mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-11 12:28:41 +08:00
dt-bindings: pinctrl: mt8186: add pinctrl file and binding document
1. This patch adds pinctrl file for mt8186. 2. This patch adds mt8186 compatible node in binding document. Signed-off-by: Guodong Liu <guodong.liu@mediatek.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220216032124.28067-2-guodong.liu@mediatek.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This commit is contained in:
Guodong Liu
Linus Walleij
parent
f54d626698
commit
338e953f1b
297
Documentation/devicetree/bindings/pinctrl/pinctrl-mt8186.yaml
Normal file
297
Documentation/devicetree/bindings/pinctrl/pinctrl-mt8186.yaml
Normal file
@ -0,0 +1,297 @@
|
||||
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/pinctrl/pinctrl-mt8186.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Mediatek MT8186 Pin Controller
|
||||
|
||||
maintainers:
|
||||
- Sean Wang <sean.wang@mediatek.com>
|
||||
|
||||
description: |
|
||||
The Mediatek's Pin controller is used to control SoC pins.
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
const: mediatek,mt8186-pinctrl
|
||||
|
||||
gpio-controller: true
|
||||
|
||||
'#gpio-cells':
|
||||
description: |
|
||||
Number of cells in GPIO specifier. Since the generic GPIO binding is used,
|
||||
the amount of cells must be specified as 2. See the below
|
||||
mentioned gpio binding representation for description of particular cells.
|
||||
const: 2
|
||||
|
||||
gpio-ranges:
|
||||
maxItems: 1
|
||||
|
||||
reg:
|
||||
description: |
|
||||
Physical address base for gpio base registers. There are 8 different GPIO
|
||||
physical address base in mt8186.
|
||||
maxItems: 8
|
||||
|
||||
reg-names:
|
||||
description: |
|
||||
Gpio base register names.
|
||||
items:
|
||||
- const: iocfg0
|
||||
- const: iocfg_bm
|
||||
- const: iocfg_bl
|
||||
- const: iocfg_br
|
||||
- const: iocfg_lm
|
||||
- const: iocfg_rb
|
||||
- const: iocfg_tl
|
||||
- const: eint
|
||||
|
||||
interrupt-controller: true
|
||||
|
||||
'#interrupt-cells':
|
||||
const: 2
|
||||
|
||||
interrupts:
|
||||
description: The interrupt outputs to sysirq
|
||||
maxItems: 1
|
||||
|
||||
mediatek,rsel-resistance-in-si-unit:
|
||||
type: boolean
|
||||
description: |
|
||||
Identifying i2c pins pull up/down type which is RSEL. It can support
|
||||
RSEL define or si unit value(ohm) to set different resistance.
|
||||
|
||||
# PIN CONFIGURATION NODES
|
||||
patternProperties:
|
||||
'-pins$':
|
||||
type: object
|
||||
additionalProperties: false
|
||||
patternProperties:
|
||||
'^pins':
|
||||
type: object
|
||||
additionalProperties: false
|
||||
description: |
|
||||
A pinctrl node should contain at least one subnodes representing the
|
||||
pinctrl groups available on the machine. Each subnode will list the
|
||||
pins it needs, and how they should be configured, with regard to muxer
|
||||
configuration, pullups, drive strength, input enable/disable and
|
||||
input schmitt.
|
||||
An example of using macro:
|
||||
pincontroller {
|
||||
/* GPIO0 set as multifunction GPIO0 */
|
||||
gpio-pins {
|
||||
pins {
|
||||
pinmux = <PINMUX_GPIO0__FUNC_GPIO0>;
|
||||
}
|
||||
};
|
||||
/* GPIO128 set as multifunction SDA0 */
|
||||
i2c0-pins {
|
||||
pins {
|
||||
pinmux = <PINMUX_GPIO128__FUNC_SDA0>;
|
||||
}
|
||||
};
|
||||
};
|
||||
$ref: "pinmux-node.yaml"
|
||||
|
||||
properties:
|
||||
pinmux:
|
||||
description: |
|
||||
Integer array, represents gpio pin number and mux setting.
|
||||
Supported pin number and mux varies for different SoCs, and are
|
||||
defined as macros in dt-bindings/pinctrl/<soc>-pinfunc.h
|
||||
directly.
