mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-16 08:44:21 +08:00
ARC: [TB10x] Device tree of TB100 and TB101 Development Kits
These are the device tree files for the Abilis Systems TB100 and TB101 ICs and their respective development kit PCBs. These files are committed in preparation of the following patch set which adds support for these chips to the ARC platform. Signed-off-by: Christian Ruppert <christian.ruppert@abilis.com> Signed-off-by: Pierrick Hascoet <pierrick.hascoet@abilis.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
This commit is contained in:
Christian Ruppert
Vineet Gupta
parent
a37cdacc9b
commit
2eb9504bcc
340
arch/arc/boot/dts/abilis_tb100.dtsi
Normal file
340
arch/arc/boot/dts/abilis_tb100.dtsi
Normal file
@ -0,0 +1,340 @@
|
||||
/*
|
||||
* Abilis Systems TB100 SOC device tree
|
||||
*
|
||||
* Copyright (C) Abilis Systems 2013
|
||||
*
|
||||
* Author: Christian Ruppert <christian.ruppert@abilis.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
/include/ "abilis_tb10x.dtsi"
|
||||
|
||||
/* interrupt specifiers
|
||||
* --------------------
|
||||
* 0: rising, 1: low, 2: high, 3: falling,
|
||||
*/
|
||||
|
||||
/ {
|
||||
clock-frequency = <500000000>; /* 500 MHZ */
|
||||
|
||||
soc100 {
|
||||
bus-frequency = <166666666>;
|
||||
|
||||
pll0: oscillator {
|
||||
clock-frequency = <1000000000>;
|
||||
};
|
||||
cpu_clk: clkdiv_cpu {
|
||||
clock-mult = <1>;
|
||||
clock-div = <2>;
|
||||
};
|
||||
ahb_clk: clkdiv_ahb {
|
||||
clock-mult = <1>;
|
||||
clock-div = <6>;
|
||||
};
|
||||
|
||||
iomux: iomux@FF10601c {
|
||||
/* Port 1 */
|
||||
pctl_tsin_s0: pctl-tsin-s0 { /* Serial TS-in 0 */
|
||||
pingrp = "mis0_pins";
|
||||
};
|
||||
pctl_tsin_s1: pctl-tsin-s1 { /* Serial TS-in 1 */
|
||||
pingrp = "mis1_pins";
|
||||
};
|
||||
pctl_gpio_a: pctl-gpio-a { /* GPIO bank A */
|
||||
pingrp = "gpioa_pins";
|
||||
};
|
||||
pctl_tsin_p1: pctl-tsin-p1 { /* Parallel TS-in 1 */
|
||||
pingrp = "mip1_pins";
|
||||
};
|
||||
/* Port 2 */
|
||||
pctl_tsin_s2: pctl-tsin-s2 { /* Serial TS-in 2 */
|
||||
pingrp = "mis2_pins";
|
||||
};
|
||||
pctl_tsin_s3: pctl-tsin-s3 { /* Serial TS-in 3 */
|
||||
pingrp = "mis3_pins";
|
||||
};
|
||||
pctl_gpio_c: pctl-gpio-c { /* GPIO bank C */
|
||||
pingrp = "gpioc_pins";
|
||||
};
|
||||
pctl_tsin_p3: pctl-tsin-p3 { /* Parallel TS-in 3 */
|
||||
pingrp = "mip3_pins";
|
||||
};
|
||||
/* Port 3 */
|
||||
pctl_tsin_s4: pctl-tsin-s4 { /* Serial TS-in 4 */
|
||||
pingrp = "mis4_pins";
|
||||
};
|
||||
pctl_tsin_s5: pctl-tsin-s5 { /* Serial TS-in 5 */
|
||||
pingrp = "mis5_pins";
|
||||
};
|
||||
pctl_gpio_e: pctl-gpio-e { /* GPIO bank E */
|
||||
pingrp = "gpioe_pins";
|
||||
};
|
||||
pctl_tsin_p5: pctl-tsin-p5 { /* Parallel TS-in 5 */
|
||||
pingrp = "mip5_pins";
|
||||
};
|
||||
/* Port 4 */
|
||||
pctl_tsin_s6: pctl-tsin-s6 { /* Serial TS-in 6 */
|
||||
pingrp = "mis6_pins";
|
||||
};
|
||||
pctl_tsin_s7: pctl-tsin-s7 { /* Serial TS-in 7 */
|
||||
pingrp = "mis7_pins";
|
||||
};
|
||||
pctl_gpio_g: pctl-gpio-g { /* GPIO bank G */
|
||||
pingrp = "gpiog_pins";
|
||||
};
|
||||
pctl_tsin_p7: pctl-tsin-p7 { /* Parallel TS-in 7 */
|
||||
pingrp = "mip7_pins";
|
||||
};
|
||||
/* Port 5 */
|
||||
pctl_gpio_j: pctl-gpio-j { /* GPIO bank J */
|
||||
pingrp = "gpioj_pins";
|
||||
};
|
||||
pctl_gpio_k: pctl-gpio-k { /* GPIO bank K */
|
||||
pingrp = "gpiok_pins";
|
||||
};
|
||||
pctl_ciplus: pctl-ciplus { /* CI+ interface */
|
||||
pingrp = "ciplus_pins";
|
||||
};
|
||||
pctl_mcard: pctl-mcard { /* M-Card interface */
|
||||
pingrp = "mcard_pins";
|
||||
};
|
||||
/* Port 6 */
|
||||
pctl_tsout_p: pctl-tsout-p { /* Parallel TS-out */
|
||||
pingrp = "mop_pins";
|
||||
};
|
||||
pctl_tsout_s0: pctl-tsout-s0 { /* Serial TS-out 0 */
|
||||
pingrp = "mos0_pins";
|
||||
};
|
||||
pctl_tsout_s1: pctl-tsout-s1 { /* Serial TS-out 1 */
|
||||
pingrp = "mos1_pins";
|
||||
