korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-11-11 12:28:41 +08:00
Code Issues Packages Projects Releases Wiki Activity

ARM: SoC fixes for v5.10, part 3

Browse Source 
Another set of patches for devicetree files and Arm
 SoC specific drivers:
 
  - A fix for OP-TEE shared memory on non-SMP systems
 
  - multiple code fixes for the OMAP platform, including
    one regression for the CPSW network driver and a few
    runtime warning fixes
 
  - Some DT patches for the Rockchip RK3399 platform,
    in particular fixing the MMC device ordering that
    recently became nondeterministic with async probe.
 
  - Multiple DT fixes for the Tegra platform, including
    a regression fix for suspend/resume on TX2
 
  - A regression fix for a user-triggered fault in the
    NXP dpio driver
 
  - A regression fix for a bug caused by an earlier bug
    fix in the xilinx firmware driver
 
  - Two more DTC warning fixes
 
  - Sylvain Lemieux steps down as maintainer for the
    NXP LPC32xx platform
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAl/BZkEACgkQmmx57+YA
 GNkl/xAAiFj6+N5iTVv/l1p28x+YhID/A9ahCCexEpvq+sU/PCFmGub0chw/ns6W
 xIM2+YAFcuIbfPt7J/eYG+q1FkQl3N+hsJ5yi9NOC4ugQZtq8Ag7ZKEzlLMCtBUU
 XD7Y6cz7BD/4FZ4XIn9w84qh7LoehOgH1MKW/wt+sCBpkwMroqmVmF/N9XzcruaB
 LX4M9bt5Ibt+fc+rkC4ka03jq41DCquQsSjSroLzSuFNkAy+OwvrOTJH2fLgqqlM
 Eu6//AYQzE8hz+2kHkpc5mCqfxvRN6HcITwgopQwMhXn092WoPu5zRPiUrILw2CK
 TtEhMDfJ1Q60A2NSuCDAho98rTsPEf4zMrql7rzDwo0M0wdv0xE6hWKglAVhPywT
 Hs1SFmd1Z3+7n5IcwufU3JHVJ9VViJxXJK3WrLU9skm+CfZQpGOmXrmqVTfNtkb2
 BK58guf11APvojzZ0nb8FGkxn/mCgCgNCMwRna1rjvtzQsnL+d8t7Cz5hXDABgpy
 QVXDhrGT2cLTizGGRcMIuHMs2pNB25Hj4mgLsuarDwofZktFOWtRARoz6ialv/MI
 H6ff5/8nOxgVFyE7GYjuVz69igBfnb4NYN/O3A0d6MroiTzZbwNXbq3B2vVWmVa5
 hBSqj54n6Me2Bk/q0KPJlpL8qRKUuoU9lKTzY7ZyaQVHZzEO5+c=
 =yGOq
 -----END PGP SIGNATURE-----

Merge tag 'arm-soc-fixes-v5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC fixes from Arnd Bergmann:
 "Another set of patches for devicetree files and Arm SoC specific
  drivers:

   - A fix for OP-TEE shared memory on non-SMP systems

   - multiple code fixes for the OMAP platform, including one regression
     for the CPSW network driver and a few runtime warning fixes

   - Some DT patches for the Rockchip RK3399 platform, in particular
     fixing the MMC device ordering that recently became
     nondeterministic with async probe.

   - Multiple DT fixes for the Tegra platform, including a regression
     fix for suspend/resume on TX2

   - A regression fix for a user-triggered fault in the NXP dpio driver

   - A regression fix for a bug caused by an earlier bug fix in the
     xilinx firmware driver

   - Two more DTC warning fixes

   - Sylvain Lemieux steps down as maintainer for the NXP LPC32xx
     platform"

