[PATCH] powerpc: Merge cacheflush.h and cache.h

The ppc32 and ppc64 versions of cacheflush.h were almost identical.
The two versions of cache.h are fairly similar, except for a bunch of
register definitions in the ppc32 version which probably belong better
elsewhere.  This patch, therefore, merges both headers.  Notable
points:
	- there are several functions in cacheflush.h which exist only
on ppc32 or only on ppc64.  These are handled by #ifdef for now, but
these should probably be consolidated, along with the actual code
behind them later.
	- Confusingly, both ppc32 and ppc64 have a
flush_dcache_range(), but they're subtly different: it uses dcbf on
ppc32 and dcbst on ppc64, ppc64 has a flush_inval_dcache_range() which
uses dcbf.  These too should be merged and consolidated later.
	- Also flush_dcache_range() was defined in cacheflush.h on
ppc64, and in cache.h on ppc32.  In the merged version it's in
cacheflush.h
	- On ppc32 flush_icache_range() is a normal function from
misc.S.  On ppc64, it was wrapper, testing a feature bit before
calling __flush_icache_range() which does the actual flush.  This
patch takes the ppc64 approach, which amounts to no change on ppc32,
since CPU_FTR_COHERENT_ICACHE will never be set there, but does mean
renaming flush_icache_range() to __flush_icache_range() in
arch/ppc/kernel/misc.S and arch/powerpc/kernel/misc_32.S
	- The PReP register info from asm-ppc/cache.h has moved to
arch/ppc/platforms/prep_setup.c
	- The 8xx register info from asm-ppc/cache.h has moved to a
new asm-powerpc/reg_8xx.h, included from reg.h
	- flush_dcache_all() was defined on ppc32 (only), but was
never called (although it was exported).  Thus this patch removes it
from cacheflush.h and from ARCH=powerpc (misc_32.S) entirely.  It's
left in ARCH=ppc for now, with the prototype moved to ppc_ksyms.c.

Built for Walnut (ARCH=ppc), 32-bit multiplatform (pmac, CHRP and PReP
ARCH=ppc, pmac and CHRP ARCH=powerpc).  Built and booted on POWER5
LPAR (ARCH=powerpc and ARCH=ppc64).

Built for 32-bit powermac (ARCH=ppc and ARCH=powerpc).  Built and
booted on POWER5 LPAR (ARCH=powerpc and ARCH=ppc64).  Built and booted
on G5 (ARCH=powerpc)

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
This commit is contained in:
David Gibson 2005-11-10 11:50:16 +11:00 committed by Paul Mackerras
parent e130bedb7c
commit 26ef5c0957
10 changed files with 105 additions and 179 deletions

View File

@ -519,7 +519,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_SPLIT_ID_CACHE)
*
* flush_icache_range(unsigned long start, unsigned long stop)
*/
_GLOBAL(flush_icache_range)
_GLOBAL(__flush_icache_range)
BEGIN_FTR_SECTION
blr /* for 601, do nothing */
END_FTR_SECTION_IFCLR(CPU_FTR_SPLIT_ID_CACHE)
@ -607,27 +607,6 @@ _GLOBAL(invalidate_dcache_range)
sync /* wait for dcbi's to get to ram */
blr
#ifdef CONFIG_NOT_COHERENT_CACHE
/*
* 40x cores have 8K or 16K dcache and 32 byte line size.
* 44x has a 32K dcache and 32 byte line size.
* 8xx has 1, 2, 4, 8K variants.
* For now, cover the worst case of the 44x.
* Must be called with external interrupts disabled.
*/
#define CACHE_NWAYS 64
#define CACHE_NLINES 16
_GLOBAL(flush_dcache_all)
li r4, (2 * CACHE_NWAYS * CACHE_NLINES)
mtctr r4
lis r5, KERNELBASE@h
1: lwz r3, 0(r5) /* Load one word from every line */
addi r5, r5, L1_CACHE_BYTES
bdnz 1b
blr
#endif /* CONFIG_NOT_COHERENT_CACHE */
/*
* Flush a particular page from the data cache to RAM.
* Note: this is necessary because the instruction cache does *not*