};
|
||||
pctl_tsout_s2: pctl-tsout-s2 { /* Serial TS-out 2 */
|
||||
pingrp = "mos2_pins";
|
||||
};
|
||||
pctl_tsout_s3: pctl-tsout-s3 { /* Serial TS-out 3 */
|
||||
pingrp = "mos3_pins";
|
||||
};
|
||||
/* Port 7 */
|
||||
pctl_uart0: pctl-uart0 { /* UART 0 */
|
||||
pingrp = "uart0_pins";
|
||||
};
|
||||
pctl_uart1: pctl-uart1 { /* UART 1 */
|
||||
pingrp = "uart1_pins";
|
||||
};
|
||||
pctl_gpio_l: pctl-gpio-l { /* GPIO bank L */
|
||||
pingrp = "gpiol_pins";
|
||||
};
|
||||
pctl_gpio_m: pctl-gpio-m { /* GPIO bank M */
|
||||
pingrp = "gpiom_pins";
|
||||
};
|
||||
/* Port 8 */
|
||||
pctl_spi3: pctl-spi3 {
|
||||
pingrp = "spi3_pins";
|
||||
};
|
||||
/* Port 9 */
|
||||
pctl_spi1: pctl-spi1 {
|
||||
pingrp = "spi1_pins";
|
||||
};
|
||||
pctl_gpio_n: pctl-gpio-n {
|
||||
pingrp = "gpion_pins";
|
||||
};
|
||||
/* Unmuxed GPIOs */
|
||||
pctl_gpio_b: pctl-gpio-b {
|
||||
pingrp = "gpiob_pins";
|
||||
};
|
||||
pctl_gpio_d: pctl-gpio-d {
|
||||
pingrp = "gpiod_pins";
|
||||
};
|
||||
pctl_gpio_f: pctl-gpio-f {
|
||||
pingrp = "gpiof_pins";
|
||||
};
|
||||
pctl_gpio_h: pctl-gpio-h {
|
||||
pingrp = "gpioh_pins";
|
||||
};
|
||||
pctl_gpio_i: pctl-gpio-i {
|
||||
pingrp = "gpioi_pins";
|
||||
};
|
||||
};
|
||||
|
||||
gpioa: gpio@FF140000 {
|
||||
compatible = "abilis,tb10x-gpio";
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-parent = <&tb10x_ictl>;
|
||||
interrupts = <27 1>;
|
||||
reg = <0xFF140000 0x1000>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <1>;
|
||||
gpio-base = <0>;
|
||||
gpio-pins = <&pctl_gpio_a>;
|
||||
};
|
||||
gpiob: gpio@FF141000 {
|
||||
compatible = "abilis,tb10x-gpio";
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-parent = <&tb10x_ictl>;
|
||||
interrupts = <27 1>;
|
||||
reg = <0xFF141000 0x1000>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <1>;
|
||||
gpio-base = <3>;
|
||||
gpio-pins = <&pctl_gpio_b>;
|
||||
};
|
||||
gpioc: gpio@FF142000 {
|
||||
compatible = "abilis,tb10x-gpio";
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-parent = <&tb10x_ictl>;
|
||||
interrupts = <27 1>;
|
||||
reg = <0xFF142000 0x1000>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <1>;
|
||||
gpio-base = <5>;
|
||||
gpio-pins = <&pctl_gpio_c>;
|
||||
};
|
||||
gpiod: gpio@FF143000 {
|
||||
compatible = "abilis,tb10x-gpio";
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-parent = <&tb10x_ictl>;
|
||||
interrupts = <27 1>;
|
||||
reg = <0xFF143000 0x1000>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <1>;
|
||||
gpio-base = <8>;
|
||||
gpio-pins = <&pctl_gpio_d>;
|
||||
};
|
||||
gpioe: gpio@FF144000 {
|
||||
compatible = "abilis,tb10x-gpio";
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-parent = <&tb10x_ictl>;
|
||||
interrupts = <27 1>;
|
||||
reg = <0xFF144000 0x1000>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <1>;
|
||||
gpio-base = <10>;
|
||||
gpio-pins = <&pctl_gpio_e>;
|
||||
};
|
||||
gpiof: gpio@FF145000 {
|
||||
compatible = "abilis,tb10x-gpio";
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-parent = <&tb10x_ictl>;
|
||||
interrupts = <27 1>;
|
||||
reg = <0xFF145000 0x1000>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <1>;
|
||||
gpio-base = <13>;
|
||||
gpio-pins = <&pctl_gpio_f>;
|
||||
};
|
||||
gpiog: gpio@FF146000 {
|
||||
compatible = "abilis,tb10x-gpio";
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-parent = <&tb10x_ictl>;
|
||||
interrupts = <27 1>;
|
||||
reg = <0xFF146000 0x1000>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <1>;
|
||||
gpio-base = <15>;
|
||||
gpio-pins = <&pctl_gpio_g>;
|
||||
};
|
||||
gpioh: gpio@FF147000 {
|
||||
compatible = "abilis,tb10x-gpio";
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-parent = <&tb10x_ictl>;
|
||||
interrupts = <27 1>;
|
||||
reg = <0xFF147000 0x1000>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <1>;
|
||||
gpio-base = <18>;
|
||||