|
||||
|
||||
drive-strength:
|
||||
enum: [2, 4, 6, 8, 10, 12, 14, 16]
|
||||
|
||||
mediatek,drive-strength-adv:
|
||||
description: |
|
||||
Describe the specific driving setup property.
|
||||
For I2C pins, the existing generic driving setup can only support
|
||||
2/4/6/8/10/12/14/16mA driving. But in specific driving setup, they
|
||||
can support 0.125/0.25/0.5/1mA adjustment. If we enable specific
|
||||
driving setup, the existing generic setup will be disabled.
|
||||
The specific driving setup is controlled by E1E0EN.
|
||||
When E1=0/E0=0, the strength is 0.125mA.
|
||||
When E1=0/E0=1, the strength is 0.25mA.
|
||||
When E1=1/E0=0, the strength is 0.5mA.
|
||||
When E1=1/E0=1, the strength is 1mA.
|
||||
EN is used to enable or disable the specific driving setup.
|
||||
Valid arguments are described as below:
|
||||
0: (E1, E0, EN) = (0, 0, 0)
|
||||
1: (E1, E0, EN) = (0, 0, 1)
|
||||
2: (E1, E0, EN) = (0, 1, 0)
|
||||
3: (E1, E0, EN) = (0, 1, 1)
|
||||
4: (E1, E0, EN) = (1, 0, 0)
|
||||
5: (E1, E0, EN) = (1, 0, 1)
|
||||
6: (E1, E0, EN) = (1, 1, 0)
|
||||
7: (E1, E0, EN) = (1, 1, 1)
|
||||
So the valid arguments are from 0 to 7.
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
enum: [0, 1, 2, 3, 4, 5, 6, 7]
|
||||
|
||||
bias-pull-down:
|
||||
oneOf:
|
||||
- type: boolean
|
||||
- enum: [100, 101, 102, 103]
|
||||
description: mt8186 pull down PUPD/R0/R1 type define value.
|
||||
- enum: [200, 201, 202, 203]
|
||||
description: mt8186 pull down RSEL type define value.
|
||||
- enum: [75000, 5000]
|
||||
description: mt8186 pull down RSEL type si unit value(ohm).
|
||||
description: |
|
||||
For pull down type is normal, it don't need add RSEL & R1R0 define
|
||||
and resistance value.
|
||||
For pull down type is PUPD/R0/R1 type, it can add R1R0 define to
|
||||
set different resistance. It can support "MTK_PUPD_SET_R1R0_00" &
|
||||
"MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" &
|
||||
"MTK_PUPD_SET_R1R0_11" define in mt8186.
|
||||
For pull down type is RSEL, it can add RSEL define & resistance
|
||||
value(ohm) to set different resistance by identifying property
|
||||
"mediatek,rsel-resistance-in-si-unit".
|
||||
It can support "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001"
|
||||
& "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011"
|
||||
define in mt8186. It can also support resistance value(ohm)
|
||||
"75000" & "5000" in mt8186.
|
||||
An example of using RSEL define:
|
||||
pincontroller {
|
||||
i2c0_pin {
|
||||
pins {
|
||||
pinmux = <PINMUX_GPIO128__FUNC_SDA0>;
|
||||
bias-pull-down = <MTK_PULL_SET_RSEL_001>;
|
||||
}
|
||||
};
|
||||
};
|
||||
An example of using si unit resistance value(ohm):
|
||||
&pio {
|
||||
mediatek,rsel-resistance-in-si-unit;
|
||||
}
|
||||
pincontroller {
|
||||
i2c0_pin {
|
||||
pins {
|
||||
pinmux = <PINMUX_GPIO128__FUNC_SDA0>;
|
||||
bias-pull-down = <75000>;
|
||||
}
|
||||
};
|
||||
};
|
||||
|
||||
bias-pull-up:
|
||||
oneOf:
|
||||
- type: boolean
|
||||
- enum: [100, 101, 102, 103]
|
||||
description: mt8186 pull up PUPD/R0/R1 type define value.
|
||||
- enum: [200, 201, 202, 203]
|
||||
description: mt8186 pull up RSEL type define value.
|
||||
- enum: [1000, 5000, 10000, 75000]
|
||||
description: mt8186 pull up RSEL type si unit value(ohm).
|
||||
description: |
|
||||
For pull up type is normal, it don't need add RSEL & R1R0 define
|
||||
and resistance value.
