korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-12-28 05:24:47 +08:00
Code Issues Packages Projects Releases Wiki Activity

arm64: dts: apq8016-sbc: Add HDMI display support

Browse Source 
The APQ8016-sbc provides a HDMI output. The APQ8016 display block only
provides a MIPI DSI output. So, the board has a ADV7533 DSI to HDMI
encoder chip that sits between the DSI PHY output and the HDMI
connector.

Add the ADV7533 DT node under its I2C control bus, and tie the DSI
output port to the ADV7533's input port.

Cc: Andy Gross <andy.gross@linaro.org>
Cc: Rob Herring <robh@kernel.org>
Cc: devicetree@vger.kernel.org

Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This commit is contained in:
Archit Taneja 2016-06-23 19:43:30 +05:30 committed by Andy Gross
parent 305410ffd1
commit 28546b0955
2 changed files with 130 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

48
arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi
View File

@ -24,4 +24,52 @@
bias-pull-up;
};
};
adv7533_int_active: adv533_int_active {
pinmux {
function = "gpio";
pins = "gpio31";
};
pinconf {
pins = "gpio31";
drive-strength = <16>;
bias-disable;
};
};
adv7533_int_suspend: adv7533_int_suspend {
pinmux {
function = "gpio";
pins = "gpio31";
};
pinconf {
pins = "gpio31";
drive-strength = <2>;
bias-disable;
};
};
adv7533_switch_active: adv7533_switch_active {
pinmux {
function = "gpio";
pins = "gpio32";
};
pinconf {
pins = "gpio32";
drive-strength = <16>;
bias-disable;
};
};
adv7533_switch_suspend: adv7533_switch_suspend {
pinmux {
function = "gpio";
pins = "gpio32";
};
pinconf {
pins = "gpio32";
drive-strength = <2>;
bias-disable;
};
};
};

82
arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
View File

@ -63,6 +63,47 @@
/* On High speed expansion */
label = "HS-I2C2";
status = "okay";
adv_bridge: bridge@39 {
status = "okay";
compatible = "adi,adv7533";
reg = <0x39>;
interrupt-parent = <&msmgpio>;
interrupts = <31 2>;
adi,dsi-lanes = <4>;
pd-gpios = <&msmgpio 32 0>;
avdd-supply = <&pm8916_l6>;
v1p2-supply = <&pm8916_l6>;
v3p3-supply = <&pm8916_l17>;
pinctrl-names = "default","sleep";
pinctrl-0 = <&adv7533_int_active &adv7533_switch_active>;
pinctrl-1 = <&adv7533_int_suspend &adv7533_switch_suspend>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
adv7533_in: endpoint {
remote-endpoint = <&dsi0_out>;
};
};
port@1 {
reg = <1>;
adv7533_out: endpoint {
remote-endpoint = <&hdmi_con>;
};
};
};
};
};
i2c@78ba000 {
@ -180,6 +221,36 @@
lpass@07708000 {
status = "okay";
};
mdss@1a00000 {
status = "okay";
mdp@1a01000 {
status = "okay";
};
dsi@1a98000 {
status = "okay";
vdda-supply = <&pm8916_l2>;
vddio-supply = <&pm8916_l6>;
ports {
port@1 {
endpoint {
remote-endpoint = <&adv7533_in>;
data-lanes = <0 1 2 3>;
};
};
};
};
dsi-phy@1a98300 {
status = "okay";
vddio-supply = <&pm8916_l6>;
};
};
};
usb2513 {
@ -194,6 +265,17 @@
pinctrl-names = "default";
pinctrl-0 = <&usb_id_default>;
};
hdmi-out {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_con: endpoint {
remote-endpoint = <&adv7533_out>;
};
};
};
};
&smd_rpm_regulators {