* tag 'arm-soc-fixes-v5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (24 commits)
  arm64: tegra: Fix Tegra234 VDK node names
  arm64: tegra: Wrong AON HSP reg property size
  arm64: tegra: Fix USB_VBUS_EN0 regulator on Jetson TX1
  arm64: tegra: Correct the UART for Jetson Xavier NX
  arm64: tegra: Disable the ACONNECT for Jetson TX2
  optee: add writeback to valid memory type
  firmware: xilinx: Use hash-table for api feature check
  firmware: xilinx: Fix SD DLL node reset issue
  soc: fsl: dpio: Get the cpumask through cpumask_of(cpu)
  ARM: dts: dra76x: m_can: fix order of clocks
  bus: ti-sysc: suppress err msg for timers used as clockevent/source
  MAINTAINERS: Remove myself as LPC32xx maintainers
  arm64: dts: qcom: clear the warnings caused by empty dma-ranges
  arm64: dts: broadcom: clear the warnings caused by empty dma-ranges
  ARM: dts: am437x-l4: fix compatible for cpsw switch dt node
  arm64: dts: rockchip: Reorder LED triggers from mmc devices on rk3399-roc-pc.
  arm64: dts: rockchip: Assign a fixed index to mmc devices on rk3399 boards.
  arm64: dts: rockchip: Remove system-power-controller from pmic on Odroid Go Advance
  arm64: dts: rockchip: fix NanoPi R2S GMAC clock name
  ARM: OMAP2+: Manage MPU state properly for omap_enter_idle_coupled()
  ...
This commit is contained in:
Linus Torvalds 2020-11-27 14:48:03 -08:00
commit 303bc93472
22 changed files with 150 additions and 119 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
MAINTAINERS
View File

@ -1995,7 +1995,6 @@ N: lpc18xx
ARM/LPC32XX SOC SUPPORT
M: Vladimir Zapolskiy <vz@mleia.com>
M: Sylvain Lemieux <slemieux.tyco@gmail.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
T: git git://github.com/vzapolskiy/linux-lpc32xx.git

2
arch/arm/boot/dts/am437x-l4.dtsi
View File

@ -521,7 +521,7 @@
ranges = <0x0 0x100000 0x8000>;
mac_sw: switch@0 {
compatible = "ti,am4372-cpsw","ti,cpsw-switch";
compatible = "ti,am4372-cpsw-switch", "ti,cpsw-switch";
reg = <0x0 0x4000>;
ranges = <0 0 0x4000>;
clocks = <&cpsw_125mhz_gclk>, <&dpll_clksel_mac_clk>;

4
arch/arm/boot/dts/dra76x.dtsi
View File

@ -32,8 +32,8 @@
interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "int0", "int1";
clocks = <&mcan_clk>, <&l3_iclk_div>;
clock-names = "cclk", "hclk";
clocks = <&l3_iclk_div>, <&mcan_clk>;
clock-names = "hclk", "cclk";
bosch,mram-cfg = <0x0 0 0 32 0 0 1 1>;
};
};

3
arch/arm/mach-omap2/Kconfig
View File

@ -7,7 +7,6 @@ config ARCH_OMAP2
depends on ARCH_MULTI_V6
select ARCH_OMAP2PLUS
select CPU_V6
select PM_GENERIC_DOMAINS if PM
select SOC_HAS_OMAP2_SDRC
config ARCH_OMAP3
@ -106,6 +105,8 @@ config ARCH_OMAP2PLUS
select OMAP_DM_TIMER
select OMAP_GPMC
select PINCTRL
select PM_GENERIC_DOMAINS if PM
select PM_GENERIC_DOMAINS_OF if PM
select RESET_CONTROLLER
select SOC_BUS
select TI_SYSC

8
arch/arm/mach-omap2/cpuidle44xx.c
View File

@ -175,8 +175,11 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev,
if (mpuss_can_lose_context) {
error = cpu_cluster_pm_enter();
if (error) {
omap_set_pwrdm_state(mpu_pd, PWRDM_POWER_ON);
goto cpu_cluster_pm_out;
index = 0;
cx = state_ptr + index;
pwrdm_set_logic_retst(mpu_pd, cx->mpu_logic_state);
omap_set_pwrdm_state(mpu_pd, cx->mpu_state);
mpuss_can_lose_context = 0;
}
}
}
@ -184,7 +187,6 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev,
omap4_enter_lowpower(dev->cpu, cx->cpu_state);
cpu_done[dev->cpu] = true;
cpu_cluster_pm_out:
/* Wakeup CPU1 only if it is not offlined */
if (dev->cpu == 0 && cpumask_test_cpu(1, cpu_online_mask)) {

