korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-11-16 08:44:21 +08:00
Code Issues Packages Projects Releases Wiki Activity

[media] mt9v032: Add reset and standby gpios

Browse Source 
Add optional reset and standby gpios. The reset gpio is used to reset
the chip in power_on().

The standby gpio is not used currently. It is just unset, so the chip is
not in standby.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
This commit is contained in:
Markus Pargmann 2015-12-14 12:41:51 -02:00 committed by Mauro Carvalho Chehab
parent c1ae8f3ad8
commit 28d5bdbe5c
2 changed files with 30 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
Documentation/devicetree/bindings/media/i2c/mt9v032.txt
View File

@ -20,6 +20,8 @@ Optional Properties:
- link-frequencies: List of allowed link frequencies in Hz. Each frequency is
expressed as a 64-bit big-endian integer.
- reset-gpios: GPIO handle which is connected to the reset pin of the chip.
- standby-gpios: GPIO handle which is connected to the standby pin of the chip.
For further reading on port node refer to
Documentation/devicetree/bindings/media/video-interfaces.txt.

28
drivers/media/i2c/mt9v032.c
View File

@ -14,6 +14,7 @@
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/gpio/consumer.h>
#include <linux/i2c.h>
#include <linux/log2.h>
#include <linux/mutex.h>
@ -251,6 +252,8 @@ struct mt9v032 {
struct regmap *regmap;
struct clk *clk;
struct gpio_desc *reset_gpio;
struct gpio_desc *standby_gpio;
struct mt9v032_platform_data *pdata;
const struct mt9v032_model_info *model;
@ -312,16 +315,31 @@ static int mt9v032_power_on(struct mt9v032 *mt9v032)
struct regmap *map = mt9v032->regmap;
int ret;
if (mt9v032->reset_gpio)
gpiod_set_value_cansleep(mt9v032->reset_gpio, 1);
ret = clk_set_rate(mt9v032->clk, mt9v032->sysclk);
if (ret < 0)
return ret;
/* System clock has to be enabled before releasing the reset */
ret = clk_prepare_enable(mt9v032->clk);
if (ret)
return ret;
udelay(1);
if (mt9v032->reset_gpio) {
gpiod_set_value_cansleep(mt9v032->reset_gpio, 0);
/* After releasing reset we need to wait 10 clock cycles
* before accessing the sensor over I2C. As the minimum SYSCLK
* frequency is 13MHz, waiting 1µs will be enough in the worst
* case.
*/
udelay(1);
}
/* Reset the chip and stop data read out */
ret = regmap_write(map, MT9V032_RESET, 1);
if (ret < 0)
@ -954,6 +972,16 @@ static int mt9v032_probe(struct i2c_client *client,
if (IS_ERR(mt9v032->clk))
return PTR_ERR(mt9v032->clk);
mt9v032->reset_gpio = devm_gpiod_get_optional(&client->dev, "reset",
GPIOD_OUT_HIGH);
if (IS_ERR(mt9v032->reset_gpio))
return PTR_ERR(mt9v032->reset_gpio);
mt9v032->standby_gpio = devm_gpiod_get_optional(&client->dev, "standby",
GPIOD_OUT_LOW);
if (IS_ERR(mt9v032->standby_gpio))
return PTR_ERR(mt9v032->standby_gpio);
mutex_init(&mt9v032->power_lock);
mt9v032->pdata = pdata;
mt9v032->model = (const void *)did->driver_data;