index for this stream
bBitsPerPixel - number of bits per pixel used to
bDefaultFrameIndex optimum frame index for this stream
bBitsPerPixel number of bits per pixel used to
specify color in the decoded video
frame
guidFormat - globally unique id used to identify
guidFormat globally unique id used to identify
stream-encoding format
================== =======================================
What: /config/usb-gadget/gadget/functions/uvc.name/streaming/uncompressed/name/name
Date: Dec 2014
KernelVersion: 4.0
Description: Specific uncompressed frame descriptors
bFrameIndex - unique id for this framedescriptor;
only defined after parent format is
linked into the streaming header;
read-only
dwFrameInterval - indicates how frame interval can be
programmed; a number of values
separated by newline can be specified
dwDefaultFrameInterval - the frame interval the device would
like to use as default
dwMaxVideoFrameBufferSize- the maximum number of bytes the
compressor will produce for a video
frame or still image
dwMaxBitRate - the maximum bit rate at the shortest
frame interval in bps
dwMinBitRate - the minimum bit rate at the longest
frame interval in bps
wHeight - height of decoded bitmap frame in px
wWidth - width of decoded bitmam frame in px
bmCapabilities - still image support, fixed frame-rate
support
========================= =====================================
bFrameIndex unique id for this framedescriptor;
only defined after parent format is
linked into the streaming header;
read-only
dwFrameInterval indicates how frame interval can be
programmed; a number of values
separated by newline can be specified
dwDefaultFrameInterval the frame interval the device would
like to use as default
dwMaxVideoFrameBufferSize the maximum number of bytes the
compressor will produce for a video
frame or still image
dwMaxBitRate the maximum bit rate at the shortest
frame interval in bps
dwMinBitRate the minimum bit rate at the longest
frame interval in bps
wHeight height of decoded bitmap frame in px
wWidth width of decoded bitmam frame in px
bmCapabilities still image support, fixed frame-rate
support
========================= =====================================
What: /config/usb-gadget/gadget/functions/uvc.name/streaming/header
Date: Dec 2014
@ -276,17 +305,20 @@ KernelVersion: 4.0
Description: Specific streaming header descriptors
All attributes read only:
bTriggerUsage - how the host software will respond to
==================== =====================================
bTriggerUsage how the host software will respond to
a hardware trigger interrupt event
bTriggerSupport - flag specifying if hardware
bTriggerSupport flag specifying if hardware
triggering is supported
bStillCaptureMethod - method of still image caputre
bStillCaptureMethod method of still image caputre
supported
bTerminalLink - id of the output terminal to which
bTerminalLink id of the output terminal to which
the video endpoint of this interface
is connected
bmInfo - capabilities of this video streaming
bmInfo capabilities of this video streaming
interface
==================== =====================================
What: /sys/class/udc/udc.name/device/gadget/video4linux/video.name/function_name
Date: May 2018

11
Documentation/ABI/testing/debugfs-ec
View File

@ -6,7 +6,7 @@ Description:
General information like which GPE is assigned to the EC and whether
the global lock should get used.
Knowing the EC GPE one can watch the amount of HW events related to
the EC here (XY -> GPE number from /sys/kernel/debug/ec/*/gpe):
the EC here (XY -> GPE number from `/sys/kernel/debug/ec/*/gpe`):
/sys/firmware/acpi/interrupts/gpeXY
The io file is binary and a userspace tool located here:
@ -14,7 +14,8 @@ ftp://ftp.suse.com/pub/people/trenn/sources/ec/
should get used to read out the 256 Embedded Controller registers
or writing to them.
CAUTION: Do not write to the Embedded Controller if you don't know
what you are doing! Rebooting afterwards also is a good idea.
This can influence the way your machine is cooled and fans may
not get switched on again after you did a wrong write.
CAUTION:
Do not write to the Embedded Controller if you don't know
what you are doing! Rebooting afterwards also is a good idea.
This can influence the way your machine is cooled and fans may
not get switched on again after you did a wrong write.

11
Documentation/ABI/testing/debugfs-pktcdvd
View File

@ -4,16 +4,15 @@ KernelVersion: 2.6.20
Contact: Thomas Maier <balagi@justmail.de>
Description:
debugfs interface
-----------------
The pktcdvd module (packet writing driver) creates
these files in debugfs:
/sys/kernel/debug/pktcdvd/pktcdvd[0-7]/
==== ====== ====================================
info (0444) Lots of driver statistics and infos.
==== ====== ====================================
Example:
-------
Example::
cat /sys/kernel/debug/pktcdvd/pktcdvd0/info
cat /sys/kernel/debug/pktcdvd/pktcdvd0/info

27
Documentation/ABI/testing/dev-kmsg
View File

@ -6,6 +6,7 @@ Description: The /dev/kmsg character device node provides userspace access
to the kernel's printk buffer.
Injecting messages:
Every write() to the opened device node places a log entry in
the kernel's printk buffer.
@ -21,6 +22,7 @@ Description: The /dev/kmsg character device node provides userspace access
the messages can always be reliably determined.
Accessing the buffer:
Every read() from the opened device node receives one record
of the kernel's printk buffer.
@ -48,6 +50,7 @@ Description: The /dev/kmsg character device node provides userspace access
if needed, without limiting the interface to a single reader.
The device supports seek with the following parameters:
SEEK_SET, 0
seek to the first entry in the buffer
SEEK_END, 0
@ -87,18 +90,22 @@ Description: The /dev/kmsg character device node provides userspace access
readable context of the message, for reliable processing in
userspace.
Example:
7,160,424069,-;pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
SUBSYSTEM=acpi
DEVICE=+acpi:PNP0A03:00
6,339,5140900,-;NET: Registered protocol family 10
30,340,5690716,-;udevd[80]: starting version 181
Example::
7,160,424069,-;pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
SUBSYSTEM=acpi
DEVICE=+acpi:PNP0A03:00
6,339,5140900,-;NET: Registered protocol family 10
30,340,5690716,-;udevd[80]: starting version 181
The DEVICE= key uniquely identifies devices the following way:
b12:8 - block dev_t
c127:3 - char dev_t
n8 - netdev ifindex
+sound:card0 - subsystem:devname
============ =================
b12:8 block dev_t
c127:3 char dev_t
n8 netdev ifindex
+sound:card0 subsystem:devname
============ =================
The flags field carries '-' by default. A 'c' indicates a
fragment of a line. Note, that these hints about continuation

17
Documentation/ABI/testing/evm
View File

@ -17,26 +17,33 @@ Description:
echoing a value to <securityfs>/evm made up of the
following bits:
=== ==================================================
Bit Effect
=== ==================================================
0 Enable HMAC validation and creation
1 Enable digital signature validation
2 Permit modification of EVM-protected metadata at
runtime. Not supported if HMAC validation and
creation is enabled.
31 Disable further runtime modification of EVM policy
=== ==================================================
For example:
For example::
echo 1 ><securityfs>/evm
echo 1 ><securityfs>/evm
will enable HMAC validation and creation
echo 0x80000003 ><securityfs>/evm
::
echo 0x80000003 ><securityfs>/evm
will enable HMAC and digital signature validation and
HMAC creation and disable all further modification of policy.
echo 0x80000006 ><securityfs>/evm
::
echo 0x80000006 ><securityfs>/evm
will enable digital signature validation, permit
modification of EVM-protected metadata and
@ -65,7 +72,7 @@ Description:
Shows the set of extended attributes used to calculate or
validate the EVM signature, and allows additional attributes
to be added at runtime. Any signatures generated after
additional attributes are added (and on files posessing those
additional attributes are added (and on files possessing those
additional attributes) will only be valid if the same
additional attributes are configured on system boot. Writing
a single period (.) will lock the xattr list from any further

30
Documentation/ABI/testing/ima_policy
View File

@ -15,19 +15,22 @@ Description:
IMA appraisal, if configured, uses these file measurements
for local measurement appraisal.
rule format: action [condition ...]
::
action: measure | dont_measure | appraise | dont_appraise |
audit | hash | dont_hash
condition:= base | lsm [option]
rule format: action [condition ...]
action: measure | dont_measure | appraise | dont_appraise |
audit | hash | dont_hash
condition:= base | lsm [option]
base: [[func=] [mask=] [fsmagic=] [fsuuid=] [uid=]
[euid=] [fowner=] [fsname=]]
lsm: [[subj_user=] [subj_role=] [subj_type=]
[obj_user=] [obj_role=] [obj_type=]]
option: [[appraise_type=]] [template=] [permit_directio]
[appraise_flag=] [keyrings=]
base: func:= [BPRM_CHECK][MMAP_CHECK][CREDS_CHECK][FILE_CHECK][MODULE_CHECK]
[FIRMWARE_CHECK]
base:
func:= [BPRM_CHECK][MMAP_CHECK][CREDS_CHECK][FILE_CHECK]MODULE_CHECK]
[FIRMWARE_CHECK]
[KEXEC_KERNEL_CHECK] [KEXEC_INITRAMFS_CHECK]
[KEXEC_CMDLINE] [KEY_CHECK]
mask:= [[^]MAY_READ] [[^]MAY_WRITE] [[^]MAY_APPEND]
@ -37,8 +40,9 @@ Description:
uid:= decimal value
euid:= decimal value
fowner:= decimal value
lsm: are LSM specific
option: appraise_type:= [imasig] [imasig|modsig]
lsm: are LSM specific
option:
appraise_type:= [imasig] [imasig|modsig]
appraise_flag:= [check_blacklist]
Currently, blacklist check is only for files signed with appended
signature.
@ -49,7 +53,7 @@ Description:
(eg, ima-ng). Only valid when action is "measure".
pcr:= decimal value
default policy:
default policy:
# PROC_SUPER_MAGIC
dont_measure fsmagic=0x9fa0
dont_appraise fsmagic=0x9fa0
@ -97,7 +101,8 @@ Description:
Examples of LSM specific definitions:
SELinux:
SELinux::
dont_measure obj_type=var_log_t
dont_appraise obj_type=var_log_t
dont_measure obj_type=auditd_log_t
@ -105,10 +110,11 @@ Description:
measure subj_user=system_u func=FILE_CHECK mask=MAY_READ
measure subj_role=system_r func=FILE_CHECK mask=MAY_READ
Smack:
Smack::
measure subj_user=_ func=FILE_CHECK mask=MAY_READ
Example of measure rules using alternate PCRs:
Example of measure rules using alternate PCRs::
measure func=KEXEC_KERNEL_CHECK pcr=4
measure func=KEXEC_INITRAMFS_CHECK pcr=5

40
Documentation/ABI/testing/procfs-diskstats
View File

@ -6,28 +6,32 @@ Description:
of block devices. Each line contains the following 14
fields:
1 - major number
2 - minor mumber
3 - device name
4 - reads completed successfully
5 - reads merged
6 - sectors read
7 - time spent reading (ms)
8 - writes completed
9 - writes merged
10 - sectors written
11 - time spent writing (ms)
12 - I/Os currently in progress
13 - time spent doing I/Os (ms)
14 - weighted time spent doing I/Os (ms)
== ===================================
1 major number
2 minor mumber
3 device name
4 reads completed successfully
5 reads merged
6 sectors read
7 time spent reading (ms)
8 writes completed
9 writes merged
10 sectors written
11 time spent writing (ms)
12 I/Os currently in progress
13 time spent doing I/Os (ms)
14 weighted time spent doing I/Os (ms)
== ===================================
Kernel 4.18+ appends four more fields for discard
tracking putting the total at 18:
15 - discards completed successfully
16 - discards merged
17 - sectors discarded
18 - time spent discarding
== ===================================
15 discards completed successfully
16 discards merged
17 sectors discarded
18 time spent discarding
== ===================================
Kernel 5.5+ appends two more fields for flush requests:

38
Documentation/ABI/testing/sysfs-block
View File

@ -4,23 +4,27 @@ Contact: Jerome Marchand <jmarchan@redhat.com>
Description:
The /sys/block/<disk>/stat files displays the I/O
statistics of disk <disk>. They contain 11 fields:
1 - reads completed successfully
2 - reads merged
3 - sectors read
4 - time spent reading (ms)
5 - writes completed
6 - writes merged
7 - sectors written
8 - time spent writing (ms)
9 - I/Os currently in progress
10 - time spent doing I/Os (ms)
11 - weighted time spent doing I/Os (ms)
12 - discards completed
13 - discards merged
14 - sectors discarded
15 - time spent discarding (ms)
16 - flush requests completed
17 - time spent flushing (ms)
== ==============================================
1 reads completed successfully
2 reads merged
3 sectors read
4 time spent reading (ms)
5 writes completed
6 writes merged
7 sectors written
8 time spent writing (ms)
9 I/Os currently in progress
10 time spent doing I/Os (ms)
11 weighted time spent doing I/Os (ms)
12 discards completed
13 discards merged
14 sectors discarded
15 time spent discarding (ms)
16 flush requests completed
17 time spent flushing (ms)
== ==============================================
For more details refer Documentation/admin-guide/iostats.rst

2
Documentation/ABI/testing/sysfs-block-device
View File

@ -8,11 +8,13 @@ Description:
It has the following valid values:
== ========================================================
0 OFF - the LED is not activated on activity
1 BLINK_ON - the LED blinks on every 10ms when activity is
detected.
2 BLINK_OFF - the LED is on when idle, and blinks off
every 10ms when activity is detected.
== ========================================================
Note that the user must turn sw_activity OFF it they wish to
control the activity LED via the em_message file.

18
Documentation/ABI/testing/sysfs-bus-acpi
View File

@ -67,14 +67,16 @@ Description:
The return value is a decimal integer representing the device's
status bitmap:
Bit [0] – Set if the device is present.
Bit [1] – Set if the device is enabled and decoding its
resources.
Bit [2] – Set if the device should be shown in the UI.
Bit [3] – Set if the device is functioning properly (cleared if
device failed its diagnostics).
Bit [4] – Set if the battery is present.
Bits [31:5] – Reserved (must be cleared)
=========== ==================================================
Bit [0] Set if the device is present.
Bit [1] Set if the device is enabled and decoding its
resources.
Bit [2] Set if the device should be shown in the UI.
Bit [3] Set if the device is functioning properly (cleared
if device failed its diagnostics).
Bit [4] Set if the battery is present.
Bits [31:5] Reserved (must be cleared)
=========== ==================================================
If bit [0] is clear, then bit 1 must also be clear (a device
that is not present cannot be enabled).