|
||||
For pull up type is PUPD/R0/R1 type, it can add R1R0 define to
|
||||
set different resistance. It can support "MTK_PUPD_SET_R1R0_00" &
|
||||
"MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" &
|
||||
"MTK_PUPD_SET_R1R0_11" define in mt8186.
|
||||
For pull up type is RSEL, it can add RSEL define & resistance
|
||||
value(ohm) to set different resistance by identifying property
|
||||
"mediatek,rsel-resistance-in-si-unit".
|
||||
It can support "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001"
|
||||
& "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011"
|
||||
define in mt8186. It can also support resistance value(ohm)
|
||||
"1000" & "5000" & "10000" & "75000" in mt8186.
|
||||
An example of using si unit resistance value(ohm):
|
||||
&pio {
|
||||
mediatek,rsel-resistance-in-si-unit;
|
||||
}
|
||||
pincontroller {
|
||||
i2c0-pins {
|
||||
pins {
|
||||
pinmux = <PINMUX_GPIO128__FUNC_SDA0>;
|
||||
bias-pull-up = <1000>;
|
||||
}
|
||||
};
|
||||
};
|
||||
|
||||
bias-disable: true
|
||||
|
||||
output-high: true
|
||||
|
||||
output-low: true
|
||||
|
||||
input-enable: true
|
||||
|
||||
input-disable: true
|
||||
|
||||
input-schmitt-enable: true
|
||||
|
||||
input-schmitt-disable: true
|
||||
|
||||
required:
|
||||
- pinmux
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- interrupts
|
||||
- interrupt-controller
|
||||
- '#interrupt-cells'
|
||||
- gpio-controller
|
||||
- '#gpio-cells'
|
||||
- gpio-ranges
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/pinctrl/mt8186-pinfunc.h>
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
|
||||
pio: pinctrl@10005000 {
|
||||
compatible = "mediatek,mt8186-pinctrl";
|
||||
reg = <0x10005000 0x1000>,
|
||||
<0x10002000 0x0200>,
|
||||
<0x10002200 0x0200>,
|
||||
<0x10002400 0x0200>,
|
||||
<0x10002600 0x0200>,
|
||||
<0x10002A00 0x0200>,
|
||||
<0x10002c00 0x0200>,
|
||||
<0x1000b000 0x1000>;
|
||||
reg-names = "iocfg0", "iocfg_bm", "iocfg_bl",
|
||||
"iocfg_br", "iocfg_lm", "iocfg_rb",
|
||||
"iocfg_tl", "eint";
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
gpio-ranges = <&pio 0 0 185>;
|
||||
interrupt-controller;
|
||||
interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH 0>;
|
||||
#interrupt-cells = <2>;
|
||||
|
||||
pio-pins {
|
||||
pins {
|
||||
pinmux = <PINMUX_GPIO0__FUNC_GPIO0>;
|
||||
output-low;
|
||||
};
|
||||
};
|
||||
|
||||
spi0-pins {
|
||||
pins-spi {
|
||||
pinmux = <PINMUX_GPIO0__FUNC_SPI0_CLK_B>,
|
||||
<PINMUX_GPIO1__FUNC_SPI0_CSB_B>,
|
||||
<PINMUX_GPIO2__FUNC_SPI0_MO_B>;
|
||||
bias-disable;
|
||||
};
|
||||
pins-spi-mi {
|
||||
pinmux = <PINMUX_GPIO3__FUNC_SPI0_MI_B>;
|
||||
bias-pull-down;
|
||||
};
|
||||
};
|
||||
|
||||
i2c0-pins {
|
||||
pins {
|
||||
pinmux = <PINMUX_GPIO127__FUNC_SCL0>,
|
||||
<PINMUX_GPIO128__FUNC_SDA0>;
|
||||
bias-pull-up = <MTK_PULL_SET_RSEL_001>;
|
||||
mediatek,drive-strength-adv = <7>;
|
||||
};
|
||||
};
|
||||
};
|
||||
1174
include/dt-bindings/pinctrl/mt8186-pinfunc.h
Normal file
1174
include/dt-bindings/pinctrl/mt8186-pinfunc.h
Normal file
File diff suppressed because it is too large
Load Diff
Loading…
Reference in New Issue
Block a user