gpio-pins = <&pctl_gpio_h>;
|
||||
};
|
||||
gpioi: gpio@FF148000 {
|
||||
compatible = "abilis,tb10x-gpio";
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-parent = <&tb10x_ictl>;
|
||||
interrupts = <27 1>;
|
||||
reg = <0xFF148000 0x1000>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <1>;
|
||||
gpio-base = <20>;
|
||||
gpio-pins = <&pctl_gpio_i>;
|
||||
};
|
||||
gpioj: gpio@FF149000 {
|
||||
compatible = "abilis,tb10x-gpio";
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-parent = <&tb10x_ictl>;
|
||||
interrupts = <27 1>;
|
||||
reg = <0xFF149000 0x1000>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <1>;
|
||||
gpio-base = <32>;
|
||||
gpio-pins = <&pctl_gpio_j>;
|
||||
};
|
||||
gpiok: gpio@FF14a000 {
|
||||
compatible = "abilis,tb10x-gpio";
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-parent = <&tb10x_ictl>;
|
||||
interrupts = <27 1>;
|
||||
reg = <0xFF14A000 0x1000>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <1>;
|
||||
gpio-base = <64>;
|
||||
gpio-pins = <&pctl_gpio_k>;
|
||||
};
|
||||
gpiol: gpio@FF14b000 {
|
||||
compatible = "abilis,tb10x-gpio";
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-parent = <&tb10x_ictl>;
|
||||
interrupts = <27 1>;
|
||||
reg = <0xFF14B000 0x1000>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <1>;
|
||||
gpio-base = <86>;
|
||||
gpio-pins = <&pctl_gpio_l>;
|
||||
};
|
||||
gpiom: gpio@FF14c000 {
|
||||
compatible = "abilis,tb10x-gpio";
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-parent = <&tb10x_ictl>;
|
||||
interrupts = <27 1>;
|
||||
reg = <0xFF14C000 0x1000>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <1>;
|
||||
gpio-base = <90>;
|
||||
gpio-pins = <&pctl_gpio_m>;
|
||||
};
|
||||
gpion: gpio@FF14d000 {
|
||||
compatible = "abilis,tb10x-gpio";
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-parent = <&tb10x_ictl>;
|
||||
interrupts = <27 1>;
|
||||
reg = <0xFF14D000 0x1000>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <1>;
|
||||
gpio-base = <94>;
|
||||
gpio-pins = <&pctl_gpio_n>;
|
||||
};
|
||||
};
|
||||
};
|
||||
127
arch/arc/boot/dts/abilis_tb100_dvk.dts
Normal file
127
arch/arc/boot/dts/abilis_tb100_dvk.dts
Normal file
@ -0,0 +1,127 @@
|
||||
/*
|
||||
* Abilis Systems TB100 Development Kit PCB device tree
|
||||
*
|
||||
* Copyright (C) Abilis Systems 2013
|
||||
*
|
||||
* Author: Christian Ruppert <christian.ruppert@abilis.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
/include/ "abilis_tb100.dtsi"
|
||||
|
||||
/ {
|
||||
chosen {
|
||||
bootargs = "earlycon=uart8250,mmio32,0xff100000,9600n8 console=ttyS0,9600n8";
|
||||
};
|
||||
|
||||
aliases { };
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0x80000000 0x08000000>; /* 128M */
|
||||
};
|
||||
|
||||
soc100 {
|
||||
uart@FF100000 {
|
||||
pinctrl-names = "abilis,simple-default";
|
||||
pinctrl-0 = <&pctl_uart0>;
|
||||
};
|
||||
ethernet@FE100000 {
|
||||
phy-mode = "rgmii";
|
||||
};
|
||||
|
||||
i2c0: i2c@FF120000 {
|
||||
sda-hold-time = <432>;
|
||||
};
|
||||
i2c1: i2c@FF121000 {
|
||||
sda-hold-time = <432>;
|
||||
};
|
||||
i2c2: i2c@FF122000 {
|
||||
sda-hold-time = <432>;
|
||||
};
|
||||
i2c3: i2c@FF123000 {
|
||||
sda-hold-time = <432>;
|
||||
};
|
||||
i2c4: i2c@FF124000 {
|
||||
sda-hold-time = <432>;
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
power {
|
||||
label = "Power";
|
||||
gpios = <&gpioi 0>;
|
||||
linux,default-trigger = "default-on";
|
||||
};
|
||||
heartbeat {
|
||||
label = "Heartbeat";
|
||||
gpios = <&gpioi 1>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
};
|
||||
led2 {
|
||||
label = "LED2";
|
||||
gpios = <&gpioi 2>;
|
||||
default-state = "off";
|
||||
};
|
||||
led3 {
|
||||
label = "LED3";
|
||||
gpios = <&gpioi 3>;
|
||||
default-state = "off";
|
||||
};
|
||||
led4 {
|
||||
label = "LED4";
|
||||
gpios = <&gpioi 4>;
|
||||
default-state = "off";
|
||||
};
|