3
Documentation/ABI/testing/sysfs-bus-event_source-devices-format
View File

@ -10,7 +10,8 @@ Description:
name/value pairs.
Userspace must be prepared for the possibility that attributes
define overlapping bit ranges. For example:
define overlapping bit ranges. For example::
attr1 = 'config:0-23'
attr2 = 'config:0-7'
attr3 = 'config:12-35'

27
Documentation/ABI/testing/sysfs-bus-i2c-devices-pca954x
View File

@ -6,15 +6,18 @@ Description:
Value that exists only for mux devices that can be
written to control the behaviour of the multiplexer on
idle. Possible values:
-2 - disconnect on idle, i.e. deselect the last used
channel, which is useful when there is a device
with an address that conflicts with another
device on another mux on the same parent bus.
-1 - leave the mux as-is, which is the most optimal
setting in terms of I2C operations and is the
default mode.
0..<nchans> - set the mux to a predetermined channel,
which is useful if there is one channel that is
used almost always, and you want to reduce the
latency for normal operations after rare
transactions on other channels
=========== ===============================================
-2 disconnect on idle, i.e. deselect the last used
channel, which is useful when there is a device
with an address that conflicts with another
device on another mux on the same parent bus.
-1 leave the mux as-is, which is the most optimal
setting in terms of I2C operations and is the
default mode.
0..<nchans> set the mux to a predetermined channel,
which is useful if there is one channel that is
used almost always, and you want to reduce the
latency for normal operations after rare
transactions on other channels
=========== ===============================================

11
Documentation/ABI/testing/sysfs-bus-iio
View File

@ -65,6 +65,7 @@ Contact: linux-iio@vger.kernel.org
Description:
When the internal sampling clock can only take a specific set of
frequencies, we can specify the available values with:
- a small discrete set of values like "0 2 4 6 8"
- a range with minimum, step and maximum frequencies like
"[min step max]"
@ -1627,17 +1628,21 @@ Description:
Mounting matrix for IIO sensors. This is a rotation matrix which
informs userspace about sensor chip's placement relative to the
main hardware it is mounted on.
Main hardware placement is defined according to the local
reference frame related to the physical quantity the sensor
measures.
Given that the rotation matrix is defined in a board specific
way (platform data and / or device-tree), the main hardware
reference frame definition is left to the implementor's choice
(see below for a magnetometer example).
Applications should apply this rotation matrix to samples so
that when main hardware reference frame is aligned onto local
reference frame, then sensor chip reference frame is also
perfectly aligned with it.
Matrix is a 3x3 unitary matrix and typically looks like
[0, 1, 0; 1, 0, 0; 0, 0, -1]. Identity matrix
[1, 0, 0; 0, 1, 0; 0, 0, 1] means sensor chip and main hardware
@ -1646,8 +1651,10 @@ Description:
For example, a mounting matrix for a magnetometer sensor informs
userspace about sensor chip's ORIENTATION relative to the main
hardware.
More specifically, main hardware orientation is defined with
respect to the LOCAL EARTH GEOMAGNETIC REFERENCE FRAME where :
* Y is in the ground plane and positive towards magnetic North ;
* X is in the ground plane, perpendicular to the North axis and
positive towards the East ;
@ -1656,13 +1663,16 @@ Description:
An implementor might consider that for a hand-held device, a
'natural' orientation would be 'front facing camera at the top'.
The main hardware reference frame could then be described as :
* Y is in the plane of the screen and is positive towards the
top of the screen ;
* X is in the plane of the screen, perpendicular to Y axis, and
positive towards the right hand side of the screen ;
* Z is perpendicular to the screen plane and positive out of the
screen.
Another example for a quadrotor UAV might be :
* Y is in the plane of the propellers and positive towards the
front-view camera;
* X is in the plane of the propellers, perpendicular to Y axis,
@ -1704,6 +1714,7 @@ Description:
This interface is deprecated; please use the Counter subsystem.
A list of possible counting directions which are:
- "up" : counter device is increasing.
- "down": counter device is decreasing.

5
Documentation/ABI/testing/sysfs-bus-iio-adc-envelope-detector
View File

@ -5,7 +5,8 @@ Contact: Peter Rosin <peda@axentia.se>
Description:
The DAC is used to find the peak level of an alternating
voltage input signal by a binary search using the output
of a comparator wired to an interrupt pin. Like so:
of a comparator wired to an interrupt pin. Like so::
_
| \
input +------>-------|+ \
@ -19,10 +20,12 @@ Description:
| irq|------<-------'
| |
'-------'
The boolean invert attribute (0/1) should be set when the
input signal is centered around the maximum value of the
dac instead of zero. The envelope detector will search
from below in this case and will also invert the result.
The edge/level of the interrupt is also switched to its
opposite value.

2
Documentation/ABI/testing/sysfs-bus-iio-cros-ec
View File

@ -4,7 +4,7 @@ KernelVersion: 4.7
Contact: linux-iio@vger.kernel.org
Description:
Writing '1' will perform a FOC (Fast Online Calibration). The
corresponding calibration offsets can be read from *_calibbias
corresponding calibration offsets can be read from `*_calibbias`
entries.
What: /sys/bus/iio/devices/iio:deviceX/location

8
Documentation/ABI/testing/sysfs-bus-iio-dfsdm-adc-stm32
View File

@ -3,14 +3,20 @@ KernelVersion: 4.14
Contact: arnaud.pouliquen@st.com
Description:
For audio purpose only.
Used by audio driver to set/get the spi input frequency.
This is mandatory if DFSDM is slave on SPI bus, to
provide information on the SPI clock frequency during runtime
Notice that the SPI frequency should be a multiple of sample
frequency to ensure the precision.
if DFSDM input is SPI master
if DFSDM input is SPI master:
Reading SPI clkout frequency,
error on writing
If DFSDM input is SPI Slave:
Reading returns value previously set.
Writing value before starting conversions.

29
Documentation/ABI/testing/sysfs-bus-iio-lptimer-stm32
View File

@ -17,9 +17,11 @@ KernelVersion: 4.13
Contact: fabrice.gasnier@st.com
Description:
Configure the device counter quadrature modes:
- non-quadrature:
Encoder IN1 input servers as the count input (up
direction).
- quadrature:
Encoder IN1 and IN2 inputs are mixed to get direction
and count.
@ -35,23 +37,26 @@ KernelVersion: 4.13
Contact: fabrice.gasnier@st.com
Description:
Configure the device encoder/counter active edge:
- rising-edge
- falling-edge
- both-edges
In non-quadrature mode, device counts up on active edge.
In quadrature mode, encoder counting scenarios are as follows:
----------------------------------------------------------------
+---------+----------+--------------------+--------------------+
| Active | Level on | IN1 signal | IN2 signal |
| edge | opposite |------------------------------------------
| edge | opposite +----------+---------+----------+---------+
| | signal | Rising | Falling | Rising | Falling |
----------------------------------------------------------------
| Rising | High -> | Down | - | Up | - |
| edge | Low -> | Up | - | Down | - |
----------------------------------------------------------------
| Falling | High -> | - | Up | - | Down |
| edge | Low -> | - | Down | - | Up |
----------------------------------------------------------------
| Both | High -> | Down | Up | Up | Down |
| edges | Low -> | Up | Down | Down | Up |
----------------------------------------------------------------
+---------+----------+----------+---------+----------+---------+
| Rising | High -> | Down | - | Up | - |
| edge | Low -> | Up | - | Down | - |
+---------+----------+----------+---------+----------+---------+
| Falling | High -> | - | Up | - | Down |
| edge | Low -> | - | Down | - | Up |
+---------+----------+----------+---------+----------+---------+
| Both | High -> | Down | Up | Up | Down |
| edges | Low -> | Up | Down | Down | Up |
+---------+----------+----------+---------+----------+---------+

19
Documentation/ABI/testing/sysfs-bus-iio-magnetometer-hmc5843
View File

@ -5,11 +5,16 @@ Contact: linux-iio@vger.kernel.org
Description:
Current configuration and available configurations
for the bias current.
normal - Normal measurement configurations (default)
positivebias - Positive bias configuration
negativebias - Negative bias configuration
disabled - Only available on HMC5983. Disables magnetic
============ ============================================
normal Normal measurement configurations (default)
positivebias Positive bias configuration
negativebias Negative bias configuration
disabled Only available on HMC5983. Disables magnetic
sensor and enables temperature sensor.
Note: The effect of this configuration may vary
according to the device. For exact documentation
check the device's datasheet.
============ ============================================
Note:
The effect of this configuration may vary
according to the device. For exact documentation
check the device's datasheet.

19
Documentation/ABI/testing/sysfs-bus-iio-temperature-max31856
View File

@ -5,9 +5,12 @@ Description:
Open-circuit fault. The detection of open-circuit faults,
such as those caused by broken thermocouple wires.
Reading returns either '1' or '0'.
'1' = An open circuit such as broken thermocouple wires
has been detected.
'0' = No open circuit or broken thermocouple wires are detected
=== =======================================================
'1' An open circuit such as broken thermocouple wires
has been detected.
'0' No open circuit or broken thermocouple wires are detected
=== =======================================================
What: /sys/bus/iio/devices/iio:deviceX/fault_ovuv
KernelVersion: 5.1
@ -18,7 +21,11 @@ Description:
cables by integrated MOSFETs at the T+ and T- inputs, and the
BIAS output. These MOSFETs turn off when the input voltage is
negative or greater than VDD.
Reading returns either '1' or '0'.
'1' = The input voltage is negative or greater than VDD.
'0' = The input voltage is positive and less than VDD (normal
state).
=== =======================================================
'1' The input voltage is negative or greater than VDD.
'0' The input voltage is positive and less than VDD (normal
state).
=== =======================================================

137
Documentation/ABI/testing/sysfs-bus-iio-timer-stm32
View File

@ -3,67 +3,85 @@ KernelVersion: 4.11
Contact: benjamin.gaignard@st.com
Description:
Reading returns the list possible master modes which are:
- "reset" : The UG bit from the TIMx_EGR register is
- "reset"
The UG bit from the TIMx_EGR register is
used as trigger output (TRGO).
- "enable" : The Counter Enable signal CNT_EN is used
- "enable"
The Counter Enable signal CNT_EN is used
as trigger output.
- "update" : The update event is selected as trigger output.
- "update"
The update event is selected as trigger output.
For instance a master timer can then be used
as a prescaler for a slave timer.
- "compare_pulse" : The trigger output send a positive pulse
when the CC1IF flag is to be set.
- "OC1REF" : OC1REF signal is used as trigger output.
- "OC2REF" : OC2REF signal is used as trigger output.
- "OC3REF" : OC3REF signal is used as trigger output.
- "OC4REF" : OC4REF signal is used as trigger output.
- "compare_pulse"
The trigger output send a positive pulse
when the CC1IF flag is to be set.
- "OC1REF"
OC1REF signal is used as trigger output.
- "OC2REF"
OC2REF signal is used as trigger output.
- "OC3REF"
OC3REF signal is used as trigger output.
- "OC4REF"
OC4REF signal is used as trigger output.
Additional modes (on TRGO2 only):
- "OC5REF" : OC5REF signal is used as trigger output.
- "OC6REF" : OC6REF signal is used as trigger output.
- "OC5REF"
OC5REF signal is used as trigger output.
- "OC6REF"
OC6REF signal is used as trigger output.
- "compare_pulse_OC4REF":
OC4REF rising or falling edges generate pulses.
OC4REF rising or falling edges generate pulses.
- "compare_pulse_OC6REF":
OC6REF rising or falling edges generate pulses.
OC6REF rising or falling edges generate pulses.
- "compare_pulse_OC4REF_r_or_OC6REF_r":
OC4REF or OC6REF rising edges generate pulses.
OC4REF or OC6REF rising edges generate pulses.
- "compare_pulse_OC4REF_r_or_OC6REF_f":
OC4REF rising or OC6REF falling edges generate pulses.
OC4REF rising or OC6REF falling edges generate
pulses.
- "compare_pulse_OC5REF_r_or_OC6REF_r":
OC5REF or OC6REF rising edges generate pulses.
OC5REF or OC6REF rising edges generate pulses.
- "compare_pulse_OC5REF_r_or_OC6REF_f":
OC5REF rising or OC6REF falling edges generate pulses.
OC5REF rising or OC6REF falling edges generate
pulses.
+-----------+ +-------------+ +---------+
| Prescaler +-> | Counter | +-> | Master | TRGO(2)
+-----------+ +--+--------+-+ |-> | Control +-->
| | || +---------+
+--v--------+-+ OCxREF || +---------+
| Chx compare +----------> | Output | ChX
+-----------+-+ | | Control +-->
. | | +---------+
. | | .
+-----------v-+ OC6REF | .
| Ch6 compare +---------+>
+-------------+
::
Example with: "compare_pulse_OC4REF_r_or_OC6REF_r":
+-----------+ +-------------+ +---------+
| Prescaler +-> | Counter | +-> | Master | TRGO(2)
+-----------+ +--+--------+-+ |-> | Control +-->
| | || +---------+
+--v--------+-+ OCxREF || +---------+
| Chx compare +----------> | Output | ChX
+-----------+-+ | | Control +-->
. | | +---------+
. | | .
+-----------v-+ OC6REF | .
| Ch6 compare +---------+>
+-------------+
X
X X
X . . X
X . . X
X . . X
count X . . . . X
. . . .
. . . .
+---------------+
OC4REF | . . |
+-+ . . +-+
. +---+ .
OC6REF . | | .
+-------+ +-------+
+-+ +-+
TRGO2 | | | |
+-+ +---+ +---------+
Example with: "compare_pulse_OC4REF_r_or_OC6REF_r"::
X
X X
X . . X
X . . X
X . . X
count X . . . . X
. . . .
. . . .
+---------------+
OC4REF | . . |
+-+ . . +-+
. +---+ .
OC6REF . | | .
+-------+ +-------+
+-+ +-+
TRGO2 | | | |
+-+ +---+ +---------+
What: /sys/bus/iio/devices/triggerX/master_mode
KernelVersion: 4.11
@ -91,6 +109,30 @@ Description:
When counting down the counter start from preset value
and fire event when reach 0.
What: /sys/bus/iio/devices/iio:deviceX/in_count_quadrature_mode_available
KernelVersion: 4.12
Contact: benjamin.gaignard@st.com
Description:
Reading returns the list possible quadrature modes.
What: /sys/bus/iio/devices/iio:deviceX/in_count0_quadrature_mode
KernelVersion: 4.12
Contact: benjamin.gaignard@st.com
Description:
Configure the device counter quadrature modes:
channel_A:
Encoder A input servers as the count input and B as
the UP/DOWN direction control input.
channel_B:
Encoder B input serves as the count input and A as
the UP/DOWN direction control input.
quadrature:
Encoder A and B inputs are mixed to get direction
and count with a scale of 0.25.
What: /sys/bus/iio/devices/iio:deviceX/in_count_enable_mode_available
KernelVersion: 4.12
Contact: benjamin.gaignard@st.com
@ -104,6 +146,7 @@ Description:
Configure the device counter enable modes, in all case
counting direction is set by in_count0_count_direction
attribute and the counter is clocked by the internal clock.
always:
Counter is always ON.

