qlge: convert to net_device_ops

Convert driver to new net_device_ops. Compile tested only.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Stephen Hemminger 2008-11-21 17:29:16 -08:00 committed by David S. Miller
parent 040250959d
commit 25ed784910

View File

@ -3715,6 +3715,22 @@ err_out:
return err;
}
static const struct net_device_ops qlge_netdev_ops = {
.ndo_open = qlge_open,
.ndo_stop = qlge_close,
.ndo_start_xmit = qlge_send,
.ndo_change_mtu = qlge_change_mtu,
.ndo_get_stats = qlge_get_stats,
.ndo_set_multicast_list = qlge_set_multicast_list,
.ndo_set_mac_address = qlge_set_mac_address,
.ndo_validate_addr = eth_validate_addr,
.ndo_tx_timeout = qlge_tx_timeout,
.ndo_vlan_rx_register = ql_vlan_rx_register,
.ndo_vlan_rx_add_vid = ql_vlan_rx_add_vid,
.ndo_vlan_rx_kill_vid = ql_vlan_rx_kill_vid,
};
static int __devinit qlge_probe(struct pci_dev *pdev,
const struct pci_device_id *pci_entry)
{
@ -3752,19 +3768,11 @@ static int __devinit qlge_probe(struct pci_dev *pdev,
*/
ndev->tx_queue_len = qdev->tx_ring_size;
ndev->irq = pdev->irq;
ndev->open = qlge_open;
ndev->stop = qlge_close;
ndev->hard_start_xmit = qlge_send;
ndev->netdev_ops = &qlge_netdev_ops;
SET_ETHTOOL_OPS(ndev, &qlge_ethtool_ops);
ndev->change_mtu = qlge_change_mtu;
ndev->get_stats = qlge_get_stats;
ndev->set_multicast_list = qlge_set_multicast_list;
ndev->set_mac_address = qlge_set_mac_address;
ndev->tx_timeout = qlge_tx_timeout;
ndev->watchdog_timeo = 10 * HZ;
ndev->vlan_rx_register = ql_vlan_rx_register;
ndev->vlan_rx_add_vid = ql_vlan_rx_add_vid;
ndev->vlan_rx_kill_vid = ql_vlan_rx_kill_vid;
err = register_netdev(ndev);
if (err) {
dev_err(&pdev->dev, "net device registration failed.\n");