Merge branch 'for-next' into for-linus

Documentation/devicetree/bindings/sound/adi,axi-i2s.txt

@@ -0,0 +1,31 @@
+ADI AXI-I2S controller
+
+Required properties:
+ - compatible : Must be "adi,axi-i2s-1.00.a"
+ - reg : Must contain I2S core's registers location and length
+ - clocks : Pairs of phandle and specifier referencing the controller's clocks.
+   The controller expects two clocks, the clock used for the AXI interface and
+   the clock used as the sampling rate reference clock sample.
+ - clock-names : "axi" for the clock to the AXI interface, "ref" for the sample
+   rate reference clock.
+ - dmas: Pairs of phandle and specifier for the DMA channels that are used by
+   the core. The core expects two dma channels, one for transmit and one for
+   receive.
+ - dma-names : "tx" for the transmit channel, "rx" for the receive channel.
+
+For more details on the 'dma', 'dma-names', 'clock' and 'clock-names' properties
+please check:
+	* resource-names.txt
+	* clock/clock-bindings.txt
+	* dma/dma.txt
+
+Example:
+
+	i2s: i2s@0x77600000 {
+		compatible = "adi,axi-i2s-1.00.a";
+		reg = <0x77600000 0x1000>;
+		clocks = <&clk 15>, <&audio_clock>;
+		clock-names = "axi", "ref";
+		dmas = <&ps7_dma 0>, <&ps7_dma 1>;
+		dma-names = "tx", "rx";
+	};

Documentation/devicetree/bindings/sound/adi,axi-spdif-tx.txt

@@ -0,0 +1,30 @@
+ADI AXI-SPDIF controller
+
+Required properties:
+ - compatible : Must be "adi,axi-spdif-1.00.a"
+ - reg : Must contain SPDIF core's registers location and length
+ - clocks : Pairs of phandle and specifier referencing the controller's clocks.
+   The controller expects two clocks, the clock used for the AXI interface and
+   the clock used as the sampling rate reference clock sample.
+ - clock-names: "axi" for the clock to the AXI interface, "ref" for the sample
+   rate reference clock.
+ - dmas: Pairs of phandle and specifier for the DMA channel that is used by
+   the core. The core expects one dma channel for transmit.
+ - dma-names : Must be "tx"
+
+For more details on the 'dma', 'dma-names', 'clock' and 'clock-names' properties
+please check:
+	* resource-names.txt
+	* clock/clock-bindings.txt
+	* dma/dma.txt
+
+Example:
+
+	spdif: spdif@0x77400000 {
+		compatible = "adi,axi-spdif-tx-1.00.a";
+		reg = <0x77600000 0x1000>;
+		clocks = <&clk 15>, <&audio_clock>;
+		clock-names = "axi", "ref";
+		dmas = <&ps7_dma 0>;
+		dma-names = "tx";
+	};

Documentation/devicetree/bindings/sound/bcm2835-i2s.txt

@@ -0,0 +1,25 @@
+* Broadcom BCM2835 SoC I2S/PCM module
+
+Required properties:
+- compatible: "brcm,bcm2835-i2s"
+- reg: A list of base address and size entries:
+	* The first entry should cover the PCM registers
+	* The second entry should cover the PCM clock registers
+- dmas: List of DMA controller phandle and DMA request line ordered pairs.
+- dma-names: Identifier string for each DMA request line in the dmas property.
+  These strings correspond 1:1 with the ordered pairs in dmas.
+
+  One of the DMA channels will be responsible for transmission (should be
+  named "tx") and one for reception (should be named "rx").
+
+Example:
+
+bcm2835_i2s: i2s@7e203000 {
+	compatible = "brcm,bcm2835-i2s";
+	reg = <0x7e203000 0x20>,
+	      <0x7e101098 0x02>;
+
+	dmas = <&dma 2>,
+	       <&dma 3>;
+	dma-names = "tx", "rx";
+};

Documentation/devicetree/bindings/sound/cs42l52.txt

@@ -0,0 +1,46 @@
+CS42L52 audio CODEC
+
+Required properties:
+
+  - compatible : "cirrus,cs42l52"
+
+  - reg : the I2C address of the device for I2C
+
+Optional properties:
+
+  - cirrus,reset-gpio : GPIO controller's phandle and the number
+  of the GPIO used to reset the codec.
+
+  - cirrus,chgfreq-divisor : Values used to set the Charge Pump Frequency.
+  Allowable values of 0x00 through 0x0F. These are raw values written to the
+  register, not the actual frequency. The frequency is determined by the following.
+  Frequency = (64xFs)/(N+2)
+  N = chgfreq_val
+  Fs = Sample Rate (variable)
+
+  - cirrus,mica-differential-cfg : boolean, If present, then the MICA input is configured
+  as a differential input. If not present then the MICA input is configured as
+  Single-ended input. Single-ended mode allows for MIC1 or MIC2 muxing for input.
+
+  - cirrus,micb-differential-cfg : boolean, If present, then the MICB input is configured
+  as a differential input. If not present then the MICB input is configured as
+  Single-ended input. Single-ended mode allows for MIC1 or MIC2 muxing for input.
+
+  - cirrus,micbias-lvl: Set the output voltage level on the MICBIAS Pin
+  0 = 0.5 x VA
+  1 = 0.6 x VA
+  2 = 0.7 x VA
+  3 = 0.8 x VA
+  4 = 0.83 x VA
+  5 = 0.91 x VA
+
+Example:
+
+codec: codec@4a {
+	compatible = "cirrus,cs42l52";
+	reg = <0x4a>;
+	reset-gpio = <&gpio 10 0>;
+	cirrus,chgfreq-divisor = <0x05>;
+	cirrus.mica-differential-cfg;
+	cirrus,micbias-lvl = <5>;
+};

Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt

@@ -4,7 +4,8 @@ Required properties:
 - compatible :
 	"ti,dm646x-mcasp-audio"	: for DM646x platforms
 	"ti,da830-mcasp-audio"	: for both DA830 & DA850 platforms
-	"ti,am33xx-mcasp-audio"	: for AM33xx platforms (AM33xx, TI81xx)
+	"ti,am33xx-mcasp-audio"	: for AM33xx platforms (AM33xx, AM43xx, TI81xx)
+	"ti,dra7-mcasp-audio"	: for DRA7xx platforms
 
 - reg : Should contain reg specifiers for the entries in the reg-names property.
 - reg-names : Should contain:
@@ -36,7 +37,8 @@ Optional properties:
 - pinctrl-0: Should specify pin control group used for this controller.
 - pinctrl-names: Should contain only one value - "default", for more details
   		 please refer to pinctrl-bindings.txt
-  
+- fck_parent : Should contain a valid clock name which will be used as parent
+	       for the McASP fck
 
 Example:
 

Documentation/devicetree/bindings/sound/fsl,esai.txt

@@ -0,0 +1,50 @@
+Freescale Enhanced Serial Audio Interface (ESAI) Controller
+
+The Enhanced Serial Audio Interface (ESAI) provides a full-duplex serial port
+for serial communication with a variety of serial devices, including industry
+standard codecs, Sony/Phillips Digital Interface (S/PDIF) transceivers, and
+other DSPs. It has up to six transmitters and four receivers.
+
+Required properties:
+
+  - compatible : Compatible list, must contain "fsl,imx35-esai".
+
+  - reg : Offset and length of the register set for the device.
+
+  - interrupts : Contains the spdif interrupt.
+
+  - dmas : Generic dma devicetree binding as described in
+  Documentation/devicetree/bindings/dma/dma.txt.
+
+  - dma-names : Two dmas have to be defined, "tx" and "rx".
+
+  - clocks: Contains an entry for each entry in clock-names.
+
+  - clock-names : Includes the following entries:
+	"core"		The core clock used to access registers
+	"extal"		The esai baud clock for esai controller used to derive
+			HCK, SCK and FS.
+	"fsys"		The system clock derived from ahb clock used to derive
+			HCK, SCK and FS.
+
+  - fsl,fifo-depth: The number of elements in the transmit and receive FIFOs.
+    This number is the maximum allowed value for TFCR[TFWM] or RFCR[RFWM].
+
+  - fsl,esai-synchronous: This is a boolean property. If present, indicating
+    that ESAI would work in the synchronous mode, which means all the settings
+    for Receiving would be duplicated from Transmition related registers.
+
+Example:
+
+esai: esai@02024000 {
+	compatible = "fsl,imx35-esai";
+	reg = <0x02024000 0x4000>;
+	interrupts = <0 51 0x04>;
+	clocks = <&clks 208>, <&clks 118>, <&clks 208>;
+	clock-names = "core", "extal", "fsys";
+	dmas = <&sdma 23 21 0>, <&sdma 24 21 0>;
+	dma-names = "rx", "tx";
+	fsl,fifo-depth = <128>;
+	fsl,esai-synchronous;
+	status = "disabled";
+};

Documentation/devicetree/bindings/sound/fsl,ssi.txt

@@ -4,7 +4,12 @@ The SSI is a serial device that communicates with audio codecs.  It can
 be programmed in AC97, I2S, left-justified, or right-justified modes.
 
 Required properties:
-- compatible:       Compatible list, contains "fsl,ssi".
+- compatible:       Compatible list, should contain one of the following
+                    compatibles:
+                      fsl,mpc8610-ssi
+                      fsl,imx51-ssi
+                      fsl,imx35-ssi
+                      fsl,imx21-ssi
 - cell-index:       The SSI, <0> = SSI1, <1> = SSI2, and so on.
 - reg:              Offset and length of the register set for the device.
 - interrupts:       <a b> where a is the interrupt number and b is a

Documentation/devicetree/bindings/sound/fsl-sai.txt

@@ -0,0 +1,40 @@
+Freescale Synchronous Audio Interface (SAI).
+
+The SAI is based on I2S module that used communicating with audio codecs,
+which provides a synchronous audio interface that supports fullduplex
+serial interfaces with frame synchronization such as I2S, AC97, TDM, and
+codec/DSP interfaces.
+
+
+Required properties:
+- compatible: Compatible list, contains "fsl,vf610-sai".
+- reg: Offset and length of the register set for the device.
+- clocks: Must contain an entry for each entry in clock-names.
+- clock-names : Must include the "sai" entry.
+- dmas : Generic dma devicetree binding as described in
+  Documentation/devicetree/bindings/dma/dma.txt.
+- dma-names : Two dmas have to be defined, "tx" and "rx".
+- pinctrl-names: Must contain a "default" entry.
+- pinctrl-NNN: One property must exist for each entry in pinctrl-names.
+  See ../pinctrl/pinctrl-bindings.txt for details of the property values.
+- big-endian-regs: If this property is absent, the little endian mode will
+  be in use as default, or the big endian mode will be in use for all the
+  device registers.
+- big-endian-data: If this property is absent, the little endian mode will
+  be in use as default, or the big endian mode will be in use for all the
+  fifo data.
+
+Example:
+sai2: sai@40031000 {
+	      compatible = "fsl,vf610-sai";
+	      reg = <0x40031000 0x1000>;
+	      pinctrl-names = "default";
+	      pinctrl-0 = <&pinctrl_sai2_1>;
+	      clocks = <&clks VF610_CLK_SAI2>;
+	      clock-names = "sai";
+	      dma-names = "tx", "rx";
+	      dmas = <&edma0 0 VF610_EDMA_MUXID0_SAI2_TX>,
+		   <&edma0 0 VF610_EDMA_MUXID0_SAI2_RX>;
+	      big-endian-regs;
+	      big-endian-data;
+};

Documentation/devicetree/bindings/sound/hdmi.txt

@@ -0,0 +1,17 @@
+Device-Tree bindings for dummy HDMI codec
+
+Required properties:
+	- compatible: should be "linux,hdmi-audio".
+
+CODEC output pins:
+  * TX
+
+CODEC input pins:
+  * RX
+
+Example node:
+
+	hdmi_audio: hdmi_audio@0 {
+		compatible = "linux,hdmi-audio";
+		status = "okay";
+	};