20
arch/arm64/boot/dts/broadcom/stingray/stingray-usb.dtsi
View File

@ -5,20 +5,20 @@
usb {
compatible = "simple-bus";
dma-ranges;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x0 0x68500000 0x00400000>;
#address-cells = <2>;
#size-cells = <2>;
ranges = <0x0 0x0 0x0 0x68500000 0x0 0x00400000>;
usbphy0: usb-phy@0 {
compatible = "brcm,sr-usb-combo-phy";
reg = <0x00000000 0x100>;
reg = <0x0 0x00000000 0x0 0x100>;
#phy-cells = <1>;
status = "disabled";
};
xhci0: usb@1000 {
compatible = "generic-xhci";
reg = <0x00001000 0x1000>;
reg = <0x0 0x00001000 0x0 0x1000>;
interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
phys = <&usbphy0 1>, <&usbphy0 0>;
phy-names = "phy0", "phy1";
@ -28,7 +28,7 @@
bdc0: usb@2000 {
compatible = "brcm,bdc-v0.16";
reg = <0x00002000 0x1000>;
reg = <0x0 0x00002000 0x0 0x1000>;
interrupts = <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>;
phys = <&usbphy0 0>, <&usbphy0 1>;
phy-names = "phy0", "phy1";
@ -38,21 +38,21 @@
usbphy1: usb-phy@10000 {
compatible = "brcm,sr-usb-combo-phy";
reg = <0x00010000 0x100>;
reg = <0x0 0x00010000 0x0 0x100>;
#phy-cells = <1>;
status = "disabled";
};
usbphy2: usb-phy@20000 {
compatible = "brcm,sr-usb-hs-phy";
reg = <0x00020000 0x100>;
reg = <0x0 0x00020000 0x0 0x100>;
#phy-cells = <0>;
status = "disabled";
};
xhci1: usb@11000 {
compatible = "generic-xhci";
reg = <0x00011000 0x1000>;
reg = <0x0 0x00011000 0x0 0x1000>;
interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
phys = <&usbphy1 1>, <&usbphy2>, <&usbphy1 0>;
phy-names = "phy0", "phy1", "phy2";
@ -62,7 +62,7 @@
bdc1: usb@21000 {
compatible = "brcm,bdc-v0.16";
reg = <0x00021000 0x1000>;
reg = <0x0 0x00021000 0x0 0x1000>;
interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
phys = <&usbphy2>;
phy-names = "phy0";

12
arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
View File

@ -10,18 +10,6 @@
model = "NVIDIA Jetson TX2 Developer Kit";
compatible = "nvidia,p2771-0000", "nvidia,tegra186";
aconnect {
status = "okay";
dma-controller@2930000 {
status = "okay";
};
interrupt-controller@2a40000 {
status = "okay";
};
};
i2c@3160000 {
power-monitor@42 {
compatible = "ti,ina3221";

2
arch/arm64/boot/dts/nvidia/tegra194-p3668-0000.dtsi
View File

@ -54,7 +54,7 @@
status = "okay";
};
serial@c280000 {
serial@3100000 {
status = "okay";
};

2
arch/arm64/boot/dts/nvidia/tegra194.dtsi
View File

@ -1161,7 +1161,7 @@
hsp_aon: hsp@c150000 {
compatible = "nvidia,tegra194-hsp", "nvidia,tegra186-hsp";
reg = <0x0c150000 0xa0000>;
reg = <0x0c150000 0x90000>;
interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,

20
arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
View File

@ -1663,16 +1663,6 @@
vin-supply = <&vdd_5v0_sys>;
};
vdd_usb_vbus_otg: regulator@11 {
compatible = "regulator-fixed";
regulator-name = "USB_VBUS_EN0";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio TEGRA_GPIO(CC, 4) GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&vdd_5v0_sys>;
};
vdd_hdmi: regulator@10 {
compatible = "regulator-fixed";
regulator-name = "VDD_HDMI_5V0";
@ -1712,4 +1702,14 @@
enable-active-high;
vin-supply = <&vdd_3v3_sys>;
};
vdd_usb_vbus_otg: regulator@14 {
compatible = "regulator-fixed";
regulator-name = "USB_VBUS_EN0";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio TEGRA_GPIO(CC, 4) GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&vdd_5v0_sys>;
};
};

