mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-04 09:34:12 +08:00
ARM: dts: imx6: add support for Auvidea H100 board
The Auvidea H100 is a baseboard for the SolidRun MicroSOM. Its primary feature is a Toshiba TC358743 HDMI to CSI decoder, allowing the board to work as HDMI passthrough and framegrabber. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This commit is contained in:
Lucas Stach
Shawn Guo
parent
a28eeb43ee
commit
31836adea2
@ -356,6 +356,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
|
||||
imx6q-gw54xx.dtb \
|
||||
imx6q-gw551x.dtb \
|
||||
imx6q-gw552x.dtb \
|
||||
imx6q-h100.dtb \
|
||||
imx6q-hummingboard.dtb \
|
||||
imx6q-icore-rqs.dtb \
|
||||
imx6q-marsboard.dtb \
|
||||
|
||||
395
arch/arm/boot/dts/imx6q-h100.dts
Normal file
395
arch/arm/boot/dts/imx6q-h100.dts
Normal file
@ -0,0 +1,395 @@
|
||||
/*
|
||||
* Copyright (C) 2015 Lucas Stach <kernel@pengutronix.de>
|
||||
*
|
||||
* This file is dual-licensed: you can use it either under the terms
|
||||
* of the GPL or the X11 license, at your option. Note that this dual
|
||||
* licensing only applies to this file, and not this project as a
|
||||
* whole.
|
||||
*
|
||||
* a) This file is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* version 2 as published by the Free Software Foundation.
|
||||
*
|
||||
* This file is distributed in the hope that it will be useful
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* Or, alternatively
|
||||
*
|
||||
* b) Permission is hereby granted, free of charge, to any person
|
||||
* obtaining a copy of this software and associated documentation
|
||||
* files (the "Software"), to deal in the Software without
|
||||
* restriction, including without limitation the rights to use
|
||||
* copy, modify, merge, publish, distribute, sublicense, and/or
|
||||
* sell copies of the Software, and to permit persons to whom the
|
||||
* Software is furnished to do so, subject to the following
|
||||
* conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be
|
||||
* included in all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
|
||||
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
||||
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
||||
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
||||
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
|
||||
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
||||
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
||||
* OTHER DEALINGS IN THE SOFTWARE.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "imx6q.dtsi"
|
||||
#include "imx6qdl-microsom.dtsi"
|
||||
#include "imx6qdl-microsom-ar8035.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Auvidea H100";
|
||||
compatible = "auvidea,h100", "fsl,imx6q";
|
||||
|
||||
aliases {
|
||||
rtc0 = &rtc;
|
||||
rtc1 = &snvs_rtc;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = &uart2;
|
||||
};
|
||||
|
||||
hdmi_osc: hdmi-osc {
|
||||
compatible = "fixed-clock";
|
||||
clock-output-names = "hdmi-osc";
|
||||
clock-frequency = <27000000>;
|
||||
#clock-cells = <0>;
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_h100_leds>;
|
||||
|
||||
led0: power {
|
||||
label = "power";
|
||||
gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
|
||||
default-state = "on";
|
||||
};
|
||||
|
||||
led1: stream {
|
||||
label = "stream";
|
||||
gpios = <&gpio2 29 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led2: rec {
|
||||
label = "rec";
|
||||
gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
};
|
||||
};
|
||||
|
||||
reg_3p3v: regulator-3p3v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "3P3V";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
reg_hdmi: regulator-hdmi {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_h100_reg_hdmi>;
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>;
|
||||
regulator-name = "V_HDMI";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
reg_nvcc_sd2: regulator-nvcc-sd2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_h100_reg_nvcc_sd2>;
|
||||
compatible = "regulator-gpio";
|
||||
regulator-name = "NVCC_SD2";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-type = "voltage";
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
gpios = <&gpio4 9 GPIO_ACTIVE_HIGH>;
|
||||
states = <1800000 0x1
|
||||
3300000 0x0>;
|
||||
};
|
||||
|
||||
reg_usbh1_vbus: regulator-usb-h1-vbus {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_h100_usbh1_vbus>;
|
||||
regulator-name = "USB_H1_VBUS";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
};
|
||||
|
||||
reg_usbotg_vbus: regulator-usb-otg-vbus {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_h100_usbotg_vbus>;
|
||||
regulator-name = "USB_OTG_VBUS";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
};
|
||||
|
||||
sound-sgtl5000 {
|
||||
compatible = "fsl,imx-audio-sgtl5000";
|
||||
model = "H100 on-board codec";
|
||||
audio-codec = <&sgtl5000>;
|
||||
audio-routing =
|
||||
"MIC_IN", "Mic Jack",
|
||||
"Mic Jack", "Mic Bias",
|
||||
"Headphone Jack", "HP_OUT";
|
||||
mux-ext-port = <5>;
|
||||
mux-int-port = <1>;
|
||||
ssi-controller = <&ssi1>;
|
||||
};
|
||||
};
|
||||
|
||||
&audmux {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_h100_hdmi>;
|
||||
ddc-i2c-bus = <&i2c2>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_h100_i2c1>;
|
||||
status = "okay";
|
||||
|
||||
eeprom: 24c02@51 {
|
||||
compatible = "microchip,24c02", "at24";
|
||||
reg = <0x51>;
|
||||
};
|
||||
|
||||
rtc: pcf8523@68 {
|
||||
compatible = "nxp,pcf8523";
|
||||
reg = <0x68>;
|
||||
};
|
||||
|
||||
sgtl5000: sgtl5000@0a {
|
||||
compatible = "fsl,sgtl5000";
