korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-11-20 18:54:09 +08:00
Code Issues Packages Projects Releases Wiki Activity

ARM: dts: BCM5301X: Add support for Linksys EA9500

Browse Source 
Hardware Info
-------------

Processor	- Broadcom BCM4709C0KFEBG dual-core @ 1.4 GHz
Switch		- BCM53012 in BCM4709C0KFEBG & external BCM53125
DDR3 RAM	- 256 MB
Flash		- 128 MB (Toshiba TC58BVG0S3HTA00)
2.4GHz		- BCM4366 4×4 2.4/5G single chip 802.11ac SoC
Power Amp	- Skyworks SE2623L 2.4 GHz power amp (x4)
5GHz x 2	- BCM4366 4×4 2.4/5G single chip 802.11ac SoC
Power Amp	- PLX Technology PEX8603 3-lane, 3-port PCIe switch
Ports		- 8 Ports, 1 WAN Ports
Antennas	- 8 Antennas
Serial Port	- @J6 [GND,TX,RX] (VCC NC)    115200 8n1

Tested with OpenWrt built with DSA driver and Kernel v4.14

Signed-off-by: Vivek Unune <npcomplete13@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
This commit is contained in:
Vivek Unune 2018-06-18 13:41:59 -04:00 committed by Florian Fainelli
parent a21e754843
commit 2bebdfcdcd
1 changed files with 229 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

229
arch/arm/boot/dts/bcm47094-linksys-panamera.dts
View File

@ -31,6 +31,235 @@
linux,code = <KEY_WPS_BUTTON>;
gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
};
rfkill {
label = "WiFi";
linux,code = <KEY_RFKILL>;
gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
};
reset {
label = "Reset";
linux,code = <KEY_RESTART>;
gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
};
};
leds {
compatible = "gpio-leds";
wps {
label = "bcm53xx:white:wps";
gpios = <&chipcommon 22 GPIO_ACTIVE_LOW>;
};
usb2 {
label = "bcm53xx:green:usb2";
gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
trigger-sources = <&ohci_port2>, <&ehci_port2>;
linux,default-trigger = "usbport";
};
usb3 {
label = "bcm53xx:green:usb3";
gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
trigger-sources = <&ohci_port1>, <&ehci_port1>,
<&xhci_port1>;
linux,default-trigger = "usbport";
};
power {
label = "bcm53xx:white:power";
gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
};
wifi-disabled {
label = "bcm53xx:amber:wifi-disabled";
gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
};
wifi-enabled {
label = "bcm53xx:white:wifi-enabled";
gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
};
bluebar1 {
label = "bcm53xx:white:bluebar1";
gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
};
bluebar2 {
label = "bcm53xx:white:bluebar2";
gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
};
bluebar3 {
label = "bcm53xx:white:bluebar3";
gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
};
bluebar4 {
label = "bcm53xx:white:bluebar4";
gpios = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
};
bluebar5 {
label = "bcm53xx:white:bluebar5";
gpios = <&chipcommon 19 GPIO_ACTIVE_HIGH>;
};
bluebar6 {
label = "bcm53xx:white:bluebar6";
gpios = <&chipcommon 20 GPIO_ACTIVE_HIGH>;
};
bluebar7 {
label = "bcm53xx:white:bluebar7";
gpios = <&chipcommon 21 GPIO_ACTIVE_HIGH>;
};
bluebar8 {
label = "bcm53xx:white:bluebar8";
gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
};
};
mdio-bus-mux {
/* BIT(9) = 1 => external mdio */
mdio_ext: mdio@200 {
reg = <0x200>;
#address-cells = <1>;
#size-cells = <0>;
};
};
mdio-mii-mux {
compatible = "mdio-mux-mmioreg";
mdio-parent-bus = <&mdio_ext>;
#address-cells = <1>;
#size-cells = <0>;
reg = <0x1800c1c0 0x4>;
/* BIT(6) = mdc, BIT(7) = mdio */
mux-mask = <0xc0>;
mdio-mii@0 {
/* Enable MII function */
reg = <0x0>;
#address-cells = <1>;
#size-cells = <0>;
switch@0 {
compatible = "brcm,bcm53125";
#address-cells = <1>;
#size-cells = <0>;
reset-gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
reset-names = "robo_reset";
reg = <0>;
dsa,member = <1 0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
label = "lan1";
};
port@1 {
reg = <1>;
label = "lan5";
};
port@2 {
reg = <2>;
label = "lan2";
};
port@3 {
reg = <3>;
label = "lan6";
};
port@4 {
reg = <4>;
label = "lan3";
};
sw1_p8: port@8 {
reg = <8>;
ethernet = <&sw0_p0>;
label = "cpu";
fixed-link {
speed = <1000>;
full-duplex;
};
};
};
};
};
};
};
&usb2 {
vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
};
&usb3 {
vcc-gpio = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
};
&srab {
compatible = "brcm,bcm53012-srab", "brcm,bcm5301x-srab";
status = "okay";
dsa,member = <0 0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@1 {
reg = <1>;
label = "lan7";
};
port@2 {
reg = <2>;
label = "lan4";
};
port@3 {
reg = <3>;
label = "lan8";
};
port@4 {
reg = <4>;
label = "wan";
};
port@8 {
reg = <8>;
ethernet = <&gmac2>;
label = "cpu";
fixed-link {
speed = <1000>;
full-duplex;
};
};
sw0_p0: port@0 {
reg = <0>;
label = "extsw";
fixed-link {
speed = <1000>;
full-duplex;
};
};
};
};