mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-11 20:48:49 +08:00
[PATCH] SPI: add spi_butterfly driver
This adds a bitbanging parport based adaptor cable for AVR Butterfly, giving SPI links to its DataFlash chip and (eventually) firmware running in the card. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This commit is contained in:
David Brownell
Greg Kroah-Hartman
parent
5d870c8e21
commit
2e10c84b9c
57
Documentation/spi/butterfly
Normal file
57
Documentation/spi/butterfly
Normal file
@ -0,0 +1,57 @@
|
||||
spi_butterfly - parport-to-butterfly adapter driver
|
||||
===================================================
|
||||
|
||||
This is a hardware and software project that includes building and using
|
||||
a parallel port adapter cable, together with an "AVR Butterfly" to run
|
||||
firmware for user interfacing and/or sensors. A Butterfly is a $US20
|
||||
battery powered card with an AVR microcontroller and lots of goodies:
|
||||
sensors, LCD, flash, toggle stick, and more. You can use AVR-GCC to
|
||||
develop firmware for this, and flash it using this adapter cable.
|
||||
|
||||
You can make this adapter from an old printer cable and solder things
|
||||
directly to the Butterfly. Or (if you have the parts and skills) you
|
||||
can come up with something fancier, providing ciruit protection to the
|
||||
Butterfly and the printer port, or with a better power supply than two
|
||||
signal pins from the printer port.
|
||||
|
||||
|
||||
The first cable connections will hook Linux up to one SPI bus, with the
|
||||
AVR and a DataFlash chip; and to the AVR reset line. This is all you
|
||||
need to reflash the firmware, and the pins are the standard Atmel "ISP"
|
||||
connector pins (used also on non-Butterfly AVR boards).
|
||||
|
||||
Signal Butterfly Parport (DB-25)
|
||||
------ --------- ---------------
|
||||
SCK = J403.PB1/SCK = pin 2/D0
|
||||
RESET = J403.nRST = pin 3/D1
|
||||
VCC = J403.VCC_EXT = pin 8/D6
|
||||
MOSI = J403.PB2/MOSI = pin 9/D7
|
||||
MISO = J403.PB3/MISO = pin 11/S7,nBUSY
|
||||
GND = J403.GND = pin 23/GND
|
||||
|
||||
Then to let Linux master that bus to talk to the DataFlash chip, you must
|
||||
(a) flash new firmware that disables SPI (set PRR.2, and disable pullups
|
||||
by clearing PORTB.[0-3]); (b) configure the mtd_dataflash driver; and
|
||||
(c) cable in the chipselect.
|
||||
|
||||
Signal Butterfly Parport (DB-25)
|
||||
------ --------- ---------------
|
||||
VCC = J400.VCC_EXT = pin 7/D5
|
||||
SELECT = J400.PB0/nSS = pin 17/C3,nSELECT
|
||||
GND = J400.GND = pin 24/GND
|
||||
|
||||
The "USI" controller, using J405, can be used for a second SPI bus. That
|
||||
would let you talk to the AVR over SPI, running firmware that makes it act
|
||||
as an SPI slave, while letting either Linux or the AVR use the DataFlash.
|
||||
There are plenty of spare parport pins to wire this one up, such as:
|
||||
|
||||
Signal Butterfly Parport (DB-25)
|
||||
------ --------- ---------------
|
||||
SCK = J403.PE4/USCK = pin 5/D3
|
||||
MOSI = J403.PE5/DI = pin 6/D4
|
||||
MISO = J403.PE6/DO = pin 12/S5,nPAPEROUT
|
||||
GND = J403.GND = pin 22/GND
|
||||
|
||||
IRQ = J402.PF4 = pin 10/S6,ACK
|
||||
GND = J402.GND(P2) = pin 25/GND
|
||||
|
||||
@ -75,6 +75,16 @@ config SPI_BUTTERFLY
|
||||
inexpensive battery powered microcontroller evaluation board.
|
||||
This same cable can be used to flash new firmware.
|
||||
|
||||
config SPI_BUTTERFLY
|
||||
tristate "Parallel port adapter for AVR Butterfly (DEVELOPMENT)"
|
||||
depends on SPI_MASTER && PARPORT && EXPERIMENTAL
|
||||
select SPI_BITBANG
|
||||
help
|
||||
This uses a custom parallel port cable to connect to an AVR
|
||||
Butterfly <http://www.atmel.com/products/avr/butterfly>, an
|
||||
inexpensive battery powered microcontroller evaluation board.