Documentation/devicetree/bindings/sound/max98090.txt

@@ -0,0 +1,43 @@
+MAX98090 audio CODEC
+
+This device supports I2C only.
+
+Required properties:
+
+- compatible : "maxim,max98090".
+
+- reg : The I2C address of the device.
+
+- interrupts : The CODEC's interrupt output.
+
+Pins on the device (for linking into audio routes):
+
+  * MIC1
+  * MIC2
+  * DMICL
+  * DMICR
+  * IN1
+  * IN2
+  * IN3
+  * IN4
+  * IN5
+  * IN6
+  * IN12
+  * IN34
+  * IN56
+  * HPL
+  * HPR
+  * SPKL
+  * SPKR
+  * RCVL
+  * RCVR
+  * MICBIAS
+
+Example:
+
+audio-codec@10 {
+	compatible = "maxim,max98090";
+	reg = <0x10>;
+	interrupt-parent = <&gpio>;
+	interrupts = <TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>;
+};

Documentation/devicetree/bindings/sound/nvidia,tegra-audio-max98090.txt

@@ -0,0 +1,51 @@
+NVIDIA Tegra audio complex, with MAX98090 CODEC
+
+Required properties:
+- compatible : "nvidia,tegra-audio-max98090"
+- clocks : Must contain an entry for each entry in clock-names.
+  See ../clocks/clock-bindings.txt for details.
+- clock-names : Must include the following entries:
+  - pll_a
+  - pll_a_out0
+  - mclk (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
+- nvidia,model : The user-visible name of this sound complex.
+- nvidia,audio-routing : A list of the connections between audio components.
+  Each entry is a pair of strings, the first being the connection's sink,
+  the second being the connection's source. Valid names for sources and
+  sinks are the MAX98090's pins (as documented in its binding), and the jacks
+  on the board:
+
+  * Headphones
+  * Speakers
+  * Mic Jack
+
+- nvidia,i2s-controller : The phandle of the Tegra I2S controller that's
+  connected to the CODEC.
+- nvidia,audio-codec : The phandle of the MAX98090 audio codec.
+
+Optional properties:
+- nvidia,hp-det-gpios : The GPIO that detect headphones are plugged in
+
+Example:
+
+sound {
+	compatible = "nvidia,tegra-audio-max98090-venice2",
+		     "nvidia,tegra-audio-max98090";
+	nvidia,model = "NVIDIA Tegra Venice2";
+
+	nvidia,audio-routing =
+		"Headphones", "HPR",
+		"Headphones", "HPL",
+		"Speakers", "SPKR",
+		"Speakers", "SPKL",
+		"Mic Jack", "MICBIAS",
+		"IN34", "Mic Jack";
+
+	nvidia,i2s-controller = <&tegra_i2s1>;
+	nvidia,audio-codec = <&acodec>;
+
+	clocks = <&tegra_car TEGRA124_CLK_PLL_A>,
+		 <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
+		 <&tegra_car TEGRA124_CLK_EXTERN1>;
+	clock-names = "pll_a", "pll_a_out0", "mclk";
+};

Documentation/devicetree/bindings/sound/simple-card.txt

@@ -0,0 +1,77 @@
+Simple-Card:
+
+Simple-Card specifies audio DAI connection of SoC <-> codec.
+
+Required properties:
+
+- compatible				: "simple-audio-card"
+
+Optional properties:
+
+- simple-audio-card,format		: CPU/CODEC common audio format.
+					  "i2s", "right_j", "left_j" , "dsp_a"
+					  "dsp_b", "ac97", "pdm", "msb", "lsb"
+- simple-audio-card,routing		: A list of the connections between audio components.
+					  Each entry is a pair of strings, the first being the
+					  connection's sink, the second being the connection's
+					  source.
+
+Required subnodes:
+
+- simple-audio-card,cpu			: CPU   sub-node
+- simple-audio-card,codec		: CODEC sub-node
+
+Required CPU/CODEC subnodes properties:
+
+- sound-dai				: phandle and port of CPU/CODEC
+
+Optional CPU/CODEC subnodes properties:
+
+- format				: CPU/CODEC specific audio format if needed.
+					  see simple-audio-card,format
+- frame-master				: bool property. add this if subnode is frame master
+- bitclock-master			: bool property. add this if subnode is bitclock master
+- bitclock-inversion			: bool property. add this if subnode has clock inversion
+- frame-inversion			: bool property. add this if subnode has frame inversion
+- clocks / system-clock-frequency	: specify subnode's clock if needed.
+					  it can be specified via "clocks" if system has
+					  clock node (= common clock), or "system-clock-frequency"
+					  (if system doens't support common clock)
+
+Example:
+
+sound {
+	compatible = "simple-audio-card";
+	simple-audio-card,format = "left_j";
+	simple-audio-routing =
+		"MIC_IN", "Mic Jack",
+		"Headphone Jack", "HP_OUT",
+		"Ext Spk", "LINE_OUT";
+
+	simple-audio-card,cpu {
+		sound-dai = <&sh_fsi2 0>;
+	};
+
+	simple-audio-card,codec {
+		sound-dai = <&ak4648>;
+		bitclock-master;
+		frame-master;
+		clocks = <&osc>;
+	};
+};
+
+&i2c0 {
+	ak4648: ak4648@12 {
+		#sound-dai-cells = <0>;
+		compatible = "asahi-kasei,ak4648";
+		reg = <0x12>;
+	};
+};
+
+sh_fsi2: sh_fsi2@ec230000 {
+	#sound-dai-cells = <1>;
+	compatible = "renesas,sh_fsi2";
+	reg = <0xec230000 0x400>;
+	interrupt-parent = <&gic>;
+	interrupts = <0 146 0x4>;
+};

Documentation/devicetree/bindings/sound/tlv320aic3x.txt

@@ -6,6 +6,7 @@ Required properties:
 
 - compatible - "string" - One of:
     "ti,tlv320aic3x" - Generic TLV320AIC3x device
+    "ti,tlv320aic32x4" - TLV320AIC32x4
     "ti,tlv320aic33" - TLV320AIC33
     "ti,tlv320aic3007" - TLV320AIC3007
     "ti,tlv320aic3106" - TLV320AIC3106

Documentation/sound/alsa/soc/overview.txt

@@ -49,18 +49,23 @@ features :-
   * Machine specific controls: Allow machines to add controls to the sound card
     (e.g. volume control for speaker amplifier).
 
-To achieve all this, ASoC basically splits an embedded audio system into 3
+To achieve all this, ASoC basically splits an embedded audio system into
-components :-
+multiple re-usable component drivers :-
 
-  * Codec driver: The codec driver is platform independent and contains audio
+  * Codec class drivers: The codec class driver is platform independent and
-    controls, audio interface capabilities, codec DAPM definition and codec IO
+    contains audio controls, audio interface capabilities, codec DAPM
-    functions.
+    definition and codec IO functions. This class extends to BT, FM and MODEM
+    ICs if required. Codec class drivers should be generic code that can run
+    on any architecture and machine.
 
-  * Platform driver: The platform driver contains the audio DMA engine and audio
+  * Platform class drivers: The platform class driver includes the audio DMA
-    interface drivers (e.g. I2S, AC97, PCM) for that platform.
+    engine driver, digital audio interface (DAI) drivers (e.g. I2S, AC97, PCM)
+    and any audio DSP drivers for that platform.
 
-  * Machine driver: The machine driver handles any machine specific controls and
+  * Machine class driver: The machine driver class acts as the glue that
-    audio events (e.g. turning on an amp at start of playback).
+    decribes and binds the other component drivers together to form an ALSA
+    "sound card device". It handles any machine specific controls and
+    machine level audio events (e.g. turning on an amp at start of playback).
 
 
 Documentation
@@ -84,3 +89,7 @@ machine.txt: Machine driver internals.
 pop_clicks.txt: How to minimise audio artifacts.
 
 clocking.txt: ASoC clocking for best power performance.
+
+jack.txt: ASoC jack detection.
+
+DPCM.txt: Dynamic PCM - Describes DPCM with DSP examples.

arch/arm/Kconfig

@@ -723,6 +723,7 @@ config ARCH_S3C64XX
 	bool "Samsung S3C64XX"
 	select ARCH_HAS_CPUFREQ
 	select ARCH_REQUIRE_GPIOLIB
+	select ARM_AMBA
 	select ARM_VIC
 	select CLKDEV_LOOKUP
 	select CLKSRC_SAMSUNG_PWM

arch/arm/mach-s3c64xx/Kconfig

@@ -17,9 +17,10 @@ config CPU_S3C6410
 	help
 	  Enable S3C6410 CPU support
 
-config S3C64XX_DMA
+config S3C64XX_PL080
-	bool "S3C64XX DMA"
+	bool "S3C64XX DMA using generic PL08x driver"
-	select S3C_DMA
+	select AMBA_PL08X
+	select SAMSUNG_DMADEV
 
 config S3C64XX_SETUP_SDHCI
 	bool

arch/arm/mach-s3c64xx/Makefile

@@ -26,7 +26,7 @@ obj-$(CONFIG_CPU_IDLE)		+= cpuidle.o
 
 # DMA support
 
-obj-$(CONFIG_S3C64XX_DMA)	+= dma.o
+obj-$(CONFIG_S3C64XX_PL080)	+= pl080.o
 
 # Device support
 

arch/arm/mach-s3c64xx/common.h

@@ -58,4 +58,9 @@ int __init s3c64xx_pm_late_initcall(void);
 static inline int s3c64xx_pm_late_initcall(void) { return 0; }
 #endif
 
+#ifdef CONFIG_S3C64XX_PL080
+extern struct pl08x_platform_data s3c64xx_dma0_plat_data;
+extern struct pl08x_platform_data s3c64xx_dma1_plat_data;
+#endif
+
 #endif /* __ARCH_ARM_MACH_S3C64XX_COMMON_H */