View File

@ -497,9 +497,9 @@ END_FTR_SECTION_IFCLR(CPU_FTR_SPLIT_ID_CACHE)
* and invalidate the corresponding instruction cache blocks.
* This is a no-op on the 601.
*
* flush_icache_range(unsigned long start, unsigned long stop)
* __flush_icache_range(unsigned long start, unsigned long stop)
*/
_GLOBAL(flush_icache_range)
_GLOBAL(__flush_icache_range)
BEGIN_FTR_SECTION
blr /* for 601, do nothing */
END_FTR_SECTION_IFCLR(CPU_FTR_SPLIT_ID_CACHE)

View File

@ -175,6 +175,7 @@ EXPORT_SYMBOL(pci_bus_to_phys);
#endif /* CONFIG_PCI */
#ifdef CONFIG_NOT_COHERENT_CACHE
extern void flush_dcache_all(void);
EXPORT_SYMBOL(flush_dcache_all);
#endif

View File

@ -61,6 +61,15 @@
#include <asm/pci-bridge.h>
#include <asm/todc.h>
/* prep registers for L2 */
#define CACHECRBA 0x80000823 /* Cache configuration register address */
#define L2CACHE_MASK 0x03 /* Mask for 2 L2 Cache bits */
#define L2CACHE_512KB 0x00 /* 512KB */
#define L2CACHE_256KB 0x01 /* 256KB */
#define L2CACHE_1MB 0x02 /* 1MB */
#define L2CACHE_NONE 0x03 /* NONE */
#define L2CACHE_PARITY 0x08 /* Mask for L2 Cache Parity Protected bit */
TODC_ALLOC();
unsigned char ucSystemType;

View File

@ -0,0 +1,40 @@
#ifndef _ASM_POWERPC_CACHE_H
#define _ASM_POWERPC_CACHE_H
#ifdef __KERNEL__
#include <linux/config.h>
/* bytes per L1 cache line */
#if defined(CONFIG_8xx) || defined(CONFIG_403GCX)
#define L1_CACHE_SHIFT 4
#define MAX_COPY_PREFETCH 1
#elif defined(CONFIG_PPC32)
#define L1_CACHE_SHIFT 5
#define MAX_COPY_PREFETCH 4
#else /* CONFIG_PPC64 */
#define L1_CACHE_SHIFT 7
#endif
#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT)
#define SMP_CACHE_BYTES L1_CACHE_BYTES
#define L1_CACHE_SHIFT_MAX 7 /* largest L1 which this arch supports */
#if defined(__powerpc64__) && !defined(__ASSEMBLY__)
struct ppc64_caches {
u32 dsize; /* L1 d-cache size */
u32 dline_size; /* L1 d-cache line size */
u32 log_dline_size;
u32 dlines_per_page;
u32 isize; /* L1 i-cache size */
u32 iline_size; /* L1 i-cache line size */
u32 log_iline_size;
u32 ilines_per_page;
};
extern struct ppc64_caches ppc64_caches;
#endif /* __powerpc64__ && ! __ASSEMBLY__ */
#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_CACHE_H */

