PHY: Ingenic: Add USB PHY driver using generic PHY framework.

Used the generic PHY framework API to create the PHY, this driver
supoorts USB OTG PHY used in JZ4770 SoC, JZ4775 SoC, JZ4780 SoC,
X1000 SoC, X1830 SoC and X2000 SoC.

Co-developed-by: 漆鹏振 (Qi Pengzhen) <aric.pzqi@ingenic.com>
Signed-off-by: 漆鹏振 (Qi Pengzhen) <aric.pzqi@ingenic.com>
Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Tested-by: 周正 (Zhou Zheng) <sernia.zhou@foxmail.com>
Tested-by: H. Nikolaus Schaller <hns@goldelico.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20201116141906.11758-4-zhouyanjie@wanyeetech.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This commit is contained in:
周琰杰 (Zhou Yanjie) 2020-11-16 22:19:06 +08:00 committed by Vinod Koul
parent 4f6ecfaf3e
commit 31de313dfd
5 changed files with 428 additions and 0 deletions

View File

@ -66,6 +66,7 @@ source "drivers/phy/broadcom/Kconfig"
source "drivers/phy/cadence/Kconfig"
source "drivers/phy/freescale/Kconfig"
source "drivers/phy/hisilicon/Kconfig"
source "drivers/phy/ingenic/Kconfig"
source "drivers/phy/lantiq/Kconfig"
source "drivers/phy/marvell/Kconfig"
source "drivers/phy/mediatek/Kconfig"

View File

@ -15,6 +15,7 @@ obj-y += allwinner/ \
cadence/ \
freescale/ \
hisilicon/ \
ingenic/ \
intel/ \
lantiq/ \
marvell/ \

View File

@ -0,0 +1,12 @@
# SPDX-License-Identifier: GPL-2.0
#
# Phy drivers for Ingenic platforms
#
config PHY_INGENIC_USB
tristate "Ingenic SoCs USB PHY Driver"
depends on MIPS || COMPILE_TEST
depends on USB_SUPPORT
select GENERIC_PHY
help
This driver provides USB PHY support for the USB controller found
on the JZ-series and X-series SoCs from Ingenic.

