mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-11 12:28:41 +08:00
W1: OMAP HDQ1W: use 32-bit register accesses
HDQ/1-wire registers are 32 bits long, even if the register contents fit into 8 bits, so accesses must be 32-bit aligned. Evidently the OMAP2/3 interconnects allowed the driver to get away with 8 bit accesses, but the OMAP4 puts a stop to that: [ 1.488800] Driver for 1-wire Dallas network protocol. [ 1.495025] Bad mode in data abort handler detected [ 1.500122] Internal error: Oops - bad mode: 0 [#1] SMP [ 1.505615] Modules linked in: [ 1.508819] CPU: 0 Not tainted (3.3.0-rc1-00008-g45030e9 #992) [ 1.515289] PC is at 0xffff0018 [ 1.518615] LR is at omap_hdq_probe+0xd4/0x2cc The OMAP4430 ES2 Rev X TRM does warn about this restriction in section 23.2.6.2 "HDQ/1-Wire Registers". Fixes the crash on OMAP4430 ES2 Pandaboard. Tested also on OMAP34xx and OMAP2420; it seems to work fine on those chips, although due to the lack of boards with HDQ/1-wire devices here, a more indepth test was not possible. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: NeilBrown <neilb@suse.de> Cc: Evgeniy Polyakov <zbr@ioremap.net> Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
This commit is contained in:
parent
d660030061
commit
2acd089471
@ -102,20 +102,20 @@ static struct w1_bus_master omap_w1_master = {
|
||||
/* HDQ register I/O routines */
|
||||
static inline u8 hdq_reg_in(struct hdq_data *hdq_data, u32 offset)
|
||||
{
|
||||
return __raw_readb(hdq_data->hdq_base + offset);
|
||||
return __raw_readl(hdq_data->hdq_base + offset);
|
||||
}
|
||||
|
||||
static inline void hdq_reg_out(struct hdq_data *hdq_data, u32 offset, u8 val)
|
||||
{
|
||||
__raw_writeb(val, hdq_data->hdq_base + offset);
|
||||
__raw_writel(val, hdq_data->hdq_base + offset);
|
||||
}
|
||||
|
||||
static inline u8 hdq_reg_merge(struct hdq_data *hdq_data, u32 offset,
|
||||
u8 val, u8 mask)
|
||||
{
|
||||
u8 new_val = (__raw_readb(hdq_data->hdq_base + offset) & ~mask)
|
||||
u8 new_val = (__raw_readl(hdq_data->hdq_base + offset) & ~mask)
|
||||
| (val & mask);
|
||||
__raw_writeb(new_val, hdq_data->hdq_base + offset);
|
||||
__raw_writel(new_val, hdq_data->hdq_base + offset);
|
||||
|
||||
return new_val;
|
||||
}
|
||||
|
Loading…
Reference in New Issue
Block a user