View File

@ -1,13 +1,20 @@
#ifndef _PPC64_CACHEFLUSH_H
#define _PPC64_CACHEFLUSH_H
/*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#ifndef _ASM_POWERPC_CACHEFLUSH_H
#define _ASM_POWERPC_CACHEFLUSH_H
#ifdef __KERNEL__
#include <linux/mm.h>
#include <asm/cputable.h>
/*
* No cache flushing is required when address mappings are
* changed, because the caches on PowerPCs are physically
* addressed.
* No cache flushing is required when address mappings are changed,
* because the caches on PowerPCs are physically addressed.
*/
#define flush_cache_all() do { } while (0)
#define flush_cache_mm(mm) do { } while (0)
@ -22,27 +29,40 @@ extern void flush_dcache_page(struct page *page);
#define flush_dcache_mmap_unlock(mapping) do { } while (0)
extern void __flush_icache_range(unsigned long, unsigned long);
extern void flush_icache_user_range(struct vm_area_struct *vma,
struct page *page, unsigned long addr,
int len);
extern void flush_dcache_range(unsigned long start, unsigned long stop);
extern void flush_dcache_phys_range(unsigned long start, unsigned long stop);
extern void flush_inval_dcache_range(unsigned long start, unsigned long stop);
#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
do { memcpy(dst, src, len); \
flush_icache_user_range(vma, page, vaddr, len); \
} while (0)
#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
memcpy(dst, src, len)
extern void __flush_dcache_icache(void *page_va);
static inline void flush_icache_range(unsigned long start, unsigned long stop)
{
if (!cpu_has_feature(CPU_FTR_COHERENT_ICACHE))
__flush_icache_range(start, stop);
}
#endif /* _PPC64_CACHEFLUSH_H */
extern void flush_icache_user_range(struct vm_area_struct *vma,
struct page *page, unsigned long addr,
int len);
extern void __flush_dcache_icache(void *page_va);
extern void flush_dcache_icache_page(struct page *page);
#if defined(CONFIG_PPC32) && !defined(CONFIG_BOOKE)
extern void __flush_dcache_icache_phys(unsigned long physaddr);
#endif /* CONFIG_PPC32 && !CONFIG_BOOKE */
extern void flush_dcache_range(unsigned long start, unsigned long stop);
#ifdef CONFIG_PPC32
extern void clean_dcache_range(unsigned long start, unsigned long stop);
extern void invalidate_dcache_range(unsigned long start, unsigned long stop);
#endif /* CONFIG_PPC32 */
#ifdef CONFIG_PPC64
extern void flush_inval_dcache_range(unsigned long start, unsigned long stop);
extern void flush_dcache_phys_range(unsigned long start, unsigned long stop);
#endif
#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
do { \
memcpy(dst, src, len); \
flush_icache_user_range(vma, page, vaddr, len); \
} while (0)
#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
memcpy(dst, src, len)
#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_CACHEFLUSH_H */

View File

@ -16,7 +16,11 @@
/* Pickup Book E specific registers. */
#if defined(CONFIG_BOOKE) || defined(CONFIG_40x)
#include <asm/reg_booke.h>
#endif
#endif /* CONFIG_BOOKE || CONFIG_40x */
#ifdef CONFIG_8xx
#include <asm/reg_8xx.h>
#endif /* CONFIG_8xx */
#define MSR_SF_LG 63 /* Enable 64 bit mode */
#define MSR_ISF_LG 61 /* Interrupt 64b mode valid on 630 */

