Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6: (81 commits)
  [PATCH] USB: omninet: fix up debugging comments
  [PATCH] USB serial: add navman driver
  [PATCH] USB: Fix irda-usb use after use
  [PATCH] USB: rtl8150 small fix
  [PATCH] USB: ftdi_sio: add Icom ID1 USB product and vendor ids
  [PATCH] USB: cp2101: add new device IDs
  [PATCH] USB: fix check_ctrlrecip to allow control transfers in state ADDRESS
  [PATCH] USB: vicam.c: fix a NULL pointer dereference
  [PATCH] USB: ZC0301 driver bugfix
  [PATCH] USB: add support for Creativelabs Silvercrest USB keyboard
  [PATCH] USB: storage: new unusual_devs.h entry: Mitsumi 7in1 Card Reader
  [PATCH] USB: storage: unusual_devs.h entry 0420:0001
  [PATCH] USB: storage: another unusual_devs.h entry
  [PATCH] USB: storage: sandisk unusual_devices entry
  [PATCH] USB: fix initdata issue in isp116x-hcd
  [PATCH] USB: usbcore: usb_set_configuration oops (NULL ptr dereference)
  [PATCH] USB: usbcore: Don't assume a USB configuration includes any interfaces
  [PATCH] USB: ub 03 drop stall clearing
  [PATCH] USB: ub 02 remove diag
  [PATCH] USB: ub 01 remove first_open
  ...
This commit is contained in:
Linus Torvalds 2006-03-21 09:25:47 -08:00
commit 2bf2154c6b
162 changed files with 8934 additions and 8791 deletions

View File

@ -2813,6 +2813,8 @@ E: luca.risolia@studio.unibo.it
P: 1024D/FCE635A4 88E8 F32F 7244 68BA 3958 5D40 99DA 5D2A FCE6 35A4
D: V4L driver for W996[87]CF JPEG USB Dual Mode Camera Chips
D: V4L2 driver for SN9C10x PC Camera Controllers
D: V4L2 driver for ET61X151 and ET61X251 PC Camera Controllers
D: V4L2 driver for ZC0301 Image Processor and Control Chip
S: Via Liberta' 41/A
S: Osio Sotto, 24046, Bergamo
S: Italy

View File

@ -176,6 +176,14 @@ Description: Force the application to unmap previously mapped buffer memory
1 = force memory unmapping (save memory)
Default: 0
-------------------------------------------------------------------------------
Name: frame_timeout
Type: uint array (min = 0, max = 64)
Syntax: <n[,...]>
Description: Timeout for a video frame in seconds. This parameter is
specific for each detected camera. This parameter can be
changed at runtime thanks to the /sys filesystem interface.
Default: 2
-------------------------------------------------------------------------------
Name: debug
Type: ushort
Syntax: <n>
@ -266,7 +274,7 @@ the V4L2 interface.
10. Notes for V4L2 application developers
========================================
=========================================
This driver follows the V4L2 API specifications. In particular, it enforces two
rules:

View File

@ -196,6 +196,14 @@ Description: Force the application to unmap previously mapped buffer memory
1 = force memory unmapping (save memory)
Default: 0
-------------------------------------------------------------------------------
Name: frame_timeout
Type: uint array (min = 0, max = 64)
Syntax: <n[,...]>
Description: Timeout for a video frame in seconds. This parameter is
specific for each detected camera. This parameter can be
changed at runtime thanks to the /sys filesystem interface.
Default: 2
-------------------------------------------------------------------------------
Name: debug
Type: ushort
Syntax: <n>
@ -321,6 +329,7 @@ Vendor ID Product ID
--------- ----------
0x0c45 0x6001
0x0c45 0x6005
0x0c45 0x6007
0x0c45 0x6009
0x0c45 0x600d
0x0c45 0x6024
@ -370,6 +379,7 @@ HV7131D Hynix Semiconductor, Inc.
MI-0343 Micron Technology, Inc.
OV7630 OmniVision Technologies, Inc.
PAS106B PixArt Imaging, Inc.
PAS202BCA PixArt Imaging, Inc.
PAS202BCB PixArt Imaging, Inc.
TAS5110C1B Taiwan Advanced Sensor Corporation
TAS5130D1B Taiwan Advanced Sensor Corporation
@ -493,6 +503,7 @@ Many thanks to following persons for their contribute (listed in alphabetical
order):
- Luca Capello for the donation of a webcam;
- Philippe Coval for having helped testing the PAS202BCA image sensor;
- Joao Rodrigo Fuzaro, Joao Limirio, Claudio Filho and Caio Begotti for the
donation of a webcam;
- Jon Hollstrom for the donation of a webcam;

View File

@ -0,0 +1,254 @@
ZC0301 Image Processor and Control Chip
Driver for Linux
=======================================
- Documentation -
Index
=====
1. Copyright
2. Disclaimer
3. License
4. Overview and features
5. Module dependencies
6. Module loading
7. Module parameters
8. Supported devices
9. Notes for V4L2 application developers
10. Contact information
11. Credits
1. Copyright
============
Copyright (C) 2006 by Luca Risolia <luca.risolia@studio.unibo.it>
2. Disclaimer
=============
This software is not developed or sponsored by Z-Star Microelectronics Corp.
Trademarks are property of their respective owner.
3. License
==========
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
4. Overview and features
========================
This driver supports the video interface of the devices mounting the ZC0301
Image Processor and Control Chip.
The driver relies on the Video4Linux2 and USB core modules. It has been
designed to run properly on SMP systems as well.
The latest version of the ZC0301 driver can be found at the following URL:
http://www.linux-projects.org/
Some of the features of the driver are:
- full compliance with the Video4Linux2 API (see also "Notes for V4L2
application developers" paragraph);
- available mmap or read/poll methods for video streaming through isochronous
data transfers;
- automatic detection of image sensor;
- video format is standard JPEG;
- dynamic driver control thanks to various module parameters (see "Module
parameters" paragraph);
- up to 64 cameras can be handled at the same time; they can be connected and
disconnected from the host many times without turning off the computer, if
the system supports hotplugging;
5. Module dependencies
======================
For it to work properly, the driver needs kernel support for Video4Linux and
USB.
The following options of the kernel configuration file must be enabled and
corresponding modules must be compiled:
# Multimedia devices
#
CONFIG_VIDEO_DEV=m
# USB support
#
CONFIG_USB=m
In addition, depending on the hardware being used, the modules below are
necessary:
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_UHCI_HCD=m
CONFIG_USB_OHCI_HCD=m
The ZC0301 controller also provides a built-in microphone interface. It is
supported by the USB Audio driver thanks to the ALSA API:
# Sound
#
CONFIG_SOUND=y
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
# USB devices
#
CONFIG_SND_USB_AUDIO=m
And finally:
# USB Multimedia devices
#
CONFIG_USB_ZC0301=m
6. Module loading
=================
To use the driver, it is necessary to load the "zc0301" module into memory
after every other module required: "videodev", "usbcore" and, depending on
the USB host controller you have, "ehci-hcd", "uhci-hcd" or "ohci-hcd".
Loading can be done as shown below:
[root@localhost home]# modprobe zc0301
At this point the devices should be recognized. You can invoke "dmesg" to
analyze kernel messages and verify that the loading process has gone well:
[user@localhost home]$ dmesg
7. Module parameters
====================
Module parameters are listed below:
-------------------------------------------------------------------------------
Name: video_nr
Type: short array (min = 0, max = 64)
Syntax: <-1|n[,...]>
Description: Specify V4L2 minor mode number:
-1 = use next available
n = use minor number n
You can specify up to 64 cameras this way.
For example:
video_nr=-1,2,-1 would assign minor number 2 to the second
registered camera and use auto for the first one and for every
other camera.
Default: -1
-------------------------------------------------------------------------------
Name: force_munmap
Type: bool array (min = 0, max = 64)
Syntax: <0|1[,...]>
Description: Force the application to unmap previously mapped buffer memory
before calling any VIDIOC_S_CROP or VIDIOC_S_FMT ioctl's. Not
all the applications support this feature. This parameter is
specific for each detected camera.
0 = do not force memory unmapping
1 = force memory unmapping (save memory)
Default: 0
-------------------------------------------------------------------------------
Name: frame_timeout
Type: uint array (min = 0, max = 64)
Syntax: <n[,...]>
Description: Timeout for a video frame in seconds. This parameter is
specific for each detected camera. This parameter can be
changed at runtime thanks to the /sys filesystem interface.
Default: 2
-------------------------------------------------------------------------------
Name: debug
Type: ushort
Syntax: <n>
Description: Debugging information level, from 0 to 3:
0 = none (use carefully)
1 = critical errors
2 = significant informations
3 = more verbose messages
Level 3 is useful for testing only, when only one device
is used at the same time. It also shows some more informations
about the hardware being detected. This module parameter can be
changed at runtime thanks to the /sys filesystem interface.
Default: 2
-------------------------------------------------------------------------------
8. Supported devices
====================
None of the names of the companies as well as their products will be mentioned
here. They have never collaborated with the author, so no advertising.
From the point of view of a driver, what unambiguously identify a device are
its vendor and product USB identifiers. Below is a list of known identifiers of
devices mounting the ZC0301 Image Processor and Control Chips:
Vendor ID Product ID
--------- ----------
0x041e 0x4017
0x041e 0x401c
0x041e 0x401e
0x041e 0x4034
0x041e 0x4035
0x046d 0x08ae
0x0ac8 0x0301
0x10fd 0x8050
The list above does not imply that all those devices work with this driver: up
until now only the ones that mount the following image sensors are supported;
kernel messages will always tell you whether this is the case:
Model Manufacturer
----- ------------
PAS202BCB PixArt Imaging, Inc.
9. Notes for V4L2 application developers
========================================
This driver follows the V4L2 API specifications. In particular, it enforces two
rules:
- exactly one I/O method, either "mmap" or "read", is associated with each
file descriptor. Once it is selected, the application must close and reopen the
device to switch to the other I/O method;
- although it is not mandatory, previously mapped buffer memory should always
be unmapped before calling any "VIDIOC_S_CROP" or "VIDIOC_S_FMT" ioctl's.
The same number of buffers as before will be allocated again to match the size
of the new video frames, so you have to map the buffers again before any I/O
attempts on them.
10. Contact information
=======================
The author may be contacted by e-mail at <luca.risolia@studio.unibo.it>.
GPG/PGP encrypted e-mail's are accepted. The GPG key ID of the author is
'FCE635A4'; the public 1024-bit key should be available at any keyserver;
the fingerprint is: '88E8 F32F 7244 68BA 3958 5D40 99DA 5D2A FCE6 35A4'.
11. Credits
===========
- Informations about the chip internals needed to enable the I2C protocol have
been taken from the documentation of the ZC030x Video4Linux1 driver written
by Andrew Birkett <andy@nobugs.org>;
- The initialization values of the ZC0301 controller connected to the PAS202BCB
image sensor have been taken from the SPCA5XX driver maintained by
Michel Xhaard <mxhaard@magic.fr>.

View File

@ -2896,6 +2896,14 @@ L: video4linux-list@redhat.com
W: http://www.linux-projects.org
S: Maintained
USB ZC0301 DRIVER
P: Luca Risolia
M: luca.risolia@studio.unibo.it
L: linux-usb-devel@lists.sourceforge.net
L: video4linux-list@redhat.com
W: http://www.linux-projects.org
S: Maintained
USB ZD1201 DRIVER
P: Jeroen Vreeken
M: pe1rxq@amsat.org

View File

@ -38,7 +38,7 @@ struct cpu_spec cpu_specs[] = {
{ 0xffffffff, 0x02030204, "Au1100 BE", 0, 1 },
{ 0xffffffff, 0x03030200, "Au1550 AA", 0, 1 },
{ 0xffffffff, 0x04030200, "Au1200 AB", 0, 0 },
{ 0xffffffff, 0x04030201, "Au1200 AC", 0, 1 },
{ 0xffffffff, 0x04030201, "Au1200 AC", 1, 0 },
{ 0x00000000, 0x00000000, "Unknown Au1xxx", 1, 0 },
};

View File

@ -20,7 +20,7 @@
static struct resource au1xxx_usb_ohci_resources[] = {
[0] = {
.start = USB_OHCI_BASE,
.end = USB_OHCI_BASE + USB_OHCI_LEN,
.end = USB_OHCI_BASE + USB_OHCI_LEN - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@ -278,9 +278,7 @@ static struct platform_device *au1xxx_platform_devices[] __initdata = {
&au1100_lcd_device,
#endif
#ifdef CONFIG_SOC_AU1200
#if 0 /* fixme */
&au1xxx_usb_ehci_device,
#endif
&au1xxx_usb_gdt_device,
&au1xxx_usb_otg_device,
&au1200_lcd_device,

View File

@ -8,7 +8,6 @@
* and is not licensed separately. See file COPYING for details.
*
* TODO (sorted by decreasing priority)
* -- Kill first_open (Al Viro fixed the block layer now)
* -- set readonly flag for CDs, set removable flag for CF readers
* -- do inquiry and verify we got a disk and not a tape (for LUN mismatch)
* -- special case some senses, e.g. 3a/0 -> no media present, reduce retries
@ -181,6 +180,7 @@ struct ub_dev;
#define UB_DIR_ILLEGAL2 2
#define UB_DIR_WRITE 3
/* P3 */
#define UB_DIR_CHAR(c) (((c)==UB_DIR_WRITE)? 'w': \
(((c)==UB_DIR_READ)? 'r': 'n'))
@ -196,24 +196,11 @@ enum ub_scsi_cmd_state {
UB_CMDST_DONE /* Final state */
};
static char *ub_scsi_cmd_stname[] = {
". ",
"Cmd",
"dat",
"c2s",
"sts",
"clr",
"crs",
"Sen",
"fin"
};
struct ub_scsi_cmd {
unsigned char cdb[UB_MAX_CDB_SIZE];
unsigned char cdb_len;
unsigned char dir; /* 0 - none, 1 - read, 3 - write. */
unsigned char trace_index;
enum ub_scsi_cmd_state state;
unsigned int tag;
struct ub_scsi_cmd *next;
@ -249,28 +236,6 @@ struct ub_capacity {
unsigned int bshift; /* Shift between 512 and hard sects */
};
/*
* The SCSI command tracing structure.
*/
#define SCMD_ST_HIST_SZ 8
#define SCMD_TRACE_SZ 63 /* Less than 4KB of 61-byte lines */
struct ub_scsi_cmd_trace {
int hcur;
unsigned int tag;
unsigned int req_size, act_size;
unsigned char op;
unsigned char dir;
unsigned char key, asc, ascq;
char st_hst[SCMD_ST_HIST_SZ];
};
struct ub_scsi_trace {
int cur;
struct ub_scsi_cmd_trace vec[SCMD_TRACE_SZ];
};
/*
* This is a direct take-off from linux/include/completion.h
* The difference is that I do not wait on this thing, just poll.
@ -334,7 +299,6 @@ struct ub_lun {
int changed; /* Media was changed */
int removable;
int readonly;
int first_open; /* Kludge. See ub_bd_open. */
struct ub_request urq;
@ -390,7 +354,6 @@ struct ub_dev {
wait_queue_head_t reset_wait;
int sg_stat[6];
struct ub_scsi_trace tr;
};
/*
@ -459,137 +422,6 @@ static int ub_qlock_next = 0;
static DEFINE_SPINLOCK(ub_lock); /* Locks globals and ->openc */
/*
* The SCSI command tracing procedures.
*/
static void ub_cmdtr_new(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
{
int n;
struct ub_scsi_cmd_trace *t;
if ((n = sc->tr.cur + 1) == SCMD_TRACE_SZ) n = 0;
t = &sc->tr.vec[n];
memset(t, 0, sizeof(struct ub_scsi_cmd_trace));
t->tag = cmd->tag;
t->op = cmd->cdb[0];
t->dir = cmd->dir;
t->req_size = cmd->len;
t->st_hst[0] = cmd->state;
sc->tr.cur = n;
cmd->trace_index = n;
}
static void ub_cmdtr_state(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
{
int n;
struct ub_scsi_cmd_trace *t;
t = &sc->tr.vec[cmd->trace_index];
if (t->tag == cmd->tag) {
if ((n = t->hcur + 1) == SCMD_ST_HIST_SZ) n = 0;
t->st_hst[n] = cmd->state;
t->hcur = n;
}
}
static void ub_cmdtr_act_len(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
{
struct ub_scsi_cmd_trace *t;
t = &sc->tr.vec[cmd->trace_index];
if (t->tag == cmd->tag)
t->act_size = cmd->act_len;
}
static void ub_cmdtr_sense(struct ub_dev *sc, struct ub_scsi_cmd *cmd,
unsigned char *sense)
{
struct ub_scsi_cmd_trace *t;
t = &sc->tr.vec[cmd->trace_index];
if (t->tag == cmd->tag) {
t->key = sense[2] & 0x0F;
t->asc = sense[12];
t->ascq = sense[13];
}
}
static ssize_t ub_diag_show(struct device *dev, struct device_attribute *attr,
char *page)
{
struct usb_interface *intf;
struct ub_dev *sc;
struct list_head *p;
struct ub_lun *lun;
int cnt;
unsigned long flags;
int nc, nh;
int i, j;
struct ub_scsi_cmd_trace *t;
intf = to_usb_interface(dev);
sc = usb_get_intfdata(intf);
if (sc == NULL)
return 0;
cnt = 0;
spin_lock_irqsave(sc->lock, flags);
cnt += sprintf(page + cnt,
"poison %d reset %d\n",
atomic_read(&sc->poison), sc->reset);
cnt += sprintf(page + cnt,
"qlen %d qmax %d\n",
sc->cmd_queue.qlen, sc->cmd_queue.qmax);
cnt += sprintf(page + cnt,
"sg %d %d %d %d %d .. %d\n",
sc->sg_stat[0],
sc->sg_stat[1],
sc->sg_stat[2],
sc->sg_stat[3],
sc->sg_stat[4],
sc->sg_stat[5]);
list_for_each (p, &sc->luns) {
lun = list_entry(p, struct ub_lun, link);
cnt += sprintf(page + cnt,
"lun %u changed %d removable %d readonly %d\n",
lun->num, lun->changed, lun->removable, lun->readonly);
}
if ((nc = sc->tr.cur + 1) == SCMD_TRACE_SZ) nc = 0;
for (j = 0; j < SCMD_TRACE_SZ; j++) {
t = &sc->tr.vec[nc];
cnt += sprintf(page + cnt, "%08x %02x", t->tag, t->op);
if (t->op == REQUEST_SENSE) {
cnt += sprintf(page + cnt, " [sense %x %02x %02x]",
t->key, t->asc, t->ascq);
} else {
cnt += sprintf(page + cnt, " %c", UB_DIR_CHAR(t->dir));
cnt += sprintf(page + cnt, " [%5d %5d]",
t->req_size, t->act_size);
}
if ((nh = t->hcur + 1) == SCMD_ST_HIST_SZ) nh = 0;
for (i = 0; i < SCMD_ST_HIST_SZ; i++) {
cnt += sprintf(page + cnt, " %s",
ub_scsi_cmd_stname[(int)t->st_hst[nh]]);
if (++nh == SCMD_ST_HIST_SZ) nh = 0;
}
cnt += sprintf(page + cnt, "\n");
if (++nc == SCMD_TRACE_SZ) nc = 0;
}
spin_unlock_irqrestore(sc->lock, flags);
return cnt;
}
static DEVICE_ATTR(diag, S_IRUGO, ub_diag_show, NULL); /* N.B. World readable */
/*
* The id allocator.
*
@ -1092,7 +924,6 @@ static int ub_scsi_cmd_start(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
add_timer(&sc->work_timer);
cmd->state = UB_CMDST_CMD;
ub_cmdtr_state(sc, cmd);
return 0;
}
@ -1145,12 +976,10 @@ static void ub_scsi_dispatch(struct ub_dev *sc)
ub_cmdq_pop(sc);
(*cmd->done)(sc, cmd);
} else if (cmd->state == UB_CMDST_INIT) {
ub_cmdtr_new(sc, cmd);
if ((rc = ub_scsi_cmd_start(sc, cmd)) == 0)
break;
cmd->error = rc;
cmd->state = UB_CMDST_DONE;
ub_cmdtr_state(sc, cmd);
} else {
if (!ub_is_completed(&sc->work_done))
break;
@ -1247,7 +1076,6 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
return;
}
cmd->state = UB_CMDST_CLEAR;
ub_cmdtr_state(sc, cmd);
return;
case -ESHUTDOWN: /* unplug */
case -EILSEQ: /* unplug timeout on uhci */
@ -1279,7 +1107,6 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
return;
}
cmd->state = UB_CMDST_CLR2STS;
ub_cmdtr_state(sc, cmd);
return;
}
if (urb->status == -EOVERFLOW) {
@ -1304,7 +1131,6 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
if (urb->status != 0 ||
len != cmd->sgv[cmd->current_sg].length) {
cmd->act_len += len;
ub_cmdtr_act_len(sc, cmd);
cmd->error = -EIO;
ub_state_stat(sc, cmd);
@ -1331,7 +1157,6 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
}
cmd->act_len += urb->actual_length;
ub_cmdtr_act_len(sc, cmd);
if (++cmd->current_sg < cmd->nsg) {
ub_data_start(sc, cmd);
@ -1357,7 +1182,6 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
cmd->error = -EIO; /* A cheap trick... */
cmd->state = UB_CMDST_CLRRS;
ub_cmdtr_state(sc, cmd);
return;
}
@ -1441,7 +1265,6 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
return;
}
cmd->state = UB_CMDST_DONE;
ub_cmdtr_state(sc, cmd);
ub_cmdq_pop(sc);
(*cmd->done)(sc, cmd);
@ -1496,7 +1319,6 @@ static void ub_data_start(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
add_timer(&sc->work_timer);
cmd->state = UB_CMDST_DATA;
ub_cmdtr_state(sc, cmd);
}
/*
@ -1508,7 +1330,6 @@ static void ub_state_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd, int rc)
cmd->error = rc;
cmd->state = UB_CMDST_DONE;
ub_cmdtr_state(sc, cmd);
ub_cmdq_pop(sc);
(*cmd->done)(sc, cmd);
}
@ -1554,7 +1375,6 @@ static void ub_state_stat(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
cmd->stat_count = 0;
cmd->state = UB_CMDST_STAT;
ub_cmdtr_state(sc, cmd);
}
/*
@ -1573,7 +1393,6 @@ static void ub_state_stat_counted(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
return;
cmd->state = UB_CMDST_STAT;
ub_cmdtr_state(sc, cmd);
}
/*
@ -1611,7 +1430,6 @@ static void ub_state_sense(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
scmd->tag = sc->tagcnt++;
cmd->state = UB_CMDST_SENSE;
ub_cmdtr_state(sc, cmd);
ub_cmdq_insert(sc, scmd);
return;
@ -1667,11 +1485,6 @@ static void ub_top_sense_done(struct ub_dev *sc, struct ub_scsi_cmd *scmd)
unsigned char *sense = sc->top_sense;
struct ub_scsi_cmd *cmd;
/*
* Ignoring scmd->act_len, because the buffer was pre-zeroed.
*/
ub_cmdtr_sense(sc, scmd, sense);
/*
* Find the command which triggered the unit attention or a check,
* save the sense into it, and advance its state machine.
@ -1693,6 +1506,9 @@ static void ub_top_sense_done(struct ub_dev *sc, struct ub_scsi_cmd *scmd)
return;
}
/*
* Ignoring scmd->act_len, because the buffer was pre-zeroed.
*/
cmd->key = sense[2] & 0x0F;
cmd->asc = sense[12];
cmd->ascq = sense[13];
@ -1849,26 +1665,6 @@ static int ub_bd_open(struct inode *inode, struct file *filp)
sc->openc++;
spin_unlock_irqrestore(&ub_lock, flags);
/*
* This is a workaround for a specific problem in our block layer.
* In 2.6.9, register_disk duplicates the code from rescan_partitions.
* However, if we do add_disk with a device which persistently reports
* a changed media, add_disk calls register_disk, which does do_open,
* which will call rescan_paritions for changed media. After that,
* register_disk attempts to do it all again and causes double kobject
* registration and a eventually an oops on module removal.
*
* The bottom line is, Al Viro says that we should not allow
* bdev->bd_invalidated to be set when doing add_disk no matter what.
*/
if (lun->first_open) {
lun->first_open = 0;
if (lun->changed) {
rc = -ENOMEDIUM;
goto err_open;
}
}
if (lun->removable || lun->readonly)
check_disk_change(inode->i_bdev);
@ -2007,9 +1803,8 @@ static int ub_sync_tur(struct ub_dev *sc, struct ub_lun *lun)
init_completion(&compl);
rc = -ENOMEM;
if ((cmd = kmalloc(ALLOC_SIZE, GFP_KERNEL)) == NULL)
if ((cmd = kzalloc(ALLOC_SIZE, GFP_KERNEL)) == NULL)
goto err_alloc;
memset(cmd, 0, ALLOC_SIZE);
cmd->cdb[0] = TEST_UNIT_READY;
cmd->cdb_len = 6;
@ -2062,9 +1857,8 @@ static int ub_sync_read_cap(struct ub_dev *sc, struct ub_lun *lun,
init_completion(&compl);
rc = -ENOMEM;
if ((cmd = kmalloc(ALLOC_SIZE, GFP_KERNEL)) == NULL)
if ((cmd = kzalloc(ALLOC_SIZE, GFP_KERNEL)) == NULL)
goto err_alloc;
memset(cmd, 0, ALLOC_SIZE);
p = (char *)cmd + sizeof(struct ub_scsi_cmd);
cmd->cdb[0] = 0x25;
@ -2405,9 +2199,8 @@ static int ub_probe(struct usb_interface *intf,
return -ENXIO;
rc = -ENOMEM;
if ((sc = kmalloc(sizeof(struct ub_dev), GFP_KERNEL)) == NULL)
if ((sc = kzalloc(sizeof(struct ub_dev), GFP_KERNEL)) == NULL)
goto err_core;
memset(sc, 0, sizeof(struct ub_dev));
sc->lock = ub_next_lock();
INIT_LIST_HEAD(&sc->luns);
usb_init_urb(&sc->work_urb);
@ -2438,9 +2231,6 @@ static int ub_probe(struct usb_interface *intf,
if (ub_get_pipes(sc, sc->dev, intf) != 0)
goto err_dev_desc;
if (device_create_file(&sc->intf->dev, &dev_attr_diag) != 0)
goto err_diag;
/*
* At this point, all USB initialization is done, do upper layer.
* We really hate halfway initialized structures, so from the
@ -2480,19 +2270,8 @@ static int ub_probe(struct usb_interface *intf,
nluns = 1;
for (i = 0; i < 3; i++) {
if ((rc = ub_sync_getmaxlun(sc)) < 0) {
/*
* This segment is taken from usb-storage. They say
* that ZIP-100 needs this, but my own ZIP-100 works
* fine without this.
* Still, it does not seem to hurt anything.
*/
if (rc == -EPIPE) {
ub_probe_clear_stall(sc, sc->recv_bulk_pipe);
ub_probe_clear_stall(sc, sc->send_bulk_pipe);
}
if ((rc = ub_sync_getmaxlun(sc)) < 0)
break;
}
if (rc != 0) {
nluns = rc;
break;
@ -2505,8 +2284,6 @@ static int ub_probe(struct usb_interface *intf,
}
return 0;
/* device_remove_file(&sc->intf->dev, &dev_attr_diag); */
err_diag:
err_dev_desc:
usb_set_intfdata(intf, NULL);
// usb_put_intf(sc->intf);
@ -2524,9 +2301,8 @@ static int ub_probe_lun(struct ub_dev *sc, int lnum)
int rc;
rc = -ENOMEM;
if ((lun = kmalloc(sizeof(struct ub_lun), GFP_KERNEL)) == NULL)
if ((lun = kzalloc(sizeof(struct ub_lun), GFP_KERNEL)) == NULL)
goto err_alloc;
memset(lun, 0, sizeof(struct ub_lun));
lun->num = lnum;
rc = -ENOSR;
@ -2541,7 +2317,6 @@ static int ub_probe_lun(struct ub_dev *sc, int lnum)
lun->removable = 1; /* XXX Query this from the device */
lun->changed = 1; /* ub_revalidate clears only */
lun->first_open = 1;
ub_revalidate(sc, lun);
rc = -ENOMEM;
@ -2636,7 +2411,6 @@ static void ub_disconnect(struct usb_interface *intf)
while ((cmd = ub_cmdq_peek(sc)) != NULL) {
cmd->error = -ENOTCONN;
cmd->state = UB_CMDST_DONE;
ub_cmdtr_state(sc, cmd);
ub_cmdq_pop(sc);
(*cmd->done)(sc, cmd);
cnt++;
@ -2687,7 +2461,6 @@ static void ub_disconnect(struct usb_interface *intf)
* and no URBs left in transit.
*/
device_remove_file(&sc->intf->dev, &dev_attr_diag);
usb_set_intfdata(intf, NULL);
// usb_put_intf(sc->intf);
sc->intf = NULL;

View File

@ -740,7 +740,7 @@ static void irda_usb_receive(struct urb *urb, struct pt_regs *regs)
struct sk_buff *newskb;
struct sk_buff *dataskb;
struct urb *next_urb;
int docopy;
unsigned int len, docopy;
IRDA_DEBUG(2, "%s(), len=%d\n", __FUNCTION__, urb->actual_length);
@ -851,10 +851,11 @@ static void irda_usb_receive(struct urb *urb, struct pt_regs *regs)
dataskb->dev = self->netdev;
dataskb->mac.raw = dataskb->data;
dataskb->protocol = htons(ETH_P_IRDA);
len = dataskb->len;
netif_rx(dataskb);
/* Keep stats up to date */
self->stats.rx_bytes += dataskb->len;
self->stats.rx_bytes += len;
self->stats.rx_packets++;
self->netdev->last_rx = jiffies;

View File

@ -10,6 +10,7 @@ menu "USB support"
config USB_ARCH_HAS_HCD
boolean
default y if USB_ARCH_HAS_OHCI
default y if USB_ARCH_HAS_EHCI
default y if ARM # SL-811
default PCI
@ -22,6 +23,7 @@ config USB_ARCH_HAS_OHCI
default y if ARCH_LH7A404
default y if ARCH_S3C2410
default y if PXA27x
default y if ARCH_AT91RM9200
# PPC:
default y if STB03xxx
default y if PPC_MPC52xx
@ -30,6 +32,13 @@ config USB_ARCH_HAS_OHCI
# more:
default PCI
# some non-PCI hcds implement EHCI
config USB_ARCH_HAS_EHCI
boolean
default y if PPC_83xx
default y if SOC_AU1200
default PCI
# ARM SA1111 chips have a non-PCI based "OHCI-compatible" USB host interface.
config USB
tristate "Support for Host-side USB"

View File

@ -15,10 +15,9 @@ obj-$(CONFIG_USB_OHCI_HCD) += host/
obj-$(CONFIG_USB_UHCI_HCD) += host/
obj-$(CONFIG_USB_SL811_HCD) += host/
obj-$(CONFIG_ETRAX_USB_HOST) += host/
obj-$(CONFIG_USB_OHCI_AT91) += host/
obj-$(CONFIG_USB_ACM) += class/
obj-$(CONFIG_USB_AUDIO) += class/
obj-$(CONFIG_USB_MIDI) += class/
obj-$(CONFIG_USB_PRINTER) += class/
obj-$(CONFIG_USB_STORAGE) += storage/
@ -48,6 +47,7 @@ obj-$(CONFIG_USB_SN9C102) += media/
obj-$(CONFIG_USB_STV680) += media/
obj-$(CONFIG_USB_VICAM) += media/
obj-$(CONFIG_USB_W9968CF) += media/
obj-$(CONFIG_USB_ZC0301) += media/
obj-$(CONFIG_USB_CATC) += net/
obj-$(CONFIG_USB_KAWETH) += net/

View File

@ -4,53 +4,6 @@
comment "USB Device Class drivers"
depends on USB
config OBSOLETE_OSS_USB_DRIVER
bool "Obsolete OSS USB drivers"
depends on USB && SOUND
help
This option enables support for the obsolete USB Audio and Midi
drivers that are scheduled for removal in the near future since
there are ALSA drivers for the same hardware.
Please contact Adrian Bunk <bunk@stusta.de> if you had to
say Y here because of missing support in the ALSA drivers.
If unsure, say N.
config USB_AUDIO
tristate "USB Audio support"
depends on USB && SOUND && OBSOLETE_OSS_USB_DRIVER
help
Say Y here if you want to connect USB audio equipment such as
speakers to your computer's USB port. You only need this if you use
the OSS sound driver; ALSA has its own option for usb audio support.
To compile this driver as a module, choose M here: the
module will be called audio.
config USB_MIDI
tristate "USB MIDI support"
depends on USB && SOUND && OBSOLETE_OSS_USB_DRIVER
---help---
Say Y here if you want to connect a USB MIDI device to your
computer's USB port. You only need this if you use the OSS
sound system; USB MIDI devices are supported by ALSA's USB
audio driver. This driver is for devices that comply with
'Universal Serial Bus Device Class Definition for MIDI Device'.
The following devices are known to work:
* Steinberg USB2MIDI
* Roland MPU64
* Roland PC-300
* Roland SC8850
* Roland UM-1
* Roland UM-2
* Roland UA-100
* Yamaha MU1000
To compile this driver as a module, choose M here: the
module will be called usb-midi.
config USB_ACM
tristate "USB Modem (CDC ACM) support"
depends on USB

View File

@ -4,6 +4,4 @@
#
obj-$(CONFIG_USB_ACM) += cdc-acm.o
obj-$(CONFIG_USB_AUDIO) += audio.o
obj-$(CONFIG_USB_MIDI) += usb-midi.o
obj-$(CONFIG_USB_PRINTER) += usblp.o

File diff suppressed because it is too large Load Diff

View File

@ -1,110 +0,0 @@
#define CS_AUDIO_UNDEFINED 0x20
#define CS_AUDIO_DEVICE 0x21
#define CS_AUDIO_CONFIGURATION 0x22
#define CS_AUDIO_STRING 0x23
#define CS_AUDIO_INTERFACE 0x24
#define CS_AUDIO_ENDPOINT 0x25
#define HEADER 0x01
#define INPUT_TERMINAL 0x02
#define OUTPUT_TERMINAL 0x03
#define MIXER_UNIT 0x04
#define SELECTOR_UNIT 0x05
#define FEATURE_UNIT 0x06
#define PROCESSING_UNIT 0x07
#define EXTENSION_UNIT 0x08
#define AS_GENERAL 0x01
#define FORMAT_TYPE 0x02
#define FORMAT_SPECIFIC 0x03
#define EP_GENERAL 0x01
#define MAX_CHAN 9
#define MAX_FREQ 16
#define MAX_IFACE 8
#define MAX_FORMAT 8
#define MAX_ALT 32 /* Sorry, we need quite a few for the Philips webcams */
struct usb_audio_terminal
{
u8 flags;
u8 assoc;
u16 type; /* Mic etc */
u8 channels;
u8 source;
u16 chancfg;
};
struct usb_audio_format
{
u8 type;
u8 channels;
u8 num_freq;
u8 sfz;
u8 bits;
u16 freq[MAX_FREQ];
};
struct usb_audio_interface
{
u8 terminal;
u8 delay;
u16 num_formats;
u16 format_type;
u8 flags;
u8 idleconf; /* Idle config */
#define AU_IFACE_FOUND 1
struct usb_audio_format format[MAX_FORMAT];
};
struct usb_audio_device
{
struct list_head list;
u8 mixer;
u8 selector;
void *irq_handle;
u8 num_channels;
u8 num_dsp_iface;
u8 channel_map[MAX_CHAN];
struct usb_audio_terminal terminal[MAX_CHAN];
struct usb_audio_interface interface[MAX_IFACE][MAX_ALT];
};
/* Audio Class specific Request Codes */
#define SET_CUR 0x01
#define GET_CUR 0x81
#define SET_MIN 0x02
#define GET_MIN 0x82
#define SET_MAX 0x03
#define GET_MAX 0x83
#define SET_RES 0x04
#define GET_RES 0x84
#define SET_MEM 0x05
#define GET_MEM 0x85
#define GET_STAT 0xff
/* Terminal Control Selectors */
#define COPY_PROTECT_CONTROL 0x01
/* Feature Unit Control Selectors */
#define MUTE_CONTROL 0x01
#define VOLUME_CONTROL 0x02
#define BASS_CONTROL 0x03
#define MID_CONTROL 0x04
#define TREBLE_CONTROL 0x05
#define GRAPHIC_EQUALIZER_CONTROL 0x06
#define AUTOMATIC_GAIN_CONTROL 0x07
#define DELAY_CONTROL 0x08
#define BASS_BOOST_CONTROL 0x09
#define LOUDNESS_CONTROL 0x0a
/* Endpoint Control Selectors */
#define SAMPLING_FREQ_CONTROL 0x01
#define PITCH_CONTROL 0x02

View File

@ -60,6 +60,7 @@
#include <linux/tty_flip.h>
#include <linux/module.h>
#include <linux/smp_lock.h>
#include <linux/mutex.h>
#include <asm/uaccess.h>
#include <linux/usb.h>
#include <linux/usb_cdc.h>
@ -80,7 +81,7 @@ static struct usb_driver acm_driver;
static struct tty_driver *acm_tty_driver;
static struct acm *acm_table[ACM_TTY_MINORS];
static DECLARE_MUTEX(open_sem);
static DEFINE_MUTEX(open_mutex);
#define ACM_READY(acm) (acm && acm->dev && acm->used)
@ -431,8 +432,8 @@ static int acm_tty_open(struct tty_struct *tty, struct file *filp)
int rv = -EINVAL;
int i;
dbg("Entering acm_tty_open.\n");
down(&open_sem);
mutex_lock(&open_mutex);
acm = acm_table[tty->index];
if (!acm || !acm->dev)
@ -474,14 +475,14 @@ static int acm_tty_open(struct tty_struct *tty, struct file *filp)
done:
err_out:
up(&open_sem);
mutex_unlock(&open_mutex);
return rv;
full_bailout:
usb_kill_urb(acm->ctrlurb);
bail_out:
acm->used--;
up(&open_sem);
mutex_unlock(&open_mutex);
return -EIO;
}
@ -507,7 +508,7 @@ static void acm_tty_close(struct tty_struct *tty, struct file *filp)
if (!acm || !acm->used)
return;
down(&open_sem);
mutex_lock(&open_mutex);
if (!--acm->used) {
if (acm->dev) {
acm_set_control(acm, acm->ctrlout = 0);
@ -518,7 +519,7 @@ static void acm_tty_close(struct tty_struct *tty, struct file *filp)
} else
acm_tty_unregister(acm);
}
up(&open_sem);
mutex_unlock(&open_mutex);
}
static int acm_tty_write(struct tty_struct *tty, const unsigned char *buf, int count)
@ -1013,9 +1014,9 @@ static void acm_disconnect(struct usb_interface *intf)
return;
}
down(&open_sem);
mutex_lock(&open_mutex);
if (!usb_get_intfdata(intf)) {
up(&open_sem);
mutex_unlock(&open_mutex);
return;
}
acm->dev = NULL;
@ -1045,11 +1046,11 @@ static void acm_disconnect(struct usb_interface *intf)
if (!acm->used) {
acm_tty_unregister(acm);
up(&open_sem);
mutex_unlock(&open_mutex);
return;
}
up(&open_sem);
mutex_unlock(&open_mutex);
if (acm->tty)
tty_hangup(acm->tty);

File diff suppressed because it is too large Load Diff

View File

@ -1,164 +0,0 @@
/*
usb-midi.h -- USB-MIDI driver
Copyright (C) 2001
NAGANO Daisuke <breeze.nagano@nifty.ne.jp>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2, or (at your option)
any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/* ------------------------------------------------------------------------- */
#ifndef _USB_MIDI_H_
#define _USB_MIDI_H_
#ifndef USB_SUBCLASS_MIDISTREAMING
#define USB_SUBCLASS_MIDISTREAMING 3
#endif
/* ------------------------------------------------------------------------- */
/* Roland MIDI Devices */
#define USB_VENDOR_ID_ROLAND 0x0582
#define USBMIDI_ROLAND_UA100G 0x0000
#define USBMIDI_ROLAND_MPU64 0x0002
#define USBMIDI_ROLAND_SC8850 0x0003
#define USBMIDI_ROLAND_SC8820 0x0007
#define USBMIDI_ROLAND_UM2 0x0005
#define USBMIDI_ROLAND_UM1 0x0009
#define USBMIDI_ROLAND_PC300 0x0008
/* YAMAHA MIDI Devices */
#define USB_VENDOR_ID_YAMAHA 0x0499
#define USBMIDI_YAMAHA_MU1000 0x1001
/* Steinberg MIDI Devices */
#define USB_VENDOR_ID_STEINBERG 0x0763
#define USBMIDI_STEINBERG_USB2MIDI 0x1001
/* Mark of the Unicorn MIDI Devices */
#define USB_VENDOR_ID_MOTU 0x07fd
#define USBMIDI_MOTU_FASTLANE 0x0001
/* ------------------------------------------------------------------------- */
/* Supported devices */
struct usb_midi_endpoint {
int endpoint;
int cableId; /* if bit-n == 1 then cableId-n is enabled (n: 0 - 15) */
};
struct usb_midi_device {
char *deviceName;
u16 idVendor;
u16 idProduct;
int interface;
int altSetting; /* -1: auto detect */
struct usb_midi_endpoint in[15];
struct usb_midi_endpoint out[15];
};
static struct usb_midi_device usb_midi_devices[] = {
{ /* Roland UM-1 */
"Roland UM-1",
USB_VENDOR_ID_ROLAND, USBMIDI_ROLAND_UM1, 2, -1,
{ { 0x81, 1 }, {-1, -1} },
{ { 0x01, 1,}, {-1, -1} },
},
{ /* Roland UM-2 */
"Roland UM-2" ,
USB_VENDOR_ID_ROLAND, USBMIDI_ROLAND_UM2, 2, -1,
{ { 0x81, 3 }, {-1, -1} },
{ { 0x01, 3,}, {-1, -1} },
},
/** Next entry courtesy research by Michael Minn <michael@michaelminn.com> **/
{ /* Roland UA-100 */
"Roland UA-100",
USB_VENDOR_ID_ROLAND, USBMIDI_ROLAND_UA100G, 2, -1,
{ { 0x82, 7 }, {-1, -1} }, /** cables 0,1 and 2 for SYSEX **/
{ { 0x02, 7 }, {-1, -1} },
},
/** Next entry courtesy research by Michael Minn <michael@michaelminn.com> **/
{ /* Roland SC8850 */
"Roland SC8850",
USB_VENDOR_ID_ROLAND, USBMIDI_ROLAND_SC8850, 2, -1,
{ { 0x81, 0x3f }, {-1, -1} },
{ { 0x01, 0x3f }, {-1, -1} },
},
{ /* Roland SC8820 */
"Roland SC8820",
USB_VENDOR_ID_ROLAND, USBMIDI_ROLAND_SC8820, 2, -1,
{ { 0x81, 0x13 }, {-1, -1} },
{ { 0x01, 0x13 }, {-1, -1} },
},
{ /* Roland SC8820 */
"Roland SC8820",
USB_VENDOR_ID_ROLAND, USBMIDI_ROLAND_SC8820, 2, -1,
{ { 0x81, 17 }, {-1, -1} },
{ { 0x01, 17 }, {-1, -1} },
},
{ /* YAMAHA MU1000 */
"YAMAHA MU1000",
USB_VENDOR_ID_YAMAHA, USBMIDI_YAMAHA_MU1000, 0, -1,
{ { 0x81, 1 }, {-1, -1} },
{ { 0x01, 15 }, {-1, -1} },
},
{ /* Roland PC-300 */
"Roland PC-300",
USB_VENDOR_ID_ROLAND, USBMIDI_ROLAND_PC300, 2, -1,
{ { 0x81, 1 }, {-1, -1} },
{ { 0x01, 1 }, {-1, -1} },
},
{ /* MOTU Fastlane USB */
"MOTU Fastlane USB",
USB_VENDOR_ID_MOTU, USBMIDI_MOTU_FASTLANE, 1, 0,
{ { 0x82, 3 }, {-1, -1} },
{ { 0x02, 3 }, {-1, -1} },
}
};
#define VENDOR_SPECIFIC_USB_MIDI_DEVICES (sizeof(usb_midi_devices)/sizeof(struct usb_midi_device))
/* for Hot-Plugging */
static struct usb_device_id usb_midi_ids [] = {
{ .match_flags = (USB_DEVICE_ID_MATCH_INT_CLASS | USB_DEVICE_ID_MATCH_INT_SUBCLASS),
.bInterfaceClass = USB_CLASS_AUDIO, .bInterfaceSubClass = USB_SUBCLASS_MIDISTREAMING},
{ USB_DEVICE( USB_VENDOR_ID_ROLAND, USBMIDI_ROLAND_UM1 ) },
{ USB_DEVICE( USB_VENDOR_ID_ROLAND, USBMIDI_ROLAND_UM2 ) },
{ USB_DEVICE( USB_VENDOR_ID_ROLAND, USBMIDI_ROLAND_UA100G ) },
{ USB_DEVICE( USB_VENDOR_ID_ROLAND, USBMIDI_ROLAND_PC300 ) },
{ USB_DEVICE( USB_VENDOR_ID_ROLAND, USBMIDI_ROLAND_SC8850 ) },
{ USB_DEVICE( USB_VENDOR_ID_ROLAND, USBMIDI_ROLAND_SC8820 ) },
{ USB_DEVICE( USB_VENDOR_ID_YAMAHA, USBMIDI_YAMAHA_MU1000 ) },
{ USB_DEVICE( USB_VENDOR_ID_MOTU, USBMIDI_MOTU_FASTLANE ) },
/* { USB_DEVICE( USB_VENDOR_ID_STEINBERG, USBMIDI_STEINBERG_USB2MIDI ) },*/
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE (usb, usb_midi_ids);
/* ------------------------------------------------------------------------- */
#endif /* _USB_MIDI_H_ */