|
||||
This same cable can be used to flash new firmware.
|
||||
|
||||
#
|
||||
# Add new SPI master controllers in alphabetical order above this line
|
||||
#
|
||||
|
||||
423
drivers/spi/spi_butterfly.c
Normal file
423
drivers/spi/spi_butterfly.c
Normal file
@ -0,0 +1,423 @@
|
||||
/*
|
||||
* spi_butterfly.c - parport-to-butterfly adapter
|
||||
*
|
||||
* Copyright (C) 2005 David Brownell
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
||||
*/
|
||||
#include <linux/config.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/parport.h>
|
||||
|
||||
#include <linux/spi/spi.h>
|
||||
#include <linux/spi/spi_bitbang.h>
|
||||
#include <linux/spi/flash.h>
|
||||
|
||||
#include <linux/mtd/partitions.h>
|
||||
|
||||
|
||||
/*
|
||||
* This uses SPI to talk with an "AVR Butterfly", which is a $US20 card
|
||||
* with a battery powered AVR microcontroller and lots of goodies. You
|
||||
* can use GCC to develop firmware for this.
|
||||
*
|
||||
* See Documentation/spi/butterfly for information about how to build
|
||||
* and use this custom parallel port cable.
|
||||
*/
|
||||
|
||||
#undef HAVE_USI /* nyet */
|
||||
|
||||
|
||||
/* DATA output bits (pins 2..9 == D0..D7) */
|
||||
#define butterfly_nreset (1 << 1) /* pin 3 */
|
||||
|
||||
#define spi_sck_bit (1 << 0) /* pin 2 */
|
||||
#define spi_mosi_bit (1 << 7) /* pin 9 */
|
||||
|
||||
#define usi_sck_bit (1 << 3) /* pin 5 */
|
||||
#define usi_mosi_bit (1 << 4) /* pin 6 */
|
||||
|
||||
#define vcc_bits ((1 << 6) | (1 << 5)) /* pins 7, 8 */
|
||||
|
||||
/* STATUS input bits */
|
||||
#define spi_miso_bit PARPORT_STATUS_BUSY /* pin 11 */
|
||||
|
||||
#define usi_miso_bit PARPORT_STATUS_PAPEROUT /* pin 12 */
|
||||
|
||||
/* CONTROL output bits */
|
||||
#define spi_cs_bit PARPORT_CONTROL_SELECT /* pin 17 */
|
||||
/* USI uses no chipselect */
|
||||
|
||||
|
||||
|
||||
static inline struct butterfly *spidev_to_pp(struct spi_device *spi)
|
||||
{
|
||||
return spi->controller_data;
|
||||
}
|
||||
|
||||
static inline int is_usidev(struct spi_device *spi)
|
||||
{
|
||||
#ifdef HAVE_USI
|
||||
return spi->chip_select != 1;
|
||||
#else
|
||||
return 0;
|
||||
#endif
|
||||
}
|
||||
|
||||
|
||||
struct butterfly {
|
||||
/* REVISIT ... for now, this must be first */
|
||||
struct spi_bitbang bitbang;
|
||||
|
||||
struct parport *port;
|
||||
struct pardevice *pd;
|
||||
|
||||
u8 lastbyte;
|
||||
|
||||
struct spi_device *dataflash;
|
||||
struct spi_device *butterfly;
|
||||
struct spi_board_info info[2];
|
||||
|
||||
};
|
||||
|
||||
/*----------------------------------------------------------------------*/
|
||||
|
||||
/*
|
||||
* these routines may be slower than necessary because they're hiding
|
||||
* the fact that there are two different SPI busses on this cable: one
|
||||
* to the DataFlash chip (or AVR SPI controller), the other to the
|
||||
* AVR USI controller.