||||
led5 {
|
||||
label = "LED5";
|
||||
gpios = <&gpioi 5>;
|
||||
default-state = "off";
|
||||
};
|
||||
led6 {
|
||||
label = "LED6";
|
||||
gpios = <&gpioi 6>;
|
||||
default-state = "off";
|
||||
};
|
||||
led7 {
|
||||
label = "LED7";
|
||||
gpios = <&gpioi 7>;
|
||||
default-state = "off";
|
||||
};
|
||||
led8 {
|
||||
label = "LED8";
|
||||
gpios = <&gpioi 8>;
|
||||
default-state = "off";
|
||||
};
|
||||
led9 {
|
||||
label = "LED9";
|
||||
gpios = <&gpioi 9>;
|
||||
default-state = "off";
|
||||
};
|
||||
led10 {
|
||||
label = "LED10";
|
||||
gpios = <&gpioi 10>;
|
||||
default-state = "off";
|
||||
};
|
||||
led11 {
|
||||
label = "LED11";
|
||||
gpios = <&gpioi 11>;
|
||||
default-state = "off";
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
349
arch/arc/boot/dts/abilis_tb101.dtsi
Normal file
349
arch/arc/boot/dts/abilis_tb101.dtsi
Normal file
@ -0,0 +1,349 @@
|
||||
/*
|
||||
* Abilis Systems TB101 SOC device tree
|
||||
*
|
||||
* Copyright (C) Abilis Systems 2013
|
||||
*
|
||||
* Author: Christian Ruppert <christian.ruppert@abilis.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
/include/ "abilis_tb10x.dtsi"
|
||||
|
||||
/* interrupt specifiers
|
||||
* --------------------
|
||||
* 0: rising, 1: low, 2: high, 3: falling,
|
||||
*/
|
||||
|
||||
/ {
|
||||
clock-frequency = <500000000>; /* 500 MHZ */
|
||||
|
||||
soc100 {
|
||||
bus-frequency = <166666666>;
|
||||
|
||||
pll0: oscillator {
|
||||
clock-frequency = <1000000000>;
|
||||
};
|
||||
cpu_clk: clkdiv_cpu {
|
||||
clock-mult = <1>;
|
||||
clock-div = <2>;
|
||||
};
|
||||
ahb_clk: clkdiv_ahb {
|
||||
clock-mult = <1>;
|
||||
clock-div = <6>;
|
||||
};
|
||||
|
||||
iomux: iomux@FF10601c {
|
||||
/* Port 1 */
|
||||
pctl_tsin_s0: pctl-tsin-s0 { /* Serial TS-in 0 */
|
||||
pingrp = "mis0_pins";
|
||||
};
|
||||
pctl_tsin_s1: pctl-tsin-s1 { /* Serial TS-in 1 */
|
||||
pingrp = "mis1_pins";
|
||||
};
|
||||
pctl_gpio_a: pctl-gpio-a { /* GPIO bank A */
|
||||
pingrp = "gpioa_pins";
|
||||
};
|
||||
pctl_tsin_p1: pctl-tsin-p1 { /* Parallel TS-in 1 */
|
||||
pingrp = "mip1_pins";
|
||||
};
|
||||
/* Port 2 */
|
||||
pctl_tsin_s2: pctl-tsin-s2 { /* Serial TS-in 2 */
|
||||
pingrp = "mis2_pins";
|
||||
};
|
||||
pctl_tsin_s3: pctl-tsin-s3 { /* Serial TS-in 3 */
|
||||
pingrp = "mis3_pins";
|
||||
};
|
||||
pctl_gpio_c: pctl-gpio-c { /* GPIO bank C */
|
||||
pingrp = "gpioc_pins";
|
||||
};
|
||||
pctl_tsin_p3: pctl-tsin-p3 { /* Parallel TS-in 3 */
|
||||
pingrp = "mip3_pins";
|
||||
};
|
||||
/* Port 3 */
|
||||
pctl_tsin_s4: pctl-tsin-s4 { /* Serial TS-in 4 */
|
||||
pingrp = "mis4_pins";
|
||||
};
|
||||
pctl_tsin_s5: pctl-tsin-s5 { /* Serial TS-in 5 */
|
||||
pingrp = "mis5_pins";
|
||||
};
|
||||
pctl_gpio_e: pctl-gpio-e { /* GPIO bank E */
|
||||
pingrp = "gpioe_pins";
|
||||
};
|
||||
pctl_tsin_p5: pctl-tsin-p5 { /* Parallel TS-in 5 */
|
||||
pingrp = "mip5_pins";
|
||||
};
|
||||
/* Port 4 */
|
||||
pctl_tsin_s6: pctl-tsin-s6 { /* Serial TS-in 6 */
|
||||
pingrp = "mis6_pins";
|
||||
};
|
||||
pctl_tsin_s7: pctl-tsin-s7 { /* Serial TS-in 7 */
|
||||
pingrp = "mis7_pins";
|
||||
};
|
||||
pctl_gpio_g: pctl-gpio-g { /* GPIO bank G */
|
||||
pingrp = "gpiog_pins";
|
||||
};
|
||||
pctl_tsin_p7: pctl-tsin-p7 { /* Parallel TS-in 7 */
|
||||
pingrp = "mip7_pins";
|
||||
};
|
||||
/* Port 5 */
|
||||
pctl_gpio_j: pctl-gpio-j { /* GPIO bank J */
|
||||
pingrp = "gpioj_pins";
|
||||
};
|
||||
pctl_gpio_k: pctl-gpio-k { /* GPIO bank K */
|
||||
pingrp = "gpiok_pins";
|
||||
};
|
||||
pctl_ciplus: pctl-ciplus { /* CI+ interface */
|
||||
pingrp = "ciplus_pins";
|
||||
};
|
||||
pctl_mcard: pctl-mcard { /* M-Card interface */
|
||||
pingrp = "mcard_pins";
|
||||
};
|
||||
pctl_stc0: pctl-stc0 { /* Smart card I/F 0 */
|
||||
pingrp = "stc0_pins";
|
||||
};
|
||||
pctl_stc1: pctl-stc1 { /* Smart card I/F 1 */
|
||||
pingrp = "stc1_pins";
|
||||
};