View File

@ -55,6 +55,7 @@
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/lp.h>
#include <linux/mutex.h>
#undef DEBUG
#include <linux/usb.h>
@ -223,7 +224,7 @@ static int usblp_cache_device_id_string(struct usblp *usblp);
/* forward reference to make our lives easier */
static struct usb_driver usblp_driver;
static DECLARE_MUTEX(usblp_sem); /* locks the existence of usblp's */
static DEFINE_MUTEX(usblp_mutex); /* locks the existence of usblp's */
/*
* Functions for usblp control messages.
@ -351,7 +352,7 @@ static int usblp_open(struct inode *inode, struct file *file)
if (minor < 0)
return -ENODEV;
down (&usblp_sem);
mutex_lock (&usblp_mutex);
retval = -ENODEV;
intf = usb_find_interface(&usblp_driver, minor);
@ -399,7 +400,7 @@ static int usblp_open(struct inode *inode, struct file *file)
}
}
out:
up (&usblp_sem);
mutex_unlock (&usblp_mutex);
return retval;
}
@ -425,13 +426,13 @@ static int usblp_release(struct inode *inode, struct file *file)
{
struct usblp *usblp = file->private_data;
down (&usblp_sem);
mutex_lock (&usblp_mutex);
usblp->used = 0;
if (usblp->present) {
usblp_unlink_urbs(usblp);
} else /* finish cleanup from disconnect */
usblp_cleanup (usblp);
up (&usblp_sem);
mutex_unlock (&usblp_mutex);
return 0;
}
@ -1152,7 +1153,7 @@ static void usblp_disconnect(struct usb_interface *intf)
device_remove_file(&intf->dev, &dev_attr_ieee1284_id);
down (&usblp_sem);
mutex_lock (&usblp_mutex);
down (&usblp->sem);
usblp->present = 0;
usb_set_intfdata (intf, NULL);
@ -1166,7 +1167,7 @@ static void usblp_disconnect(struct usb_interface *intf)
if (!usblp->used)
usblp_cleanup (usblp);
up (&usblp_sem);
mutex_unlock (&usblp_mutex);
}
static struct usb_device_id usblp_ids [] = {

View File

@ -57,6 +57,7 @@
#include <linux/usb.h>
#include <linux/smp_lock.h>
#include <linux/usbdevice_fs.h>
#include <linux/mutex.h>
#include <asm/uaccess.h>
#include "usb.h"
@ -570,7 +571,7 @@ static ssize_t usb_device_read(struct file *file, char __user *buf, size_t nbyte
if (!access_ok(VERIFY_WRITE, buf, nbytes))
return -EFAULT;
down (&usb_bus_list_lock);
mutex_lock(&usb_bus_list_lock);
/* print devices for all busses */
list_for_each_entry(bus, &usb_bus_list, bus_list) {
/* recurse through all children of the root hub */
@ -580,12 +581,12 @@ static ssize_t usb_device_read(struct file *file, char __user *buf, size_t nbyte
ret = usb_device_dump(&buf, &nbytes, &skip_bytes, ppos, bus->root_hub, bus, 0, 0, 0);
usb_unlock_device(bus->root_hub);
if (ret < 0) {
up(&usb_bus_list_lock);
mutex_unlock(&usb_bus_list_lock);
return ret;
}
total_written += ret;
}
up (&usb_bus_list_lock);
mutex_unlock(&usb_bus_list_lock);
return total_written;
}

View File

@ -134,26 +134,21 @@ static ssize_t usbdev_read(struct file *file, char __user *buf, size_t nbytes, l
}
if (pos < sizeof(struct usb_device_descriptor)) {
struct usb_device_descriptor *desc = kmalloc(sizeof(*desc), GFP_KERNEL);
if (!desc) {
ret = -ENOMEM;
goto err;
}
memcpy(desc, &dev->descriptor, sizeof(dev->descriptor));
le16_to_cpus(&desc->bcdUSB);
le16_to_cpus(&desc->idVendor);
le16_to_cpus(&desc->idProduct);
le16_to_cpus(&desc->bcdDevice);
struct usb_device_descriptor temp_desc ; /* 18 bytes - fits on the stack */
memcpy(&temp_desc, &dev->descriptor, sizeof(dev->descriptor));
le16_to_cpus(&temp_desc.bcdUSB);
le16_to_cpus(&temp_desc.idVendor);
le16_to_cpus(&temp_desc.idProduct);
le16_to_cpus(&temp_desc.bcdDevice);
len = sizeof(struct usb_device_descriptor) - pos;
if (len > nbytes)
len = nbytes;
if (copy_to_user(buf, ((char *)desc) + pos, len)) {
kfree(desc);
if (copy_to_user(buf, ((char *)&temp_desc) + pos, len)) {
ret = -EFAULT;
goto err;
}
kfree(desc);
*ppos += len;
buf += len;
@ -498,7 +493,8 @@ static int check_ctrlrecip(struct dev_state *ps, unsigned int requesttype, unsig
{
int ret = 0;
if (ps->dev->state != USB_STATE_CONFIGURED)
if (ps->dev->state != USB_STATE_ADDRESS
&& ps->dev->state != USB_STATE_CONFIGURED)
return -EHOSTUNREACH;
if (USB_TYPE_VENDOR == (USB_TYPE_MASK & requesttype))
return 0;

View File

@ -264,14 +264,19 @@ int usb_hcd_pci_suspend (struct pci_dev *dev, pm_message_t message)
*/
retval = pci_set_power_state (dev, PCI_D3hot);
if (retval == 0) {
dev_dbg (hcd->self.controller, "--> PCI D3\n");
int wake = device_can_wakeup(&hcd->self.root_hub->dev);
wake = wake && device_may_wakeup(hcd->self.controller);
dev_dbg (hcd->self.controller, "--> PCI D3%s\n",
wake ? "/wakeup" : "");
/* Ignore these return values. We rely on pci code to
* reject requests the hardware can't implement, rather
* than coding the same thing.
*/
(void) pci_enable_wake (dev, PCI_D3hot, hcd->remote_wakeup);
(void) pci_enable_wake (dev, PCI_D3cold, hcd->remote_wakeup);
(void) pci_enable_wake (dev, PCI_D3hot, wake);
(void) pci_enable_wake (dev, PCI_D3cold, wake);
} else {
dev_dbg (&dev->dev, "PCI D3 suspend fail, %d\n",
retval);

View File

@ -34,6 +34,7 @@
#include <asm/scatterlist.h>
#include <linux/device.h>
#include <linux/dma-mapping.h>
#include <linux/mutex.h>
#include <asm/irq.h>
#include <asm/byteorder.h>
@ -93,7 +94,7 @@ struct usb_busmap {
static struct usb_busmap busmap;
/* used when updating list of hcds */
DECLARE_MUTEX (usb_bus_list_lock); /* exported only for usbfs */
DEFINE_MUTEX(usb_bus_list_lock); /* exported only for usbfs */
EXPORT_SYMBOL_GPL (usb_bus_list_lock);
/* used for controlling access to virtual root hubs */
@ -366,21 +367,39 @@ static int rh_call_control (struct usb_hcd *hcd, struct urb *urb)
/* DEVICE REQUESTS */
/* The root hub's remote wakeup enable bit is implemented using
* driver model wakeup flags. If this system supports wakeup
* through USB, userspace may change the default "allow wakeup"
* policy through sysfs or these calls.
*
* Most root hubs support wakeup from downstream devices, for
* runtime power management (disabling USB clocks and reducing
* VBUS power usage). However, not all of them do so; silicon,
* board, and BIOS bugs here are not uncommon, so these can't
* be treated quite like external hubs.
*
* Likewise, not all root hubs will pass wakeup events upstream,
* to wake up the whole system. So don't assume root hub and
* controller capabilities are identical.
*/
case DeviceRequest | USB_REQ_GET_STATUS:
tbuf [0] = (hcd->remote_wakeup << USB_DEVICE_REMOTE_WAKEUP)
tbuf [0] = (device_may_wakeup(&hcd->self.root_hub->dev)
<< USB_DEVICE_REMOTE_WAKEUP)
| (1 << USB_DEVICE_SELF_POWERED);
tbuf [1] = 0;
len = 2;
break;
case DeviceOutRequest | USB_REQ_CLEAR_FEATURE:
if (wValue == USB_DEVICE_REMOTE_WAKEUP)
hcd->remote_wakeup = 0;
device_set_wakeup_enable(&hcd->self.root_hub->dev, 0);
else
goto error;
break;
case DeviceOutRequest | USB_REQ_SET_FEATURE:
if (hcd->can_wakeup && wValue == USB_DEVICE_REMOTE_WAKEUP)
hcd->remote_wakeup = 1;
if (device_can_wakeup(&hcd->self.root_hub->dev)
&& wValue == USB_DEVICE_REMOTE_WAKEUP)
device_set_wakeup_enable(&hcd->self.root_hub->dev, 1);
else
goto error;
break;
@ -409,7 +428,7 @@ static int rh_call_control (struct usb_hcd *hcd, struct urb *urb)
bufp = fs_rh_config_descriptor;
len = sizeof fs_rh_config_descriptor;
}
if (hcd->can_wakeup)
if (device_can_wakeup(&hcd->self.root_hub->dev))
patch_wakeup = 1;
break;
case USB_DT_STRING << 8:
@ -761,14 +780,14 @@ static int usb_register_bus(struct usb_bus *bus)
{
int busnum;
down (&usb_bus_list_lock);
mutex_lock(&usb_bus_list_lock);
busnum = find_next_zero_bit (busmap.busmap, USB_MAXBUS, 1);
if (busnum < USB_MAXBUS) {
set_bit (busnum, busmap.busmap);
bus->busnum = busnum;
} else {
printk (KERN_ERR "%s: too many buses\n", usbcore_name);
up(&usb_bus_list_lock);
mutex_unlock(&usb_bus_list_lock);
return -E2BIG;
}
@ -776,7 +795,7 @@ static int usb_register_bus(struct usb_bus *bus)
bus->controller, "usb_host%d", busnum);
if (IS_ERR(bus->class_dev)) {
clear_bit(busnum, busmap.busmap);
up(&usb_bus_list_lock);
mutex_unlock(&usb_bus_list_lock);
return PTR_ERR(bus->class_dev);
}
@ -784,7 +803,7 @@ static int usb_register_bus(struct usb_bus *bus)
/* Add it to the local list of buses */
list_add (&bus->bus_list, &usb_bus_list);
up (&usb_bus_list_lock);
mutex_unlock(&usb_bus_list_lock);
usb_notify_add_bus(bus);
@ -809,9 +828,9 @@ static void usb_deregister_bus (struct usb_bus *bus)
* controller code, as well as having it call this when cleaning
* itself up
*/
down (&usb_bus_list_lock);
mutex_lock(&usb_bus_list_lock);
list_del (&bus->bus_list);
up (&usb_bus_list_lock);
mutex_unlock(&usb_bus_list_lock);
usb_notify_remove_bus(bus);
@ -822,18 +841,17 @@ static void usb_deregister_bus (struct usb_bus *bus)
/**
* register_root_hub - called by usb_add_hcd() to register a root hub
* @usb_dev: the usb root hub device to be registered.
* @hcd: host controller for this root hub
*
* This function registers the root hub with the USB subsystem. It sets up
* the device properly in the device tree and stores the root_hub pointer
* in the bus structure, then calls usb_new_device() to register the usb
* device. It also assigns the root hub's USB address (always 1).
* the device properly in the device tree and then calls usb_new_device()
* to register the usb device. It also assigns the root hub's USB address
* (always 1).
*/
static int register_root_hub (struct usb_device *usb_dev,
struct usb_hcd *hcd)
static int register_root_hub(struct usb_hcd *hcd)
{
struct device *parent_dev = hcd->self.controller;
struct usb_device *usb_dev = hcd->self.root_hub;
const int devnum = 1;
int retval;
@ -844,14 +862,12 @@ static int register_root_hub (struct usb_device *usb_dev,
set_bit (devnum, usb_dev->bus->devmap.devicemap);
usb_set_device_state(usb_dev, USB_STATE_ADDRESS);
down (&usb_bus_list_lock);
usb_dev->bus->root_hub = usb_dev;
mutex_lock(&usb_bus_list_lock);
usb_dev->ep0.desc.wMaxPacketSize = __constant_cpu_to_le16(64);
retval = usb_get_device_descriptor(usb_dev, USB_DT_DEVICE_SIZE);
if (retval != sizeof usb_dev->descriptor) {
usb_dev->bus->root_hub = NULL;
up (&usb_bus_list_lock);
mutex_unlock(&usb_bus_list_lock);
dev_dbg (parent_dev, "can't read %s device descriptor %d\n",
usb_dev->dev.bus_id, retval);
return (retval < 0) ? retval : -EMSGSIZE;
@ -859,11 +875,10 @@ static int register_root_hub (struct usb_device *usb_dev,
retval = usb_new_device (usb_dev);
if (retval) {
usb_dev->bus->root_hub = NULL;
dev_err (parent_dev, "can't register root hub for %s, %d\n",
usb_dev->dev.bus_id, retval);
}
up (&usb_bus_list_lock);
mutex_unlock(&usb_bus_list_lock);
if (retval == 0) {
spin_lock_irq (&hcd_root_hub_lock);
@ -1090,7 +1105,6 @@ static void urb_unlink (struct urb *urb)
spin_lock_irqsave (&hcd_data_lock, flags);
list_del_init (&urb->urb_list);
spin_unlock_irqrestore (&hcd_data_lock, flags);
usb_put_dev (urb->dev);
}
@ -1130,7 +1144,6 @@ static int hcd_submit_urb (struct urb *urb, gfp_t mem_flags)
case HC_STATE_RUNNING:
case HC_STATE_RESUMING:
doit:
usb_get_dev (urb->dev);
list_add_tail (&urb->urb_list, &ep->urb_list);
status = 0;
break;
@ -1771,12 +1784,10 @@ int usb_add_hcd(struct usb_hcd *hcd,
set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
/* till now HC has been in an indeterminate state ... */
if (hcd->driver->reset && (retval = hcd->driver->reset(hcd)) < 0) {
dev_err(hcd->self.controller, "can't reset\n");
return retval;
}
/* HC is in reset state, but accessible. Now do the one-time init,
* bottom up so that hcds can customize the root hubs before khubd
* starts talking to them. (Note, bus id is assigned early too.)
*/
if ((retval = hcd_buffer_create(hcd)) != 0) {
dev_dbg(hcd->self.controller, "pool alloc failed\n");
return retval;
@ -1785,6 +1796,36 @@ int usb_add_hcd(struct usb_hcd *hcd,
if ((retval = usb_register_bus(&hcd->self)) < 0)
goto err_register_bus;
if ((rhdev = usb_alloc_dev(NULL, &hcd->self, 0)) == NULL) {
dev_err(hcd->self.controller, "unable to allocate root hub\n");
retval = -ENOMEM;
goto err_allocate_root_hub;
}
rhdev->speed = (hcd->driver->flags & HCD_USB2) ? USB_SPEED_HIGH :
USB_SPEED_FULL;
hcd->self.root_hub = rhdev;
/* "reset" is misnamed; its role is now one-time init. the controller
* should already have been reset (and boot firmware kicked off etc).
*/
if (hcd->driver->reset && (retval = hcd->driver->reset(hcd)) < 0) {
dev_err(hcd->self.controller, "can't setup\n");
goto err_hcd_driver_setup;
}
/* wakeup flag init is in transition; for now we can't rely on PCI to
* initialize these bits properly, so we let reset() override it.
* This init should _precede_ the reset() once PCI behaves.
*/
device_init_wakeup(&rhdev->dev,
device_can_wakeup(hcd->self.controller));
/* NOTE: root hub and controller capabilities may not be the same */
if (device_can_wakeup(hcd->self.controller)
&& device_can_wakeup(&hcd->self.root_hub->dev))
dev_dbg(hcd->self.controller, "supports USB remote wakeup\n");
/* enable irqs just before we start the controller */
if (hcd->driver->irq) {
char buf[8], *bufp = buf;
@ -1816,56 +1857,32 @@ int usb_add_hcd(struct usb_hcd *hcd,
(unsigned long long)hcd->rsrc_start);
}
/* Allocate the root hub before calling hcd->driver->start(),
* but don't register it until afterward so that the hardware
* is running.
*/
if ((rhdev = usb_alloc_dev(NULL, &hcd->self, 0)) == NULL) {
dev_err(hcd->self.controller, "unable to allocate root hub\n");
retval = -ENOMEM;
goto err_allocate_root_hub;
}
/* Although in principle hcd->driver->start() might need to use rhdev,
* none of the current drivers do.
*/
if ((retval = hcd->driver->start(hcd)) < 0) {
dev_err(hcd->self.controller, "startup error %d\n", retval);
goto err_hcd_driver_start;
}
/* hcd->driver->start() reported can_wakeup, probably with
* assistance from board's boot firmware.
* NOTE: normal devices won't enable wakeup by default.
*/
if (hcd->can_wakeup)
dev_dbg(hcd->self.controller, "supports USB remote wakeup\n");
hcd->remote_wakeup = hcd->can_wakeup;
rhdev->speed = (hcd->driver->flags & HCD_USB2) ? USB_SPEED_HIGH :
USB_SPEED_FULL;
/* starting here, usbcore will pay attention to this root hub */
rhdev->bus_mA = min(500u, hcd->power_budget);
if ((retval = register_root_hub(rhdev, hcd)) != 0)
if ((retval = register_root_hub(hcd)) != 0)
goto err_register_root_hub;
if (hcd->uses_new_polling && hcd->poll_rh)
usb_hcd_poll_rh_status(hcd);
return retval;
err_register_root_hub:
err_register_root_hub:
hcd->driver->stop(hcd);
err_hcd_driver_start:
usb_put_dev(rhdev);
err_allocate_root_hub:
err_hcd_driver_start:
if (hcd->irq >= 0)
free_irq(irqnum, hcd);
err_request_irq:
err_request_irq:
err_hcd_driver_setup:
hcd->self.root_hub = NULL;
usb_put_dev(rhdev);
err_allocate_root_hub:
usb_deregister_bus(&hcd->self);
err_register_bus:
err_register_bus:
hcd_buffer_destroy(hcd);
return retval;
}
@ -1891,9 +1908,9 @@ void usb_remove_hcd(struct usb_hcd *hcd)
hcd->rh_registered = 0;
spin_unlock_irq (&hcd_root_hub_lock);
down(&usb_bus_list_lock);
mutex_lock(&usb_bus_list_lock);
usb_disconnect(&hcd->self.root_hub);
up(&usb_bus_list_lock);
mutex_unlock(&usb_bus_list_lock);
hcd->poll_rh = 0;
del_timer_sync(&hcd->rh_timer);

View File

@ -78,8 +78,6 @@ struct usb_hcd { /* usb_bus.hcpriv points to this */
#define HCD_FLAG_HW_ACCESSIBLE 0x00000001
#define HCD_FLAG_SAW_IRQ 0x00000002
unsigned can_wakeup:1; /* hw supports wakeup? */
unsigned remote_wakeup:1;/* sw should use wakeup? */
unsigned rh_registered:1;/* is root hub registered? */
/* The next flag is a stopgap, to be removed when all the HCDs
@ -364,7 +362,7 @@ extern void usb_set_device_state(struct usb_device *udev,
/* exported only within usbcore */
extern struct list_head usb_bus_list;
extern struct semaphore usb_bus_list_lock;
extern struct mutex usb_bus_list_lock;
extern wait_queue_head_t usb_kill_urb_queue;
extern struct usb_bus *usb_bus_get (struct usb_bus *bus);

View File

@ -22,6 +22,7 @@
#include <linux/usb.h>
#include <linux/usbdevice_fs.h>
#include <linux/kthread.h>
#include <linux/mutex.h>
#include <asm/semaphore.h>
#include <asm/uaccess.h>
@ -1005,12 +1006,18 @@ void usb_set_device_state(struct usb_device *udev,
; /* do nothing */
else if (new_state != USB_STATE_NOTATTACHED) {
udev->state = new_state;
if (new_state == USB_STATE_CONFIGURED)
device_init_wakeup(&udev->dev,
(udev->actconfig->desc.bmAttributes
& USB_CONFIG_ATT_WAKEUP));
else if (new_state != USB_STATE_SUSPENDED)
device_init_wakeup(&udev->dev, 0);
/* root hub wakeup capabilities are managed out-of-band
* and may involve silicon errata ... ignore them here.
*/
if (udev->parent) {
if (new_state == USB_STATE_CONFIGURED)
device_init_wakeup(&udev->dev,
(udev->actconfig->desc.bmAttributes
& USB_CONFIG_ATT_WAKEUP));
else if (new_state != USB_STATE_SUSPENDED)
device_init_wakeup(&udev->dev, 0);
}
} else
recursively_mark_NOTATTACHED(udev);
spin_unlock_irqrestore(&device_state_lock, flags);
@ -1172,8 +1179,11 @@ static int choose_configuration(struct usb_device *udev)
c = udev->config;
num_configs = udev->descriptor.bNumConfigurations;
for (i = 0; i < num_configs; (i++, c++)) {
struct usb_interface_descriptor *desc =
&c->intf_cache[0]->altsetting->desc;
struct usb_interface_descriptor *desc = NULL;
/* It's possible that a config has no interfaces! */
if (c->desc.bNumInterfaces > 0)
desc = &c->intf_cache[0]->altsetting->desc;
/*
* HP's USB bus-powered keyboard has only one configuration
@ -1208,7 +1218,8 @@ static int choose_configuration(struct usb_device *udev)
/* If the first config's first interface is COMM/2/0xff
* (MSFT RNDIS), rule it out unless Linux has host-side
* RNDIS support. */
if (i == 0 && desc->bInterfaceClass == USB_CLASS_COMM
if (i == 0 && desc
&& desc->bInterfaceClass == USB_CLASS_COMM
&& desc->bInterfaceSubClass == 2
&& desc->bInterfaceProtocol == 0xff) {
#ifndef CONFIG_USB_NET_RNDIS
@ -1224,8 +1235,8 @@ static int choose_configuration(struct usb_device *udev)
* than a vendor-specific driver. */
else if (udev->descriptor.bDeviceClass !=
USB_CLASS_VENDOR_SPEC &&
desc->bInterfaceClass !=
USB_CLASS_VENDOR_SPEC) {
(!desc || desc->bInterfaceClass !=
USB_CLASS_VENDOR_SPEC)) {
best = c;
break;
}
@ -1876,18 +1887,18 @@ int usb_resume_device(struct usb_device *udev)
if (udev->state == USB_STATE_NOTATTACHED)
return -ENODEV;
#ifdef CONFIG_USB_SUSPEND
/* selective resume of one downstream hub-to-device port */
if (udev->parent) {
#ifdef CONFIG_USB_SUSPEND
if (udev->state == USB_STATE_SUSPENDED) {
// NOTE swsusp may bork us, device state being wrong...
// NOTE this fails if parent is also suspended...
status = hub_port_resume(hdev_to_hub(udev->parent),
udev->portnum, udev);
} else
#endif
status = 0;
} else
#endif
status = finish_device_resume(udev);
if (status < 0)
dev_dbg(&udev->dev, "can't resume, status %d\n",
@ -2162,7 +2173,7 @@ static int
hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
int retry_counter)
{
static DECLARE_MUTEX(usb_address0_sem);
static DEFINE_MUTEX(usb_address0_mutex);
struct usb_device *hdev = hub->hdev;
int i, j, retval;
@ -2183,7 +2194,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
if (oldspeed == USB_SPEED_LOW)
delay = HUB_LONG_RESET_TIME;
down(&usb_address0_sem);
mutex_lock(&usb_address0_mutex);
/* Reset the device; full speed may morph to high speed */
retval = hub_port_reset(hub, port1, udev, delay);
@ -2381,7 +2392,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
fail:
if (retval)
hub_port_disable(hub, port1, 0);
up(&usb_address0_sem);
mutex_unlock(&usb_address0_mutex);
return retval;
}
@ -3017,7 +3028,7 @@ int usb_reset_device(struct usb_device *udev)
parent_hub = hdev_to_hub(parent_hdev);
/* If we're resetting an active hub, take some special actions */
if (udev->actconfig &&
if (udev->actconfig && udev->actconfig->desc.bNumInterfaces > 0 &&
udev->actconfig->interface[0]->dev.driver ==
&hub_driver.driver &&
(hub = hdev_to_hub(udev)) != NULL) {

View File

@ -631,8 +631,8 @@ int usb_get_descriptor(struct usb_device *dev, unsigned char type, unsigned char
* Returns the number of bytes received on success, or else the status code
* returned by the underlying usb_control_msg() call.
*/
int usb_get_string(struct usb_device *dev, unsigned short langid,
unsigned char index, void *buf, int size)
static int usb_get_string(struct usb_device *dev, unsigned short langid,
unsigned char index, void *buf, int size)
{
int i;
int result;
@ -1388,11 +1388,13 @@ free_interfaces:
if (dev->state != USB_STATE_ADDRESS)
usb_disable_device (dev, 1); // Skip ep0
i = dev->bus_mA - cp->desc.bMaxPower * 2;
if (i < 0)
dev_warn(&dev->dev, "new config #%d exceeds power "
"limit by %dmA\n",
configuration, -i);
if (cp) {
i = dev->bus_mA - cp->desc.bMaxPower * 2;
if (i < 0)
dev_warn(&dev->dev, "new config #%d exceeds power "
"limit by %dmA\n",
configuration, -i);
}
if ((ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
USB_REQ_SET_CONFIGURATION, 0, configuration, 0,
@ -1488,7 +1490,6 @@ EXPORT_SYMBOL(usb_sg_wait);
// synchronous control message convenience routines
EXPORT_SYMBOL(usb_get_descriptor);
EXPORT_SYMBOL(usb_get_status);
EXPORT_SYMBOL(usb_get_string);
EXPORT_SYMBOL(usb_string);
// synchronous calls that also maintain usbcore state

View File

@ -13,16 +13,17 @@
#include <linux/kernel.h>
#include <linux/notifier.h>
#include <linux/usb.h>
#include <linux/mutex.h>
#include "usb.h"
static struct notifier_block *usb_notifier_list;
static DECLARE_MUTEX(usb_notifier_lock);
static DEFINE_MUTEX(usb_notifier_lock);
static void usb_notifier_chain_register(struct notifier_block **list,
struct notifier_block *n)
{
down(&usb_notifier_lock);
mutex_lock(&usb_notifier_lock);
while (*list) {
if (n->priority > (*list)->priority)
break;
@ -30,13 +31,13 @@ static void usb_notifier_chain_register(struct notifier_block **list,
}
n->next = *list;
*list = n;
up(&usb_notifier_lock);
mutex_unlock(&usb_notifier_lock);
}
static void usb_notifier_chain_unregister(struct notifier_block **nl,
struct notifier_block *n)
{
down(&usb_notifier_lock);
mutex_lock(&usb_notifier_lock);
while ((*nl)!=NULL) {
if ((*nl)==n) {
*nl = n->next;
@ -45,7 +46,7 @@ static void usb_notifier_chain_unregister(struct notifier_block **nl,
nl=&((*nl)->next);
}
exit:
up(&usb_notifier_lock);
mutex_unlock(&usb_notifier_lock);
}
static int usb_notifier_call_chain(struct notifier_block **n,
@ -54,7 +55,7 @@ static int usb_notifier_call_chain(struct notifier_block **n,
int ret=NOTIFY_DONE;
struct notifier_block *nb = *n;
down(&usb_notifier_lock);
mutex_lock(&usb_notifier_lock);
while (nb) {
ret = nb->notifier_call(nb,val,v);
if (ret&NOTIFY_STOP_MASK) {
@ -63,7 +64,7 @@ static int usb_notifier_call_chain(struct notifier_block **n,
nb = nb->next;
}
exit:
up(&usb_notifier_lock);
mutex_unlock(&usb_notifier_lock);
return ret;
}

View File

@ -33,6 +33,7 @@
#include <linux/errno.h>
#include <linux/smp_lock.h>
#include <linux/usb.h>
#include <linux/mutex.h>
#include <asm/io.h>
#include <asm/scatterlist.h>
@ -639,7 +640,7 @@ struct usb_device *usb_find_device(u16 vendor_id, u16 product_id)
struct usb_bus *bus;
struct usb_device *dev = NULL;
down(&usb_bus_list_lock);
mutex_lock(&usb_bus_list_lock);
for (buslist = usb_bus_list.next;
buslist != &usb_bus_list;
buslist = buslist->next) {
@ -653,7 +654,7 @@ struct usb_device *usb_find_device(u16 vendor_id, u16 product_id)
goto exit;
}
exit:
up(&usb_bus_list_lock);
mutex_unlock(&usb_bus_list_lock);
return dev;
}

View File

@ -187,6 +187,23 @@ config USB_OTG
Select this only if your OMAP board has a Mini-AB connector.
config USB_GADGET_AT91
boolean "AT91 USB Device Port"
depends on ARCH_AT91RM9200
select USB_GADGET_SELECTED
help
Many Atmel AT91 processors (such as the AT91RM2000) have a
full speed USB Device Port with support for five configurable
endpoints (plus endpoint zero).
Say "y" to link the driver statically, or "m" to build a
dynamically linked module called "at91_udc" and force all
gadget drivers to also be dynamically linked.
config USB_AT91
tristate
depends on USB_GADGET_AT91
default USB_GADGET
config USB_GADGET_DUMMY_HCD
boolean "Dummy HCD (DEVELOPMENT)"

View File

@ -7,6 +7,7 @@ obj-$(CONFIG_USB_PXA2XX) += pxa2xx_udc.o
obj-$(CONFIG_USB_GOKU) += goku_udc.o
obj-$(CONFIG_USB_OMAP) += omap_udc.o
obj-$(CONFIG_USB_LH7A40X) += lh7a40x_udc.o
obj-$(CONFIG_USB_AT91) += at91_udc.o
#
# USB gadget drivers

File diff suppressed because it is too large Load Diff

View File

@ -0,0 +1,181 @@
/*
* Copyright (C) 2004 by Thomas Rathbone, HP Labs
* Copyright (C) 2005 by Ivan Kokshaysky
* Copyright (C) 2006 by SAN People
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the
* Free Software Foundation, Inc.,
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
#ifndef AT91_UDC_H
#define AT91_UDC_H
/*
* USB Device Port (UDP) registers.
* Based on AT91RM9200 datasheet revision E.
*/
#define AT91_UDP_FRM_NUM 0x00 /* Frame Number Register */
#define AT91_UDP_NUM (0x7ff << 0) /* Frame Number */
#define AT91_UDP_FRM_ERR (1 << 16) /* Frame Error */
#define AT91_UDP_FRM_OK (1 << 17) /* Frame OK */
#define AT91_UDP_GLB_STAT 0x04 /* Global State Register */
#define AT91_UDP_FADDEN (1 << 0) /* Function Address Enable */
#define AT91_UDP_CONFG (1 << 1) /* Configured */
#define AT91_UDP_ESR (1 << 2) /* Enable Send Resume */
#define AT91_UDP_RSMINPR (1 << 3) /* Resume has been sent */
#define AT91_UDP_RMWUPE (1 << 4) /* Remote Wake Up Enable */
#define AT91_UDP_FADDR 0x08 /* Function Address Register */
#define AT91_UDP_FADD (0x7f << 0) /* Function Address Value */
#define AT91_UDP_FEN (1 << 8) /* Function Enable */
#define AT91_UDP_IER 0x10 /* Interrupt Enable Register */
#define AT91_UDP_IDR 0x14 /* Interrupt Disable Register */
#define AT91_UDP_IMR 0x18 /* Interrupt Mask Register */
#define AT91_UDP_ISR 0x1c /* Interrupt Status Register */
#define AT91_UDP_EP(n) (1 << (n)) /* Endpoint Interrupt Status */
#define AT91_UDP_RXSUSP (1 << 8) /* USB Suspend Interrupt Status */
#define AT91_UDP_RXRSM (1 << 9) /* USB Resume Interrupt Status */
#define AT91_UDP_EXTRSM (1 << 10) /* External Resume Interrupt Status */
#define AT91_UDP_SOFINT (1 << 11) /* Start of Frame Interrupt Status */
#define AT91_UDP_ENDBUSRES (1 << 12) /* End of Bus Reset Interrpt Status */
#define AT91_UDP_WAKEUP (1 << 13) /* USB Wakeup Interrupt Status */
#define AT91_UDP_ICR 0x20 /* Interrupt Clear Register */
#define AT91_UDP_RST_EP 0x28 /* Reset Endpoint Register */
#define AT91_UDP_CSR(n) (0x30+((n)*4)) /* Endpoint Control/Status Registers 0-7 */
#define AT91_UDP_TXCOMP (1 << 0) /* Generates IN packet with data previously written in DPR */
#define AT91_UDP_RX_DATA_BK0 (1 << 1) /* Receive Data Bank 0 */
#define AT91_UDP_RXSETUP (1 << 2) /* Send STALL to the host */
#define AT91_UDP_STALLSENT (1 << 3) /* Stall Sent / Isochronous error (Isochronous endpoints) */
#define AT91_UDP_TXPKTRDY (1 << 4) /* Transmit Packet Ready */
#define AT91_UDP_FORCESTALL (1 << 5) /* Force Stall */
#define AT91_UDP_RX_DATA_BK1 (1 << 6) /* Receive Data Bank 1 */
#define AT91_UDP_DIR (1 << 7) /* Transfer Direction */
#define AT91_UDP_EPTYPE (7 << 8) /* Endpoint Type */
#define AT91_UDP_EPTYPE_CTRL (0 << 8)
#define AT91_UDP_EPTYPE_ISO_OUT (1 << 8)
#define AT91_UDP_EPTYPE_BULK_OUT (2 << 8)
#define AT91_UDP_EPTYPE_INT_OUT (3 << 8)
#define AT91_UDP_EPTYPE_ISO_IN (5 << 8)
#define AT91_UDP_EPTYPE_BULK_IN (6 << 8)
#define AT91_UDP_EPTYPE_INT_IN (7 << 8)
#define AT91_UDP_DTGLE (1 << 11) /* Data Toggle */
#define AT91_UDP_EPEDS (1 << 15) /* Endpoint Enable/Disable */
#define AT91_UDP_RXBYTECNT (0x7ff << 16) /* Number of bytes in FIFO */
#define AT91_UDP_FDR(n) (0x50+((n)*4)) /* Endpoint FIFO Data Registers 0-7 */
#define AT91_UDP_TXVC 0x74 /* Transceiver Control Register */
#define AT91_UDP_TXVC_TXVDIS (1 << 8) /* Transceiver Disable */
/*-------------------------------------------------------------------------*/
/*
* controller driver data structures
*/
#define NUM_ENDPOINTS 6
/*
* hardware won't disable bus reset, or resume while the controller
* is suspended ... watching suspend helps keep the logic symmetric.
*/
#define MINIMUS_INTERRUPTUS \
(AT91_UDP_ENDBUSRES | AT91_UDP_RXRSM | AT91_UDP_RXSUSP)
struct at91_ep {
struct usb_ep ep;
struct list_head queue;
struct at91_udc *udc;
void __iomem *creg;
unsigned maxpacket:16;
u8 int_mask;
unsigned is_pingpong:1;
unsigned stopped:1;
unsigned is_in:1;
unsigned is_iso:1;
unsigned fifo_bank:1;
const struct usb_endpoint_descriptor
*desc;
};
/*
* driver is non-SMP, and just blocks IRQs whenever it needs
* access protection for chip registers or driver state
*/
struct at91_udc {
struct usb_gadget gadget;
struct at91_ep ep[NUM_ENDPOINTS];
struct usb_gadget_driver *driver;
unsigned vbus:1;
unsigned enabled:1;
unsigned clocked:1;
unsigned suspended:1;
unsigned req_pending:1;
unsigned wait_for_addr_ack:1;
unsigned wait_for_config_ack:1;
unsigned selfpowered:1;
u8 addr;
struct at91_udc_data board;
struct clk *iclk, *fclk;
struct platform_device *pdev;
struct proc_dir_entry *pde;
};
static inline struct at91_udc *to_udc(struct usb_gadget *g)
{
return container_of(g, struct at91_udc, gadget);
}
struct at91_request {
struct usb_request req;
struct list_head queue;
};
/*-------------------------------------------------------------------------*/
#ifdef DEBUG
#define DBG(stuff...) printk(KERN_DEBUG "udc: " stuff)
#else
#define DBG(stuff...) do{}while(0)
#endif
#ifdef VERBOSE
# define VDBG DBG
#else
# define VDBG(stuff...) do{}while(0)
#endif
#ifdef PACKET_TRACE
# define PACKET VDBG
#else
# define PACKET(stuff...) do{}while(0)
#endif
#define ERR(stuff...) printk(KERN_ERR "udc: " stuff)
#define WARN(stuff...) printk(KERN_WARNING "udc: " stuff)
#define INFO(stuff...) printk(KERN_INFO "udc: " stuff)
#endif

View File

@ -478,10 +478,9 @@ dummy_alloc_request (struct usb_ep *_ep, gfp_t mem_flags)
return NULL;
ep = usb_ep_to_dummy_ep (_ep);
req = kmalloc (sizeof *req, mem_flags);
req = kzalloc(sizeof(*req), mem_flags);
if (!req)
return NULL;
memset (req, 0, sizeof *req);
INIT_LIST_HEAD (&req->queue);
return &req->req;
}

View File

@ -182,33 +182,37 @@ struct eth_dev {
* parameters are in UTF-8 (superset of ASCII's 7 bit characters).
*/
static ushort __initdata idVendor;
static ushort idVendor;
module_param(idVendor, ushort, S_IRUGO);
MODULE_PARM_DESC(idVendor, "USB Vendor ID");
static ushort __initdata idProduct;
static ushort idProduct;
module_param(idProduct, ushort, S_IRUGO);
MODULE_PARM_DESC(idProduct, "USB Product ID");
static ushort __initdata bcdDevice;
static ushort bcdDevice;
module_param(bcdDevice, ushort, S_IRUGO);
MODULE_PARM_DESC(bcdDevice, "USB Device version (BCD)");
static char *__initdata iManufacturer;
static char *iManufacturer;
module_param(iManufacturer, charp, S_IRUGO);
MODULE_PARM_DESC(iManufacturer, "USB Manufacturer string");
static char *__initdata iProduct;
static char *iProduct;
module_param(iProduct, charp, S_IRUGO);
MODULE_PARM_DESC(iProduct, "USB Product string");
static char *iSerialNumber;
module_param(iSerialNumber, charp, S_IRUGO);
MODULE_PARM_DESC(iSerialNumber, "SerialNumber");
/* initial value, changed by "ifconfig usb0 hw ether xx:xx:xx:xx:xx:xx" */
static char *__initdata dev_addr;
static char *dev_addr;
module_param(dev_addr, charp, S_IRUGO);
MODULE_PARM_DESC(dev_addr, "Device Ethernet Address");
/* this address is invisible to ifconfig */
static char *__initdata host_addr;
static char *host_addr;
module_param(host_addr, charp, S_IRUGO);
MODULE_PARM_DESC(host_addr, "Host Ethernet Address");
@ -253,6 +257,14 @@ MODULE_PARM_DESC(host_addr, "Host Ethernet Address");
#define DEV_CONFIG_CDC
#endif
#ifdef CONFIG_USB_GADGET_MUSBHSFC
#define DEV_CONFIG_CDC
#endif
#ifdef CONFIG_USB_GADGET_MUSBHDRC
#define DEV_CONFIG_CDC
#endif
/* For CDC-incapable hardware, choose the simple cdc subset.
* Anything that talks bulk (without notable bugs) can do this.
@ -395,6 +407,7 @@ static inline int BITRATE(struct usb_gadget *g)
#define STRING_CDC 7
#define STRING_SUBSET 8
#define STRING_RNDIS 9
#define STRING_SERIALNUMBER 10
/* holds our biggest descriptor (or RNDIS response) */
#define USB_BUFSIZ 256
@ -862,6 +875,7 @@ static inline void __init hs_subset_descriptors(void)
static char manufacturer [50];
static char product_desc [40] = DRIVER_DESC;
static char serial_number [20];
#ifdef DEV_CONFIG_CDC
/* address that the host will use ... usually assigned at random */
@ -872,6 +886,7 @@ static char ethaddr [2 * ETH_ALEN + 1];
static struct usb_string strings [] = {
{ STRING_MANUFACTURER, manufacturer, },
{ STRING_PRODUCT, product_desc, },
{ STRING_SERIALNUMBER, serial_number, },
{ STRING_DATA, "Ethernet Data", },
#ifdef DEV_CONFIG_CDC
{ STRING_CDC, "CDC Ethernet", },
@ -1549,7 +1564,8 @@ static int eth_change_mtu (struct net_device *net, int new_mtu)
{
struct eth_dev *dev = netdev_priv(net);
// FIXME if rndis, don't change while link's live
if (dev->rndis)
return -EBUSY;
if (new_mtu <= ETH_HLEN || new_mtu > ETH_FRAME_LEN)
return -ERANGE;
@ -2116,7 +2132,7 @@ eth_req_free (struct usb_ep *ep, struct usb_request *req)
}
static void
static void __exit
eth_unbind (struct usb_gadget *gadget)
{
struct eth_dev *dev = get_gadget_data (gadget);
@ -2153,7 +2169,7 @@ static u8 __init nibble (unsigned char c)
return 0;
}
static void __init get_ether_addr (const char *str, u8 *dev_addr)
static int __init get_ether_addr(const char *str, u8 *dev_addr)
{
if (str) {
unsigned i;
@ -2168,9 +2184,10 @@ static void __init get_ether_addr (const char *str, u8 *dev_addr)
dev_addr [i] = num;
}
if (is_valid_ether_addr (dev_addr))
return;
return 0;
}
random_ether_addr(dev_addr);
return 1;
}
static int __init
@ -2268,6 +2285,10 @@ eth_bind (struct usb_gadget *gadget)
strlcpy (manufacturer, iManufacturer, sizeof manufacturer);
if (iProduct)
strlcpy (product_desc, iProduct, sizeof product_desc);
if (iSerialNumber) {
device_desc.iSerialNumber = STRING_SERIALNUMBER,
strlcpy(serial_number, iSerialNumber, sizeof serial_number);
}
/* all we really need is bulk IN/OUT */
usb_ep_autoconfig_reset (gadget);
@ -2377,9 +2398,13 @@ autoconf_fail:
* The host side address is used with CDC and RNDIS, and commonly
* ends up in a persistent config database.
*/
get_ether_addr(dev_addr, net->dev_addr);
if (get_ether_addr(dev_addr, net->dev_addr))
dev_warn(&gadget->dev,
"using random %s ethernet address\n", "self");
if (cdc || rndis) {
get_ether_addr(host_addr, dev->host_mac);
if (get_ether_addr(host_addr, dev->host_mac))
dev_warn(&gadget->dev,
"using random %s ethernet address\n", "host");
#ifdef DEV_CONFIG_CDC
snprintf (ethaddr, sizeof ethaddr, "%02X%02X%02X%02X%02X%02X",
dev->host_mac [0], dev->host_mac [1],
@ -2523,7 +2548,7 @@ static struct usb_gadget_driver eth_driver = {
.function = (char *) driver_desc,
.bind = eth_bind,
.unbind = eth_unbind,
.unbind = __exit_p(eth_unbind),
.setup = eth_setup,
.disconnect = eth_disconnect,