6
arch/arm64/boot/dts/nvidia/tegra234-sim-vdk.dts
View File

@ -8,7 +8,7 @@
compatible = "nvidia,tegra234-vdk", "nvidia,tegra234";
aliases {
sdhci3 = "/cbb@0/sdhci@3460000";
mmc3 = "/bus@0/mmc@3460000";
serial0 = &uarta;
};
@ -17,12 +17,12 @@
stdout-path = "serial0:115200n8";
};
cbb@0 {
bus@0 {
serial@3100000 {
status = "okay";
};
sdhci@3460000 {
mmc@3460000 {
status = "okay";
bus-width = <8>;
non-removable;

72
arch/arm64/boot/dts/qcom/ipq6018.dtsi
View File

@ -179,22 +179,22 @@
};
soc: soc {
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0 0 0xffffffff>;
#address-cells = <2>;
#size-cells = <2>;
ranges = <0 0 0 0 0x0 0xffffffff>;
dma-ranges;
compatible = "simple-bus";
prng: qrng@e1000 {
compatible = "qcom,prng-ee";
reg = <0xe3000 0x1000>;
reg = <0x0 0xe3000 0x0 0x1000>;
clocks = <&gcc GCC_PRNG_AHB_CLK>;
clock-names = "core";
};
cryptobam: dma@704000 {
compatible = "qcom,bam-v1.7.0";
reg = <0x00704000 0x20000>;
reg = <0x0 0x00704000 0x0 0x20000>;
interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_CRYPTO_AHB_CLK>;
clock-names = "bam_clk";
@ -206,7 +206,7 @@
crypto: crypto@73a000 {
compatible = "qcom,crypto-v5.1";
reg = <0x0073a000 0x6000>;
reg = <0x0 0x0073a000 0x0 0x6000>;
clocks = <&gcc GCC_CRYPTO_AHB_CLK>,
<&gcc GCC_CRYPTO_AXI_CLK>,
<&gcc GCC_CRYPTO_CLK>;
@ -217,7 +217,7 @@
tlmm: pinctrl@1000000 {
compatible = "qcom,ipq6018-pinctrl";
reg = <0x01000000 0x300000>;
reg = <0x0 0x01000000 0x0 0x300000>;
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
@ -235,7 +235,7 @@
gcc: gcc@1800000 {
compatible = "qcom,gcc-ipq6018";
reg = <0x01800000 0x80000>;
reg = <0x0 0x01800000 0x0 0x80000>;
clocks = <&xo>, <&sleep_clk>;
clock-names = "xo", "sleep_clk";
#clock-cells = <1>;
@ -244,17 +244,17 @@
tcsr_mutex_regs: syscon@1905000 {
compatible = "syscon";
reg = <0x01905000 0x8000>;
reg = <0x0 0x01905000 0x0 0x8000>;
};
tcsr_q6: syscon@1945000 {
compatible = "syscon";
reg = <0x01945000 0xe000>;
reg = <0x0 0x01945000 0x0 0xe000>;
};
blsp_dma: dma@7884000 {
compatible = "qcom,bam-v1.7.0";
reg = <0x07884000 0x2b000>;
reg = <0x0 0x07884000 0x0 0x2b000>;
interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "bam_clk";
@ -264,7 +264,7 @@
blsp1_uart3: serial@78b1000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0x078b1000 0x200>;
reg = <0x0 0x078b1000 0x0 0x200>;
interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
@ -276,7 +276,7 @@
compatible = "qcom,spi-qup-v2.2.1";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x078b5000 0x600>;
reg = <0x0 0x078b5000 0x0 0x600>;
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
spi-max-frequency = <50000000>;
clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
@ -291,7 +291,7 @@
compatible = "qcom,spi-qup-v2.2.1";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x078b6000 0x600>;
reg = <0x0 0x078b6000 0x0 0x600>;
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
spi-max-frequency = <50000000>;
clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>,
@ -306,7 +306,7 @@
compatible = "qcom,i2c-qup-v2.2.1";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x078b6000 0x600>;
reg = <0x0 0x078b6000 0x0 0x600>;
