From 281e3aea35e521a90b0b05face3196da23758092 Mon Sep 17 00:00:00 2001 From: Serge Semin Date: Thu, 21 May 2020 17:07:15 +0300 Subject: [PATCH] mips: Add MIPS Warrior P5600 support This is a MIPS32 Release 5 based IP core with XPA, EVA, dual/quad issue exec pipes, MMU with two-levels TLB, UCA, MSA, MDU core level features and system level features like up to six P5600 calculation cores, CM2 with L2 cache, IOCU/IOMMU (though might be unused depending on the system-specific IP core configuration), GIC, CPC, virtualisation module, eJTAG and PDtrace. As being MIPS32 Release 5 based core it provides all the features available by the CPU_MIPS32_R5 config, while adding a few more like UCA attribute support, availability of CPU-freq (by means of L2/CM clock ratio setting), EI/VI GIC modes detection at runtime. In addition to this if P5600 architecture is enabled modern GNU GCC provides a specific tuning for P5600 processors with respect to the classic MIPS32 Release 5. First of all branch-likely avoidance is activated only when the code is compiled with the speed optimization (avoidance is always enabled for the pure MIPS32 Release 5 architecture). Secondly the madd/msub avoidance is enabled since madd/msub utilization isn't profitable due to overhead of getting the result out of the HI/LO registers. Multiply-accumulate instructions are activated and utilized together with the necessary code reorder when multiply-add/multiply-subtract statements are met. Finally load/store bonding is activated by default. All of these optimizations may make the code relatively faster than if just MIP32 release 5 architecture was requested. Co-developed-by: Alexey Malahov Signed-off-by: Alexey Malahov Signed-off-by: Serge Semin Cc: Thomas Bogendoerfer Cc: Paul Burton Cc: Ralf Baechle Cc: Arnd Bergmann Cc: Rob Herring Cc: devicetree@vger.kernel.org Signed-off-by: Thomas Bogendoerfer --- arch/mips/Kconfig | 37 +++++++++++++++++++++++++++++----- arch/mips/Makefile | 1 + arch/mips/include/asm/module.h | 2 ++ 3 files changed, 35 insertions(+), 5 deletions(-) diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 9dc173ff7293..2747b1b2d435 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -1618,6 +1618,28 @@ config CPU_MIPS64_R6 family, are based on a MIPS64r6 processor. If you own an older processor, you probably need to select MIPS64r1 or MIPS64r2 instead. +config CPU_P5600 + bool "MIPS Warrior P5600" + depends on SYS_HAS_CPU_P5600 + select CPU_HAS_PREFETCH + select CPU_SUPPORTS_32BIT_KERNEL + select CPU_SUPPORTS_HIGHMEM + select CPU_SUPPORTS_MSA + select CPU_SUPPORTS_UNCACHED_ACCELERATED + select CPU_SUPPORTS_CPUFREQ + select CPU_MIPSR2_IRQ_VI + select CPU_MIPSR2_IRQ_EI + select HAVE_KVM + select MIPS_O32_FP64_SUPPORT + help + Choose this option to build a kernel for MIPS Warrior P5600 CPU. + It's based on MIPS32r5 ISA with XPA, EVA, dual/quad issue exec pipes, + MMU with two-levels TLB, UCA, MSA, MDU core level features and system + level features like up to six P5600 calculation cores, CM2 with L2 + cache, IOCU/IOMMU (though might be unused depending on