View File

@ -3678,7 +3678,7 @@ static void lun_release(struct device *dev)
kref_put(&fsg->ref, fsg_release);
}
static void fsg_unbind(struct usb_gadget *gadget)
static void __exit fsg_unbind(struct usb_gadget *gadget)
{
struct fsg_dev *fsg = get_gadget_data(gadget);
int i;
@ -4064,7 +4064,7 @@ static struct usb_gadget_driver fsg_driver = {
#endif
.function = (char *) longname,
.bind = fsg_bind,
.unbind = fsg_unbind,
.unbind = __exit_p(fsg_unbind),
.disconnect = fsg_disconnect,
.setup = fsg_setup,
.suspend = fsg_suspend,

View File

@ -3,9 +3,9 @@
* gadget drivers or other code that needs to deal with them, and which
* autoconfigures instead of using early binding to the hardware.
*
* This could eventually work like the ARM mach_is_*() stuff, driven by
* This SHOULD eventually work like the ARM mach_is_*() stuff, driven by
* some config file that gets updated as new hardware is supported.
* (And avoiding the runtime comparisons in typical one-choice cases.)
* (And avoiding all runtime comparisons in typical one-choice configs!)
*
* NOTE: some of these controller drivers may not be available yet.
*/
@ -93,6 +93,26 @@
#define gadget_is_imx(g) 0
#endif
/* Mentor high speed function controller */
#ifdef CONFIG_USB_GADGET_MUSBHSFC
#define gadget_is_musbhsfc(g) !strcmp("musbhsfc_udc", (g)->name)
#else
#define gadget_is_musbhsfc(g) 0
#endif
/* Mentor high speed "dual role" controller, peripheral mode */
#ifdef CONFIG_USB_GADGET_MUSBHDRC
#define gadget_is_musbhdrc(g) !strcmp("musbhdrc_udc", (g)->name)
#else
#define gadget_is_musbhdrc(g) 0
#endif
#ifdef CONFIG_USB_GADGET_MPC8272
#define gadget_is_mpc8272(g) !strcmp("mpc8272_udc", (g)->name)
#else
#define gadget_is_mpc8272(g) 0
#endif
// CONFIG_USB_GADGET_SX2
// CONFIG_USB_GADGET_AU1X00
// ...
@ -143,5 +163,11 @@ static inline int usb_gadget_controller_number(struct usb_gadget *gadget)
return 0x13;
else if (gadget_is_imx(gadget))
return 0x14;
else if (gadget_is_musbhsfc(gadget))
return 0x15;
else if (gadget_is_musbhdrc(gadget))
return 0x16;
else if (gadget_is_mpc8272(gadget))
return 0x17;
return -ENOENT;
}

View File

@ -275,11 +275,10 @@ goku_alloc_request(struct usb_ep *_ep, gfp_t gfp_flags)
if (!_ep)
return NULL;
req = kmalloc(sizeof *req, gfp_flags);
req = kzalloc(sizeof *req, gfp_flags);
if (!req)
return NULL;
memset(req, 0, sizeof *req);
req->req.dma = DMA_ADDR_INVALID;
INIT_LIST_HEAD(&req->queue);
return &req->req;

View File

@ -170,10 +170,9 @@ static struct dev_data *dev_new (void)
{
struct dev_data *dev;
dev = kmalloc (sizeof *dev, GFP_KERNEL);
dev = kzalloc(sizeof(*dev), GFP_KERNEL);
if (!dev)
return NULL;
memset (dev, 0, sizeof *dev);
dev->state = STATE_DEV_DISABLED;
atomic_set (&dev->count, 1);
spin_lock_init (&dev->lock);
@ -1592,10 +1591,9 @@ static int activate_ep_files (struct dev_data *dev)
gadget_for_each_ep (ep, dev->gadget) {
struct ep_data *data;
data = kmalloc (sizeof *data, GFP_KERNEL);
data = kzalloc(sizeof(*data), GFP_KERNEL);
if (!data)
goto enomem;
memset (data, 0, sizeof data);
data->state = STATE_EP_DISABLED;
init_MUTEX (&data->lock);
init_waitqueue_head (&data->wait);

View File

@ -1114,11 +1114,10 @@ static struct usb_request *lh7a40x_alloc_request(struct usb_ep *ep,
DEBUG("%s, %p\n", __FUNCTION__, ep);
req = kmalloc(sizeof *req, gfp_flags);
req = kzalloc(sizeof(*req), gfp_flags);
if (!req)
return 0;
memset(req, 0, sizeof *req);
INIT_LIST_HEAD(&req->queue);
return &req->req;

View File

@ -386,11 +386,10 @@ net2280_alloc_request (struct usb_ep *_ep, gfp_t gfp_flags)
return NULL;
ep = container_of (_ep, struct net2280_ep, ep);
req = kmalloc (sizeof *req, gfp_flags);
req = kzalloc(sizeof(*req), gfp_flags);
if (!req)
return NULL;
memset (req, 0, sizeof *req);
req->req.dma = DMA_ADDR_INVALID;
INIT_LIST_HEAD (&req->queue);

View File

@ -273,9 +273,8 @@ omap_alloc_request(struct usb_ep *ep, gfp_t gfp_flags)
{
struct omap_req *req;
req = kmalloc(sizeof *req, gfp_flags);
req = kzalloc(sizeof(*req), gfp_flags);
if (req) {
memset (req, 0, sizeof *req);
req->req.dma = DMA_ADDR_INVALID;
INIT_LIST_HEAD (&req->queue);
}
@ -2586,11 +2585,10 @@ omap_udc_setup(struct platform_device *odev, struct otg_transceiver *xceiv)
/* UDC_PULLUP_EN gates the chip clock */
// OTG_SYSCON_1_REG |= DEV_IDLE_EN;
udc = kmalloc (sizeof *udc, SLAB_KERNEL);
udc = kzalloc(sizeof(*udc), SLAB_KERNEL);
if (!udc)
return -ENOMEM;
memset(udc, 0, sizeof *udc);
spin_lock_init (&udc->lock);
udc->gadget.ops = &omap_gadget_ops;

View File

@ -335,11 +335,10 @@ pxa2xx_ep_alloc_request (struct usb_ep *_ep, gfp_t gfp_flags)
{
struct pxa2xx_request *req;
req = kmalloc (sizeof *req, gfp_flags);
req = kzalloc(sizeof(*req), gfp_flags);
if (!req)
return NULL;
memset (req, 0, sizeof *req);
INIT_LIST_HEAD (&req->queue);
return &req->req;
}

View File

@ -369,7 +369,7 @@ static struct usb_gadget_driver gs_gadget_driver = {
#endif /* CONFIG_USB_GADGET_DUALSPEED */
.function = GS_LONG_NAME,
.bind = gs_bind,
.unbind = gs_unbind,
.unbind = __exit_p(gs_unbind),
.setup = gs_setup,
.disconnect = gs_disconnect,
.driver = {
@ -1413,7 +1413,7 @@ requeue:
* Called on module load. Allocates and initializes the device
* structure and a control request.
*/
static int gs_bind(struct usb_gadget *gadget)
static int __init gs_bind(struct usb_gadget *gadget)
{
int ret;
struct usb_ep *ep;
@ -1538,7 +1538,7 @@ autoconf_fail:
* Called on module unload. Frees the control request and device
* structure.
*/
static void gs_unbind(struct usb_gadget *gadget)
static void __exit gs_unbind(struct usb_gadget *gadget)
{
struct gs_dev *dev = get_gadget_data(gadget);
@ -2178,10 +2178,9 @@ static int gs_alloc_ports(struct gs_dev *dev, gfp_t kmalloc_flags)
return -EIO;
for (i=0; i<GS_NUM_PORTS; i++) {
if ((port=(struct gs_port *)kmalloc(sizeof(struct gs_port), kmalloc_flags)) == NULL)
if ((port=kzalloc(sizeof(struct gs_port), kmalloc_flags)) == NULL)
return -ENOMEM;
memset(port, 0, sizeof(struct gs_port));
port->port_dev = dev;
port->port_num = i;
port->port_line_coding.dwDTERate = cpu_to_le32(GS_DEFAULT_DTE_RATE);

View File

@ -1119,7 +1119,7 @@ zero_autoresume (unsigned long _dev)
/*-------------------------------------------------------------------------*/
static void
static void __exit
zero_unbind (struct usb_gadget *gadget)
{
struct zero_dev *dev = get_gadget_data (gadget);
@ -1136,7 +1136,7 @@ zero_unbind (struct usb_gadget *gadget)
set_gadget_data (gadget, NULL);
}
static int
static int __init
zero_bind (struct usb_gadget *gadget)
{
struct zero_dev *dev;
@ -1188,10 +1188,9 @@ autoconf_fail:
/* ok, we made sense of the hardware ... */
dev = kmalloc (sizeof *dev, SLAB_KERNEL);
dev = kzalloc(sizeof(*dev), SLAB_KERNEL);
if (!dev)
return -ENOMEM;
memset (dev, 0, sizeof *dev);
spin_lock_init (&dev->lock);
dev->gadget = gadget;
set_gadget_data (gadget, dev);
@ -1224,12 +1223,6 @@ autoconf_fail:
loopback_config.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
}
if (gadget->is_otg) {
otg_descriptor.bmAttributes |= USB_OTG_HNP,
source_sink_config.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
loopback_config.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
}
usb_gadget_set_selfpowered (gadget);
init_timer (&dev->resume);
@ -1294,7 +1287,7 @@ static struct usb_gadget_driver zero_driver = {
#endif
.function = (char *) longname,
.bind = zero_bind,
.unbind = zero_unbind,
.unbind = __exit_p(zero_unbind),
.setup = zero_setup,
.disconnect = zero_disconnect,

View File

@ -6,7 +6,7 @@ comment "USB Host Controller Drivers"
config USB_EHCI_HCD
tristate "EHCI HCD (USB 2.0) support"
depends on USB && PCI
depends on USB && USB_ARCH_HAS_EHCI
---help---
The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0
"high speed" (480 Mbit/sec, 60 Mbyte/sec) host controller hardware.

View File

@ -0,0 +1,297 @@
/*
* EHCI HCD (Host Controller Driver) for USB.
*
* (C) Copyright 2000-2004 David Brownell <dbrownell@users.sourceforge.net>
*
* Bus Glue for AMD Alchemy Au1xxx
*
* Based on "ohci-au1xxx.c" by Matt Porter <mporter@kernel.crashing.org>
*
* Modified for AMD Alchemy Au1200 EHC
* by K.Boge <karsten.boge@amd.com>
*
* This file is licenced under the GPL.
*/
#include <linux/platform_device.h>
#include <asm/mach-au1x00/au1000.h>
#ifndef CONFIG_SOC_AU1200
#error "this Alchemy chip doesn't have EHCI"
#else /* Au1200 */
#define USB_HOST_CONFIG (USB_MSR_BASE + USB_MSR_MCFG)
#define USB_MCFG_PFEN (1<<31)
#define USB_MCFG_RDCOMB (1<<30)
#define USB_MCFG_SSDEN (1<<23)
#define USB_MCFG_PHYPLLEN (1<<19)
#define USB_MCFG_EHCCLKEN (1<<17)
#define USB_MCFG_UCAM (1<<7)
#define USB_MCFG_EBMEN (1<<3)
#define USB_MCFG_EMEMEN (1<<2)
#define USBH_ENABLE_CE (USB_MCFG_PHYPLLEN | USB_MCFG_EHCCLKEN)
#ifdef CONFIG_DMA_COHERENT
#define USBH_ENABLE_INIT (USBH_ENABLE_CE \
| USB_MCFG_PFEN | USB_MCFG_RDCOMB \
| USB_MCFG_SSDEN | USB_MCFG_UCAM \
| USB_MCFG_EBMEN | USB_MCFG_EMEMEN)
#else
#define USBH_ENABLE_INIT (USBH_ENABLE_CE \
| USB_MCFG_PFEN | USB_MCFG_RDCOMB \
| USB_MCFG_SSDEN \
| USB_MCFG_EBMEN | USB_MCFG_EMEMEN)
#endif
#define USBH_DISABLE (USB_MCFG_EBMEN | USB_MCFG_EMEMEN)
#endif /* Au1200 */
extern int usb_disabled(void);
/*-------------------------------------------------------------------------*/
static void au1xxx_start_ehc(struct platform_device *dev)
{
pr_debug(__FILE__ ": starting Au1xxx EHCI USB Controller\n");
/* write HW defaults again in case Yamon cleared them */
if (au_readl(USB_HOST_CONFIG) == 0) {
au_writel(0x00d02000, USB_HOST_CONFIG);
au_readl(USB_HOST_CONFIG);
udelay(1000);
}
/* enable host controller */
au_writel(USBH_ENABLE_CE | au_readl(USB_HOST_CONFIG), USB_HOST_CONFIG);
au_readl(USB_HOST_CONFIG);
udelay(1000);
au_writel(USBH_ENABLE_INIT | au_readl(USB_HOST_CONFIG),
USB_HOST_CONFIG);
au_readl(USB_HOST_CONFIG);
udelay(1000);
pr_debug(__FILE__ ": Clock to USB host has been enabled\n");
}
static void au1xxx_stop_ehc(struct platform_device *dev)
{
pr_debug(__FILE__ ": stopping Au1xxx EHCI USB Controller\n");
/* Disable mem */
au_writel(~USBH_DISABLE & au_readl(USB_HOST_CONFIG), USB_HOST_CONFIG);
udelay(1000);
/* Disable clock */
au_writel(~USB_MCFG_EHCCLKEN & au_readl(USB_HOST_CONFIG),
USB_HOST_CONFIG);
au_readl(USB_HOST_CONFIG);
}
/*-------------------------------------------------------------------------*/
/* configure so an HC device and id are always provided */
/* always called with process context; sleeping is OK */
/**
* usb_ehci_au1xxx_probe - initialize Au1xxx-based HCDs
* Context: !in_interrupt()
*
* Allocates basic resources for this USB host controller, and
* then invokes the start() method for the HCD associated with it
* through the hotplug entry's driver_data.
*
*/
int usb_ehci_au1xxx_probe(const struct hc_driver *driver,
struct usb_hcd **hcd_out, struct platform_device *dev)
{
int retval;
struct usb_hcd *hcd;
struct ehci_hcd *ehci;
#if defined(CONFIG_SOC_AU1200) && defined(CONFIG_DMA_COHERENT)
/* Au1200 AB USB does not support coherent memory */
if (!(read_c0_prid() & 0xff)) {
pr_info("%s: this is chip revision AB!\n", dev->dev.name);
pr_info("%s: update your board or re-configure the kernel\n",
dev->dev.name);
return -ENODEV;
}
#endif
au1xxx_start_ehc(dev);
if (dev->resource[1].flags != IORESOURCE_IRQ) {
pr_debug("resource[1] is not IORESOURCE_IRQ");
retval = -ENOMEM;
}
hcd = usb_create_hcd(driver, &dev->dev, "Au1xxx");
if (!hcd)
return -ENOMEM;
hcd->rsrc_start = dev->resource[0].start;
hcd->rsrc_len = dev->resource[0].end - dev->resource[0].start + 1;
if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
pr_debug("request_mem_region failed");
retval = -EBUSY;
goto err1;
}
hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
if (!hcd->regs) {
pr_debug("ioremap failed");
retval = -ENOMEM;
goto err2;
}
ehci = hcd_to_ehci(hcd);
ehci->caps = hcd->regs;
ehci->regs = hcd->regs + HC_LENGTH(readl(&ehci->caps->hc_capbase));
/* cache this readonly data; minimize chip reads */
ehci->hcs_params = readl(&ehci->caps->hcs_params);
/* ehci_hcd_init(hcd_to_ehci(hcd)); */
retval =
usb_add_hcd(hcd, dev->resource[1].start, SA_INTERRUPT | SA_SHIRQ);
if (retval == 0)
return retval;
au1xxx_stop_ehc(dev);
iounmap(hcd->regs);
err2:
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
err1:
usb_put_hcd(hcd);
return retval;
}
/* may be called without controller electrically present */
/* may be called with controller, bus, and devices active */
/**
* usb_ehci_hcd_au1xxx_remove - shutdown processing for Au1xxx-based HCDs
* @dev: USB Host Controller being removed
* Context: !in_interrupt()
*
* Reverses the effect of usb_ehci_hcd_au1xxx_probe(), first invoking
* the HCD's stop() method. It is always called from a thread
* context, normally "rmmod", "apmd", or something similar.
*
*/
void usb_ehci_au1xxx_remove(struct usb_hcd *hcd, struct platform_device *dev)
{
usb_remove_hcd(hcd);
iounmap(hcd->regs);
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
usb_put_hcd(hcd);
au1xxx_stop_ehc(dev);
}
/*-------------------------------------------------------------------------*/
static const struct hc_driver ehci_au1xxx_hc_driver = {
.description = hcd_name,
.product_desc = "Au1xxx EHCI",
.hcd_priv_size = sizeof(struct ehci_hcd),
/*
* generic hardware linkage
*/
.irq = ehci_irq,
.flags = HCD_MEMORY | HCD_USB2,
/*
* basic lifecycle operations
*/
.reset = ehci_init,
.start = ehci_run,
.stop = ehci_stop,
/*
* managing i/o requests and associated device resources
*/
.urb_enqueue = ehci_urb_enqueue,
.urb_dequeue = ehci_urb_dequeue,
.endpoint_disable = ehci_endpoint_disable,
/*
* scheduling support
*/
.get_frame_number = ehci_get_frame,
/*
* root hub support
*/
.hub_status_data = ehci_hub_status_data,
.hub_control = ehci_hub_control,
#ifdef CONFIG_PM
.hub_suspend = ehci_hub_suspend,
.hub_resume = ehci_hub_resume,
#endif
};
/*-------------------------------------------------------------------------*/
static int ehci_hcd_au1xxx_drv_probe(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct usb_hcd *hcd = NULL;
int ret;
pr_debug("In ehci_hcd_au1xxx_drv_probe\n");
if (usb_disabled())
return -ENODEV;
ret = usb_ehci_au1xxx_probe(&ehci_au1xxx_hc_driver, &hcd, pdev);
return ret;
}
static int ehci_hcd_au1xxx_drv_remove(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct usb_hcd *hcd = dev_get_drvdata(dev);
usb_ehci_au1xxx_remove(hcd, pdev);
return 0;
}
/*TBD*/
/*static int ehci_hcd_au1xxx_drv_suspend(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct usb_hcd *hcd = dev_get_drvdata(dev);
return 0;
}
static int ehci_hcd_au1xxx_drv_resume(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct usb_hcd *hcd = dev_get_drvdata(dev);
return 0;
}
*/
static struct device_driver ehci_hcd_au1xxx_driver = {
.name = "au1xxx-ehci",
.bus = &platform_bus_type,
.probe = ehci_hcd_au1xxx_drv_probe,
.remove = ehci_hcd_au1xxx_drv_remove,
/*.suspend = ehci_hcd_au1xxx_drv_suspend, */
/*.resume = ehci_hcd_au1xxx_drv_resume, */
};
static int __init ehci_hcd_au1xxx_init(void)
{
pr_debug(DRIVER_INFO " (Au1xxx)\n");
return driver_register(&ehci_hcd_au1xxx_driver);
}
static void __exit ehci_hcd_au1xxx_cleanup(void)
{
driver_unregister(&ehci_hcd_au1xxx_driver);
}
module_init(ehci_hcd_au1xxx_init);
module_exit(ehci_hcd_au1xxx_cleanup);

366
drivers/usb/host/ehci-fsl.c Normal file
View File

@ -0,0 +1,366 @@
/*
* (C) Copyright David Brownell 2000-2002
* Copyright (c) 2005 MontaVista Software
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software Foundation,
* Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Ported to 834x by Randy Vinson <rvinson@mvista.com> using code provided
* by Hunter Wu.
*/
#include <linux/platform_device.h>
#include <linux/fsl_devices.h>
#include "ehci-fsl.h"
/* FIXME: Power Managment is un-ported so temporarily disable it */
#undef CONFIG_PM
/* PCI-based HCs are common, but plenty of non-PCI HCs are used too */
/* configure so an HC device and id are always provided */
/* always called with process context; sleeping is OK */
/**
* usb_hcd_fsl_probe - initialize FSL-based HCDs
* @drvier: Driver to be used for this HCD
* @pdev: USB Host Controller being probed
* Context: !in_interrupt()
*
* Allocates basic resources for this USB host controller.
*
*/
int usb_hcd_fsl_probe(const struct hc_driver *driver,
struct platform_device *pdev)
{
struct fsl_usb2_platform_data *pdata;
struct usb_hcd *hcd;
struct resource *res;
int irq;
int retval;
unsigned int temp;
pr_debug("initializing FSL-SOC USB Controller\n");
/* Need platform data for setup */
pdata = (struct fsl_usb2_platform_data *)pdev->dev.platform_data;
if (!pdata) {
dev_err(&pdev->dev,
"No platform data for %s.\n", pdev->dev.bus_id);
return -ENODEV;
}
/*
* This is a host mode driver, verify that we're supposed to be
* in host mode.
*/
if (!((pdata->operating_mode == FSL_USB2_DR_HOST) ||
(pdata->operating_mode == FSL_USB2_MPH_HOST))) {
dev_err(&pdev->dev,
"Non Host Mode configured for %s. Wrong driver linked.\n",
pdev->dev.bus_id);
return -ENODEV;
}
res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
if (!res) {
dev_err(&pdev->dev,
"Found HC with no IRQ. Check %s setup!\n",
pdev->dev.bus_id);
return -ENODEV;
}
irq = res->start;
hcd = usb_create_hcd(driver, &pdev->dev, pdev->dev.bus_id);
if (!hcd) {
retval = -ENOMEM;
goto err1;
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
dev_err(&pdev->dev,
"Found HC with no register addr. Check %s setup!\n",
pdev->dev.bus_id);
retval = -ENODEV;
goto err2;
}
hcd->rsrc_start = res->start;
hcd->rsrc_len = res->end - res->start + 1;
if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,
driver->description)) {
dev_dbg(&pdev->dev, "controller already in use\n");
retval = -EBUSY;
goto err2;
}
hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
if (hcd->regs == NULL) {
dev_dbg(&pdev->dev, "error mapping memory\n");
retval = -EFAULT;
goto err3;
}
/* Enable USB controller */
temp = in_be32(hcd->regs + 0x500);
out_be32(hcd->regs + 0x500, temp | 0x4);
/* Set to Host mode */
temp = in_le32(hcd->regs + 0x1a8);
out_le32(hcd->regs + 0x1a8, temp | 0x3);
retval = usb_add_hcd(hcd, irq, SA_SHIRQ);
if (retval != 0)
goto err4;
return retval;
err4:
iounmap(hcd->regs);
err3:
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
err2:
usb_put_hcd(hcd);
err1:
dev_err(&pdev->dev, "init %s fail, %d\n", pdev->dev.bus_id, retval);
return retval;
}
/* may be called without controller electrically present */
/* may be called with controller, bus, and devices active */
/**
* usb_hcd_fsl_remove - shutdown processing for FSL-based HCDs
* @dev: USB Host Controller being removed
* Context: !in_interrupt()
*
* Reverses the effect of usb_hcd_fsl_probe().
*
*/
void usb_hcd_fsl_remove(struct usb_hcd *hcd, struct platform_device *pdev)
{
usb_remove_hcd(hcd);
iounmap(hcd->regs);
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
usb_put_hcd(hcd);
}
static void mpc83xx_setup_phy(struct ehci_hcd *ehci,
enum fsl_usb2_phy_modes phy_mode,
unsigned int port_offset)
{
u32 portsc = 0;
switch (phy_mode) {
case FSL_USB2_PHY_ULPI:
portsc |= PORT_PTS_ULPI;
break;
case FSL_USB2_PHY_SERIAL:
portsc |= PORT_PTS_SERIAL;
break;
case FSL_USB2_PHY_UTMI_WIDE:
portsc |= PORT_PTS_PTW;
/* fall through */
case FSL_USB2_PHY_UTMI:
portsc |= PORT_PTS_UTMI;
break;
case FSL_USB2_PHY_NONE:
break;
}
writel(portsc, &ehci->regs->port_status[port_offset]);
}
static void mpc83xx_usb_setup(struct usb_hcd *hcd)
{
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
struct fsl_usb2_platform_data *pdata;
void __iomem *non_ehci = hcd->regs;
pdata =
(struct fsl_usb2_platform_data *)hcd->self.controller->
platform_data;
/* Enable PHY interface in the control reg. */
out_be32(non_ehci + FSL_SOC_USB_CTRL, 0x00000004);
out_be32(non_ehci + FSL_SOC_USB_SNOOP1, 0x0000001b);
if (pdata->operating_mode == FSL_USB2_DR_HOST)
mpc83xx_setup_phy(ehci, pdata->phy_mode, 0);
if (pdata->operating_mode == FSL_USB2_MPH_HOST) {
unsigned int chip, rev, svr;
svr = mfspr(SPRN_SVR);
chip = svr >> 16;
rev = (svr >> 4) & 0xf;
/* Deal with USB Erratum #14 on MPC834x Rev 1.0 & 1.1 chips */
if ((rev == 1) && (chip >= 0x8050) && (chip <= 0x8055))
ehci->has_fsl_port_bug = 1;
if (pdata->port_enables & FSL_USB2_PORT0_ENABLED)
mpc83xx_setup_phy(ehci, pdata->phy_mode, 0);
if (pdata->port_enables & FSL_USB2_PORT1_ENABLED)
mpc83xx_setup_phy(ehci, pdata->phy_mode, 1);
}
/* put controller in host mode. */
writel(0x00000003, non_ehci + FSL_SOC_USB_USBMODE);
out_be32(non_ehci + FSL_SOC_USB_PRICTRL, 0x0000000c);
out_be32(non_ehci + FSL_SOC_USB_AGECNTTHRSH, 0x00000040);
out_be32(non_ehci + FSL_SOC_USB_SICTRL, 0x00000001);
}
/* called after powerup, by probe or system-pm "wakeup" */
static int ehci_fsl_reinit(struct ehci_hcd *ehci)
{
mpc83xx_usb_setup(ehci_to_hcd(ehci));
ehci_port_power(ehci, 0);
return 0;
}
/* called during probe() after chip reset completes */
static int ehci_fsl_setup(struct usb_hcd *hcd)
{
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
int retval;
/* EHCI registers start at offset 0x100 */
ehci->caps = hcd->regs + 0x100;
ehci->regs = hcd->regs + 0x100 +
HC_LENGTH(readl(&ehci->caps->hc_capbase));
dbg_hcs_params(ehci, "reset");
dbg_hcc_params(ehci, "reset");
/* cache this readonly data; minimize chip reads */
ehci->hcs_params = readl(&ehci->caps->hcs_params);
retval = ehci_halt(ehci);
if (retval)
return retval;
/* data structure init */
retval = ehci_init(hcd);
if (retval)
return retval;
ehci->is_tdi_rh_tt = 1;
ehci->sbrn = 0x20;
ehci_reset(ehci);
retval = ehci_fsl_reinit(ehci);
return retval;
}
static const struct hc_driver ehci_fsl_hc_driver = {
.description = hcd_name,
.product_desc = "Freescale On-Chip EHCI Host Controller",
.hcd_priv_size = sizeof(struct ehci_hcd),
/*
* generic hardware linkage
*/
.irq = ehci_irq,
.flags = HCD_USB2,
/*
* basic lifecycle operations
*/
.reset = ehci_fsl_setup,
.start = ehci_run,
#ifdef CONFIG_PM
.suspend = ehci_bus_suspend,
.resume = ehci_bus_resume,
#endif
.stop = ehci_stop,
/*
* managing i/o requests and associated device resources
*/
.urb_enqueue = ehci_urb_enqueue,
.urb_dequeue = ehci_urb_dequeue,
.endpoint_disable = ehci_endpoint_disable,
/*
* scheduling support
*/
.get_frame_number = ehci_get_frame,
/*
* root hub support
*/
.hub_status_data = ehci_hub_status_data,
.hub_control = ehci_hub_control,
.bus_suspend = ehci_bus_suspend,
.bus_resume = ehci_bus_resume,
};
static int ehci_fsl_drv_probe(struct platform_device *pdev)
{
if (usb_disabled())
return -ENODEV;
return usb_hcd_fsl_probe(&ehci_fsl_hc_driver, pdev);
}
static int ehci_fsl_drv_remove(struct platform_device *pdev)
{
struct usb_hcd *hcd = platform_get_drvdata(pdev);
usb_hcd_fsl_remove(hcd, pdev);
return 0;
}
static struct platform_driver ehci_fsl_dr_driver = {
.probe = ehci_fsl_drv_probe,
.remove = ehci_fsl_drv_remove,
.driver = {
.name = "fsl-usb2-dr",
},
};
static struct platform_driver ehci_fsl_mph_driver = {
.probe = ehci_fsl_drv_probe,
.remove = ehci_fsl_drv_remove,
.driver = {
.name = "fsl-usb2-mph",
},
};
static int __init ehci_fsl_init(void)
{
int retval;
pr_debug("%s: block sizes: qh %Zd qtd %Zd itd %Zd sitd %Zd\n",
hcd_name,
sizeof(struct ehci_qh), sizeof(struct ehci_qtd),
sizeof(struct ehci_itd), sizeof(struct ehci_sitd));
retval = platform_driver_register(&ehci_fsl_dr_driver);
if (retval)
return retval;
return platform_driver_register(&ehci_fsl_mph_driver);
}
static void __exit ehci_fsl_cleanup(void)
{
platform_driver_unregister(&ehci_fsl_mph_driver);
platform_driver_unregister(&ehci_fsl_dr_driver);
}
module_init(ehci_fsl_init);
module_exit(ehci_fsl_cleanup);

View File

@ -0,0 +1,37 @@
/* Copyright (c) 2005 freescale semiconductor
* Copyright (c) 2005 MontaVista Software
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#ifndef _EHCI_FSL_H
#define _EHCI_FSL_H
/* offsets for the non-ehci registers in the FSL SOC USB controller */
#define FSL_SOC_USB_ULPIVP 0x170
#define FSL_SOC_USB_PORTSC1 0x184
#define PORT_PTS_MSK (3<<30)
#define PORT_PTS_UTMI (0<<30)
#define PORT_PTS_ULPI (2<<30)
#define PORT_PTS_SERIAL (3<<30)
#define PORT_PTS_PTW (1<<28)
#define FSL_SOC_USB_PORTSC2 0x188
#define FSL_SOC_USB_USBMODE 0x1a8
#define FSL_SOC_USB_SNOOP1 0x400 /* NOTE: big-endian */
#define FSL_SOC_USB_SNOOP2 0x404 /* NOTE: big-endian */
#define FSL_SOC_USB_AGECNTTHRSH 0x408 /* NOTE: big-endian */
#define FSL_SOC_USB_SICTRL 0x40c /* NOTE: big-endian */
#define FSL_SOC_USB_PRICTRL 0x410 /* NOTE: big-endian */
#define FSL_SOC_USB_CTRL 0x500 /* NOTE: big-endian */
#endif /* _EHCI_FSL_H */

View File

@ -889,8 +889,19 @@ MODULE_LICENSE ("GPL");
#ifdef CONFIG_PCI
#include "ehci-pci.c"
#define EHCI_BUS_GLUED
#endif
#if !defined(CONFIG_PCI)
#ifdef CONFIG_PPC_83xx
#include "ehci-fsl.c"
#define EHCI_BUS_GLUED
#endif
#ifdef CONFIG_SOC_AU1X00
#include "ehci-au1xxx.c"
#define EHCI_BUS_GLUED
#endif
#ifndef EHCI_BUS_GLUED
#error "missing bus glue for ehci-hcd"
#endif

View File

@ -359,6 +359,8 @@ static int ehci_hub_control (
case USB_PORT_FEAT_SUSPEND:
if (temp & PORT_RESET)
goto error;
if (ehci->no_selective_suspend)
break;
if (temp & PORT_SUSPEND) {
if ((temp & PORT_PE) == 0)
goto error;
@ -514,6 +516,8 @@ static int ehci_hub_control (
temp &= ~PORT_RWC_BITS;
switch (wValue) {
case USB_PORT_FEAT_SUSPEND:
if (ehci->no_selective_suspend)
break;
if ((temp & PORT_PE) == 0
|| (temp & PORT_RESET) != 0)
goto error;

View File

@ -75,7 +75,6 @@ static void qh_destroy (struct kref *kref)
}
if (qh->dummy)
ehci_qtd_free (ehci, qh->dummy);
usb_put_dev (qh->dev);
dma_pool_free (ehci->qh_pool, qh, qh->qh_dma);
}
@ -221,13 +220,9 @@ static int ehci_mem_init (struct ehci_hcd *ehci, gfp_t flags)
ehci->periodic [i] = EHCI_LIST_END;
/* software shadow of hardware table */
ehci->pshadow = kmalloc (ehci->periodic_size * sizeof (void *), flags);
if (ehci->pshadow == NULL) {
goto fail;
}
memset (ehci->pshadow, 0, ehci->periodic_size * sizeof (void *));
return 0;
ehci->pshadow = kcalloc(ehci->periodic_size, sizeof(void *), flags);
if (ehci->pshadow != NULL)
return 0;
fail:
ehci_dbg (ehci, "couldn't init memory\n");

View File

@ -106,11 +106,11 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
}
break;
case PCI_VENDOR_ID_NVIDIA:
switch (pdev->device) {
/* NVidia reports that certain chips don't handle
* QH, ITD, or SITD addresses above 2GB. (But TD,
* data buffer, and periodic schedule are normal.)
*/
switch (pdev->device) {
case 0x003c: /* MCP04 */
case 0x005b: /* CK804 */
case 0x00d8: /* CK8 */
@ -120,6 +120,14 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
ehci_warn(ehci, "can't enable NVidia "
"workaround for >2GB RAM\n");
break;
/* Some NForce2 chips have problems with selective suspend;
* fixed in newer silicon.
*/
case 0x0068:
pci_read_config_dword(pdev, PCI_REVISION_ID, &temp);
if ((temp & 0xff) < 0xa4)
ehci->no_selective_suspend = 1;
break;
}
break;
}
@ -163,6 +171,21 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
device_init_wakeup(&pdev->dev, 1);
}
#ifdef CONFIG_USB_SUSPEND
/* REVISIT: the controller works fine for wakeup iff the root hub
* itself is "globally" suspended, but usbcore currently doesn't
* understand such things.
*
* System suspend currently expects to be able to suspend the entire
* device tree, device-at-a-time. If we failed selective suspend
* reports, system suspend would fail; so the root hub code must claim
* success. That's lying to usbcore, and it matters for for runtime
* PM scenarios with selective suspend and remote wakeup...
*/
if (ehci->no_selective_suspend && device_can_wakeup(&pdev->dev))
ehci_warn(ehci, "selective suspend/wakeup unavailable\n");
#endif
retval = ehci_pci_reinit(ehci, pdev);
done:
return retval;

View File

@ -702,7 +702,7 @@ qh_make (
}
/* support for tt scheduling, and access to toggles */
qh->dev = usb_get_dev (urb->dev);
qh->dev = urb->dev;
/* using TT? */
switch (urb->dev->speed) {
@ -721,7 +721,14 @@ qh_make (
info1 |= maxp << 16;
info2 |= (EHCI_TUNE_MULT_TT << 30);
info2 |= urb->dev->ttport << 23;
/* Some Freescale processors have an erratum in which the
* port number in the queue head was 0..N-1 instead of 1..N.
*/
if (ehci_has_fsl_portno_bug(ehci))
info2 |= (urb->dev->ttport-1) << 23;
else
info2 |= urb->dev->ttport << 23;
/* set the address of the TT; for TDI's integrated
* root hub tt, leave it zeroed.
@ -1015,12 +1022,14 @@ static void start_unlink_async (struct ehci_hcd *ehci, struct ehci_qh *qh)
/* stop async schedule right now? */
if (unlikely (qh == ehci->async)) {
/* can't get here without STS_ASS set */
if (ehci_to_hcd(ehci)->state != HC_STATE_HALT) {
if (ehci_to_hcd(ehci)->state != HC_STATE_HALT
&& !ehci->reclaim) {
/* ... and CMD_IAAD clear */
writel (cmd & ~CMD_ASE, &ehci->regs->command);
wmb ();
// handshake later, if we need to
timer_action_done (ehci, TIMER_ASYNC_OFF);
}
timer_action_done (ehci, TIMER_ASYNC_OFF);
return;
}

View File

@ -707,6 +707,7 @@ iso_stream_init (
} else {
u32 addr;
int think_time;
int hs_transfers;
addr = dev->ttport << 24;
if (!ehci_is_TDI(ehci)
@ -719,6 +720,7 @@ iso_stream_init (
think_time = dev->tt ? dev->tt->think_time : 0;
stream->tt_usecs = NS_TO_US (think_time + usb_calc_bus_time (
dev->speed, is_input, 1, maxp));
hs_transfers = max (1u, (maxp + 187) / 188);
if (is_input) {
u32 tmp;
@ -727,12 +729,11 @@ iso_stream_init (
stream->usecs = HS_USECS_ISO (1);
stream->raw_mask = 1;
/* pessimistic c-mask */
tmp = usb_calc_bus_time (USB_SPEED_FULL, 1, 0, maxp)
/ (125 * 1000);
stream->raw_mask |= 3 << (tmp + 9);
/* c-mask as specified in USB 2.0 11.18.4 3.c */
tmp = (1 << (hs_transfers + 2)) - 1;
stream->raw_mask |= tmp << (8 + 2);
} else
stream->raw_mask = smask_out [maxp / 188];
stream->raw_mask = smask_out [hs_transfers - 1];
bandwidth = stream->usecs + stream->c_usecs;
bandwidth /= 1 << (interval + 2);
@ -863,9 +864,8 @@ iso_sched_alloc (unsigned packets, gfp_t mem_flags)
int size = sizeof *iso_sched;
size += packets * sizeof (struct ehci_iso_packet);
iso_sched = kmalloc (size, mem_flags);
iso_sched = kzalloc(size, mem_flags);
if (likely (iso_sched != NULL)) {
memset(iso_sched, 0, size);
INIT_LIST_HEAD (&iso_sched->td_list);
}
return iso_sched;
@ -1398,7 +1398,7 @@ itd_complete (
*/
/* give urb back to the driver ... can be out-of-order */
dev = usb_get_dev (urb->dev);
dev = urb->dev;
ehci_urb_done (ehci, urb, regs);
urb = NULL;
@ -1417,7 +1417,6 @@ itd_complete (
(stream->bEndpointAddress & USB_DIR_IN) ? "in" : "out");
}
iso_stream_put (ehci, stream);
usb_put_dev (dev);
return 1;
}
@ -1764,7 +1763,7 @@ sitd_complete (
*/
/* give urb back to the driver */
dev = usb_get_dev (urb->dev);
dev = urb->dev;
ehci_urb_done (ehci, urb, regs);
urb = NULL;
@ -1783,7 +1782,6 @@ sitd_complete (
(stream->bEndpointAddress & USB_DIR_IN) ? "in" : "out");
}
iso_stream_put (ehci, stream);
usb_put_dev (dev);
return 1;
}

View File

@ -88,7 +88,12 @@ struct ehci_hcd { /* one per controller */
unsigned long next_statechange;
u32 command;
/* SILICON QUIRKS */
unsigned is_tdi_rh_tt:1; /* TDI roothub with TT */
unsigned no_selective_suspend:1;
unsigned has_fsl_port_bug:1; /* FreeScale */
u8 sbrn; /* packed release number */
/* irq statistics */
#ifdef EHCI_STATS
@ -97,7 +102,6 @@ struct ehci_hcd { /* one per controller */
#else
# define COUNT(x) do {} while (0)
#endif
u8 sbrn; /* packed release number */
};
/* convert between an HCD pointer and the corresponding EHCI_HCD */
@ -636,6 +640,18 @@ ehci_port_speed(struct ehci_hcd *ehci, unsigned int portsc)
#define ehci_port_speed(ehci, portsc) (1<<USB_PORT_FEAT_HIGHSPEED)
#endif
/*-------------------------------------------------------------------------*/
#ifdef CONFIG_PPC_83xx
/* Some Freescale processors have an erratum in which the TT
* port number in the queue head was 0..N-1 instead of 1..N.
*/
#define ehci_has_fsl_portno_bug(e) ((e)->has_fsl_port_bug)
#else
#define ehci_has_fsl_portno_bug(e) (0)
#endif
/*-------------------------------------------------------------------------*/
#ifndef DEBUG

View File

@ -2137,10 +2137,9 @@ static int etrax_usb_submit_bulk_urb(struct urb *urb)
urb->status = -EINPROGRESS;
/* Setup the hcpriv data. */
urb_priv = kmalloc(sizeof(etrax_urb_priv_t), KMALLOC_FLAG);
urb_priv = kzalloc(sizeof(etrax_urb_priv_t), KMALLOC_FLAG);
assert(urb_priv != NULL);
/* This sets rx_offset to 0. */
memset(urb_priv, 0, sizeof(etrax_urb_priv_t));
urb_priv->urb_state = NOT_STARTED;
urb->hcpriv = urb_priv;
@ -2475,10 +2474,9 @@ static int etrax_usb_submit_ctrl_urb(struct urb *urb)
urb->status = -EINPROGRESS;
/* Setup the hcpriv data. */
urb_priv = kmalloc(sizeof(etrax_urb_priv_t), KMALLOC_FLAG);
urb_priv = kzalloc(sizeof(etrax_urb_priv_t), KMALLOC_FLAG);
assert(urb_priv != NULL);
/* This sets rx_offset to 0. */
memset(urb_priv, 0, sizeof(etrax_urb_priv_t));
urb_priv->urb_state = NOT_STARTED;
urb->hcpriv = urb_priv;
@ -2767,9 +2765,8 @@ static void etrax_usb_add_to_intr_sb_list(struct urb *urb, int epid)
maxlen = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe));
interval = urb->interval;
urb_priv = kmalloc(sizeof(etrax_urb_priv_t), KMALLOC_FLAG);
urb_priv = kzalloc(sizeof(etrax_urb_priv_t), KMALLOC_FLAG);
assert(urb_priv != NULL);
memset(urb_priv, 0, sizeof(etrax_urb_priv_t));
urb->hcpriv = urb_priv;
first_ep = &TxIntrEPList[0];
@ -2997,9 +2994,8 @@ static void etrax_usb_add_to_isoc_sb_list(struct urb *urb, int epid)
prev_sb_desc = next_sb_desc = temp_sb_desc = NULL;
urb_priv = kmalloc(sizeof(etrax_urb_priv_t), GFP_ATOMIC);
urb_priv = kzalloc(sizeof(etrax_urb_priv_t), GFP_ATOMIC);
assert(urb_priv != NULL);
memset(urb_priv, 0, sizeof(etrax_urb_priv_t));
urb->hcpriv = urb_priv;
urb_priv->epid = epid;

View File

@ -724,7 +724,7 @@ static int isp116x_urb_enqueue(struct usb_hcd *hcd,
ep = hep->hcpriv;
else {
INIT_LIST_HEAD(&ep->schedule);
ep->udev = usb_get_dev(udev);
ep->udev = udev;
ep->epnum = epnum;
ep->maxpacket = usb_maxpacket(udev, urb->pipe, is_out);
usb_settoggle(udev, epnum, is_out, 0);
@ -891,7 +891,6 @@ static void isp116x_endpoint_disable(struct usb_hcd *hcd,
if (!list_empty(&hep->urb_list))
WARN("ep %p not empty?\n", ep);
usb_put_dev(ep->udev);
kfree(ep);
hep->hcpriv = NULL;
}
@ -1553,7 +1552,7 @@ static struct hc_driver isp116x_hc_driver = {
/*----------------------------------------------------------------*/
static int __init_or_module isp116x_remove(struct platform_device *pdev)
static int isp116x_remove(struct platform_device *pdev)
{
struct usb_hcd *hcd = platform_get_drvdata(pdev);
struct isp116x *isp116x;