|
||||
/* Port 6 */
|
||||
pctl_tsout_p: pctl-tsout-p { /* Parallel TS-out */
|
||||
pingrp = "mop_pins";
|
||||
};
|
||||
pctl_tsout_s0: pctl-tsout-s0 { /* Serial TS-out 0 */
|
||||
pingrp = "mos0_pins";
|
||||
};
|
||||
pctl_tsout_s1: pctl-tsout-s1 { /* Serial TS-out 1 */
|
||||
pingrp = "mos1_pins";
|
||||
};
|
||||
pctl_tsout_s2: pctl-tsout-s2 { /* Serial TS-out 2 */
|
||||
pingrp = "mos2_pins";
|
||||
};
|
||||
pctl_tsout_s3: pctl-tsout-s3 { /* Serial TS-out 3 */
|
||||
pingrp = "mos3_pins";
|
||||
};
|
||||
/* Port 7 */
|
||||
pctl_uart0: pctl-uart0 { /* UART 0 */
|
||||
pingrp = "uart0_pins";
|
||||
};
|
||||
pctl_uart1: pctl-uart1 { /* UART 1 */
|
||||
pingrp = "uart1_pins";
|
||||
};
|
||||
pctl_gpio_l: pctl-gpio-l { /* GPIO bank L */
|
||||
pingrp = "gpiol_pins";
|
||||
};
|
||||
pctl_gpio_m: pctl-gpio-m { /* GPIO bank M */
|
||||
pingrp = "gpiom_pins";
|
||||
};
|
||||
/* Port 8 */
|
||||
pctl_spi3: pctl-spi3 {
|
||||
pingrp = "spi3_pins";
|
||||
};
|
||||
pctl_jtag: pctl-jtag {
|
||||
pingrp = "jtag_pins";
|
||||
};
|
||||
/* Port 9 */
|
||||
pctl_spi1: pctl-spi1 {
|
||||
pingrp = "spi1_pins";
|
||||
};
|
||||
pctl_gpio_n: pctl-gpio-n {
|
||||
pingrp = "gpion_pins";
|
||||
};
|
||||
/* Unmuxed GPIOs */
|
||||
pctl_gpio_b: pctl-gpio-b {
|
||||
pingrp = "gpiob_pins";
|
||||
};
|
||||
pctl_gpio_d: pctl-gpio-d {
|
||||
pingrp = "gpiod_pins";
|
||||
};
|
||||
pctl_gpio_f: pctl-gpio-f {
|
||||
pingrp = "gpiof_pins";
|
||||
};
|
||||
pctl_gpio_h: pctl-gpio-h {
|
||||
pingrp = "gpioh_pins";
|
||||
};
|
||||
pctl_gpio_i: pctl-gpio-i {
|
||||
pingrp = "gpioi_pins";
|
||||
};
|
||||
};
|
||||
|
||||
gpioa: gpio@FF140000 {
|
||||
compatible = "abilis,tb10x-gpio";
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-parent = <&tb10x_ictl>;
|
||||
interrupts = <27 1>;
|
||||
reg = <0xFF140000 0x1000>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <1>;
|
||||
gpio-base = <0>;
|
||||
gpio-pins = <&pctl_gpio_a>;
|
||||
};
|
||||
gpiob: gpio@FF141000 {
|
||||
compatible = "abilis,tb10x-gpio";
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-parent = <&tb10x_ictl>;
|
||||
interrupts = <27 1>;
|
||||
reg = <0xFF141000 0x1000>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <1>;
|
||||
gpio-base = <3>;
|
||||
gpio-pins = <&pctl_gpio_b>;
|
||||
};
|
||||
gpioc: gpio@FF142000 {
|
||||
compatible = "abilis,tb10x-gpio";
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-parent = <&tb10x_ictl>;
|
||||
interrupts = <27 1>;
|
||||
reg = <0xFF142000 0x1000>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <1>;
|
||||
gpio-base = <5>;
|
||||
gpio-pins = <&pctl_gpio_c>;
|
||||
};
|
||||
gpiod: gpio@FF143000 {
|
||||
compatible = "abilis,tb10x-gpio";
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-parent = <&tb10x_ictl>;
|
||||
interrupts = <27 1>;
|
||||
reg = <0xFF143000 0x1000>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <1>;
|
||||
gpio-base = <8>;
|
||||
gpio-pins = <&pctl_gpio_d>;
|
||||
};
|
||||
gpioe: gpio@FF144000 {
|
||||
compatible = "abilis,tb10x-gpio";
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-parent = <&tb10x_ictl>;
|
||||
interrupts = <27 1>;
|
||||
reg = <0xFF144000 0x1000>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <1>;
|
||||
gpio-base = <10>;
|
||||
gpio-pins = <&pctl_gpio_e>;
|
||||
};
|
||||
gpiof: gpio@FF145000 {
|
||||
compatible = "abilis,tb10x-gpio";
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-parent = <&tb10x_ictl>;
|
||||
interrupts = <27 1>;
|
||||
reg = <0xFF145000 0x1000>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <1>;
|
||||
gpio-base = <13>;
|
||||
gpio-pins = <&pctl_gpio_f>;
|
||||
};
|
||||
gpiog: gpio@FF146000 {
|
||||
compatible = "abilis,tb10x-gpio";
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-parent = <&tb10x_ictl>;
|
||||
interrupts = <27 1>;
|
||||
reg = <0xFF146000 0x1000>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <1>;
