korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-12-19 00:54:41 +08:00
Code Issues Packages Projects Releases Wiki Activity

PCI: imx6: Add support for i.MX8MQ

Browse Source 
Add code needed to support i.MX8MQ variant.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Cc: "A.s. Dong" <aisheng.dong@nxp.com>
Cc: Richard Zhu <hongxing.zhu@nxp.com>
This commit is contained in:
Andrey Smirnov 2019-02-01 16:15:23 -08:00 committed by Lorenzo Pieralisi
parent 4c458bb347
commit 2d8ed461db
3 changed files with 79 additions and 5 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
View File

@ -9,6 +9,7 @@ Required properties:
- "fsl,imx6sx-pcie",
- "fsl,imx6qp-pcie"
- "fsl,imx7d-pcie"
- "fsl,imx8mq-pcie"
- reg: base address and length of the PCIe controller
- interrupts: A list of interrupt outputs of the controller. Must contain an
entry for each entry in the interrupt-names property.
@ -45,7 +46,7 @@ Additional required properties for imx6sx-pcie:
PCIE_PHY power domains
- power-domain-names: Must be "pcie", "pcie_phy"
Additional required properties for imx7d-pcie:
Additional required properties for imx7d-pcie and imx8mq-pcie:
- power-domains: Must be set to a phandle pointing to PCIE_PHY power domain
- resets: Must contain phandles to PCIe-related reset lines exposed by SRC
IP block

4
drivers/pci/controller/dwc/Kconfig
View File

@ -89,8 +89,8 @@ config PCI_EXYNOS
select PCIE_DW_HOST
config PCI_IMX6
bool "Freescale i.MX6/7 PCIe controller"
depends on SOC_IMX6Q || SOC_IMX7D || (ARM && COMPILE_TEST)
bool "Freescale i.MX6/7/8 PCIe controller"
depends on SOC_IMX6Q || SOC_IMX7D || (ARM64 && ARCH_MXC) || COMPILE_TEST
depends on PCI_MSI_IRQ_DOMAIN
select PCIE_DW_HOST