View File

@ -0,0 +1,306 @@
/*
* OHCI HCD (Host Controller Driver) for USB.
*
* Copyright (C) 2004 SAN People (Pty) Ltd.
* Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
*
* AT91RM9200 Bus Glue
*
* Based on fragments of 2.4 driver by Rick Bronson.
* Based on ohci-omap.c
*
* This file is licenced under the GPL.
*/
#include <linux/clk.h>
#include <linux/platform_device.h>
#include <asm/mach-types.h>
#include <asm/hardware.h>
#include <asm/arch/board.h>
#ifndef CONFIG_ARCH_AT91RM9200
#error "This file is AT91RM9200 bus glue. CONFIG_ARCH_AT91RM9200 must be defined."
#endif
/* interface and function clocks */
static struct clk *iclk, *fclk;
extern int usb_disabled(void);
/*-------------------------------------------------------------------------*/
static void at91_start_hc(struct platform_device *pdev)
{
struct usb_hcd *hcd = platform_get_drvdata(pdev);
struct ohci_regs __iomem *regs = hcd->regs;
dev_dbg(&pdev->dev, "starting AT91RM9200 OHCI USB Controller\n");
/*
* Start the USB clocks.
*/
clk_enable(iclk);
clk_enable(fclk);
/*
* The USB host controller must remain in reset.
*/
writel(0, &regs->control);
}
static void at91_stop_hc(struct platform_device *pdev)
{
struct usb_hcd *hcd = platform_get_drvdata(pdev);
struct ohci_regs __iomem *regs = hcd->regs;
dev_dbg(&pdev->dev, "stopping AT91RM9200 OHCI USB Controller\n");
/*
* Put the USB host controller into reset.
*/
writel(0, &regs->control);
/*
* Stop the USB clocks.
*/
clk_disable(fclk);
clk_disable(iclk);
}
/*-------------------------------------------------------------------------*/
static int usb_hcd_at91_remove (struct usb_hcd *, struct platform_device *);
/* configure so an HC device and id are always provided */
/* always called with process context; sleeping is OK */
/**
* usb_hcd_at91_probe - initialize AT91RM9200-based HCDs
* Context: !in_interrupt()
*
* Allocates basic resources for this USB host controller, and
* then invokes the start() method for the HCD associated with it
* through the hotplug entry's driver_data.
*
* Store this function in the HCD's struct pci_driver as probe().
*/
int usb_hcd_at91_probe (const struct hc_driver *driver, struct platform_device *pdev)
{
int retval;
struct usb_hcd *hcd = NULL;
if (pdev->num_resources != 2) {
pr_debug("hcd probe: invalid num_resources");
return -ENODEV;
}
if ((pdev->resource[0].flags != IORESOURCE_MEM) || (pdev->resource[1].flags != IORESOURCE_IRQ)) {
pr_debug("hcd probe: invalid resource type\n");
return -ENODEV;
}
hcd = usb_create_hcd(driver, &pdev->dev, "at91rm9200");
if (!hcd)
return -ENOMEM;
hcd->rsrc_start = pdev->resource[0].start;
hcd->rsrc_len = pdev->resource[0].end - pdev->resource[0].start + 1;
if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
pr_debug("request_mem_region failed\n");
retval = -EBUSY;
goto err1;
}
hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
if (!hcd->regs) {
pr_debug("ioremap failed\n");
retval = -EIO;
goto err2;
}
iclk = clk_get(&pdev->dev, "ohci_clk");
fclk = clk_get(&pdev->dev, "uhpck");
at91_start_hc(pdev);
ohci_hcd_init(hcd_to_ohci(hcd));
retval = usb_add_hcd(hcd, pdev->resource[1].start, SA_INTERRUPT);
if (retval == 0)
return retval;
/* Error handling */
at91_stop_hc(pdev);
clk_put(fclk);
clk_put(iclk);
iounmap(hcd->regs);
err2:
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
err1:
usb_put_hcd(hcd);
return retval;
}
/* may be called without controller electrically present */
/* may be called with controller, bus, and devices active */
/**
* usb_hcd_at91_remove - shutdown processing for AT91RM9200-based HCDs
* @dev: USB Host Controller being removed
* Context: !in_interrupt()
*
* Reverses the effect of usb_hcd_at91_probe(), first invoking
* the HCD's stop() method. It is always called from a thread
* context, normally "rmmod", "apmd", or something similar.
*
*/
static int usb_hcd_at91_remove (struct usb_hcd *hcd, struct platform_device *pdev)
{
usb_remove_hcd(hcd);
at91_stop_hc(pdev);
iounmap(hcd->regs);
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
clk_put(fclk);
clk_put(iclk);
fclk = iclk = NULL;
dev_set_drvdata(&pdev->dev, NULL);
return 0;
}
/*-------------------------------------------------------------------------*/
static int __devinit
ohci_at91_start (struct usb_hcd *hcd)
{
// struct at91_ohci_data *board = hcd->self.controller->platform_data;
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
int ret;
if ((ret = ohci_init(ohci)) < 0)
return ret;
if ((ret = ohci_run(ohci)) < 0) {
err("can't start %s", hcd->self.bus_name);
ohci_stop(hcd);
return ret;
}
// hcd->self.root_hub->maxchild = board->ports;
return 0;
}
/*-------------------------------------------------------------------------*/
static const struct hc_driver ohci_at91_hc_driver = {
.description = hcd_name,
.product_desc = "AT91RM9200 OHCI",
.hcd_priv_size = sizeof(struct ohci_hcd),
/*
* generic hardware linkage
*/
.irq = ohci_irq,
.flags = HCD_USB11 | HCD_MEMORY,
/*
* basic lifecycle operations
*/
.start = ohci_at91_start,
.stop = ohci_stop,
/*
* managing i/o requests and associated device resources
*/
.urb_enqueue = ohci_urb_enqueue,
.urb_dequeue = ohci_urb_dequeue,
.endpoint_disable = ohci_endpoint_disable,
/*
* scheduling support
*/
.get_frame_number = ohci_get_frame,
/*
* root hub support
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
#ifdef CONFIG_PM
.hub_suspend = ohci_hub_suspend,
.hub_resume = ohci_hub_resume,
#endif
.start_port_reset = ohci_start_port_reset,
};
/*-------------------------------------------------------------------------*/
static int ohci_hcd_at91_drv_probe(struct platform_device *dev)
{
return usb_hcd_at91_probe(&ohci_at91_hc_driver, dev);
}
static int ohci_hcd_at91_drv_remove(struct platform_device *dev)
{
return usb_hcd_at91_remove(platform_get_drvdata(dev), dev);
}
#ifdef CONFIG_PM
static int ohci_hcd_at91_drv_suspend(struct platform_device *dev, u32 state, u32 level)
{
printk("%s(%s:%d): not implemented yet\n",
__func__, __FILE__, __LINE__);
clk_disable(fclk);
return 0;
}
static int ohci_hcd_at91_drv_resume(struct platform_device *dev, u32 state)
{
printk("%s(%s:%d): not implemented yet\n",
__func__, __FILE__, __LINE__);
clk_enable(fclk);
return 0;
}
#else
#define ohci_hcd_at91_drv_suspend NULL
#define ohci_hcd_at91_drv_resume NULL
#endif
static struct platform_driver ohci_hcd_at91_driver = {
.probe = ohci_hcd_at91_drv_probe,
.remove = ohci_hcd_at91_drv_remove,
.suspend = ohci_hcd_at91_drv_suspend,
.resume = ohci_hcd_at91_drv_resume,
.driver = {
.name = "at91rm9200-ohci",
.owner = THIS_MODULE,
},
};
static int __init ohci_hcd_at91_init (void)
{
if (usb_disabled())
return -ENODEV;
return platform_driver_register(&ohci_hcd_at91_driver);
}
static void __exit ohci_hcd_at91_cleanup (void)
{
platform_driver_unregister(&ohci_hcd_at91_driver);
}
module_init (ohci_hcd_at91_init);
module_exit (ohci_hcd_at91_cleanup);

View File

@ -23,6 +23,8 @@
#include <asm/mach-au1x00/au1000.h>
#ifndef CONFIG_SOC_AU1200
#define USBH_ENABLE_BE (1<<0)
#define USBH_ENABLE_C (1<<1)
#define USBH_ENABLE_E (1<<2)
@ -37,21 +39,68 @@
#error not byte order defined
#endif
#else /* Au1200 */
#define USB_HOST_CONFIG (USB_MSR_BASE + USB_MSR_MCFG)
#define USB_MCFG_PFEN (1<<31)
#define USB_MCFG_RDCOMB (1<<30)
#define USB_MCFG_SSDEN (1<<23)
#define USB_MCFG_OHCCLKEN (1<<16)
#define USB_MCFG_UCAM (1<<7)
#define USB_MCFG_OBMEN (1<<1)
#define USB_MCFG_OMEMEN (1<<0)
#define USBH_ENABLE_CE USB_MCFG_OHCCLKEN
#ifdef CONFIG_DMA_COHERENT
#define USBH_ENABLE_INIT (USB_MCFG_OHCCLKEN \
| USB_MCFG_PFEN | USB_MCFG_RDCOMB \
| USB_MCFG_SSDEN | USB_MCFG_UCAM \
| USB_MCFG_OBMEN | USB_MCFG_OMEMEN)
#else
#define USBH_ENABLE_INIT (USB_MCFG_OHCCLKEN \
| USB_MCFG_PFEN | USB_MCFG_RDCOMB \
| USB_MCFG_SSDEN \
| USB_MCFG_OBMEN | USB_MCFG_OMEMEN)
#endif
#define USBH_DISABLE (USB_MCFG_OBMEN | USB_MCFG_OMEMEN)
#endif /* Au1200 */
extern int usb_disabled(void);
/*-------------------------------------------------------------------------*/
static void au1xxx_start_hc(struct platform_device *dev)
static void au1xxx_start_ohc(struct platform_device *dev)
{
printk(KERN_DEBUG __FILE__
": starting Au1xxx OHCI USB Controller\n");
/* enable host controller */
#ifndef CONFIG_SOC_AU1200
au_writel(USBH_ENABLE_CE, USB_HOST_CONFIG);
udelay(1000);
au_writel(USBH_ENABLE_INIT, USB_HOST_CONFIG);
udelay(1000);
#else /* Au1200 */
/* write HW defaults again in case Yamon cleared them */
if (au_readl(USB_HOST_CONFIG) == 0) {
au_writel(0x00d02000, USB_HOST_CONFIG);
au_readl(USB_HOST_CONFIG);
udelay(1000);
}
au_writel(USBH_ENABLE_CE | au_readl(USB_HOST_CONFIG), USB_HOST_CONFIG);
au_readl(USB_HOST_CONFIG);
udelay(1000);
au_writel(USBH_ENABLE_INIT | au_readl(USB_HOST_CONFIG), USB_HOST_CONFIG);
au_readl(USB_HOST_CONFIG);
udelay(1000);
#endif /* Au1200 */
/* wait for reset complete (read register twice; see au1500 errata) */
while (au_readl(USB_HOST_CONFIG),
!(au_readl(USB_HOST_CONFIG) & USBH_ENABLE_RD))
@ -61,13 +110,25 @@ static void au1xxx_start_hc(struct platform_device *dev)
": Clock to USB host has been enabled \n");
}
static void au1xxx_stop_hc(struct platform_device *dev)
static void au1xxx_stop_ohc(struct platform_device *dev)
{
printk(KERN_DEBUG __FILE__
": stopping Au1xxx OHCI USB Controller\n");
#ifndef CONFIG_SOC_AU1200
/* Disable clock */
au_writel(au_readl(USB_HOST_CONFIG) & ~USBH_ENABLE_CE, USB_HOST_CONFIG);
#else /* Au1200 */
/* Disable mem */
au_writel(~USBH_DISABLE & au_readl(USB_HOST_CONFIG), USB_HOST_CONFIG);
udelay(1000);
/* Disable clock */
au_writel(~USBH_ENABLE_CE & au_readl(USB_HOST_CONFIG), USB_HOST_CONFIG);
au_readl(USB_HOST_CONFIG);
#endif /* Au1200 */
}
@ -78,7 +139,7 @@ static void au1xxx_stop_hc(struct platform_device *dev)
/**
* usb_hcd_au1xxx_probe - initialize Au1xxx-based HCDs
* usb_ohci_au1xxx_probe - initialize Au1xxx-based HCDs
* Context: !in_interrupt()
*
* Allocates basic resources for this USB host controller, and
@ -86,14 +147,25 @@ static void au1xxx_stop_hc(struct platform_device *dev)
* through the hotplug entry's driver_data.
*
*/
int usb_hcd_au1xxx_probe (const struct hc_driver *driver,
static int usb_ohci_au1xxx_probe(const struct hc_driver *driver,
struct platform_device *dev)
{
int retval;
struct usb_hcd *hcd;
if(dev->resource[1].flags != IORESOURCE_IRQ) {
pr_debug ("resource[1] is not IORESOURCE_IRQ");
#if defined(CONFIG_SOC_AU1200) && defined(CONFIG_DMA_COHERENT)
/* Au1200 AB USB does not support coherent memory */
if (!(read_c0_prid() & 0xff)) {
pr_info("%s: this is chip revision AB !!\n",
dev->dev.name);
pr_info("%s: update your board or re-configure the kernel\n",
dev->dev.name);
return -ENODEV;
}
#endif
if (dev->resource[1].flags != IORESOURCE_IRQ) {
pr_debug("resource[1] is not IORESOURCE_IRQ\n");
return -ENOMEM;
}
@ -104,26 +176,26 @@ int usb_hcd_au1xxx_probe (const struct hc_driver *driver,
hcd->rsrc_len = dev->resource[0].end - dev->resource[0].start + 1;
if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
pr_debug("request_mem_region failed");
pr_debug("request_mem_region failed\n");
retval = -EBUSY;
goto err1;
}
hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
if (!hcd->regs) {
pr_debug("ioremap failed");
pr_debug("ioremap failed\n");
retval = -ENOMEM;
goto err2;
}
au1xxx_start_hc(dev);
au1xxx_start_ohc(dev);
ohci_hcd_init(hcd_to_ohci(hcd));
retval = usb_add_hcd(hcd, dev->resource[1].start, SA_INTERRUPT);
retval = usb_add_hcd(hcd, dev->resource[1].start, SA_INTERRUPT | SA_SHIRQ);
if (retval == 0)
return retval;
au1xxx_stop_hc(dev);
au1xxx_stop_ohc(dev);
iounmap(hcd->regs);
err2:
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
@ -146,10 +218,10 @@ int usb_hcd_au1xxx_probe (const struct hc_driver *driver,
* context, normally "rmmod", "apmd", or something similar.
*
*/
void usb_hcd_au1xxx_remove (struct usb_hcd *hcd, struct platform_device *dev)
static void usb_ohci_au1xxx_remove(struct usb_hcd *hcd, struct platform_device *dev)
{
usb_remove_hcd(hcd);
au1xxx_stop_hc(dev);
au1xxx_stop_ohc(dev);
iounmap(hcd->regs);
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
usb_put_hcd(hcd);
@ -235,7 +307,7 @@ static int ohci_hcd_au1xxx_drv_probe(struct platform_device *pdev)
if (usb_disabled())
return -ENODEV;
ret = usb_hcd_au1xxx_probe(&ohci_au1xxx_hc_driver, pdev);
ret = usb_ohci_au1xxx_probe(&ohci_au1xxx_hc_driver, pdev);
return ret;
}
@ -243,7 +315,7 @@ static int ohci_hcd_au1xxx_drv_remove(struct platform_device *pdev)
{
struct usb_hcd *hcd = platform_get_drvdata(pdev);
usb_hcd_au1xxx_remove(hcd, pdev);
usb_ohci_au1xxx_remove(hcd, pdev);
return 0;
}
/*TBD*/

View File

@ -443,11 +443,16 @@ ohci_reboot (struct notifier_block *block, unsigned long code, void *null)
static int ohci_init (struct ohci_hcd *ohci)
{
int ret;
struct usb_hcd *hcd = ohci_to_hcd(ohci);
disable (ohci);
ohci->regs = ohci_to_hcd(ohci)->regs;
ohci->regs = hcd->regs;
ohci->next_statechange = jiffies;
/* REVISIT this BIOS handshake is now moved into PCI "quirks", and
* was never needed for most non-PCI systems ... remove the code?
*/
#ifndef IR_DISABLE
/* SMM owns the HC? not for long! */
if (!no_handshake && ohci_readl (ohci,
@ -478,8 +483,10 @@ static int ohci_init (struct ohci_hcd *ohci)
/* Disable HC interrupts */
ohci_writel (ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable);
// flush the writes
(void) ohci_readl (ohci, &ohci->regs->control);
/* flush the writes, and save key bits like RWC */
if (ohci_readl (ohci, &ohci->regs->control) & OHCI_CTRL_RWC)
ohci->hc_control |= OHCI_CTRL_RWC;
/* Read the number of ports unless overridden */
if (ohci->num_ports == 0)
@ -488,16 +495,19 @@ static int ohci_init (struct ohci_hcd *ohci)
if (ohci->hcca)
return 0;
ohci->hcca = dma_alloc_coherent (ohci_to_hcd(ohci)->self.controller,
ohci->hcca = dma_alloc_coherent (hcd->self.controller,
sizeof *ohci->hcca, &ohci->hcca_dma, 0);
if (!ohci->hcca)
return -ENOMEM;
if ((ret = ohci_mem_init (ohci)) < 0)
ohci_stop (ohci_to_hcd(ohci));
ohci_stop (hcd);
else {
register_reboot_notifier (&ohci->reboot_notifier);
create_debug_files (ohci);
}
return ret;
}
/*-------------------------------------------------------------------------*/
@ -510,6 +520,7 @@ static int ohci_run (struct ohci_hcd *ohci)
{
u32 mask, temp;
int first = ohci->fminterval == 0;
struct usb_hcd *hcd = ohci_to_hcd(ohci);
disable (ohci);
@ -525,18 +536,17 @@ static int ohci_run (struct ohci_hcd *ohci)
/* also: power/overcurrent flags in roothub.a */
}
/* Reset USB nearly "by the book". RemoteWakeupConnected
* saved if boot firmware (BIOS/SMM/...) told us it's connected
* (for OHCI integrated on mainboard, it normally is)
/* Reset USB nearly "by the book". RemoteWakeupConnected was
* saved if boot firmware (BIOS/SMM/...) told us it's connected,
* or if bus glue did the same (e.g. for PCI add-in cards with
* PCI PM support).
*/
ohci->hc_control = ohci_readl (ohci, &ohci->regs->control);
ohci_dbg (ohci, "resetting from state '%s', control = 0x%x\n",
hcfs2string (ohci->hc_control & OHCI_CTRL_HCFS),
ohci->hc_control);
if (ohci->hc_control & OHCI_CTRL_RWC
&& !(ohci->flags & OHCI_QUIRK_AMD756))
ohci_to_hcd(ohci)->can_wakeup = 1;
ohci_readl (ohci, &ohci->regs->control));
if ((ohci->hc_control & OHCI_CTRL_RWC) != 0
&& !device_may_wakeup(hcd->self.controller))
device_init_wakeup(hcd->self.controller, 1);
switch (ohci->hc_control & OHCI_CTRL_HCFS) {
case OHCI_USB_OPER:
@ -632,7 +642,7 @@ retry:
ohci->hc_control &= OHCI_CTRL_RWC;
ohci->hc_control |= OHCI_CONTROL_INIT | OHCI_USB_OPER;
ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
ohci_to_hcd(ohci)->state = HC_STATE_RUNNING;
hcd->state = HC_STATE_RUNNING;
/* wake on ConnectStatusChange, matching external hubs */
ohci_writel (ohci, RH_HS_DRWE, &ohci->regs->roothub.status);
@ -667,15 +677,10 @@ retry:
// POTPGT delay is bits 24-31, in 2 ms units.
mdelay ((temp >> 23) & 0x1fe);
ohci_to_hcd(ohci)->state = HC_STATE_RUNNING;
hcd->state = HC_STATE_RUNNING;
ohci_dump (ohci, 1);
if (ohci_to_hcd(ohci)->self.root_hub == NULL) {
register_reboot_notifier (&ohci->reboot_notifier);
create_debug_files (ohci);
}
return 0;
}
@ -905,6 +910,10 @@ MODULE_LICENSE ("GPL");
#include "ohci-ppc-soc.c"
#endif
#ifdef CONFIG_ARCH_AT91RM9200
#include "ohci-at91.c"
#endif
#if !(defined(CONFIG_PCI) \
|| defined(CONFIG_SA1111) \
|| defined(CONFIG_ARCH_S3C2410) \
@ -913,6 +922,7 @@ MODULE_LICENSE ("GPL");
|| defined (CONFIG_PXA27x) \
|| defined (CONFIG_SOC_AU1X00) \
|| defined (CONFIG_USB_OHCI_HCD_PPC_SOC) \
|| defined (CONFIG_ARCH_AT91RM9200) \
)
#error "missing bus glue for ohci-hcd"
#endif

View File

@ -107,7 +107,7 @@ static int ohci_bus_suspend (struct usb_hcd *hcd)
&ohci->regs->intrstatus);
/* maybe resume can wake root hub */
if (hcd->remote_wakeup)
if (device_may_wakeup(&ohci_to_hcd(ohci)->self.root_hub->dev))
ohci->hc_control |= OHCI_CTRL_RWE;
else
ohci->hc_control &= ~OHCI_CTRL_RWE;
@ -246,9 +246,9 @@ static int ohci_bus_resume (struct usb_hcd *hcd)
(void) ohci_readl (ohci, &ohci->regs->control);
msleep (3);
temp = OHCI_CONTROL_INIT | OHCI_USB_OPER;
if (hcd->can_wakeup)
temp |= OHCI_CTRL_RWC;
temp = ohci->hc_control;
temp &= OHCI_CTRL_RWC;
temp |= OHCI_CONTROL_INIT | OHCI_USB_OPER;
ohci->hc_control = temp;
ohci_writel (ohci, temp, &ohci->regs->control);
(void) ohci_readl (ohci, &ohci->regs->control);
@ -302,7 +302,7 @@ ohci_hub_status_data (struct usb_hcd *hcd, char *buf)
{
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
int i, changed = 0, length = 1;
int can_suspend = hcd->can_wakeup;
int can_suspend = device_may_wakeup(&hcd->self.root_hub->dev);
unsigned long flags;
spin_lock_irqsave (&ohci->lock, flags);
@ -354,7 +354,7 @@ ohci_hub_status_data (struct usb_hcd *hcd, char *buf)
*/
if (!(status & RH_PS_CCS))
continue;
if ((status & RH_PS_PSS) && hcd->remote_wakeup)
if ((status & RH_PS_PSS) && can_suspend)
continue;
can_suspend = 0;
}

View File

@ -35,7 +35,10 @@ ohci_pci_start (struct usb_hcd *hcd)
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
int ret;
if(hcd->self.controller && hcd->self.controller->bus == &pci_bus_type) {
/* REVISIT this whole block should move to reset(), which handles
* all the other one-time init.
*/
if (hcd->self.controller) {
struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
/* AMD 756, for most chips (early revs), corrupts register
@ -45,7 +48,8 @@ ohci_pci_start (struct usb_hcd *hcd)
&& pdev->device == 0x740c) {
ohci->flags = OHCI_QUIRK_AMD756;
ohci_dbg (ohci, "AMD756 erratum 4 workaround\n");
// also somewhat erratum 10 (suspend/resume issues)
/* also erratum 10 (suspend/resume issues) */
device_init_wakeup(&hcd->self.root_hub->dev, 0);
}
/* FIXME for some of the early AMD 760 southbridges, OHCI
@ -88,6 +92,13 @@ ohci_pci_start (struct usb_hcd *hcd)
ohci_dbg (ohci,
"enabled Compaq ZFMicro chipset quirk\n");
}
/* RWC may not be set for add-in PCI cards, since boot
* firmware probably ignored them. This transfers PCI
* PM wakeup capabilities (once the PCI layer is fixed).
*/
if (device_may_wakeup(&pdev->dev))
ohci->hc_control |= OHCI_CTRL_RWC;
}
/* NOTE: there may have already been a first reset, to

View File

@ -853,7 +853,7 @@ static int sl811h_urb_enqueue(
} else {
INIT_LIST_HEAD(&ep->schedule);
ep->udev = usb_get_dev(udev);
ep->udev = udev;
ep->epnum = epnum;
ep->maxpacket = usb_maxpacket(udev, urb->pipe, is_out);
ep->defctrl = SL11H_HCTLMASK_ARM | SL11H_HCTLMASK_ENABLE;
@ -1052,7 +1052,6 @@ sl811h_endpoint_disable(struct usb_hcd *hcd, struct usb_host_endpoint *hep)
if (!list_empty(&hep->urb_list))
WARN("ep %p not empty?\n", ep);
usb_put_dev(ep->udev);
kfree(ep);
hep->hcpriv = NULL;
}

View File

@ -17,10 +17,13 @@
#include "uhci-hcd.h"
static struct dentry *uhci_debugfs_root = NULL;
#define uhci_debug_operations (* (struct file_operations *) NULL)
static struct dentry *uhci_debugfs_root;
#ifdef DEBUG
/* Handle REALLY large printks so we don't overflow buffers */
static inline void lprintk(char *buf)
static void lprintk(char *buf)
{
char *p;
@ -90,13 +93,59 @@ static int uhci_show_td(struct uhci_td *td, char *buf, int len, int space)
return out - buf;
}
static int uhci_show_urbp(struct urb_priv *urbp, char *buf, int len, int space)
{
char *out = buf;
struct uhci_td *td;
int i, nactive, ninactive;
if (len < 200)
return 0;
out += sprintf(out, "urb_priv [%p] ", urbp);
out += sprintf(out, "urb [%p] ", urbp->urb);
out += sprintf(out, "qh [%p] ", urbp->qh);
out += sprintf(out, "Dev=%d ", usb_pipedevice(urbp->urb->pipe));
out += sprintf(out, "EP=%x(%s) ", usb_pipeendpoint(urbp->urb->pipe),
(usb_pipein(urbp->urb->pipe) ? "IN" : "OUT"));
switch (usb_pipetype(urbp->urb->pipe)) {
case PIPE_ISOCHRONOUS: out += sprintf(out, "ISO"); break;
case PIPE_INTERRUPT: out += sprintf(out, "INT"); break;
case PIPE_BULK: out += sprintf(out, "BLK"); break;
case PIPE_CONTROL: out += sprintf(out, "CTL"); break;
}
out += sprintf(out, "%s", (urbp->fsbr ? " FSBR" : ""));
if (urbp->urb->status != -EINPROGRESS)
out += sprintf(out, " Status=%d", urbp->urb->status);
out += sprintf(out, "\n");
i = nactive = ninactive = 0;
list_for_each_entry(td, &urbp->td_list, list) {
if (++i <= 10 || debug > 2) {
out += sprintf(out, "%*s%d: ", space + 2, "", i);
out += uhci_show_td(td, out, len - (out - buf), 0);
} else {
if (td_status(td) & TD_CTRL_ACTIVE)
++nactive;
else
++ninactive;
}
}
if (nactive + ninactive > 0)
out += sprintf(out, "%*s[skipped %d inactive and %d active "
"TDs]\n",
space, "", ninactive, nactive);
return out - buf;
}
static int uhci_show_qh(struct uhci_qh *qh, char *buf, int len, int space)
{
char *out = buf;
struct urb_priv *urbp;
struct list_head *head, *tmp;
struct uhci_td *td;
int i = 0, checked = 0, prevactive = 0;
int i, nurbs;
__le32 element = qh_element(qh);
/* Try to make sure there's enough memory */
@ -118,86 +167,40 @@ static int uhci_show_qh(struct uhci_qh *qh, char *buf, int len, int space)
if (!(element & ~(UHCI_PTR_QH | UHCI_PTR_DEPTH)))
out += sprintf(out, "%*s Element is NULL (bug?)\n", space, "");
if (!qh->urbp) {
out += sprintf(out, "%*s urbp == NULL\n", space, "");
goto out;
}
if (list_empty(&qh->queue)) {
out += sprintf(out, "%*s queue is empty\n", space, "");
} else {
struct urb_priv *urbp = list_entry(qh->queue.next,
struct urb_priv, node);
struct uhci_td *td = list_entry(urbp->td_list.next,
struct uhci_td, list);
urbp = qh->urbp;
head = &urbp->td_list;
tmp = head->next;
td = list_entry(tmp, struct uhci_td, list);
if (cpu_to_le32(td->dma_handle) != (element & ~UHCI_PTR_BITS))
out += sprintf(out, "%*s Element != First TD\n", space, "");
while (tmp != head) {
struct uhci_td *td = list_entry(tmp, struct uhci_td, list);
tmp = tmp->next;
out += sprintf(out, "%*s%d: ", space + 2, "", i++);
out += uhci_show_td(td, out, len - (out - buf), 0);
if (i > 10 && !checked && prevactive && tmp != head &&
debug <= 2) {
struct list_head *ntmp = tmp;
struct uhci_td *ntd = td;
int active = 1, ni = i;
checked = 1;
while (ntmp != head && ntmp->next != head && active) {
ntd = list_entry(ntmp, struct uhci_td, list);
ntmp = ntmp->next;
active = td_status(ntd) & TD_CTRL_ACTIVE;
ni++;
}
if (active && ni > i) {
out += sprintf(out, "%*s[skipped %d active TDs]\n", space, "", ni - i);
tmp = ntmp;
td = ntd;
i = ni;
}
if (cpu_to_le32(td->dma_handle) != (element & ~UHCI_PTR_BITS))
out += sprintf(out, "%*s Element != First TD\n",
space, "");
i = nurbs = 0;
list_for_each_entry(urbp, &qh->queue, node) {
if (++i <= 10)
out += uhci_show_urbp(urbp, out,
len - (out - buf), space + 2);
else
++nurbs;
}
prevactive = td_status(td) & TD_CTRL_ACTIVE;
if (nurbs > 0)
out += sprintf(out, "%*s Skipped %d URBs\n",
space, "", nurbs);
}
if (list_empty(&urbp->queue_list) || urbp->queued)
goto out;
out += sprintf(out, "%*sQueued QHs:\n", -space, "--");
head = &urbp->queue_list;
tmp = head->next;
while (tmp != head) {
struct urb_priv *nurbp = list_entry(tmp, struct urb_priv,
queue_list);
tmp = tmp->next;
out += uhci_show_qh(nurbp->qh, out, len - (out - buf), space);
if (qh->udev) {
out += sprintf(out, "%*s Dummy TD\n", space, "");
out += uhci_show_td(qh->dummy_td, out, len - (out - buf), 0);
}
out:
return out - buf;
}
#define show_frame_num() \
if (!shown) { \
shown = 1; \
out += sprintf(out, "- Frame %d\n", i); \
}
#ifdef CONFIG_PROC_FS
static const char * const qh_names[] = {
"skel_unlink_qh", "skel_iso_qh",
"skel_int128_qh", "skel_int64_qh",
"skel_int32_qh", "skel_int16_qh",
"skel_int8_qh", "skel_int4_qh",
@ -206,12 +209,6 @@ static const char * const qh_names[] = {
"skel_bulk_qh", "skel_term_qh"
};
#define show_qh_name() \
if (!shown) { \
shown = 1; \
out += sprintf(out, "- %s\n", qh_names[i]); \
}
static int uhci_show_sc(int port, unsigned short status, char *buf, int len)
{
char *out = buf;
@ -321,139 +318,29 @@ static int uhci_show_status(struct uhci_hcd *uhci, char *buf, int len)
return out - buf;
}
static int uhci_show_urbp(struct uhci_hcd *uhci, struct urb_priv *urbp, char *buf, int len)
{
struct list_head *tmp;
char *out = buf;
int count = 0;
if (len < 200)
return 0;
out += sprintf(out, "urb_priv [%p] ", urbp);
out += sprintf(out, "urb [%p] ", urbp->urb);
out += sprintf(out, "qh [%p] ", urbp->qh);
out += sprintf(out, "Dev=%d ", usb_pipedevice(urbp->urb->pipe));
out += sprintf(out, "EP=%x(%s) ", usb_pipeendpoint(urbp->urb->pipe), (usb_pipein(urbp->urb->pipe) ? "IN" : "OUT"));
switch (usb_pipetype(urbp->urb->pipe)) {
case PIPE_ISOCHRONOUS: out += sprintf(out, "ISO "); break;
case PIPE_INTERRUPT: out += sprintf(out, "INT "); break;
case PIPE_BULK: out += sprintf(out, "BLK "); break;
case PIPE_CONTROL: out += sprintf(out, "CTL "); break;
}
out += sprintf(out, "%s", (urbp->fsbr ? "FSBR " : ""));
out += sprintf(out, "%s", (urbp->fsbr_timeout ? "FSBR_TO " : ""));
if (urbp->urb->status != -EINPROGRESS)
out += sprintf(out, "Status=%d ", urbp->urb->status);
//out += sprintf(out, "FSBRtime=%lx ",urbp->fsbrtime);
count = 0;
list_for_each(tmp, &urbp->td_list)
count++;
out += sprintf(out, "TDs=%d ",count);
if (urbp->queued)
out += sprintf(out, "queued\n");
else {
count = 0;
list_for_each(tmp, &urbp->queue_list)
count++;
out += sprintf(out, "queued URBs=%d\n", count);
}
return out - buf;
}
static int uhci_show_lists(struct uhci_hcd *uhci, char *buf, int len)
{
char *out = buf;
struct list_head *head, *tmp;
int count;
out += sprintf(out, "Main list URBs:");
if (list_empty(&uhci->urb_list))
out += sprintf(out, " Empty\n");
else {
out += sprintf(out, "\n");
count = 0;
head = &uhci->urb_list;
tmp = head->next;
while (tmp != head) {
struct urb_priv *urbp = list_entry(tmp, struct urb_priv, urb_list);
out += sprintf(out, " %d: ", ++count);
out += uhci_show_urbp(uhci, urbp, out, len - (out - buf));
tmp = tmp->next;
}
}
out += sprintf(out, "Remove list URBs:");
if (list_empty(&uhci->urb_remove_list))
out += sprintf(out, " Empty\n");
else {
out += sprintf(out, "\n");
count = 0;
head = &uhci->urb_remove_list;
tmp = head->next;
while (tmp != head) {
struct urb_priv *urbp = list_entry(tmp, struct urb_priv, urb_list);
out += sprintf(out, " %d: ", ++count);
out += uhci_show_urbp(uhci, urbp, out, len - (out - buf));
tmp = tmp->next;
}
}
out += sprintf(out, "Complete list URBs:");
if (list_empty(&uhci->complete_list))
out += sprintf(out, " Empty\n");
else {
out += sprintf(out, "\n");
count = 0;
head = &uhci->complete_list;
tmp = head->next;
while (tmp != head) {
struct urb_priv *urbp = list_entry(tmp, struct urb_priv, urb_list);
out += sprintf(out, " %d: ", ++count);
out += uhci_show_urbp(uhci, urbp, out, len - (out - buf));
tmp = tmp->next;
}
}
return out - buf;
}
static int uhci_sprint_schedule(struct uhci_hcd *uhci, char *buf, int len)
{
unsigned long flags;
char *out = buf;
int i, j;
struct uhci_qh *qh;
struct uhci_td *td;
struct list_head *tmp, *head;
spin_lock_irqsave(&uhci->lock, flags);
out += uhci_show_root_hub_state(uhci, out, len - (out - buf));
out += sprintf(out, "HC status\n");
out += uhci_show_status(uhci, out, len - (out - buf));
if (debug <= 1)
return out - buf;
out += sprintf(out, "Frame List\n");
for (i = 0; i < UHCI_NUMFRAMES; ++i) {
int shown = 0;
td = uhci->frame_cpu[i];
if (!td)
continue;
if (td->dma_handle != (dma_addr_t)uhci->frame[i]) {
show_frame_num();
out += sprintf(out, "- Frame %d\n", i); \
if (td->dma_handle != (dma_addr_t)uhci->frame[i])
out += sprintf(out, " frame list does not match td->dma_handle!\n");
}
show_frame_num();
head = &td->fl_list;
tmp = head;
@ -467,14 +354,11 @@ static int uhci_sprint_schedule(struct uhci_hcd *uhci, char *buf, int len)
out += sprintf(out, "Skeleton QHs\n");
for (i = 0; i < UHCI_NUM_SKELQH; ++i) {
int shown = 0;
int cnt = 0;
qh = uhci->skelqh[i];
if (debug > 1) {
show_qh_name();
out += uhci_show_qh(qh, out, len - (out - buf), 4);
}
out += sprintf(out, "- %s\n", qh_names[i]); \
out += uhci_show_qh(qh, out, len - (out - buf), 4);
/* Last QH is the Terminating QH, it's different */
if (i == UHCI_NUM_SKELQH - 1) {
@ -487,53 +371,37 @@ static int uhci_sprint_schedule(struct uhci_hcd *uhci, char *buf, int len)
continue;
}
j = (i < 7) ? 7 : i+1; /* Next skeleton */
if (list_empty(&qh->list)) {
if (i < UHCI_NUM_SKELQH - 1) {
if (qh->link !=
(cpu_to_le32(uhci->skelqh[j]->dma_handle) | UHCI_PTR_QH)) {
show_qh_name();
out += sprintf(out, " skeleton QH not linked to next skeleton QH!\n");
}
}
continue;
}
show_qh_name();
head = &qh->list;
j = (i < 9) ? 9 : i+1; /* Next skeleton */
head = &qh->node;
tmp = head->next;
while (tmp != head) {
qh = list_entry(tmp, struct uhci_qh, list);
qh = list_entry(tmp, struct uhci_qh, node);
tmp = tmp->next;
out += uhci_show_qh(qh, out, len - (out - buf), 4);
if (++cnt <= 10)
out += uhci_show_qh(qh, out,
len - (out - buf), 4);
}
if ((cnt -= 10) > 0)
out += sprintf(out, " Skipped %d QHs\n", cnt);
if (i < UHCI_NUM_SKELQH - 1) {
if (i > 1 && i < UHCI_NUM_SKELQH - 1) {
if (qh->link !=
(cpu_to_le32(uhci->skelqh[j]->dma_handle) | UHCI_PTR_QH))
out += sprintf(out, " last QH not linked to next skeleton!\n");
}
}
if (debug > 2)
out += uhci_show_lists(uhci, out, len - (out - buf));
spin_unlock_irqrestore(&uhci->lock, flags);
return out - buf;
}
#ifdef CONFIG_DEBUG_FS
#define MAX_OUTPUT (64 * 1024)
struct uhci_debug {
int size;
char *data;
struct uhci_hcd *uhci;
};
static int uhci_debug_open(struct inode *inode, struct file *file)
@ -541,6 +409,7 @@ static int uhci_debug_open(struct inode *inode, struct file *file)
struct uhci_hcd *uhci = inode->u.generic_ip;
struct uhci_debug *up;
int ret = -ENOMEM;
unsigned long flags;
lock_kernel();
up = kmalloc(sizeof(*up), GFP_KERNEL);
@ -553,7 +422,11 @@ static int uhci_debug_open(struct inode *inode, struct file *file)
goto out;
}
up->size = uhci_sprint_schedule(uhci, up->data, MAX_OUTPUT);
up->size = 0;
spin_lock_irqsave(&uhci->lock, flags);
if (uhci->is_initialized)
up->size = uhci_sprint_schedule(uhci, up->data, MAX_OUTPUT);
spin_unlock_irqrestore(&uhci->lock, flags);
file->private_data = up;
@ -604,15 +477,32 @@ static int uhci_debug_release(struct inode *inode, struct file *file)
return 0;
}
#undef uhci_debug_operations
static struct file_operations uhci_debug_operations = {
.owner = THIS_MODULE,
.open = uhci_debug_open,
.llseek = uhci_debug_lseek,
.read = uhci_debug_read,
.release = uhci_debug_release,
};
#else /* CONFIG_DEBUG_FS */
#endif /* CONFIG_DEBUG_FS */
#define uhci_debug_operations (* (struct file_operations *) NULL)
#else /* DEBUG */
static inline void lprintk(char *buf)
{}
static inline int uhci_show_qh(struct uhci_qh *qh, char *buf,
int len, int space)
{
return 0;
}
static inline int uhci_sprint_schedule(struct uhci_hcd *uhci,
char *buf, int len)
{
return 0;
}
#endif

View File

@ -54,7 +54,7 @@
/*
* Version Information
*/
#define DRIVER_VERSION "v2.3"
#define DRIVER_VERSION "v3.0"
#define DRIVER_AUTHOR "Linus 'Frodo Rabbit' Torvalds, Johannes Erdfelt, \
Randy Dunlap, Georg Acher, Deti Fliegl, Thomas Sailer, Roman Weissgaerber, \
Alan Stern"
@ -68,12 +68,16 @@ Alan Stern"
* debug = 3, show all TDs in URBs when dumping
*/
#ifdef DEBUG
#define DEBUG_CONFIGURED 1
static int debug = 1;
#else
static int debug = 0;
#endif
module_param(debug, int, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(debug, "Debug level");
#else
#define DEBUG_CONFIGURED 0
#define debug 0
#endif
static char *errbuf;
#define ERRBUF_LEN (32 * 1024)
@ -338,6 +342,12 @@ static irqreturn_t uhci_irq(struct usb_hcd *hcd, struct pt_regs *regs)
dev_err(uhci_dev(uhci),
"host controller halted, "
"very bad!\n");
if (debug > 1 && errbuf) {
/* Print the schedule for debugging */
uhci_sprint_schedule(uhci,
errbuf, ERRBUF_LEN);
lprintk(errbuf);
}
hc_died(uhci);
/* Force a callback in case there are
@ -376,6 +386,14 @@ static void release_uhci(struct uhci_hcd *uhci)
{
int i;
if (DEBUG_CONFIGURED) {
spin_lock_irq(&uhci->lock);
uhci->is_initialized = 0;
spin_unlock_irq(&uhci->lock);
debugfs_remove(uhci->dentry);
}
for (i = 0; i < UHCI_NUM_SKELQH; i++)
uhci_free_qh(uhci, uhci->skelqh[i]);
@ -390,8 +408,6 @@ static void release_uhci(struct uhci_hcd *uhci)
dma_free_coherent(uhci_dev(uhci),
UHCI_NUMFRAMES * sizeof(*uhci->frame),
uhci->frame, uhci->frame_dma_handle);
debugfs_remove(uhci->dentry);
}
static int uhci_reset(struct usb_hcd *hcd)
@ -474,33 +490,29 @@ static int uhci_start(struct usb_hcd *hcd)
hcd->uses_new_polling = 1;
dentry = debugfs_create_file(hcd->self.bus_name,
S_IFREG|S_IRUGO|S_IWUSR, uhci_debugfs_root, uhci,
&uhci_debug_operations);
if (!dentry) {
dev_err(uhci_dev(uhci),
"couldn't create uhci debugfs entry\n");
retval = -ENOMEM;
goto err_create_debug_entry;
}
uhci->dentry = dentry;
uhci->fsbr = 0;
uhci->fsbrtimeout = 0;
spin_lock_init(&uhci->lock);
INIT_LIST_HEAD(&uhci->qh_remove_list);
INIT_LIST_HEAD(&uhci->td_remove_list);
INIT_LIST_HEAD(&uhci->urb_remove_list);
INIT_LIST_HEAD(&uhci->urb_list);
INIT_LIST_HEAD(&uhci->complete_list);
INIT_LIST_HEAD(&uhci->idle_qh_list);
init_waitqueue_head(&uhci->waitqh);
if (DEBUG_CONFIGURED) {
dentry = debugfs_create_file(hcd->self.bus_name,
S_IFREG|S_IRUGO|S_IWUSR, uhci_debugfs_root,
uhci, &uhci_debug_operations);
if (!dentry) {
dev_err(uhci_dev(uhci), "couldn't create uhci "
"debugfs entry\n");
retval = -ENOMEM;
goto err_create_debug_entry;
}
uhci->dentry = dentry;
}
uhci->frame = dma_alloc_coherent(uhci_dev(uhci),
UHCI_NUMFRAMES * sizeof(*uhci->frame),
&uhci->frame_dma_handle, 0);
@ -540,7 +552,7 @@ static int uhci_start(struct usb_hcd *hcd)
}
for (i = 0; i < UHCI_NUM_SKELQH; i++) {
uhci->skelqh[i] = uhci_alloc_qh(uhci);
uhci->skelqh[i] = uhci_alloc_qh(uhci, NULL, NULL);
if (!uhci->skelqh[i]) {
dev_err(uhci_dev(uhci), "unable to allocate QH\n");
goto err_alloc_skelqh;
@ -557,13 +569,17 @@ static int uhci_start(struct usb_hcd *hcd)
uhci->skel_int16_qh->link =
uhci->skel_int8_qh->link =
uhci->skel_int4_qh->link =
uhci->skel_int2_qh->link =
cpu_to_le32(uhci->skel_int1_qh->dma_handle) | UHCI_PTR_QH;
uhci->skel_int1_qh->link = cpu_to_le32(uhci->skel_ls_control_qh->dma_handle) | UHCI_PTR_QH;
uhci->skel_int2_qh->link = UHCI_PTR_QH |
cpu_to_le32(uhci->skel_int1_qh->dma_handle);
uhci->skel_ls_control_qh->link = cpu_to_le32(uhci->skel_fs_control_qh->dma_handle) | UHCI_PTR_QH;
uhci->skel_fs_control_qh->link = cpu_to_le32(uhci->skel_bulk_qh->dma_handle) | UHCI_PTR_QH;
uhci->skel_bulk_qh->link = cpu_to_le32(uhci->skel_term_qh->dma_handle) | UHCI_PTR_QH;
uhci->skel_int1_qh->link = UHCI_PTR_QH |
cpu_to_le32(uhci->skel_ls_control_qh->dma_handle);
uhci->skel_ls_control_qh->link = UHCI_PTR_QH |
cpu_to_le32(uhci->skel_fs_control_qh->dma_handle);
uhci->skel_fs_control_qh->link = UHCI_PTR_QH |
cpu_to_le32(uhci->skel_bulk_qh->dma_handle);
uhci->skel_bulk_qh->link = UHCI_PTR_QH |
cpu_to_le32(uhci->skel_term_qh->dma_handle);
/* This dummy TD is to work around a bug in Intel PIIX controllers */
uhci_fill_td(uhci->term_td, 0, uhci_explen(0) |
@ -589,15 +605,15 @@ static int uhci_start(struct usb_hcd *hcd)
/*
* ffs (Find First bit Set) does exactly what we need:
* 1,3,5,... => ffs = 0 => use skel_int2_qh = skelqh[6],
* 2,6,10,... => ffs = 1 => use skel_int4_qh = skelqh[5], etc.
* ffs > 6 => not on any high-period queue, so use
* skel_int1_qh = skelqh[7].
* 1,3,5,... => ffs = 0 => use skel_int2_qh = skelqh[8],
* 2,6,10,... => ffs = 1 => use skel_int4_qh = skelqh[7], etc.
* ffs >= 7 => not on any high-period queue, so use
* skel_int1_qh = skelqh[9].
* Add UHCI_NUMFRAMES to insure at least one bit is set.
*/
irq = 6 - (int) __ffs(i + UHCI_NUMFRAMES);
if (irq < 0)
irq = 7;
irq = 8 - (int) __ffs(i + UHCI_NUMFRAMES);
if (irq <= 1)
irq = 9;
/* Only place we don't use the frame list routines */
uhci->frame[i] = UHCI_PTR_QH |
@ -611,6 +627,7 @@ static int uhci_start(struct usb_hcd *hcd)
mb();
configure_hc(uhci);
uhci->is_initialized = 1;
start_rh(uhci);
return 0;
@ -767,13 +784,30 @@ static int uhci_resume(struct usb_hcd *hcd)
}
#endif
/* Wait until all the URBs for a particular device/endpoint are gone */
/* Wait until a particular device/endpoint's QH is idle, and free it */
static void uhci_hcd_endpoint_disable(struct usb_hcd *hcd,
struct usb_host_endpoint *ep)
struct usb_host_endpoint *hep)
{
struct uhci_hcd *uhci = hcd_to_uhci(hcd);
struct uhci_qh *qh;
wait_event_interruptible(uhci->waitqh, list_empty(&ep->urb_list));
spin_lock_irq(&uhci->lock);
qh = (struct uhci_qh *) hep->hcpriv;
if (qh == NULL)
goto done;
while (qh->state != QH_STATE_IDLE) {
++uhci->num_waiting;
spin_unlock_irq(&uhci->lock);
wait_event_interruptible(uhci->waitqh,
qh->state == QH_STATE_IDLE);
spin_lock_irq(&uhci->lock);
--uhci->num_waiting;
}
uhci_free_qh(uhci, qh);
done:
spin_unlock_irq(&uhci->lock);
}
static int uhci_hcd_get_frame_number(struct usb_hcd *hcd)
@ -857,16 +891,15 @@ static int __init uhci_hcd_init(void)
if (usb_disabled())
return -ENODEV;
if (debug) {
if (DEBUG_CONFIGURED) {
errbuf = kmalloc(ERRBUF_LEN, GFP_KERNEL);
if (!errbuf)
goto errbuf_failed;
uhci_debugfs_root = debugfs_create_dir("uhci", NULL);
if (!uhci_debugfs_root)
goto debug_failed;
}
uhci_debugfs_root = debugfs_create_dir("uhci", NULL);
if (!uhci_debugfs_root)
goto debug_failed;
uhci_up_cachep = kmem_cache_create("uhci_urb_priv",
sizeof(struct urb_priv), 0, 0, NULL, NULL);
if (!uhci_up_cachep)