View File

@ -1,49 +1,9 @@
/*
* include/asm-ppc/cache.h
* Contains register definitions common to PowerPC 8xx CPUs. Notice
*/
#ifdef __KERNEL__
#ifndef __ARCH_PPC_CACHE_H
#define __ARCH_PPC_CACHE_H
#ifndef _ASM_POWERPC_REG_8xx_H
#define _ASM_POWERPC_REG_8xx_H
#include <linux/config.h>
/* bytes per L1 cache line */
#if defined(CONFIG_8xx) || defined(CONFIG_403GCX)
#define L1_CACHE_SHIFT 4
#define MAX_COPY_PREFETCH 1
#elif defined(CONFIG_PPC64BRIDGE)
#define L1_CACHE_SHIFT 7
#define MAX_COPY_PREFETCH 1
#else
#define L1_CACHE_SHIFT 5
#define MAX_COPY_PREFETCH 4
#endif
#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT)
#define SMP_CACHE_BYTES L1_CACHE_BYTES
#define L1_CACHE_SHIFT_MAX 7 /* largest L1 which this arch supports */
#define L1_CACHE_ALIGN(x) (((x)+(L1_CACHE_BYTES-1))&~(L1_CACHE_BYTES-1))
#define L1_CACHE_PAGES 8
#ifndef __ASSEMBLY__
extern void clean_dcache_range(unsigned long start, unsigned long stop);
extern void flush_dcache_range(unsigned long start, unsigned long stop);
extern void invalidate_dcache_range(unsigned long start, unsigned long stop);
extern void flush_dcache_all(void);
#endif /* __ASSEMBLY__ */
/* prep registers for L2 */
#define CACHECRBA 0x80000823 /* Cache configuration register address */
#define L2CACHE_MASK 0x03 /* Mask for 2 L2 Cache bits */
#define L2CACHE_512KB 0x00 /* 512KB */
#define L2CACHE_256KB 0x01 /* 256KB */
#define L2CACHE_1MB 0x02 /* 1MB */
#define L2CACHE_NONE 0x03 /* NONE */
#define L2CACHE_PARITY 0x08 /* Mask for L2 Cache Parity Protected bit */
#ifdef CONFIG_8xx
/* Cache control on the MPC8xx is provided through some additional
* special purpose registers.
*/
@ -78,7 +38,5 @@ extern void flush_dcache_all(void);
#define DC_DFWT 0x40000000 /* Data cache is forced write through */
#define DC_LES 0x20000000 /* Caches are little endian mode */
#endif /* CONFIG_8xx */
#endif
#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_REG_8xx_H */

View File

@ -1,49 +0,0 @@
/*
* include/asm-ppc/cacheflush.h
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#ifdef __KERNEL__
#ifndef _PPC_CACHEFLUSH_H
#define _PPC_CACHEFLUSH_H
#include <linux/mm.h>
/*
* No cache flushing is required when address mappings are
* changed, because the caches on PowerPCs are physically
* addressed. -- paulus
* Also, when SMP we use the coherency (M) bit of the
* BATs and PTEs. -- Cort
*/
#define flush_cache_all() do { } while (0)
#define flush_cache_mm(mm) do { } while (0)
#define flush_cache_range(vma, a, b) do { } while (0)
#define flush_cache_page(vma, p, pfn) do { } while (0)
#define flush_icache_page(vma, page) do { } while (0)
#define flush_cache_vmap(start, end) do { } while (0)
#define flush_cache_vunmap(start, end) do { } while (0)
extern void flush_dcache_page(struct page *page);
#define flush_dcache_mmap_lock(mapping) do { } while (0)
#define flush_dcache_mmap_unlock(mapping) do { } while (0)
extern void flush_icache_range(unsigned long, unsigned long);
extern void flush_icache_user_range(struct vm_area_struct *vma,
struct page *page, unsigned long addr, int len);
#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
do { memcpy(dst, src, len); \
flush_icache_user_range(vma, page, vaddr, len); \
} while (0)
#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
memcpy(dst, src, len)
extern void __flush_dcache_icache(void *page_va);
extern void __flush_dcache_icache_phys(unsigned long physaddr);
extern void flush_dcache_icache_page(struct page *page);
#endif /* _PPC_CACHEFLUSH_H */
#endif /* __KERNEL__ */

View File

@ -1,36 +0,0 @@
/*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#ifndef __ARCH_PPC64_CACHE_H
#define __ARCH_PPC64_CACHE_H
#include <asm/types.h>
/* bytes per L1 cache line */
#define L1_CACHE_SHIFT 7
#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT)
#define SMP_CACHE_BYTES L1_CACHE_BYTES
#define L1_CACHE_SHIFT_MAX 7 /* largest L1 which this arch supports */
#ifndef __ASSEMBLY__
struct ppc64_caches {
u32 dsize; /* L1 d-cache size */
u32 dline_size; /* L1 d-cache line size */
u32 log_dline_size;
u32 dlines_per_page;
u32 isize; /* L1 i-cache size */
u32 iline_size; /* L1 i-cache line size */
u32 log_iline_size;
u32 ilines_per_page;
};
extern struct ppc64_caches ppc64_caches;
#endif
#endif