arch/arm/mach-s3c64xx/dma.c

@@ -1,762 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/dma.c
- *
- * Copyright 2009 Openmoko, Inc.
- * Copyright 2009 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C64XX DMA core
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/*
- * NOTE: Code in this file is not used when booting with Device Tree support.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/dmapool.h>
-#include <linux/device.h>
-#include <linux/errno.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/amba/pl080.h>
-#include <linux/of.h>
-
-#include <mach/dma.h>
-#include <mach/map.h>
-#include <mach/irqs.h>
-
-#include "regs-sys.h"
-
-/* dma channel state information */
-
-struct s3c64xx_dmac {
-	struct device		dev;
-	struct clk		*clk;
-	void __iomem		*regs;
-	struct s3c2410_dma_chan *channels;
-	enum dma_ch		 chanbase;
-};
-
-/* pool to provide LLI buffers */
-static struct dma_pool *dma_pool;
-
-/* Debug configuration and code */
-
-static unsigned char debug_show_buffs = 0;
-
-static void dbg_showchan(struct s3c2410_dma_chan *chan)
-{
-	pr_debug("DMA%d: %08x->%08x L %08x C %08x,%08x S %08x\n",
-		 chan->number,
-		 readl(chan->regs + PL080_CH_SRC_ADDR),
-		 readl(chan->regs + PL080_CH_DST_ADDR),
-		 readl(chan->regs + PL080_CH_LLI),
-		 readl(chan->regs + PL080_CH_CONTROL),
-		 readl(chan->regs + PL080S_CH_CONTROL2),
-		 readl(chan->regs + PL080S_CH_CONFIG));
-}
-
-static void show_lli(struct pl080s_lli *lli)
-{
-	pr_debug("LLI[%p] %08x->%08x, NL %08x C %08x,%08x\n",
-		 lli, lli->src_addr, lli->dst_addr, lli->next_lli,
-		 lli->control0, lli->control1);
-}
-
-static void dbg_showbuffs(struct s3c2410_dma_chan *chan)
-{
-	struct s3c64xx_dma_buff *ptr;
-	struct s3c64xx_dma_buff *end;
-
-	pr_debug("DMA%d: buffs next %p, curr %p, end %p\n",
-		 chan->number, chan->next, chan->curr, chan->end);
-
-	ptr = chan->next;
-	end = chan->end;
-
-	if (debug_show_buffs) {
-		for (; ptr != NULL; ptr = ptr->next) {
-			pr_debug("DMA%d: %08x ",
-				 chan->number, ptr->lli_dma);
-			show_lli(ptr->lli);
-		}
-	}
-}
-
-/* End of Debug */
-
-static struct s3c2410_dma_chan *s3c64xx_dma_map_channel(unsigned int channel)
-{
-	struct s3c2410_dma_chan *chan;
-	unsigned int start, offs;
-
-	start = 0;
-
-	if (channel >= DMACH_PCM1_TX)
-		start = 8;
-
-	for (offs = 0; offs < 8; offs++) {
-		chan = &s3c2410_chans[start + offs];
-		if (!chan->in_use)
-			goto found;
-	}
-
-	return NULL;
-
-found:
-	s3c_dma_chan_map[channel] = chan;
-	return chan;
-}
-
-int s3c2410_dma_config(enum dma_ch channel, int xferunit)
-{
-	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
-
-	if (chan == NULL)
-		return -EINVAL;
-
-	switch (xferunit) {
-	case 1:
-		chan->hw_width = 0;
-		break;
-	case 2:
-		chan->hw_width = 1;
-		break;
-	case 4:
-		chan->hw_width = 2;
-		break;
-	default:
-		printk(KERN_ERR "%s: illegal width %d\n", __func__, xferunit);
-		return -EINVAL;
-	}
-
-	return 0;
-}
-EXPORT_SYMBOL(s3c2410_dma_config);
-
-static void s3c64xx_dma_fill_lli(struct s3c2410_dma_chan *chan,
-				 struct pl080s_lli *lli,
-				 dma_addr_t data, int size)
-{
-	dma_addr_t src, dst;
-	u32 control0, control1;
-
-	switch (chan->source) {
-	case DMA_FROM_DEVICE:
-		src = chan->dev_addr;
-		dst = data;
-		control0 = PL080_CONTROL_SRC_AHB2;
-		control0 |= PL080_CONTROL_DST_INCR;
-		break;
-
-	case DMA_TO_DEVICE:
-		src = data;
-		dst = chan->dev_addr;
-		control0 = PL080_CONTROL_DST_AHB2;
-		control0 |= PL080_CONTROL_SRC_INCR;
-		break;
-	default:
-		BUG();
-	}
-
-	/* note, we do not currently setup any of the burst controls */
-
-	control1 = size >> chan->hw_width;	/* size in no of xfers */
-	control0 |= PL080_CONTROL_PROT_SYS;	/* always in priv. mode */
-	control0 |= PL080_CONTROL_TC_IRQ_EN;	/* always fire IRQ */
-	control0 |= (u32)chan->hw_width << PL080_CONTROL_DWIDTH_SHIFT;
-	control0 |= (u32)chan->hw_width << PL080_CONTROL_SWIDTH_SHIFT;
-
-	lli->src_addr = src;
-	lli->dst_addr = dst;
-	lli->next_lli = 0;
-	lli->control0 = control0;
-	lli->control1 = control1;
-}
-
-static void s3c64xx_lli_to_regs(struct s3c2410_dma_chan *chan,
-				struct pl080s_lli *lli)
-{
-	void __iomem *regs = chan->regs;
-
-	pr_debug("%s: LLI %p => regs\n", __func__, lli);
-	show_lli(lli);
-
-	writel(lli->src_addr, regs + PL080_CH_SRC_ADDR);
-	writel(lli->dst_addr, regs + PL080_CH_DST_ADDR);
-	writel(lli->next_lli, regs + PL080_CH_LLI);
-	writel(lli->control0, regs + PL080_CH_CONTROL);
-	writel(lli->control1, regs + PL080S_CH_CONTROL2);
-}
-
-static int s3c64xx_dma_start(struct s3c2410_dma_chan *chan)
-{
-	struct s3c64xx_dmac *dmac = chan->dmac;
-	u32 config;
-	u32 bit = chan->bit;
-
-	dbg_showchan(chan);
-
-	pr_debug("%s: clearing interrupts\n", __func__);
-
-	/* clear interrupts */
-	writel(bit, dmac->regs + PL080_TC_CLEAR);
-	writel(bit, dmac->regs + PL080_ERR_CLEAR);
-
-	pr_debug("%s: starting channel\n", __func__);
-
-	config = readl(chan->regs + PL080S_CH_CONFIG);
-	config |= PL080_CONFIG_ENABLE;
-	config &= ~PL080_CONFIG_HALT;
-
-	pr_debug("%s: writing config %08x\n", __func__, config);
-	writel(config, chan->regs + PL080S_CH_CONFIG);
-
-	return 0;
-}
-
-static int s3c64xx_dma_stop(struct s3c2410_dma_chan *chan)
-{
-	u32 config;
-	int timeout;
-
-	pr_debug("%s: stopping channel\n", __func__);
-
-	dbg_showchan(chan);
-
-	config = readl(chan->regs + PL080S_CH_CONFIG);
-	config |= PL080_CONFIG_HALT;
-	writel(config, chan->regs + PL080S_CH_CONFIG);
-
-	timeout = 1000;
-	do {
-		config = readl(chan->regs + PL080S_CH_CONFIG);
-		pr_debug("%s: %d - config %08x\n", __func__, timeout, config);
-		if (config & PL080_CONFIG_ACTIVE)
-			udelay(10);
-		else
-			break;
-		} while (--timeout > 0);
-
-	if (config & PL080_CONFIG_ACTIVE) {
-		printk(KERN_ERR "%s: channel still active\n", __func__);
-		return -EFAULT;
-	}
-
-	config = readl(chan->regs + PL080S_CH_CONFIG);
-	config &= ~PL080_CONFIG_ENABLE;
-	writel(config, chan->regs + PL080S_CH_CONFIG);
-
-	return 0;
-}
-
-static inline void s3c64xx_dma_bufffdone(struct s3c2410_dma_chan *chan,
-					 struct s3c64xx_dma_buff *buf,
-					 enum s3c2410_dma_buffresult result)
-{
-	if (chan->callback_fn != NULL)
-		(chan->callback_fn)(chan, buf->pw, 0, result);
-}
-
-static void s3c64xx_dma_freebuff(struct s3c64xx_dma_buff *buff)
-{
-	dma_pool_free(dma_pool, buff->lli, buff->lli_dma);
-	kfree(buff);
-}
-
-static int s3c64xx_dma_flush(struct s3c2410_dma_chan *chan)
-{
-	struct s3c64xx_dma_buff *buff, *next;
-	u32 config;
-
-	dbg_showchan(chan);
-
-	pr_debug("%s: flushing channel\n", __func__);
-
-	config = readl(chan->regs + PL080S_CH_CONFIG);
-	config &= ~PL080_CONFIG_ENABLE;
-	writel(config, chan->regs + PL080S_CH_CONFIG);
-
-	/* dump all the buffers associated with this channel */
-
-	for (buff = chan->curr; buff != NULL; buff = next) {
-		next = buff->next;
-		pr_debug("%s: buff %p (next %p)\n", __func__, buff, buff->next);
-
-		s3c64xx_dma_bufffdone(chan, buff, S3C2410_RES_ABORT);
-		s3c64xx_dma_freebuff(buff);
-	}
-
-	chan->curr = chan->next = chan->end = NULL;
-
-	return 0;
-}
-
-int s3c2410_dma_ctrl(enum dma_ch channel, enum s3c2410_chan_op op)
-{
-	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
-
-	WARN_ON(!chan);
-	if (!chan)
-		return -EINVAL;
-
-	switch (op) {
-	case S3C2410_DMAOP_START:
-		return s3c64xx_dma_start(chan);
-
-	case S3C2410_DMAOP_STOP:
-		return s3c64xx_dma_stop(chan);
-
-	case S3C2410_DMAOP_FLUSH:
-		return s3c64xx_dma_flush(chan);
-
-	/* believe PAUSE/RESUME are no-ops */
-	case S3C2410_DMAOP_PAUSE:
-	case S3C2410_DMAOP_RESUME:
-	case S3C2410_DMAOP_STARTED:
-	case S3C2410_DMAOP_TIMEOUT:
-		return 0;
-	}
-
-	return -ENOENT;
-}
-EXPORT_SYMBOL(s3c2410_dma_ctrl);
-
-/* s3c2410_dma_enque
- *
- */
-
-int s3c2410_dma_enqueue(enum dma_ch channel, void *id,
-			dma_addr_t data, int size)
-{
-	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
-	struct s3c64xx_dma_buff *next;
-	struct s3c64xx_dma_buff *buff;
-	struct pl080s_lli *lli;
-	unsigned long flags;
-	int ret;
-
-	WARN_ON(!chan);
-	if (!chan)
-		return -EINVAL;
-
-	buff = kzalloc(sizeof(struct s3c64xx_dma_buff), GFP_ATOMIC);
-	if (!buff) {
-		printk(KERN_ERR "%s: no memory for buffer\n", __func__);
-		return -ENOMEM;
-	}
-
-	lli = dma_pool_alloc(dma_pool, GFP_ATOMIC, &buff->lli_dma);
-	if (!lli) {
-		printk(KERN_ERR "%s: no memory for lli\n", __func__);
-		ret = -ENOMEM;
-		goto err_buff;
-	}
-
-	pr_debug("%s: buff %p, dp %08x lli (%p, %08x) %d\n",
-		 __func__, buff, data, lli, (u32)buff->lli_dma, size);
-
-	buff->lli = lli;
-	buff->pw = id;
-
-	s3c64xx_dma_fill_lli(chan, lli, data, size);
-
-	local_irq_save(flags);
-
-	if ((next = chan->next) != NULL) {
-		struct s3c64xx_dma_buff *end = chan->end;
-		struct pl080s_lli *endlli = end->lli;
-
-		pr_debug("enquing onto channel\n");
-
-		end->next = buff;
-		endlli->next_lli = buff->lli_dma;
-
-		if (chan->flags & S3C2410_DMAF_CIRCULAR) {
-			struct s3c64xx_dma_buff *curr = chan->curr;
-			lli->next_lli = curr->lli_dma;
-		}
-
-		if (next == chan->curr) {
-			writel(buff->lli_dma, chan->regs + PL080_CH_LLI);
-			chan->next = buff;
-		}
-
-		show_lli(endlli);
-		chan->end = buff;
-	} else {
-		pr_debug("enquing onto empty channel\n");
-
-		chan->curr = buff;
-		chan->next = buff;
-		chan->end = buff;
-
-		s3c64xx_lli_to_regs(chan, lli);
-	}
-
-	local_irq_restore(flags);
-
-	show_lli(lli);
-
-	dbg_showchan(chan);
-	dbg_showbuffs(chan);
-	return 0;
-
-err_buff:
-	kfree(buff);
-	return ret;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_enqueue);
-
-
-int s3c2410_dma_devconfig(enum dma_ch channel,
-			  enum dma_data_direction source,
-			  unsigned long devaddr)
-{
-	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
-	u32 peripheral;
-	u32 config = 0;
-
-	pr_debug("%s: channel %d, source %d, dev %08lx, chan %p\n",
-		 __func__, channel, source, devaddr, chan);
-
-	WARN_ON(!chan);
-	if (!chan)
-		return -EINVAL;
-
-	peripheral = (chan->peripheral & 0xf);
-	chan->source = source;
-	chan->dev_addr = devaddr;
-
-	pr_debug("%s: peripheral %d\n", __func__, peripheral);
-
-	switch (source) {
-	case DMA_FROM_DEVICE:
-		config = 2 << PL080_CONFIG_FLOW_CONTROL_SHIFT;
-		config |= peripheral << PL080_CONFIG_SRC_SEL_SHIFT;
-		break;
-	case DMA_TO_DEVICE:
-		config = 1 << PL080_CONFIG_FLOW_CONTROL_SHIFT;
-		config |= peripheral << PL080_CONFIG_DST_SEL_SHIFT;
-		break;
-	default:
-		printk(KERN_ERR "%s: bad source\n", __func__);
-		return -EINVAL;
-	}
-
-	/* allow TC and ERR interrupts */
-	config |= PL080_CONFIG_TC_IRQ_MASK;
-	config |= PL080_CONFIG_ERR_IRQ_MASK;
-
-	pr_debug("%s: config %08x\n", __func__, config);
-
-	writel(config, chan->regs + PL080S_CH_CONFIG);
-
-	return 0;
-}
-EXPORT_SYMBOL(s3c2410_dma_devconfig);
-
-
-int s3c2410_dma_getposition(enum dma_ch channel,
-			    dma_addr_t *src, dma_addr_t *dst)
-{
-	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
-
-	WARN_ON(!chan);
-	if (!chan)
-		return -EINVAL;
-
-	if (src != NULL)
-		*src = readl(chan->regs + PL080_CH_SRC_ADDR);
-
-	if (dst != NULL)
-		*dst = readl(chan->regs + PL080_CH_DST_ADDR);
-
-	return 0;
-}
-EXPORT_SYMBOL(s3c2410_dma_getposition);
-
-/* s3c2410_request_dma
- *
- * get control of an dma channel
-*/
-
-int s3c2410_dma_request(enum dma_ch channel,
-			struct s3c2410_dma_client *client,
-			void *dev)
-{
-	struct s3c2410_dma_chan *chan;
-	unsigned long flags;
-
-	pr_debug("dma%d: s3c2410_request_dma: client=%s, dev=%p\n",
-		 channel, client->name, dev);
-
-	local_irq_save(flags);
-
-	chan = s3c64xx_dma_map_channel(channel);
-	if (chan == NULL) {
-		local_irq_restore(flags);
-		return -EBUSY;
-	}
-
-	dbg_showchan(chan);
-
-	chan->client = client;
-	chan->in_use = 1;
-	chan->peripheral = channel;
-	chan->flags = 0;
-
-	local_irq_restore(flags);
-
-	/* need to setup */
-
-	pr_debug("%s: channel initialised, %p\n", __func__, chan);
-
-	return chan->number | DMACH_LOW_LEVEL;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_request);
-
-/* s3c2410_dma_free
- *
- * release the given channel back to the system, will stop and flush
- * any outstanding transfers, and ensure the channel is ready for the
- * next claimant.
- *
- * Note, although a warning is currently printed if the freeing client
- * info is not the same as the registrant's client info, the free is still
- * allowed to go through.
-*/
-
-int s3c2410_dma_free(enum dma_ch channel, struct s3c2410_dma_client *client)
-{
-	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
-	unsigned long flags;
-
-	if (chan == NULL)
-		return -EINVAL;
-
-	local_irq_save(flags);
-
-	if (chan->client != client) {
-		printk(KERN_WARNING "dma%d: possible free from different client (channel %p, passed %p)\n",
-		       channel, chan->client, client);
-	}
-
-	/* sort out stopping and freeing the channel */
-
-
-	chan->client = NULL;
-	chan->in_use = 0;
-
-	if (!(channel & DMACH_LOW_LEVEL))
-		s3c_dma_chan_map[channel] = NULL;
-
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_free);
-
-static irqreturn_t s3c64xx_dma_irq(int irq, void *pw)
-{
-	struct s3c64xx_dmac *dmac = pw;
-	struct s3c2410_dma_chan *chan;
-	enum s3c2410_dma_buffresult res;
-	u32 tcstat, errstat;
-	u32 bit;
-	int offs;
-
-	tcstat = readl(dmac->regs + PL080_TC_STATUS);
-	errstat = readl(dmac->regs + PL080_ERR_STATUS);
-
-	for (offs = 0, bit = 1; offs < 8; offs++, bit <<= 1) {
-		struct s3c64xx_dma_buff *buff;
-
-		if (!(errstat & bit) && !(tcstat & bit))
-			continue;
-
-		chan = dmac->channels + offs;
-		res = S3C2410_RES_ERR;
-
-		if (tcstat & bit) {
-			writel(bit, dmac->regs + PL080_TC_CLEAR);
-			res = S3C2410_RES_OK;
-		}
-
-		if (errstat & bit)
-			writel(bit, dmac->regs + PL080_ERR_CLEAR);
-
-		/* 'next' points to the buffer that is next to the
-		 * currently active buffer.
-		 * For CIRCULAR queues, 'next' will be same as 'curr'
-		 * when 'end' is the active buffer.
-		 */
-		buff = chan->curr;
-		while (buff && buff != chan->next
-				&& buff->next != chan->next)
-			buff = buff->next;
-
-		if (!buff)
-			BUG();
-
-		if (buff == chan->next)
-			buff = chan->end;
-
-		s3c64xx_dma_bufffdone(chan, buff, res);
-
-		/* Free the node and update curr, if non-circular queue */
-		if (!(chan->flags & S3C2410_DMAF_CIRCULAR)) {
-			chan->curr = buff->next;
-			s3c64xx_dma_freebuff(buff);
-		}
-
-		/* Update 'next' */
-		buff = chan->next;
-		if (chan->next == chan->end) {
-			chan->next = chan->curr;
-			if (!(chan->flags & S3C2410_DMAF_CIRCULAR))
-				chan->end = NULL;
-		} else {
-			chan->next = buff->next;
-		}
-	}
-
-	return IRQ_HANDLED;
-}
-
-static struct bus_type dma_subsys = {
-	.name		= "s3c64xx-dma",
-	.dev_name	= "s3c64xx-dma",
-};
-
-static int s3c64xx_dma_init1(int chno, enum dma_ch chbase,
-			     int irq, unsigned int base)
-{
-	struct s3c2410_dma_chan *chptr = &s3c2410_chans[chno];
-	struct s3c64xx_dmac *dmac;
-	char clkname[16];
-	void __iomem *regs;
-	void __iomem *regptr;
-	int err, ch;
-
-	dmac = kzalloc(sizeof(struct s3c64xx_dmac), GFP_KERNEL);
-	if (!dmac) {
-		printk(KERN_ERR "%s: failed to alloc mem\n", __func__);
-		return -ENOMEM;
-	}
-
-	dmac->dev.id = chno / 8;
-	dmac->dev.bus = &dma_subsys;
-
-	err = device_register(&dmac->dev);
-	if (err) {
-		printk(KERN_ERR "%s: failed to register device\n", __func__);
-		goto err_alloc;
-	}
-
-	regs = ioremap(base, 0x200);
-	if (!regs) {
-		printk(KERN_ERR "%s: failed to ioremap()\n", __func__);
-		err = -ENXIO;
-		goto err_dev;
-	}
-
-	snprintf(clkname, sizeof(clkname), "dma%d", dmac->dev.id);
-
-	dmac->clk = clk_get(NULL, clkname);
-	if (IS_ERR(dmac->clk)) {
-		printk(KERN_ERR "%s: failed to get clock %s\n", __func__, clkname);
-		err = PTR_ERR(dmac->clk);
-		goto err_map;
-	}
-
-	clk_prepare_enable(dmac->clk);
-
-	dmac->regs = regs;
-	dmac->chanbase = chbase;
-	dmac->channels = chptr;
-
-	err = request_irq(irq, s3c64xx_dma_irq, 0, "DMA", dmac);
-	if (err < 0) {
-		printk(KERN_ERR "%s: failed to get irq\n", __func__);
-		goto err_clk;
-	}
-
-	regptr = regs + PL080_Cx_BASE(0);
-
-	for (ch = 0; ch < 8; ch++, chptr++) {
-		pr_debug("%s: registering DMA %d (%p)\n",
-			 __func__, chno + ch, regptr);
-
-		chptr->bit = 1 << ch;
-		chptr->number = chno + ch;
-		chptr->dmac = dmac;
-		chptr->regs = regptr;
-		regptr += PL080_Cx_STRIDE;
-	}
-
-	/* for the moment, permanently enable the controller */
-	writel(PL080_CONFIG_ENABLE, regs + PL080_CONFIG);
-
-	printk(KERN_INFO "PL080: IRQ %d, at %p, channels %d..%d\n",
-	       irq, regs, chno, chno+8);
-
-	return 0;
-
-err_clk:
-	clk_disable_unprepare(dmac->clk);
-	clk_put(dmac->clk);
-err_map:
-	iounmap(regs);
-err_dev:
-	device_unregister(&dmac->dev);
-err_alloc:
-	kfree(dmac);
-	return err;
-}
-
-static int __init s3c64xx_dma_init(void)
-{
-	int ret;
-
-	/* This driver is not supported when booting with device tree. */
-	if (of_have_populated_dt())
-		return -ENODEV;
-
-	printk(KERN_INFO "%s: Registering DMA channels\n", __func__);
-
-	dma_pool = dma_pool_create("DMA-LLI", NULL, sizeof(struct pl080s_lli), 16, 0);
-	if (!dma_pool) {
-		printk(KERN_ERR "%s: failed to create pool\n", __func__);
-		return -ENOMEM;
-	}
-
-	ret = subsys_system_register(&dma_subsys, NULL);
-	if (ret) {
-		printk(KERN_ERR "%s: failed to create subsys\n", __func__);
-		return -ENOMEM;
-	}
-
-	/* Set all DMA configuration to be DMA, not SDMA */
-	writel(0xffffff, S3C64XX_SDMA_SEL);
-
-	/* Register standard DMA controllers */
-	s3c64xx_dma_init1(0, DMACH_UART0, IRQ_DMA0, 0x75000000);
-	s3c64xx_dma_init1(8, DMACH_PCM1_TX, IRQ_DMA1, 0x75100000);
-
-	return 0;
-}
-
-arch_initcall(s3c64xx_dma_init);