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_AHB_CLK>,
<&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>;
@ -321,7 +321,7 @@
compatible = "qcom,i2c-qup-v2.2.1";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x078b7000 0x600>;
reg = <0x0 0x078b7000 0x0 0x600>;
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_AHB_CLK>,
<&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>;
@ -336,24 +336,24 @@
compatible = "qcom,msm-qgic2";
interrupt-controller;
#interrupt-cells = <0x3>;
reg = <0x0b000000 0x1000>, /*GICD*/
<0x0b002000 0x1000>, /*GICC*/
<0x0b001000 0x1000>, /*GICH*/
<0x0b004000 0x1000>; /*GICV*/
reg = <0x0 0x0b000000 0x0 0x1000>, /*GICD*/
<0x0 0x0b002000 0x0 0x1000>, /*GICC*/
<0x0 0x0b001000 0x0 0x1000>, /*GICH*/
<0x0 0x0b004000 0x0 0x1000>; /*GICV*/
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
};
watchdog@b017000 {
compatible = "qcom,kpss-wdt";
interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>;
reg = <0x0b017000 0x40>;
reg = <0x0 0x0b017000 0x0 0x40>;
clocks = <&sleep_clk>;
timeout-sec = <10>;
};
apcs_glb: mailbox@b111000 {
compatible = "qcom,ipq6018-apcs-apps-global";
reg = <0x0b111000 0x1000>;
reg = <0x0 0x0b111000 0x0 0x1000>;
#clock-cells = <1>;
clocks = <&a53pll>, <&xo>;
clock-names = "pll", "xo";
@ -362,7 +362,7 @@
a53pll: clock@b116000 {
compatible = "qcom,ipq6018-a53pll";
reg = <0x0b116000 0x40>;
reg = <0x0 0x0b116000 0x0 0x40>;
#clock-cells = <0>;
clocks = <&xo>;
clock-names = "xo";
@ -377,68 +377,68 @@
};
timer@b120000 {
#address-cells = <1>;
#size-cells = <1>;
#address-cells = <2>;
#size-cells = <2>;
ranges;
compatible = "arm,armv7-timer-mem";
reg = <0x0b120000 0x1000>;
reg = <0x0 0x0b120000 0x0 0x1000>;
clock-frequency = <19200000>;
frame@b120000 {
frame-number = <0>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x0b121000 0x1000>,
<0x0b122000 0x1000>;
reg = <0x0 0x0b121000 0x0 0x1000>,
<0x0 0x0b122000 0x0 0x1000>;
};
frame@b123000 {
frame-number = <1>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xb123000 0x1000>;
reg = <0x0 0xb123000 0x0 0x1000>;
status = "disabled";
};
frame@b124000 {
frame-number = <2>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x0b124000 0x1000>;
reg = <0x0 0x0b124000 0x0 0x1000>;
status = "disabled";
};
frame@b125000 {
frame-number = <3>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x0b125000 0x1000>;
reg = <0x0 0x0b125000 0x0 0x1000>;
status = "disabled";
};
frame@b126000 {
frame-number = <4>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x0b126000 0x1000>;
reg = <0x0 0x0b126000 0x0 0x1000>;
status = "disabled";
};
frame@b127000 {
frame-number = <5>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x0b127000 0x1000>;
reg = <0x0 0x0b127000 0x0 0x1000>;
status = "disabled";
};
frame@b128000 {
frame-number = <6>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x0b128000 0x1000>;
reg = <0x0 0x0b128000 0x0 0x1000>;
status = "disabled";
};
};
q6v5_wcss: remoteproc@cd00000 {
compatible = "qcom,ipq8074-wcss-pil";
reg = <0x0cd00000 0x4040>,
<0x004ab000 0x20>;
reg = <0x0 0x0cd00000 0x0 0x4040>,
<0x0 0x004ab000 0x0 0x20>;
reg-names = "qdsp6",
"rmb";
interrupts-extended = <&intc GIC_SPI 325 IRQ_TYPE_EDGE_RISING>,