4
Documentation/ABI/testing/sysfs-bus-intel_th-devices-msc
View File

@ -9,11 +9,13 @@ Date: June 2015
KernelVersion: 4.3
Contact: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Description: (RW) Configure MSC operating mode:
- "single", for contiguous buffer mode (high-order alloc);
- "multi", for multiblock mode;
- "ExI", for DCI handler mode;
- "debug", for debug mode;
- any of the currently loaded buffer sinks.
If operating mode changes, existing buffer is deallocated,
provided there are no active users and tracing is not enabled,
otherwise the write will fail.
@ -23,10 +25,12 @@ Date: June 2015
KernelVersion: 4.3
Contact: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Description: (RW) Configure MSC buffer size for "single" or "multi" modes.
In single mode, this is a single number of pages, has to be
power of 2. In multiblock mode, this is a comma-separated list
of numbers of pages for each window to be allocated. Number of
windows is not limited.
Writing to this file deallocates existing buffer (provided
there are no active users and tracing is not enabled) and then
allocates a new one.

2
Documentation/ABI/testing/sysfs-bus-nfit
View File

@ -1,4 +1,4 @@
For all of the nmem device attributes under nfit/*, see the 'NVDIMM Firmware
For all of the nmem device attributes under ``nfit/*``, see the 'NVDIMM Firmware
Interface Table (NFIT)' section in the ACPI specification
(http://www.uefi.org/specifications) for more details.

119
Documentation/ABI/testing/sysfs-bus-pci-devices-aer_stats
View File

@ -1,6 +1,6 @@
==========================
PCIe Device AER statistics
==========================
--------------------------
These attributes show up under all the devices that are AER capable. These
statistical counters indicate the errors "as seen/reported by the device".
Note that this may mean that if an endpoint is causing problems, the AER
@ -17,19 +17,18 @@ Description: List of correctable errors seen and reported by this
PCI device using ERR_COR. Note that since multiple errors may
be reported using a single ERR_COR message, thus
TOTAL_ERR_COR at the end of the file may not match the actual
total of all the errors in the file. Sample output:
-------------------------------------------------------------------------
localhost /sys/devices/pci0000:00/0000:00:1c.0 # cat aer_dev_correctable
Receiver Error 2
Bad TLP 0
Bad DLLP 0
RELAY_NUM Rollover 0
Replay Timer Timeout 0
Advisory Non-Fatal 0
Corrected Internal Error 0
Header Log Overflow 0
TOTAL_ERR_COR 2
-------------------------------------------------------------------------
total of all the errors in the file. Sample output::
localhost /sys/devices/pci0000:00/0000:00:1c.0 # cat aer_dev_correctable
Receiver Error 2
Bad TLP 0
Bad DLLP 0
RELAY_NUM Rollover 0
Replay Timer Timeout 0
Advisory Non-Fatal 0
Corrected Internal Error 0
Header Log Overflow 0
TOTAL_ERR_COR 2
What: /sys/bus/pci/devices/<dev>/aer_dev_fatal
Date: July 2018
@ -39,28 +38,27 @@ Description: List of uncorrectable fatal errors seen and reported by this
PCI device using ERR_FATAL. Note that since multiple errors may
be reported using a single ERR_FATAL message, thus
TOTAL_ERR_FATAL at the end of the file may not match the actual
total of all the errors in the file. Sample output:
-------------------------------------------------------------------------
localhost /sys/devices/pci0000:00/0000:00:1c.0 # cat aer_dev_fatal
Undefined 0
Data Link Protocol 0
Surprise Down Error 0
Poisoned TLP 0
Flow Control Protocol 0
Completion Timeout 0
Completer Abort 0
Unexpected Completion 0
Receiver Overflow 0
Malformed TLP 0
ECRC 0
Unsupported Request 0
ACS Violation 0
Uncorrectable Internal Error 0
MC Blocked TLP 0
AtomicOp Egress Blocked 0
TLP Prefix Blocked Error 0
TOTAL_ERR_FATAL 0
-------------------------------------------------------------------------
total of all the errors in the file. Sample output::
localhost /sys/devices/pci0000:00/0000:00:1c.0 # cat aer_dev_fatal
Undefined 0
Data Link Protocol 0
Surprise Down Error 0
Poisoned TLP 0
Flow Control Protocol 0
Completion Timeout 0
Completer Abort 0
Unexpected Completion 0
Receiver Overflow 0
Malformed TLP 0
ECRC 0
Unsupported Request 0
ACS Violation 0
Uncorrectable Internal Error 0
MC Blocked TLP 0
AtomicOp Egress Blocked 0
TLP Prefix Blocked Error 0
TOTAL_ERR_FATAL 0
What: /sys/bus/pci/devices/<dev>/aer_dev_nonfatal
Date: July 2018
@ -70,32 +68,31 @@ Description: List of uncorrectable nonfatal errors seen and reported by this
PCI device using ERR_NONFATAL. Note that since multiple errors
may be reported using a single ERR_FATAL message, thus
TOTAL_ERR_NONFATAL at the end of the file may not match the
actual total of all the errors in the file. Sample output:
-------------------------------------------------------------------------
localhost /sys/devices/pci0000:00/0000:00:1c.0 # cat aer_dev_nonfatal
Undefined 0
Data Link Protocol 0
Surprise Down Error 0
Poisoned TLP 0
Flow Control Protocol 0
Completion Timeout 0
Completer Abort 0
Unexpected Completion 0
Receiver Overflow 0
Malformed TLP 0
ECRC 0
Unsupported Request 0
ACS Violation 0
Uncorrectable Internal Error 0
MC Blocked TLP 0
AtomicOp Egress Blocked 0
TLP Prefix Blocked Error 0
TOTAL_ERR_NONFATAL 0
-------------------------------------------------------------------------
actual total of all the errors in the file. Sample output::
localhost /sys/devices/pci0000:00/0000:00:1c.0 # cat aer_dev_nonfatal
Undefined 0
Data Link Protocol 0
Surprise Down Error 0
Poisoned TLP 0
Flow Control Protocol 0
Completion Timeout 0
Completer Abort 0
Unexpected Completion 0
Receiver Overflow 0
Malformed TLP 0
ECRC 0
Unsupported Request 0
ACS Violation 0
Uncorrectable Internal Error 0
MC Blocked TLP 0
AtomicOp Egress Blocked 0
TLP Prefix Blocked Error 0
TOTAL_ERR_NONFATAL 0
============================
PCIe Rootport AER statistics
============================
----------------------------
These attributes show up under only the rootports (or root complex event
collectors) that are AER capable. These indicate the number of error messages as
"reported to" the rootport. Please note that the rootports also transmit

23
Documentation/ABI/testing/sysfs-bus-rapidio
View File

@ -4,24 +4,27 @@ Description:
an individual subdirectory with the following name format of
device_name "nn:d:iiii", where:
nn - two-digit hexadecimal ID of RapidIO network where the
==== ========================================================
nn two-digit hexadecimal ID of RapidIO network where the
device resides
d - device type: 'e' - for endpoint or 's' - for switch
iiii - four-digit device destID for endpoints, or switchID for
d device type: 'e' - for endpoint or 's' - for switch
iiii four-digit device destID for endpoints, or switchID for
switches
==== ========================================================
For example, below is a list of device directories that
represents a typical RapidIO network with one switch, one host,
and two agent endpoints, as it is seen by the enumerating host
(with destID = 1):
(with destID = 1)::
/sys/bus/rapidio/devices/00:e:0000
/sys/bus/rapidio/devices/00:e:0002
/sys/bus/rapidio/devices/00:s:0001
/sys/bus/rapidio/devices/00:e:0000
/sys/bus/rapidio/devices/00:e:0002
/sys/bus/rapidio/devices/00:s:0001
NOTE: An enumerating or discovering endpoint does not create a
sysfs entry for itself, this is why an endpoint with destID=1 is
not shown in the list.
NOTE:
An enumerating or discovering endpoint does not create a
sysfs entry for itself, this is why an endpoint with destID=1
is not shown in the list.
Attributes Common for All RapidIO Devices
-----------------------------------------

40
Documentation/ABI/testing/sysfs-bus-thunderbolt
View File

@ -37,16 +37,18 @@ Contact: thunderbolt-software@lists.01.org
Description: This attribute holds current Thunderbolt security level
set by the system BIOS. Possible values are:
none: All devices are automatically authorized
user: Devices are only authorized based on writing
appropriate value to the authorized attribute
secure: Require devices that support secure connect at
minimum. User needs to authorize each device.
dponly: Automatically tunnel Display port (and USB). No
PCIe tunnels are created.
usbonly: Automatically tunnel USB controller of the
======= ==================================================
none All devices are automatically authorized
user Devices are only authorized based on writing
appropriate value to the authorized attribute
secure Require devices that support secure connect at
minimum. User needs to authorize each device.
dponly Automatically tunnel Display port (and USB). No
PCIe tunnels are created.
usbonly Automatically tunnel USB controller of the
connected Thunderbolt dock (and Display Port). All
PCIe links downstream of the dock are removed.
======= ==================================================
What: /sys/bus/thunderbolt/devices/.../authorized
Date: Sep 2017
@ -61,17 +63,23 @@ Description: This attribute is used to authorize Thunderbolt devices
yet authorized.
Possible values are supported:
1: The device will be authorized and connected
== ===========================================
1 The device will be authorized and connected
== ===========================================
When key attribute contains 32 byte hex string the possible
values are:
1: The 32 byte hex string is added to the device NVM and
the device is authorized.
2: Send a challenge based on the 32 byte hex string. If the
challenge response from device is valid, the device is
authorized. In case of failure errno will be ENOKEY if
the device did not contain a key at all, and
EKEYREJECTED if the challenge response did not match.
== ========================================================
1 The 32 byte hex string is added to the device NVM and
the device is authorized.
2 Send a challenge based on the 32 byte hex string. If the
challenge response from device is valid, the device is
authorized. In case of failure errno will be ENOKEY if
the device did not contain a key at all, and
EKEYREJECTED if the challenge response did not match.
== ========================================================
What: /sys/bus/thunderbolt/devices/.../boot
Date: Jun 2018

30
Documentation/ABI/testing/sysfs-bus-usb
View File

@ -72,24 +72,27 @@ Description:
table at compile time. The format for the device ID is:
idVendor idProduct bInterfaceClass RefIdVendor RefIdProduct
The vendor ID and device ID fields are required, the
rest is optional. The Ref* tuple can be used to tell the
rest is optional. The `Ref*` tuple can be used to tell the
driver to use the same driver_data for the new device as
it is used for the reference device.
Upon successfully adding an ID, the driver will probe
for the device and attempt to bind to it. For example:
# echo "8086 10f5" > /sys/bus/usb/drivers/foo/new_id
for the device and attempt to bind to it. For example::
# echo "8086 10f5" > /sys/bus/usb/drivers/foo/new_id
Here add a new device (0458:7045) using driver_data from
an already supported device (0458:704c):
# echo "0458 7045 0 0458 704c" > /sys/bus/usb/drivers/foo/new_id
an already supported device (0458:704c)::
# echo "0458 7045 0 0458 704c" > /sys/bus/usb/drivers/foo/new_id
Reading from this file will list all dynamically added
device IDs in the same format, with one entry per
line. For example:
# cat /sys/bus/usb/drivers/foo/new_id
8086 10f5
dead beef 06
f00d cafe
line. For example::
# cat /sys/bus/usb/drivers/foo/new_id
8086 10f5
dead beef 06
f00d cafe
The list will be truncated at PAGE_SIZE bytes due to
sysfs restrictions.
@ -209,6 +212,7 @@ Description:
advance, and behaves well according to the specification.
This attribute is a bit-field that controls the behavior of
a specific port:
- Bit 0 of this field selects the "old" enumeration scheme,
as it is considerably faster (it only causes one USB reset
instead of 2).
@ -233,10 +237,10 @@ Description:
poll() for monitoring changes to this value in user space.
Any time this value changes the corresponding hub device will send a
udev event with the following attributes:
udev event with the following attributes::
OVER_CURRENT_PORT=/sys/bus/usb/devices/.../(hub interface)/portX
OVER_CURRENT_COUNT=[current value of this sysfs attribute]
OVER_CURRENT_PORT=/sys/bus/usb/devices/.../(hub interface)/portX
OVER_CURRENT_COUNT=[current value of this sysfs attribute]
What: /sys/bus/usb/devices/.../(hub interface)/portX/usb3_lpm_permit
Date: November 2015

7
Documentation/ABI/testing/sysfs-bus-usb-devices-usbsevseg
View File

@ -12,8 +12,11 @@ KernelVersion: 2.6.26
Contact: Harrison Metzger <harrisonmetz@gmail.com>
Description: Controls the devices display mode.
For a 6 character display the values are
MSB 0x06; LSB 0x3F, and
for an 8 character display the values are
MSB 0x08; LSB 0xFF.
What: /sys/bus/usb/.../textmode
@ -37,7 +40,7 @@ KernelVersion: 2.6.26
Contact: Harrison Metzger <harrisonmetz@gmail.com>
Description: Controls the decimal places on the device.
To set the nth decimal place, give this field
the value of 10 ** n. Assume this field has
the value of ``10 ** n``. Assume this field has
the value k and has 1 or more decimal places set,
to set the mth place (where m is not already set),
change this fields value to k + 10 ** m.
change this fields value to ``k + 10 ** m``.