the system- + specific IP core configuration), GIC, CPC, virtualisation module, + eJTAG and PDtrace. + config CPU_R3000 bool "R3000" depends on SYS_HAS_CPU_R3000 @@ -1794,7 +1816,8 @@ endchoice config CPU_MIPS32_3_5_FEATURES bool "MIPS32 Release 3.5 Features" depends on SYS_HAS_CPU_MIPS32_R3_5 - depends on CPU_MIPS32_R2 || CPU_MIPS32_R5 || CPU_MIPS32_R6 + depends on CPU_MIPS32_R2 || CPU_MIPS32_R5 || CPU_MIPS32_R6 || \ + CPU_P5600 help Choose this option to build a kernel for release 2 or later of the MIPS32 architecture including features from the 3.5 release such as @@ -1814,7 +1837,7 @@ config CPU_MIPS32_3_5_EVA config CPU_MIPS32_R5_FEATURES bool "MIPS32 Release 5 Features" depends on SYS_HAS_CPU_MIPS32_R5 - depends on CPU_MIPS32_R2 || CPU_MIPS32_R5 + depends on CPU_MIPS32_R2 || CPU_MIPS32_R5 || CPU_P5600 help Choose this option to build a kernel for release 2 or later of the MIPS32 architecture including features from release 5 such as @@ -1969,6 +1992,10 @@ config SYS_HAS_CPU_MIPS64_R6 bool select ARCH_HAS_SYNC_DMA_FOR_CPU if DMA_NONCOHERENT +config SYS_HAS_CPU_P5600 + bool + select ARCH_HAS_SYNC_DMA_FOR_CPU if DMA_NONCOHERENT + config SYS_HAS_CPU_R3000 bool @@ -2053,7 +2080,7 @@ endmenu config CPU_MIPS32 bool default y if CPU_MIPS32_R1 || CPU_MIPS32_R2 || CPU_MIPS32_R5 || \ - CPU_MIPS32_R6 + CPU_MIPS32_R6 || CPU_P5600 config CPU_MIPS64 bool @@ -2076,7 +2103,7 @@ config CPU_MIPSR2 config CPU_MIPSR5 bool - default y if CPU_MIPS32_R5 || CPU_MIPS64_R5 + default y if CPU_MIPS32_R5 || CPU_MIPS64_R5 || CPU_P5600 select CPU_HAS_RIXI select CPU_HAS_DIEI if !CPU_DIEI_BROKEN select MIPS_SPRAM @@ -2689,7 +2716,7 @@ config RELOCATABLE depends on CPU_MIPS32_R2 || CPU_MIPS64_R2 || \ CPU_MIPS32_R5 || CPU_MIPS64_R5 || \ CPU_MIPS32_R6 || CPU_MIPS64_R6 || \ - CAVIUM_OCTEON_SOC + CPU_P5600 || CAVIUM_OCTEON_SOC help This builds a kernel image that retains relocation information so it can be loaded someplace besides the default 1MB. diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 5d7a33ae86a4..0d0f29d662c9 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -152,6 +152,7 @@ cflags-$(CONFIG_CPU_MIPS64_R1) += -march=mips64 -Wa,--trap cflags-$(CONFIG_CPU_MIPS64_R2) += -march=mips64r2 -Wa,--trap cflags-$(CONFIG_CPU_MIPS64_R5) += -march=mips64r5 -Wa,--trap cflags-$(CONFIG_CPU_MIPS64_R6) += -march=mips64r6 -Wa,--trap +cflags-$(CONFIG_CPU_P5600) += -march=p5600 -Wa,--trap -modd-spreg cflags-$(CONFIG_CPU_R5000) += -march=r5000 -Wa,--trap cflags-$(CONFIG_CPU_R5500) += $(call cc-option,-march=r5500,-march=r5000) \ -Wa,--trap diff --git a/arch/mips/include/asm/module.h b/arch/mips/include/asm/module.h index 84776e1ec8e5..7be4c68081a8 100644 --- a/arch/mips/include/asm/module.h +++ b/arch/mips/include/asm/module.h @@ -131,6 +131,8 @@ search_module_dbetables(unsigned long addr) #define MODULE_PROC_FAMILY "LOONGSON64 " #elif defined CONFIG_CPU_CAVIUM_OCTEON #define MODULE_PROC_FAMILY "OCTEON " +#elif defined CONFIG_CPU_P5600 +#define MODULE_PROC_FAMILY "P5600 " #elif defined CONFIG_CPU_XLR #define MODULE_PROC_FAMILY "XLR " #elif defined CONFIG_CPU_XLP