1
arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts
View File

@ -243,7 +243,6 @@
interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pmic_int>;
rockchip,system-power-controller;
wakeup-source;
#clock-cells = <1>;
clock-output-names = "rk808-clkout1", "xin32k";

2
arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
View File

@ -20,7 +20,7 @@
gmac_clk: gmac-clock {
compatible = "fixed-clock";
clock-frequency = <125000000>;
clock-output-names = "gmac_clk";
clock-output-names = "gmac_clkin";
#clock-cells = <0>;
};

4
arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
View File

@ -74,14 +74,14 @@
label = "red:diy";
gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
default-state = "off";
linux,default-trigger = "mmc1";
linux,default-trigger = "mmc2";
};
yellow_led: led-2 {
label = "yellow:yellow-led";
gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
default-state = "off";
linux,default-trigger = "mmc0";
linux,default-trigger = "mmc1";
};
};

3
arch/arm64/boot/dts/rockchip/rk3399.dtsi
View File

@ -29,6 +29,9 @@
i2c6 = &i2c6;
i2c7 = &i2c7;
i2c8 = &i2c8;
mmc0 = &sdio0;
mmc1 = &sdmmc;
mmc2 = &sdhci;
serial0 = &uart0;
serial1 = &uart1;
serial2 = &uart2;

29
drivers/bus/ti-sysc.c
View File

@ -227,6 +227,9 @@ static int sysc_wait_softreset(struct sysc *ddata)
u32 sysc_mask, syss_done, rstval;
int syss_offset, error = 0;
if (ddata->cap->regbits->srst_shift < 0)
return 0;
syss_offset = ddata->offsets[SYSC_SYSSTATUS];
sysc_mask = BIT(ddata->cap->regbits->srst_shift);
@ -970,9 +973,15 @@ static int sysc_enable_module(struct device *dev)
return error;
}
}
error = sysc_wait_softreset(ddata);
if (error)
dev_warn(ddata->dev, "OCP softreset timed out\n");
/*
* Some modules like i2c and hdq1w have unusable reset status unless
* the module reset quirk is enabled. Skip status check on enable.
*/
if (!(ddata->cfg.quirks & SYSC_MODULE_QUIRK_ENA_RESETDONE)) {
error = sysc_wait_softreset(ddata);
if (error)
dev_warn(ddata->dev, "OCP softreset timed out\n");
}
if (ddata->cfg.quirks & SYSC_QUIRK_OPT_CLKS_IN_RESET)
sysc_disable_opt_clocks(ddata);
@ -1373,17 +1382,17 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = {
SYSC_QUIRK("hdmi", 0, 0, 0x10, -ENODEV, 0x50030200, 0xffffffff,
SYSC_QUIRK_OPT_CLKS_NEEDED),
SYSC_QUIRK("hdq1w", 0, 0, 0x14, 0x18, 0x00000006, 0xffffffff,
SYSC_MODULE_QUIRK_HDQ1W),
SYSC_MODULE_QUIRK_HDQ1W | SYSC_MODULE_QUIRK_ENA_RESETDONE),
SYSC_QUIRK("hdq1w", 0, 0, 0x14, 0x18, 0x0000000a, 0xffffffff,
SYSC_MODULE_QUIRK_HDQ1W),
SYSC_MODULE_QUIRK_HDQ1W | SYSC_MODULE_QUIRK_ENA_RESETDONE),
SYSC_QUIRK("i2c", 0, 0, 0x20, 0x10, 0x00000036, 0x000000ff,
SYSC_MODULE_QUIRK_I2C),
SYSC_MODULE_QUIRK_I2C | SYSC_MODULE_QUIRK_ENA_RESETDONE),
SYSC_QUIRK("i2c", 0, 0, 0x20, 0x10, 0x0000003c, 0x000000ff,
SYSC_MODULE_QUIRK_I2C),
SYSC_MODULE_QUIRK_I2C | SYSC_MODULE_QUIRK_ENA_RESETDONE),
SYSC_QUIRK("i2c", 0, 0, 0x20, 0x10, 0x00000040, 0x000000ff,
SYSC_MODULE_QUIRK_I2C),
SYSC_MODULE_QUIRK_I2C | SYSC_MODULE_QUIRK_ENA_RESETDONE),
SYSC_QUIRK("i2c", 0, 0, 0x10, 0x90, 0x5040000a, 0xfffff0f0,
SYSC_MODULE_QUIRK_I2C),
SYSC_MODULE_QUIRK_I2C | SYSC_MODULE_QUIRK_ENA_RESETDONE),
SYSC_QUIRK("gpu", 0x50000000, 0x14, -ENODEV, -ENODEV, 0x00010201, 0xffffffff, 0),
SYSC_QUIRK("gpu", 0x50000000, 0xfe00, 0xfe10, -ENODEV, 0x40000000 , 0xffffffff,
SYSC_MODULE_QUIRK_SGX),
@ -2880,7 +2889,7 @@ static int sysc_check_active_timer(struct sysc *ddata)
if ((ddata->cfg.quirks & SYSC_QUIRK_NO_RESET_ON_INIT) &&
(ddata->cfg.quirks & SYSC_QUIRK_NO_IDLE))
return -EBUSY;
return -ENXIO;
return 0;
}