10
Documentation/ABI/testing/sysfs-bus-vfio-mdev
View File

@ -28,8 +28,9 @@ Description:
Writing UUID to this file will create mediated device of
type <type-id> for parent device <device>. This is a
write-only file.
For example:
# echo "83b8f4f2-509f-382f-3c1e-e6bfe0fa1001" > \
For example::
# echo "83b8f4f2-509f-382f-3c1e-e6bfe0fa1001" > \
/sys/devices/foo/mdev_supported_types/foo-1/create
What: /sys/.../mdev_supported_types/<type-id>/devices/
@ -107,5 +108,6 @@ Description:
Writing '1' to this file destroys the mediated device. The
vendor driver can fail the remove() callback if that device
is active and the vendor driver doesn't support hot unplug.
Example:
# echo 1 > /sys/bus/mdev/devices/<UUID>/remove
Example::
# echo 1 > /sys/bus/mdev/devices/<UUID>/remove

15
Documentation/ABI/testing/sysfs-class-cxl
View File

@ -72,11 +72,16 @@ Description: read/write
when performing the START_WORK ioctl. Only applicable when
running under hashed page table mmu.
Possible values:
none: No prefaulting (default)
work_element_descriptor: Treat the work element
descriptor as an effective address and
prefault what it points to.
all: all segments process calling START_WORK maps.
======================= ======================================
none No prefaulting (default)
work_element_descriptor Treat the work element
descriptor as an effective address and
prefault what it points to.
all all segments process calling
START_WORK maps.
======================= ======================================
Users: https://github.com/ibm-capi/libcxl
What: /sys/class/cxl/<afu>/reset

2
Documentation/ABI/testing/sysfs-class-led
View File

@ -50,7 +50,7 @@ Description:
You can change triggers in a similar manner to the way an IO
scheduler is chosen. Trigger specific parameters can appear in
/sys/class/leds/<led> once a given trigger is selected. For
their documentation see sysfs-class-led-trigger-*.
their documentation see `sysfs-class-led-trigger-*`.
What: /sys/class/leds/<led>/inverted
Date: January 2011

229
Documentation/ABI/testing/sysfs-class-led-driver-el15203000
View File

@ -6,127 +6,132 @@ Description:
The LEDs board supports only predefined patterns by firmware
for specific LEDs.
Breathing mode for Screen frame light tube:
"0 4000 1 4000"
Breathing mode for Screen frame light tube::
^
|
Max-| ---
| / \
| / \
| / \ /
| / \ /
Min-|- ---
|
0------4------8--> time (sec)
"0 4000 1 4000"
Cascade mode for Pipe LED:
"1 800 2 800 4 800 8 800 16 800"
^
|
Max-| ---
| / \
| / \
| / \ /
| / \ /
Min-|- ---
|
0------4------8--> time (sec)
^
|
0 On -|----+ +----+ +---
| | | | |
Off-| +-------------------+ +-------------------+
|
1 On -| +----+ +----+
| | | | |
Off |----+ +-------------------+ +------------------
|
2 On -| +----+ +----+
| | | | |
Off-|---------+ +-------------------+ +-------------
|
3 On -| +----+ +----+
| | | | |
Off-|--------------+ +-------------------+ +--------
|
4 On -| +----+ +----+
| | | | |
Off-|-------------------+ +-------------------+ +---
|
0---0.8--1.6--2.4--3.2---4---4.8--5.6--6.4--7.2---8--> time (sec)
Cascade mode for Pipe LED::
Inverted cascade mode for Pipe LED:
"30 800 29 800 27 800 23 800 15 800"
"1 800 2 800 4 800 8 800 16 800"
^
|
0 On -| +-------------------+ +-------------------+
| | | | |
Off-|----+ +----+ +---
|
1 On -|----+ +-------------------+ +------------------
| | | | |
Off | +----+ +----+
|
2 On -|---------+ +-------------------+ +-------------
| | | | |
Off-| +----+ +----+
|
3 On -|--------------+ +-------------------+ +--------
| | | | |
Off-| +----+ +----+
|
4 On -|-------------------+ +-------------------+ +---
| | | | |
Off-| +----+ +----+
|
0---0.8--1.6--2.4--3.2---4---4.8--5.6--6.4--7.2---8--> time (sec)
^
|
0 On -|----+ +----+ +---
| | | | |
Off-| +-------------------+ +-------------------+
|
1 On -| +----+ +----+
| | | | |
Off |----+ +-------------------+ +------------------
|
2 On -| +----+ +----+
| | | | |
Off-|---------+ +-------------------+ +-------------
|
3 On -| +----+ +----+
| | | | |
Off-|--------------+ +-------------------+ +--------
|
4 On -| +----+ +----+
| | | | |
Off-|-------------------+ +-------------------+ +---
|
0---0.8--1.6--2.4--3.2---4---4.8--5.6--6.4--7.2---8--> time (sec)
Bounce mode for Pipe LED:
"1 800 2 800 4 800 8 800 16 800 16 800 8 800 4 800 2 800 1 800"
Inverted cascade mode for Pipe LED::
^
|
0 On -|----+ +--------
| | |
Off-| +---------------------------------------+
|
1 On -| +----+ +----+
| | | | |
Off |----+ +-----------------------------+ +--------
|
2 On -| +----+ +----+
| | | | |
Off-|---------+ +-------------------+ +-------------
|
3 On -| +----+ +----+
| | | | |
Off-|--------------+ +---------+ +------------------
|
4 On -| +---------+
| | |
Off-|-------------------+ +-----------------------
|
0---0.8--1.6--2.4--3.2---4---4.8--5.6--6.4--7.2---8--> time (sec)
"30 800 29 800 27 800 23 800 15 800"
Inverted bounce mode for Pipe LED:
"30 800 29 800 27 800 23 800 15 800 15 800 23 800 27 800 29 800 30 800"
^
|
0 On -| +-------------------+ +-------------------+
| | | | |
Off-|----+ +----+ +---
|
1 On -|----+ +-------------------+ +------------------
| | | | |
Off | +----+ +----+
|
2 On -|---------+ +-------------------+ +-------------
| | | | |
Off-| +----+ +----+
|
3 On -|--------------+ +-------------------+ +--------
| | | | |
Off-| +----+ +----+
|
4 On -|-------------------+ +-------------------+ +---
| | | | |
Off-| +----+ +----+
|
0---0.8--1.6--2.4--3.2---4---4.8--5.6--6.4--7.2---8--> time (sec)
^
|
0 On -| +---------------------------------------+
| | |
Off-|----+ +--------
|
1 On -|----+ +-----------------------------+ +--------
| | | | |
Off | +----+ +----+
|
2 On -|---------+ +-------------------+ +-------------
| | | | |
Off-| +----+ +----+
|
3 On -|--------------+ +---------+ +------------------
| | | | |
Off-| +----+ +----+
|
4 On -|-------------------+ +-----------------------
| | |
Off-| +---------+
|
0---0.8--1.6--2.4--3.2---4---4.8--5.6--6.4--7.2---8--> time (sec)
Bounce mode for Pipe LED::
"1 800 2 800 4 800 8 800 16 800 16 800 8 800 4 800 2 800 1 800"
^
|
0 On -|----+ +--------
| | |
Off-| +---------------------------------------+
|
1 On -| +----+ +----+
| | | | |
Off |----+ +-----------------------------+ +--------
|
2 On -| +----+ +----+
| | | | |
Off-|---------+ +-------------------+ +-------------
|
3 On -| +----+ +----+
| | | | |
Off-|--------------+ +---------+ +------------------
|
4 On -| +---------+
| | |
Off-|-------------------+ +-----------------------
|
0---0.8--1.6--2.4--3.2---4---4.8--5.6--6.4--7.2---8--> time (sec)
Inverted bounce mode for Pipe LED::
"30 800 29 800 27 800 23 800 15 800 15 800 23 800 27 800 29 800 30 800"
^
|
0 On -| +---------------------------------------+
| | |
Off-|----+ +--------
|
1 On -|----+ +-----------------------------+ +--------
| | | | |
Off | +----+ +----+
|
2 On -|---------+ +-------------------+ +-------------
| | | | |
Off-| +----+ +----+
|
3 On -|--------------+ +---------+ +------------------
| | | | |
Off-| +----+ +----+
|
4 On -|-------------------+ +-----------------------
| | |
Off-| +---------+
|
0---0.8--1.6--2.4--3.2---4---4.8--5.6--6.4--7.2---8--> time (sec)
What: /sys/class/leds/<led>/repeat
Date: September 2019

4
Documentation/ABI/testing/sysfs-class-led-driver-sc27xx
View File

@ -12,8 +12,8 @@ Description:
format, we should set brightness as 0 for rise stage, fall
stage and low stage.
Min stage duration: 125 ms
Max stage duration: 31875 ms
- Min stage duration: 125 ms
- Max stage duration: 31875 ms
Since the stage duration step is 125 ms, the duration should be
a multiplier of 125, like 125ms, 250ms, 375ms, 500ms ... 31875ms.

52
Documentation/ABI/testing/sysfs-class-mic
View File

@ -41,24 +41,33 @@ Description:
When read, this entry provides the current state of an Intel
MIC device in the context of the card OS. Possible values that
will be read are:
"ready" - The MIC device is ready to boot the card OS. On
reading this entry after an OSPM resume, a "boot" has to be
written to this entry if the card was previously shutdown
during OSPM suspend.
"booting" - The MIC device has initiated booting a card OS.
"online" - The MIC device has completed boot and is online
"shutting_down" - The card OS is shutting down.
"resetting" - A reset has been initiated for the MIC device
"reset_failed" - The MIC device has failed to reset.
=============== ===============================================
"ready" The MIC device is ready to boot the card OS.
On reading this entry after an OSPM resume,
a "boot" has to be written to this entry if
the card was previously shutdown during OSPM
suspend.
"booting" The MIC device has initiated booting a card OS.
"online" The MIC device has completed boot and is online
"shutting_down" The card OS is shutting down.
"resetting" A reset has been initiated for the MIC device
"reset_failed" The MIC device has failed to reset.
=============== ===============================================
When written, this sysfs entry triggers different state change
operations depending upon the current state of the card OS.
Acceptable values are:
"boot" - Boot the card OS image specified by the combination
of firmware, ramdisk, cmdline and bootmode
sysfs entries.
"reset" - Initiates device reset.
"shutdown" - Initiates card OS shutdown.
========== ===================================================
"boot" Boot the card OS image specified by the combination
of firmware, ramdisk, cmdline and bootmode
sysfs entries.
"reset" Initiates device reset.
"shutdown" Initiates card OS shutdown.
========== ===================================================
What: /sys/class/mic/mic(x)/shutdown_status
Date: October 2013
@ -69,12 +78,15 @@ Description:
OS can shutdown because of various reasons. When read, this
entry provides the status on why the card OS was shutdown.
Possible values are:
"nop" - shutdown status is not applicable, when the card OS is
"online"
"crashed" - Shutdown because of a HW or SW crash.
"halted" - Shutdown because of a halt command.
"poweroff" - Shutdown because of a poweroff command.
"restart" - Shutdown because of a restart command.
========== ===================================================
"nop" shutdown status is not applicable, when the card OS
is "online"
"crashed" Shutdown because of a HW or SW crash.
"halted" Shutdown because of a halt command.
"poweroff" Shutdown because of a poweroff command.
"restart" Shutdown because of a restart command.
========== ===================================================
What: /sys/class/mic/mic(x)/cmdline
Date: October 2013

3
Documentation/ABI/testing/sysfs-class-ocxl
View File

@ -11,8 +11,11 @@ Contact: linuxppc-dev@lists.ozlabs.org
Description: read only
Number of contexts for the AFU, in the format <n>/<max>
where:
==== ===============================================
n: number of currently active contexts, for debug
max: maximum number of contexts supported by the AFU
==== ===============================================
What: /sys/class/ocxl/<afu name>/pp_mmio_size
Date: January 2018