arch/arm/mach-s3c64xx/include/mach/dma.h

@@ -11,51 +11,48 @@
 #ifndef __ASM_ARCH_DMA_H
 #define __ASM_ARCH_DMA_H __FILE__
 
-#define S3C_DMA_CHANNELS	(16)
+#define S3C64XX_DMA_CHAN(name)		((unsigned long)(name))
 
-/* see mach-s3c2410/dma.h for notes on dma channel numbers */
+/* DMA0/SDMA0 */
+#define DMACH_UART0		S3C64XX_DMA_CHAN("uart0_tx")
+#define DMACH_UART0_SRC2	S3C64XX_DMA_CHAN("uart0_rx")
+#define DMACH_UART1		S3C64XX_DMA_CHAN("uart1_tx")
+#define DMACH_UART1_SRC2	S3C64XX_DMA_CHAN("uart1_rx")
+#define DMACH_UART2		S3C64XX_DMA_CHAN("uart2_tx")
+#define DMACH_UART2_SRC2	S3C64XX_DMA_CHAN("uart2_rx")
+#define DMACH_UART3		S3C64XX_DMA_CHAN("uart3_tx")
+#define DMACH_UART3_SRC2	S3C64XX_DMA_CHAN("uart3_rx")
+#define DMACH_PCM0_TX		S3C64XX_DMA_CHAN("pcm0_tx")
+#define DMACH_PCM0_RX		S3C64XX_DMA_CHAN("pcm0_rx")
+#define DMACH_I2S0_OUT		S3C64XX_DMA_CHAN("i2s0_tx")
+#define DMACH_I2S0_IN		S3C64XX_DMA_CHAN("i2s0_rx")
+#define DMACH_SPI0_TX		S3C64XX_DMA_CHAN("spi0_tx")
+#define DMACH_SPI0_RX		S3C64XX_DMA_CHAN("spi0_rx")
+#define DMACH_HSI_I2SV40_TX	S3C64XX_DMA_CHAN("i2s2_tx")
+#define DMACH_HSI_I2SV40_RX	S3C64XX_DMA_CHAN("i2s2_rx")
+
+/* DMA1/SDMA1 */
+#define DMACH_PCM1_TX		S3C64XX_DMA_CHAN("pcm1_tx")
+#define DMACH_PCM1_RX		S3C64XX_DMA_CHAN("pcm1_rx")
+#define DMACH_I2S1_OUT		S3C64XX_DMA_CHAN("i2s1_tx")
+#define DMACH_I2S1_IN		S3C64XX_DMA_CHAN("i2s1_rx")
+#define DMACH_SPI1_TX		S3C64XX_DMA_CHAN("spi1_tx")
+#define DMACH_SPI1_RX		S3C64XX_DMA_CHAN("spi1_rx")
+#define DMACH_AC97_PCMOUT	S3C64XX_DMA_CHAN("ac97_out")
+#define DMACH_AC97_PCMIN	S3C64XX_DMA_CHAN("ac97_in")
+#define DMACH_AC97_MICIN	S3C64XX_DMA_CHAN("ac97_mic")
+#define DMACH_PWM		S3C64XX_DMA_CHAN("pwm")
+#define DMACH_IRDA		S3C64XX_DMA_CHAN("irda")
+#define DMACH_EXTERNAL		S3C64XX_DMA_CHAN("external")
+#define DMACH_SECURITY_RX	S3C64XX_DMA_CHAN("sec_rx")
+#define DMACH_SECURITY_TX	S3C64XX_DMA_CHAN("sec_tx")
 