77
drivers/pci/controller/dwc/pci-imx6.c
View File

@ -8,6 +8,7 @@
* Author: Sean Cross <xobs@kosagi.com>
*/
#include <linux/bitfield.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/gpio.h>
@ -32,6 +33,12 @@
#include "pcie-designware.h"
#define IMX8MQ_GPR_PCIE_REF_USE_PAD BIT(9)
#define IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE_EN BIT(10)
#define IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE BIT(11)
#define IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE GENMASK(11, 8)
#define IMX8MQ_PCIE2_BASE_ADDR 0x33c00000
#define to_imx6_pcie(x) dev_get_drvdata((x)->dev)
enum imx6_pcie_variants {
@ -39,6 +46,7 @@ enum imx6_pcie_variants {
IMX6SX,
IMX6QP,
IMX7D,
IMX8MQ,
};
#define IMX6_PCIE_FLAG_IMX6_PHY BIT(0)
@ -58,6 +66,7 @@ struct imx6_pcie {
struct clk *pcie_inbound_axi;
struct clk *pcie;
struct regmap *iomuxc_gpr;
u32 controller_id;
struct reset_control *pciephy_reset;
struct reset_control *apps_reset;
struct reset_control *turnoff_reset;
@ -275,6 +284,7 @@ static void imx6_pcie_reset_phy(struct imx6_pcie *imx6_pcie)
pcie_phy_write(imx6_pcie, PHY_RX_OVRD_IN_LO, tmp);
}
#ifdef CONFIG_ARM
/* Added for PCI abort handling */
static int imx6q_pcie_abort_handler(unsigned long addr,
unsigned int fsr, struct pt_regs *regs)
@ -308,6 +318,7 @@ static int imx6q_pcie_abort_handler(unsigned long addr,
return 1;
}
#endif
static int imx6_pcie_attach_pd(struct device *dev)
{
@ -352,6 +363,7 @@ static void imx6_pcie_assert_core_reset(struct imx6_pcie *imx6_pcie)
switch (imx6_pcie->drvdata->variant) {
case IMX7D:
case IMX8MQ:
reset_control_assert(imx6_pcie->pciephy_reset);
reset_control_assert(imx6_pcie->apps_reset);
break;
@ -386,10 +398,17 @@ static void imx6_pcie_assert_core_reset(struct imx6_pcie *imx6_pcie)
}
}
static unsigned int imx6_pcie_grp_offset(const struct imx6_pcie *imx6_pcie)
{
WARN_ON(imx6_pcie->drvdata->variant != IMX8MQ);
return imx6_pcie->controller_id == 1 ? IOMUXC_GPR16 : IOMUXC_GPR14;
}
static int imx6_pcie_enable_ref_clk(struct imx6_pcie *imx6_pcie)
{
struct dw_pcie *pci = imx6_pcie->pci;
struct device *dev = pci->dev;
unsigned int offset;
int ret = 0;
switch (imx6_pcie->drvdata->variant) {
@ -420,6 +439,19 @@ static int imx6_pcie_enable_ref_clk(struct imx6_pcie *imx6_pcie)
break;
case IMX7D:
break;
case IMX8MQ:
offset = imx6_pcie_grp_offset(imx6_pcie);
/*
* Set the over ride low and enabled
* make sure that REF_CLK is turned on.
*/
regmap_update_bits(imx6_pcie->iomuxc_gpr, offset,
IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE,
0);
regmap_update_bits(imx6_pcie->iomuxc_gpr, offset,
IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE_EN,
IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE_EN);
break;
}
return ret;
@ -496,6 +528,9 @@ static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
}
switch (imx6_pcie->drvdata->variant) {
case IMX8MQ:
reset_control_deassert(imx6_pcie->pciephy_reset);
break;
case IMX7D:
reset_control_deassert(imx6_pcie->pciephy_reset);
imx7d_pcie_wait_for_phy_pll_lock(imx6_pcie);
@ -531,9 +566,37 @@ err_pcie_phy:
}
}
static void imx6_pcie_configure_type(struct imx6_pcie *imx6_pcie)
{
unsigned int mask, val;
if (imx6_pcie->drvdata->variant == IMX8MQ &&
imx6_pcie->controller_id == 1) {
mask = IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE;
val = FIELD_PREP(IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE,
PCI_EXP_TYPE_ROOT_PORT);
} else {
mask = IMX6Q_GPR12_DEVICE_TYPE;
val = FIELD_PREP(IMX6Q_GPR12_DEVICE_TYPE,
PCI_EXP_TYPE_ROOT_PORT);
}
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, mask, val);
}
static void imx6_pcie_init_phy(struct imx6_pcie *imx6_pcie)
{
switch (imx6_pcie->drvdata->variant) {
case IMX8MQ:
/*
* TODO: Currently this code assumes external
* oscillator is being used
*/
regmap_update_bits(imx6_pcie->iomuxc_gpr,
imx6_pcie_grp_offset(imx6_pcie),
IMX8MQ_GPR_PCIE_REF_USE_PAD,
IMX8MQ_GPR_PCIE_REF_USE_PAD);
break;
case IMX7D:
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
IMX7D_GPR12_PCIE_PHY_REFCLK_SEL, 0);
@ -569,8 +632,7 @@ static void imx6_pcie_init_phy(struct imx6_pcie *imx6_pcie)
break;
}
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
IMX6Q_GPR12_DEVICE_TYPE, PCI_EXP_TYPE_ROOT_PORT << 12);
imx6_pcie_configure_type(imx6_pcie);
}
static int imx6_setup_phy_mpll(struct imx6_pcie *imx6_pcie)
@ -667,6 +729,7 @@ static void imx6_pcie_ltssm_enable(struct device *dev)
IMX6Q_GPR12_PCIE_CTL_2);
break;
case IMX7D:
case IMX8MQ:
reset_control_deassert(imx6_pcie->apps_reset);
break;
}
@ -1002,6 +1065,10 @@ static int imx6_pcie_probe(struct platform_device *pdev)
}
break;
case IMX7D:
case IMX8MQ:
if (dbi_base->start == IMX8MQ_PCIE2_BASE_ADDR)
imx6_pcie->controller_id = 1;
imx6_pcie->pciephy_reset = devm_reset_control_get_exclusive(dev,
"pciephy");
if (IS_ERR(imx6_pcie->pciephy_reset)) {
@ -1117,6 +1184,9 @@ static const struct imx6_pcie_drvdata drvdata[] = {
[IMX7D] = {
.variant = IMX7D,
},
[IMX8MQ] = {
.variant = IMX8MQ,
},
};
static const struct of_device_id imx6_pcie_of_match[] = {
@ -1124,6 +1194,7 @@ static const struct of_device_id imx6_pcie_of_match[] = {
{ .compatible = "fsl,imx6sx-pcie", .data = &drvdata[IMX6SX], },
{ .compatible = "fsl,imx6qp-pcie", .data = &drvdata[IMX6QP], },
{ .compatible = "fsl,imx7d-pcie", .data = &drvdata[IMX7D], },
{ .compatible = "fsl,imx8mq-pcie", .data = &drvdata[IMX8MQ], } ,
{},
};
@ -1140,6 +1211,7 @@ static struct platform_driver imx6_pcie_driver = {
static int __init imx6_pcie_init(void)
{
#ifdef CONFIG_ARM
/*
* Since probe() can be deferred we need to make sure that
* hook_fault_code is not called after __init memory is freed
@ -1149,6 +1221,7 @@ static int __init imx6_pcie_init(void)
*/
hook_fault_code(8, imx6q_pcie_abort_handler, SIGBUS, 0,
"external abort on non-linefetch");
#endif
return platform_driver_register(&imx6_pcie_driver);
}