|
||||
reg = <0x0a>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_h100_sgtl5000>;
|
||||
clocks = <&clks IMX6QDL_CLK_CKO>;
|
||||
VDDA-supply = <®_3p3v>;
|
||||
VDDIO-supply = <®_3p3v>;
|
||||
};
|
||||
|
||||
tc358743: tc358743@0f {
|
||||
compatible = "toshiba,tc358743";
|
||||
reg = <0x0f>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_h100_tc358743>;
|
||||
clocks = <&hdmi_osc>;
|
||||
clock-names = "refclk";
|
||||
reset-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>;
|
||||
/* IRQ has a wrong pull resistor which renders it useless */
|
||||
|
||||
port@0 {
|
||||
tc358743_out: endpoint {
|
||||
remote-endpoint = <&mipi_csi2_in>;
|
||||
data-lanes = <1 2 3 4>;
|
||||
clock-lanes = <0>;
|
||||
clock-noncontinuous;
|
||||
link-frequencies = /bits/ 64 <297000000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
clock-frequency = <100000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_h100_i2c2>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&iomuxc {
|
||||
h100 {
|
||||
pinctrl_h100_hdmi: h100-hdmi {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_h100_i2c1: h100-i2c1 {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
|
||||
MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_h100_i2c2: h100-i2c2 {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
|
||||
MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_h100_leds: pinctrl-h100-leds {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_EIM_DA0__GPIO3_IO00 0x1b0b0
|
||||
MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x1b0b0
|
||||
MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0x1b0b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_h100_reg_hdmi: h100-reg-hdmi {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x1b0b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_h100_reg_nvcc_sd2: h100-reg-nvcc-sd2 {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x1b0b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_h100_sgtl5000: h100-sgtl5000 {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x130b0
|
||||
MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x130b0
|
||||
MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x110b0
|
||||
MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x130b0
|
||||
MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_h100_tc358743: h100-tc358743 {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_h100_uart2: h100-uart2 {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
|
||||
MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_h100_usbh1_vbus: hummingboard-usbh1-vbus {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_h100_usbotg_id: hummingboard-usbotg-id {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_h100_usbotg_vbus: hummingboard-usbotg-vbus {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_h100_usdhc2: h100-usdhc2 {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1f071
|
||||
MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
|
||||
MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059
|
||||
MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
|
||||
MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
|
||||
MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
|
||||
MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_h100_usdhc2_100mhz: h100-usdhc2-100mhz {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1f071
|
||||
MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170b9
|
||||
MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100b9
|
||||
MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170b9
|
||||
MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170b9
|
||||
MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170b9
|
||||
MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170b9
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_h100_usdhc2_200mhz: h100-usdhc2-200mhz {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1f071
|
||||
MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170f9
|
||||
MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100f9
|
||||
MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170f9
|
||||
MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170f9
|
||||
MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170f9
|
||||
MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170f9
|
||||
>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&mipi_csi {
|
||||
status = "okay";
|
||||
|
||||
port@0 {
|
||||
mipi_csi2_in: endpoint {
|
||||
remote-endpoint = <&tc358743_out>;
|
||||
data-lanes = <1 2 3 4>;
|
||||
clock-lanes = <0>;
|
||||
clock-noncontinuous;
|
||||
link-frequencies = /bits/ 64 <297000000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&ssi1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_h100_uart2>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbh1 {
|
||||
disable-over-current;
|
||||
vbus-supply = <®_usbh1_vbus>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbotg {
|
||||
disable-over-current;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_h100_usbotg_id>;
|
||||
vbus-supply = <®_usbotg_vbus>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usdhc2 {
|
||||
pinctrl-names = "default", "state_100mhz", "state_200mhz";
|
||||
pinctrl-0 = <&pinctrl_h100_usdhc2>;
|
||||
pinctrl-1 = <&pinctrl_h100_usdhc2_100mhz>;
|
||||
pinctrl-2 = <&pinctrl_h100_usdhc2_200mhz>;
|
||||
vmmc-supply = <®_3p3v>;
|
||||
vqmmc-supply = <®_nvcc_sd2>;
|
||||
cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
|
||||
status = "okay";
|
||||
};
|
||||
Loading…
Reference in New Issue
Block a user