73
Documentation/ABI/testing/sysfs-class-power
View File

@ -1,4 +1,4 @@
===== General Properties =====
**General Properties**
What: /sys/class/power_supply/<supply_name>/manufacturer
Date: May 2007
@ -72,6 +72,7 @@ Description:
critically low).
Access: Read, Write
Valid values: 0 - 100 (percent)
What: /sys/class/power_supply/<supply_name>/capacity_error_margin
@ -96,7 +97,9 @@ Description:
Coarse representation of battery capacity.
Access: Read
Valid values: "Unknown", "Critical", "Low", "Normal", "High",
Valid values:
"Unknown", "Critical", "Low", "Normal", "High",
"Full"
What: /sys/class/power_supply/<supply_name>/current_avg
@ -139,6 +142,7 @@ Description:
throttling for thermal cooling or improving battery health.
Access: Read, Write
Valid values: Represented in microamps
What: /sys/class/power_supply/<supply_name>/charge_control_limit_max
@ -148,6 +152,7 @@ Description:
Maximum legal value for the charge_control_limit property.
Access: Read
Valid values: Represented in microamps
What: /sys/class/power_supply/<supply_name>/charge_control_start_threshold
@ -168,6 +173,7 @@ Description:
stop.
Access: Read, Write
Valid values: 0 - 100 (percent)
What: /sys/class/power_supply/<supply_name>/charge_type
@ -183,7 +189,9 @@ Description:
different algorithm.
Access: Read, Write
Valid values: "Unknown", "N/A", "Trickle", "Fast", "Standard",
Valid values:
"Unknown", "N/A", "Trickle", "Fast", "Standard",
"Adaptive", "Custom"
What: /sys/class/power_supply/<supply_name>/charge_term_current
@ -194,6 +202,7 @@ Description:
when the battery is considered full and charging should end.
Access: Read
Valid values: Represented in microamps
What: /sys/class/power_supply/<supply_name>/health
@ -204,7 +213,9 @@ Description:
functionality.
Access: Read
Valid values: "Unknown", "Good", "Overheat", "Dead",
Valid values:
"Unknown", "Good", "Overheat", "Dead",
"Over voltage", "Unspecified failure", "Cold",
"Watchdog timer expire", "Safety timer expire",
"Over current", "Calibration required", "Warm",
@ -218,6 +229,7 @@ Description:
for a battery charge cycle.
Access: Read
Valid values: Represented in microamps
What: /sys/class/power_supply/<supply_name>/present
@ -227,9 +239,13 @@ Description:
Reports whether a battery is present or not in the system.
Access: Read
Valid values:
== =======
0: Absent
1: Present
== =======
What: /sys/class/power_supply/<supply_name>/status
Date: May 2007
@ -240,7 +256,9 @@ Description:
used to enable/disable charging to the battery.
Access: Read, Write
Valid values: "Unknown", "Charging", "Discharging",
Valid values:
"Unknown", "Charging", "Discharging",
"Not charging", "Full"
What: /sys/class/power_supply/<supply_name>/technology
@ -250,7 +268,9 @@ Description:
Describes the battery technology supported by the supply.
Access: Read
Valid values: "Unknown", "NiMH", "Li-ion", "Li-poly", "LiFe",
Valid values:
"Unknown", "NiMH", "Li-ion", "Li-poly", "LiFe",
"NiCd", "LiMn"
What: /sys/class/power_supply/<supply_name>/temp
@ -260,6 +280,7 @@ Description:
Reports the current TBAT battery temperature reading.
Access: Read
Valid values: Represented in 1/10 Degrees Celsius
What: /sys/class/power_supply/<supply_name>/temp_alert_max
@ -274,6 +295,7 @@ Description:
critically high, and charging has stopped).
Access: Read
Valid values: Represented in 1/10 Degrees Celsius
What: /sys/class/power_supply/<supply_name>/temp_alert_min
@ -289,6 +311,7 @@ Description:
remedy the situation).
Access: Read
Valid values: Represented in 1/10 Degrees Celsius
What: /sys/class/power_supply/<supply_name>/temp_max
@ -299,6 +322,7 @@ Description:
charging.
Access: Read
Valid values: Represented in 1/10 Degrees Celsius
What: /sys/class/power_supply/<supply_name>/temp_min
@ -309,6 +333,7 @@ Description:
charging.
Access: Read
Valid values: Represented in 1/10 Degrees Celsius
What: /sys/class/power_supply/<supply_name>/voltage_avg,
@ -320,6 +345,7 @@ Description:
which they average readings to smooth out the reported value.
Access: Read
Valid values: Represented in microvolts
What: /sys/class/power_supply/<supply_name>/voltage_max,
@ -330,6 +356,7 @@ Description:
during charging.
Access: Read
Valid values: Represented in microvolts
What: /sys/class/power_supply/<supply_name>/voltage_min,
@ -340,6 +367,7 @@ Description:
during discharging.
Access: Read
Valid values: Represented in microvolts
What: /sys/class/power_supply/<supply_name>/voltage_now,
@ -350,9 +378,10 @@ Description:
This value is not averaged/smoothed.
Access: Read
Valid values: Represented in microvolts
===== USB Properties =====
**USB Properties**
What: /sys/class/power_supply/<supply_name>/current_avg
Date: May 2007
@ -363,6 +392,7 @@ Description:
average readings to smooth out the reported value.
Access: Read
Valid values: Represented in microamps
@ -373,6 +403,7 @@ Description:
Reports the maximum IBUS current the supply can support.
Access: Read
Valid values: Represented in microamps
What: /sys/class/power_supply/<supply_name>/current_now
@ -385,6 +416,7 @@ Description:
within the reported min/max range.
Access: Read, Write
Valid values: Represented in microamps
What: /sys/class/power_supply/<supply_name>/input_current_limit
@ -399,6 +431,7 @@ Description:
solved using power limit use input_current_limit.
Access: Read, Write
Valid values: Represented in microamps
What: /sys/class/power_supply/<supply_name>/input_voltage_limit
@ -441,10 +474,14 @@ Description:
USB supply so voltage and current can be controlled).
Access: Read, Write
Valid values:
== ==================================================
0: Offline
1: Online Fixed - Fixed Voltage Supply
2: Online Programmable - Programmable Voltage Supply
== ==================================================
What: /sys/class/power_supply/<supply_name>/temp
Date: May 2007
@ -455,6 +492,7 @@ Description:
TJUNC temperature of an IC)
Access: Read
Valid values: Represented in 1/10 Degrees Celsius
What: /sys/class/power_supply/<supply_name>/temp_alert_max
@ -470,6 +508,7 @@ Description:
remedy the situation).
Access: Read
Valid values: Represented in 1/10 Degrees Celsius
What: /sys/class/power_supply/<supply_name>/temp_alert_min
@ -485,6 +524,7 @@ Description:
accordingly to remedy the situation).
Access: Read
Valid values: Represented in 1/10 Degrees Celsius
What: /sys/class/power_supply/<supply_name>/temp_max
@ -494,6 +534,7 @@ Description:
Reports the maximum allowed supply temperature for operation.
Access: Read
Valid values: Represented in 1/10 Degrees Celsius
What: /sys/class/power_supply/<supply_name>/temp_min
@ -503,6 +544,7 @@ Description:
Reports the mainimum allowed supply temperature for operation.
Access: Read
Valid values: Represented in 1/10 Degrees Celsius
What: /sys/class/power_supply/<supply_name>/usb_type
@ -514,7 +556,9 @@ Description:
is attached.
Access: Read-Only
Valid values: "Unknown", "SDP", "DCP", "CDP", "ACA", "C", "PD",
Valid values:
"Unknown", "SDP", "DCP", "CDP", "ACA", "C", "PD",
"PD_DRP", "PD_PPS", "BrickID"
What: /sys/class/power_supply/<supply_name>/voltage_max
@ -524,6 +568,7 @@ Description:
Reports the maximum VBUS voltage the supply can support.
Access: Read
Valid values: Represented in microvolts
What: /sys/class/power_supply/<supply_name>/voltage_min
@ -533,6 +578,7 @@ Description:
Reports the minimum VBUS voltage the supply can support.
Access: Read
Valid values: Represented in microvolts
What: /sys/class/power_supply/<supply_name>/voltage_now
@ -545,9 +591,10 @@ Description:
within the reported min/max range.
Access: Read, Write
Valid values: Represented in microvolts
===== Device Specific Properties =====
**Device Specific Properties**
What: /sys/class/power/ds2760-battery.*/charge_now
Date: May 2010
@ -581,6 +628,7 @@ Description:
will drop to 0 A) and will trigger interrupt.
Valid values:
- 5, 6 or 7 (hours),
- 0: disabled.
@ -595,6 +643,7 @@ Description:
will drop to 0 A) and will trigger interrupt.
Valid values:
- 4 - 16 (hours), step by 2 (rounded down)
- 0: disabled.
@ -609,6 +658,7 @@ Description:
interrupt and start top-off charging mode.
Valid values:
- 100000 - 200000 (microamps), step by 25000 (rounded down)
- 200000 - 350000 (microamps), step by 50000 (rounded down)
- 0: disabled.
@ -624,6 +674,7 @@ Description:
will drop to 0 A) and will trigger interrupt.
Valid values:
- 0 - 70 (minutes), step by 10 (rounded down)
What: /sys/class/power_supply/bq24257-charger/ovp_voltage
@ -637,6 +688,7 @@ Description:
device datasheet for details.
Valid values:
- 6000000, 6500000, 7000000, 8000000, 9000000, 9500000, 10000000,
10500000 (all uV)
@ -652,6 +704,7 @@ Description:
lower than the set value. See device datasheet for details.
Valid values:
- 4200000, 4280000, 4360000, 4440000, 4520000, 4600000, 4680000,
4760000 (all uV)
@ -666,6 +719,7 @@ Description:
the charger operates normally. See device datasheet for details.
Valid values:
- 1: enabled
- 0: disabled
@ -681,6 +735,7 @@ Description:
from the system. See device datasheet for details.
Valid values:
- 1: enabled
- 0: disabled

33
Documentation/ABI/testing/sysfs-class-power-twl4030
View File

@ -4,18 +4,20 @@ Description:
Writing to this can disable charging.
Possible values are:
"auto" - draw power as appropriate for detected
power source and battery status.
"off" - do not draw any power.
"continuous"
- activate mode described as "linear" in
TWL data sheets. This uses whatever
current is available and doesn't switch off
when voltage drops.
This is useful for unstable power sources
such as bicycle dynamo, but care should
be taken that battery is not over-charged.
============= ===========================================
"auto" draw power as appropriate for detected
power source and battery status.
"off" do not draw any power.
"continuous" activate mode described as "linear" in
TWL data sheets. This uses whatever
current is available and doesn't switch off
when voltage drops.
This is useful for unstable power sources
such as bicycle dynamo, but care should
be taken that battery is not over-charged.
============= ===========================================
What: /sys/class/power_supply/twl4030_ac/mode
Description:
@ -23,6 +25,9 @@ Description:
Writing to this can disable charging.
Possible values are:
"auto" - draw power as appropriate for detected
power source and battery status.
"off" - do not draw any power.
====== ===========================================
"auto" draw power as appropriate for detected
power source and battery status.
"off" do not draw any power.
====== ===========================================

30
Documentation/ABI/testing/sysfs-class-rc
View File

@ -21,15 +21,22 @@ KernelVersion: 2.6.36
Contact: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Description:
Reading this file returns a list of available protocols,
something like:
something like::
"rc5 [rc6] nec jvc [sony]"
Enabled protocols are shown in [] brackets.
Writing "+proto" will add a protocol to the list of enabled
protocols.
Writing "-proto" will remove a protocol from the list of enabled
protocols.
Writing "proto" will enable only "proto".
Writing "none" will disable all protocols.
Write fails with EINVAL if an invalid protocol combination or
unknown protocol name is used.
@ -39,11 +46,13 @@ KernelVersion: 3.15
Contact: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Description:
Sets the scancode filter expected value.
Use in combination with /sys/class/rc/rcN/filter_mask to set the
expected value of the bits set in the filter mask.
If the hardware supports it then scancodes which do not match
the filter will be ignored. Otherwise the write will fail with
an error.
This value may be reset to 0 if the current protocol is altered.
What: /sys/class/rc/rcN/filter_mask
@ -56,9 +65,11 @@ Description:
of the scancode which should be compared against the expected
value. A value of 0 disables the filter to allow all valid
scancodes to be processed.
If the hardware supports it then scancodes which do not match
the filter will be ignored. Otherwise the write will fail with
an error.
This value may be reset to 0 if the current protocol is altered.
What: /sys/class/rc/rcN/wakeup_protocols
@ -67,15 +78,22 @@ KernelVersion: 4.11
Contact: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Description:
Reading this file returns a list of available protocols to use
for the wakeup filter, something like:
for the wakeup filter, something like::
"rc-5 nec nec-x rc-6-0 rc-6-6a-24 [rc-6-6a-32] rc-6-mce"
Note that protocol variants are listed, so "nec", "sony",
"rc-5", "rc-6" have their different bit length encodings
listed if available.
The enabled wakeup protocol is shown in [] brackets.
Only one protocol can be selected at a time.
Writing "proto" will use "proto" for wakeup events.
Writing "none" will disable wakeup.
Write fails with EINVAL if an invalid protocol combination or
unknown protocol name is used, or if wakeup is not supported by
the hardware.
@ -86,13 +104,17 @@ KernelVersion: 3.15
Contact: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Description:
Sets the scancode wakeup filter expected value.
Use in combination with /sys/class/rc/rcN/wakeup_filter_mask to
set the expected value of the bits set in the wakeup filter mask
to trigger a system wake event.
If the hardware supports it and wakeup_filter_mask is not 0 then
scancodes which match the filter will wake the system from e.g.
suspend to RAM or power off.
Otherwise the write will fail with an error.
This value may be reset to 0 if the wakeup protocol is altered.
What: /sys/class/rc/rcN/wakeup_filter_mask
@ -101,11 +123,15 @@ KernelVersion: 3.15
Contact: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Description:
Sets the scancode wakeup filter mask of bits to compare.
Use in combination with /sys/class/rc/rcN/wakeup_filter to set
the bits of the scancode which should be compared against the
expected value to trigger a system wake event.
If the hardware supports it and wakeup_filter_mask is not 0 then
scancodes which match the filter will wake the system from e.g.
suspend to RAM or power off.
Otherwise the write will fail with an error.
This value may be reset to 0 if the wakeup protocol is altered.

7
Documentation/ABI/testing/sysfs-class-scsi_host
View File

@ -56,8 +56,9 @@ Description:
management) on top, which makes it match the Windows IRST (Intel
Rapid Storage Technology) driver settings. This setting is also
close to min_power, except that:
a) It does not use host-initiated slumber mode, but it does
allow device-initiated slumber
allow device-initiated slumber
b) It does not enable low power device sleep mode (DevSlp).
What: /sys/class/scsi_host/hostX/em_message
@ -70,8 +71,8 @@ Description:
protocol, writes and reads correspond to the LED message format
as defined in the AHCI spec.
The user must turn sw_activity (under /sys/block/*/device/) OFF
it they wish to control the activity LED via the em_message
The user must turn sw_activity (under `/sys/block/*/device/`)
OFF it they wish to control the activity LED via the em_message
file.
em_message_type: (RO) Displays the current enclosure management

12
Documentation/ABI/testing/sysfs-class-typec
View File

@ -40,10 +40,13 @@ Description:
attribute will not return until the operation has finished.
Valid values:
- source (The port will behave as source only DFP port)
- sink (The port will behave as sink only UFP port)
- dual (The port will behave as dual-role-data and
====== ==============================================
source (The port will behave as source only DFP port)
sink (The port will behave as sink only UFP port)
dual (The port will behave as dual-role-data and
dual-role-power port)
====== ==============================================
What: /sys/class/typec/<port>/vconn_source
Date: April 2017
@ -59,6 +62,7 @@ Description:
generates uevent KOBJ_CHANGE.
Valid values:
- "no" when the port is not the VCONN Source
- "yes" when the port is the VCONN Source
@ -72,6 +76,7 @@ Description:
power operation mode should show "usb_power_delivery".
Valid values:
- default
- 1.5A
- 3.0A
@ -191,6 +196,7 @@ Date: April 2017
Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Description:
Shows type of the plug on the cable:
- type-a - Standard A
- type-b - Standard B
- type-c

4
Documentation/ABI/testing/sysfs-devices-platform-ACPI-TAD
View File

@ -7,6 +7,7 @@ Description:
(RO) Hexadecimal bitmask of the TAD attributes are reported by
the platform firmware (see ACPI 6.2, section 9.18.2):
======= ======================================================
BIT(0): AC wakeup implemented if set
BIT(1): DC wakeup implemented if set
BIT(2): Get/set real time features implemented if set
@ -16,6 +17,7 @@ Description:
BIT(6): The AC timer wakes up from S5 if set
BIT(7): The DC timer wakes up from S4 if set
BIT(8): The DC timer wakes up from S5 if set
======= ======================================================
The other bits are reserved.
@ -62,9 +64,11 @@ Description:
timer status with the following meaning of bits (see ACPI 6.2,
Section 9.18.5):
======= ======================================================
Bit(0): The timer has expired if set.
Bit(1): The timer has woken up the system from a sleep state
(S3 or S4/S5 if supported) if set.
======= ======================================================
The other bits are reserved.

