mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-23 12:14:10 +08:00
dt-bindings: iio: dac: Add adi,ltc2664.yaml
Add documentation for ltc2664. Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Co-developed-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Kim Seer Paller <kimseer.paller@analog.com> Link: https://patch.msgid.link/20240718051834.32270-5-kimseer.paller@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This commit is contained in:
Kim Seer Paller
Jonathan Cameron
parent
cfe76601f6
commit
2f472da995
181
Documentation/devicetree/bindings/iio/dac/adi,ltc2664.yaml
Normal file
181
Documentation/devicetree/bindings/iio/dac/adi,ltc2664.yaml
Normal file
@ -0,0 +1,181 @@
|
||||
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/iio/dac/adi,ltc2664.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Analog Devices LTC2664 DAC
|
||||
|
||||
maintainers:
|
||||
- Michael Hennerich <michael.hennerich@analog.com>
|
||||
- Kim Seer Paller <kimseer.paller@analog.com>
|
||||
|
||||
description: |
|
||||
Analog Devices LTC2664 4 channel, 12-/16-Bit, +-10V DAC
|
||||
https://www.analog.com/media/en/technical-documentation/data-sheets/2664fa.pdf
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
enum:
|
||||
- adi,ltc2664
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
spi-max-frequency:
|
||||
maximum: 50000000
|
||||
|
||||
vcc-supply:
|
||||
description: Analog Supply Voltage Input.
|
||||
|
||||
v-pos-supply:
|
||||
description: Positive Supply Voltage Input.
|
||||
|
||||
v-neg-supply:
|
||||
description: Negative Supply Voltage Input.
|
||||
|
||||
iovcc-supply:
|
||||
description: Digital Input/Output Supply Voltage.
|
||||
|
||||
ref-supply:
|
||||
description:
|
||||
Reference Input/Output. The voltage at the REF pin sets the full-scale
|
||||
range of all channels. If not provided the internal reference is used and
|
||||
also provided on the VREF pin.
|
||||
|
||||
reset-gpios:
|
||||
description:
|
||||
Active-low Asynchronous Clear Input. A logic low at this level-triggered
|
||||
input clears the part to the reset code and range determined by the
|
||||
hardwired option chosen using the MSPAN pins. The control registers are
|
||||
cleared to zero.
|
||||
maxItems: 1
|
||||
|
||||
adi,manual-span-operation-config:
|
||||
description:
|
||||
This property must mimic the MSPAN pin configurations. By tying the MSPAN
|
||||
pins (MSP2, MSP1 and MSP0) to GND and/or VCC, any output range can be
|
||||
hardware-configured with different mid-scale or zero-scale reset options.
|
||||
The hardware configuration is latched during power on reset for proper
|
||||
operation.
|
||||
0 - MPS2=GND, MPS1=GND, MSP0=GND (+-10V, reset to 0V)
|
||||
1 - MPS2=GND, MPS1=GND, MSP0=VCC (+-5V, reset to 0V)
|
||||
2 - MPS2=GND, MPS1=VCC, MSP0=GND (+-2.5V, reset to 0V)
|
||||
3 - MPS2=GND, MPS1=VCC, MSP0=VCC (0V to 10, reset to 0V)
|
||||
4 - MPS2=VCC, MPS1=GND, MSP0=GND (0V to 10V, reset to 5V)
|
||||
5 - MPS2=VCC, MPS1=GND, MSP0=VCC (0V to 5V, reset to 0V)
|
||||
6 - MPS2=VCC, MPS1=VCC, MSP0=GND (0V to 5V, reset to 2.5V)
|
||||
7 - MPS2=VCC, MPS1=VCC, MSP0=VCC (0V to 5V, reset to 0V, enables SoftSpan)
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
enum: [0, 1, 2, 3, 4, 5, 6, 7]
|
||||
default: 7
|
||||
|
||||
io-channels:
|
||||
description:
|
||||
ADC channel to monitor voltages and temperature at the MUXOUT pin.
|
||||
maxItems: 1
|
||||
|
||||
'#address-cells':
|
||||
const: 1
|
||||
|
||||
'#size-cells':
|
||||
const: 0
|
||||
|
||||
patternProperties:
|
||||
"^channel@[0-3]$":
|
||||
$ref: dac.yaml
|
||||
type: object
|
||||
additionalProperties: false
|
||||
|
||||
properties:
|
||||
reg:
|
||||
description: The channel number representing the DAC output channel.
|
||||
maximum: 3
|
||||
|
||||
adi,toggle-mode:
|
||||
description:
|
||||
Set the channel as a toggle enabled channel. Toggle operation enables
|
||||
fast switching of a DAC output between two different DAC codes without
|
||||
any SPI transaction.
|
||||
type: boolean
|
||||
|
||||
output-range-microvolt:
|
||||
description:
|
||||
This property is only allowed when SoftSpan is enabled. If not present,
|
||||
[0, 5000000] is the default output range.
|
||||
oneOf:
|
||||
- items:
|
||||
- const: 0
|
||||
- enum: [5000000, 10000000]
|
||||
- items:
|
||||
- const: -5000000
|
||||
- const: 5000000
|
||||
- items:
|
||||
- const: -10000000
|
||||
- const: 10000000
|
||||
- items:
|
||||
- const: -2500000
|
||||
- const: 2500000
|
||||
|
||||
required:
|
||||
- reg
|
||||
|
||||
allOf:
|
||||
- if:
|
||||
not:
|
||||
properties:
|
||||
adi,manual-span-operation-config:
|
||||
const: 7
|
||||
then:
|
||||
patternProperties:
|
||||
"^channel@[0-3]$":
|
||||
properties:
|
||||
output-range-microvolt: false
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- spi-max-frequency
|
||||
- vcc-supply
|
||||
- iovcc-supply
|
||||
- v-pos-supply
|
||||
- v-neg-supply
|
||||
|
||||
allOf:
|
||||
- $ref: /schemas/spi/spi-peripheral-props.yaml#
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
spi {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
dac@0 {
|
||||
compatible = "adi,ltc2664";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <10000000>;
|
||||
|
||||
vcc-supply = <&vcc>;
|
||||
iovcc-supply = <&vcc>;
|
||||
ref-supply = <&vref>;
|
||||
v-pos-supply = <&vpos>;
|
||||
v-neg-supply = <&vneg>;
|
||||
|
||||
io-channels = <&adc 0>;
|
||||
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
channel@0 {
|
||||
reg = <0>;
|
||||
adi,toggle-mode;
|
||||
output-range-microvolt = <(-10000000) 10000000>;
|
||||
};
|
||||
|
||||
channel@1 {
|
||||
reg = <1>;
|
||||
output-range-microvolt= <0 10000000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
...
|
||||
@ -13273,6 +13273,14 @@ S: Maintained
|
||||
F: Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml
|
||||
F: drivers/iio/dac/ltc1660.c
|
||||
|
||||
LTC2664 IIO DAC DRIVER
|
||||
M: Michael Hennerich <michael.hennerich@analog.com>
|
||||
M: Kim Seer Paller <kimseer.paller@analog.com>
|
||||
L: linux-iio@vger.kernel.org
|
||||
S: Supported
|
||||
W: https://ez.analog.com/linux-software-drivers
|
||||
F: Documentation/devicetree/bindings/iio/dac/adi,ltc2664.yaml
|
||||
|
||||
LTC2688 IIO DAC DRIVER
|
||||
M: Nuno Sá <nuno.sa@analog.com>
|
||||
L: linux-iio@vger.kernel.org
|
||||
|
||||
Loading…
Reference in New Issue
Block a user