View File

@ -28,8 +28,9 @@
#define USBSTS_USBINT 0x0001 /* Interrupt due to IOC */
#define USBSTS_ERROR 0x0002 /* Interrupt due to error */
#define USBSTS_RD 0x0004 /* Resume Detect */
#define USBSTS_HSE 0x0008 /* Host System Error - basically PCI problems */
#define USBSTS_HCPE 0x0010 /* Host Controller Process Error - the scripts were buggy */
#define USBSTS_HSE 0x0008 /* Host System Error: PCI problems */
#define USBSTS_HCPE 0x0010 /* Host Controller Process Error:
* the schedule is buggy */
#define USBSTS_HCH 0x0020 /* HC Halted */
/* Interrupt enable register */
@ -47,7 +48,8 @@
/* USB port status and control registers */
#define USBPORTSC1 16
#define USBPORTSC2 18
#define USBPORTSC_CCS 0x0001 /* Current Connect Status ("device present") */
#define USBPORTSC_CCS 0x0001 /* Current Connect Status
* ("device present") */
#define USBPORTSC_CSC 0x0002 /* Connect Status Change */
#define USBPORTSC_PE 0x0004 /* Port Enable */
#define USBPORTSC_PEC 0x0008 /* Port Enable Change */
@ -71,15 +73,16 @@
#define USBLEGSUP_RWC 0x8f00 /* the R/WC bits */
#define USBLEGSUP_RO 0x5040 /* R/O and reserved bits */
#define UHCI_PTR_BITS cpu_to_le32(0x000F)
#define UHCI_PTR_TERM cpu_to_le32(0x0001)
#define UHCI_PTR_QH cpu_to_le32(0x0002)
#define UHCI_PTR_DEPTH cpu_to_le32(0x0004)
#define UHCI_PTR_BREADTH cpu_to_le32(0x0000)
#define UHCI_PTR_BITS __constant_cpu_to_le32(0x000F)
#define UHCI_PTR_TERM __constant_cpu_to_le32(0x0001)
#define UHCI_PTR_QH __constant_cpu_to_le32(0x0002)
#define UHCI_PTR_DEPTH __constant_cpu_to_le32(0x0004)
#define UHCI_PTR_BREADTH __constant_cpu_to_le32(0x0000)
#define UHCI_NUMFRAMES 1024 /* in the frame list [array] */
#define UHCI_MAX_SOF_NUMBER 2047 /* in an SOF packet */
#define CAN_SCHEDULE_FRAMES 1000 /* how far future frames can be scheduled */
#define CAN_SCHEDULE_FRAMES 1000 /* how far in the future frames
* can be scheduled */
/*
@ -87,38 +90,59 @@
*/
/*
* One role of a QH is to hold a queue of TDs for some endpoint. Each QH is
* used with one URB, and qh->element (updated by the HC) is either:
* - the next unprocessed TD for the URB, or
* - UHCI_PTR_TERM (when there's no more traffic for this endpoint), or
* - the QH for the next URB queued to the same endpoint.
* One role of a QH is to hold a queue of TDs for some endpoint. One QH goes
* with each endpoint, and qh->element (updated by the HC) is either:
* - the next unprocessed TD in the endpoint's queue, or
* - UHCI_PTR_TERM (when there's no more traffic for this endpoint).
*
* The other role of a QH is to serve as a "skeleton" framelist entry, so we
* can easily splice a QH for some endpoint into the schedule at the right
* place. Then qh->element is UHCI_PTR_TERM.
*
* In the frame list, qh->link maintains a list of QHs seen by the HC:
* In the schedule, qh->link maintains a list of QHs seen by the HC:
* skel1 --> ep1-qh --> ep2-qh --> ... --> skel2 --> ...
*
* qh->node is the software equivalent of qh->link. The differences
* are that the software list is doubly-linked and QHs in the UNLINKING
* state are on the software list but not the hardware schedule.
*
* For bookkeeping purposes we maintain QHs even for Isochronous endpoints,
* but they never get added to the hardware schedule.
*/
#define QH_STATE_IDLE 1 /* QH is not being used */
#define QH_STATE_UNLINKING 2 /* QH has been removed from the
* schedule but the hardware may
* still be using it */
#define QH_STATE_ACTIVE 3 /* QH is on the schedule */
struct uhci_qh {
/* Hardware fields */
__le32 link; /* Next queue */
__le32 element; /* Queue element pointer */
__le32 link; /* Next QH in the schedule */
__le32 element; /* Queue element (TD) pointer */
/* Software fields */
dma_addr_t dma_handle;
struct urb_priv *urbp;
struct list_head node; /* Node in the list of QHs */
struct usb_host_endpoint *hep; /* Endpoint information */
struct usb_device *udev;
struct list_head queue; /* Queue of urbps for this QH */
struct uhci_qh *skel; /* Skeleton for this QH */
struct uhci_td *dummy_td; /* Dummy TD to end the queue */
struct list_head list;
struct list_head remove_list;
unsigned int unlink_frame; /* When the QH was unlinked */
int state; /* QH_STATE_xxx; see above */
unsigned int initial_toggle:1; /* Endpoint's current toggle value */
unsigned int needs_fixup:1; /* Must fix the TD toggle values */
unsigned int is_stopped:1; /* Queue was stopped by an error */
} __attribute__((aligned(16)));
/*
* We need a special accessor for the element pointer because it is
* subject to asynchronous updates by the controller.
*/
static __le32 inline qh_element(struct uhci_qh *qh) {
static inline __le32 qh_element(struct uhci_qh *qh) {
__le32 element = qh->element;
barrier();
@ -149,11 +173,13 @@ static __le32 inline qh_element(struct uhci_qh *qh) {
#define TD_CTRL_ACTLEN_MASK 0x7FF /* actual length, encoded as n - 1 */
#define TD_CTRL_ANY_ERROR (TD_CTRL_STALLED | TD_CTRL_DBUFERR | \
TD_CTRL_BABBLE | TD_CTRL_CRCTIME | TD_CTRL_BITSTUFF)
TD_CTRL_BABBLE | TD_CTRL_CRCTIME | \
TD_CTRL_BITSTUFF)
#define uhci_maxerr(err) ((err) << TD_CTRL_C_ERR_SHIFT)
#define uhci_status_bits(ctrl_sts) ((ctrl_sts) & 0xF60000)
#define uhci_actual_length(ctrl_sts) (((ctrl_sts) + 1) & TD_CTRL_ACTLEN_MASK) /* 1-based */
#define uhci_actual_length(ctrl_sts) (((ctrl_sts) + 1) & \
TD_CTRL_ACTLEN_MASK) /* 1-based */
/*
* for TD <info>: (a.k.a. Token)
@ -163,7 +189,7 @@ static __le32 inline qh_element(struct uhci_qh *qh) {
#define TD_TOKEN_TOGGLE_SHIFT 19
#define TD_TOKEN_TOGGLE (1 << 19)
#define TD_TOKEN_EXPLEN_SHIFT 21
#define TD_TOKEN_EXPLEN_MASK 0x7FF /* expected length, encoded as n - 1 */
#define TD_TOKEN_EXPLEN_MASK 0x7FF /* expected length, encoded as n-1 */
#define TD_TOKEN_PID_MASK 0xFF
#define uhci_explen(len) ((((len) - 1) & TD_TOKEN_EXPLEN_MASK) << \
@ -187,7 +213,7 @@ static __le32 inline qh_element(struct uhci_qh *qh) {
* sw space after the TD entry.
*
* td->link points to either another TD (not necessarily for the same urb or
* even the same endpoint), or nothing (PTR_TERM), or a QH (for queued urbs).
* even the same endpoint), or nothing (PTR_TERM), or a QH.
*/
struct uhci_td {
/* Hardware fields */
@ -210,7 +236,7 @@ struct uhci_td {
* We need a special accessor for the control/status word because it is
* subject to asynchronous updates by the controller.
*/
static u32 inline td_status(struct uhci_td *td) {
static inline u32 td_status(struct uhci_td *td) {
__le32 status = td->status;
barrier();
@ -223,17 +249,14 @@ static u32 inline td_status(struct uhci_td *td) {
*/
/*
* The UHCI driver places Interrupt, Control and Bulk into QHs both
* to group together TDs for one transfer, and also to facilitate queuing
* of URBs. To make it easy to insert entries into the schedule, we have
* a skeleton of QHs for each predefined Interrupt latency, low-speed
* control, full-speed control and terminating QH (see explanation for
* the terminating QH below).
* The UHCI driver uses QHs with Interrupt, Control and Bulk URBs for
* automatic queuing. To make it easy to insert entries into the schedule,
* we have a skeleton of QHs for each predefined Interrupt latency,
* low-speed control, full-speed control, bulk, and terminating QH
* (see explanation for the terminating QH below).
*
* When we want to add a new QH, we add it to the end of the list for the
* skeleton QH.
*
* For instance, the queue can look like this:
* skeleton QH. For instance, the schedule list can look like this:
*
* skel int128 QH
* dev 1 interrupt QH
@ -256,26 +279,31 @@ static u32 inline td_status(struct uhci_td *td) {
* - To loop back to the full-speed control queue for full-speed bandwidth
* reclamation.
*
* Isochronous transfers are stored before the start of the skeleton
* schedule and don't use QHs. While the UHCI spec doesn't forbid the
* use of QHs for Isochronous, it doesn't use them either. And the spec
* says that queues never advance on an error completion status, which
* makes them totally unsuitable for Isochronous transfers.
* There's a special skeleton QH for Isochronous QHs. It never appears
* on the schedule, and Isochronous TDs go on the schedule before the
* the skeleton QHs. The hardware accesses them directly rather than
* through their QH, which is used only for bookkeeping purposes.
* While the UHCI spec doesn't forbid the use of QHs for Isochronous,
* it doesn't use them either. And the spec says that queues never
* advance on an error completion status, which makes them totally
* unsuitable for Isochronous transfers.
*/
#define UHCI_NUM_SKELQH 12
#define skel_int128_qh skelqh[0]
#define skel_int64_qh skelqh[1]
#define skel_int32_qh skelqh[2]
#define skel_int16_qh skelqh[3]
#define skel_int8_qh skelqh[4]
#define skel_int4_qh skelqh[5]
#define skel_int2_qh skelqh[6]
#define skel_int1_qh skelqh[7]
#define skel_ls_control_qh skelqh[8]
#define skel_fs_control_qh skelqh[9]
#define skel_bulk_qh skelqh[10]
#define skel_term_qh skelqh[11]
#define UHCI_NUM_SKELQH 14
#define skel_unlink_qh skelqh[0]
#define skel_iso_qh skelqh[1]
#define skel_int128_qh skelqh[2]
#define skel_int64_qh skelqh[3]
#define skel_int32_qh skelqh[4]
#define skel_int16_qh skelqh[5]
#define skel_int8_qh skelqh[6]
#define skel_int4_qh skelqh[7]
#define skel_int2_qh skelqh[8]
#define skel_int1_qh skelqh[9]
#define skel_ls_control_qh skelqh[10]
#define skel_fs_control_qh skelqh[11]
#define skel_bulk_qh skelqh[12]
#define skel_term_qh skelqh[13]
/*
* Search tree for determining where <interval> fits in the skelqh[]
@ -293,21 +321,21 @@ static inline int __interval_to_skel(int interval)
if (interval < 16) {
if (interval < 4) {
if (interval < 2)
return 7; /* int1 for 0-1 ms */
return 6; /* int2 for 2-3 ms */
return 9; /* int1 for 0-1 ms */
return 8; /* int2 for 2-3 ms */
}
if (interval < 8)
return 5; /* int4 for 4-7 ms */
return 4; /* int8 for 8-15 ms */
return 7; /* int4 for 4-7 ms */
return 6; /* int8 for 8-15 ms */
}
if (interval < 64) {
if (interval < 32)
return 3; /* int16 for 16-31 ms */
return 2; /* int32 for 32-63 ms */
return 5; /* int16 for 16-31 ms */
return 4; /* int32 for 32-63 ms */
}
if (interval < 128)
return 1; /* int64 for 64-127 ms */
return 0; /* int128 for 128-255 ms (Max.) */
return 3; /* int64 for 64-127 ms */
return 2; /* int128 for 128-255 ms (Max.) */
}
@ -360,15 +388,16 @@ struct uhci_hcd {
struct uhci_td *term_td; /* Terminating TD, see UHCI bug */
struct uhci_qh *skelqh[UHCI_NUM_SKELQH]; /* Skeleton QHs */
struct uhci_qh *next_qh; /* Next QH to scan */
spinlock_t lock;
dma_addr_t frame_dma_handle; /* Hardware frame list */
dma_addr_t frame_dma_handle; /* Hardware frame list */
__le32 *frame;
void **frame_cpu; /* CPU's frame list */
void **frame_cpu; /* CPU's frame list */
int fsbr; /* Full-speed bandwidth reclamation */
unsigned long fsbrtimeout; /* FSBR delay */
int fsbr; /* Full-speed bandwidth reclamation */
unsigned long fsbrtimeout; /* FSBR delay */
enum uhci_rh_state rh_state;
unsigned long auto_stop_time; /* When to AUTO_STOP */
@ -382,6 +411,7 @@ struct uhci_hcd {
unsigned int hc_inaccessible:1; /* HC is suspended or dead */
unsigned int working_RD:1; /* Suspended root hub doesn't
need to be polled */
unsigned int is_initialized:1; /* Data structure is usable */
/* Support for port suspend/resume/reset */
unsigned long port_c_suspend; /* Bit-arrays of ports */
@ -389,27 +419,16 @@ struct uhci_hcd {
unsigned long resuming_ports;
unsigned long ports_timeout; /* Time to stop signalling */
/* Main list of URBs currently controlled by this HC */
struct list_head urb_list;
/* List of QHs that are done, but waiting to be unlinked (race) */
struct list_head qh_remove_list;
unsigned int qh_remove_age; /* Age in frames */
/* List of TDs that are done, but waiting to be freed (race) */
struct list_head td_remove_list;
unsigned int td_remove_age; /* Age in frames */
/* List of asynchronously unlinked URBs */
struct list_head urb_remove_list;
unsigned int urb_remove_age; /* Age in frames */
/* List of URBs awaiting completion callback */
struct list_head complete_list;
struct list_head idle_qh_list; /* Where the idle QHs live */
int rh_numports; /* Number of root-hub ports */
wait_queue_head_t waitqh; /* endpoint_disable waiters */
int num_waiting; /* Number of waiters */
};
/* Convert between a usb_hcd pointer and the corresponding uhci_hcd */
@ -429,7 +448,7 @@ static inline struct usb_hcd *uhci_to_hcd(struct uhci_hcd *uhci)
* Private per-URB data
*/
struct urb_priv {
struct list_head urb_list;
struct list_head node; /* Node in the QH's urbp list */
struct urb *urb;
@ -437,15 +456,8 @@ struct urb_priv {
struct list_head td_list;
unsigned fsbr : 1; /* URB turned on FSBR */
unsigned fsbr_timeout : 1; /* URB timed out on FSBR */
unsigned queued : 1; /* QH was queued (not linked in) */
unsigned short_control_packet : 1; /* If we get a short packet during */
/* a control transfer, retrigger */
/* the status phase */
unsigned long fsbrtime; /* In jiffies */
struct list_head queue_list;
unsigned short_transfer : 1; /* URB got a short transfer, no
* need to rescan */
};

View File

@ -99,6 +99,21 @@ static void uhci_finish_suspend(struct uhci_hcd *uhci, int port,
}
}
/* Wait for the UHCI controller in HP's iLO2 server management chip.
* It can take up to 250 us to finish a reset and set the CSC bit.
*/
static void wait_for_HP(unsigned long port_addr)
{
int i;
for (i = 10; i < 250; i += 10) {
if (inw(port_addr) & USBPORTSC_CSC)
return;
udelay(10);
}
/* Log a warning? */
}
static void uhci_check_ports(struct uhci_hcd *uhci)
{
unsigned int port;
@ -113,6 +128,12 @@ static void uhci_check_ports(struct uhci_hcd *uhci)
CLR_RH_PORTSTAT(USBPORTSC_PR);
udelay(10);
/* HP's server management chip requires
* a longer delay. */
if (to_pci_dev(uhci_dev(uhci))->vendor ==
PCI_VENDOR_ID_HP)
wait_for_HP(port_addr);
/* If the port was enabled before, turning
* reset on caused a port enable change.
* Turning reset off causes a port connect

File diff suppressed because it is too large Load Diff

View File

@ -96,6 +96,7 @@
#include <linux/module.h>
#include <linux/smp_lock.h>
#include <linux/wait.h>
#include <linux/mutex.h>
#include <linux/usb.h>
#include <linux/fs.h>
@ -169,7 +170,7 @@ struct mdc800_data
int out_count; // Bytes in the buffer
int open; // Camera device open ?
struct semaphore io_lock; // IO -lock
struct mutex io_lock; // IO -lock
char in [8]; // Command Input Buffer
int in_count;
@ -497,7 +498,7 @@ static int mdc800_usb_probe (struct usb_interface *intf,
info ("Found Mustek MDC800 on USB.");
down (&mdc800->io_lock);
mutex_lock(&mdc800->io_lock);
retval = usb_register_dev(intf, &mdc800_class);
if (retval) {
@ -542,7 +543,7 @@ static int mdc800_usb_probe (struct usb_interface *intf,
mdc800->state=READY;
up (&mdc800->io_lock);
mutex_unlock(&mdc800->io_lock);
usb_set_intfdata(intf, mdc800);
return 0;
@ -620,7 +621,7 @@ static int mdc800_device_open (struct inode* inode, struct file *file)
int retval=0;
int errn=0;
down (&mdc800->io_lock);
mutex_lock(&mdc800->io_lock);
if (mdc800->state == NOT_CONNECTED)
{
@ -656,7 +657,7 @@ static int mdc800_device_open (struct inode* inode, struct file *file)
dbg ("Mustek MDC800 device opened.");
error_out:
up (&mdc800->io_lock);
mutex_unlock(&mdc800->io_lock);
return errn;
}
@ -669,7 +670,7 @@ static int mdc800_device_release (struct inode* inode, struct file *file)
int retval=0;
dbg ("Mustek MDC800 device closed.");
down (&mdc800->io_lock);
mutex_lock(&mdc800->io_lock);
if (mdc800->open && (mdc800->state != NOT_CONNECTED))
{
usb_kill_urb(mdc800->irq_urb);
@ -682,7 +683,7 @@ static int mdc800_device_release (struct inode* inode, struct file *file)
retval=-EIO;
}
up(&mdc800->io_lock);
mutex_unlock(&mdc800->io_lock);
return retval;
}
@ -695,21 +696,21 @@ static ssize_t mdc800_device_read (struct file *file, char __user *buf, size_t l
size_t left=len, sts=len; /* single transfer size */
char __user *ptr = buf;
down (&mdc800->io_lock);
mutex_lock(&mdc800->io_lock);
if (mdc800->state == NOT_CONNECTED)
{
up (&mdc800->io_lock);
mutex_unlock(&mdc800->io_lock);
return -EBUSY;
}
if (mdc800->state == WORKING)
{
warn ("Illegal State \"working\" reached during read ?!");
up (&mdc800->io_lock);
mutex_unlock(&mdc800->io_lock);
return -EBUSY;
}
if (!mdc800->open)
{
up (&mdc800->io_lock);
mutex_unlock(&mdc800->io_lock);
return -EBUSY;
}
@ -717,7 +718,7 @@ static ssize_t mdc800_device_read (struct file *file, char __user *buf, size_t l
{
if (signal_pending (current))
{
up (&mdc800->io_lock);
mutex_unlock(&mdc800->io_lock);
return -EINTR;
}
@ -736,7 +737,7 @@ static ssize_t mdc800_device_read (struct file *file, char __user *buf, size_t l
if (usb_submit_urb (mdc800->download_urb, GFP_KERNEL))
{
err ("Can't submit download urb (status=%i)",mdc800->download_urb->status);
up (&mdc800->io_lock);
mutex_unlock(&mdc800->io_lock);
return len-left;
}
wait_event_timeout(mdc800->download_wait, mdc800->downloaded,
@ -745,14 +746,14 @@ static ssize_t mdc800_device_read (struct file *file, char __user *buf, size_t l
if (mdc800->download_urb->status != 0)
{
err ("request download-bytes fails (status=%i)",mdc800->download_urb->status);
up (&mdc800->io_lock);
mutex_unlock(&mdc800->io_lock);
return len-left;
}
}
else
{
/* No more bytes -> that's an error*/
up (&mdc800->io_lock);
mutex_unlock(&mdc800->io_lock);
return -EIO;
}
}
@ -761,7 +762,7 @@ static ssize_t mdc800_device_read (struct file *file, char __user *buf, size_t l
/* Copy Bytes */
if (copy_to_user(ptr, &mdc800->out [mdc800->out_ptr],
sts)) {
up(&mdc800->io_lock);
mutex_unlock(&mdc800->io_lock);
return -EFAULT;
}
ptr+=sts;
@ -770,7 +771,7 @@ static ssize_t mdc800_device_read (struct file *file, char __user *buf, size_t l
}
}
up (&mdc800->io_lock);
mutex_unlock(&mdc800->io_lock);
return len-left;
}
@ -785,15 +786,15 @@ static ssize_t mdc800_device_write (struct file *file, const char __user *buf, s
{
size_t i=0;
down (&mdc800->io_lock);
mutex_lock(&mdc800->io_lock);
if (mdc800->state != READY)
{
up (&mdc800->io_lock);
mutex_unlock(&mdc800->io_lock);
return -EBUSY;
}
if (!mdc800->open )
{
up (&mdc800->io_lock);
mutex_unlock(&mdc800->io_lock);
return -EBUSY;
}
@ -802,13 +803,13 @@ static ssize_t mdc800_device_write (struct file *file, const char __user *buf, s
unsigned char c;
if (signal_pending (current))
{
up (&mdc800->io_lock);
mutex_unlock(&mdc800->io_lock);
return -EINTR;
}
if(get_user(c, buf+i))
{
up(&mdc800->io_lock);
mutex_unlock(&mdc800->io_lock);
return -EFAULT;
}
@ -829,7 +830,7 @@ static ssize_t mdc800_device_write (struct file *file, const char __user *buf, s
}
else
{
up (&mdc800->io_lock);
mutex_unlock(&mdc800->io_lock);
return -EIO;
}
@ -841,7 +842,7 @@ static ssize_t mdc800_device_write (struct file *file, const char __user *buf, s
if (mdc800_usb_waitForIRQ (0,TO_GET_READY))
{
err ("Camera didn't get ready.\n");
up (&mdc800->io_lock);
mutex_unlock(&mdc800->io_lock);
return -EIO;
}
@ -853,7 +854,7 @@ static ssize_t mdc800_device_write (struct file *file, const char __user *buf, s
if (usb_submit_urb (mdc800->write_urb, GFP_KERNEL))
{
err ("submitting write urb fails (status=%i)", mdc800->write_urb->status);
up (&mdc800->io_lock);
mutex_unlock(&mdc800->io_lock);
return -EIO;
}
wait_event_timeout(mdc800->write_wait, mdc800->written, TO_WRITE_GET_READY*HZ/1000);
@ -861,7 +862,7 @@ static ssize_t mdc800_device_write (struct file *file, const char __user *buf, s
if (mdc800->state == WORKING)
{
usb_kill_urb(mdc800->write_urb);
up (&mdc800->io_lock);
mutex_unlock(&mdc800->io_lock);
return -EIO;
}
@ -873,7 +874,7 @@ static ssize_t mdc800_device_write (struct file *file, const char __user *buf, s
{
err ("call 0x07 before 0x05,0x3e");
mdc800->state=READY;
up (&mdc800->io_lock);
mutex_unlock(&mdc800->io_lock);
return -EIO;
}
mdc800->pic_len=-1;
@ -892,7 +893,7 @@ static ssize_t mdc800_device_write (struct file *file, const char __user *buf, s
if (mdc800_usb_waitForIRQ (1,TO_READ_FROM_IRQ))
{
err ("requesting answer from irq fails");
up (&mdc800->io_lock);
mutex_unlock(&mdc800->io_lock);
return -EIO;
}
@ -920,7 +921,7 @@ static ssize_t mdc800_device_write (struct file *file, const char __user *buf, s
if (mdc800_usb_waitForIRQ (0,TO_DEFAULT_COMMAND))
{
err ("Command Timeout.");
up (&mdc800->io_lock);
mutex_unlock(&mdc800->io_lock);
return -EIO;
}
}
@ -930,7 +931,7 @@ static ssize_t mdc800_device_write (struct file *file, const char __user *buf, s
}
i++;
}
up (&mdc800->io_lock);
mutex_unlock(&mdc800->io_lock);
return i;
}
@ -978,15 +979,13 @@ static int __init usb_mdc800_init (void)
{
int retval = -ENODEV;
/* Allocate Memory */
mdc800=kmalloc (sizeof (struct mdc800_data), GFP_KERNEL);
mdc800=kzalloc (sizeof (struct mdc800_data), GFP_KERNEL);
if (!mdc800)
goto cleanup_on_fail;
memset(mdc800, 0, sizeof(struct mdc800_data));
mdc800->dev = NULL;
mdc800->open=0;
mdc800->state=NOT_CONNECTED;
init_MUTEX (&mdc800->io_lock);
mutex_init (&mdc800->io_lock);
init_waitqueue_head (&mdc800->irq_wait);
init_waitqueue_head (&mdc800->write_wait);

View File

@ -159,8 +159,6 @@ static const char accel[] = { 1, 2, 4, 6, 9, 13, 20 };
*/
#define FILTER_TIME (HZ / 20)
static DECLARE_MUTEX(disconnect_sem);
struct ati_remote {
struct input_dev *idev;
struct usb_device *udev;

View File

@ -66,9 +66,8 @@ static struct hid_report *hid_register_report(struct hid_device *device, unsigne
if (report_enum->report_id_hash[id])
return report_enum->report_id_hash[id];
if (!(report = kmalloc(sizeof(struct hid_report), GFP_KERNEL)))
if (!(report = kzalloc(sizeof(struct hid_report), GFP_KERNEL)))
return NULL;
memset(report, 0, sizeof(struct hid_report));
if (id != 0)
report_enum->numbered = 1;
@ -97,12 +96,9 @@ static struct hid_field *hid_register_field(struct hid_report *report, unsigned
return NULL;
}
if (!(field = kmalloc(sizeof(struct hid_field) + usages * sizeof(struct hid_usage)
if (!(field = kzalloc(sizeof(struct hid_field) + usages * sizeof(struct hid_usage)
+ values * sizeof(unsigned), GFP_KERNEL))) return NULL;
memset(field, 0, sizeof(struct hid_field) + usages * sizeof(struct hid_usage)
+ values * sizeof(unsigned));
field->index = report->maxfield++;
report->field[field->index] = field;
field->usage = (struct hid_usage *)(field + 1);
@ -651,17 +647,14 @@ static struct hid_device *hid_parse_report(__u8 *start, unsigned size)
hid_parser_reserved
};
if (!(device = kmalloc(sizeof(struct hid_device), GFP_KERNEL)))
if (!(device = kzalloc(sizeof(struct hid_device), GFP_KERNEL)))
return NULL;
memset(device, 0, sizeof(struct hid_device));
if (!(device->collection = kmalloc(sizeof(struct hid_collection) *
if (!(device->collection = kzalloc(sizeof(struct hid_collection) *
HID_DEFAULT_NUM_COLLECTIONS, GFP_KERNEL))) {
kfree(device);
return NULL;
}
memset(device->collection, 0, sizeof(struct hid_collection) *
HID_DEFAULT_NUM_COLLECTIONS);
device->collection_size = HID_DEFAULT_NUM_COLLECTIONS;
for (i = 0; i < HID_REPORT_TYPES; i++)
@ -675,13 +668,12 @@ static struct hid_device *hid_parse_report(__u8 *start, unsigned size)
memcpy(device->rdesc, start, size);
device->rsize = size;
if (!(parser = kmalloc(sizeof(struct hid_parser), GFP_KERNEL))) {
if (!(parser = kzalloc(sizeof(struct hid_parser), GFP_KERNEL))) {
kfree(device->rdesc);
kfree(device->collection);
kfree(device);
return NULL;
}
memset(parser, 0, sizeof(struct hid_parser));
parser->device = device;
end = start + size;
@ -910,6 +902,99 @@ static int hid_input_report(int type, struct urb *urb, int interrupt, struct pt_
return 0;
}
/*
* Input submission and I/O error handler.
*/
static void hid_io_error(struct hid_device *hid);
/* Start up the input URB */
static int hid_start_in(struct hid_device *hid)
{
unsigned long flags;
int rc = 0;
spin_lock_irqsave(&hid->inlock, flags);
if (hid->open > 0 && !test_bit(HID_SUSPENDED, &hid->iofl) &&
!test_and_set_bit(HID_IN_RUNNING, &hid->iofl)) {
rc = usb_submit_urb(hid->urbin, GFP_ATOMIC);
if (rc != 0)
clear_bit(HID_IN_RUNNING, &hid->iofl);
}
spin_unlock_irqrestore(&hid->inlock, flags);
return rc;
}
/* I/O retry timer routine */
static void hid_retry_timeout(unsigned long _hid)
{
struct hid_device *hid = (struct hid_device *) _hid;
dev_dbg(&hid->intf->dev, "retrying intr urb\n");
if (hid_start_in(hid))
hid_io_error(hid);
}
/* Workqueue routine to reset the device */
static void hid_reset(void *_hid)
{
struct hid_device *hid = (struct hid_device *) _hid;
int rc_lock, rc;
dev_dbg(&hid->intf->dev, "resetting device\n");
rc = rc_lock = usb_lock_device_for_reset(hid->dev, hid->intf);
if (rc_lock >= 0) {
rc = usb_reset_device(hid->dev);
if (rc_lock)
usb_unlock_device(hid->dev);
}
clear_bit(HID_RESET_PENDING, &hid->iofl);
if (rc == 0) {
hid->retry_delay = 0;
if (hid_start_in(hid))
hid_io_error(hid);
} else if (!(rc == -ENODEV || rc == -EHOSTUNREACH || rc == -EINTR))
err("can't reset device, %s-%s/input%d, status %d",
hid->dev->bus->bus_name,
hid->dev->devpath,
hid->ifnum, rc);
}
/* Main I/O error handler */
static void hid_io_error(struct hid_device *hid)
{
unsigned long flags;
spin_lock_irqsave(&hid->inlock, flags);
/* Stop when disconnected */
if (usb_get_intfdata(hid->intf) == NULL)
goto done;
/* When an error occurs, retry at increasing intervals */
if (hid->retry_delay == 0) {
hid->retry_delay = 13; /* Then 26, 52, 104, 104, ... */
hid->stop_retry = jiffies + msecs_to_jiffies(1000);
} else if (hid->retry_delay < 100)
hid->retry_delay *= 2;
if (time_after(jiffies, hid->stop_retry)) {
/* Retries failed, so do a port reset */
if (!test_and_set_bit(HID_RESET_PENDING, &hid->iofl)) {
if (schedule_work(&hid->reset_work))
goto done;
clear_bit(HID_RESET_PENDING, &hid->iofl);
}
}
mod_timer(&hid->io_retry,
jiffies + msecs_to_jiffies(hid->retry_delay));
done:
spin_unlock_irqrestore(&hid->inlock, flags);
}
/*
* Input interrupt completion handler.
*/
@ -921,25 +1006,35 @@ static void hid_irq_in(struct urb *urb, struct pt_regs *regs)
switch (urb->status) {
case 0: /* success */
hid->retry_delay = 0;
hid_input_report(HID_INPUT_REPORT, urb, 1, regs);
break;
case -ECONNRESET: /* unlink */
case -ENOENT:
case -EPERM:
case -ESHUTDOWN: /* unplug */
case -EILSEQ: /* unplug timeout on uhci */
clear_bit(HID_IN_RUNNING, &hid->iofl);
return;
case -EILSEQ: /* protocol error or unplug */
case -EPROTO: /* protocol error or unplug */
case -ETIMEDOUT: /* NAK */
break;
clear_bit(HID_IN_RUNNING, &hid->iofl);
hid_io_error(hid);
return;
default: /* error */
warn("input irq status %d received", urb->status);
}
status = usb_submit_urb(urb, SLAB_ATOMIC);
if (status)
err("can't resubmit intr, %s-%s/input%d, status %d",
hid->dev->bus->bus_name, hid->dev->devpath,
hid->ifnum, status);
if (status) {
clear_bit(HID_IN_RUNNING, &hid->iofl);
if (status != -EPERM) {
err("can't resubmit intr, %s-%s/input%d, status %d",
hid->dev->bus->bus_name,
hid->dev->devpath,
hid->ifnum, status);
hid_io_error(hid);
}
}
}
/*
@ -1101,8 +1196,9 @@ static void hid_irq_out(struct urb *urb, struct pt_regs *regs)
case 0: /* success */
break;
case -ESHUTDOWN: /* unplug */
case -EILSEQ: /* unplug timeout on uhci */
unplug = 1;
case -EILSEQ: /* protocol error or unplug */
case -EPROTO: /* protocol error or unplug */
case -ECONNRESET: /* unlink */
case -ENOENT:
break;
@ -1149,8 +1245,9 @@ static void hid_ctrl(struct urb *urb, struct pt_regs *regs)
hid_input_report(hid->ctrl[hid->ctrltail].report->type, urb, 0, regs);
break;
case -ESHUTDOWN: /* unplug */
case -EILSEQ: /* unplug timectrl on uhci */
unplug = 1;
case -EILSEQ: /* protocol error or unplug */
case -EPROTO: /* protocol error or unplug */
case -ECONNRESET: /* unlink */
case -ENOENT:
case -EPIPE: /* report not available */
@ -1263,14 +1360,9 @@ static int hid_get_class_descriptor(struct usb_device *dev, int ifnum,
int hid_open(struct hid_device *hid)
{
if (hid->open++)
return 0;
hid->urbin->dev = hid->dev;
if (usb_submit_urb(hid->urbin, GFP_KERNEL))
return -EIO;
++hid->open;
if (hid_start_in(hid))
hid_io_error(hid);
return 0;
}
@ -1460,6 +1552,9 @@ void hid_init_reports(struct hid_device *hid)
#define USB_VENDOR_ID_HP 0x03f0
#define USB_DEVICE_ID_HP_USBHUB_KB 0x020c
#define USB_VENDOR_ID_CREATIVELABS 0x062a
#define USB_DEVICE_ID_CREATIVELABS_SILVERCREST 0x0201
/*
* Alphabetically sorted blacklist by quirk type.
*/
@ -1576,6 +1671,7 @@ static const struct hid_blacklist {
{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_4PORTKVMC, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_BTC, USB_DEVICE_ID_BTC_KEYBOARD, HID_QUIRK_NOGET},
{ USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_USBHUB_KB, HID_QUIRK_NOGET},
{ USB_VENDOR_ID_CREATIVELABS, USB_DEVICE_ID_CREATIVELABS_SILVERCREST, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_HP, USB_DEVICE_ID_HP_USBHUB_KB, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_TANGTOP, USB_DEVICE_ID_TANGTOP_USBPS2, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_DUAL_USB_JOYPAD, HID_QUIRK_NOGET | HID_QUIRK_MULTI_INPUT },
@ -1795,6 +1891,10 @@ static struct hid_device *usb_hid_configure(struct usb_interface *intf)
init_waitqueue_head(&hid->wait);
INIT_WORK(&hid->reset_work, hid_reset, hid);
setup_timer(&hid->io_retry, hid_retry_timeout, (unsigned long) hid);
spin_lock_init(&hid->inlock);
spin_lock_init(&hid->outlock);
spin_lock_init(&hid->ctrllock);
@ -1863,11 +1963,16 @@ static void hid_disconnect(struct usb_interface *intf)
if (!hid)
return;
spin_lock_irq(&hid->inlock); /* Sync with error handler */
usb_set_intfdata(intf, NULL);
spin_unlock_irq(&hid->inlock);
usb_kill_urb(hid->urbin);
usb_kill_urb(hid->urbout);
usb_kill_urb(hid->urbctrl);
del_timer_sync(&hid->io_retry);
flush_scheduled_work();
if (hid->claimed & HID_CLAIMED_INPUT)
hidinput_disconnect(hid);
if (hid->claimed & HID_CLAIMED_HIDDEV)
@ -1942,6 +2047,10 @@ static int hid_suspend(struct usb_interface *intf, pm_message_t message)
{
struct hid_device *hid = usb_get_intfdata (intf);
spin_lock_irq(&hid->inlock); /* Sync with error handler */
set_bit(HID_SUSPENDED, &hid->iofl);
spin_unlock_irq(&hid->inlock);
del_timer(&hid->io_retry);
usb_kill_urb(hid->urbin);
dev_dbg(&intf->dev, "suspend\n");
return 0;
@ -1952,10 +2061,8 @@ static int hid_resume(struct usb_interface *intf)
struct hid_device *hid = usb_get_intfdata (intf);
int status;
if (hid->open)
status = usb_submit_urb(hid->urbin, GFP_NOIO);
else
status = 0;
clear_bit(HID_SUSPENDED, &hid->iofl);
status = hid_start_in(hid);
dev_dbg(&intf->dev, "resume status %d\n", status);
return status;
}

View File

@ -154,10 +154,9 @@ int hid_lgff_init(struct hid_device* hid)
return -1;
}
private = kmalloc(sizeof(struct lgff_device), GFP_KERNEL);
private = kzalloc(sizeof(struct lgff_device), GFP_KERNEL);
if (!private)
return -1;
memset(private, 0, sizeof(struct lgff_device));
hid->ff_private = private;
/* Input init */
@ -228,13 +227,12 @@ static struct hid_report* hid_lgff_duplicate_report(struct hid_report* report)
}
*ret->field[0] = *report->field[0];
ret->field[0]->value = kmalloc(sizeof(s32[8]), GFP_KERNEL);
ret->field[0]->value = kzalloc(sizeof(s32[8]), GFP_KERNEL);
if (!ret->field[0]->value) {
kfree(ret->field[0]);
kfree(ret);
return NULL;
}
memset(ret->field[0]->value, 0, sizeof(s32[8]));
return ret;
}

View File

@ -113,11 +113,10 @@ int hid_tmff_init(struct hid_device *hid)
struct hid_input *hidinput = list_entry(hid->inputs.next, struct hid_input, list);
struct input_dev *input_dev = hidinput->input;
private = kmalloc(sizeof(struct tmff_device), GFP_KERNEL);
private = kzalloc(sizeof(struct tmff_device), GFP_KERNEL);
if (!private)
return -ENOMEM;
memset(private, 0, sizeof(struct tmff_device));
hid->ff_private = private;
/* Find the report to use */

View File

@ -31,6 +31,8 @@
#include <linux/types.h>
#include <linux/slab.h>
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/workqueue.h>
/*
* USB HID (Human Interface Device) interface class code
@ -370,6 +372,9 @@ struct hid_control_fifo {
#define HID_CTRL_RUNNING 1
#define HID_OUT_RUNNING 2
#define HID_IN_RUNNING 3
#define HID_RESET_PENDING 4
#define HID_SUSPENDED 5
struct hid_input {
struct list_head list;
@ -393,12 +398,17 @@ struct hid_device { /* device report descriptor */
int ifnum; /* USB interface number */
unsigned long iofl; /* I/O flags (CTRL_RUNNING, OUT_RUNNING) */
struct timer_list io_retry; /* Retry timer */
unsigned long stop_retry; /* Time to give up, in jiffies */
unsigned int retry_delay; /* Delay length in ms */
struct work_struct reset_work; /* Task context for resets */
unsigned int bufsize; /* URB buffer size */
struct urb *urbin; /* Input URB */
char *inbuf; /* Input buffer */
dma_addr_t inbuf_dma; /* Input buffer dma */
spinlock_t inlock; /* Input fifo spinlock */
struct urb *urbctrl; /* Control URB */
struct usb_ctrlrequest *cr; /* Control request struct */

View File

@ -257,9 +257,8 @@ static int hiddev_open(struct inode * inode, struct file * file) {
if (i >= HIDDEV_MINORS || !hiddev_table[i])
return -ENODEV;
if (!(list = kmalloc(sizeof(struct hiddev_list), GFP_KERNEL)))
if (!(list = kzalloc(sizeof(struct hiddev_list), GFP_KERNEL)))
return -ENOMEM;
memset(list, 0, sizeof(struct hiddev_list));
list->hiddev = hiddev_table[i];
list->next = hiddev_table[i]->list;
@ -754,9 +753,8 @@ int hiddev_connect(struct hid_device *hid)
if (i == hid->maxcollection && (hid->quirks & HID_QUIRK_HIDDEV) == 0)
return -1;
if (!(hiddev = kmalloc(sizeof(struct hiddev), GFP_KERNEL)))
if (!(hiddev = kzalloc(sizeof(struct hiddev), GFP_KERNEL)))
return -1;
memset(hiddev, 0, sizeof(struct hiddev));
retval = usb_register_dev(hid->intf, &hiddev_class);
if (retval) {