10
Documentation/ABI/testing/sysfs-devices-platform-docg3
View File

@ -9,8 +9,10 @@ Description:
The protection has information embedded whether it blocks reads,
writes or both.
The result is:
0 -> the DPS is not keylocked
1 -> the DPS is keylocked
- 0 -> the DPS is not keylocked
- 1 -> the DPS is keylocked
Users: None identified so far.
What: /sys/devices/platform/docg3/f[0-3]_dps[01]_protection_key
@ -27,8 +29,12 @@ Description:
Entering the correct value toggle the lock, and can be observed
through f[0-3]_dps[01]_is_keylocked.
Possible values are:
- 8 bytes
Typical values are:
- "00000000"
- "12345678"
Users: None identified so far.

8
Documentation/ABI/testing/sysfs-devices-platform-sh_mobile_lcdc_fb
View File

@ -17,10 +17,10 @@ Description:
to overlay planes.
Selects the composition mode for the overlay. Possible values
are
are:
0 - Alpha Blending
1 - ROP3
- 0 - Alpha Blending
- 1 - ROP3
What: /sys/devices/platform/sh_mobile_lcdc_fb.[0-3]/graphics/fb[0-9]/ovl_position
Date: May 2012
@ -30,7 +30,7 @@ Description:
to overlay planes.
Stores the x,y overlay position on the display in pixels. The
position format is `[0-9]+,[0-9]+'.
position format is `[0-9]+,[0-9]+`.
What: /sys/devices/platform/sh_mobile_lcdc_fb.[0-3]/graphics/fb[0-9]/ovl_rop3
Date: May 2012

99
Documentation/ABI/testing/sysfs-devices-system-cpu
View File

@ -151,23 +151,28 @@ Description:
The processor idle states which are available for use have the
following attributes:
name: (RO) Name of the idle state (string).
======== ==== =================================================
name: (RO) Name of the idle state (string).
latency: (RO) The latency to exit out of this idle state (in
microseconds).
microseconds).
power: (RO) The power consumed while in this idle state (in
milliwatts).
power: (RO) The power consumed while in this idle state (in
milliwatts).
time: (RO) The total time spent in this idle state (in microseconds).
time: (RO) The total time spent in this idle state
(in microseconds).
usage: (RO) Number of times this state was entered (a count).
usage: (RO) Number of times this state was entered (a count).
above: (RO) Number of times this state was entered, but the
observed CPU idle duration was too short for it (a count).
above: (RO) Number of times this state was entered, but the
observed CPU idle duration was too short for it
(a count).
below: (RO) Number of times this state was entered, but the
observed CPU idle duration was too long for it (a count).
below: (RO) Number of times this state was entered, but the
observed CPU idle duration was too long for it
(a count).
======== ==== =================================================
What: /sys/devices/system/cpu/cpuX/cpuidle/stateN/desc
Date: February 2008
@ -290,6 +295,7 @@ Description: Processor frequency boosting control
This switch controls the boost setting for the whole system.
Boosting allows the CPU and the firmware to run at a frequency
beyound it's nominal limit.
More details can be found in
Documentation/admin-guide/pm/cpufreq.rst
@ -337,43 +343,57 @@ Contact: Sudeep Holla <sudeep.holla@arm.com>
Description: Parameters for the CPU cache attributes
allocation_policy:
- WriteAllocate: allocate a memory location to a cache line
on a cache miss because of a write
- ReadAllocate: allocate a memory location to a cache line
- WriteAllocate:
allocate a memory location to a cache line
on a cache miss because of a write
- ReadAllocate:
allocate a memory location to a cache line
on a cache miss because of a read
- ReadWriteAllocate: both writeallocate and readallocate
- ReadWriteAllocate:
both writeallocate and readallocate
attributes: LEGACY used only on IA64 and is same as write_policy
attributes:
LEGACY used only on IA64 and is same as write_policy
coherency_line_size: the minimum amount of data in bytes that gets
coherency_line_size:
the minimum amount of data in bytes that gets
transferred from memory to cache
level: the cache hierarchy in the multi-level cache configuration
level:
the cache hierarchy in the multi-level cache configuration
number_of_sets: total number of sets in the cache, a set is a
number_of_sets:
total number of sets in the cache, a set is a
collection of cache lines with the same cache index
physical_line_partition: number of physical cache line per cache tag
physical_line_partition:
number of physical cache line per cache tag
shared_cpu_list: the list of logical cpus sharing the cache
shared_cpu_list:
the list of logical cpus sharing the cache
shared_cpu_map: logical cpu mask containing the list of cpus sharing
shared_cpu_map:
logical cpu mask containing the list of cpus sharing
the cache
size: the total cache size in kB
size:
the total cache size in kB
type:
- Instruction: cache that only holds instructions
- Data: cache that only caches data
- Unified: cache that holds both data and instructions
ways_of_associativity: degree of freedom in placing a particular block
of memory in the cache
ways_of_associativity:
degree of freedom in placing a particular block
of memory in the cache
write_policy:
- WriteThrough: data is written to both the cache line
- WriteThrough:
data is written to both the cache line
and to the block in the lower-level memory
- WriteBack: data is written only to the cache line and
- WriteBack:
data is written only to the cache line and
the modified cache line is written to main
memory only when it is replaced
@ -414,30 +434,30 @@ Description: POWERNV CPUFreq driver's frequency throttle stats directory and
throttle attributes exported in the 'throttle_stats' directory:
- turbo_stat : This file gives the total number of times the max
frequency is throttled to lower frequency in turbo (at and above
nominal frequency) range of frequencies.
frequency is throttled to lower frequency in turbo (at and above
nominal frequency) range of frequencies.
- sub_turbo_stat : This file gives the total number of times the
max frequency is throttled to lower frequency in sub-turbo(below
nominal frequency) range of frequencies.
max frequency is throttled to lower frequency in sub-turbo(below
nominal frequency) range of frequencies.
- unthrottle : This file gives the total number of times the max
frequency is unthrottled after being throttled.
frequency is unthrottled after being throttled.
- powercap : This file gives the total number of times the max
frequency is throttled due to 'Power Capping'.
frequency is throttled due to 'Power Capping'.
- overtemp : This file gives the total number of times the max
frequency is throttled due to 'CPU Over Temperature'.
frequency is throttled due to 'CPU Over Temperature'.
- supply_fault : This file gives the total number of times the
max frequency is throttled due to 'Power Supply Failure'.
max frequency is throttled due to 'Power Supply Failure'.
- overcurrent : This file gives the total number of times the
max frequency is throttled due to 'Overcurrent'.
max frequency is throttled due to 'Overcurrent'.
- occ_reset : This file gives the total number of times the max
frequency is throttled due to 'OCC Reset'.
frequency is throttled due to 'OCC Reset'.
The sysfs attributes representing different throttle reasons like
powercap, overtemp, supply_fault, overcurrent and occ_reset map to
@ -469,8 +489,9 @@ What: /sys/devices/system/cpu/cpuX/regs/
Date: June 2016
Contact: Linux ARM Kernel Mailing list <linux-arm-kernel@lists.infradead.org>
Description: AArch64 CPU registers
'identification' directory exposes the CPU ID registers for
identifying model and revision of the CPU.
identifying model and revision of the CPU.
What: /sys/devices/system/cpu/cpu#/cpu_capacity
Date: December 2016
@ -497,9 +518,11 @@ Description: Information about CPU vulnerabilities
vulnerabilities. The output of those files reflects the
state of the CPUs in the system. Possible output values:
================ ==============================================
"Not affected" CPU is not affected by the vulnerability
"Vulnerable" CPU is affected and no mitigation in effect
"Mitigation: $M" CPU is affected and mitigation $M is in effect
================ ==============================================
See also: Documentation/admin-guide/hw-vuln/index.rst
@ -515,12 +538,14 @@ Description: Control Symetric Multi Threading (SMT)
control: Read/write interface to control SMT. Possible
values:
================ =========================================
"on" SMT is enabled
"off" SMT is disabled
"forceoff" SMT is force disabled. Cannot be changed.
"notsupported" SMT is not supported by the CPU
"notimplemented" SMT runtime toggling is not
implemented for the architecture
================ =========================================
If control status is "forceoff" or "notsupported" writes
are rejected.

6
Documentation/ABI/testing/sysfs-devices-system-ibm-rtl
View File

@ -5,8 +5,10 @@ Contact: Vernon Mauery <vernux@us.ibm.com>
Description: The state file allows a means by which to change in and
out of Premium Real-Time Mode (PRTM), as well as the
ability to query the current state.
0 => PRTM off
1 => PRTM enabled
- 0 => PRTM off
- 1 => PRTM enabled
Users: The ibm-prtm userspace daemon uses this interface.

4
Documentation/ABI/testing/sysfs-driver-bd9571mwv-regulator
View File

@ -6,11 +6,13 @@ Description: Read/write the current state of DDR Backup Mode, which controls
if DDR power rails will be kept powered during system suspend.
("on"/"1" = enabled, "off"/"0" = disabled).
Two types of power switches (or control signals) can be used:
A. With a momentary power switch (or pulse signal), DDR
Backup Mode is enabled by default when available, as the
PMIC will be configured only during system suspend.
B. With a toggle power switch (or level signal), the
following steps must be followed exactly:
1. Configure PMIC for backup mode, to change the role of
the accessory power switch from a power switch to a
wake-up switch,
@ -20,8 +22,10 @@ Description: Read/write the current state of DDR Backup Mode, which controls
3. Suspend system,
4. Switch accessory power switch on, to resume the
system.
DDR Backup Mode must be explicitly enabled by the user,
to invoke step 1.
See also Documentation/devicetree/bindings/mfd/bd9571mwv.txt.
Users: User space applications for embedded boards equipped with a
BD9571MWV PMIC.

11
Documentation/ABI/testing/sysfs-driver-genwqe
View File

@ -29,8 +29,12 @@ What: /sys/class/genwqe/genwqe<n>_card/reload_bitstream
Date: May 2014
Contact: klebers@linux.vnet.ibm.com
Description: Interface to trigger a PCIe card reset to reload the bitstream.
::
sudo sh -c 'echo 1 > \
/sys/class/genwqe/genwqe0_card/reload_bitstream'
If successfully, the card will come back with the bitstream set
on 'next_bitstream'.
@ -64,8 +68,11 @@ Description: Base clock frequency of the card.
What: /sys/class/genwqe/genwqe<n>_card/device/sriov_numvfs
Date: Oct 2013
Contact: haver@linux.vnet.ibm.com
Description: Enable VFs (1..15):
Description: Enable VFs (1..15)::
sudo sh -c 'echo 15 > \
/sys/bus/pci/devices/0000\:1b\:00.0/sriov_numvfs'
Disable VFs:
Disable VFs::
Write a 0 into the same sysfs entry.

18
Documentation/ABI/testing/sysfs-driver-hid-logitech-lg4ff
View File

@ -12,7 +12,9 @@ KernelVersion: 4.1
Contact: Michal Malý <madcatxster@devoid-pointer.net>
Description: Displays a set of alternate modes supported by a wheel. Each
mode is listed as follows:
Tag: Mode Name
Currently active mode is marked with an asterisk. List also
contains an abstract item "native" which always denotes the
native mode of the wheel. Echoing the mode tag switches the
@ -24,24 +26,30 @@ Description: Displays a set of alternate modes supported by a wheel. Each
This entry is not created for devices that have only one mode.
Currently supported mode switches:
Driving Force Pro:
Driving Force Pro::
DF-EX --> DFP
G25:
G25::
DF-EX --> DFP --> G25
G27:
G27::
DF-EX <*> DFP <-> G25 <-> G27
DF-EX <*--------> G25 <-> G27
DF-EX <*----------------> G27
G29:
G29::
DF-EX <*> DFP <-> G25 <-> G27 <-> G29
DF-EX <*--------> G25 <-> G27 <-> G29
DF-EX <*----------------> G27 <-> G29
DF-EX <*------------------------> G29
DFGT:
DFGT::
DF-EX <*> DFP <-> DFGT
DF-EX <*--------> DFGT

11
Documentation/ABI/testing/sysfs-driver-hid-wiimote
View File

@ -39,9 +39,13 @@ Description: While a device is initialized by the wiimote driver, we perform
Other strings for each device-type are available and may be
added if new device-specific detections are added.
Currently supported are:
gen10: First Wii Remote generation
gen20: Second Wii Remote Plus generation (builtin MP)
============= =======================================
gen10: First Wii Remote generation
gen20: Second Wii Remote Plus generation
(builtin MP)
balanceboard: Wii Balance Board
============= =======================================
What: /sys/bus/hid/drivers/wiimote/<dev>/bboard_calib
Date: May 2013
@ -54,6 +58,7 @@ Description: This attribute is only provided if the device was detected as a
First, 0kg values for all 4 sensors are written, followed by the
17kg values for all 4 sensors and last the 34kg values for all 4
sensors.
Calibration data is already applied by the kernel to all input
values but may be used by user-space to perform other
transformations.
@ -68,9 +73,11 @@ Description: This attribute is only provided if the device was detected as a
is prefixed with a +/-. Each value is a signed 16bit number.
Data is encoded as decimal numbers and specifies the offsets of
the analog sticks of the pro-controller.
Calibration data is already applied by the kernel to all input
values but may be used by user-space to perform other
transformations.
Calibration data is detected by the kernel during device setup.
You can write "scan\n" into this file to re-trigger calibration.
You can also write data directly in the form "x1:y1 x2:y2" to