65
drivers/firmware/xilinx/zynqmp.c
View File

@ -20,12 +20,28 @@
#include <linux/of_platform.h>
#include <linux/slab.h>
#include <linux/uaccess.h>
#include <linux/hashtable.h>
#include <linux/firmware/xlnx-zynqmp.h>
#include "zynqmp-debug.h"
/* Max HashMap Order for PM API feature check (1<<7 = 128) */
#define PM_API_FEATURE_CHECK_MAX_ORDER 7
static bool feature_check_enabled;
static u32 zynqmp_pm_features[PM_API_MAX];
DEFINE_HASHTABLE(pm_api_features_map, PM_API_FEATURE_CHECK_MAX_ORDER);
/**
* struct pm_api_feature_data - PM API Feature data
* @pm_api_id: PM API Id, used as key to index into hashmap
* @feature_status: status of PM API feature: valid, invalid
* @hentry: hlist_node that hooks this entry into hashtable
*/
struct pm_api_feature_data {
u32 pm_api_id;
int feature_status;
struct hlist_node hentry;
};
static const struct mfd_cell firmware_devs[] = {
{
@ -142,29 +158,37 @@ static int zynqmp_pm_feature(u32 api_id)
int ret;
u32 ret_payload[PAYLOAD_ARG_CNT];
u64 smc_arg[2];
struct pm_api_feature_data *feature_data;
if (!feature_check_enabled)
return 0;
/* Return value if feature is already checked */
if (api_id > ARRAY_SIZE(zynqmp_pm_features))
return PM_FEATURE_INVALID;
/* Check for existing entry in hash table for given api */
hash_for_each_possible(pm_api_features_map, feature_data, hentry,
api_id) {
if (feature_data->pm_api_id == api_id)
return feature_data->feature_status;
}
if (zynqmp_pm_features[api_id] != PM_FEATURE_UNCHECKED)
return zynqmp_pm_features[api_id];
/* Add new entry if not present */
feature_data = kmalloc(sizeof(*feature_data), GFP_KERNEL);
if (!feature_data)
return -ENOMEM;
feature_data->pm_api_id = api_id;
smc_arg[0] = PM_SIP_SVC | PM_FEATURE_CHECK;
smc_arg[1] = api_id;
ret = do_fw_call(smc_arg[0], smc_arg[1], 0, ret_payload);
if (ret) {
zynqmp_pm_features[api_id] = PM_FEATURE_INVALID;
return PM_FEATURE_INVALID;
}
if (ret)
ret = -EOPNOTSUPP;
else
ret = ret_payload[1];
zynqmp_pm_features[api_id] = ret_payload[1];
feature_data->feature_status = ret;
hash_add(pm_api_features_map, &feature_data->hentry, api_id);
return zynqmp_pm_features[api_id];
return ret;
}
/**
@ -200,9 +224,12 @@ int zynqmp_pm_invoke_fn(u32 pm_api_id, u32 arg0, u32 arg1,
* Make sure to stay in x0 register
*/
u64 smc_arg[4];
int ret;
if (zynqmp_pm_feature(pm_api_id) == PM_FEATURE_INVALID)
return -ENOTSUPP;
/* Check if feature is supported or not */
ret = zynqmp_pm_feature(pm_api_id);
if (ret < 0)
return ret;
smc_arg[0] = PM_SIP_SVC | pm_api_id;
smc_arg[1] = ((u64)arg1 << 32) | arg0;
@ -615,7 +642,7 @@ EXPORT_SYMBOL_GPL(zynqmp_pm_set_sd_tapdelay);
*/
int zynqmp_pm_sd_dll_reset(u32 node_id, u32 type)
{
return zynqmp_pm_invoke_fn(PM_IOCTL, node_id, IOCTL_SET_SD_TAPDELAY,
return zynqmp_pm_invoke_fn(PM_IOCTL, node_id, IOCTL_SD_DLL_RESET,
type, 0, NULL);
}
EXPORT_SYMBOL_GPL(zynqmp_pm_sd_dll_reset);
@ -1252,9 +1279,17 @@ static int zynqmp_firmware_probe(struct platform_device *pdev)
static int zynqmp_firmware_remove(struct platform_device *pdev)
{
struct pm_api_feature_data *feature_data;
int i;
mfd_remove_devices(&pdev->dev);
zynqmp_pm_api_debugfs_exit();
hash_for_each(pm_api_features_map, i, feature_data, hentry) {
hash_del(&feature_data->hentry);
kfree(feature_data);
}
return 0;
}

