mmc: rtsx: add helper function to simplify code

To support sdio card, transfer mode need make a change,
this need to split code and use it in different place,
Add new function to simplify repeat operation.

Signed-off-by: Micky Ching <micky_ching@realsil.com.cn>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This commit is contained in:
Micky Ching 2014-12-23 09:19:44 +08:00 committed by Ulf Hansson
parent 2057647f0c
commit 2d48e5f1be

View File

@ -99,6 +99,50 @@ static void sd_print_debug_regs(struct realtek_pci_sdmmc *host)
#define sd_print_debug_regs(host)
#endif /* DEBUG */
static void sd_cmd_set_sd_cmd(struct rtsx_pcr *pcr, struct mmc_command *cmd)
{
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_CMD0, 0xFF,
SD_CMD_START | cmd->opcode);
rtsx_pci_write_be32(pcr, SD_CMD1, cmd->arg);
}
static void sd_cmd_set_data_len(struct rtsx_pcr *pcr, u16 blocks, u16 blksz)
{
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_BLOCK_CNT_L, 0xFF, blocks);
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_BLOCK_CNT_H, 0xFF, blocks >> 8);
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_BYTE_CNT_L, 0xFF, blksz);
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_BYTE_CNT_H, 0xFF, blksz >> 8);
}
static int sd_response_type(struct mmc_command *cmd)
{
switch (mmc_resp_type(cmd)) {
case MMC_RSP_NONE:
return SD_RSP_TYPE_R0;
case MMC_RSP_R1:
return SD_RSP_TYPE_R1;
case MMC_RSP_R1 & ~MMC_RSP_CRC:
return SD_RSP_TYPE_R1 | SD_NO_CHECK_CRC7;
case MMC_RSP_R1B:
return SD_RSP_TYPE_R1b;
case MMC_RSP_R2:
return SD_RSP_TYPE_R2;
case MMC_RSP_R3:
return SD_RSP_TYPE_R3;
default:
return -EINVAL;
}
}
static int sd_status_index(int resp_type)
{
if (resp_type == SD_RSP_TYPE_R0)
return 0;
else if (resp_type == SD_RSP_TYPE_R2)
return 16;
return 5;
}
/*
* sd_pre_dma_transfer - do dma_map_sg() or using cookie
*
@ -297,47 +341,18 @@ static void sd_send_cmd_get_rsp(struct realtek_pci_sdmmc *host,
int timeout = 100;
int i;
u8 *ptr;
int stat_idx = 0;
u8 rsp_type;
int rsp_len = 5;
int rsp_type;
int stat_idx;
bool clock_toggled = false;
dev_dbg(sdmmc_dev(host), "%s: SD/MMC CMD %d, arg = 0x%08x\n",
__func__, cmd_idx, arg);
/* Response type:
* R0
* R1, R5, R6, R7
* R1b
* R2
* R3, R4
*/
switch (mmc_resp_type(cmd)) {
case MMC_RSP_NONE:
rsp_type = SD_RSP_TYPE_R0;
rsp_len = 0;
break;
case MMC_RSP_R1:
rsp_type = SD_RSP_TYPE_R1;
break;
case MMC_RSP_R1 & ~MMC_RSP_CRC:
rsp_type = SD_RSP_TYPE_R1 | SD_NO_CHECK_CRC7;
break;
case MMC_RSP_R1B:
rsp_type = SD_RSP_TYPE_R1b;
break;
case MMC_RSP_R2:
rsp_type = SD_RSP_TYPE_R2;
rsp_len = 16;
break;
case MMC_RSP_R3:
rsp_type = SD_RSP_TYPE_R3;
break;
default:
dev_dbg(sdmmc_dev(host), "cmd->flag is not valid\n");
err = -EINVAL;
rsp_type = sd_response_type(cmd);
if (rsp_type < 0)
goto out;
}
stat_idx = sd_status_index(rsp_type);
if (rsp_type == SD_RSP_TYPE_R1b)
timeout = 3000;
@ -352,13 +367,7 @@ static void sd_send_cmd_get_rsp(struct realtek_pci_sdmmc *host,
}
rtsx_pci_init_cmd(pcr);
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_CMD0, 0xFF, 0x40 | cmd_idx);
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_CMD1, 0xFF, (u8)(arg >> 24));
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_CMD2, 0xFF, (u8)(arg >> 16));
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_CMD3, 0xFF, (u8)(arg >> 8));
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_CMD4, 0xFF, (u8)arg);
sd_cmd_set_sd_cmd(pcr, cmd);
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_CFG2, 0xFF, rsp_type);
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_DATA_SOURCE,
0x01, PINGPONG_BUFFER);
@ -372,12 +381,10 @@ static void sd_send_cmd_get_rsp(struct realtek_pci_sdmmc *host,
/* Read data from ping-pong buffer */
for (i = PPBUF_BASE2; i < PPBUF_BASE2 + 16; i++)
rtsx_pci_add_cmd(pcr, READ_REG_CMD, (u16)i, 0, 0);
stat_idx = 16;
} else if (rsp_type != SD_RSP_TYPE_R0) {
/* Read data from SD_CMDx registers */
for (i = SD_CMD0; i <= SD_CMD4; i++)
rtsx_pci_add_cmd(pcr, READ_REG_CMD, (u16)i, 0, 0);
stat_idx = 5;
}
rtsx_pci_add_cmd(pcr, READ_REG_CMD, SD_STAT1, 0, 0);