13
Documentation/ABI/testing/sysfs-driver-samsung-laptop
View File

@ -9,10 +9,12 @@ Description: Some Samsung laptops have different "performance levels"
their fans quiet at all costs. Reading from this file
will show the current performance level. Writing to the
file can change this value.
Valid options:
"silent"
"normal"
"overclock"
- "silent"
- "normal"
- "overclock"
Note that not all laptops support all of these options.
Specifically, not all support the "overclock" option,
and it's still unknown if this value even changes
@ -25,8 +27,9 @@ Contact: Corentin Chary <corentin.chary@gmail.com>
Description: Max battery charge level can be modified, battery cycle
life can be extended by reducing the max battery charge
level.
0 means normal battery mode (100% charge)
1 means battery life extender mode (80% charge)
- 0 means normal battery mode (100% charge)
- 1 means battery life extender mode (80% charge)
What: /sys/devices/platform/samsung/usb_charge
Date: December 1, 2011

26
Documentation/ABI/testing/sysfs-driver-toshiba_acpi
View File

@ -4,10 +4,12 @@ KernelVersion: 3.15
Contact: Azael Avalos <coproscefalo@gmail.com>
Description: This file controls the keyboard backlight operation mode, valid
values are:
* 0x1 -> FN-Z
* 0x2 -> AUTO (also called TIMER)
* 0x8 -> ON
* 0x10 -> OFF
Note that from kernel 3.16 onwards this file accepts all listed
parameters, kernel 3.15 only accepts the first two (FN-Z and
AUTO).
@ -41,8 +43,10 @@ KernelVersion: 3.15
Contact: Azael Avalos <coproscefalo@gmail.com>
Description: This files controls the status of the touchpad and pointing
stick (if available), valid values are:
* 0 -> OFF
* 1 -> ON
Users: KToshiba
What: /sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS{1900,620{0,7,8}}:00/available_kbd_modes
@ -51,10 +55,12 @@ KernelVersion: 3.16
Contact: Azael Avalos <coproscefalo@gmail.com>
Description: This file shows the supported keyboard backlight modes
the system supports, which can be:
* 0x1 -> FN-Z
* 0x2 -> AUTO (also called TIMER)
* 0x8 -> ON
* 0x10 -> OFF
Note that not all keyboard types support the listed modes.
See the entry named "available_kbd_modes"
Users: KToshiba
@ -65,6 +71,7 @@ KernelVersion: 3.16
Contact: Azael Avalos <coproscefalo@gmail.com>
Description: This file shows the current keyboard backlight type,
which can be:
* 1 -> Type 1, supporting modes FN-Z and AUTO
* 2 -> Type 2, supporting modes TIMER, ON and OFF
Users: KToshiba
@ -75,10 +82,12 @@ KernelVersion: 4.0
Contact: Azael Avalos <coproscefalo@gmail.com>
Description: This file controls the USB Sleep & Charge charging mode, which
can be:
* 0 -> Disabled (0x00)
* 1 -> Alternate (0x09)
* 2 -> Auto (0x21)
* 3 -> Typical (0x11)
Note that from kernel 4.1 onwards this file accepts all listed
values, kernel 4.0 only supports the first three.
Note that this feature only works when connected to power, if
@ -93,8 +102,10 @@ Contact: Azael Avalos <coproscefalo@gmail.com>
Description: This file controls the USB Sleep Functions under battery, and
set the level at which point they will be disabled, accepted
values can be:
* 0 -> Disabled
* 1-100 -> Battery level to disable sleep functions
Currently it prints two values, the first one indicates if the
feature is enabled or disabled, while the second one shows the
current battery level set.
@ -107,8 +118,10 @@ Date: January 23, 2015
KernelVersion: 4.0
Contact: Azael Avalos <coproscefalo@gmail.com>
Description: This file controls the USB Rapid Charge state, which can be:
* 0 -> Disabled
* 1 -> Enabled
Note that toggling this value requires a reboot for changes to
take effect.
Users: KToshiba
@ -118,8 +131,10 @@ Date: January 23, 2015
KernelVersion: 4.0
Contact: Azael Avalos <coproscefalo@gmail.com>
Description: This file controls the Sleep & Music state, which values can be:
* 0 -> Disabled
* 1 -> Enabled
Note that this feature only works when connected to power, if
you want to use it under battery, see the entry named
"sleep_functions_on_battery"
@ -138,6 +153,7 @@ KernelVersion: 4.0
Contact: Azael Avalos <coproscefalo@gmail.com>
Description: This file controls the state of the internal fan, valid
values are:
* 0 -> OFF
* 1 -> ON
@ -147,8 +163,10 @@ KernelVersion: 4.0
Contact: Azael Avalos <coproscefalo@gmail.com>
Description: This file controls the Special Functions (hotkeys) operation
mode, valid values are:
* 0 -> Normal Operation
* 1 -> Special Functions
In the "Normal Operation" mode, the F{1-12} keys are as usual
and the hotkeys are accessed via FN-F{1-12}.
In the "Special Functions" mode, the F{1-12} keys trigger the
@ -163,8 +181,10 @@ KernelVersion: 4.0
Contact: Azael Avalos <coproscefalo@gmail.com>
Description: This file controls whether the laptop should turn ON whenever
the LID is opened, valid values are:
* 0 -> Disabled
* 1 -> Enabled
Note that toggling this value requires a reboot for changes to
take effect.
Users: KToshiba
@ -174,8 +194,10 @@ Date: February 12, 2015
KernelVersion: 4.0
Contact: Azael Avalos <coproscefalo@gmail.com>
Description: This file controls the USB 3 functionality, valid values are:
* 0 -> Disabled (Acts as a regular USB 2)
* 1 -> Enabled (Full USB 3 functionality)
Note that toggling this value requires a reboot for changes to
take effect.
Users: KToshiba
@ -188,10 +210,14 @@ Description: This file controls the Cooling Method feature.
Reading this file prints two values, the first is the actual cooling method
and the second is the maximum cooling method supported.
When the maximum cooling method is ONE, valid values are:
* 0 -> Maximum Performance
* 1 -> Battery Optimized
When the maximum cooling method is TWO, valid values are:
* 0 -> Maximum Performance
* 1 -> Performance
* 2 -> Battery Optimized
Users: KToshiba

2
Documentation/ABI/testing/sysfs-driver-toshiba_haps
View File

@ -4,10 +4,12 @@ KernelVersion: 3.17
Contact: Azael Avalos <coproscefalo@gmail.com>
Description: This file controls the built-in accelerometer protection level,
valid values are:
* 0 -> Disabled
* 1 -> Low
* 2 -> Medium
* 3 -> High
The default potection value is set to 2 (Medium).
Users: KToshiba

4
Documentation/ABI/testing/sysfs-driver-wacom
View File

@ -79,7 +79,9 @@ Description:
When the Wacom Intuos 4 is connected over Bluetooth, the
image has to contain 256 bytes (64x32 px 1 bit colour).
The format is also scrambled, like in the USB mode, and it can
be summarized by converting 76543210 into GECA6420.
be summarized by converting::
76543210 into GECA6420.
HGFEDCBA HFDB7531
What: /sys/bus/hid/devices/<bus>:<vid>:<pid>.<n>/wacom_remote/unpair_remote

205
Documentation/ABI/testing/sysfs-firmware-acpi
View File

@ -12,11 +12,14 @@ Description:
image: The image bitmap. Currently a 32-bit BMP.
status: 1 if the image is valid, 0 if firmware invalidated it.
type: 0 indicates image is in BMP format.
======== ===================================================
version: The version of the BGRT. Currently 1.
xoffset: The number of pixels between the left of the screen
and the left edge of the image.
yoffset: The number of pixels between the top of the screen
and the top edge of the image.
======== ===================================================
What: /sys/firmware/acpi/hotplug/
Date: February 2013
@ -33,12 +36,14 @@ Description:
The following setting is available to user space for each
hotplug profile:
======== =======================================================
enabled: If set, the ACPI core will handle notifications of
hotplug events associated with the given class of
devices and will allow those devices to be ejected with
the help of the _EJ0 control method. Unsetting it
effectively disables hotplug for the correspoinding
class of devices.
hotplug events associated with the given class of
devices and will allow those devices to be ejected with
the help of the _EJ0 control method. Unsetting it
effectively disables hotplug for the correspoinding
class of devices.
======== =======================================================
The value of the above attribute is an integer number: 1 (set)
or 0 (unset). Attempts to write any other values to it will
@ -71,86 +76,90 @@ Description:
To figure out where all the SCI's are coming from,
/sys/firmware/acpi/interrupts contains a file listing
every possible source, and the count of how many
times it has triggered.
times it has triggered::
$ cd /sys/firmware/acpi/interrupts
$ grep . *
error: 0
ff_gbl_lock: 0 enable
ff_pmtimer: 0 invalid
ff_pwr_btn: 0 enable
ff_rt_clk: 2 disable
ff_slp_btn: 0 invalid
gpe00: 0 invalid
gpe01: 0 enable
gpe02: 108 enable
gpe03: 0 invalid
gpe04: 0 invalid
gpe05: 0 invalid
gpe06: 0 enable
gpe07: 0 enable
gpe08: 0 invalid
gpe09: 0 invalid
gpe0A: 0 invalid
gpe0B: 0 invalid
gpe0C: 0 invalid
gpe0D: 0 invalid
gpe0E: 0 invalid
gpe0F: 0 invalid
gpe10: 0 invalid
gpe11: 0 invalid
gpe12: 0 invalid
gpe13: 0 invalid
gpe14: 0 invalid
gpe15: 0 invalid
gpe16: 0 invalid
gpe17: 1084 enable
gpe18: 0 enable
gpe19: 0 invalid
gpe1A: 0 invalid
gpe1B: 0 invalid
gpe1C: 0 invalid
gpe1D: 0 invalid
gpe1E: 0 invalid
gpe1F: 0 invalid
gpe_all: 1192
sci: 1194
sci_not: 0
$ cd /sys/firmware/acpi/interrupts
$ grep . *
error: 0
ff_gbl_lock: 0 enable
ff_pmtimer: 0 invalid
ff_pwr_btn: 0 enable
ff_rt_clk: 2 disable
ff_slp_btn: 0 invalid
gpe00: 0 invalid
gpe01: 0 enable
gpe02: 108 enable
gpe03: 0 invalid
gpe04: 0 invalid
gpe05: 0 invalid
gpe06: 0 enable
gpe07: 0 enable
gpe08: 0 invalid
gpe09: 0 invalid
gpe0A: 0 invalid
gpe0B: 0 invalid
gpe0C: 0 invalid
gpe0D: 0 invalid
gpe0E: 0 invalid
gpe0F: 0 invalid
gpe10: 0 invalid
gpe11: 0 invalid
gpe12: 0 invalid
gpe13: 0 invalid
gpe14: 0 invalid
gpe15: 0 invalid
gpe16: 0 invalid
gpe17: 1084 enable
gpe18: 0 enable
gpe19: 0 invalid
gpe1A: 0 invalid
gpe1B: 0 invalid
gpe1C: 0 invalid
gpe1D: 0 invalid
gpe1E: 0 invalid
gpe1F: 0 invalid
gpe_all: 1192
sci: 1194
sci_not: 0
sci - The number of times the ACPI SCI
has been called and claimed an interrupt.
=========== ==================================================
sci The number of times the ACPI SCI
has been called and claimed an interrupt.
sci_not - The number of times the ACPI SCI
has been called and NOT claimed an interrupt.
sci_not The number of times the ACPI SCI
has been called and NOT claimed an interrupt.
gpe_all - count of SCI caused by GPEs.
gpe_all count of SCI caused by GPEs.
gpeXX - count for individual GPE source
gpeXX count for individual GPE source
ff_gbl_lock - Global Lock
ff_gbl_lock Global Lock
ff_pmtimer - PM Timer
ff_pmtimer PM Timer
ff_pwr_btn - Power Button
ff_pwr_btn Power Button
ff_rt_clk - Real Time Clock
ff_rt_clk Real Time Clock
ff_slp_btn - Sleep Button
ff_slp_btn Sleep Button
error - an interrupt that can't be accounted for above.
error an interrupt that can't be accounted for above.
invalid: it's either a GPE or a Fixed Event that
doesn't have an event handler.
invalid it's either a GPE or a Fixed Event that
doesn't have an event handler.
disable: the GPE/Fixed Event is valid but disabled.
disable the GPE/Fixed Event is valid but disabled.
enable: the GPE/Fixed Event is valid and enabled.
enable the GPE/Fixed Event is valid and enabled.
=========== ==================================================
Root has permission to clear any of these counters. Eg.
# echo 0 > gpe11
Root has permission to clear any of these counters. Eg.::
All counters can be cleared by clearing the total "sci":
# echo 0 > sci
# echo 0 > gpe11
All counters can be cleared by clearing the total "sci"::
# echo 0 > sci
None of these counters has an effect on the function
of the system, they are simply statistics.
@ -165,32 +174,34 @@ Description:
Let's take power button fixed event for example, please kill acpid
and other user space applications so that the machine won't shutdown
when pressing the power button.
# cat ff_pwr_btn
0 enabled
# press the power button for 3 times;
# cat ff_pwr_btn
3 enabled
# echo disable > ff_pwr_btn
# cat ff_pwr_btn
3 disabled
# press the power button for 3 times;
# cat ff_pwr_btn
3 disabled
# echo enable > ff_pwr_btn
# cat ff_pwr_btn
4 enabled
/*
* this is because the status bit is set even if the enable bit is cleared,
* and it triggers an ACPI fixed event when the enable bit is set again
*/
# press the power button for 3 times;
# cat ff_pwr_btn
7 enabled
# echo disable > ff_pwr_btn
# press the power button for 3 times;
# echo clear > ff_pwr_btn /* clear the status bit */
# echo disable > ff_pwr_btn
# cat ff_pwr_btn
7 enabled
when pressing the power button::
# cat ff_pwr_btn
0 enabled
# press the power button for 3 times;
# cat ff_pwr_btn
3 enabled
# echo disable > ff_pwr_btn
# cat ff_pwr_btn
3 disabled
# press the power button for 3 times;
# cat ff_pwr_btn
3 disabled
# echo enable > ff_pwr_btn
# cat ff_pwr_btn
4 enabled
/*
* this is because the status bit is set even if the enable
* bit is cleared, and it triggers an ACPI fixed event when
* the enable bit is set again
*/
# press the power button for 3 times;
# cat ff_pwr_btn
7 enabled
# echo disable > ff_pwr_btn
# press the power button for 3 times;
# echo clear > ff_pwr_btn /* clear the status bit */
# echo disable > ff_pwr_btn
# cat ff_pwr_btn
7 enabled