|
||||
*/
|
||||
|
||||
static inline void
|
||||
setsck(struct spi_device *spi, int is_on)
|
||||
{
|
||||
struct butterfly *pp = spidev_to_pp(spi);
|
||||
u8 bit, byte = pp->lastbyte;
|
||||
|
||||
if (is_usidev(spi))
|
||||
bit = usi_sck_bit;
|
||||
else
|
||||
bit = spi_sck_bit;
|
||||
|
||||
if (is_on)
|
||||
byte |= bit;
|
||||
else
|
||||
byte &= ~bit;
|
||||
parport_write_data(pp->port, byte);
|
||||
pp->lastbyte = byte;
|
||||
}
|
||||
|
||||
static inline void
|
||||
setmosi(struct spi_device *spi, int is_on)
|
||||
{
|
||||
struct butterfly *pp = spidev_to_pp(spi);
|
||||
u8 bit, byte = pp->lastbyte;
|
||||
|
||||
if (is_usidev(spi))
|
||||
bit = usi_mosi_bit;
|
||||
else
|
||||
bit = spi_mosi_bit;
|
||||
|
||||
if (is_on)
|
||||
byte |= bit;
|
||||
else
|
||||
byte &= ~bit;
|
||||
parport_write_data(pp->port, byte);
|
||||
pp->lastbyte = byte;
|
||||
}
|
||||
|
||||
static inline int getmiso(struct spi_device *spi)
|
||||
{
|
||||
struct butterfly *pp = spidev_to_pp(spi);
|
||||
int value;
|
||||
u8 bit;
|
||||
|
||||
if (is_usidev(spi))
|
||||
bit = usi_miso_bit;
|
||||
else
|
||||
bit = spi_miso_bit;
|
||||
|
||||
/* only STATUS_BUSY is NOT negated */
|
||||
value = !(parport_read_status(pp->port) & bit);
|
||||
return (bit == PARPORT_STATUS_BUSY) ? value : !value;
|
||||
}
|
||||
|
||||
static void butterfly_chipselect(struct spi_device *spi, int value)
|
||||
{
|
||||
struct butterfly *pp = spidev_to_pp(spi);
|
||||
|
||||
/* set default clock polarity */
|
||||
if (value)
|
||||
setsck(spi, spi->mode & SPI_CPOL);
|
||||
|
||||
/* no chipselect on this USI link config */
|
||||
if (is_usidev(spi))
|
||||
return;
|
||||
|
||||
/* here, value == "activate or not" */
|
||||
|
||||
/* most PARPORT_CONTROL_* bits are negated */
|
||||
if (spi_cs_bit == PARPORT_CONTROL_INIT)
|
||||
value = !value;
|
||||
|
||||
/* here, value == "bit value to write in control register" */
|
||||
|
||||
parport_frob_control(pp->port, spi_cs_bit, value ? spi_cs_bit : 0);
|
||||
}
|
||||
|
||||
|
||||
/* we only needed to implement one mode here, and choose SPI_MODE_0 */
|
||||
|
||||
#define spidelay(X) do{}while(0)
|
||||
//#define spidelay ndelay
|
||||
|
||||
#define EXPAND_BITBANG_TXRX
|
||||
#include <linux/spi/spi_bitbang.h>
|
||||
|
||||
static u32
|
||||
butterfly_txrx_word_mode0(struct spi_device *spi,
|
||||
unsigned nsecs,
|
||||
u32 word, u8 bits)
|
||||
{
|
||||
return bitbang_txrx_be_cpha0(spi, nsecs, 0, word, bits);
|
||||
}
|
||||
|
||||
/*----------------------------------------------------------------------*/
|
||||
|
||||
/* override default partitioning with cmdlinepart */
|
||||
static struct mtd_partition partitions[] = { {
|
||||
/* JFFS2 wants partitions of 4*N blocks for this device ... */
|
||||
|
||||
/* sector 0 = 8 pages * 264 bytes/page (1 block)
|
||||
* sector 1 = 248 pages * 264 bytes/page
|
||||
*/
|
||||
.name = "bookkeeping", // 66 KB
|
||||
.offset = 0,
|
||||
.size = (8 + 248) * 264,
|
||||
// .mask_flags = MTD_WRITEABLE,
|
||||
}, {
|
||||
/* sector 2 = 256 pages * 264 bytes/page
|
||||
* sectors 3-5 = 512 pages * 264 bytes/page
|
||||
*/
|
||||
.name = "filesystem", // 462 KB
|
||||
.offset = MTDPART_OFS_APPEND,
|
||||
.size = MTDPART_SIZ_FULL,
|
||||
} };
|
||||
|
||||
static struct flash_platform_data flash = {
|
||||
.name = "butterflash",
|
||||
.parts = partitions,
|
||||
.nr_parts = ARRAY_SIZE(partitions),
|
||||
};
|
||||
|
||||
|
||||
/* REVISIT remove this ugly global and its "only one" limitation */
|
||||
static struct butterfly *butterfly;
|
||||
|
||||
static void butterfly_attach(struct parport *p)
|
||||
{
|
||||
struct pardevice *pd;
|
||||
int status;
|
||||
struct butterfly *pp;
|
||||
struct spi_master *master;
|
||||
struct platform_device *pdev;
|
||||
|
||||
if (butterfly)
|
||||
return;
|
||||
|
||||
/* REVISIT: this just _assumes_ a butterfly is there ... no probe,
|
||||
* and no way to be selective about what it binds to.