|
||||
gpio-base = <15>;
|
||||
gpio-pins = <&pctl_gpio_g>;
|
||||
};
|
||||
gpioh: gpio@FF147000 {
|
||||
compatible = "abilis,tb10x-gpio";
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-parent = <&tb10x_ictl>;
|
||||
interrupts = <27 1>;
|
||||
reg = <0xFF147000 0x1000>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <1>;
|
||||
gpio-base = <18>;
|
||||
gpio-pins = <&pctl_gpio_h>;
|
||||
};
|
||||
gpioi: gpio@FF148000 {
|
||||
compatible = "abilis,tb10x-gpio";
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-parent = <&tb10x_ictl>;
|
||||
interrupts = <27 1>;
|
||||
reg = <0xFF148000 0x1000>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <1>;
|
||||
gpio-base = <20>;
|
||||
gpio-pins = <&pctl_gpio_i>;
|
||||
};
|
||||
gpioj: gpio@FF149000 {
|
||||
compatible = "abilis,tb10x-gpio";
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-parent = <&tb10x_ictl>;
|
||||
interrupts = <27 1>;
|
||||
reg = <0xFF149000 0x1000>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <1>;
|
||||
gpio-base = <32>;
|
||||
gpio-pins = <&pctl_gpio_j>;
|
||||
};
|
||||
gpiok: gpio@FF14a000 {
|
||||
compatible = "abilis,tb10x-gpio";
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-parent = <&tb10x_ictl>;
|
||||
interrupts = <27 1>;
|
||||
reg = <0xFF14A000 0x1000>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <1>;
|
||||
gpio-base = <64>;
|
||||
gpio-pins = <&pctl_gpio_k>;
|
||||
};
|
||||
gpiol: gpio@FF14b000 {
|
||||
compatible = "abilis,tb10x-gpio";
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-parent = <&tb10x_ictl>;
|
||||
interrupts = <27 1>;
|
||||
reg = <0xFF14B000 0x1000>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <1>;
|
||||
gpio-base = <86>;
|
||||
gpio-pins = <&pctl_gpio_l>;
|
||||
};
|
||||
gpiom: gpio@FF14c000 {
|
||||
compatible = "abilis,tb10x-gpio";
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-parent = <&tb10x_ictl>;
|
||||
interrupts = <27 1>;
|
||||
reg = <0xFF14C000 0x1000>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <1>;
|
||||
gpio-base = <90>;
|
||||
gpio-pins = <&pctl_gpio_m>;
|
||||
};
|
||||
gpion: gpio@FF14d000 {
|
||||
compatible = "abilis,tb10x-gpio";
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-parent = <&tb10x_ictl>;
|
||||
interrupts = <27 1>;
|
||||
reg = <0xFF14D000 0x1000>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <1>;
|
||||
gpio-base = <94>;
|
||||
gpio-pins = <&pctl_gpio_n>;
|
||||
};
|
||||
};
|
||||
};
|
||||
127
arch/arc/boot/dts/abilis_tb101_dvk.dts
Normal file
127
arch/arc/boot/dts/abilis_tb101_dvk.dts
Normal file
@ -0,0 +1,127 @@
|
||||
/*
|
||||
* Abilis Systems TB101 Development Kit PCB device tree
|
||||
*
|
||||
* Copyright (C) Abilis Systems 2013
|
||||
*
|
||||
* Author: Christian Ruppert <christian.ruppert@abilis.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
/include/ "abilis_tb101.dtsi"
|
||||
|
||||
/ {
|
||||
chosen {
|
||||
bootargs = "earlycon=uart8250,mmio32,0xff100000,9600n8 console=ttyS0,9600n8";
|
||||
};
|
||||
|
||||
aliases { };
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0x80000000 0x08000000>; /* 128M */
|
||||
};
|
||||
|
||||
soc100 {
|
||||
uart@FF100000 {
|
||||
pinctrl-names = "abilis,simple-default";
|
||||
pinctrl-0 = <&pctl_uart0>;
|
||||
};
|
||||
ethernet@FE100000 {
|
||||
phy-mode = "rgmii";
|
||||
};
|
||||
|
||||
i2c0: i2c@FF120000 {
|
||||
sda-hold-time = <432>;
|
||||
};
|
||||
i2c1: i2c@FF121000 {
|
||||
sda-hold-time = <432>;
|
||||
};
|
||||
i2c2: i2c@FF122000 {
|
||||
sda-hold-time = <432>;
|
||||
};
|
||||
i2c3: i2c@FF123000 {
|
||||
sda-hold-time = <432>;
|
||||
};
|
||||
i2c4: i2c@FF124000 {
|
||||
sda-hold-time = <432>;
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
power {
|
||||
label = "Power";
|
||||
gpios = <&gpioi 0>;
|
||||
linux,default-trigger = "default-on";
|
||||
};
|
||||
heartbeat {
|
||||
label = "Heartbeat";
|
||||