50
Documentation/ABI/testing/sysfs-firmware-dmi-entries
View File

@ -33,7 +33,7 @@ Description:
doesn't matter), they will be represented in sysfs as
entries "T-0" through "T-(N-1)":
Example entry directories:
Example entry directories::
/sys/firmware/dmi/entries/17-0
/sys/firmware/dmi/entries/17-1
@ -50,61 +50,65 @@ Description:
Each DMI entry in sysfs has the common header values
exported as attributes:
handle : The 16bit 'handle' that is assigned to this
======== =================================================
handle The 16bit 'handle' that is assigned to this
entry by the firmware. This handle may be
referred to by other entries.
length : The length of the entry, as presented in the
length The length of the entry, as presented in the
entry itself. Note that this is _not the
total count of bytes associated with the
entry_. This value represents the length of
entry. This value represents the length of
the "formatted" portion of the entry. This
"formatted" region is sometimes followed by
the "unformatted" region composed of nul
terminated strings, with termination signalled
by a two nul characters in series.
raw : The raw bytes of the entry. This includes the
raw The raw bytes of the entry. This includes the
"formatted" portion of the entry, the
"unformatted" strings portion of the entry,
and the two terminating nul characters.
type : The type of the entry. This value is the same
type The type of the entry. This value is the same
as found in the directory name. It indicates
how the rest of the entry should be interpreted.
instance: The instance ordinal of the entry for the
instance The instance ordinal of the entry for the
given type. This value is the same as found
in the parent directory name.
position: The ordinal position (zero-based) of the entry
position The ordinal position (zero-based) of the entry
within the entirety of the DMI entry table.
======== =================================================
=== Entry Specialization ===
**Entry Specialization**
Some entry types may have other information available in
sysfs. Not all types are specialized.
--- Type 15 - System Event Log ---
**Type 15 - System Event Log**
This entry allows the firmware to export a log of
events the system has taken. This information is
typically backed by nvram, but the implementation
details are abstracted by this table. This entry's data
is exported in the directory:
is exported in the directory::
/sys/firmware/dmi/entries/15-0/system_event_log
/sys/firmware/dmi/entries/15-0/system_event_log
and has the following attributes (documented in the
SMBIOS / DMI specification under "System Event Log (Type 15)":
area_length
header_start_offset
data_start_offset
access_method
status
change_token
access_method_address
header_format
per_log_type_descriptor_length
type_descriptors_supported_count
- area_length
- header_start_offset
- data_start_offset
- access_method
- status
- change_token
- access_method_address
- header_format
- per_log_type_descriptor_length
- type_descriptors_supported_count
As well, the kernel exports the binary attribute:
raw_event_log : The raw binary bits of the event log
============= ====================================
raw_event_log The raw binary bits of the event log
as described by the DMI entry.
============= ====================================

2
Documentation/ABI/testing/sysfs-firmware-gsmi
View File

@ -20,7 +20,7 @@ Description:
This directory has the same layout (and
underlying implementation as /sys/firmware/efi/vars.
See Documentation/ABI/*/sysfs-firmware-efi-vars
See `Documentation/ABI/*/sysfs-firmware-efi-vars`
for more information on how to interact with
this structure.

16
Documentation/ABI/testing/sysfs-firmware-memmap
View File

@ -20,7 +20,7 @@ Description:
the raw memory map to userspace.
The structure is as follows: Under /sys/firmware/memmap there
are subdirectories with the number of the entry as their name:
are subdirectories with the number of the entry as their name::
/sys/firmware/memmap/0
/sys/firmware/memmap/1
@ -34,14 +34,16 @@ Description:
Each directory contains three files:
start : The start address (as hexadecimal number with the
======== =====================================================
start The start address (as hexadecimal number with the
'0x' prefix).
end : The end address, inclusive (regardless whether the
end The end address, inclusive (regardless whether the
firmware provides inclusive or exclusive ranges).
type : Type of the entry as string. See below for a list of
type Type of the entry as string. See below for a list of
valid types.
======== =====================================================
So, for example:
So, for example::
/sys/firmware/memmap/0/start
/sys/firmware/memmap/0/end
@ -57,9 +59,8 @@ Description:
- reserved
Following shell snippet can be used to display that memory
map in a human-readable format:
map in a human-readable format::
-------------------- 8< ----------------------------------------
#!/bin/bash
cd /sys/firmware/memmap
for dir in * ; do
@ -68,4 +69,3 @@ Description:
type=$(cat $dir/type)
printf "%016x-%016x (%s)\n" $start $[ $end +1] "$type"
done
-------------------- >8 ----------------------------------------

4
Documentation/ABI/testing/sysfs-fs-ext4
View File

@ -45,8 +45,8 @@ Description:
parameter will have their blocks allocated out of a
block group specific preallocation pool, so that small
files are packed closely together. Each large file
will have its blocks allocated out of its own unique
preallocation pool.
will have its blocks allocated out of its own unique
preallocation pool.
What: /sys/fs/ext4/<disk>/inode_readahead_blks
Date: March 2008

13
Documentation/ABI/testing/sysfs-hypervisor-xen
View File

@ -15,14 +15,17 @@ KernelVersion: 4.3
Contact: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Description: If running under Xen:
Describes mode that Xen's performance-monitoring unit (PMU)
uses. Accepted values are
"off" -- PMU is disabled
"self" -- The guest can profile itself
"hv" -- The guest can profile itself and, if it is
uses. Accepted values are:
====== ============================================
"off" PMU is disabled
"self" The guest can profile itself
"hv" The guest can profile itself and, if it is
privileged (e.g. dom0), the hypervisor
"all" -- The guest can profile itself, the hypervisor
"all" The guest can profile itself, the hypervisor
and all other guests. Only available to
privileged guests.
====== ============================================
What: /sys/hypervisor/pmu/pmu_features
Date: August 2015

23
Documentation/ABI/testing/sysfs-kernel-boot_params
View File

@ -23,16 +23,17 @@ Description: The /sys/kernel/boot_params directory contains two
representation of setup_data type. "data" file is the binary
representation of setup_data payload.
The whole boot_params directory structure is like below:
/sys/kernel/boot_params
|__ data
|__ setup_data
| |__ 0
| | |__ data
| | |__ type
| |__ 1
| |__ data
| |__ type
|__ version
The whole boot_params directory structure is like below::
/sys/kernel/boot_params
|__ data
|__ setup_data
| |__ 0
| | |__ data
| | |__ type
| |__ 1
| |__ data
| |__ type
|__ version
Users: Kexec

12
Documentation/ABI/testing/sysfs-kernel-mm-hugepages
View File

@ -7,9 +7,11 @@ Description:
of the hugepages supported by the kernel/CPU combination.
Under these directories are a number of files:
nr_hugepages
nr_overcommit_hugepages
free_hugepages
surplus_hugepages
resv_hugepages
- nr_hugepages
- nr_overcommit_hugepages
- free_hugepages
- surplus_hugepages
- resv_hugepages
See Documentation/admin-guide/mm/hugetlbpage.rst for details.

21
Documentation/ABI/testing/sysfs-platform-asus-laptop
View File

@ -4,13 +4,16 @@ KernelVersion: 2.6.20
Contact: "Corentin Chary" <corentincj@iksaif.net>
Description:
This file allows display switching. The value
is composed by 4 bits and defined as follow:
4321
|||`- LCD
||`-- CRT
|`--- TV
`---- DVI
Ex: - 0 (0000b) means no display
is composed by 4 bits and defined as follow::
4321
|||`- LCD
||`-- CRT
|`--- TV
`---- DVI
Ex:
- 0 (0000b) means no display
- 3 (0011b) CRT+LCD.
What: /sys/devices/platform/asus_laptop/gps
@ -28,8 +31,10 @@ Contact: "Corentin Chary" <corentincj@iksaif.net>
Description:
Some models like the W1N have a LED display that can be
used to display several items of information.
To control the LED display, use the following :
To control the LED display, use the following::
echo 0x0T000DDD > /sys/devices/platform/asus_laptop/
where T control the 3 letters display, and DDD the 3 digits display.
The DDD table can be found in Documentation/admin-guide/laptops/asus-laptop.rst

1
Documentation/ABI/testing/sysfs-platform-asus-wmi
View File

@ -5,6 +5,7 @@ Contact: "Corentin Chary" <corentincj@iksaif.net>
Description:
Change CPU clock configuration (write-only).
There are three available clock configuration:
* 0 -> Super Performance Mode
* 1 -> High Performance Mode
* 2 -> Power Saving Mode

10
Documentation/ABI/testing/sysfs-platform-at91
View File

@ -18,8 +18,10 @@ Description:
In order to use an extended can_id add the
CAN_EFF_FLAG (0x80000000U) to the can_id. Example:
- standard id 0x7ff:
echo 0x7ff > /sys/class/net/can0/mb0_id
- standard id 0x7ff::
- extended id 0x1fffffff:
echo 0x9fffffff > /sys/class/net/can0/mb0_id
echo 0x7ff > /sys/class/net/can0/mb0_id
- extended id 0x1fffffff::
echo 0x9fffffff > /sys/class/net/can0/mb0_id

14
Documentation/ABI/testing/sysfs-platform-eeepc-laptop
View File

@ -4,9 +4,11 @@ KernelVersion: 2.6.26
Contact: "Corentin Chary" <corentincj@iksaif.net>
Description:
This file allows display switching.
- 1 = LCD
- 2 = CRT
- 3 = LCD+CRT
If you run X11, you should use xrandr instead.
What: /sys/devices/platform/eeepc/camera
@ -30,16 +32,20 @@ Contact: "Corentin Chary" <corentincj@iksaif.net>
Description:
Change CPU clock configuration.
On the Eee PC 1000H there are three available clock configuration:
* 0 -> Super Performance Mode
* 1 -> High Performance Mode
* 2 -> Power Saving Mode
On Eee PC 701 there is only 2 available clock configurations.
Available configuration are listed in available_cpufv file.
Reading this file will show the raw hexadecimal value which
is defined as follow:
| 8 bit | 8 bit |
| `---- Current mode
`------------ Availables modes
is defined as follow::
| 8 bit | 8 bit |
| `---- Current mode
`------------ Availables modes
For example, 0x301 means: mode 1 selected, 3 available modes.
What: /sys/devices/platform/eeepc/available_cpufv

9
Documentation/ABI/testing/sysfs-platform-ideapad-laptop
View File

@ -12,6 +12,7 @@ Contact: "Maxim Mikityanskiy <maxtram95@gmail.com>"
Description:
Change fan mode
There are four available modes:
* 0 -> Super Silent Mode
* 1 -> Standard Mode
* 2 -> Dust Cleaning
@ -32,9 +33,11 @@ KernelVersion: 4.18
Contact: "Oleg Keri <ezhi99@gmail.com>"
Description:
Control fn-lock mode.
* 1 -> Switched On
* 0 -> Switched Off
For example:
# echo "0" > \
/sys/bus/pci/devices/0000:00:1f.0/PNP0C09:00/VPC2004:00/fn_lock
For example::
# echo "0" > \
/sys/bus/pci/devices/0000:00:1f.0/PNP0C09:00/VPC2004:00/fn_lock

1
Documentation/ABI/testing/sysfs-platform-intel-wmi-thunderbolt
View File

@ -7,5 +7,6 @@ Description:
Thunderbolt controllers to turn on or off when no
devices are connected (write-only)
There are two available states:
* 0 -> Force power disabled
* 1 -> Force power enabled

13
Documentation/ABI/testing/sysfs-platform-sst-atom
View File

@ -5,13 +5,22 @@ Contact: "Sebastien Guiriec" <sebastien.guiriec@intel.com>
Description:
LPE Firmware version for SST driver on all atom
plaforms (BYT/CHT/Merrifield/BSW).
If the FW has never been loaded it will display:
If the FW has never been loaded it will display::
"FW not yet loaded"
If FW has been loaded it will display:
If FW has been loaded it will display::
"v01.aa.bb.cc"
aa: Major version is reflecting SoC version:
=== =============
0d: BYT FW
0b: BSW FW
07: Merrifield FW
=== =============
bb: Minor version
cc: Build version

11
Documentation/ABI/testing/sysfs-platform-usbip-vudc
View File

@ -16,10 +16,13 @@ Contact: Krzysztof Opasiak <k.opasiak@samsung.com>
Description:
Current status of the device.
Allowed values:
1 - Device is available and can be exported
2 - Device is currently exported
3 - Fatal error occurred during communication
with peer
== ==========================================
1 Device is available and can be exported
2 Device is currently exported
3 Fatal error occurred during communication
with peer
== ==========================================
What: /sys/devices/platform/usbip-vudc.%d/usbip_sockfd
Date: April 2016

2
Documentation/ABI/testing/sysfs-ptp
View File

@ -69,7 +69,7 @@ Description:
pin offered by the PTP hardware clock. The file name
is the hardware dependent pin name. Reading from this
file produces two numbers, the assigned function (see
the PTP_PF_ enumeration values in linux/ptp_clock.h)
the `PTP_PF_` enumeration values in linux/ptp_clock.h)
and the channel number. The function and channel
assignment may be changed by two writing numbers into
the file.