|
||||
*/
|
||||
|
||||
/* FIXME where should master->cdev.dev come from?
|
||||
* e.g. /sys/bus/pnp0/00:0b, some PCI thing, etc
|
||||
* setting up a platform device like this is an ugly kluge...
|
||||
*/
|
||||
pdev = platform_device_register_simple("butterfly", -1, NULL, 0);
|
||||
|
||||
master = spi_alloc_master(&pdev->dev, sizeof *pp);
|
||||
if (!master) {
|
||||
status = -ENOMEM;
|
||||
goto done;
|
||||
}
|
||||
pp = spi_master_get_devdata(master);
|
||||
|
||||
/*
|
||||
* SPI and bitbang hookup
|
||||
*
|
||||
* use default setup(), cleanup(), and transfer() methods; and
|
||||
* only bother implementing mode 0. Start it later.
|
||||
*/
|
||||
master->bus_num = 42;
|
||||
master->num_chipselect = 2;
|
||||
|
||||
pp->bitbang.master = spi_master_get(master);
|
||||
pp->bitbang.chipselect = butterfly_chipselect;
|
||||
pp->bitbang.txrx_word[SPI_MODE_0] = butterfly_txrx_word_mode0;
|
||||
|
||||
/*
|
||||
* parport hookup
|
||||
*/
|
||||
pp->port = p;
|
||||
pd = parport_register_device(p, "spi_butterfly",
|
||||
NULL, NULL, NULL,
|
||||
0 /* FLAGS */, pp);
|
||||
if (!pd) {
|
||||
status = -ENOMEM;
|
||||
goto clean0;
|
||||
}
|
||||
pp->pd = pd;
|
||||
|
||||
status = parport_claim(pd);
|
||||
if (status < 0)
|
||||
goto clean1;
|
||||
|
||||
/*
|
||||
* Butterfly reset, powerup, run firmware
|
||||
*/
|
||||
pr_debug("%s: powerup/reset Butterfly\n", p->name);
|
||||
|
||||
/* nCS for dataflash (this bit is inverted on output) */
|
||||
parport_frob_control(pp->port, spi_cs_bit, 0);
|
||||
|
||||
/* stabilize power with chip in reset (nRESET), and
|
||||
* both spi_sck_bit and usi_sck_bit clear (CPOL=0)
|
||||
*/
|
||||
pp->lastbyte |= vcc_bits;
|
||||
parport_write_data(pp->port, pp->lastbyte);
|
||||
msleep(5);
|
||||
|
||||
/* take it out of reset; assume long reset delay */
|
||||
pp->lastbyte |= butterfly_nreset;
|
||||
parport_write_data(pp->port, pp->lastbyte);
|
||||
msleep(100);
|
||||
|
||||
|
||||
/*
|
||||
* Start SPI ... for now, hide that we're two physical busses.