gpios = <&gpioi 1>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
};
|
||||
led2 {
|
||||
label = "LED2";
|
||||
gpios = <&gpioi 2>;
|
||||
default-state = "off";
|
||||
};
|
||||
led3 {
|
||||
label = "LED3";
|
||||
gpios = <&gpioi 3>;
|
||||
default-state = "off";
|
||||
};
|
||||
led4 {
|
||||
label = "LED4";
|
||||
gpios = <&gpioi 4>;
|
||||
default-state = "off";
|
||||
};
|
||||
led5 {
|
||||
label = "LED5";
|
||||
gpios = <&gpioi 5>;
|
||||
default-state = "off";
|
||||
};
|
||||
led6 {
|
||||
label = "LED6";
|
||||
gpios = <&gpioi 6>;
|
||||
default-state = "off";
|
||||
};
|
||||
led7 {
|
||||
label = "LED7";
|
||||
gpios = <&gpioi 7>;
|
||||
default-state = "off";
|
||||
};
|
||||
led8 {
|
||||
label = "LED8";
|
||||
gpios = <&gpioi 8>;
|
||||
default-state = "off";
|
||||
};
|
||||
led9 {
|
||||
label = "LED9";
|
||||
gpios = <&gpioi 9>;
|
||||
default-state = "off";
|
||||
};
|
||||
led10 {
|
||||
label = "LED10";
|
||||
gpios = <&gpioi 10>;
|
||||
default-state = "off";
|
||||
};
|
||||
led11 {
|
||||
label = "LED11";
|
||||
gpios = <&gpioi 11>;
|
||||
default-state = "off";
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
247
arch/arc/boot/dts/abilis_tb10x.dtsi
Normal file
247
arch/arc/boot/dts/abilis_tb10x.dtsi
Normal file
@ -0,0 +1,247 @@
|
||||
/*
|
||||
* Abilis Systems TB10X SOC device tree
|
||||
*
|
||||
* Copyright (C) Abilis Systems 2013
|
||||
*
|
||||
* Author: Christian Ruppert <christian.ruppert@abilis.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
/* interrupt specifiers
|
||||
* --------------------
|
||||
* 0: rising, 1: low, 2: high, 3: falling,
|
||||
*/
|
||||
|
||||
/ {
|
||||
compatible = "abilis,arc-tb10x";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
cpus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
cpu@0 {
|
||||
device_type = "cpu";
|
||||
compatible = "snps,arc770d";
|
||||
reg = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
soc100 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
device_type = "soc";
|
||||
ranges = <0xfe000000 0xfe000000 0x02000000
|
||||
0x000F0000 0x000F0000 0x00010000>;
|
||||
compatible = "abilis,tb10x", "simple-bus";
|
||||
|
||||
pll0: oscillator {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-output-names = "pll0";
|
||||
};
|
||||
cpu_clk: clkdiv_cpu {
|
||||
compatible = "fixed-factor-clkdiv";
|
||||
#clock-cells = <0>;
|
||||
clocks = <&pll0>;
|
||||
clock-output-names = "cpu_clk";
|
||||
};
|
||||
ahb_clk: clkdiv_ahb {
|
||||
compatible = "fixed-factor-clkdiv";
|
||||
#clock-cells = <0>;
|
||||
clocks = <&pll0>;
|
||||
clock-output-names = "ahb_clk";
|
||||
};
|
||||
|
||||
iomux: iomux@FF10601c {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "abilis,tb10x-iomux";
|
||||
reg = <0xFF10601c 0x4>;
|
||||
};
|
||||
|
||||
intc: interrupt-controller {
|
||||
compatible = "snps,arc700-intc";
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
};
|
||||
tb10x_ictl: pic@fe002000 {
|
||||
compatible = "abilis,tb10x_ictl";
|
||||
reg = <0xFE002000 0x20>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
interrupt-parent = <&intc>;
|
||||
interrupts = <5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
|
||||
20 21 22 23 24 25 26 27 28 29 30 31>;
|
||||
};
|
||||
|
||||
uart@FF100000 {
|
||||
compatible = "snps,dw-apb-uart",
|
||||
"abilis,simple-pinctrl";
|
||||
reg = <0xFF100000 0x100>;
|
||||
clock-frequency = <166666666>;
|
||||
interrupts = <25 1>;
|
||||
reg-shift = <2>;
|
||||
reg-io-width = <4>;
|
||||
interrupt-parent = <&tb10x_ictl>;
|
||||
};
|
||||
ethernet@FE100000 {
|
||||
compatible = "snps,dwmac-3.70a","snps,dwmac";
|
||||
reg = <0xFE100000 0x1058>;
|
||||
interrupt-parent = <&tb10x_ictl>;
|
||||
interrupts = <6 1>;
|
||||
interrupt-names = "macirq";
|
||||
clocks = <&ahb_clk>;
|
||||
clock-names = "stmmaceth";
|
||||
};
|
||||
dma@FE000000 {
|
||||
compatible = "snps,dma-spear1340";
|
||||