View File

@ -0,0 +1,2 @@
# SPDX-License-Identifier: GPL-2.0
obj-y += phy-ingenic-usb.o

View File

@ -0,0 +1,412 @@
// SPDX-License-Identifier: GPL-2.0
/*
* Ingenic SoCs USB PHY driver
* Copyright (c) Paul Cercueil <paul@crapouillou.net>
* Copyright (c) (Qi Pengzhen) <aric.pzqi@ingenic.com>
* Copyright (c) (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
*/
#include <linux/bitfield.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
/* OTGPHY register offsets */
#define REG_USBPCR_OFFSET 0x00
#define REG_USBRDT_OFFSET 0x04
#define REG_USBVBFIL_OFFSET 0x08
#define REG_USBPCR1_OFFSET 0x0c
/* bits within the USBPCR register */
#define USBPCR_USB_MODE BIT(31)
#define USBPCR_AVLD_REG BIT(30)
#define USBPCR_COMMONONN BIT(25)
#define USBPCR_VBUSVLDEXT BIT(24)
#define USBPCR_VBUSVLDEXTSEL BIT(23)
#define USBPCR_POR BIT(22)
#define USBPCR_SIDDQ BIT(21)
#define USBPCR_OTG_DISABLE BIT(20)
#define USBPCR_TXPREEMPHTUNE BIT(6)
#define USBPCR_IDPULLUP_MASK GENMASK(29, 28)
#define USBPCR_IDPULLUP_ALWAYS 0x2
#define USBPCR_IDPULLUP_SUSPEND 0x1
#define USBPCR_IDPULLUP_OTG 0x0
#define USBPCR_COMPDISTUNE_MASK GENMASK(19, 17)
#define USBPCR_COMPDISTUNE_DFT 0x4
#define USBPCR_OTGTUNE_MASK GENMASK(16, 14)
#define USBPCR_OTGTUNE_DFT 0x4
#define USBPCR_SQRXTUNE_MASK GENMASK(13, 11)
#define USBPCR_SQRXTUNE_DCR_20PCT 0x7
#define USBPCR_SQRXTUNE_DFT 0x3
#define USBPCR_TXFSLSTUNE_MASK GENMASK(10, 7)
#define USBPCR_TXFSLSTUNE_DCR_50PPT 0xf
#define USBPCR_TXFSLSTUNE_DCR_25PPT 0x7
#define USBPCR_TXFSLSTUNE_DFT 0x3
#define USBPCR_TXFSLSTUNE_INC_25PPT 0x1
#define USBPCR_TXFSLSTUNE_INC_50PPT 0x0
#define USBPCR_TXHSXVTUNE_MASK GENMASK(5, 4)
#define USBPCR_TXHSXVTUNE_DFT 0x3
#define USBPCR_TXHSXVTUNE_DCR_15MV 0x1
#define USBPCR_TXRISETUNE_MASK GENMASK(5, 4)
#define USBPCR_TXRISETUNE_DFT 0x3
#define USBPCR_TXVREFTUNE_MASK GENMASK(3, 0)
#define USBPCR_TXVREFTUNE_INC_75PPT 0xb
#define USBPCR_TXVREFTUNE_INC_25PPT 0x7
#define USBPCR_TXVREFTUNE_DFT 0x5
/* bits within the USBRDTR register */
#define USBRDT_UTMI_RST BIT(27)
#define USBRDT_HB_MASK BIT(26)
#define USBRDT_VBFIL_LD_EN BIT(25)
#define USBRDT_IDDIG_EN BIT(24)
#define USBRDT_IDDIG_REG BIT(23)
#define USBRDT_VBFIL_EN BIT(2)
/* bits within the USBPCR1 register */
#define USBPCR1_BVLD_REG BIT(31)
#define USBPCR1_DPPD BIT(29)
#define USBPCR1_DMPD BIT(28)
#define USBPCR1_USB_SEL BIT(28)
#define USBPCR1_PORT_RST BIT(21)
#define USBPCR1_WORD_IF_16BIT BIT(19)
enum ingenic_usb_phy_version {
ID_JZ4770,
ID_JZ4775,
ID_JZ4780,
ID_X1000,
ID_X1830,
ID_X2000,
};
struct ingenic_soc_info {
enum ingenic_usb_phy_version version;
void (*usb_phy_init)(struct phy *phy);
};
struct ingenic_usb_phy {
const struct ingenic_soc_info *soc_info;
struct phy *phy;
void __iomem *base;
struct clk *clk;
struct regulator *vcc_supply;
};
static int ingenic_usb_phy_init(struct phy *phy)
{
struct ingenic_usb_phy *priv = phy_get_drvdata(phy);
int err;
u32 reg;
err = clk_prepare_enable(priv->clk);
if (err) {
dev_err(&phy->dev, "Unable to start clock: %d\n", err);
return err;
}
priv->soc_info->usb_phy_init(phy);
/* Wait for PHY to reset */
usleep_range(30, 300);
reg = readl(priv->base + REG_USBPCR_OFFSET);
writel(reg & ~USBPCR_POR, priv->base + REG_USBPCR_OFFSET);
usleep_range(300, 1000);
return 0;
}
static int ingenic_usb_phy_exit(struct phy *phy)
{
struct ingenic_usb_phy *priv = phy_get_drvdata(phy);
clk_disable_unprepare(priv->clk);
regulator_disable(priv->vcc_supply);
return 0;
}
static int ingenic_usb_phy_power_on(struct phy *phy)
{
struct ingenic_usb_phy *priv = phy_get_drvdata(phy);
int err;
err = regulator_enable(priv->vcc_supply);
if (err) {