-/* Note, for the S3C64XX architecture we keep the DMACH_
- * defines in the order they are allocated to [S]DMA0/[S]DMA1
- * so that is easy to do DHACH_ -> DMA controller conversion
- */
 enum dma_ch {
-	/* DMA0/SDMA0 */
+	DMACH_MAX = 32
-	DMACH_UART0 = 0,
+};
-	DMACH_UART0_SRC2,
-	DMACH_UART1,
-	DMACH_UART1_SRC2,
-	DMACH_UART2,
-	DMACH_UART2_SRC2,
-	DMACH_UART3,
-	DMACH_UART3_SRC2,
-	DMACH_PCM0_TX,
-	DMACH_PCM0_RX,
-	DMACH_I2S0_OUT,
-	DMACH_I2S0_IN,
-	DMACH_SPI0_TX,
-	DMACH_SPI0_RX,
-	DMACH_HSI_I2SV40_TX,
-	DMACH_HSI_I2SV40_RX,
 
-	/* DMA1/SDMA1 */
+struct s3c2410_dma_client {
-	DMACH_PCM1_TX = 16,
+	char	*name;
-	DMACH_PCM1_RX,
-	DMACH_I2S1_OUT,
-	DMACH_I2S1_IN,
-	DMACH_SPI1_TX,
-	DMACH_SPI1_RX,
-	DMACH_AC97_PCMOUT,
-	DMACH_AC97_PCMIN,
-	DMACH_AC97_MICIN,
-	DMACH_PWM,
-	DMACH_IRDA,
-	DMACH_EXTERNAL,
-	DMACH_RES1,
-	DMACH_RES2,
-	DMACH_SECURITY_RX,	/* SDMA1 only */
-	DMACH_SECURITY_TX,	/* SDMA1 only */
-	DMACH_MAX		/* the end */
 };
 
 static inline bool samsung_dma_has_circular(void)
@@ -65,67 +62,10 @@ static inline bool samsung_dma_has_circular(void)
 
 static inline bool samsung_dma_is_dmadev(void)
 {
-	return false;
+	return true;
 }
-#define S3C2410_DMAF_CIRCULAR		(1 << 0)
 
-#include <plat/dma.h>
+#include <linux/amba/pl08x.h>
-
+#include <plat/dma-ops.h>
-#define DMACH_LOW_LEVEL (1<<28) /* use this to specifiy hardware ch no */
-
-struct s3c64xx_dma_buff;
-
-/** s3c64xx_dma_buff - S3C64XX DMA buffer descriptor
- * @next: Pointer to next buffer in queue or ring.
- * @pw: Client provided identifier
- * @lli: Pointer to hardware descriptor this buffer is associated with.
- * @lli_dma: Hardare address of the descriptor.
- */
-struct s3c64xx_dma_buff {
-	struct s3c64xx_dma_buff *next;
-
-	void			*pw;
-	struct pl080s_lli	*lli;
-	dma_addr_t		 lli_dma;
-};
-
-struct s3c64xx_dmac;
-
-struct s3c2410_dma_chan {
-	unsigned char		 number;      /* number of this dma channel */
-	unsigned char		 in_use;      /* channel allocated */
-	unsigned char		 bit;	      /* bit for enable/disable/etc */
-	unsigned char		 hw_width;
-	unsigned char		 peripheral;
-
-	unsigned int		 flags;
-	enum dma_data_direction	 source;
-
-
-	dma_addr_t		dev_addr;
-
-	struct s3c2410_dma_client *client;
-	struct s3c64xx_dmac	*dmac;		/* pointer to controller */
-
-	void __iomem		*regs;
-
-	/* cdriver callbacks */
-	s3c2410_dma_cbfn_t	 callback_fn;	/* buffer done callback */
-	s3c2410_dma_opfn_t	 op_fn;		/* channel op callback */
-
-	/* buffer list and information */
-	struct s3c64xx_dma_buff	*curr;		/* current dma buffer */
-	struct s3c64xx_dma_buff	*next;		/* next buffer to load */
-	struct s3c64xx_dma_buff	*end;		/* end of queue */
-
-	/* note, when channel is running in circular mode, curr is the
-	 * first buffer enqueued, end is the last and curr is where the
-	 * last buffer-done event is set-at. The buffers are not freed
-	 * and the last buffer hardware descriptor points back to the
-	 * first.
-	 */
-};
-
-#include <plat/dma-core.h>
 
 #endif /* __ASM_ARCH_IRQ_H */

arch/arm/mach-s3c64xx/pl080.c

@@ -0,0 +1,244 @@
+/*
+ * Samsung's S3C64XX generic DMA support using amba-pl08x driver.
+ *
+ * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/pl080.h>
+#include <linux/amba/pl08x.h>
+#include <linux/of.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#include "regs-sys.h"
+
+static int pl08x_get_xfer_signal(const struct pl08x_channel_data *cd)
+{
+	return cd->min_signal;
+}
+
+static void pl08x_put_xfer_signal(const struct pl08x_channel_data *cd, int ch)
+{
+}
+
+/*
+ * DMA0
+ */
+
+static struct pl08x_channel_data s3c64xx_dma0_info[] = {
+	{
+		.bus_id = "uart0_tx",
+		.min_signal = 0,
+		.max_signal = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "uart0_rx",
+		.min_signal = 1,
+		.max_signal = 1,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "uart1_tx",
+		.min_signal = 2,
+		.max_signal = 2,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "uart1_rx",
+		.min_signal = 3,
+		.max_signal = 3,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "uart2_tx",
+		.min_signal = 4,
+		.max_signal = 4,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "uart2_rx",
+		.min_signal = 5,
+		.max_signal = 5,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "uart3_tx",
+		.min_signal = 6,
+		.max_signal = 6,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "uart3_rx",
+		.min_signal = 7,
+		.max_signal = 7,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "pcm0_tx",
+		.min_signal = 8,
+		.max_signal = 8,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "pcm0_rx",
+		.min_signal = 9,
+		.max_signal = 9,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "i2s0_tx",
+		.min_signal = 10,
+		.max_signal = 10,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "i2s0_rx",
+		.min_signal = 11,
+		.max_signal = 11,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "spi0_tx",
+		.min_signal = 12,
+		.max_signal = 12,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "spi0_rx",
+		.min_signal = 13,
+		.max_signal = 13,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "i2s2_tx",
+		.min_signal = 14,
+		.max_signal = 14,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "i2s2_rx",
+		.min_signal = 15,
+		.max_signal = 15,
+		.periph_buses = PL08X_AHB2,
+	}
+};
+
+struct pl08x_platform_data s3c64xx_dma0_plat_data = {
+	.memcpy_channel = {
+		.bus_id = "memcpy",
+		.cctl_memcpy =
+			(PL080_BSIZE_4 << PL080_CONTROL_SB_SIZE_SHIFT |
+			PL080_BSIZE_4 << PL080_CONTROL_DB_SIZE_SHIFT |
+			PL080_WIDTH_32BIT << PL080_CONTROL_SWIDTH_SHIFT |
+			PL080_WIDTH_32BIT << PL080_CONTROL_DWIDTH_SHIFT |
+			PL080_CONTROL_PROT_BUFF | PL080_CONTROL_PROT_CACHE |
+			PL080_CONTROL_PROT_SYS),
+	},
+	.lli_buses = PL08X_AHB1,
+	.mem_buses = PL08X_AHB1,
+	.get_xfer_signal = pl08x_get_xfer_signal,
+	.put_xfer_signal = pl08x_put_xfer_signal,
+	.slave_channels = s3c64xx_dma0_info,
+	.num_slave_channels = ARRAY_SIZE(s3c64xx_dma0_info),
+};
+
+static AMBA_AHB_DEVICE(s3c64xx_dma0, "dma-pl080s.0", 0,
+			0x75000000, {IRQ_DMA0}, &s3c64xx_dma0_plat_data);
+
+/*
+ * DMA1
+ */
+
+static struct pl08x_channel_data s3c64xx_dma1_info[] = {
+	{
+		.bus_id = "pcm1_tx",
+		.min_signal = 0,
+		.max_signal = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "pcm1_rx",
+		.min_signal = 1,
+		.max_signal = 1,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "i2s1_tx",
+		.min_signal = 2,
+		.max_signal = 2,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "i2s1_rx",
+		.min_signal = 3,
+		.max_signal = 3,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "spi1_tx",
+		.min_signal = 4,
+		.max_signal = 4,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "spi1_rx",
+		.min_signal = 5,
+		.max_signal = 5,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ac97_out",
+		.min_signal = 6,
+		.max_signal = 6,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ac97_in",
+		.min_signal = 7,
+		.max_signal = 7,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ac97_mic",
+		.min_signal = 8,
+		.max_signal = 8,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "pwm",
+		.min_signal = 9,
+		.max_signal = 9,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "irda",
+		.min_signal = 10,
+		.max_signal = 10,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "external",
+		.min_signal = 11,
+		.max_signal = 11,
+		.periph_buses = PL08X_AHB2,
+	},
+};
+
+struct pl08x_platform_data s3c64xx_dma1_plat_data = {
+	.memcpy_channel = {
+		.bus_id = "memcpy",
+		.cctl_memcpy =
+			(PL080_BSIZE_4 << PL080_CONTROL_SB_SIZE_SHIFT |
+			PL080_BSIZE_4 << PL080_CONTROL_DB_SIZE_SHIFT |
+			PL080_WIDTH_32BIT << PL080_CONTROL_SWIDTH_SHIFT |
+			PL080_WIDTH_32BIT << PL080_CONTROL_DWIDTH_SHIFT |
+			PL080_CONTROL_PROT_BUFF | PL080_CONTROL_PROT_CACHE |
+			PL080_CONTROL_PROT_SYS),
+	},
+	.lli_buses = PL08X_AHB1,
+	.mem_buses = PL08X_AHB1,
+	.get_xfer_signal = pl08x_get_xfer_signal,
+	.put_xfer_signal = pl08x_put_xfer_signal,
+	.slave_channels = s3c64xx_dma1_info,
+	.num_slave_channels = ARRAY_SIZE(s3c64xx_dma1_info),
+};
+
+static AMBA_AHB_DEVICE(s3c64xx_dma1, "dma-pl080s.1", 0,
+			0x75100000, {IRQ_DMA1}, &s3c64xx_dma1_plat_data);
+
+static int __init s3c64xx_pl080_init(void)
+{
+	/* Set all DMA configuration to be DMA, not SDMA */
+	writel(0xffffff, S3C64XX_SDMA_SEL);
+
+	if (of_have_populated_dt())
+		return 0;
+
+	amba_device_register(&s3c64xx_dma0_device, &iomem_resource);
+	amba_device_register(&s3c64xx_dma1_device, &iomem_resource);
+
+	return 0;
+}
+arch_initcall(s3c64xx_pl080_init);