5
drivers/soc/fsl/dpio/dpio-driver.c
View File

@ -95,7 +95,6 @@ static int register_dpio_irq_handlers(struct fsl_mc_device *dpio_dev, int cpu)
{
int error;
struct fsl_mc_device_irq *irq;
cpumask_t mask;
irq = dpio_dev->irqs[0];
error = devm_request_irq(&dpio_dev->dev,
@ -112,9 +111,7 @@ static int register_dpio_irq_handlers(struct fsl_mc_device *dpio_dev, int cpu)
}
/* set the affinity hint */
cpumask_clear(&mask);
cpumask_set_cpu(cpu, &mask);
if (irq_set_affinity_hint(irq->msi_desc->irq, &mask))
if (irq_set_affinity_hint(irq->msi_desc->irq, cpumask_of(cpu)))
dev_err(&dpio_dev->dev,
"irq_set_affinity failed irq %d cpu %d\n",
irq->msi_desc->irq, cpu);

3
drivers/tee/optee/call.c
View File

@ -534,7 +534,8 @@ void optee_free_pages_list(void *list, size_t num_entries)
static bool is_normal_memory(pgprot_t p)
{
#if defined(CONFIG_ARM)
return (pgprot_val(p) & L_PTE_MT_MASK) == L_PTE_MT_WRITEALLOC;
return (((pgprot_val(p) & L_PTE_MT_MASK) == L_PTE_MT_WRITEALLOC) ||
((pgprot_val(p) & L_PTE_MT_MASK) == L_PTE_MT_WRITEBACK));
#elif defined(CONFIG_ARM64)
return (pgprot_val(p) & PTE_ATTRINDX_MASK) == PTE_ATTRINDX(MT_NORMAL);
#else

4
include/linux/firmware/xlnx-zynqmp.h
View File

@ -50,10 +50,6 @@
#define ZYNQMP_PM_CAPABILITY_WAKEUP 0x4U
#define ZYNQMP_PM_CAPABILITY_UNUSABLE 0x8U
/* Feature check status */
#define PM_FEATURE_INVALID -1
#define PM_FEATURE_UNCHECKED 0
/*
* Firmware FPGA Manager flags
* XILINX_ZYNQMP_PM_FPGA_FULL: FPGA full reconfiguration

1
include/linux/platform_data/ti-sysc.h
View File

@ -50,6 +50,7 @@ struct sysc_regbits {
s8 emufree_shift;
};
#define SYSC_MODULE_QUIRK_ENA_RESETDONE BIT(25)
#define SYSC_MODULE_QUIRK_PRUSS BIT(24)
#define SYSC_MODULE_QUIRK_DSS_RESET BIT(23)
#define SYSC_MODULE_QUIRK_RTC_UNLOCK BIT(22)