ALSA: vxpocket: Use standard print API

Use the standard print API with dev_*() instead of the old house-baked
one.  It gives better information and allows dynamically control of
debug prints.

Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-48-tiwai@suse.de
This commit is contained in:
Takashi Iwai 2024-08-07 15:34:37 +02:00
parent c7e58049a2
commit 2acbb5e572
2 changed files with 14 additions and 21 deletions

View File

@ -84,7 +84,7 @@ static int vx_check_magic(struct vx_core *chip)
return 0;
msleep(10);
} while (time_after_eq(end_time, jiffies));
snd_printk(KERN_ERR "cannot find xilinx magic word (%x)\n", c);
dev_err(chip->card->dev, "cannot find xilinx magic word (%x)\n", c);
return -EIO;
}
@ -153,7 +153,6 @@ static int vxp_load_xilinx_binary(struct vx_core *_chip, const struct firmware *
vx_outb(chip, ICR, 0);
/* Wait for answer HF2 equal to 1 */
snd_printdd(KERN_DEBUG "check ISR_HF2\n");
if (vx_check_isr(_chip, ISR_HF2, ISR_HF2, 20) < 0)
goto _error;
@ -170,7 +169,9 @@ static int vxp_load_xilinx_binary(struct vx_core *_chip, const struct firmware *
goto _error;
c = vx_inb(chip, RXL);
if (c != (int)data)
snd_printk(KERN_ERR "vxpocket: load xilinx mismatch at %d: 0x%x != 0x%x\n", i, c, (int)data);
dev_err(_chip->card->dev,
"vxpocket: load xilinx mismatch at %d: 0x%x != 0x%x\n",
i, c, (int)data);
}
/* reset HF1 */
@ -188,7 +189,8 @@ static int vxp_load_xilinx_binary(struct vx_core *_chip, const struct firmware *
c |= (int)vx_inb(chip, RXM) << 8;
c |= vx_inb(chip, RXL);
snd_printdd(KERN_DEBUG "xilinx: dsp size received 0x%x, orig 0x%zx\n", c, fw->size);
dev_dbg(_chip->card->dev,
"xilinx: dsp size received 0x%x, orig 0x%zx\n", c, fw->size);
vx_outb(chip, ICR, ICR_HF0);

View File

@ -151,7 +151,8 @@ static int snd_vxpocket_assign_resources(struct vx_core *chip, int port, int irq
struct snd_card *card = chip->card;
struct snd_vxpocket *vxp = to_vxpocket(chip);
snd_printdd(KERN_DEBUG "vxpocket assign resources: port = 0x%x, irq = %d\n", port, irq);
dev_dbg(chip->card->dev,
"vxpocket assign resources: port = 0x%x, irq = %d\n", port, irq);
vxp->port = port;
sprintf(card->shortname, "Digigram %s", card->driver);
@ -178,13 +179,11 @@ static int vxpocket_config(struct pcmcia_device *link)
struct vx_core *chip = link->priv;
int ret;
snd_printdd(KERN_DEBUG "vxpocket_config called\n");
/* redefine hardware record according to the VERSION1 string */
if (!strcmp(link->prod_id[1], "VX-POCKET")) {
snd_printdd("VX-pocket is detected\n");
dev_dbg(chip->card->dev, "VX-pocket is detected\n");
} else {
snd_printdd("VX-pocket 440 is detected\n");
dev_dbg(chip->card->dev, "VX-pocket 440 is detected\n");
/* overwrite the hardware information */
chip->hw = &vxp440_hw;
chip->type = vxp440_hw.type;
@ -226,11 +225,8 @@ static int vxp_suspend(struct pcmcia_device *link)
{
struct vx_core *chip = link->priv;
snd_printdd(KERN_DEBUG "SUSPEND\n");
if (chip) {
snd_printdd(KERN_DEBUG "snd_vx_suspend calling\n");
if (chip)
snd_vx_suspend(chip);
}
return 0;
}
@ -239,15 +235,10 @@ static int vxp_resume(struct pcmcia_device *link)
{
struct vx_core *chip = link->priv;
snd_printdd(KERN_DEBUG "RESUME\n");
if (pcmcia_dev_present(link)) {
//struct snd_vxpocket *vxp = (struct snd_vxpocket *)chip;
if (chip) {
snd_printdd(KERN_DEBUG "calling snd_vx_resume\n");
if (chip)
snd_vx_resume(chip);
}
}
snd_printdd(KERN_DEBUG "resume done!\n");
return 0;
}
@ -269,7 +260,7 @@ static int vxpocket_probe(struct pcmcia_device *p_dev)
break;
}
if (i >= SNDRV_CARDS) {
snd_printk(KERN_ERR "vxpocket: too many cards found\n");
dev_err(&p_dev->dev, "vxpocket: too many cards found\n");
return -EINVAL;
}
if (! enable[i])
@ -279,7 +270,7 @@ static int vxpocket_probe(struct pcmcia_device *p_dev)
err = snd_card_new(&p_dev->dev, index[i], id[i], THIS_MODULE,
0, &card);
if (err < 0) {
snd_printk(KERN_ERR "vxpocket: cannot create a card instance\n");
dev_err(&pdev->dev, "vxpocket: cannot create a card instance\n");
return err;
}