arch/arm/mach-ux500/board-mop500-audio.c

@@ -31,7 +31,7 @@ static struct stedma40_chan_cfg msp0_dma_tx = {
 };
 
 struct msp_i2s_platform_data msp0_platform_data = {
-	.id = MSP_I2S_0,
+	.id = 0,
 	.msp_i2s_dma_rx = &msp0_dma_rx,
 	.msp_i2s_dma_tx = &msp0_dma_tx,
 };
@@ -49,7 +49,7 @@ static struct stedma40_chan_cfg msp1_dma_tx = {
 };
 
 struct msp_i2s_platform_data msp1_platform_data = {
-	.id = MSP_I2S_1,
+	.id = 1,
 	.msp_i2s_dma_rx = NULL,
 	.msp_i2s_dma_tx = &msp1_dma_tx,
 };
@@ -69,13 +69,13 @@ static struct stedma40_chan_cfg msp2_dma_tx = {
 };
 
 struct msp_i2s_platform_data msp2_platform_data = {
-	.id = MSP_I2S_2,
+	.id = 2,
 	.msp_i2s_dma_rx = &msp2_dma_rx,
 	.msp_i2s_dma_tx = &msp2_dma_tx,
 };
 
 struct msp_i2s_platform_data msp3_platform_data = {
-	.id		= MSP_I2S_3,
+	.id		= 3,
 	.msp_i2s_dma_rx	= &msp1_dma_rx,
 	.msp_i2s_dma_tx	= NULL,
 };

arch/arm/plat-samsung/devs.c

@@ -1468,6 +1468,8 @@ void __init s3c64xx_spi0_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
 	pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi0_cfg_gpio;
 #if defined(CONFIG_PL330_DMA)
 	pd.filter = pl330_filter;
+#elif defined(CONFIG_S3C64XX_PL080)
+	pd.filter = pl08x_filter_id;
 #elif defined(CONFIG_S3C24XX_DMAC)
 	pd.filter = s3c24xx_dma_filter;
 #endif
@@ -1509,8 +1511,10 @@ void __init s3c64xx_spi1_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
 	pd.num_cs = num_cs;
 	pd.src_clk_nr = src_clk_nr;
 	pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi1_cfg_gpio;
-#ifdef CONFIG_PL330_DMA
+#if defined(CONFIG_PL330_DMA)
 	pd.filter = pl330_filter;
+#elif defined(CONFIG_S3C64XX_PL080)
+	pd.filter = pl08x_filter_id;
 #endif
 
 	s3c_set_platdata(&pd, sizeof(pd), &s3c64xx_device_spi1);
@@ -1550,8 +1554,10 @@ void __init s3c64xx_spi2_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
 	pd.num_cs = num_cs;
 	pd.src_clk_nr = src_clk_nr;
 	pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi2_cfg_gpio;
-#ifdef CONFIG_PL330_DMA
+#if defined(CONFIG_PL330_DMA)
 	pd.filter = pl330_filter;
+#elif defined(CONFIG_S3C64XX_PL080)
+	pd.filter = pl08x_filter_id;
 #endif
 
 	s3c_set_platdata(&pd, sizeof(pd), &s3c64xx_device_spi2);

arch/arm/plat-samsung/dma-ops.c

@@ -18,6 +18,12 @@
 
 #include <mach/dma.h>
 
+#if defined(CONFIG_PL330_DMA)
+#define dma_filter pl330_filter
+#elif defined(CONFIG_S3C64XX_PL080)
+#define dma_filter pl08x_filter_id
+#endif
+
 static unsigned samsung_dmadev_request(enum dma_ch dma_ch,
 				struct samsung_dma_req *param,
 				struct device *dev, char *ch_name)
@@ -30,7 +36,7 @@ static unsigned samsung_dmadev_request(enum dma_ch dma_ch,
 	if (dev->of_node)
 		return (unsigned)dma_request_slave_channel(dev, ch_name);
 	else
-		return (unsigned)dma_request_channel(mask, pl330_filter,
+		return (unsigned)dma_request_channel(mask, dma_filter,
 							(void *)dma_ch);
 }
 

drivers/clk/samsung/clk-s3c64xx.c

@@ -331,8 +331,8 @@ static struct samsung_clock_alias s3c64xx_clock_aliases[] = {
 	ALIAS(HCLK_HSMMC1, "s3c-sdhci.1", "mmc_busclk.0"),
 	ALIAS(HCLK_HSMMC0, "s3c-sdhci.0", "hsmmc"),
 	ALIAS(HCLK_HSMMC0, "s3c-sdhci.0", "mmc_busclk.0"),
-	ALIAS(HCLK_DMA1, NULL, "dma1"),
+	ALIAS(HCLK_DMA1, "dma-pl080s.1", "apb_pclk"),
-	ALIAS(HCLK_DMA0, NULL, "dma0"),
+	ALIAS(HCLK_DMA0, "dma-pl080s.0", "apb_pclk"),
 	ALIAS(HCLK_CAMIF, "s3c-camif", "camif"),
 	ALIAS(HCLK_LCD, "s3c-fb", "lcd"),
 	ALIAS(PCLK_SPI1, "s3c6410-spi.1", "spi"),

drivers/dma/dmaengine.c

@@ -540,6 +540,8 @@ EXPORT_SYMBOL_GPL(dma_get_slave_channel);
  * @mask: capabilities that the channel must satisfy
  * @fn: optional callback to disposition available channels
  * @fn_param: opaque parameter to pass to dma_filter_fn
+ *
+ * Returns pointer to appropriate DMA channel on success or NULL.
  */
 struct dma_chan *__dma_request_channel(const dma_cap_mask_t *mask,
 				       dma_filter_fn fn, void *fn_param)
@@ -591,18 +593,43 @@ EXPORT_SYMBOL_GPL(__dma_request_channel);
  * dma_request_slave_channel - try to allocate an exclusive slave channel
  * @dev:	pointer to client device structure
  * @name:	slave channel name
+ *
+ * Returns pointer to appropriate DMA channel on success or an error pointer.
  */
-struct dma_chan *dma_request_slave_channel(struct device *dev, const char *name)
+struct dma_chan *dma_request_slave_channel_reason(struct device *dev,
+						  const char *name)
 {
+	struct dma_chan *chan;
+
 	/* If device-tree is present get slave info from here */
 	if (dev->of_node)
 		return of_dma_request_slave_channel(dev->of_node, name);
 
 	/* If device was enumerated by ACPI get slave info from here */
-	if (ACPI_HANDLE(dev))
+	if (ACPI_HANDLE(dev)) {
-		return acpi_dma_request_slave_chan_by_name(dev, name);
+		chan = acpi_dma_request_slave_chan_by_name(dev, name);
+		if (chan)
+			return chan;
+	}
 
-	return NULL;
+	return ERR_PTR(-ENODEV);
+}
+EXPORT_SYMBOL_GPL(dma_request_slave_channel_reason);
+
+/**
+ * dma_request_slave_channel - try to allocate an exclusive slave channel
+ * @dev:	pointer to client device structure
+ * @name:	slave channel name
+ *
+ * Returns pointer to appropriate DMA channel on success or NULL.
+ */
+struct dma_chan *dma_request_slave_channel(struct device *dev,
+					   const char *name)
+{
+	struct dma_chan *ch = dma_request_slave_channel_reason(dev, name);
+	if (IS_ERR(ch))
+		return NULL;
+	return ch;
 }
 EXPORT_SYMBOL_GPL(dma_request_slave_channel);
 

drivers/dma/of-dma.c

@@ -143,7 +143,7 @@ static int of_dma_match_channel(struct device_node *np, const char *name,
  * @np:		device node to get DMA request from
  * @name:	name of desired channel
  *
- * Returns pointer to appropriate dma channel on success or NULL on error.
+ * Returns pointer to appropriate DMA channel on success or an error pointer.
  */
 struct dma_chan *of_dma_request_slave_channel(struct device_node *np,
 					      const char *name)
@@ -152,17 +152,18 @@ struct dma_chan *of_dma_request_slave_channel(struct device_node *np,
 	struct of_dma		*ofdma;
 	struct dma_chan		*chan;
 	int			count, i;
+	int			ret_no_channel = -ENODEV;
 
 	if (!np || !name) {
 		pr_err("%s: not enough information provided\n", __func__);
-		return NULL;
+		return ERR_PTR(-ENODEV);
 	}
 
 	count = of_property_count_strings(np, "dma-names");
 	if (count < 0) {
 		pr_err("%s: dma-names property of node '%s' missing or empty\n",
 			__func__, np->full_name);
-		return NULL;
+		return ERR_PTR(-ENODEV);
 	}
 
 	for (i = 0; i < count; i++) {
@@ -172,10 +173,12 @@ struct dma_chan *of_dma_request_slave_channel(struct device_node *np,
 		mutex_lock(&of_dma_lock);
 		ofdma = of_dma_find_controller(&dma_spec);
 
-		if (ofdma)
+		if (ofdma) {
 			chan = ofdma->of_dma_xlate(&dma_spec, ofdma);
-		else
+		} else {
+			ret_no_channel = -EPROBE_DEFER;
 			chan = NULL;
+		}
 
 		mutex_unlock(&of_dma_lock);
 
@@ -185,7 +188,7 @@ struct dma_chan *of_dma_request_slave_channel(struct device_node *np,
 			return chan;
 	}
 
-	return NULL;
+	return ERR_PTR(ret_no_channel);
 }
 
 /**

drivers/dma/pl330.c

@@ -2884,6 +2884,7 @@ static int pl330_dma_device_slave_caps(struct dma_chan *dchan,
 	caps->directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV);
 	caps->cmd_pause = false;
 	caps->cmd_terminate = true;
+	caps->residue_granularity = DMA_RESIDUE_GRANULARITY_DESCRIPTOR;
 
 	return 0;
 }

drivers/mfd/twl-core.c

@@ -47,6 +47,9 @@
 #include <linux/i2c.h>
 #include <linux/i2c/twl.h>
 
+/* Register descriptions for audio */
+#include <linux/mfd/twl4030-audio.h>
+
 #include "twl-core.h"
 
 /*
@@ -200,6 +203,105 @@ static struct twl_mapping twl4030_map[] = {
 	{ 2, TWL5031_BASEADD_INTERRUPTS },
 };
 
