From 307d9075a02b696e817b775c565e45c4fa3c32f2 Mon Sep 17 00:00:00 2001 From: Adam Manzanares Date: Mon, 12 Dec 2016 16:31:40 -0800 Subject: [PATCH] scsi: mpt3sas: Recognize and act on iopriority info This patch adds support for request iopriority handling in the mpt3sas layer. This works only when a ATA device is behind the SATL. The ATA device also has to indicate that it supports command priorities in the identify information that is pulled from the SATL. Signed-off-by: Adam Manzanares Acked-by: Sreekanth Reddy Signed-off-by: Martin K. Petersen --- drivers/scsi/mpt3sas/mpt3sas_base.h | 6 ++++ drivers/scsi/mpt3sas/mpt3sas_ctl.c | 43 ++++++++++++++++++++++++++-- drivers/scsi/mpt3sas/mpt3sas_scsih.c | 34 +++++++++++++++++++++- 3 files changed, 80 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h index 8de0eda8cd00..394fe1338d09 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.h +++ b/drivers/scsi/mpt3sas/mpt3sas_base.h @@ -402,6 +402,9 @@ struct MPT3SAS_DEVICE { u8 block; u8 tlr_snoop_check; u8 ignore_delay_remove; + /* Iopriority Command Handling */ + u8 ncq_prio_enable; + }; #define MPT3_CMD_NOT_USED 0x8000 /* free */ @@ -1458,4 +1461,7 @@ mpt3sas_setup_direct_io(struct MPT3SAS_ADAPTER *ioc, struct scsi_cmnd *scmd, struct _raid_device *raid_device, Mpi2SCSIIORequest_t *mpi_request, u16 smid); +/* NCQ Prio Handling Check */ +bool scsih_ncq_prio_supp(struct scsi_device *sdev); + #endif /* MPT3SAS_BASE_H_INCLUDED */ diff --git a/drivers/scsi/mpt3sas/mpt3sas_ctl.c b/drivers/scsi/mpt3sas/mpt3sas_ctl.c index 050bd788ad02..95f0f24bac05 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_ctl.c +++ b/drivers/scsi/mpt3sas/mpt3sas_ctl.c @@ -3325,8 +3325,6 @@ static DEVICE_ATTR(diag_trigger_mpi, S_IRUGO | S_IWUSR, /*********** diagnostic trigger suppport *** END ****************************/ - - /*****************************************/ struct device_attribute *mpt3sas_host_attrs[] = { @@ -3402,9 +3400,50 @@ _ctl_device_handle_show(struct device *dev, struct device_attribute *attr, } static DEVICE_ATTR(sas_device_handle, S_IRUGO, _ctl_device_handle_show, NULL); +/** + * _ctl_device_ncq_io_prio_show - send prioritized io commands to device + * @dev - pointer to embedded device + * @buf - the buffer returned + * + * A sysfs 'read/write' sdev attribute, only works with SATA + */ +static ssize_t +_ctl_device_ncq_prio_enable_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct scsi_device *sdev = to_scsi_device(dev); + struct MPT3SAS_DEVICE *sas_device_priv_data = sdev->hostdata; + + return snprintf(buf, PAGE_SIZE, "%d\n", + sas_device_priv_data->ncq_prio_enable); +} + +static ssize_t +_ctl_device_ncq_prio_enable_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct scsi_device *sdev = to_scsi_device(dev); + struct MPT3SAS_DEVICE *sas_device_priv_data = sdev->hostdata; + bool ncq_prio_enable = 0; + + if (kstrtobool(buf, &ncq_prio_enable)) + return -EINVAL; + + if (!scsih_ncq_prio_supp(sdev)) + return -EINVAL; + + sas_device_priv_data->ncq_prio_enable = ncq_prio_enable; + return strlen(buf); +} +static DEVICE_ATTR(sas_ncq_prio_enable, S_IRUGO | S_IWUSR, + _ctl_device_ncq_prio_enable_show, + _ctl_device_ncq_prio_enable_store); + struct device_attribute *mpt3sas_dev_attrs[] = { &dev_attr_sas_address, &dev_attr_sas_device_handle, + &dev_attr_sas_ncq_prio_enable, NULL, }; diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c index 5c8f75247d73..b5c966e319d3 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c @@ -4053,6 +4053,8 @@ scsih_qcmd(struct Scsi_Host *shost, struct scsi_cmnd *scmd) struct MPT3SAS_DEVICE *sas_device_priv_data; struct MPT3SAS_TARGET *sas_target_priv_data; struct _raid_device *raid_device; + struct request *rq = scmd->request; + int class; Mpi2SCSIIORequest_t *mpi_request; u32 mpi_control; u16 smid; @@ -4115,7 +4117,12 @@ scsih_qcmd(struct Scsi_Host *shost, struct scsi_cmnd *scmd) /* set tags */ mpi_control |= MPI2_SCSIIO_CONTROL_SIMPLEQ; - + /* NCQ Prio supported, make sure control indicated high priority */ + if (sas_device_priv_data->ncq_prio_enable) { + class = IOPRIO_PRIO_CLASS(req_get_ioprio(rq)); + if (class == IOPRIO_CLASS_RT) + mpi_control |= 1 << MPI2_SCSIIO_CONTROL_CMDPRI_SHIFT; + } /* Make sure Device is not raid volume. * We do not expose raid functionality to upper layer for warpdrive. */ @@ -9099,6 +9106,31 @@ scsih_pci_mmio_enabled(struct pci_dev *pdev) return PCI_ERS_RESULT_RECOVERED; } +/** + * scsih__ncq_prio_supp - Check for NCQ command priority support + * @sdev: scsi device struct + * + * This is called when a user indicates they would like to enable + * ncq command priorities. This works only on SATA devices. + */ +bool scsih_ncq_prio_supp(struct scsi_device *sdev) +{ + unsigned char *buf; + bool ncq_prio_supp = false; + + if (!scsi_device_supports_vpd(sdev)) + return ncq_prio_supp; + + buf = kmalloc(SCSI_VPD_PG_LEN, GFP_KERNEL); + if (!buf) + return ncq_prio_supp; + + if (!scsi_get_vpd_page(sdev, 0x89, buf, SCSI_VPD_PG_LEN)) + ncq_prio_supp = (buf[213] >> 4) & 1; + + kfree(buf); + return ncq_prio_supp; +} /* * The pci device ids are defined in mpi/mpi2_cnfg.h. */