|
||||
*/
|
||||
status = spi_bitbang_start(&pp->bitbang);
|
||||
if (status < 0)
|
||||
goto clean2;
|
||||
|
||||
/* Bus 1 lets us talk to at45db041b (firmware disables AVR)
|
||||
* or AVR (firmware resets at45, acts as spi slave)
|
||||
*/
|
||||
pp->info[0].max_speed_hz = 15 * 1000 * 1000;
|
||||
strcpy(pp->info[0].modalias, "mtd_dataflash");
|
||||
pp->info[0].platform_data = &flash;
|
||||
pp->info[0].chip_select = 1;
|
||||
pp->info[0].controller_data = pp;
|
||||
pp->dataflash = spi_new_device(pp->bitbang.master, &pp->info[0]);
|
||||
if (pp->dataflash)
|
||||
pr_debug("%s: dataflash at %s\n", p->name,
|
||||
pp->dataflash->dev.bus_id);
|
||||
|
||||
#ifdef HAVE_USI
|
||||
/* even more custom AVR firmware */
|
||||
pp->info[1].max_speed_hz = 10 /* ?? */ * 1000 * 1000;
|
||||
strcpy(pp->info[1].modalias, "butterfly");
|
||||
// pp->info[1].platform_data = ... TBD ... ;
|
||||
pp->info[1].chip_select = 2,
|
||||
pp->info[1].controller_data = pp;
|
||||
pp->butterfly = spi_new_device(pp->bitbang.master, &pp->info[1]);
|
||||
if (pp->butterfly)
|
||||
pr_debug("%s: butterfly at %s\n", p->name,
|
||||
pp->butterfly->dev.bus_id);
|
||||
|
||||
/* FIXME setup ACK for the IRQ line ... */
|
||||
#endif
|
||||
|
||||
// dev_info(_what?_, ...)
|
||||
pr_info("%s: AVR Butterfly\n", p->name);
|
||||
butterfly = pp;
|
||||
return;
|
||||
|
||||
clean2:
|
||||
/* turn off VCC */
|
||||
parport_write_data(pp->port, 0);
|
||||
|
||||
parport_release(pp->pd);
|
||||
clean1:
|
||||
parport_unregister_device(pd);
|
||||
clean0:
|
||||
(void) spi_master_put(pp->bitbang.master);
|
||||
done:
|
||||
platform_device_unregister(pdev);
|
||||
pr_debug("%s: butterfly probe, fail %d\n", p->name, status);
|
||||
}
|
||||
|
||||
static void butterfly_detach(struct parport *p)
|
||||
{
|
||||
struct butterfly *pp;
|
||||
struct platform_device *pdev;
|
||||
int status;
|
||||
|
||||
/* FIXME this global is ugly ... but, how to quickly get from
|
||||
* the parport to the "struct butterfly" associated with it?
|
||||
* "old school" driver-internal device lists?
|
||||
*/
|
||||
if (!butterfly || butterfly->port != p)
|
||||
return;
|
||||
pp = butterfly;
|
||||
butterfly = NULL;
|
||||
|
||||
#ifdef HAVE_USI
|
||||
spi_unregister_device(pp->butterfly);
|
||||
pp->butterfly = NULL;
|
||||
#endif
|
||||
spi_unregister_device(pp->dataflash);
|
||||
pp->dataflash = NULL;
|
||||
|
||||
status = spi_bitbang_stop(&pp->bitbang);
|
||||
|
||||
/* turn off VCC */
|
||||
parport_write_data(pp->port, 0);
|
||||
msleep(10);
|
||||
|
||||
parport_release(pp->pd);
|
||||
parport_unregister_device(pp->pd);
|
||||
|
||||
pdev = to_platform_device(pp->bitbang.master->cdev.dev);
|
||||
|
||||
(void) spi_master_put(pp->bitbang.master);
|
||||
|
||||
platform_device_unregister(pdev);
|
||||
}
|
||||
|
||||
static struct parport_driver butterfly_driver = {
|
||||
.name = "spi_butterfly",
|
||||
.attach = butterfly_attach,
|
||||
.detach = butterfly_detach,
|
||||
};
|
||||
|
||||
|
||||
static int __init butterfly_init(void)
|
||||
{
|
||||
return parport_register_driver(&butterfly_driver);
|
||||
}
|
||||
device_initcall(butterfly_init);
|
||||
|
||||
static void __exit butterfly_exit(void)
|
||||
{
|
||||
parport_unregister_driver(&butterfly_driver);
|
||||
}
|
||||
module_exit(butterfly_exit);
|
||||
|
||||
MODULE_LICENSE("GPL");
|
||||
Loading…
Reference in New Issue
Block a user