+static struct reg_default twl4030_49_defaults[] = {
+	/* Audio Registers */
+	{ 0x01, 0x00}, /* CODEC_MODE	*/
+	{ 0x02, 0x00}, /* OPTION	*/
+	/* 0x03  Unused	*/
+	{ 0x04, 0x00}, /* MICBIAS_CTL	*/
+	{ 0x05, 0x00}, /* ANAMICL	*/
+	{ 0x06, 0x00}, /* ANAMICR	*/
+	{ 0x07, 0x00}, /* AVADC_CTL	*/
+	{ 0x08, 0x00}, /* ADCMICSEL	*/
+	{ 0x09, 0x00}, /* DIGMIXING	*/
+	{ 0x0a, 0x0f}, /* ATXL1PGA	*/
+	{ 0x0b, 0x0f}, /* ATXR1PGA	*/
+	{ 0x0c, 0x0f}, /* AVTXL2PGA	*/
+	{ 0x0d, 0x0f}, /* AVTXR2PGA	*/
+	{ 0x0e, 0x00}, /* AUDIO_IF	*/
+	{ 0x0f, 0x00}, /* VOICE_IF	*/
+	{ 0x10, 0x3f}, /* ARXR1PGA	*/
+	{ 0x11, 0x3f}, /* ARXL1PGA	*/
+	{ 0x12, 0x3f}, /* ARXR2PGA	*/
+	{ 0x13, 0x3f}, /* ARXL2PGA	*/
+	{ 0x14, 0x25}, /* VRXPGA	*/
+	{ 0x15, 0x00}, /* VSTPGA	*/
+	{ 0x16, 0x00}, /* VRX2ARXPGA	*/
+	{ 0x17, 0x00}, /* AVDAC_CTL	*/
+	{ 0x18, 0x00}, /* ARX2VTXPGA	*/
+	{ 0x19, 0x32}, /* ARXL1_APGA_CTL*/
+	{ 0x1a, 0x32}, /* ARXR1_APGA_CTL*/
+	{ 0x1b, 0x32}, /* ARXL2_APGA_CTL*/
+	{ 0x1c, 0x32}, /* ARXR2_APGA_CTL*/
+	{ 0x1d, 0x00}, /* ATX2ARXPGA	*/
+	{ 0x1e, 0x00}, /* BT_IF		*/
+	{ 0x1f, 0x55}, /* BTPGA		*/
+	{ 0x20, 0x00}, /* BTSTPGA	*/
+	{ 0x21, 0x00}, /* EAR_CTL	*/
+	{ 0x22, 0x00}, /* HS_SEL	*/
+	{ 0x23, 0x00}, /* HS_GAIN_SET	*/
+	{ 0x24, 0x00}, /* HS_POPN_SET	*/
+	{ 0x25, 0x00}, /* PREDL_CTL	*/
+	{ 0x26, 0x00}, /* PREDR_CTL	*/
+	{ 0x27, 0x00}, /* PRECKL_CTL	*/
+	{ 0x28, 0x00}, /* PRECKR_CTL	*/
+	{ 0x29, 0x00}, /* HFL_CTL	*/
+	{ 0x2a, 0x00}, /* HFR_CTL	*/
+	{ 0x2b, 0x05}, /* ALC_CTL	*/
+	{ 0x2c, 0x00}, /* ALC_SET1	*/
+	{ 0x2d, 0x00}, /* ALC_SET2	*/
+	{ 0x2e, 0x00}, /* BOOST_CTL	*/
+	{ 0x2f, 0x00}, /* SOFTVOL_CTL	*/
+	{ 0x30, 0x13}, /* DTMF_FREQSEL	*/
+	{ 0x31, 0x00}, /* DTMF_TONEXT1H	*/
+	{ 0x32, 0x00}, /* DTMF_TONEXT1L	*/
+	{ 0x33, 0x00}, /* DTMF_TONEXT2H	*/
+	{ 0x34, 0x00}, /* DTMF_TONEXT2L	*/
+	{ 0x35, 0x79}, /* DTMF_TONOFF	*/
+	{ 0x36, 0x11}, /* DTMF_WANONOFF	*/
+	{ 0x37, 0x00}, /* I2S_RX_SCRAMBLE_H */
+	{ 0x38, 0x00}, /* I2S_RX_SCRAMBLE_M */
+	{ 0x39, 0x00}, /* I2S_RX_SCRAMBLE_L */
+	{ 0x3a, 0x06}, /* APLL_CTL */
+	{ 0x3b, 0x00}, /* DTMF_CTL */
+	{ 0x3c, 0x44}, /* DTMF_PGA_CTL2	(0x3C) */
+	{ 0x3d, 0x69}, /* DTMF_PGA_CTL1	(0x3D) */
+	{ 0x3e, 0x00}, /* MISC_SET_1 */
+	{ 0x3f, 0x00}, /* PCMBTMUX */
+	/* 0x40 - 0x42  Unused */
+	{ 0x43, 0x00}, /* RX_PATH_SEL */
+	{ 0x44, 0x32}, /* VDL_APGA_CTL */
+	{ 0x45, 0x00}, /* VIBRA_CTL */
+	{ 0x46, 0x00}, /* VIBRA_SET */
+	{ 0x47, 0x00}, /* VIBRA_PWM_SET	*/
+	{ 0x48, 0x00}, /* ANAMIC_GAIN	*/
+	{ 0x49, 0x00}, /* MISC_SET_2	*/
+	/* End of Audio Registers */
+};
+
+static bool twl4030_49_nop_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case 0:
+	case 3:
+	case 40:
+	case 41:
+	case 42:
+		return false;
+	default:
+		return true;
+	}
+}
+
+static const struct regmap_range twl4030_49_volatile_ranges[] = {
+	regmap_reg_range(TWL4030_BASEADD_TEST, 0xff),
+};
+
+static const struct regmap_access_table twl4030_49_volatile_table = {
+	.yes_ranges = twl4030_49_volatile_ranges,
+	.n_yes_ranges = ARRAY_SIZE(twl4030_49_volatile_ranges),
+};
+
 static struct regmap_config twl4030_regmap_config[4] = {
 	{
 		/* Address 0x48 */
@@ -212,6 +314,15 @@ static struct regmap_config twl4030_regmap_config[4] = {
 		.reg_bits = 8,
 		.val_bits = 8,
 		.max_register = 0xff,
+
+		.readable_reg = twl4030_49_nop_reg,
+		.writeable_reg = twl4030_49_nop_reg,
+
+		.volatile_table = &twl4030_49_volatile_table,
+
+		.reg_defaults = twl4030_49_defaults,
+		.num_reg_defaults = ARRAY_SIZE(twl4030_49_defaults),
+		.cache_type = REGCACHE_RBTREE,
 	},
 	{
 		/* Address 0x4a */
@@ -301,6 +412,32 @@ unsigned int twl_rev(void)
 }
 EXPORT_SYMBOL(twl_rev);
 
+/**
+ * twl_get_regmap - Get the regmap associated with the given module
+ * @mod_no: module number
+ *
+ * Returns the regmap pointer or NULL in case of failure.
+ */
+static struct regmap *twl_get_regmap(u8 mod_no)
+{
+	int sid;
+	struct twl_client *twl;
+
+	if (unlikely(!twl_priv || !twl_priv->ready)) {
+		pr_err("%s: not initialized\n", DRIVER_NAME);
+		return NULL;
+	}
+	if (unlikely(mod_no >= twl_get_last_module())) {
+		pr_err("%s: invalid module number %d\n", DRIVER_NAME, mod_no);
+		return NULL;
+	}
+
+	sid = twl_priv->twl_map[mod_no].sid;
+	twl = &twl_priv->twl_modules[sid];
+
+	return twl->regmap;
+}
+
 /**
  * twl_i2c_write - Writes a n bit register in TWL4030/TWL5030/TWL60X0
  * @mod_no: module number
@@ -312,25 +449,14 @@ EXPORT_SYMBOL(twl_rev);
  */
 int twl_i2c_write(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes)
 {
+	struct regmap *regmap = twl_get_regmap(mod_no);
 	int ret;
-	int sid;
-	struct twl_client *twl;
 
-	if (unlikely(!twl_priv || !twl_priv->ready)) {
+	if (!regmap)
-		pr_err("%s: not initialized\n", DRIVER_NAME);
 		return -EPERM;
-	}
-	if (unlikely(mod_no >= twl_get_last_module())) {
-		pr_err("%s: invalid module number %d\n", DRIVER_NAME, mod_no);
-		return -EPERM;
-	}
 
-	sid = twl_priv->twl_map[mod_no].sid;
+	ret = regmap_bulk_write(regmap, twl_priv->twl_map[mod_no].base + reg,
-	twl = &twl_priv->twl_modules[sid];
+				value, num_bytes);
-
-	ret = regmap_bulk_write(twl->regmap,
-				twl_priv->twl_map[mod_no].base + reg, value,
-				num_bytes);
 
 	if (ret)
 		pr_err("%s: Write failed (mod %d, reg 0x%02x count %d)\n",
@@ -351,25 +477,14 @@ EXPORT_SYMBOL(twl_i2c_write);
  */
 int twl_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes)
 {
+	struct regmap *regmap = twl_get_regmap(mod_no);
 	int ret;
-	int sid;
-	struct twl_client *twl;
 
-	if (unlikely(!twl_priv || !twl_priv->ready)) {
+	if (!regmap)
-		pr_err("%s: not initialized\n", DRIVER_NAME);
 		return -EPERM;
-	}
-	if (unlikely(mod_no >= twl_get_last_module())) {
-		pr_err("%s: invalid module number %d\n", DRIVER_NAME, mod_no);
-		return -EPERM;
-	}
 
-	sid = twl_priv->twl_map[mod_no].sid;
+	ret = regmap_bulk_read(regmap, twl_priv->twl_map[mod_no].base + reg,
-	twl = &twl_priv->twl_modules[sid];
+			       value, num_bytes);
-
-	ret = regmap_bulk_read(twl->regmap,
-			       twl_priv->twl_map[mod_no].base + reg, value,
-			       num_bytes);
 
 	if (ret)
 		pr_err("%s: Read failed (mod %d, reg 0x%02x count %d)\n",
@@ -379,6 +494,27 @@ int twl_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes)
 }
 EXPORT_SYMBOL(twl_i2c_read);
 
+/**
+ * twl_regcache_bypass - Configure the regcache bypass for the regmap associated
+ *			 with the module
+ * @mod_no: module number
+ * @enable: Regcache bypass state
+ *
+ * Returns 0 else failure.
+ */
+int twl_set_regcache_bypass(u8 mod_no, bool enable)
+{
+	struct regmap *regmap = twl_get_regmap(mod_no);
+
+	if (!regmap)
+		return -EPERM;
+
+	regcache_cache_bypass(regmap, enable);
+
+	return 0;
+}
+EXPORT_SYMBOL(twl_set_regcache_bypass);
+
 /*----------------------------------------------------------------------*/
 
 /**

drivers/mfd/twl6040.c

@@ -44,6 +44,54 @@
 #define VIBRACTRL_MEMBER(reg) ((reg == TWL6040_REG_VIBCTLL) ? 0 : 1)
 #define TWL6040_NUM_SUPPLIES	(2)
 
+static struct reg_default twl6040_defaults[] = {
+	{ 0x01, 0x4B }, /* REG_ASICID	(ro) */
+	{ 0x02, 0x00 }, /* REG_ASICREV	(ro) */
+	{ 0x03, 0x00 }, /* REG_INTID	*/
+	{ 0x04, 0x00 }, /* REG_INTMR	*/
+	{ 0x05, 0x00 }, /* REG_NCPCTRL	*/
+	{ 0x06, 0x00 }, /* REG_LDOCTL	*/
+	{ 0x07, 0x60 }, /* REG_HPPLLCTL	*/
+	{ 0x08, 0x00 }, /* REG_LPPLLCTL	*/
+	{ 0x09, 0x4A }, /* REG_LPPLLDIV	*/
+	{ 0x0A, 0x00 }, /* REG_AMICBCTL	*/
+	{ 0x0B, 0x00 }, /* REG_DMICBCTL	*/
+	{ 0x0C, 0x00 }, /* REG_MICLCTL	*/
+	{ 0x0D, 0x00 }, /* REG_MICRCTL	*/
+	{ 0x0E, 0x00 }, /* REG_MICGAIN	*/
+	{ 0x0F, 0x1B }, /* REG_LINEGAIN	*/
+	{ 0x10, 0x00 }, /* REG_HSLCTL	*/
+	{ 0x11, 0x00 }, /* REG_HSRCTL	*/
+	{ 0x12, 0x00 }, /* REG_HSGAIN	*/
+	{ 0x13, 0x00 }, /* REG_EARCTL	*/
+	{ 0x14, 0x00 }, /* REG_HFLCTL	*/
+	{ 0x15, 0x00 }, /* REG_HFLGAIN	*/
+	{ 0x16, 0x00 }, /* REG_HFRCTL	*/
+	{ 0x17, 0x00 }, /* REG_HFRGAIN	*/
+	{ 0x18, 0x00 }, /* REG_VIBCTLL	*/
+	{ 0x19, 0x00 }, /* REG_VIBDATL	*/
+	{ 0x1A, 0x00 }, /* REG_VIBCTLR	*/
+	{ 0x1B, 0x00 }, /* REG_VIBDATR	*/
+	{ 0x1C, 0x00 }, /* REG_HKCTL1	*/
+	{ 0x1D, 0x00 }, /* REG_HKCTL2	*/
+	{ 0x1E, 0x00 }, /* REG_GPOCTL	*/
+	{ 0x1F, 0x00 }, /* REG_ALB	*/
+	{ 0x20, 0x00 }, /* REG_DLB	*/
+	/* 0x28, REG_TRIM1 */
+	/* 0x29, REG_TRIM2 */
+	/* 0x2A, REG_TRIM3 */
+	/* 0x2B, REG_HSOTRIM */
+	/* 0x2C, REG_HFOTRIM */
+	{ 0x2D, 0x08 }, /* REG_ACCCTL	*/
+	{ 0x2E, 0x00 }, /* REG_STATUS	(ro) */
+};
+
+struct reg_default twl6040_patch[] = {
+	/* Select I2C bus access to dual access registers */
+	{ TWL6040_REG_ACCCTL, 0x09 },
+};
+
+
 static bool twl6040_has_vibra(struct device_node *node)
 {
 #ifdef CONFIG_OF
@@ -238,6 +286,9 @@ int twl6040_power(struct twl6040 *twl6040, int on)
 		if (twl6040->power_count++)
 			goto out;
 