View File

@ -191,6 +191,21 @@ config USB_W9968CF
To compile this driver as a module, choose M here: the
module will be called w9968cf.
config USB_ZC0301
tristate "USB ZC0301 Image Processor and Control Chip support"
depends on USB && VIDEO_DEV
---help---
Say Y here if you want support for cameras based on the ZC0301
Image Processor and Control Chip.
See <file:Documentation/usb/zc0301.txt> for more informations.
This driver uses the Video For Linux API. You must say Y or M to
"Video For Linux" to use this driver.
To compile this driver as a module, choose M here: the
module will be called zc0301.
config USB_PWC
tristate "USB Philips Cameras"
depends on USB && VIDEO_DEV

View File

@ -2,8 +2,12 @@
# Makefile for USB Media drivers
#
sn9c102-objs := sn9c102_core.o sn9c102_hv7131d.o sn9c102_mi0343.o sn9c102_ov7630.o sn9c102_pas106b.o sn9c102_pas202bcb.o sn9c102_tas5110c1b.o sn9c102_tas5130d1b.o
sn9c102-objs := sn9c102_core.o sn9c102_hv7131d.o sn9c102_mi0343.o \
sn9c102_ov7630.o sn9c102_pas106b.o sn9c102_pas202bca.o \
sn9c102_pas202bcb.o sn9c102_tas5110c1b.o \
sn9c102_tas5130d1b.o
et61x251-objs := et61x251_core.o et61x251_tas5130d1b.o
zc0301-objs := zc0301_core.o zc0301_pas202bcb.o
obj-$(CONFIG_USB_DABUSB) += dabusb.o
obj-$(CONFIG_USB_DSBR) += dsbr100.o
@ -16,4 +20,5 @@ obj-$(CONFIG_USB_SN9C102) += sn9c102.o
obj-$(CONFIG_USB_STV680) += stv680.o
obj-$(CONFIG_USB_VICAM) += vicam.o usbvideo.o
obj-$(CONFIG_USB_W9968CF) += w9968cf.o
obj-$(CONFIG_USB_ZC0301) += zc0301.o
obj-$(CONFIG_USB_PWC) += pwc/

View File

@ -38,6 +38,7 @@
#include <linux/delay.h>
#include <linux/usb.h>
#include <linux/smp_lock.h>
#include <linux/mutex.h>
#include "dabusb.h"
#include "dabfirmware.h"
@ -217,12 +218,11 @@ static int dabusb_alloc_buffers (pdabusb_t s)
pipesize, packets, transfer_buffer_length);
while (buffers < (s->total_buffer_size << 10)) {
b = (pbuff_t) kmalloc (sizeof (buff_t), GFP_KERNEL);
b = (pbuff_t) kzalloc (sizeof (buff_t), GFP_KERNEL);
if (!b) {
err("kmalloc(sizeof(buff_t))==NULL");
err("kzalloc(sizeof(buff_t))==NULL");
goto err;
}
memset (b, 0, sizeof (buff_t));
b->s = s;
b->purb = usb_alloc_urb(packets, GFP_KERNEL);
if (!b->purb) {
@ -571,7 +571,7 @@ static ssize_t dabusb_read (struct file *file, char __user *buf, size_t count, l
s->readptr = 0;
}
}
err: //up(&s->mutex);
err: //mutex_unlock(&s->mutex);
return ret;
}
@ -586,10 +586,10 @@ static int dabusb_open (struct inode *inode, struct file *file)
s = &dabusb[devnum - DABUSB_MINOR];
dbg("dabusb_open");
down (&s->mutex);
mutex_lock(&s->mutex);
while (!s->usbdev || s->opened) {
up (&s->mutex);
mutex_unlock(&s->mutex);
if (file->f_flags & O_NONBLOCK) {
return -EBUSY;
@ -599,15 +599,15 @@ static int dabusb_open (struct inode *inode, struct file *file)
if (signal_pending (current)) {
return -EAGAIN;
}
down (&s->mutex);
mutex_lock(&s->mutex);
}
if (usb_set_interface (s->usbdev, _DABUSB_IF, 1) < 0) {
up(&s->mutex);
mutex_unlock(&s->mutex);
err("set_interface failed");
return -EINVAL;
}
s->opened = 1;
up (&s->mutex);
mutex_unlock(&s->mutex);
file->f_pos = 0;
file->private_data = s;
@ -621,10 +621,10 @@ static int dabusb_release (struct inode *inode, struct file *file)
dbg("dabusb_release");
down (&s->mutex);
mutex_lock(&s->mutex);
dabusb_stop (s);
dabusb_free_buffers (s);
up (&s->mutex);
mutex_unlock(&s->mutex);
if (!s->remove_pending) {
if (usb_set_interface (s->usbdev, _DABUSB_IF, 0) < 0)
@ -649,10 +649,10 @@ static int dabusb_ioctl (struct inode *inode, struct file *file, unsigned int cm
if (s->remove_pending)
return -EIO;
down (&s->mutex);
mutex_lock(&s->mutex);
if (!s->usbdev) {
up (&s->mutex);
mutex_unlock(&s->mutex);
return -EIO;
}
@ -692,7 +692,7 @@ static int dabusb_ioctl (struct inode *inode, struct file *file, unsigned int cm
ret = -ENOIOCTLCMD;
break;
}
up (&s->mutex);
mutex_unlock(&s->mutex);
return ret;
}
@ -738,7 +738,7 @@ static int dabusb_probe (struct usb_interface *intf,
s = &dabusb[intf->minor];
down (&s->mutex);
mutex_lock(&s->mutex);
s->remove_pending = 0;
s->usbdev = usbdev;
s->devnum = intf->minor;
@ -761,7 +761,7 @@ static int dabusb_probe (struct usb_interface *intf,
}
dbg("bound to interface: %d", intf->altsetting->desc.bInterfaceNumber);
usb_set_intfdata (intf, s);
up (&s->mutex);
mutex_unlock(&s->mutex);
retval = usb_register_dev(intf, &dabusb_class);
if (retval) {
@ -772,7 +772,7 @@ static int dabusb_probe (struct usb_interface *intf,
return 0;
reject:
up (&s->mutex);
mutex_unlock(&s->mutex);
s->usbdev = NULL;
return -ENODEV;
}
@ -829,7 +829,7 @@ static int __init dabusb_init (void)
for (u = 0; u < NRDABUSB; u++) {
pdabusb_t s = &dabusb[u];
memset (s, 0, sizeof (dabusb_t));
init_MUTEX (&s->mutex);
mutex_init (&s->mutex);
s->usbdev = NULL;
s->total_buffer_size = buffers;
init_waitqueue_head (&s->wait);

View File

@ -18,7 +18,7 @@ typedef enum { _stopped=0, _started } driver_state_t;
typedef struct
{
struct semaphore mutex;
struct mutex mutex;
struct usb_device *usbdev;
wait_queue_head_t wait;
wait_queue_head_t remove_ok;

View File

@ -33,7 +33,9 @@
#include <linux/types.h>
#include <linux/param.h>
#include <linux/rwsem.h>
#include <asm/semaphore.h>
#include <linux/mutex.h>
#include <linux/stddef.h>
#include <linux/string.h>
#include "et61x251_sensor.h"
@ -51,6 +53,7 @@
#define ET61X251_ALTERNATE_SETTING 13
#define ET61X251_URB_TIMEOUT msecs_to_jiffies(2 * ET61X251_ISO_PACKETS)
#define ET61X251_CTRL_TIMEOUT 100
#define ET61X251_FRAME_TIMEOUT 2
/*****************************************************************************/
@ -127,15 +130,16 @@ struct et61x251_sysfs_attr {
struct et61x251_module_param {
u8 force_munmap;
u16 frame_timeout;
};
static DECLARE_MUTEX(et61x251_sysfs_lock);
static DEFINE_MUTEX(et61x251_sysfs_lock);
static DECLARE_RWSEM(et61x251_disconnect);
struct et61x251_device {
struct video_device* v4ldev;
struct et61x251_sensor* sensor;
struct et61x251_sensor sensor;
struct usb_device* usbdev;
struct urb* urb[ET61X251_URBS];
@ -157,19 +161,28 @@ struct et61x251_device {
enum et61x251_dev_state state;
u8 users;
struct semaphore dev_sem, fileop_sem;
struct mutex dev_mutex, fileop_mutex;
spinlock_t queue_lock;
wait_queue_head_t open, wait_frame, wait_stream;
};
/*****************************************************************************/
struct et61x251_device*
et61x251_match_id(struct et61x251_device* cam, const struct usb_device_id *id)
{
if (usb_match_id(usb_ifnum_to_if(cam->usbdev, 0), id))
return cam;
return NULL;
}
void
et61x251_attach_sensor(struct et61x251_device* cam,
struct et61x251_sensor* sensor)
{
cam->sensor = sensor;
cam->sensor->usbdev = cam->usbdev;
memcpy(&cam->sensor, sensor, sizeof(struct et61x251_sensor));
}
/*****************************************************************************/
@ -212,7 +225,8 @@ do { \
#undef PDBG
#define PDBG(fmt, args...) \
dev_info(&cam->dev, "[%s:%d] " fmt "\n", __FUNCTION__, __LINE__ , ## args)
dev_info(&cam->usbdev->dev, "[%s:%d] " fmt "\n", \
__FUNCTION__, __LINE__ , ## args)
#undef PDBGG
#define PDBGG(fmt, args...) do {;} while(0) /* placeholder */

View File

@ -25,11 +25,9 @@
#include <linux/moduleparam.h>
#include <linux/errno.h>
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/device.h>
#include <linux/fs.h>
#include <linux/delay.h>
#include <linux/stddef.h>
#include <linux/compiler.h>
#include <linux/ioctl.h>
#include <linux/poll.h>
@ -50,8 +48,8 @@
#define ET61X251_MODULE_AUTHOR "(C) 2006 Luca Risolia"
#define ET61X251_AUTHOR_EMAIL "<luca.risolia@studio.unibo.it>"
#define ET61X251_MODULE_LICENSE "GPL"
#define ET61X251_MODULE_VERSION "1:1.01"
#define ET61X251_MODULE_VERSION_CODE KERNEL_VERSION(1, 0, 1)
#define ET61X251_MODULE_VERSION "1:1.02"
#define ET61X251_MODULE_VERSION_CODE KERNEL_VERSION(1, 0, 2)
/*****************************************************************************/
@ -90,6 +88,16 @@ MODULE_PARM_DESC(force_munmap,
"\nDefault value is "__MODULE_STRING(SN9C102_FORCE_MUNMAP)"."
"\n");
static unsigned int frame_timeout[] = {[0 ... ET61X251_MAX_DEVICES-1] =
ET61X251_FRAME_TIMEOUT};
module_param_array(frame_timeout, uint, NULL, 0644);
MODULE_PARM_DESC(frame_timeout,
"\n<n[,...]> Timeout for a video frame in seconds."
"\nThis parameter is specific for each detected camera."
"\nDefault value is "
__MODULE_STRING(ET61X251_FRAME_TIMEOUT)"."
"\n");
#ifdef ET61X251_DEBUG
static unsigned short debug = ET61X251_DEBUG_LEVEL;
module_param(debug, ushort, 0644);
@ -111,8 +119,8 @@ static u32
et61x251_request_buffers(struct et61x251_device* cam, u32 count,
enum et61x251_io_method io)
{
struct v4l2_pix_format* p = &(cam->sensor->pix_format);
struct v4l2_rect* r = &(cam->sensor->cropcap.bounds);
struct v4l2_pix_format* p = &(cam->sensor.pix_format);
struct v4l2_rect* r = &(cam->sensor.cropcap.bounds);
const size_t imagesize = cam->module_param.force_munmap ||
io == IO_READ ?
(p->width * p->height * p->priv) / 8 :
@ -268,8 +276,8 @@ et61x251_i2c_try_read(struct et61x251_device* cam,
int err = 0, res;
data[0] = address;
data[1] = cam->sensor->i2c_slave_id;
data[2] = cam->sensor->rsta | 0x10;
data[1] = cam->sensor.i2c_slave_id;
data[2] = cam->sensor.rsta | 0x10;
data[3] = !(et61x251_read_reg(cam, 0x8b) & 0x02);
res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x00, 0x41,
0, 0x88, data, 4, ET61X251_CTRL_TIMEOUT);
@ -301,8 +309,8 @@ et61x251_i2c_try_write(struct et61x251_device* cam,
int err = 0, res;
data[0] = address;
data[1] = cam->sensor->i2c_slave_id;
data[2] = cam->sensor->rsta | 0x12;
data[1] = cam->sensor.i2c_slave_id;
data[2] = cam->sensor.rsta | 0x12;
res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x00, 0x41,
0, 0x88, data, 3, ET61X251_CTRL_TIMEOUT);
if (res < 0)
@ -334,9 +342,6 @@ et61x251_i2c_raw_write(struct et61x251_device* cam, u8 n, u8 data1, u8 data2,
u8* data = cam->control_buffer;
int err = 0, res;
if (!cam->sensor)
return -1;
data[0] = data2;
data[1] = data3;
data[2] = data4;
@ -350,8 +355,8 @@ et61x251_i2c_raw_write(struct et61x251_device* cam, u8 n, u8 data1, u8 data2,
err += res;
data[0] = address;
data[1] = cam->sensor->i2c_slave_id;
data[2] = cam->sensor->rsta | 0x02 | (n << 4);
data[1] = cam->sensor.i2c_slave_id;
data[2] = cam->sensor.rsta | 0x02 | (n << 4);
res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x00, 0x41,
0, 0x88, data, 3, ET61X251_CTRL_TIMEOUT);
if (res < 0)
@ -364,11 +369,11 @@ et61x251_i2c_raw_write(struct et61x251_device* cam, u8 n, u8 data1, u8 data2,
if (res < 0)
err += res;
err += et61x251_i2c_wait(cam, cam->sensor);
err += et61x251_i2c_wait(cam, &cam->sensor);
if (err)
DBG(3, "I2C raw write failed for %s image sensor",
cam->sensor->name);
cam->sensor.name);
PDBGG("I2C raw write: %u bytes, address = 0x%02X, data1 = 0x%02X, "
"data2 = 0x%02X, data3 = 0x%02X, data4 = 0x%02X, data5 = 0x%02X,"
@ -382,19 +387,13 @@ et61x251_i2c_raw_write(struct et61x251_device* cam, u8 n, u8 data1, u8 data2,
int et61x251_i2c_read(struct et61x251_device* cam, u8 address)
{
if (!cam->sensor)
return -1;
return et61x251_i2c_try_read(cam, cam->sensor, address);
return et61x251_i2c_try_read(cam, &cam->sensor, address);
}
int et61x251_i2c_write(struct et61x251_device* cam, u8 address, u8 value)
{
if (!cam->sensor)
return -1;
return et61x251_i2c_try_write(cam, cam->sensor, address, value);
return et61x251_i2c_try_write(cam, &cam->sensor, address, value);
}
/*****************************************************************************/
@ -417,7 +416,7 @@ static void et61x251_urb_complete(struct urb *urb, struct pt_regs* regs)
if ((*f))
(*f)->state = F_QUEUED;
DBG(3, "Stream interrupted");
wake_up_interruptible(&cam->wait_stream);
wake_up(&cam->wait_stream);
}
if (cam->state & DEV_DISCONNECTED)
@ -435,9 +434,9 @@ static void et61x251_urb_complete(struct urb *urb, struct pt_regs* regs)
(*f) = list_entry(cam->inqueue.next, struct et61x251_frame_t,
frame);
imagesize = (cam->sensor->pix_format.width *
cam->sensor->pix_format.height *
cam->sensor->pix_format.priv) / 8;
imagesize = (cam->sensor.pix_format.width *
cam->sensor.pix_format.height *
cam->sensor.pix_format.priv) / 8;
for (i = 0; i < urb->number_of_packets; i++) {
unsigned int len, status;
@ -476,7 +475,7 @@ start_of_frame:
if ((*f)->state == F_GRABBING) {
if (sof && (*f)->buf.bytesused) {
if (cam->sensor->pix_format.pixelformat ==
if (cam->sensor.pix_format.pixelformat ==
V4L2_PIX_FMT_ET61X251)
goto end_of_frame;
else {
@ -521,7 +520,7 @@ end_of_frame:
goto resubmit_urb;
if (sof &&
cam->sensor->pix_format.pixelformat ==
cam->sensor.pix_format.pixelformat ==
V4L2_PIX_FMT_ET61X251)
goto start_of_frame;
}
@ -650,21 +649,21 @@ static int et61x251_stop_transfer(struct et61x251_device* cam)
static int et61x251_stream_interrupt(struct et61x251_device* cam)
{
int err = 0;
long timeout;
cam->stream = STREAM_INTERRUPT;
err = wait_event_timeout(cam->wait_stream,
(cam->stream == STREAM_OFF) ||
(cam->state & DEV_DISCONNECTED),
ET61X251_URB_TIMEOUT);
timeout = wait_event_timeout(cam->wait_stream,
(cam->stream == STREAM_OFF) ||
(cam->state & DEV_DISCONNECTED),
ET61X251_URB_TIMEOUT);
if (cam->state & DEV_DISCONNECTED)
return -ENODEV;
else if (err) {
else if (cam->stream != STREAM_OFF) {
cam->state |= DEV_MISCONFIGURED;
DBG(1, "URB timeout reached. The camera is misconfigured. To "
"use it, close and open /dev/video%d again.",
cam->v4ldev->minor);
return err;
return -EIO;
}
return 0;
@ -709,18 +708,18 @@ static ssize_t et61x251_show_reg(struct class_device* cd, char* buf)
struct et61x251_device* cam;
ssize_t count;
if (down_interruptible(&et61x251_sysfs_lock))
if (mutex_lock_interruptible(&et61x251_sysfs_lock))
return -ERESTARTSYS;
cam = video_get_drvdata(to_video_device(cd));
if (!cam) {
up(&et61x251_sysfs_lock);
mutex_unlock(&et61x251_sysfs_lock);
return -ENODEV;
}
count = sprintf(buf, "%u\n", cam->sysfs.reg);
up(&et61x251_sysfs_lock);
mutex_unlock(&et61x251_sysfs_lock);
return count;
}
@ -733,18 +732,18 @@ et61x251_store_reg(struct class_device* cd, const char* buf, size_t len)
u8 index;
ssize_t count;
if (down_interruptible(&et61x251_sysfs_lock))
if (mutex_lock_interruptible(&et61x251_sysfs_lock))
return -ERESTARTSYS;
cam = video_get_drvdata(to_video_device(cd));
if (!cam) {
up(&et61x251_sysfs_lock);
mutex_unlock(&et61x251_sysfs_lock);
return -ENODEV;
}
index = et61x251_strtou8(buf, len, &count);
if (index > 0x8e || !count) {
up(&et61x251_sysfs_lock);
mutex_unlock(&et61x251_sysfs_lock);
return -EINVAL;
}
@ -753,7 +752,7 @@ et61x251_store_reg(struct class_device* cd, const char* buf, size_t len)
DBG(2, "Moved ET61X[12]51 register index to 0x%02X", cam->sysfs.reg);
DBG(3, "Written bytes: %zd", count);
up(&et61x251_sysfs_lock);
mutex_unlock(&et61x251_sysfs_lock);
return count;
}
@ -765,17 +764,17 @@ static ssize_t et61x251_show_val(struct class_device* cd, char* buf)
ssize_t count;
int val;
if (down_interruptible(&et61x251_sysfs_lock))
if (mutex_lock_interruptible(&et61x251_sysfs_lock))
return -ERESTARTSYS;
cam = video_get_drvdata(to_video_device(cd));
if (!cam) {
up(&et61x251_sysfs_lock);
mutex_unlock(&et61x251_sysfs_lock);
return -ENODEV;
}
if ((val = et61x251_read_reg(cam, cam->sysfs.reg)) < 0) {
up(&et61x251_sysfs_lock);
mutex_unlock(&et61x251_sysfs_lock);
return -EIO;
}
@ -783,7 +782,7 @@ static ssize_t et61x251_show_val(struct class_device* cd, char* buf)
DBG(3, "Read bytes: %zd", count);
up(&et61x251_sysfs_lock);
mutex_unlock(&et61x251_sysfs_lock);
return count;
}
@ -797,24 +796,24 @@ et61x251_store_val(struct class_device* cd, const char* buf, size_t len)
ssize_t count;
int err;
if (down_interruptible(&et61x251_sysfs_lock))
if (mutex_lock_interruptible(&et61x251_sysfs_lock))
return -ERESTARTSYS;
cam = video_get_drvdata(to_video_device(cd));
if (!cam) {
up(&et61x251_sysfs_lock);
mutex_unlock(&et61x251_sysfs_lock);
return -ENODEV;
}
value = et61x251_strtou8(buf, len, &count);
if (!count) {
up(&et61x251_sysfs_lock);
mutex_unlock(&et61x251_sysfs_lock);
return -EINVAL;
}
err = et61x251_write_reg(cam, value, cam->sysfs.reg);
if (err) {
up(&et61x251_sysfs_lock);
mutex_unlock(&et61x251_sysfs_lock);
return -EIO;
}
@ -822,7 +821,7 @@ et61x251_store_val(struct class_device* cd, const char* buf, size_t len)
cam->sysfs.reg, value);
DBG(3, "Written bytes: %zd", count);
up(&et61x251_sysfs_lock);
mutex_unlock(&et61x251_sysfs_lock);
return count;
}
@ -833,12 +832,12 @@ static ssize_t et61x251_show_i2c_reg(struct class_device* cd, char* buf)
struct et61x251_device* cam;
ssize_t count;
if (down_interruptible(&et61x251_sysfs_lock))
if (mutex_lock_interruptible(&et61x251_sysfs_lock))
return -ERESTARTSYS;
cam = video_get_drvdata(to_video_device(cd));
if (!cam) {
up(&et61x251_sysfs_lock);
mutex_unlock(&et61x251_sysfs_lock);
return -ENODEV;
}
@ -846,7 +845,7 @@ static ssize_t et61x251_show_i2c_reg(struct class_device* cd, char* buf)
DBG(3, "Read bytes: %zd", count);
up(&et61x251_sysfs_lock);
mutex_unlock(&et61x251_sysfs_lock);
return count;
}
@ -859,18 +858,18 @@ et61x251_store_i2c_reg(struct class_device* cd, const char* buf, size_t len)
u8 index;
ssize_t count;
if (down_interruptible(&et61x251_sysfs_lock))
if (mutex_lock_interruptible(&et61x251_sysfs_lock))
return -ERESTARTSYS;
cam = video_get_drvdata(to_video_device(cd));
if (!cam) {
up(&et61x251_sysfs_lock);
mutex_unlock(&et61x251_sysfs_lock);
return -ENODEV;
}
index = et61x251_strtou8(buf, len, &count);
if (!count) {
up(&et61x251_sysfs_lock);
mutex_unlock(&et61x251_sysfs_lock);
return -EINVAL;
}
@ -879,7 +878,7 @@ et61x251_store_i2c_reg(struct class_device* cd, const char* buf, size_t len)
DBG(2, "Moved sensor register index to 0x%02X", cam->sysfs.i2c_reg);
DBG(3, "Written bytes: %zd", count);
up(&et61x251_sysfs_lock);
mutex_unlock(&et61x251_sysfs_lock);
return count;
}
@ -891,22 +890,22 @@ static ssize_t et61x251_show_i2c_val(struct class_device* cd, char* buf)
ssize_t count;
int val;
if (down_interruptible(&et61x251_sysfs_lock))
if (mutex_lock_interruptible(&et61x251_sysfs_lock))
return -ERESTARTSYS;
cam = video_get_drvdata(to_video_device(cd));
if (!cam) {
up(&et61x251_sysfs_lock);
mutex_unlock(&et61x251_sysfs_lock);
return -ENODEV;
}
if (!(cam->sensor->sysfs_ops & ET61X251_I2C_READ)) {
up(&et61x251_sysfs_lock);
if (!(cam->sensor.sysfs_ops & ET61X251_I2C_READ)) {
mutex_unlock(&et61x251_sysfs_lock);
return -ENOSYS;
}
if ((val = et61x251_i2c_read(cam, cam->sysfs.i2c_reg)) < 0) {
up(&et61x251_sysfs_lock);
mutex_unlock(&et61x251_sysfs_lock);
return -EIO;
}
@ -914,7 +913,7 @@ static ssize_t et61x251_show_i2c_val(struct class_device* cd, char* buf)
DBG(3, "Read bytes: %zd", count);
up(&et61x251_sysfs_lock);
mutex_unlock(&et61x251_sysfs_lock);
return count;
}
@ -928,29 +927,29 @@ et61x251_store_i2c_val(struct class_device* cd, const char* buf, size_t len)
ssize_t count;
int err;
if (down_interruptible(&et61x251_sysfs_lock))
if (mutex_lock_interruptible(&et61x251_sysfs_lock))
return -ERESTARTSYS;
cam = video_get_drvdata(to_video_device(cd));
if (!cam) {
up(&et61x251_sysfs_lock);
mutex_unlock(&et61x251_sysfs_lock);
return -ENODEV;
}
if (!(cam->sensor->sysfs_ops & ET61X251_I2C_READ)) {
up(&et61x251_sysfs_lock);
if (!(cam->sensor.sysfs_ops & ET61X251_I2C_READ)) {
mutex_unlock(&et61x251_sysfs_lock);
return -ENOSYS;
}
value = et61x251_strtou8(buf, len, &count);
if (!count) {
up(&et61x251_sysfs_lock);
mutex_unlock(&et61x251_sysfs_lock);
return -EINVAL;
}
err = et61x251_i2c_write(cam, cam->sysfs.i2c_reg, value);
if (err) {
up(&et61x251_sysfs_lock);
mutex_unlock(&et61x251_sysfs_lock);
return -EIO;
}
@ -958,7 +957,7 @@ et61x251_store_i2c_val(struct class_device* cd, const char* buf, size_t len)
cam->sysfs.i2c_reg, value);
DBG(3, "Written bytes: %zd", count);
up(&et61x251_sysfs_lock);
mutex_unlock(&et61x251_sysfs_lock);
return count;
}
@ -980,7 +979,7 @@ static void et61x251_create_sysfs(struct et61x251_device* cam)
video_device_create_file(v4ldev, &class_device_attr_reg);
video_device_create_file(v4ldev, &class_device_attr_val);
if (cam->sensor && cam->sensor->sysfs_ops) {
if (cam->sensor.sysfs_ops) {
video_device_create_file(v4ldev, &class_device_attr_i2c_reg);
video_device_create_file(v4ldev, &class_device_attr_i2c_val);
}
@ -1048,7 +1047,7 @@ static int et61x251_set_scale(struct et61x251_device* cam, u8 scale)
static int
et61x251_set_crop(struct et61x251_device* cam, struct v4l2_rect* rect)
{
struct et61x251_sensor* s = cam->sensor;
struct et61x251_sensor* s = &cam->sensor;
u16 fmw_sx = (u16)(rect->left - s->cropcap.bounds.left +
s->active_pixel.left),
fmw_sy = (u16)(rect->top - s->cropcap.bounds.top +
@ -1076,7 +1075,7 @@ et61x251_set_crop(struct et61x251_device* cam, struct v4l2_rect* rect)
static int et61x251_init(struct et61x251_device* cam)
{
struct et61x251_sensor* s = cam->sensor;
struct et61x251_sensor* s = &cam->sensor;
struct v4l2_control ctrl;
struct v4l2_queryctrl *qctrl;
struct v4l2_rect* rect;
@ -1143,7 +1142,7 @@ static int et61x251_init(struct et61x251_device* cam)
}
if (!(cam->state & DEV_INITIALIZED)) {
init_MUTEX(&cam->fileop_sem);
mutex_init(&cam->fileop_mutex);
spin_lock_init(&cam->queue_lock);
init_waitqueue_head(&cam->wait_frame);
init_waitqueue_head(&cam->wait_stream);
@ -1161,13 +1160,15 @@ static int et61x251_init(struct et61x251_device* cam)
static void et61x251_release_resources(struct et61x251_device* cam)
{
down(&et61x251_sysfs_lock);
mutex_lock(&et61x251_sysfs_lock);
DBG(2, "V4L2 device /dev/video%d deregistered", cam->v4ldev->minor);
video_set_drvdata(cam->v4ldev, NULL);
video_unregister_device(cam->v4ldev);
up(&et61x251_sysfs_lock);
usb_put_dev(cam->usbdev);
mutex_unlock(&et61x251_sysfs_lock);
kfree(cam->control_buffer);
}
@ -1188,7 +1189,7 @@ static int et61x251_open(struct inode* inode, struct file* filp)
cam = video_get_drvdata(video_devdata(filp));
if (down_interruptible(&cam->dev_sem)) {
if (mutex_lock_interruptible(&cam->dev_mutex)) {
up_read(&et61x251_disconnect);
return -ERESTARTSYS;
}
@ -1200,7 +1201,7 @@ static int et61x251_open(struct inode* inode, struct file* filp)
err = -EWOULDBLOCK;
goto out;
}
up(&cam->dev_sem);
mutex_unlock(&cam->dev_mutex);
err = wait_event_interruptible_exclusive(cam->open,
cam->state & DEV_DISCONNECTED
|| !cam->users);
@ -1212,7 +1213,7 @@ static int et61x251_open(struct inode* inode, struct file* filp)
up_read(&et61x251_disconnect);
return -ENODEV;
}
down(&cam->dev_sem);
mutex_lock(&cam->dev_mutex);
}
@ -1240,7 +1241,7 @@ static int et61x251_open(struct inode* inode, struct file* filp)
DBG(3, "Video device /dev/video%d is open", cam->v4ldev->minor);
out:
up(&cam->dev_sem);
mutex_unlock(&cam->dev_mutex);
up_read(&et61x251_disconnect);
return err;
}
@ -1250,7 +1251,7 @@ static int et61x251_release(struct inode* inode, struct file* filp)
{
struct et61x251_device* cam = video_get_drvdata(video_devdata(filp));
down(&cam->dev_sem); /* prevent disconnect() to be called */
mutex_lock(&cam->dev_mutex); /* prevent disconnect() to be called */
et61x251_stop_transfer(cam);
@ -1258,7 +1259,7 @@ static int et61x251_release(struct inode* inode, struct file* filp)
if (cam->state & DEV_DISCONNECTED) {
et61x251_release_resources(cam);
up(&cam->dev_sem);
mutex_unlock(&cam->dev_mutex);
kfree(cam);
return 0;
}
@ -1268,7 +1269,7 @@ static int et61x251_release(struct inode* inode, struct file* filp)
DBG(3, "Video device /dev/video%d closed", cam->v4ldev->minor);
up(&cam->dev_sem);
mutex_unlock(&cam->dev_mutex);
return 0;
}
@ -1281,28 +1282,29 @@ et61x251_read(struct file* filp, char __user * buf,
struct et61x251_device* cam = video_get_drvdata(video_devdata(filp));
struct et61x251_frame_t* f, * i;
unsigned long lock_flags;
long timeout;
int err = 0;
if (down_interruptible(&cam->fileop_sem))
if (mutex_lock_interruptible(&cam->fileop_mutex))
return -ERESTARTSYS;
if (cam->state & DEV_DISCONNECTED) {
DBG(1, "Device not present");
up(&cam->fileop_sem);
mutex_unlock(&cam->fileop_mutex);
return -ENODEV;
}
if (cam->state & DEV_MISCONFIGURED) {
DBG(1, "The camera is misconfigured. Close and open it "
"again.");
up(&cam->fileop_sem);
mutex_unlock(&cam->fileop_mutex);
return -EIO;
}
if (cam->io == IO_MMAP) {
DBG(3, "Close and open the device again to choose the read "
"method");
up(&cam->fileop_sem);
mutex_unlock(&cam->fileop_mutex);
return -EINVAL;
}
@ -1310,7 +1312,7 @@ et61x251_read(struct file* filp, char __user * buf,
if (!et61x251_request_buffers(cam, cam->nreadbuffers,
IO_READ)) {
DBG(1, "read() failed, not enough memory");
up(&cam->fileop_sem);
mutex_unlock(&cam->fileop_mutex);
return -ENOMEM;
}
cam->io = IO_READ;
@ -1324,30 +1326,32 @@ et61x251_read(struct file* filp, char __user * buf,
}
if (!count) {
up(&cam->fileop_sem);
mutex_unlock(&cam->fileop_mutex);
return 0;
}
if (list_empty(&cam->outqueue)) {
if (filp->f_flags & O_NONBLOCK) {
up(&cam->fileop_sem);
mutex_unlock(&cam->fileop_mutex);
return -EAGAIN;
}
err = wait_event_interruptible
( cam->wait_frame,
(!list_empty(&cam->outqueue)) ||
(cam->state & DEV_DISCONNECTED) ||
(cam->state & DEV_MISCONFIGURED) );
if (err) {
up(&cam->fileop_sem);
return err;
timeout = wait_event_interruptible_timeout
( cam->wait_frame,
(!list_empty(&cam->outqueue)) ||
(cam->state & DEV_DISCONNECTED) ||
(cam->state & DEV_MISCONFIGURED),
cam->module_param.frame_timeout *
1000 * msecs_to_jiffies(1) );
if (timeout < 0) {
mutex_unlock(&cam->fileop_mutex);
return timeout;
}
if (cam->state & DEV_DISCONNECTED) {
up(&cam->fileop_sem);
mutex_unlock(&cam->fileop_mutex);
return -ENODEV;
}
if (cam->state & DEV_MISCONFIGURED) {
up(&cam->fileop_sem);
if (!timeout || (cam->state & DEV_MISCONFIGURED)) {
mutex_unlock(&cam->fileop_mutex);
return -EIO;
}
}
@ -1375,7 +1379,7 @@ exit:
PDBGG("Frame #%lu, bytes read: %zu",
(unsigned long)f->buf.index, count);
up(&cam->fileop_sem);
mutex_unlock(&cam->fileop_mutex);
return err ? err : count;
}
@ -1388,7 +1392,7 @@ static unsigned int et61x251_poll(struct file *filp, poll_table *wait)
unsigned long lock_flags;
unsigned int mask = 0;
if (down_interruptible(&cam->fileop_sem))
if (mutex_lock_interruptible(&cam->fileop_mutex))
return POLLERR;
if (cam->state & DEV_DISCONNECTED) {
@ -1426,12 +1430,12 @@ static unsigned int et61x251_poll(struct file *filp, poll_table *wait)
if (!list_empty(&cam->outqueue))
mask |= POLLIN | POLLRDNORM;
up(&cam->fileop_sem);
mutex_unlock(&cam->fileop_mutex);
return mask;
error:
up(&cam->fileop_sem);
mutex_unlock(&cam->fileop_mutex);
return POLLERR;
}
@ -1465,25 +1469,25 @@ static int et61x251_mmap(struct file* filp, struct vm_area_struct *vma)
void *pos;
u32 i;
if (down_interruptible(&cam->fileop_sem))
if (mutex_lock_interruptible(&cam->fileop_mutex))
return -ERESTARTSYS;
if (cam->state & DEV_DISCONNECTED) {
DBG(1, "Device not present");
up(&cam->fileop_sem);
mutex_unlock(&cam->fileop_mutex);
return -ENODEV;
}
if (cam->state & DEV_MISCONFIGURED) {
DBG(1, "The camera is misconfigured. Close and open it "
"again.");
up(&cam->fileop_sem);
mutex_unlock(&cam->fileop_mutex);
return -EIO;
}
if (cam->io != IO_MMAP || !(vma->vm_flags & VM_WRITE) ||
size != PAGE_ALIGN(cam->frame[0].buf.length)) {
up(&cam->fileop_sem);
mutex_unlock(&cam->fileop_mutex);
return -EINVAL;
}
@ -1492,7 +1496,7 @@ static int et61x251_mmap(struct file* filp, struct vm_area_struct *vma)
break;
}
if (i == cam->nbuffers) {
up(&cam->fileop_sem);
mutex_unlock(&cam->fileop_mutex);
return -EINVAL;
}
@ -1502,7 +1506,7 @@ static int et61x251_mmap(struct file* filp, struct vm_area_struct *vma)
pos = cam->frame[i].bufmem;
while (size > 0) { /* size is page-aligned */
if (vm_insert_page(vma, start, vmalloc_to_page(pos))) {
up(&cam->fileop_sem);
mutex_unlock(&cam->fileop_mutex);
return -EAGAIN;
}
start += PAGE_SIZE;
@ -1515,7 +1519,7 @@ static int et61x251_mmap(struct file* filp, struct vm_area_struct *vma)
et61x251_vm_open(vma);
up(&cam->fileop_sem);
mutex_unlock(&cam->fileop_mutex);
return 0;
}
@ -1557,6 +1561,7 @@ et61x251_vidioc_enuminput(struct et61x251_device* cam, void __user * arg)
memset(&i, 0, sizeof(i));
strcpy(i.name, "Camera");
i.type = V4L2_INPUT_TYPE_CAMERA;
if (copy_to_user(arg, &i, sizeof(i)))
return -EFAULT;
@ -1566,7 +1571,19 @@ et61x251_vidioc_enuminput(struct et61x251_device* cam, void __user * arg)
static int
et61x251_vidioc_gs_input(struct et61x251_device* cam, void __user * arg)
et61x251_vidioc_g_input(struct et61x251_device* cam, void __user * arg)
{
int index = 0;
if (copy_to_user(arg, &index, sizeof(index)))
return -EFAULT;
return 0;
}
static int
et61x251_vidioc_s_input(struct et61x251_device* cam, void __user * arg)
{
int index;
@ -1583,7 +1600,7 @@ et61x251_vidioc_gs_input(struct et61x251_device* cam, void __user * arg)
static int
et61x251_vidioc_query_ctrl(struct et61x251_device* cam, void __user * arg)
{
struct et61x251_sensor* s = cam->sensor;
struct et61x251_sensor* s = &cam->sensor;
struct v4l2_queryctrl qc;
u8 i;
@ -1605,7 +1622,7 @@ et61x251_vidioc_query_ctrl(struct et61x251_device* cam, void __user * arg)
static int
et61x251_vidioc_g_ctrl(struct et61x251_device* cam, void __user * arg)
{
struct et61x251_sensor* s = cam->sensor;
struct et61x251_sensor* s = &cam->sensor;
struct v4l2_control ctrl;
int err = 0;
u8 i;
@ -1637,7 +1654,7 @@ exit:
static int
et61x251_vidioc_s_ctrl(struct et61x251_device* cam, void __user * arg)
{
struct et61x251_sensor* s = cam->sensor;
struct et61x251_sensor* s = &cam->sensor;
struct v4l2_control ctrl;
u8 i;
int err = 0;
@ -1650,6 +1667,8 @@ et61x251_vidioc_s_ctrl(struct et61x251_device* cam, void __user * arg)
for (i = 0; i < ARRAY_SIZE(s->qctrl); i++)
if (ctrl.id == s->qctrl[i].id) {
if (s->qctrl[i].flags & V4L2_CTRL_FLAG_DISABLED)
return -EINVAL;
if (ctrl.value < s->qctrl[i].minimum ||
ctrl.value > s->qctrl[i].maximum)
return -ERANGE;
@ -1669,7 +1688,7 @@ et61x251_vidioc_s_ctrl(struct et61x251_device* cam, void __user * arg)
static int
et61x251_vidioc_cropcap(struct et61x251_device* cam, void __user * arg)
{
struct v4l2_cropcap* cc = &(cam->sensor->cropcap);
struct v4l2_cropcap* cc = &(cam->sensor.cropcap);
cc->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
cc->pixelaspect.numerator = 1;
@ -1685,7 +1704,7 @@ et61x251_vidioc_cropcap(struct et61x251_device* cam, void __user * arg)
static int
et61x251_vidioc_g_crop(struct et61x251_device* cam, void __user * arg)
{
struct et61x251_sensor* s = cam->sensor;
struct et61x251_sensor* s = &cam->sensor;
struct v4l2_crop crop = {
.type = V4L2_BUF_TYPE_VIDEO_CAPTURE,
};
@ -1702,7 +1721,7 @@ et61x251_vidioc_g_crop(struct et61x251_device* cam, void __user * arg)
static int
et61x251_vidioc_s_crop(struct et61x251_device* cam, void __user * arg)
{
struct et61x251_sensor* s = cam->sensor;
struct et61x251_sensor* s = &cam->sensor;
struct v4l2_crop crop;
struct v4l2_rect* rect;
struct v4l2_rect* bounds = &(s->cropcap.bounds);
@ -1843,7 +1862,7 @@ static int
et61x251_vidioc_g_fmt(struct et61x251_device* cam, void __user * arg)
{
struct v4l2_format format;
struct v4l2_pix_format* pfmt = &(cam->sensor->pix_format);
struct v4l2_pix_format* pfmt = &(cam->sensor.pix_format);
if (copy_from_user(&format, arg, sizeof(format)))
return -EFAULT;
@ -1868,7 +1887,7 @@ static int
et61x251_vidioc_try_s_fmt(struct et61x251_device* cam, unsigned int cmd,
void __user * arg)
{
struct et61x251_sensor* s = cam->sensor;
struct et61x251_sensor* s = &cam->sensor;
struct v4l2_format format;
struct v4l2_pix_format* pix;
struct v4l2_pix_format* pfmt = &(s->pix_format);
@ -2155,7 +2174,7 @@ et61x251_vidioc_dqbuf(struct et61x251_device* cam, struct file* filp,
struct v4l2_buffer b;
struct et61x251_frame_t *f;
unsigned long lock_flags;
int err = 0;
long timeout;
if (copy_from_user(&b, arg, sizeof(b)))
return -EFAULT;
@ -2168,16 +2187,18 @@ et61x251_vidioc_dqbuf(struct et61x251_device* cam, struct file* filp,
return -EINVAL;
if (filp->f_flags & O_NONBLOCK)
return -EAGAIN;
err = wait_event_interruptible
( cam->wait_frame,
(!list_empty(&cam->outqueue)) ||
(cam->state & DEV_DISCONNECTED) ||
(cam->state & DEV_MISCONFIGURED) );
if (err)
return err;
timeout = wait_event_interruptible_timeout
( cam->wait_frame,
(!list_empty(&cam->outqueue)) ||
(cam->state & DEV_DISCONNECTED) ||
(cam->state & DEV_MISCONFIGURED),
cam->module_param.frame_timeout *
1000 * msecs_to_jiffies(1) );
if (timeout < 0)
return timeout;
if (cam->state & DEV_DISCONNECTED)
return -ENODEV;
if (cam->state & DEV_MISCONFIGURED)
if (!timeout || (cam->state & DEV_MISCONFIGURED))
return -EIO;
}
@ -2309,8 +2330,10 @@ static int et61x251_ioctl_v4l2(struct inode* inode, struct file* filp,
return et61x251_vidioc_enuminput(cam, arg);
case VIDIOC_G_INPUT:
return et61x251_vidioc_g_input(cam, arg);
case VIDIOC_S_INPUT:
return et61x251_vidioc_gs_input(cam, arg);
return et61x251_vidioc_s_input(cam, arg);
case VIDIOC_QUERYCTRL:
return et61x251_vidioc_query_ctrl(cam, arg);
@ -2393,19 +2416,19 @@ static int et61x251_ioctl(struct inode* inode, struct file* filp,
struct et61x251_device* cam = video_get_drvdata(video_devdata(filp));
int err = 0;
if (down_interruptible(&cam->fileop_sem))
if (mutex_lock_interruptible(&cam->fileop_mutex))
return -ERESTARTSYS;
if (cam->state & DEV_DISCONNECTED) {
DBG(1, "Device not present");
up(&cam->fileop_sem);
mutex_unlock(&cam->fileop_mutex);
return -ENODEV;
}
if (cam->state & DEV_MISCONFIGURED) {
DBG(1, "The camera is misconfigured. Close and open it "
"again.");
up(&cam->fileop_sem);
mutex_unlock(&cam->fileop_mutex);
return -EIO;
}
@ -2413,7 +2436,7 @@ static int et61x251_ioctl(struct inode* inode, struct file* filp,
err = et61x251_ioctl_v4l2(inode, filp, cmd, (void __user *)arg);
up(&cam->fileop_sem);
mutex_unlock(&cam->fileop_mutex);
return err;
}
@ -2459,7 +2482,7 @@ et61x251_usb_probe(struct usb_interface* intf, const struct usb_device_id* id)
goto fail;
}
init_MUTEX(&cam->dev_sem);
mutex_init(&cam->dev_mutex);
DBG(2, "ET61X[12]51 PC Camera Controller detected "
"(vid/pid 0x%04X/0x%04X)",id->idVendor, id->idProduct);
@ -2470,8 +2493,8 @@ et61x251_usb_probe(struct usb_interface* intf, const struct usb_device_id* id)
break;
}
if (!err && cam->sensor)
DBG(2, "%s image sensor detected", cam->sensor->name);
if (!err)
DBG(2, "%s image sensor detected", cam->sensor.name);
else {
DBG(1, "No supported image sensor detected");
err = -ENODEV;
@ -2492,7 +2515,7 @@ et61x251_usb_probe(struct usb_interface* intf, const struct usb_device_id* id)
cam->v4ldev->release = video_device_release;
video_set_drvdata(cam->v4ldev, cam);
down(&cam->dev_sem);
mutex_lock(&cam->dev_mutex);
err = video_register_device(cam->v4ldev, VFL_TYPE_GRABBER,
video_nr[dev_nr]);
@ -2502,13 +2525,14 @@ et61x251_usb_probe(struct usb_interface* intf, const struct usb_device_id* id)
DBG(1, "Free /dev/videoX node not found");
video_nr[dev_nr] = -1;
dev_nr = (dev_nr < ET61X251_MAX_DEVICES-1) ? dev_nr+1 : 0;
up(&cam->dev_sem);
mutex_unlock(&cam->dev_mutex);
goto fail;
}
DBG(2, "V4L2 device registered as /dev/video%d", cam->v4ldev->minor);
cam->module_param.force_munmap = force_munmap[dev_nr];
cam->module_param.frame_timeout = frame_timeout[dev_nr];
dev_nr = (dev_nr < ET61X251_MAX_DEVICES-1) ? dev_nr+1 : 0;
@ -2519,7 +2543,7 @@ et61x251_usb_probe(struct usb_interface* intf, const struct usb_device_id* id)
usb_set_intfdata(intf, cam);
up(&cam->dev_sem);
mutex_unlock(&cam->dev_mutex);
return 0;
@ -2543,7 +2567,7 @@ static void et61x251_usb_disconnect(struct usb_interface* intf)
down_write(&et61x251_disconnect);
down(&cam->dev_sem);
mutex_lock(&cam->dev_mutex);
DBG(2, "Disconnecting %s...", cam->v4ldev->name);
@ -2557,13 +2581,14 @@ static void et61x251_usb_disconnect(struct usb_interface* intf)
et61x251_stop_transfer(cam);
cam->state |= DEV_DISCONNECTED;
wake_up_interruptible(&cam->wait_frame);
wake_up_interruptible(&cam->wait_stream);
wake_up(&cam->wait_stream);
usb_get_dev(cam->usbdev);
} else {
cam->state |= DEV_DISCONNECTED;
et61x251_release_resources(cam);
}
up(&cam->dev_sem);
mutex_unlock(&cam->dev_mutex);
if (!cam->users)
kfree(cam);