dev_err(&phy->dev, "Unable to enable VCC: %d\n", err);
return err;
}
return 0;
}
static int ingenic_usb_phy_power_off(struct phy *phy)
{
struct ingenic_usb_phy *priv = phy_get_drvdata(phy);
regulator_disable(priv->vcc_supply);
return 0;
}
static int ingenic_usb_phy_set_mode(struct phy *phy,
enum phy_mode mode, int submode)
{
struct ingenic_usb_phy *priv = phy_get_drvdata(phy);
u32 reg;
switch (mode) {
case PHY_MODE_USB_HOST:
reg = readl(priv->base + REG_USBPCR_OFFSET);
u32p_replace_bits(&reg, 1, USBPCR_USB_MODE);
u32p_replace_bits(&reg, 0, USBPCR_VBUSVLDEXT);
u32p_replace_bits(&reg, 0, USBPCR_VBUSVLDEXTSEL);
u32p_replace_bits(&reg, 0, USBPCR_OTG_DISABLE);
writel(reg, priv->base + REG_USBPCR_OFFSET);
break;
case PHY_MODE_USB_DEVICE:
reg = readl(priv->base + REG_USBPCR_OFFSET);
u32p_replace_bits(&reg, 0, USBPCR_USB_MODE);
u32p_replace_bits(&reg, 1, USBPCR_VBUSVLDEXT);
u32p_replace_bits(&reg, 1, USBPCR_VBUSVLDEXTSEL);
u32p_replace_bits(&reg, 1, USBPCR_OTG_DISABLE);
writel(reg, priv->base + REG_USBPCR_OFFSET);
break;
case PHY_MODE_USB_OTG:
reg = readl(priv->base + REG_USBPCR_OFFSET);
u32p_replace_bits(&reg, 1, USBPCR_USB_MODE);
u32p_replace_bits(&reg, 1, USBPCR_VBUSVLDEXT);
u32p_replace_bits(&reg, 1, USBPCR_VBUSVLDEXTSEL);
u32p_replace_bits(&reg, 0, USBPCR_OTG_DISABLE);
writel(reg, priv->base + REG_USBPCR_OFFSET);
break;
default:
return -EINVAL;
}
return 0;
}
static const struct phy_ops ingenic_usb_phy_ops = {
.init = ingenic_usb_phy_init,
.exit = ingenic_usb_phy_exit,
.power_on = ingenic_usb_phy_power_on,
.power_off = ingenic_usb_phy_power_off,
.set_mode = ingenic_usb_phy_set_mode,
.owner = THIS_MODULE,
};
static void jz4770_usb_phy_init(struct phy *phy)
{
struct ingenic_usb_phy *priv = phy_get_drvdata(phy);
u32 reg;
reg = USBPCR_AVLD_REG | USBPCR_COMMONONN | USBPCR_POR |
FIELD_PREP(USBPCR_IDPULLUP_MASK, USBPCR_IDPULLUP_ALWAYS) |
FIELD_PREP(USBPCR_COMPDISTUNE_MASK, USBPCR_COMPDISTUNE_DFT) |
FIELD_PREP(USBPCR_OTGTUNE_MASK, USBPCR_OTGTUNE_DFT) |
FIELD_PREP(USBPCR_SQRXTUNE_MASK, USBPCR_SQRXTUNE_DFT) |
FIELD_PREP(USBPCR_TXFSLSTUNE_MASK, USBPCR_TXFSLSTUNE_DFT) |
FIELD_PREP(USBPCR_TXRISETUNE_MASK, USBPCR_TXRISETUNE_DFT) |
FIELD_PREP(USBPCR_TXVREFTUNE_MASK, USBPCR_TXVREFTUNE_DFT);
writel(reg, priv->base + REG_USBPCR_OFFSET);
}
static void jz4775_usb_phy_init(struct phy *phy)
{
struct ingenic_usb_phy *priv = phy_get_drvdata(phy);
u32 reg;
reg = readl(priv->base + REG_USBPCR1_OFFSET) | USBPCR1_USB_SEL |
USBPCR1_WORD_IF_16BIT;
writel(reg, priv->base + REG_USBPCR1_OFFSET);
reg = USBPCR_COMMONONN | USBPCR_POR |
FIELD_PREP(USBPCR_TXVREFTUNE_MASK, USBPCR_TXVREFTUNE_INC_75PPT);
writel(reg, priv->base + REG_USBPCR_OFFSET);
}
static void jz4780_usb_phy_init(struct phy *phy)
{
struct ingenic_usb_phy *priv = phy_get_drvdata(phy);
u32 reg;
reg = readl(priv->base + REG_USBPCR1_OFFSET) | USBPCR1_USB_SEL |
USBPCR1_WORD_IF_16BIT;
writel(reg, priv->base + REG_USBPCR1_OFFSET);
reg = USBPCR_TXPREEMPHTUNE | USBPCR_COMMONONN | USBPCR_POR;
writel(reg, priv->base + REG_USBPCR_OFFSET);
}
static void x1000_usb_phy_init(struct phy *phy)
{
struct ingenic_usb_phy *priv = phy_get_drvdata(phy);
u32 reg;
reg = readl(priv->base + REG_USBPCR1_OFFSET) | USBPCR1_WORD_IF_16BIT;
writel(reg, priv->base + REG_USBPCR1_OFFSET);
reg = USBPCR_TXPREEMPHTUNE | USBPCR_COMMONONN | USBPCR_POR |
FIELD_PREP(USBPCR_SQRXTUNE_MASK, USBPCR_SQRXTUNE_DCR_20PCT) |
FIELD_PREP(USBPCR_TXHSXVTUNE_MASK, USBPCR_TXHSXVTUNE_DCR_15MV) |
FIELD_PREP(USBPCR_TXVREFTUNE_MASK, USBPCR_TXVREFTUNE_INC_25PPT);
writel(reg, priv->base + REG_USBPCR_OFFSET);
}
static void x1830_usb_phy_init(struct phy *phy)
{
struct ingenic_usb_phy *priv = phy_get_drvdata(phy);
u32 reg;