reg = <0xFE000000 0x400>;
|
||||
interrupt-parent = <&tb10x_ictl>;
|
||||
interrupts = <14 1>;
|
||||
dma-channels = <6>;
|
||||
dma-requests = <0>;
|
||||
dma-masters = <1>;
|
||||
#dma-cells = <3>;
|
||||
chan_allocation_order = <0>;
|
||||
chan_priority = <1>;
|
||||
block_size = <0x7ff>;
|
||||
data_width = <2 0 0 0>;
|
||||
clocks = <&ahb_clk>;
|
||||
clock-names = "hclk";
|
||||
};
|
||||
|
||||
i2c0: i2c@FF120000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "snps,designware-i2c";
|
||||
reg = <0xFF120000 0x1000>;
|
||||
interrupt-parent = <&tb10x_ictl>;
|
||||
interrupts = <12 1>;
|
||||
clocks = <&ahb_clk>;
|
||||
};
|
||||
i2c1: i2c@FF121000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "snps,designware-i2c";
|
||||
reg = <0xFF121000 0x1000>;
|
||||
interrupt-parent = <&tb10x_ictl>;
|
||||
interrupts = <12 1>;
|
||||
clocks = <&ahb_clk>;
|
||||
};
|
||||
i2c2: i2c@FF122000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "snps,designware-i2c";
|
||||
reg = <0xFF122000 0x1000>;
|
||||
interrupt-parent = <&tb10x_ictl>;
|
||||
interrupts = <12 1>;
|
||||
clocks = <&ahb_clk>;
|
||||
};
|
||||
i2c3: i2c@FF123000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "snps,designware-i2c";
|
||||
reg = <0xFF123000 0x1000>;
|
||||
interrupt-parent = <&tb10x_ictl>;
|
||||
interrupts = <12 1>;
|
||||
clocks = <&ahb_clk>;
|
||||
};
|
||||
i2c4: i2c@FF124000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "snps,designware-i2c";
|
||||
reg = <0xFF124000 0x1000>;
|
||||
interrupt-parent = <&tb10x_ictl>;
|
||||
interrupts = <12 1>;
|
||||
clocks = <&ahb_clk>;
|
||||
};
|
||||
|
||||
spi0: spi@0xFE010000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
cell-index = <0>;
|
||||
compatible = "abilis,tb100-spi";
|
||||
num-cs = <1>;
|
||||
reg = <0xFE010000 0x20>;
|
||||
interrupt-parent = <&tb10x_ictl>;
|
||||
interrupts = <26 1>;
|
||||
clocks = <&ahb_clk>;
|
||||
};
|
||||
spi1: spi@0xFE011000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
cell-index = <1>;
|
||||
compatible = "abilis,tb100-spi",
|
||||
"abilis,simple-pinctrl";
|
||||
num-cs = <2>;
|
||||
reg = <0xFE011000 0x20>;
|
||||
interrupt-parent = <&tb10x_ictl>;
|
||||
interrupts = <10 1>;
|
||||
clocks = <&ahb_clk>;
|
||||
};
|
||||
|
||||
tb10x_tsm: tb10x-tsm@ff316000 {
|
||||
compatible = "abilis,tb100-tsm";
|
||||
reg = <0xff316000 0x400>;
|
||||
interrupt-parent = <&tb10x_ictl>;
|
||||
interrupts = <17 1>;
|
||||
output-clkdiv = <4>;
|
||||
global-packet-delay = <0x21>;
|
||||
port-packet-delay = <0>;
|
||||
};
|
||||
tb10x_stream_proc: tb10x-stream-proc {
|
||||
compatible = "abilis,tb100-streamproc";
|
||||
reg = <0xfff00000 0x200>,
|
||||
<0x000f0000 0x10000>,
|
||||
<0xfff00200 0x105>,
|
||||
<0xff10600c 0x1>,
|
||||
<0xfe001018 0x1>;
|
||||
reg-names = "mbox",
|
||||
"sp_iccm",
|
||||
"mbox_irq",
|
||||
"cpuctrl",
|
||||
"a6it_int_force";
|
||||
interrupt-parent = <&tb10x_ictl>;
|
||||
interrupts = <20 1>, <19 1>;
|
||||
interrupt-names = "cmd_irq", "event_irq";
|
||||
};
|
||||
tb10x_mdsc0: tb10x-mdscr@FF300000 {
|
||||
compatible = "abilis,tb100-mdscr";
|
||||
reg = <0xFF300000 0x7000>;
|
||||
tb100-mdscr-manage-tsin;
|
||||
};
|
||||
tb10x_mscr0: tb10x-mdscr@FF307000 {
|
||||
compatible = "abilis,tb100-mdscr";
|
||||
reg = <0xFF307000 0x7000>;
|
||||
};
|
||||
tb10x_scr0: tb10x-mdscr@ff30e000 {
|
||||
compatible = "abilis,tb100-mdscr";
|
||||
reg = <0xFF30e000 0x4000>;
|
||||
tb100-mdscr-manage-tsin;
|
||||
};
|
||||
tb10x_scr1: tb10x-mdscr@ff312000 {
|
||||
compatible = "abilis,tb100-mdscr";
|
||||
reg = <0xFF312000 0x4000>;
|
||||
tb100-mdscr-manage-tsin;
|
||||
};
|
||||
tb10x_wfb: tb10x-wfb@ff319000 {
|
||||
compatible = "abilis,tb100-wfb";
|
||||
reg = <0xff319000 0x1000>;
|
||||
interrupt-parent = <&tb10x_ictl>;
|
||||
interrupts = <16 1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
Loading…
Reference in New Issue
Block a user