View File

@ -42,6 +42,9 @@ static int (*et61x251_sensor_table[])(struct et61x251_device*) = { \
NULL, \
};
extern struct et61x251_device*
et61x251_match_id(struct et61x251_device* cam, const struct usb_device_id *id);
extern void
et61x251_attach_sensor(struct et61x251_device* cam,
struct et61x251_sensor* sensor);
@ -105,8 +108,6 @@ struct et61x251_sensor {
int (*set_pix_format)(struct et61x251_device* cam,
const struct v4l2_pix_format* pix);
const struct usb_device* usbdev;
/* Private */
struct v4l2_queryctrl _qctrl[ET61X251_MAX_CTRLS];
struct v4l2_rect _rect;

View File

@ -126,12 +126,16 @@ static struct et61x251_sensor tas5130d1b = {
int et61x251_probe_tas5130d1b(struct et61x251_device* cam)
{
/* This sensor has no identifiers, so let's attach it anyway */
et61x251_attach_sensor(cam, &tas5130d1b);
const struct usb_device_id tas5130d1b_id_table[] = {
{ USB_DEVICE(0x102c, 0x6251), },
{ }
};
/* Sensor detection is based on USB pid/vid */
if (le16_to_cpu(tas5130d1b.usbdev->descriptor.idProduct) != 0x6251)
if (!et61x251_match_id(cam, tas5130d1b_id_table))
return -ENODEV;
et61x251_attach_sensor(cam, &tas5130d1b);
return 0;
}

View File

@ -365,14 +365,14 @@ reg_w(struct usb_ov511 *ov, unsigned char reg, unsigned char value)
PDEBUG(5, "0x%02X:0x%02X", reg, value);
down(&ov->cbuf_lock);
mutex_lock(&ov->cbuf_lock);
ov->cbuf[0] = value;
rc = usb_control_msg(ov->dev,
usb_sndctrlpipe(ov->dev, 0),
(ov->bclass == BCL_OV518)?1:2 /* REG_IO */,
USB_TYPE_VENDOR | USB_RECIP_DEVICE,
0, (__u16)reg, &ov->cbuf[0], 1, 1000);
up(&ov->cbuf_lock);
mutex_unlock(&ov->cbuf_lock);
if (rc < 0)
err("reg write: error %d: %s", rc, symbolic(urb_errlist, rc));
@ -387,7 +387,7 @@ reg_r(struct usb_ov511 *ov, unsigned char reg)
{
int rc;
down(&ov->cbuf_lock);
mutex_lock(&ov->cbuf_lock);
rc = usb_control_msg(ov->dev,
usb_rcvctrlpipe(ov->dev, 0),
(ov->bclass == BCL_OV518)?1:3 /* REG_IO */,
@ -401,7 +401,7 @@ reg_r(struct usb_ov511 *ov, unsigned char reg)
PDEBUG(5, "0x%02X:0x%02X", reg, ov->cbuf[0]);
}
up(&ov->cbuf_lock);
mutex_unlock(&ov->cbuf_lock);
return rc;
}
@ -444,7 +444,7 @@ ov518_reg_w32(struct usb_ov511 *ov, unsigned char reg, u32 val, int n)
PDEBUG(5, "0x%02X:%7d, n=%d", reg, val, n);
down(&ov->cbuf_lock);
mutex_lock(&ov->cbuf_lock);
*((__le32 *)ov->cbuf) = __cpu_to_le32(val);
@ -453,7 +453,7 @@ ov518_reg_w32(struct usb_ov511 *ov, unsigned char reg, u32 val, int n)
1 /* REG_IO */,
USB_TYPE_VENDOR | USB_RECIP_DEVICE,
0, (__u16)reg, ov->cbuf, n, 1000);
up(&ov->cbuf_lock);
mutex_unlock(&ov->cbuf_lock);
if (rc < 0)
err("reg write multiple: error %d: %s", rc,
@ -768,14 +768,14 @@ i2c_r(struct usb_ov511 *ov, unsigned char reg)
{
int rc;
down(&ov->i2c_lock);
mutex_lock(&ov->i2c_lock);
if (ov->bclass == BCL_OV518)
rc = ov518_i2c_read_internal(ov, reg);
else
rc = ov511_i2c_read_internal(ov, reg);
up(&ov->i2c_lock);
mutex_unlock(&ov->i2c_lock);
return rc;
}
@ -785,14 +785,14 @@ i2c_w(struct usb_ov511 *ov, unsigned char reg, unsigned char value)
{
int rc;
down(&ov->i2c_lock);
mutex_lock(&ov->i2c_lock);
if (ov->bclass == BCL_OV518)
rc = ov518_i2c_write_internal(ov, reg, value);
else
rc = ov511_i2c_write_internal(ov, reg, value);
up(&ov->i2c_lock);
mutex_unlock(&ov->i2c_lock);
return rc;
}
@ -842,9 +842,9 @@ i2c_w_mask(struct usb_ov511 *ov,
{
int rc;
down(&ov->i2c_lock);
mutex_lock(&ov->i2c_lock);
rc = ov51x_i2c_write_mask_internal(ov, reg, value, mask);
up(&ov->i2c_lock);
mutex_unlock(&ov->i2c_lock);
return rc;
}
@ -880,7 +880,7 @@ i2c_w_slave(struct usb_ov511 *ov,
{
int rc = 0;
down(&ov->i2c_lock);
mutex_lock(&ov->i2c_lock);
/* Set new slave IDs */
rc = i2c_set_slave_internal(ov, slave);
@ -894,7 +894,7 @@ out:
if (i2c_set_slave_internal(ov, ov->primary_i2c_slave) < 0)
err("Couldn't restore primary I2C slave");
up(&ov->i2c_lock);
mutex_unlock(&ov->i2c_lock);
return rc;
}
@ -906,7 +906,7 @@ i2c_r_slave(struct usb_ov511 *ov,
{
int rc;
down(&ov->i2c_lock);
mutex_lock(&ov->i2c_lock);
/* Set new slave IDs */
rc = i2c_set_slave_internal(ov, slave);
@ -923,7 +923,7 @@ out:
if (i2c_set_slave_internal(ov, ov->primary_i2c_slave) < 0)
err("Couldn't restore primary I2C slave");
up(&ov->i2c_lock);
mutex_unlock(&ov->i2c_lock);
return rc;
}
@ -933,7 +933,7 @@ ov51x_set_slave_ids(struct usb_ov511 *ov, unsigned char sid)
{
int rc;
down(&ov->i2c_lock);
mutex_lock(&ov->i2c_lock);
rc = i2c_set_slave_internal(ov, sid);
if (rc < 0)
@ -942,7 +942,7 @@ ov51x_set_slave_ids(struct usb_ov511 *ov, unsigned char sid)
// FIXME: Is this actually necessary?
rc = ov51x_reset(ov, OV511_RESET_NOREGS);
out:
up(&ov->i2c_lock);
mutex_unlock(&ov->i2c_lock);
return rc;
}
@ -3832,7 +3832,7 @@ ov51x_alloc(struct usb_ov511 *ov)
const int raw_bufsize = OV511_NUMFRAMES * MAX_RAW_DATA_SIZE(w, h);
PDEBUG(4, "entered");
down(&ov->buf_lock);
mutex_lock(&ov->buf_lock);
if (ov->buf_state == BUF_ALLOCATED)
goto out;
@ -3879,12 +3879,12 @@ ov51x_alloc(struct usb_ov511 *ov)
ov->buf_state = BUF_ALLOCATED;
out:
up(&ov->buf_lock);
mutex_unlock(&ov->buf_lock);
PDEBUG(4, "leaving");
return 0;
error:
ov51x_do_dealloc(ov);
up(&ov->buf_lock);
mutex_unlock(&ov->buf_lock);
PDEBUG(4, "errored");
return -ENOMEM;
}
@ -3893,9 +3893,9 @@ static void
ov51x_dealloc(struct usb_ov511 *ov)
{
PDEBUG(4, "entered");
down(&ov->buf_lock);
mutex_lock(&ov->buf_lock);
ov51x_do_dealloc(ov);
up(&ov->buf_lock);
mutex_unlock(&ov->buf_lock);
PDEBUG(4, "leaving");
}
@ -3914,7 +3914,7 @@ ov51x_v4l1_open(struct inode *inode, struct file *file)
PDEBUG(4, "opening");
down(&ov->lock);
mutex_lock(&ov->lock);
err = -EBUSY;
if (ov->user)
@ -3958,7 +3958,7 @@ ov51x_v4l1_open(struct inode *inode, struct file *file)
ov51x_led_control(ov, 1);
out:
up(&ov->lock);
mutex_unlock(&ov->lock);
return err;
}
@ -3970,7 +3970,7 @@ ov51x_v4l1_close(struct inode *inode, struct file *file)
PDEBUG(4, "ov511_close");
down(&ov->lock);
mutex_lock(&ov->lock);
ov->user--;
ov51x_stop_isoc(ov);
@ -3981,15 +3981,15 @@ ov51x_v4l1_close(struct inode *inode, struct file *file)
if (ov->dev)
ov51x_dealloc(ov);
up(&ov->lock);
mutex_unlock(&ov->lock);
/* Device unplugged while open. Only a minimum of unregistration is done
* here; the disconnect callback already did the rest. */
if (!ov->dev) {
down(&ov->cbuf_lock);
mutex_lock(&ov->cbuf_lock);
kfree(ov->cbuf);
ov->cbuf = NULL;
up(&ov->cbuf_lock);
mutex_unlock(&ov->cbuf_lock);
ov51x_dealloc(ov);
kfree(ov);
@ -4449,12 +4449,12 @@ ov51x_v4l1_ioctl(struct inode *inode, struct file *file,
struct usb_ov511 *ov = video_get_drvdata(vdev);
int rc;
if (down_interruptible(&ov->lock))
if (mutex_lock_interruptible(&ov->lock))
return -EINTR;
rc = video_usercopy(inode, file, cmd, arg, ov51x_v4l1_ioctl_internal);
up(&ov->lock);
mutex_unlock(&ov->lock);
return rc;
}
@ -4468,7 +4468,7 @@ ov51x_v4l1_read(struct file *file, char __user *buf, size_t cnt, loff_t *ppos)
int i, rc = 0, frmx = -1;
struct ov511_frame *frame;
if (down_interruptible(&ov->lock))
if (mutex_lock_interruptible(&ov->lock))
return -EINTR;
PDEBUG(4, "%ld bytes, noblock=%d", count, noblock);
@ -4604,11 +4604,11 @@ restart:
PDEBUG(4, "read finished, returning %ld (sweet)", count);
up(&ov->lock);
mutex_unlock(&ov->lock);
return count;
error:
up(&ov->lock);
mutex_unlock(&ov->lock);
return rc;
}
@ -4631,14 +4631,14 @@ ov51x_v4l1_mmap(struct file *file, struct vm_area_struct *vma)
+ PAGE_SIZE - 1) & ~(PAGE_SIZE - 1))))
return -EINVAL;
if (down_interruptible(&ov->lock))
if (mutex_lock_interruptible(&ov->lock))
return -EINTR;
pos = (unsigned long)ov->fbuf;
while (size > 0) {
page = vmalloc_to_pfn((void *)pos);
if (remap_pfn_range(vma, start, page, PAGE_SIZE, PAGE_SHARED)) {
up(&ov->lock);
mutex_unlock(&ov->lock);
return -EAGAIN;
}
start += PAGE_SIZE;
@ -4649,7 +4649,7 @@ ov51x_v4l1_mmap(struct file *file, struct vm_area_struct *vma)
size = 0;
}
up(&ov->lock);
mutex_unlock(&ov->lock);
return 0;
}
@ -5639,7 +5639,7 @@ static CLASS_DEVICE_ATTR(hue, S_IRUGO, show_hue, NULL);
static ssize_t show_exposure(struct class_device *cd, char *buf)
{
struct usb_ov511 *ov = cd_to_ov(cd);
unsigned char exp;
unsigned char exp = 0;
if (!ov->dev)
return -ENODEV;
@ -5686,13 +5686,11 @@ ov51x_probe(struct usb_interface *intf, const struct usb_device_id *id)
if (idesc->bInterfaceSubClass != 0x00)
return -ENODEV;
if ((ov = kmalloc(sizeof(*ov), GFP_KERNEL)) == NULL) {
if ((ov = kzalloc(sizeof(*ov), GFP_KERNEL)) == NULL) {
err("couldn't kmalloc ov struct");
goto error_out;
}
memset(ov, 0, sizeof(*ov));
ov->dev = dev;
ov->iface = idesc->bInterfaceNumber;
ov->led_policy = led;
@ -5738,11 +5736,10 @@ ov51x_probe(struct usb_interface *intf, const struct usb_device_id *id)
init_waitqueue_head(&ov->wq);
init_MUTEX(&ov->lock); /* to 1 == available */
init_MUTEX(&ov->buf_lock);
init_MUTEX(&ov->param_lock);
init_MUTEX(&ov->i2c_lock);
init_MUTEX(&ov->cbuf_lock);
mutex_init(&ov->lock); /* to 1 == available */
mutex_init(&ov->buf_lock);
mutex_init(&ov->i2c_lock);
mutex_init(&ov->cbuf_lock);
ov->buf_state = BUF_NOT_ALLOCATED;
@ -5833,10 +5830,10 @@ error:
}
if (ov->cbuf) {
down(&ov->cbuf_lock);
mutex_lock(&ov->cbuf_lock);
kfree(ov->cbuf);
ov->cbuf = NULL;
up(&ov->cbuf_lock);
mutex_unlock(&ov->cbuf_lock);
}
kfree(ov);
@ -5881,10 +5878,10 @@ ov51x_disconnect(struct usb_interface *intf)
/* Free the memory */
if (ov && !ov->user) {
down(&ov->cbuf_lock);
mutex_lock(&ov->cbuf_lock);
kfree(ov->cbuf);
ov->cbuf = NULL;
up(&ov->cbuf_lock);
mutex_unlock(&ov->cbuf_lock);
ov51x_dealloc(ov);
kfree(ov);

View File

@ -5,6 +5,7 @@
#include <linux/videodev.h>
#include <linux/smp_lock.h>
#include <linux/usb.h>
#include <linux/mutex.h>
#define OV511_DEBUG /* Turn on debug messages */
@ -435,7 +436,7 @@ struct usb_ov511 {
int led_policy; /* LED: off|on|auto; OV511+ only */
struct semaphore lock; /* Serializes user-accessible operations */
struct mutex lock; /* Serializes user-accessible operations */
int user; /* user count for exclusive use */
int streaming; /* Are we streaming Isochronous? */
@ -473,11 +474,9 @@ struct usb_ov511 {
int packet_size; /* Frame size per isoc desc */
int packet_numbering; /* Is ISO frame numbering enabled? */
struct semaphore param_lock; /* params lock for this camera */
/* Framebuffer/sbuf management */
int buf_state;
struct semaphore buf_lock;
struct mutex buf_lock;
struct ov51x_decomp_ops *decomp_ops;
@ -494,12 +493,12 @@ struct usb_ov511 {
int pal; /* Device is designed for PAL resolution */
/* I2C interface */
struct semaphore i2c_lock; /* Protect I2C controller regs */
struct mutex i2c_lock; /* Protect I2C controller regs */
unsigned char primary_i2c_slave; /* I2C write id of sensor */
/* Control transaction stuff */
unsigned char *cbuf; /* Buffer for payload */
struct semaphore cbuf_lock;
struct mutex cbuf_lock;
};
/* Used to represent a list of values and their respective symbolic names */

View File

@ -41,7 +41,6 @@
#include <asm/uaccess.h>
#endif
#include <asm/errno.h>
#include <linux/version.h>
#include "pwc.h"
#include "pwc-ioctl.h"

View File

@ -62,7 +62,6 @@
#include <linux/poll.h>
#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <linux/version.h>
#include <asm/io.h>
#include "pwc.h"
@ -827,13 +826,10 @@ static int pwc_isoc_init(struct pwc_device *pdev)
/* Get the current alternate interface, adjust packet size */
if (!udev->actconfig)
return -EFAULT;
#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,5)
idesc = &udev->actconfig->interface[0]->altsetting[pdev->valternate];
#else
intf = usb_ifnum_to_if(udev, 0);
if (intf)
idesc = usb_altnum_to_altsetting(intf, pdev->valternate);
#endif
if (!idesc)
return -EFAULT;
@ -1871,12 +1867,11 @@ static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id
Info("Warning: more than 1 configuration available.\n");
/* Allocate structure, initialize pointers, mutexes, etc. and link it to the usb_device */
pdev = kmalloc(sizeof(struct pwc_device), GFP_KERNEL);
pdev = kzalloc(sizeof(struct pwc_device), GFP_KERNEL);
if (pdev == NULL) {
Err("Oops, could not allocate memory for pwc_device.\n");
return -ENOMEM;
}
memset(pdev, 0, sizeof(struct pwc_device));
pdev->type = type_id;
pdev->vsize = default_size;
pdev->vframes = default_fps;

View File

@ -1157,21 +1157,21 @@ static int se401_mmap(struct file *file, struct vm_area_struct *vma)
unsigned long size = vma->vm_end-vma->vm_start;
unsigned long page, pos;
down(&se401->lock);
mutex_lock(&se401->lock);
if (se401->dev == NULL) {
up(&se401->lock);
mutex_unlock(&se401->lock);
return -EIO;
}
if (size > (((SE401_NUMFRAMES * se401->maxframesize) + PAGE_SIZE - 1) & ~(PAGE_SIZE - 1))) {
up(&se401->lock);
mutex_unlock(&se401->lock);
return -EINVAL;
}
pos = (unsigned long)se401->fbuf;
while (size > 0) {
page = vmalloc_to_pfn((void *)pos);
if (remap_pfn_range(vma, start, page, PAGE_SIZE, PAGE_SHARED)) {
up(&se401->lock);
mutex_unlock(&se401->lock);
return -EAGAIN;
}
start += PAGE_SIZE;
@ -1181,7 +1181,7 @@ static int se401_mmap(struct file *file, struct vm_area_struct *vma)
else
size = 0;
}
up(&se401->lock);
mutex_unlock(&se401->lock);
return 0;
}
@ -1345,13 +1345,11 @@ static int se401_probe(struct usb_interface *intf,
/* We found one */
info("SE401 camera found: %s", camera_name);
if ((se401 = kmalloc(sizeof(*se401), GFP_KERNEL)) == NULL) {
if ((se401 = kzalloc(sizeof(*se401), GFP_KERNEL)) == NULL) {
err("couldn't kmalloc se401 struct");
return -ENOMEM;
}
memset(se401, 0, sizeof(*se401));
se401->dev = dev;
se401->iface = interface->bInterfaceNumber;
se401->camera_name = camera_name;
@ -1366,7 +1364,7 @@ static int se401_probe(struct usb_interface *intf,
memcpy(&se401->vdev, &se401_template, sizeof(se401_template));
memcpy(se401->vdev.name, se401->camera_name, strlen(se401->camera_name));
init_waitqueue_head(&se401->wq);
init_MUTEX(&se401->lock);
mutex_init(&se401->lock);
wmb();
if (video_register_device(&se401->vdev, VFL_TYPE_GRABBER, video_nr) == -1) {

View File

@ -5,6 +5,7 @@
#include <asm/uaccess.h>
#include <linux/videodev.h>
#include <linux/smp_lock.h>
#include <linux/mutex.h>
#define se401_DEBUG /* Turn on debug messages */
@ -189,7 +190,7 @@ struct usb_se401 {
int maxframesize;
int cframesize; /* current framesize */
struct semaphore lock;
struct mutex lock;
int user; /* user count for exclusive use */
int removed; /* device disconnected */

View File

@ -33,7 +33,9 @@
#include <linux/types.h>
#include <linux/param.h>
#include <linux/rwsem.h>
#include <asm/semaphore.h>
#include <linux/mutex.h>
#include <linux/string.h>
#include <linux/stddef.h>
#include "sn9c102_sensor.h"
@ -50,6 +52,7 @@
#define SN9C102_ALTERNATE_SETTING 8
#define SN9C102_URB_TIMEOUT msecs_to_jiffies(2 * SN9C102_ISO_PACKETS)
#define SN9C102_CTRL_TIMEOUT 300
#define SN9C102_FRAME_TIMEOUT 2
/*****************************************************************************/
@ -107,16 +110,17 @@ struct sn9c102_sysfs_attr {
struct sn9c102_module_param {
u8 force_munmap;
u16 frame_timeout;
};
static DECLARE_MUTEX(sn9c102_sysfs_lock);
static DEFINE_MUTEX(sn9c102_sysfs_lock);
static DECLARE_RWSEM(sn9c102_disconnect);
struct sn9c102_device {
struct video_device* v4ldev;
enum sn9c102_bridge bridge;
struct sn9c102_sensor* sensor;
struct sn9c102_sensor sensor;
struct usb_device* usbdev;
struct urb* urb[SN9C102_URBS];
@ -141,19 +145,28 @@ struct sn9c102_device {
enum sn9c102_dev_state state;
u8 users;
struct semaphore dev_sem, fileop_sem;
struct mutex dev_mutex, fileop_mutex;
spinlock_t queue_lock;
wait_queue_head_t open, wait_frame, wait_stream;
};
/*****************************************************************************/
struct sn9c102_device*
sn9c102_match_id(struct sn9c102_device* cam, const struct usb_device_id *id)
{
if (usb_match_id(usb_ifnum_to_if(cam->usbdev, 0), id))
return cam;
return NULL;
}
void
sn9c102_attach_sensor(struct sn9c102_device* cam,
struct sn9c102_sensor* sensor)
{
cam->sensor = sensor;
cam->sensor->usbdev = cam->usbdev;
memcpy(&cam->sensor, sensor, sizeof(struct sn9c102_sensor));
}
/*****************************************************************************/
@ -196,7 +209,8 @@ do { \
#undef PDBG
#define PDBG(fmt, args...) \
dev_info(&cam->dev, "[%s:%d] " fmt "\n", __FUNCTION__, __LINE__ , ## args)
dev_info(&cam->usbdev->dev, "[%s:%d] " fmt "\n", \
__FUNCTION__, __LINE__ , ## args)
#undef PDBGG
#define PDBGG(fmt, args...) do {;} while(0) /* placeholder */

View File

@ -25,11 +25,9 @@
#include <linux/moduleparam.h>
#include <linux/errno.h>
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/device.h>
#include <linux/fs.h>
#include <linux/delay.h>
#include <linux/stddef.h>
#include <linux/compiler.h>
#include <linux/ioctl.h>
#include <linux/poll.h>
@ -49,8 +47,8 @@
#define SN9C102_MODULE_AUTHOR "(C) 2004-2006 Luca Risolia"
#define SN9C102_AUTHOR_EMAIL "<luca.risolia@studio.unibo.it>"
#define SN9C102_MODULE_LICENSE "GPL"
#define SN9C102_MODULE_VERSION "1:1.26"
#define SN9C102_MODULE_VERSION_CODE KERNEL_VERSION(1, 0, 26)
#define SN9C102_MODULE_VERSION "1:1.27"
#define SN9C102_MODULE_VERSION_CODE KERNEL_VERSION(1, 0, 27)
/*****************************************************************************/
@ -89,6 +87,15 @@ MODULE_PARM_DESC(force_munmap,
"\nDefault value is "__MODULE_STRING(SN9C102_FORCE_MUNMAP)"."
"\n");
static unsigned int frame_timeout[] = {[0 ... SN9C102_MAX_DEVICES-1] =
SN9C102_FRAME_TIMEOUT};
module_param_array(frame_timeout, uint, NULL, 0644);
MODULE_PARM_DESC(frame_timeout,
"\n<n[,...]> Timeout for a video frame in seconds."
"\nThis parameter is specific for each detected camera."
"\nDefault value is "__MODULE_STRING(SN9C102_FRAME_TIMEOUT)"."
"\n");
#ifdef SN9C102_DEBUG
static unsigned short debug = SN9C102_DEBUG_LEVEL;
module_param(debug, ushort, 0644);
@ -128,8 +135,8 @@ static u32
sn9c102_request_buffers(struct sn9c102_device* cam, u32 count,
enum sn9c102_io_method io)
{
struct v4l2_pix_format* p = &(cam->sensor->pix_format);
struct v4l2_rect* r = &(cam->sensor->cropcap.bounds);
struct v4l2_pix_format* p = &(cam->sensor.pix_format);
struct v4l2_rect* r = &(cam->sensor.cropcap.bounds);
const size_t imagesize = cam->module_param.force_munmap ||
io == IO_READ ?
(p->width * p->height * p->priv) / 8 :
@ -449,19 +456,13 @@ sn9c102_i2c_try_write(struct sn9c102_device* cam,
int sn9c102_i2c_read(struct sn9c102_device* cam, u8 address)
{
if (!cam->sensor)
return -1;
return sn9c102_i2c_try_read(cam, cam->sensor, address);
return sn9c102_i2c_try_read(cam, &cam->sensor, address);
}
int sn9c102_i2c_write(struct sn9c102_device* cam, u8 address, u8 value)
{
if (!cam->sensor)
return -1;
return sn9c102_i2c_try_write(cam, cam->sensor, address, value);
return sn9c102_i2c_try_write(cam, &cam->sensor, address, value);
}
/*****************************************************************************/
@ -505,7 +506,7 @@ sn9c102_find_eof_header(struct sn9c102_device* cam, void* mem, size_t len)
size_t eoflen = sizeof(sn9c102_eof_header_t), i;
unsigned j, n = sizeof(sn9c102_eof_header) / eoflen;
if (cam->sensor->pix_format.pixelformat == V4L2_PIX_FMT_SN9C10X)
if (cam->sensor.pix_format.pixelformat == V4L2_PIX_FMT_SN9C10X)
return NULL; /* EOF header does not exist in compressed data */
for (i = 0; (len >= eoflen) && (i <= len - eoflen); i++)
@ -535,7 +536,7 @@ static void sn9c102_urb_complete(struct urb *urb, struct pt_regs* regs)
if ((*f))
(*f)->state = F_QUEUED;
DBG(3, "Stream interrupted");
wake_up_interruptible(&cam->wait_stream);
wake_up(&cam->wait_stream);
}
if (cam->state & DEV_DISCONNECTED)
@ -553,9 +554,9 @@ static void sn9c102_urb_complete(struct urb *urb, struct pt_regs* regs)
(*f) = list_entry(cam->inqueue.next, struct sn9c102_frame_t,
frame);
imagesize = (cam->sensor->pix_format.width *
cam->sensor->pix_format.height *
cam->sensor->pix_format.priv) / 8;
imagesize = (cam->sensor.pix_format.width *
cam->sensor.pix_format.height *
cam->sensor.pix_format.priv) / 8;
soflen = (cam->bridge) == BRIDGE_SN9C103 ?
sizeof(sn9c103_sof_header_t) :
@ -579,7 +580,7 @@ static void sn9c102_urb_complete(struct urb *urb, struct pt_regs* regs)
redo:
sof = sn9c102_find_sof_header(cam, pos, len);
if (!sof) {
if (likely(!sof)) {
eof = sn9c102_find_eof_header(cam, pos, len);
if ((*f)->state == F_GRABBING) {
end_of_frame:
@ -589,8 +590,9 @@ end_of_frame:
img = (eof > pos) ? eof - pos - 1 : 0;
if ((*f)->buf.bytesused+img > imagesize) {
u32 b = (*f)->buf.bytesused + img -
imagesize;
u32 b;
b = (*f)->buf.bytesused + img -
imagesize;
img = imagesize - (*f)->buf.bytesused;
DBG(3, "Expected EOF not found: "
"video frame cut");
@ -608,9 +610,10 @@ end_of_frame:
(*f)->buf.bytesused += img;
if ((*f)->buf.bytesused == imagesize ||
(cam->sensor->pix_format.pixelformat ==
(cam->sensor.pix_format.pixelformat ==
V4L2_PIX_FMT_SN9C10X && eof)) {
u32 b = (*f)->buf.bytesused;
u32 b;
b = (*f)->buf.bytesused;
(*f)->state = F_DONE;
(*f)->buf.sequence= ++cam->frame_count;
spin_lock(&cam->queue_lock);
@ -667,7 +670,7 @@ start_of_frame:
if (eof && eof < sof)
goto end_of_frame; /* (1) */
else {
if (cam->sensor->pix_format.pixelformat ==
if (cam->sensor.pix_format.pixelformat ==
V4L2_PIX_FMT_SN9C10X) {
eof = sof - soflen;
goto end_of_frame;
@ -808,20 +811,21 @@ static int sn9c102_stop_transfer(struct sn9c102_device* cam)
static int sn9c102_stream_interrupt(struct sn9c102_device* cam)
{
int err = 0;
long timeout;
cam->stream = STREAM_INTERRUPT;
err = wait_event_timeout(cam->wait_stream,
(cam->stream == STREAM_OFF) ||
(cam->state & DEV_DISCONNECTED),
SN9C102_URB_TIMEOUT);
timeout = wait_event_timeout(cam->wait_stream,
(cam->stream == STREAM_OFF) ||
(cam->state & DEV_DISCONNECTED),
SN9C102_URB_TIMEOUT);
if (cam->state & DEV_DISCONNECTED)
return -ENODEV;
else if (err) {
else if (cam->stream != STREAM_OFF) {
cam->state |= DEV_MISCONFIGURED;
DBG(1, "The camera is misconfigured. To use it, close and "
"open /dev/video%d again.", cam->v4ldev->minor);
return err;
DBG(1, "URB timeout reached. The camera is misconfigured. "
"To use it, close and open /dev/video%d again.",
cam->v4ldev->minor);
return -EIO;
}
return 0;
@ -866,18 +870,18 @@ static ssize_t sn9c102_show_reg(struct class_device* cd, char* buf)
struct sn9c102_device* cam;
ssize_t count;
if (down_interruptible(&sn9c102_sysfs_lock))
if (mutex_lock_interruptible(&sn9c102_sysfs_lock))
return -ERESTARTSYS;
cam = video_get_drvdata(to_video_device(cd));
if (!cam) {
up(&sn9c102_sysfs_lock);
mutex_unlock(&sn9c102_sysfs_lock);
return -ENODEV;
}
count = sprintf(buf, "%u\n", cam->sysfs.reg);
up(&sn9c102_sysfs_lock);
mutex_unlock(&sn9c102_sysfs_lock);
return count;
}
@ -890,18 +894,18 @@ sn9c102_store_reg(struct class_device* cd, const char* buf, size_t len)
u8 index;
ssize_t count;
if (down_interruptible(&sn9c102_sysfs_lock))
if (mutex_lock_interruptible(&sn9c102_sysfs_lock))
return -ERESTARTSYS;
cam = video_get_drvdata(to_video_device(cd));
if (!cam) {
up(&sn9c102_sysfs_lock);
mutex_unlock(&sn9c102_sysfs_lock);
return -ENODEV;
}
index = sn9c102_strtou8(buf, len, &count);
if (index > 0x1f || !count) {
up(&sn9c102_sysfs_lock);
mutex_unlock(&sn9c102_sysfs_lock);
return -EINVAL;
}
@ -910,7 +914,7 @@ sn9c102_store_reg(struct class_device* cd, const char* buf, size_t len)
DBG(2, "Moved SN9C10X register index to 0x%02X", cam->sysfs.reg);
DBG(3, "Written bytes: %zd", count);
up(&sn9c102_sysfs_lock);
mutex_unlock(&sn9c102_sysfs_lock);
return count;
}
@ -922,17 +926,17 @@ static ssize_t sn9c102_show_val(struct class_device* cd, char* buf)
ssize_t count;
int val;
if (down_interruptible(&sn9c102_sysfs_lock))
if (mutex_lock_interruptible(&sn9c102_sysfs_lock))
return -ERESTARTSYS;
cam = video_get_drvdata(to_video_device(cd));
if (!cam) {
up(&sn9c102_sysfs_lock);
mutex_unlock(&sn9c102_sysfs_lock);
return -ENODEV;
}
if ((val = sn9c102_read_reg(cam, cam->sysfs.reg)) < 0) {
up(&sn9c102_sysfs_lock);
mutex_unlock(&sn9c102_sysfs_lock);
return -EIO;
}
@ -940,7 +944,7 @@ static ssize_t sn9c102_show_val(struct class_device* cd, char* buf)
DBG(3, "Read bytes: %zd", count);
up(&sn9c102_sysfs_lock);
mutex_unlock(&sn9c102_sysfs_lock);
return count;
}
@ -954,24 +958,24 @@ sn9c102_store_val(struct class_device* cd, const char* buf, size_t len)
ssize_t count;
int err;
if (down_interruptible(&sn9c102_sysfs_lock))
if (mutex_lock_interruptible(&sn9c102_sysfs_lock))
return -ERESTARTSYS;
cam = video_get_drvdata(to_video_device(cd));
if (!cam) {
up(&sn9c102_sysfs_lock);
mutex_unlock(&sn9c102_sysfs_lock);
return -ENODEV;
}
value = sn9c102_strtou8(buf, len, &count);
if (!count) {
up(&sn9c102_sysfs_lock);
mutex_unlock(&sn9c102_sysfs_lock);
return -EINVAL;
}
err = sn9c102_write_reg(cam, value, cam->sysfs.reg);
if (err) {
up(&sn9c102_sysfs_lock);
mutex_unlock(&sn9c102_sysfs_lock);
return -EIO;
}
@ -979,7 +983,7 @@ sn9c102_store_val(struct class_device* cd, const char* buf, size_t len)
cam->sysfs.reg, value);
DBG(3, "Written bytes: %zd", count);
up(&sn9c102_sysfs_lock);
mutex_unlock(&sn9c102_sysfs_lock);
return count;
}
@ -990,12 +994,12 @@ static ssize_t sn9c102_show_i2c_reg(struct class_device* cd, char* buf)
struct sn9c102_device* cam;
ssize_t count;
if (down_interruptible(&sn9c102_sysfs_lock))
if (mutex_lock_interruptible(&sn9c102_sysfs_lock))
return -ERESTARTSYS;
cam = video_get_drvdata(to_video_device(cd));
if (!cam) {
up(&sn9c102_sysfs_lock);
mutex_unlock(&sn9c102_sysfs_lock);
return -ENODEV;
}
@ -1003,7 +1007,7 @@ static ssize_t sn9c102_show_i2c_reg(struct class_device* cd, char* buf)
DBG(3, "Read bytes: %zd", count);
up(&sn9c102_sysfs_lock);
mutex_unlock(&sn9c102_sysfs_lock);
return count;
}
@ -1016,18 +1020,18 @@ sn9c102_store_i2c_reg(struct class_device* cd, const char* buf, size_t len)
u8 index;
ssize_t count;
if (down_interruptible(&sn9c102_sysfs_lock))
if (mutex_lock_interruptible(&sn9c102_sysfs_lock))
return -ERESTARTSYS;
cam = video_get_drvdata(to_video_device(cd));
if (!cam) {
up(&sn9c102_sysfs_lock);
mutex_unlock(&sn9c102_sysfs_lock);
return -ENODEV;
}
index = sn9c102_strtou8(buf, len, &count);
if (!count) {
up(&sn9c102_sysfs_lock);
mutex_unlock(&sn9c102_sysfs_lock);
return -EINVAL;
}
@ -1036,7 +1040,7 @@ sn9c102_store_i2c_reg(struct class_device* cd, const char* buf, size_t len)
DBG(2, "Moved sensor register index to 0x%02X", cam->sysfs.i2c_reg);
DBG(3, "Written bytes: %zd", count);
up(&sn9c102_sysfs_lock);
mutex_unlock(&sn9c102_sysfs_lock);
return count;
}
@ -1048,22 +1052,22 @@ static ssize_t sn9c102_show_i2c_val(struct class_device* cd, char* buf)
ssize_t count;
int val;
if (down_interruptible(&sn9c102_sysfs_lock))
if (mutex_lock_interruptible(&sn9c102_sysfs_lock))
return -ERESTARTSYS;
cam = video_get_drvdata(to_video_device(cd));
if (!cam) {
up(&sn9c102_sysfs_lock);
mutex_unlock(&sn9c102_sysfs_lock);
return -ENODEV;
}
if (!(cam->sensor->sysfs_ops & SN9C102_I2C_READ)) {
up(&sn9c102_sysfs_lock);
if (!(cam->sensor.sysfs_ops & SN9C102_I2C_READ)) {
mutex_unlock(&sn9c102_sysfs_lock);
return -ENOSYS;
}
if ((val = sn9c102_i2c_read(cam, cam->sysfs.i2c_reg)) < 0) {
up(&sn9c102_sysfs_lock);
mutex_unlock(&sn9c102_sysfs_lock);
return -EIO;
}
@ -1071,7 +1075,7 @@ static ssize_t sn9c102_show_i2c_val(struct class_device* cd, char* buf)
DBG(3, "Read bytes: %zd", count);
up(&sn9c102_sysfs_lock);
mutex_unlock(&sn9c102_sysfs_lock);
return count;
}
@ -1085,29 +1089,29 @@ sn9c102_store_i2c_val(struct class_device* cd, const char* buf, size_t len)
ssize_t count;
int err;
if (down_interruptible(&sn9c102_sysfs_lock))
if (mutex_lock_interruptible(&sn9c102_sysfs_lock))
return -ERESTARTSYS;
cam = video_get_drvdata(to_video_device(cd));
if (!cam) {
up(&sn9c102_sysfs_lock);
mutex_unlock(&sn9c102_sysfs_lock);
return -ENODEV;
}
if (!(cam->sensor->sysfs_ops & SN9C102_I2C_WRITE)) {
up(&sn9c102_sysfs_lock);
if (!(cam->sensor.sysfs_ops & SN9C102_I2C_WRITE)) {
mutex_unlock(&sn9c102_sysfs_lock);
return -ENOSYS;
}
value = sn9c102_strtou8(buf, len, &count);
if (!count) {
up(&sn9c102_sysfs_lock);
mutex_unlock(&sn9c102_sysfs_lock);
return -EINVAL;
}
err = sn9c102_i2c_write(cam, cam->sysfs.i2c_reg, value);
if (err) {
up(&sn9c102_sysfs_lock);
mutex_unlock(&sn9c102_sysfs_lock);
return -EIO;
}
@ -1115,7 +1119,7 @@ sn9c102_store_i2c_val(struct class_device* cd, const char* buf, size_t len)
cam->sysfs.i2c_reg, value);
DBG(3, "Written bytes: %zd", count);
up(&sn9c102_sysfs_lock);
mutex_unlock(&sn9c102_sysfs_lock);
return count;
}
@ -1130,18 +1134,18 @@ sn9c102_store_green(struct class_device* cd, const char* buf, size_t len)
u8 value;
ssize_t count;
if (down_interruptible(&sn9c102_sysfs_lock))
if (mutex_lock_interruptible(&sn9c102_sysfs_lock))
return -ERESTARTSYS;
cam = video_get_drvdata(to_video_device(cd));
if (!cam) {
up(&sn9c102_sysfs_lock);
mutex_unlock(&sn9c102_sysfs_lock);
return -ENODEV;
}
bridge = cam->bridge;
up(&sn9c102_sysfs_lock);
mutex_unlock(&sn9c102_sysfs_lock);
value = sn9c102_strtou8(buf, len, &count);
if (!count)
@ -1249,7 +1253,7 @@ static void sn9c102_create_sysfs(struct sn9c102_device* cam)
video_device_create_file(v4ldev, &class_device_attr_blue);
video_device_create_file(v4ldev, &class_device_attr_red);
}
if (cam->sensor && cam->sensor->sysfs_ops) {
if (cam->sensor.sysfs_ops) {
video_device_create_file(v4ldev, &class_device_attr_i2c_reg);
video_device_create_file(v4ldev, &class_device_attr_i2c_val);
}
@ -1312,7 +1316,7 @@ static int sn9c102_set_scale(struct sn9c102_device* cam, u8 scale)
static int sn9c102_set_crop(struct sn9c102_device* cam, struct v4l2_rect* rect)
{
struct sn9c102_sensor* s = cam->sensor;
struct sn9c102_sensor* s = &cam->sensor;
u8 h_start = (u8)(rect->left - s->cropcap.bounds.left),
v_start = (u8)(rect->top - s->cropcap.bounds.top),
h_size = (u8)(rect->width / 16),
@ -1335,7 +1339,7 @@ static int sn9c102_set_crop(struct sn9c102_device* cam, struct v4l2_rect* rect)
static int sn9c102_init(struct sn9c102_device* cam)
{
struct sn9c102_sensor* s = cam->sensor;
struct sn9c102_sensor* s = &cam->sensor;
struct v4l2_control ctrl;
struct v4l2_queryctrl *qctrl;
struct v4l2_rect* rect;
@ -1404,7 +1408,7 @@ static int sn9c102_init(struct sn9c102_device* cam)
}
if (!(cam->state & DEV_INITIALIZED)) {
init_MUTEX(&cam->fileop_sem);
mutex_init(&cam->fileop_mutex);
spin_lock_init(&cam->queue_lock);
init_waitqueue_head(&cam->wait_frame);
init_waitqueue_head(&cam->wait_stream);
@ -1422,13 +1426,15 @@ static int sn9c102_init(struct sn9c102_device* cam)
static void sn9c102_release_resources(struct sn9c102_device* cam)
{
down(&sn9c102_sysfs_lock);
mutex_lock(&sn9c102_sysfs_lock);
DBG(2, "V4L2 device /dev/video%d deregistered", cam->v4ldev->minor);
video_set_drvdata(cam->v4ldev, NULL);
video_unregister_device(cam->v4ldev);
up(&sn9c102_sysfs_lock);
usb_put_dev(cam->usbdev);
mutex_unlock(&sn9c102_sysfs_lock);
kfree(cam->control_buffer);
}
@ -1449,7 +1455,7 @@ static int sn9c102_open(struct inode* inode, struct file* filp)
cam = video_get_drvdata(video_devdata(filp));
if (down_interruptible(&cam->dev_sem)) {
if (mutex_lock_interruptible(&cam->dev_mutex)) {
up_read(&sn9c102_disconnect);
return -ERESTARTSYS;
}
@ -1461,7 +1467,7 @@ static int sn9c102_open(struct inode* inode, struct file* filp)
err = -EWOULDBLOCK;
goto out;
}
up(&cam->dev_sem);
mutex_unlock(&cam->dev_mutex);
err = wait_event_interruptible_exclusive(cam->open,
cam->state & DEV_DISCONNECTED
|| !cam->users);
@ -1473,7 +1479,7 @@ static int sn9c102_open(struct inode* inode, struct file* filp)
up_read(&sn9c102_disconnect);
return -ENODEV;
}
down(&cam->dev_sem);
mutex_lock(&cam->dev_mutex);
}
@ -1501,7 +1507,7 @@ static int sn9c102_open(struct inode* inode, struct file* filp)
DBG(3, "Video device /dev/video%d is open", cam->v4ldev->minor);
out:
up(&cam->dev_sem);
mutex_unlock(&cam->dev_mutex);
up_read(&sn9c102_disconnect);
return err;
}
@ -1511,7 +1517,7 @@ static int sn9c102_release(struct inode* inode, struct file* filp)
{
struct sn9c102_device* cam = video_get_drvdata(video_devdata(filp));
down(&cam->dev_sem); /* prevent disconnect() to be called */
mutex_lock(&cam->dev_mutex); /* prevent disconnect() to be called */
sn9c102_stop_transfer(cam);
@ -1519,7 +1525,7 @@ static int sn9c102_release(struct inode* inode, struct file* filp)
if (cam->state & DEV_DISCONNECTED) {
sn9c102_release_resources(cam);
up(&cam->dev_sem);
mutex_unlock(&cam->dev_mutex);
kfree(cam);
return 0;
}
@ -1529,7 +1535,7 @@ static int sn9c102_release(struct inode* inode, struct file* filp)
DBG(3, "Video device /dev/video%d closed", cam->v4ldev->minor);
up(&cam->dev_sem);
mutex_unlock(&cam->dev_mutex);
return 0;
}
@ -1541,35 +1547,36 @@ sn9c102_read(struct file* filp, char __user * buf, size_t count, loff_t* f_pos)
struct sn9c102_device* cam = video_get_drvdata(video_devdata(filp));
struct sn9c102_frame_t* f, * i;
unsigned long lock_flags;
long timeout;
int err = 0;
if (down_interruptible(&cam->fileop_sem))
if (mutex_lock_interruptible(&cam->fileop_mutex))
return -ERESTARTSYS;
if (cam->state & DEV_DISCONNECTED) {
DBG(1, "Device not present");
up(&cam->fileop_sem);
mutex_unlock(&cam->fileop_mutex);
return -ENODEV;
}
if (cam->state & DEV_MISCONFIGURED) {
DBG(1, "The camera is misconfigured. Close and open it "
"again.");
up(&cam->fileop_sem);
mutex_unlock(&cam->fileop_mutex);
return -EIO;
}
if (cam->io == IO_MMAP) {
DBG(3, "Close and open the device again to choose "
"the read method");
up(&cam->fileop_sem);
mutex_unlock(&cam->fileop_mutex);
return -EINVAL;
}
if (cam->io == IO_NONE) {
if (!sn9c102_request_buffers(cam,cam->nreadbuffers, IO_READ)) {
DBG(1, "read() failed, not enough memory");
up(&cam->fileop_sem);
mutex_unlock(&cam->fileop_mutex);
return -ENOMEM;
}
cam->io = IO_READ;
@ -1583,30 +1590,32 @@ sn9c102_read(struct file* filp, char __user * buf, size_t count, loff_t* f_pos)
}
if (!count) {
up(&cam->fileop_sem);
mutex_unlock(&cam->fileop_mutex);
return 0;
}
if (list_empty(&cam->outqueue)) {
if (filp->f_flags & O_NONBLOCK) {
up(&cam->fileop_sem);
mutex_unlock(&cam->fileop_mutex);
return -EAGAIN;
}
err = wait_event_interruptible
( cam->wait_frame,
(!list_empty(&cam->outqueue)) ||
(cam->state & DEV_DISCONNECTED) ||
(cam->state & DEV_MISCONFIGURED) );
if (err) {
up(&cam->fileop_sem);
return err;
timeout = wait_event_interruptible_timeout
( cam->wait_frame,
(!list_empty(&cam->outqueue)) ||
(cam->state & DEV_DISCONNECTED) ||
(cam->state & DEV_MISCONFIGURED),
cam->module_param.frame_timeout *
1000 * msecs_to_jiffies(1) );
if (timeout < 0) {
mutex_unlock(&cam->fileop_mutex);
return timeout;
}
if (cam->state & DEV_DISCONNECTED) {
up(&cam->fileop_sem);
mutex_unlock(&cam->fileop_mutex);
return -ENODEV;
}
if (cam->state & DEV_MISCONFIGURED) {
up(&cam->fileop_sem);
if (!timeout || (cam->state & DEV_MISCONFIGURED)) {
mutex_unlock(&cam->fileop_mutex);
return -EIO;
}
}
@ -1634,7 +1643,7 @@ exit:
PDBGG("Frame #%lu, bytes read: %zu",
(unsigned long)f->buf.index, count);
up(&cam->fileop_sem);
mutex_unlock(&cam->fileop_mutex);
return count;
}
@ -1647,7 +1656,7 @@ static unsigned int sn9c102_poll(struct file *filp, poll_table *wait)
unsigned long lock_flags;
unsigned int mask = 0;
if (down_interruptible(&cam->fileop_sem))
if (mutex_lock_interruptible(&cam->fileop_mutex))
return POLLERR;
if (cam->state & DEV_DISCONNECTED) {
@ -1685,12 +1694,12 @@ static unsigned int sn9c102_poll(struct file *filp, poll_table *wait)
if (!list_empty(&cam->outqueue))
mask |= POLLIN | POLLRDNORM;
up(&cam->fileop_sem);
mutex_unlock(&cam->fileop_mutex);
return mask;
error:
up(&cam->fileop_sem);
mutex_unlock(&cam->fileop_mutex);
return POLLERR;
}
@ -1724,25 +1733,25 @@ static int sn9c102_mmap(struct file* filp, struct vm_area_struct *vma)
void *pos;
u32 i;
if (down_interruptible(&cam->fileop_sem))
if (mutex_lock_interruptible(&cam->fileop_mutex))
return -ERESTARTSYS;
if (cam->state & DEV_DISCONNECTED) {
DBG(1, "Device not present");
up(&cam->fileop_sem);
mutex_unlock(&cam->fileop_mutex);
return -ENODEV;
}
if (cam->state & DEV_MISCONFIGURED) {
DBG(1, "The camera is misconfigured. Close and open it "
"again.");
up(&cam->fileop_sem);
mutex_unlock(&cam->fileop_mutex);
return -EIO;
}
if (cam->io != IO_MMAP || !(vma->vm_flags & VM_WRITE) ||
size != PAGE_ALIGN(cam->frame[0].buf.length)) {
up(&cam->fileop_sem);
mutex_unlock(&cam->fileop_mutex);
return -EINVAL;
}
@ -1751,7 +1760,7 @@ static int sn9c102_mmap(struct file* filp, struct vm_area_struct *vma)
break;
}
if (i == cam->nbuffers) {
up(&cam->fileop_sem);
mutex_unlock(&cam->fileop_mutex);
return -EINVAL;
}
@ -1761,7 +1770,7 @@ static int sn9c102_mmap(struct file* filp, struct vm_area_struct *vma)
pos = cam->frame[i].bufmem;
while (size > 0) { /* size is page-aligned */
if (vm_insert_page(vma, start, vmalloc_to_page(pos))) {
up(&cam->fileop_sem);
mutex_unlock(&cam->fileop_mutex);
return -EAGAIN;
}
start += PAGE_SIZE;
@ -1774,7 +1783,7 @@ static int sn9c102_mmap(struct file* filp, struct vm_area_struct *vma)
sn9c102_vm_open(vma);
up(&cam->fileop_sem);
mutex_unlock(&cam->fileop_mutex);
return 0;
}
@ -1816,6 +1825,7 @@ sn9c102_vidioc_enuminput(struct sn9c102_device* cam, void __user * arg)
memset(&i, 0, sizeof(i));
strcpy(i.name, "Camera");
i.type = V4L2_INPUT_TYPE_CAMERA;
if (copy_to_user(arg, &i, sizeof(i)))
return -EFAULT;
@ -1825,7 +1835,19 @@ sn9c102_vidioc_enuminput(struct sn9c102_device* cam, void __user * arg)
static int
sn9c102_vidioc_gs_input(struct sn9c102_device* cam, void __user * arg)
sn9c102_vidioc_g_input(struct sn9c102_device* cam, void __user * arg)
{
int index = 0;
if (copy_to_user(arg, &index, sizeof(index)))
return -EFAULT;
return 0;
}
static int
sn9c102_vidioc_s_input(struct sn9c102_device* cam, void __user * arg)
{
int index;
@ -1842,7 +1864,7 @@ sn9c102_vidioc_gs_input(struct sn9c102_device* cam, void __user * arg)
static int
sn9c102_vidioc_query_ctrl(struct sn9c102_device* cam, void __user * arg)
{
struct sn9c102_sensor* s = cam->sensor;
struct sn9c102_sensor* s = &cam->sensor;
struct v4l2_queryctrl qc;
u8 i;
@ -1864,7 +1886,7 @@ sn9c102_vidioc_query_ctrl(struct sn9c102_device* cam, void __user * arg)
static int
sn9c102_vidioc_g_ctrl(struct sn9c102_device* cam, void __user * arg)
{
struct sn9c102_sensor* s = cam->sensor;
struct sn9c102_sensor* s = &cam->sensor;
struct v4l2_control ctrl;
int err = 0;
u8 i;
@ -1896,7 +1918,7 @@ exit:
static int
sn9c102_vidioc_s_ctrl(struct sn9c102_device* cam, void __user * arg)
{
struct sn9c102_sensor* s = cam->sensor;
struct sn9c102_sensor* s = &cam->sensor;
struct v4l2_control ctrl;
u8 i;
int err = 0;
@ -1909,6 +1931,8 @@ sn9c102_vidioc_s_ctrl(struct sn9c102_device* cam, void __user * arg)
for (i = 0; i < ARRAY_SIZE(s->qctrl); i++)
if (ctrl.id == s->qctrl[i].id) {
if (s->qctrl[i].flags & V4L2_CTRL_FLAG_DISABLED)
return -EINVAL;
if (ctrl.value < s->qctrl[i].minimum ||
ctrl.value > s->qctrl[i].maximum)
return -ERANGE;
@ -1931,7 +1955,7 @@ sn9c102_vidioc_s_ctrl(struct sn9c102_device* cam, void __user * arg)
static int
sn9c102_vidioc_cropcap(struct sn9c102_device* cam, void __user * arg)
{
struct v4l2_cropcap* cc = &(cam->sensor->cropcap);
struct v4l2_cropcap* cc = &(cam->sensor.cropcap);
cc->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
cc->pixelaspect.numerator = 1;
@ -1947,7 +1971,7 @@ sn9c102_vidioc_cropcap(struct sn9c102_device* cam, void __user * arg)
static int
sn9c102_vidioc_g_crop(struct sn9c102_device* cam, void __user * arg)
{
struct sn9c102_sensor* s = cam->sensor;
struct sn9c102_sensor* s = &cam->sensor;
struct v4l2_crop crop = {
.type = V4L2_BUF_TYPE_VIDEO_CAPTURE,
};
@ -1964,7 +1988,7 @@ sn9c102_vidioc_g_crop(struct sn9c102_device* cam, void __user * arg)
static int
sn9c102_vidioc_s_crop(struct sn9c102_device* cam, void __user * arg)
{
struct sn9c102_sensor* s = cam->sensor;
struct sn9c102_sensor* s = &cam->sensor;
struct v4l2_crop crop;
struct v4l2_rect* rect;
struct v4l2_rect* bounds = &(s->cropcap.bounds);
@ -2105,7 +2129,7 @@ static int
sn9c102_vidioc_g_fmt(struct sn9c102_device* cam, void __user * arg)
{
struct v4l2_format format;
struct v4l2_pix_format* pfmt = &(cam->sensor->pix_format);
struct v4l2_pix_format* pfmt = &(cam->sensor.pix_format);
if (copy_from_user(&format, arg, sizeof(format)))
return -EFAULT;
@ -2130,7 +2154,7 @@ static int
sn9c102_vidioc_try_s_fmt(struct sn9c102_device* cam, unsigned int cmd,
void __user * arg)
{
struct sn9c102_sensor* s = cam->sensor;
struct sn9c102_sensor* s = &cam->sensor;
struct v4l2_format format;
struct v4l2_pix_format* pix;
struct v4l2_pix_format* pfmt = &(s->pix_format);
@ -2417,7 +2441,7 @@ sn9c102_vidioc_dqbuf(struct sn9c102_device* cam, struct file* filp,
struct v4l2_buffer b;
struct sn9c102_frame_t *f;
unsigned long lock_flags;
int err = 0;
long timeout;
if (copy_from_user(&b, arg, sizeof(b)))
return -EFAULT;
@ -2430,16 +2454,18 @@ sn9c102_vidioc_dqbuf(struct sn9c102_device* cam, struct file* filp,
return -EINVAL;
if (filp->f_flags & O_NONBLOCK)
return -EAGAIN;
err = wait_event_interruptible
( cam->wait_frame,
(!list_empty(&cam->outqueue)) ||
(cam->state & DEV_DISCONNECTED) ||
(cam->state & DEV_MISCONFIGURED) );
if (err)
return err;
timeout = wait_event_interruptible_timeout
( cam->wait_frame,
(!list_empty(&cam->outqueue)) ||
(cam->state & DEV_DISCONNECTED) ||
(cam->state & DEV_MISCONFIGURED),
cam->module_param.frame_timeout *
1000 * msecs_to_jiffies(1) );
if (timeout < 0)
return timeout;
if (cam->state & DEV_DISCONNECTED)
return -ENODEV;
if (cam->state & DEV_MISCONFIGURED)
if (!timeout || (cam->state & DEV_MISCONFIGURED))
return -EIO;
}
@ -2571,8 +2597,10 @@ static int sn9c102_ioctl_v4l2(struct inode* inode, struct file* filp,
return sn9c102_vidioc_enuminput(cam, arg);
case VIDIOC_G_INPUT:
return sn9c102_vidioc_g_input(cam, arg);
case VIDIOC_S_INPUT:
return sn9c102_vidioc_gs_input(cam, arg);
return sn9c102_vidioc_s_input(cam, arg);
case VIDIOC_QUERYCTRL:
return sn9c102_vidioc_query_ctrl(cam, arg);
@ -2655,19 +2683,19 @@ static int sn9c102_ioctl(struct inode* inode, struct file* filp,
struct sn9c102_device* cam = video_get_drvdata(video_devdata(filp));
int err = 0;
if (down_interruptible(&cam->fileop_sem))
if (mutex_lock_interruptible(&cam->fileop_mutex))
return -ERESTARTSYS;
if (cam->state & DEV_DISCONNECTED) {
DBG(1, "Device not present");
up(&cam->fileop_sem);
mutex_unlock(&cam->fileop_mutex);
return -ENODEV;
}
if (cam->state & DEV_MISCONFIGURED) {
DBG(1, "The camera is misconfigured. Close and open it "
"again.");
up(&cam->fileop_sem);
mutex_unlock(&cam->fileop_mutex);
return -EIO;
}
@ -2675,7 +2703,7 @@ static int sn9c102_ioctl(struct inode* inode, struct file* filp,
err = sn9c102_ioctl_v4l2(inode, filp, cmd, (void __user *)arg);
up(&cam->fileop_sem);
mutex_unlock(&cam->fileop_mutex);
return err;
}
@ -2722,7 +2750,7 @@ sn9c102_usb_probe(struct usb_interface* intf, const struct usb_device_id* id)
goto fail;
}
init_MUTEX(&cam->dev_sem);
mutex_init(&cam->dev_mutex);
r = sn9c102_read_reg(cam, 0x00);
if (r < 0 || r != 0x10) {
@ -2752,10 +2780,10 @@ sn9c102_usb_probe(struct usb_interface* intf, const struct usb_device_id* id)
break;
}
if (!err && cam->sensor) {
DBG(2, "%s image sensor detected", cam->sensor->name);
if (!err) {
DBG(2, "%s image sensor detected", cam->sensor.name);
DBG(3, "Support for %s maintained by %s",
cam->sensor->name, cam->sensor->maintainer);
cam->sensor.name, cam->sensor.maintainer);
} else {
DBG(1, "No supported image sensor detected");
err = -ENODEV;
@ -2776,7 +2804,7 @@ sn9c102_usb_probe(struct usb_interface* intf, const struct usb_device_id* id)
cam->v4ldev->release = video_device_release;
video_set_drvdata(cam->v4ldev, cam);
down(&cam->dev_sem);
mutex_lock(&cam->dev_mutex);
err = video_register_device(cam->v4ldev, VFL_TYPE_GRABBER,
video_nr[dev_nr]);
@ -2786,13 +2814,14 @@ sn9c102_usb_probe(struct usb_interface* intf, const struct usb_device_id* id)
DBG(1, "Free /dev/videoX node not found");
video_nr[dev_nr] = -1;
dev_nr = (dev_nr < SN9C102_MAX_DEVICES-1) ? dev_nr+1 : 0;
up(&cam->dev_sem);
mutex_unlock(&cam->dev_mutex);
goto fail;
}
DBG(2, "V4L2 device registered as /dev/video%d", cam->v4ldev->minor);
cam->module_param.force_munmap = force_munmap[dev_nr];
cam->module_param.frame_timeout = frame_timeout[dev_nr];
dev_nr = (dev_nr < SN9C102_MAX_DEVICES-1) ? dev_nr+1 : 0;
@ -2803,7 +2832,7 @@ sn9c102_usb_probe(struct usb_interface* intf, const struct usb_device_id* id)
usb_set_intfdata(intf, cam);
up(&cam->dev_sem);
mutex_unlock(&cam->dev_mutex);
return 0;
@ -2827,7 +2856,7 @@ static void sn9c102_usb_disconnect(struct usb_interface* intf)
down_write(&sn9c102_disconnect);
down(&cam->dev_sem);
mutex_lock(&cam->dev_mutex);
DBG(2, "Disconnecting %s...", cam->v4ldev->name);
@ -2841,13 +2870,14 @@ static void sn9c102_usb_disconnect(struct usb_interface* intf)
sn9c102_stop_transfer(cam);
cam->state |= DEV_DISCONNECTED;
wake_up_interruptible(&cam->wait_frame);
wake_up_interruptible(&cam->wait_stream);
wake_up(&cam->wait_stream);
usb_get_dev(cam->usbdev);
} else {
cam->state |= DEV_DISCONNECTED;
sn9c102_release_resources(cam);
}
up(&cam->dev_sem);
mutex_unlock(&cam->dev_mutex);
if (!cam->users)
kfree(cam);