/* rdt */
writel(USBRDT_VBFIL_EN | USBRDT_UTMI_RST, priv->base + REG_USBRDT_OFFSET);
reg = readl(priv->base + REG_USBPCR1_OFFSET) | USBPCR1_WORD_IF_16BIT |
USBPCR1_DMPD | USBPCR1_DPPD;
writel(reg, priv->base + REG_USBPCR1_OFFSET);
reg = USBPCR_VBUSVLDEXT | USBPCR_TXPREEMPHTUNE | USBPCR_COMMONONN | USBPCR_POR |
FIELD_PREP(USBPCR_IDPULLUP_MASK, USBPCR_IDPULLUP_OTG);
writel(reg, priv->base + REG_USBPCR_OFFSET);
}
static void x2000_usb_phy_init(struct phy *phy)
{
struct ingenic_usb_phy *priv = phy_get_drvdata(phy);
u32 reg;
reg = readl(priv->base + REG_USBPCR1_OFFSET) | USBPCR1_DPPD | USBPCR1_DMPD;
writel(reg & ~USBPCR1_PORT_RST, priv->base + REG_USBPCR1_OFFSET);
reg = USBPCR_POR | FIELD_PREP(USBPCR_IDPULLUP_MASK, USBPCR_IDPULLUP_OTG);
writel(reg, priv->base + REG_USBPCR_OFFSET);
}
static const struct ingenic_soc_info jz4770_soc_info = {
.version = ID_JZ4770,
.usb_phy_init = jz4770_usb_phy_init,
};
static const struct ingenic_soc_info jz4775_soc_info = {
.version = ID_JZ4775,
.usb_phy_init = jz4775_usb_phy_init,
};
static const struct ingenic_soc_info jz4780_soc_info = {
.version = ID_JZ4780,
.usb_phy_init = jz4780_usb_phy_init,
};
static const struct ingenic_soc_info x1000_soc_info = {
.version = ID_X1000,
.usb_phy_init = x1000_usb_phy_init,
};
static const struct ingenic_soc_info x1830_soc_info = {
.version = ID_X1830,
.usb_phy_init = x1830_usb_phy_init,
};
static const struct ingenic_soc_info x2000_soc_info = {
.version = ID_X2000,
.usb_phy_init = x2000_usb_phy_init,
};
static int ingenic_usb_phy_probe(struct platform_device *pdev)
{
struct ingenic_usb_phy *priv;
struct phy_provider *provider;
struct device *dev = &pdev->dev;
int err;
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
priv->soc_info = device_get_match_data(dev);
if (!priv->soc_info) {
dev_err(dev, "Error: No device match found\n");
return -ENODEV;
}
priv->base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(priv->base)) {
dev_err(dev, "Failed to map registers\n");
return PTR_ERR(priv->base);
}
priv->clk = devm_clk_get(dev, NULL);
if (IS_ERR(priv->clk)) {
err = PTR_ERR(priv->clk);
if (err != -EPROBE_DEFER)
dev_err(dev, "Failed to get clock\n");
return err;
}
priv->vcc_supply = devm_regulator_get(dev, "vcc");
if (IS_ERR(priv->vcc_supply)) {
err = PTR_ERR(priv->vcc_supply);
if (err != -EPROBE_DEFER)
dev_err(dev, "Failed to get regulator\n");
return err;
}
priv->phy = devm_phy_create(dev, NULL, &ingenic_usb_phy_ops);
if (IS_ERR(priv))
return PTR_ERR(priv);
phy_set_drvdata(priv->phy, priv);
provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
return PTR_ERR_OR_ZERO(provider);
}
static const struct of_device_id ingenic_usb_phy_of_matches[] = {
{ .compatible = "ingenic,jz4770-phy", .data = &jz4770_soc_info },
{ .compatible = "ingenic,jz4775-phy", .data = &jz4775_soc_info },
{ .compatible = "ingenic,jz4780-phy", .data = &jz4780_soc_info },
{ .compatible = "ingenic,x1000-phy", .data = &x1000_soc_info },
{ .compatible = "ingenic,x1830-phy", .data = &x1830_soc_info },
{ .compatible = "ingenic,x2000-phy", .data = &x2000_soc_info },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, ingenic_usb_phy_of_matches);
static struct platform_driver ingenic_usb_phy_driver = {
.probe = ingenic_usb_phy_probe,
.driver = {
.name = "ingenic-usb-phy",
.of_match_table = ingenic_usb_phy_of_matches,
},
};
module_platform_driver(ingenic_usb_phy_driver);
MODULE_AUTHOR("周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>");
MODULE_AUTHOR("漆鹏振 (Qi Pengzhen) <aric.pzqi@ingenic.com>");
MODULE_AUTHOR("Paul Cercueil <paul@crapouillou.net>");
MODULE_DESCRIPTION("Ingenic SoCs USB PHY driver");
MODULE_LICENSE("GPL");