mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-19 09:04:51 +08:00
ARM: dts: Fix dcan driver probe failed on am437x platform
Got following d_can probe errors with kernel 5.8-rc1 on am437x [ 10.730822] CAN device driver interface Starting Wait for Network to be Configured... [ OK ] Reached target Network. [ 10.787363] c_can_platform 481cc000.can: probe failed [ 10.792484] c_can_platform: probe of 481cc000.can failed with error -2 [ 10.799457] c_can_platform 481d0000.can: probe failed [ 10.804617] c_can_platform: probe of 481d0000.can failed with error -2 actually, Tony has fixed this issue on am335x with the patch [3] Since am437x has the same clock structure with am335x [1][2], so reuse the code from Tony Lindgren's patch [3] to fix it. [1]: https://www.ti.com/lit/pdf/spruh73 Chapter-23, Figure 23-1. DCAN Integration [2]: https://www.ti.com/lit/pdf/spruhl7 Chapter-25, Figure 25-1. DCAN Integration [3]: commit516f1117d0
("ARM: dts: Configure osc clock for d_can on am335x") Fixes:1a5cd7c23c
("bus: ti-sysc: Enable all clocks directly during init to read revision") Signed-off-by: dillon min <dillon.minfei@gmail.com> [tony@atomide.com: aligned commit message a bit for readability] Signed-off-by: Tony Lindgren <tony@atomide.com>
This commit is contained in:
parent
a18fb07623
commit
2a4117df9b
@ -1541,8 +1541,9 @@
|
||||
reg = <0xcc020 0x4>;
|
||||
reg-names = "rev";
|
||||
/* Domains (P, C): per_pwrdm, l4ls_clkdm */
|
||||
clocks = <&l4ls_clkctrl AM4_L4LS_D_CAN0_CLKCTRL 0>;
|
||||
clock-names = "fck";
|
||||
clocks = <&l4ls_clkctrl AM4_L4LS_D_CAN0_CLKCTRL 0>,
|
||||
<&dcan0_fck>;
|
||||
clock-names = "fck", "osc";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges = <0x0 0xcc000 0x2000>;
|
||||
@ -1550,6 +1551,8 @@
|
||||
dcan0: can@0 {
|
||||
compatible = "ti,am4372-d_can", "ti,am3352-d_can";
|
||||
reg = <0x0 0x2000>;
|
||||
clocks = <&dcan0_fck>;
|
||||
clock-names = "fck";
|
||||
syscon-raminit = <&scm_conf 0x644 0>;
|
||||
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
|
||||
status = "disabled";
|
||||
@ -1561,8 +1564,9 @@
|
||||
reg = <0xd0020 0x4>;
|
||||
reg-names = "rev";
|
||||
/* Domains (P, C): per_pwrdm, l4ls_clkdm */
|
||||
clocks = <&l4ls_clkctrl AM4_L4LS_D_CAN1_CLKCTRL 0>;
|
||||
clock-names = "fck";
|
||||
clocks = <&l4ls_clkctrl AM4_L4LS_D_CAN1_CLKCTRL 0>,
|
||||
<&dcan1_fck>;
|
||||
clock-names = "fck", "osc";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges = <0x0 0xd0000 0x2000>;
|
||||
@ -1570,6 +1574,8 @@
|
||||
dcan1: can@0 {
|
||||
compatible = "ti,am4372-d_can", "ti,am3352-d_can";
|
||||
reg = <0x0 0x2000>;
|
||||
clocks = <&dcan1_fck>;
|
||||
clock-name = "fck";
|
||||
syscon-raminit = <&scm_conf 0x644 1>;
|
||||
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
|
||||
status = "disabled";
|
||||
|
Loading…
Reference in New Issue
Block a user