View File

@ -34,8 +34,8 @@ static int ov7630_init(struct sn9c102_device* cam)
err += sn9c102_write_reg(cam, 0x0f, 0x18);
err += sn9c102_write_reg(cam, 0x50, 0x19);
err += sn9c102_i2c_write(cam, 0x12, 0x8d);
err += sn9c102_i2c_write(cam, 0x11, 0x00);
err += sn9c102_i2c_write(cam, 0x12, 0x80);
err += sn9c102_i2c_write(cam, 0x11, 0x01);
err += sn9c102_i2c_write(cam, 0x15, 0x34);
err += sn9c102_i2c_write(cam, 0x16, 0x03);
err += sn9c102_i2c_write(cam, 0x17, 0x1c);
@ -43,12 +43,14 @@ static int ov7630_init(struct sn9c102_device* cam)
err += sn9c102_i2c_write(cam, 0x19, 0x06);
err += sn9c102_i2c_write(cam, 0x1a, 0xf6);
err += sn9c102_i2c_write(cam, 0x1b, 0x04);
err += sn9c102_i2c_write(cam, 0x20, 0x44);
err += sn9c102_i2c_write(cam, 0x20, 0xf6);
err += sn9c102_i2c_write(cam, 0x23, 0xee);
err += sn9c102_i2c_write(cam, 0x26, 0xa0);
err += sn9c102_i2c_write(cam, 0x27, 0x9a);
err += sn9c102_i2c_write(cam, 0x28, 0x20);
err += sn9c102_i2c_write(cam, 0x28, 0xa0);
err += sn9c102_i2c_write(cam, 0x29, 0x30);
err += sn9c102_i2c_write(cam, 0x2a, 0xa0);
err += sn9c102_i2c_write(cam, 0x2b, 0x1f);
err += sn9c102_i2c_write(cam, 0x2f, 0x3d);
err += sn9c102_i2c_write(cam, 0x30, 0x24);
err += sn9c102_i2c_write(cam, 0x32, 0x86);
@ -80,7 +82,7 @@ static int ov7630_set_ctrl(struct sn9c102_device* cam,
err += sn9c102_i2c_write(cam, 0x02, ctrl->value);
break;
case V4L2_CID_BLUE_BALANCE:
err += sn9c102_i2c_write(cam, 0x03, ctrl->value);
err += sn9c102_i2c_write(cam, 0x01, ctrl->value);
break;
case V4L2_CID_GAIN:
err += sn9c102_i2c_write(cam, 0x00, ctrl->value);
@ -108,7 +110,7 @@ static int ov7630_set_ctrl(struct sn9c102_device* cam,
err += sn9c102_i2c_write(cam, 0x0d, ctrl->value);
break;
case V4L2_CID_AUTO_WHITE_BALANCE:
err += sn9c102_i2c_write(cam, 0x12, (ctrl->value << 2) | 0x09);
err += sn9c102_i2c_write(cam, 0x12, (ctrl->value << 2) | 0x78);
break;
case V4L2_CID_AUTOGAIN:
err += sn9c102_i2c_write(cam, 0x13, ctrl->value);
@ -371,26 +373,29 @@ static struct sn9c102_sensor ov7630 = {
int sn9c102_probe_ov7630(struct sn9c102_device* cam)
{
const struct usb_device_id ov7630_id_table[] = {
{ USB_DEVICE(0x0c45, 0x602c), },
{ USB_DEVICE(0x0c45, 0x602d), },
{ USB_DEVICE(0x0c45, 0x608f), },
{ USB_DEVICE(0x0c45, 0x60b0), },
{ }
};
int err = 0;
sn9c102_attach_sensor(cam, &ov7630);
if (le16_to_cpu(ov7630.usbdev->descriptor.idProduct) != 0x602c &&
le16_to_cpu(ov7630.usbdev->descriptor.idProduct) != 0x602d &&
le16_to_cpu(ov7630.usbdev->descriptor.idProduct) != 0x608f &&
le16_to_cpu(ov7630.usbdev->descriptor.idProduct) != 0x60b0)
if (!sn9c102_match_id(cam, ov7630_id_table))
return -ENODEV;
err += sn9c102_write_reg(cam, 0x01, 0x01);
err += sn9c102_write_reg(cam, 0x00, 0x01);
err += sn9c102_write_reg(cam, 0x28, 0x17);
if (err)
return -EIO;
err += sn9c102_i2c_write(cam, 0x0b, 0);
err += sn9c102_i2c_try_write(cam, &ov7630, 0x0b, 0);
if (err)
return -ENODEV;
sn9c102_attach_sensor(cam, &ov7630);
return 0;
}

View File

@ -0,0 +1,238 @@
/***************************************************************************
* Plug-in for PAS202BCA image sensor connected to the SN9C10x PC Camera *
* Controllers *
* *
* Copyright (C) 2006 by Luca Risolia <luca.risolia@studio.unibo.it> *
* *
* This program is free software; you can redistribute it and/or modify *
* it under the terms of the GNU General Public License as published by *
* the Free Software Foundation; either version 2 of the License, or *
* (at your option) any later version. *
* *
* This program is distributed in the hope that it will be useful, *
* but WITHOUT ANY WARRANTY; without even the implied warranty of *
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
* GNU General Public License for more details. *
* *
* You should have received a copy of the GNU General Public License *
* along with this program; if not, write to the Free Software *
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. *
***************************************************************************/
#include <linux/delay.h>
#include "sn9c102_sensor.h"
static struct sn9c102_sensor pas202bca;
static int pas202bca_init(struct sn9c102_device* cam)
{
int err = 0;
err += sn9c102_write_reg(cam, 0x00, 0x10);
err += sn9c102_write_reg(cam, 0x00, 0x11);
err += sn9c102_write_reg(cam, 0x00, 0x14);
err += sn9c102_write_reg(cam, 0x20, 0x17);
err += sn9c102_write_reg(cam, 0x30, 0x19);
err += sn9c102_write_reg(cam, 0x09, 0x18);
err += sn9c102_i2c_write(cam, 0x02, 0x14);
err += sn9c102_i2c_write(cam, 0x03, 0x40);
err += sn9c102_i2c_write(cam, 0x0d, 0x2c);
err += sn9c102_i2c_write(cam, 0x0e, 0x01);
err += sn9c102_i2c_write(cam, 0x0f, 0xa9);
err += sn9c102_i2c_write(cam, 0x10, 0x08);
err += sn9c102_i2c_write(cam, 0x13, 0x63);
err += sn9c102_i2c_write(cam, 0x15, 0x70);
err += sn9c102_i2c_write(cam, 0x11, 0x01);
msleep(400);
return err;
}
static int pas202bca_set_pix_format(struct sn9c102_device* cam,
const struct v4l2_pix_format* pix)
{
int err = 0;
if (pix->pixelformat == V4L2_PIX_FMT_SN9C10X)
err += sn9c102_write_reg(cam, 0x24, 0x17);
else
err += sn9c102_write_reg(cam, 0x20, 0x17);
return err;
}
static int pas202bca_set_ctrl(struct sn9c102_device* cam,
const struct v4l2_control* ctrl)
{
int err = 0;
switch (ctrl->id) {
case V4L2_CID_EXPOSURE:
err += sn9c102_i2c_write(cam, 0x04, ctrl->value >> 6);
err += sn9c102_i2c_write(cam, 0x05, ctrl->value & 0x3f);
break;
case V4L2_CID_RED_BALANCE:
err += sn9c102_i2c_write(cam, 0x09, ctrl->value);
break;
case V4L2_CID_BLUE_BALANCE:
err += sn9c102_i2c_write(cam, 0x07, ctrl->value);
break;
case V4L2_CID_GAIN:
err += sn9c102_i2c_write(cam, 0x10, ctrl->value);
break;
case SN9C102_V4L2_CID_GREEN_BALANCE:
err += sn9c102_i2c_write(cam, 0x08, ctrl->value);
break;
case SN9C102_V4L2_CID_DAC_MAGNITUDE:
err += sn9c102_i2c_write(cam, 0x0c, ctrl->value);
break;
default:
return -EINVAL;
}
err += sn9c102_i2c_write(cam, 0x11, 0x01);
return err ? -EIO : 0;
}
static int pas202bca_set_crop(struct sn9c102_device* cam,
const struct v4l2_rect* rect)
{
struct sn9c102_sensor* s = &pas202bca;
int err = 0;
u8 h_start = (u8)(rect->left - s->cropcap.bounds.left) + 3,
v_start = (u8)(rect->top - s->cropcap.bounds.top) + 3;
err += sn9c102_write_reg(cam, h_start, 0x12);
err += sn9c102_write_reg(cam, v_start, 0x13);
return err;
}
static struct sn9c102_sensor pas202bca = {
.name = "PAS202BCA",
.maintainer = "Luca Risolia <luca.risolia@studio.unibo.it>",
.sysfs_ops = SN9C102_I2C_READ | SN9C102_I2C_WRITE,
.frequency = SN9C102_I2C_400KHZ | SN9C102_I2C_100KHZ,
.interface = SN9C102_I2C_2WIRES,
.i2c_slave_id = 0x40,
.init = &pas202bca_init,
.qctrl = {
{
.id = V4L2_CID_EXPOSURE,
.type = V4L2_CTRL_TYPE_INTEGER,
.name = "exposure",
.minimum = 0x01e5,
.maximum = 0x3fff,
.step = 0x0001,
.default_value = 0x01e5,
.flags = 0,
},
{
.id = V4L2_CID_GAIN,
.type = V4L2_CTRL_TYPE_INTEGER,
.name = "global gain",
.minimum = 0x00,
.maximum = 0x1f,
.step = 0x01,
.default_value = 0x0c,
.flags = 0,
},
{
.id = V4L2_CID_RED_BALANCE,
.type = V4L2_CTRL_TYPE_INTEGER,
.name = "red balance",
.minimum = 0x00,
.maximum = 0x0f,
.step = 0x01,
.default_value = 0x01,
.flags = 0,
},
{
.id = V4L2_CID_BLUE_BALANCE,
.type = V4L2_CTRL_TYPE_INTEGER,
.name = "blue balance",
.minimum = 0x00,
.maximum = 0x0f,
.step = 0x01,
.default_value = 0x05,
.flags = 0,
},
{
.id = SN9C102_V4L2_CID_GREEN_BALANCE,
.type = V4L2_CTRL_TYPE_INTEGER,
.name = "green balance",
.minimum = 0x00,
.maximum = 0x0f,
.step = 0x01,
.default_value = 0x00,
.flags = 0,
},
{
.id = SN9C102_V4L2_CID_DAC_MAGNITUDE,
.type = V4L2_CTRL_TYPE_INTEGER,
.name = "DAC magnitude",
.minimum = 0x00,
.maximum = 0xff,
.step = 0x01,
.default_value = 0x04,
.flags = 0,
},
},
.set_ctrl = &pas202bca_set_ctrl,
.cropcap = {
.bounds = {
.left = 0,
.top = 0,
.width = 640,
.height = 480,
},
.defrect = {
.left = 0,
.top = 0,
.width = 640,
.height = 480,
},
},
.set_crop = &pas202bca_set_crop,
.pix_format = {
.width = 640,
.height = 480,
.pixelformat = V4L2_PIX_FMT_SBGGR8,
.priv = 8,
},
.set_pix_format = &pas202bca_set_pix_format
};
int sn9c102_probe_pas202bca(struct sn9c102_device* cam)
{
const struct usb_device_id pas202bca_id_table[] = {
{ USB_DEVICE(0x0c45, 0x60af), },
{ }
};
int err = 0;
if (!sn9c102_match_id(cam,pas202bca_id_table))
return -ENODEV;
err += sn9c102_write_reg(cam, 0x01, 0x01);
err += sn9c102_write_reg(cam, 0x40, 0x01);
err += sn9c102_write_reg(cam, 0x28, 0x17);
if (err)
return -EIO;
if (sn9c102_i2c_try_write(cam, &pas202bca, 0x10, 0)) /* try to write */
return -ENODEV;
sn9c102_attach_sensor(cam, &pas202bca);
return 0;
}

View File

@ -263,7 +263,7 @@ static struct sn9c102_sensor pas202bcb = {
int sn9c102_probe_pas202bcb(struct sn9c102_device* cam)
{
{
int r0 = 0, r1 = 0, err = 0;
unsigned int pid = 0;

View File

@ -66,6 +66,7 @@ extern int sn9c102_probe_hv7131d(struct sn9c102_device* cam);
extern int sn9c102_probe_mi0343(struct sn9c102_device* cam);
extern int sn9c102_probe_ov7630(struct sn9c102_device* cam);
extern int sn9c102_probe_pas106b(struct sn9c102_device* cam);
extern int sn9c102_probe_pas202bca(struct sn9c102_device* cam);
extern int sn9c102_probe_pas202bcb(struct sn9c102_device* cam);
extern int sn9c102_probe_tas5110c1b(struct sn9c102_device* cam);
extern int sn9c102_probe_tas5130d1b(struct sn9c102_device* cam);
@ -81,12 +82,17 @@ static int (*sn9c102_sensor_table[])(struct sn9c102_device*) = { \
&sn9c102_probe_pas106b, /* strong detection based on SENSOR ids */ \
&sn9c102_probe_pas202bcb, /* strong detection based on SENSOR ids */ \
&sn9c102_probe_hv7131d, /* strong detection based on SENSOR ids */ \
&sn9c102_probe_pas202bca, /* detection mostly based on USB pid/vid */ \
&sn9c102_probe_ov7630, /* detection mostly based on USB pid/vid */ \
&sn9c102_probe_tas5110c1b, /* detection based on USB pid/vid */ \
&sn9c102_probe_tas5130d1b, /* detection based on USB pid/vid */ \
NULL, \
};
/* Device identification */
extern struct sn9c102_device*
sn9c102_match_id(struct sn9c102_device* cam, const struct usb_device_id *id);
/* Attach a probed sensor to the camera. */
extern void
sn9c102_attach_sensor(struct sn9c102_device* cam,
@ -108,6 +114,7 @@ sn9c102_attach_sensor(struct sn9c102_device* cam,
static const struct usb_device_id sn9c102_id_table[] = { \
{ USB_DEVICE(0x0c45, 0x6001), }, /* TAS5110C1B */ \
{ USB_DEVICE(0x0c45, 0x6005), }, /* TAS5110C1B */ \
{ USB_DEVICE(0x0c45, 0x6007), }, \
{ USB_DEVICE(0x0c45, 0x6009), }, /* PAS106B */ \
{ USB_DEVICE(0x0c45, 0x600d), }, /* PAS106B */ \
{ USB_DEVICE(0x0c45, 0x6024), }, \
@ -126,7 +133,7 @@ static const struct usb_device_id sn9c102_id_table[] = { \
{ SN9C102_USB_DEVICE(0x0c45, 0x6088, 0xff), }, \
{ SN9C102_USB_DEVICE(0x0c45, 0x608a, 0xff), }, \
{ SN9C102_USB_DEVICE(0x0c45, 0x608b, 0xff), }, \
{ SN9C102_USB_DEVICE(0x0c45, 0x608c, 0xff), }, /* HV7131x */ \
{ SN9C102_USB_DEVICE(0x0c45, 0x608c, 0xff), }, /* HV7131/R */ \
{ SN9C102_USB_DEVICE(0x0c45, 0x608e, 0xff), }, /* CIS-VF10 */ \
{ SN9C102_USB_DEVICE(0x0c45, 0x608f, 0xff), }, /* OV7630 */ \
{ SN9C102_USB_DEVICE(0x0c45, 0x60a0, 0xff), }, \
@ -359,12 +366,6 @@ struct sn9c102_sensor {
error code without rolling back.
*/
const struct usb_device* usbdev;
/*
Points to the usb_device struct after the sensor is attached.
Do not touch unless you know what you are doing.
*/
/*
Do NOT write to the data below, it's READ ONLY. It is used by the
core module to store successfully updated values of the above

View File

@ -142,14 +142,18 @@ static struct sn9c102_sensor tas5110c1b = {
int sn9c102_probe_tas5110c1b(struct sn9c102_device* cam)
{
/* This sensor has no identifiers, so let's attach it anyway */
sn9c102_attach_sensor(cam, &tas5110c1b);
const struct usb_device_id tas5110c1b_id_table[] = {
{ USB_DEVICE(0x0c45, 0x6001), },
{ USB_DEVICE(0x0c45, 0x6005), },
{ USB_DEVICE(0x0c45, 0x60ab), },
{ }
};
/* Sensor detection is based on USB pid/vid */
if (le16_to_cpu(tas5110c1b.usbdev->descriptor.idProduct) != 0x6001 &&
le16_to_cpu(tas5110c1b.usbdev->descriptor.idProduct) != 0x6005 &&
le16_to_cpu(tas5110c1b.usbdev->descriptor.idProduct) != 0x60ab)
if (!sn9c102_match_id(cam, tas5110c1b_id_table))
return -ENODEV;
sn9c102_attach_sensor(cam, &tas5110c1b);
return 0;
}

View File

@ -153,13 +153,17 @@ static struct sn9c102_sensor tas5130d1b = {
int sn9c102_probe_tas5130d1b(struct sn9c102_device* cam)
{
/* This sensor has no identifiers, so let's attach it anyway */
sn9c102_attach_sensor(cam, &tas5130d1b);
const struct usb_device_id tas5130d1b_id_table[] = {
{ USB_DEVICE(0x0c45, 0x6025), },
{ USB_DEVICE(0x0c45, 0x60aa), },
{ }
};
/* Sensor detection is based on USB pid/vid */
if (le16_to_cpu(tas5130d1b.usbdev->descriptor.idProduct) != 0x6025 &&
le16_to_cpu(tas5130d1b.usbdev->descriptor.idProduct) != 0x60aa)
if (!sn9c102_match_id(cam, tas5130d1b_id_table))
return -ENODEV;
sn9c102_attach_sensor(cam, &tas5130d1b);
return 0;
}

View File

@ -67,6 +67,7 @@
#include <linux/errno.h>
#include <linux/videodev.h>
#include <linux/usb.h>
#include <linux/mutex.h>
#include "stv680.h"
@ -317,12 +318,11 @@ static int stv_init (struct usb_stv *stv680)
unsigned char *buffer;
unsigned long int bufsize;
buffer = kmalloc (40, GFP_KERNEL);
buffer = kzalloc (40, GFP_KERNEL);
if (buffer == NULL) {
PDEBUG (0, "STV(e): Out of (small buf) memory");
return -1;
}
memset (buffer, 0, 40);
udelay (100);
/* set config 1, interface 0, alternate 0 */
@ -1258,22 +1258,22 @@ static int stv680_mmap (struct file *file, struct vm_area_struct *vma)
unsigned long size = vma->vm_end-vma->vm_start;
unsigned long page, pos;
down (&stv680->lock);
mutex_lock(&stv680->lock);
if (stv680->udev == NULL) {
up (&stv680->lock);
mutex_unlock(&stv680->lock);
return -EIO;
}
if (size > (((STV680_NUMFRAMES * stv680->maxframesize) + PAGE_SIZE - 1)
& ~(PAGE_SIZE - 1))) {
up (&stv680->lock);
mutex_unlock(&stv680->lock);
return -EINVAL;
}
pos = (unsigned long) stv680->fbuf;
while (size > 0) {
page = vmalloc_to_pfn((void *)pos);
if (remap_pfn_range(vma, start, page, PAGE_SIZE, PAGE_SHARED)) {
up (&stv680->lock);
mutex_unlock(&stv680->lock);
return -EAGAIN;
}
start += PAGE_SIZE;
@ -1283,7 +1283,7 @@ static int stv680_mmap (struct file *file, struct vm_area_struct *vma)
else
size = 0;
}
up (&stv680->lock);
mutex_unlock(&stv680->lock);
return 0;
}
@ -1387,14 +1387,12 @@ static int stv680_probe (struct usb_interface *intf, const struct usb_device_id
goto error;
}
/* We found one */
if ((stv680 = kmalloc (sizeof (*stv680), GFP_KERNEL)) == NULL) {
if ((stv680 = kzalloc (sizeof (*stv680), GFP_KERNEL)) == NULL) {
PDEBUG (0, "STV(e): couldn't kmalloc stv680 struct.");
retval = -ENOMEM;
goto error;
}
memset (stv680, 0, sizeof (*stv680));
stv680->udev = dev;
stv680->camera_name = camera_name;
@ -1409,7 +1407,7 @@ static int stv680_probe (struct usb_interface *intf, const struct usb_device_id
memcpy (stv680->vdev->name, stv680->camera_name, strlen (stv680->camera_name));
init_waitqueue_head (&stv680->wq);
init_MUTEX (&stv680->lock);
mutex_init (&stv680->lock);
wmb ();
if (video_register_device (stv680->vdev, VFL_TYPE_GRABBER, video_nr) == -1) {

View File

@ -118,7 +118,7 @@ struct usb_stv {
int origGain;
int origMode; /* original camera mode */
struct semaphore lock; /* to lock the structure */
struct mutex lock; /* to lock the structure */
int user; /* user count for exclusive use */
int removed; /* device disconnected */
int streaming; /* Are we streaming video? */

View File

@ -690,14 +690,13 @@ int usbvideo_register(
}
base_size = num_cams * sizeof(struct uvd) + sizeof(struct usbvideo);
cams = (struct usbvideo *) kmalloc(base_size, GFP_KERNEL);
cams = (struct usbvideo *) kzalloc(base_size, GFP_KERNEL);
if (cams == NULL) {
err("Failed to allocate %d. bytes for usbvideo struct", base_size);
return -ENOMEM;
}
dbg("%s: Allocated $%p (%d. bytes) for %d. cameras",
__FUNCTION__, cams, base_size, num_cams);
memset(cams, 0, base_size);
/* Copy callbacks, apply defaults for those that are not set */
memmove(&cams->cb, cbTbl, sizeof(cams->cb));
@ -715,7 +714,7 @@ int usbvideo_register(
cams->md_module = md;
if (cams->md_module == NULL)
warn("%s: module == NULL!", __FUNCTION__);
init_MUTEX(&cams->lock); /* to 1 == available */
mutex_init(&cams->lock); /* to 1 == available */
for (i = 0; i < num_cams; i++) {
struct uvd *up = &cams->cam[i];
@ -863,7 +862,7 @@ static void usbvideo_Disconnect(struct usb_interface *intf)
if (uvd->debug > 0)
info("%s(%p.)", __FUNCTION__, intf);
down(&uvd->lock);
mutex_lock(&uvd->lock);
uvd->remove_pending = 1; /* Now all ISO data will be ignored */
/* At this time we ask to cancel outstanding URBs */
@ -883,7 +882,7 @@ static void usbvideo_Disconnect(struct usb_interface *intf)
info("%s: In use, disconnect pending.", __FUNCTION__);
else
usbvideo_CameraRelease(uvd);
up(&uvd->lock);
mutex_unlock(&uvd->lock);
info("USB camera disconnected.");
usbvideo_ClientDecModCount(uvd);
@ -930,19 +929,19 @@ static int usbvideo_find_struct(struct usbvideo *cams)
err("No usbvideo handle?");
return -1;
}
down(&cams->lock);
mutex_lock(&cams->lock);
for (u = 0; u < cams->num_cameras; u++) {
struct uvd *uvd = &cams->cam[u];
if (!uvd->uvd_used) /* This one is free */
{
uvd->uvd_used = 1; /* In use now */
init_MUTEX(&uvd->lock); /* to 1 == available */
mutex_init(&uvd->lock); /* to 1 == available */
uvd->dev = NULL;
rv = u;
break;
}
}
up(&cams->lock);
mutex_unlock(&cams->lock);
return rv;
}
@ -984,7 +983,7 @@ struct uvd *usbvideo_AllocateDevice(struct usbvideo *cams)
/* Not relying upon caller we increase module counter ourselves */
usbvideo_ClientIncModCount(uvd);
down(&uvd->lock);
mutex_lock(&uvd->lock);
for (i=0; i < USBVIDEO_NUMSBUF; i++) {
uvd->sbuf[i].urb = usb_alloc_urb(FRAMES_PER_DESC, GFP_KERNEL);
if (uvd->sbuf[i].urb == NULL) {
@ -1007,7 +1006,7 @@ struct uvd *usbvideo_AllocateDevice(struct usbvideo *cams)
* return control to the client's probe function right now.
*/
allocate_done:
up (&uvd->lock);
mutex_unlock(&uvd->lock);
usbvideo_ClientDecModCount(uvd);
return uvd;
}
@ -1121,7 +1120,7 @@ static int usbvideo_v4l_open(struct inode *inode, struct file *file)
info("%s($%p)", __FUNCTION__, dev);
usbvideo_ClientIncModCount(uvd);
down(&uvd->lock);
mutex_lock(&uvd->lock);
if (uvd->user) {
err("%s: Someone tried to open an already opened device!", __FUNCTION__);
@ -1202,7 +1201,7 @@ static int usbvideo_v4l_open(struct inode *inode, struct file *file)
}
}
}
up(&uvd->lock);
mutex_unlock(&uvd->lock);
if (errCode != 0)
usbvideo_ClientDecModCount(uvd);
if (uvd->debug > 0)
@ -1231,7 +1230,7 @@ static int usbvideo_v4l_close(struct inode *inode, struct file *file)
if (uvd->debug > 1)
info("%s($%p)", __FUNCTION__, dev);
down(&uvd->lock);
mutex_lock(&uvd->lock);
GET_CALLBACK(uvd, stopDataPump)(uvd);
usbvideo_rvfree(uvd->fbuf, uvd->fbuf_size);
uvd->fbuf = NULL;
@ -1252,7 +1251,7 @@ static int usbvideo_v4l_close(struct inode *inode, struct file *file)
info("usbvideo_v4l_close: Final disconnect.");
usbvideo_CameraRelease(uvd);
}
up(&uvd->lock);
mutex_unlock(&uvd->lock);
usbvideo_ClientDecModCount(uvd);
if (uvd->debug > 1)
@ -1512,7 +1511,7 @@ static ssize_t usbvideo_v4l_read(struct file *file, char __user *buf,
if (uvd->debug >= 1)
info("%s: %Zd. bytes, noblock=%d.", __FUNCTION__, count, noblock);
down(&uvd->lock);
mutex_lock(&uvd->lock);
/* See if a frame is completed, then use it. */
for(i = 0; i < USBVIDEO_NUMFRAMES; i++) {
@ -1644,7 +1643,7 @@ static ssize_t usbvideo_v4l_read(struct file *file, char __user *buf,
}
}
read_done:
up(&uvd->lock);
mutex_unlock(&uvd->lock);
return count;
}

Some files were not shown because too many files have changed in this diff Show More