+		/* Allow writes to the chip */
+		regcache_cache_only(twl6040->regmap, false);
+
 		if (gpio_is_valid(twl6040->audpwron)) {
 			/* use automatic power-up sequence */
 			ret = twl6040_power_up_automatic(twl6040);
@@ -253,6 +304,10 @@ int twl6040_power(struct twl6040 *twl6040, int on)
 				goto out;
 			}
 		}
+
+		/* Sync with the HW */
+		regcache_sync(twl6040->regmap);
+
 		/* Default PLL configuration after power up */
 		twl6040->pll = TWL6040_SYSCLK_SEL_LPPLL;
 		twl6040->sysclk = 19200000;
@@ -279,6 +334,11 @@ int twl6040_power(struct twl6040 *twl6040, int on)
 			/* use manual power-down sequence */
 			twl6040_power_down_manual(twl6040);
 		}
+
+		/* Set regmap to cache only and mark it as dirty */
+		regcache_cache_only(twl6040->regmap, true);
+		regcache_mark_dirty(twl6040->regmap);
+
 		twl6040->sysclk = 0;
 		twl6040->mclk = 0;
 	}
@@ -490,9 +550,24 @@ static bool twl6040_readable_reg(struct device *dev, unsigned int reg)
 static bool twl6040_volatile_reg(struct device *dev, unsigned int reg)
 {
 	switch (reg) {
-	case TWL6040_REG_VIBCTLL:
+	case TWL6040_REG_ASICID:
-	case TWL6040_REG_VIBCTLR:
+	case TWL6040_REG_ASICREV:
-	case TWL6040_REG_INTMR:
+	case TWL6040_REG_INTID:
+	case TWL6040_REG_LPPLLCTL:
+	case TWL6040_REG_HPPLLCTL:
+	case TWL6040_REG_STATUS:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool twl6040_writeable_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case TWL6040_REG_ASICID:
+	case TWL6040_REG_ASICREV:
+	case TWL6040_REG_STATUS:
 		return false;
 	default:
 		return true;
@@ -502,10 +577,15 @@ static bool twl6040_volatile_reg(struct device *dev, unsigned int reg)
 static struct regmap_config twl6040_regmap_config = {
 	.reg_bits = 8,
 	.val_bits = 8,
+
+	.reg_defaults = twl6040_defaults,
+	.num_reg_defaults = ARRAY_SIZE(twl6040_defaults),
+
 	.max_register = TWL6040_REG_STATUS, /* 0x2e */
 
 	.readable_reg = twl6040_readable_reg,
 	.volatile_reg = twl6040_volatile_reg,
+	.writeable_reg = twl6040_writeable_reg,
 
 	.cache_type = REGCACHE_RBTREE,
 };
@@ -624,6 +704,8 @@ static int twl6040_probe(struct i2c_client *client,
 
 	/* dual-access registers controlled by I2C only */
 	twl6040_set_bits(twl6040, TWL6040_REG_ACCCTL, TWL6040_I2CSEL);
+	regmap_register_patch(twl6040->regmap, twl6040_patch,
+			      ARRAY_SIZE(twl6040_patch));
 
 	/*
 	 * The main functionality of twl6040 to provide audio on OMAP4+ systems.
@@ -656,6 +738,10 @@ static int twl6040_probe(struct i2c_client *client,
 	cell->name = "twl6040-gpo";
 	children++;
 
+	/* The chip is powered down so mark regmap to cache only and dirty */
+	regcache_cache_only(twl6040->regmap, true);
+	regcache_mark_dirty(twl6040->regmap);
+
 	ret = mfd_add_devices(&client->dev, -1, twl6040->cells, children,
 			      NULL, 0, NULL);
 	if (ret)

drivers/mfd/wm5110-tables.c

@@ -14,6 +14,7 @@
 
 #include <linux/mfd/arizona/core.h>
 #include <linux/mfd/arizona/registers.h>
+#include <linux/device.h>
 
 #include "arizona.h"
 
@@ -524,6 +525,7 @@ static const struct reg_default wm5110_reg_default[] = {
 	{ 0x00000300, 0x0000 },    /* R768   - Input Enables */
 	{ 0x00000308, 0x0000 },    /* R776   - Input Rate */
 	{ 0x00000309, 0x0022 },    /* R777   - Input Volume Ramp */
+	{ 0x0000030C, 0x0002 },    /* R780   - HPF Control */
 	{ 0x00000310, 0x2080 },    /* R784   - IN1L Control */
 	{ 0x00000311, 0x0180 },    /* R785   - ADC Digital Volume 1L */
 	{ 0x00000312, 0x0000 },    /* R786   - DMIC1L Control */
@@ -545,6 +547,7 @@ static const struct reg_default wm5110_reg_default[] = {
 	{ 0x00000328, 0x2000 },    /* R808   - IN4L Control */
 	{ 0x00000329, 0x0180 },    /* R809   - ADC Digital Volume 4L */
 	{ 0x0000032A, 0x0000 },    /* R810   - DMIC4L Control */
+	{ 0x0000032C, 0x0000 },    /* R812   - IN4R Control */
 	{ 0x0000032D, 0x0180 },    /* R813   - ADC Digital Volume 4R */
 	{ 0x0000032E, 0x0000 },    /* R814   - DMIC4R Control */
 	{ 0x00000400, 0x0000 },    /* R1024  - Output Enables 1 */
@@ -598,6 +601,7 @@ static const struct reg_default wm5110_reg_default[] = {
 	{ 0x0000043D, 0x0180 },    /* R1085  - DAC Digital Volume 6R */
 	{ 0x0000043E, 0x0080 },    /* R1086  - DAC Volume Limit 6R */
 	{ 0x0000043F, 0x0800 },    /* R1087  - Noise Gate Select 6R */
+	{ 0x00000440, 0x8FFF },    /* R1088  - DRE Enable */
 	{ 0x00000450, 0x0000 },    /* R1104  - DAC AEC Control 1 */
 	{ 0x00000458, 0x0000 },    /* R1112  - Noise Gate Control */
 	{ 0x00000480, 0x0040 },    /* R1152  - Class W ANC Threshold 1 */
@@ -606,6 +610,9 @@ static const struct reg_default wm5110_reg_default[] = {
 	{ 0x00000491, 0x0000 },    /* R1169  - PDM SPK1 CTRL 2 */
 	{ 0x00000492, 0x0069 },    /* R1170  - PDM SPK2 CTRL 1 */
 	{ 0x00000493, 0x0000 },    /* R1171  - PDM SPK2 CTRL 2 */
+	{ 0x000004A0, 0x3480 },    /* R1184  - HP1 Short Circuit Ctrl */
+	{ 0x000004A1, 0x3480 },    /* R1185  - HP2 Short Circuit Ctrl */
+	{ 0x000004A2, 0x3480 },    /* R1186  - HP3 Short Circuit Ctrl */
 	{ 0x00000500, 0x000C },    /* R1280  - AIF1 BCLK Ctrl */
 	{ 0x00000501, 0x0008 },    /* R1281  - AIF1 Tx Pin Ctrl */
 	{ 0x00000502, 0x0000 },    /* R1282  - AIF1 Rx Pin Ctrl */
@@ -882,6 +889,38 @@ static const struct reg_default wm5110_reg_default[] = {
 	{ 0x0000074D, 0x0080 },    /* R1869  - AIF2TX2MIX Input 3 Volume */
 	{ 0x0000074E, 0x0000 },    /* R1870  - AIF2TX2MIX Input 4 Source */
 	{ 0x0000074F, 0x0080 },    /* R1871  - AIF2TX2MIX Input 4 Volume */
+	{ 0x00000750, 0x0000 },    /* R1872  - AIF2TX3MIX Input 1 Source */
+	{ 0x00000751, 0x0080 },    /* R1873  - AIF2TX3MIX Input 1 Volume */
+	{ 0x00000752, 0x0000 },    /* R1874  - AIF2TX3MIX Input 2 Source */
+	{ 0x00000753, 0x0080 },    /* R1875  - AIF2TX3MIX Input 2 Volume */
+	{ 0x00000754, 0x0000 },    /* R1876  - AIF2TX3MIX Input 3 Source */
+	{ 0x00000755, 0x0080 },    /* R1877  - AIF2TX3MIX Input 3 Volume */
+	{ 0x00000756, 0x0000 },    /* R1878  - AIF2TX3MIX Input 4 Source */
+	{ 0x00000757, 0x0080 },    /* R1879  - AIF2TX3MIX Input 4 Volume */
+	{ 0x00000758, 0x0000 },    /* R1880  - AIF2TX4MIX Input 1 Source */
+	{ 0x00000759, 0x0080 },    /* R1881  - AIF2TX4MIX Input 1 Volume */
+	{ 0x0000075A, 0x0000 },    /* R1882  - AIF2TX4MIX Input 2 Source */
+	{ 0x0000075B, 0x0080 },    /* R1883  - AIF2TX4MIX Input 2 Volume */
+	{ 0x0000075C, 0x0000 },    /* R1884  - AIF2TX4MIX Input 3 Source */
+	{ 0x0000075D, 0x0080 },    /* R1885  - AIF2TX4MIX Input 3 Volume */
+	{ 0x0000075E, 0x0000 },    /* R1886  - AIF2TX4MIX Input 4 Source */
+	{ 0x0000075F, 0x0080 },    /* R1887  - AIF2TX4MIX Input 4 Volume */
+	{ 0x00000760, 0x0000 },    /* R1888  - AIF2TX5MIX Input 1 Source */
+	{ 0x00000761, 0x0080 },    /* R1889  - AIF2TX5MIX Input 1 Volume */
+	{ 0x00000762, 0x0000 },    /* R1890  - AIF2TX5MIX Input 2 Source */
+	{ 0x00000763, 0x0080 },    /* R1891  - AIF2TX5MIX Input 2 Volume */
+	{ 0x00000764, 0x0000 },    /* R1892  - AIF2TX5MIX Input 3 Source */
+	{ 0x00000765, 0x0080 },    /* R1893  - AIF2TX5MIX Input 3 Volume */
+	{ 0x00000766, 0x0000 },    /* R1894  - AIF2TX5MIX Input 4 Source */
+	{ 0x00000767, 0x0080 },    /* R1895  - AIF2TX5MIX Input 4 Volume */
+	{ 0x00000768, 0x0000 },    /* R1896  - AIF2TX6MIX Input 1 Source */
+	{ 0x00000769, 0x0080 },    /* R1897  - AIF2TX6MIX Input 1 Volume */
+	{ 0x0000076A, 0x0000 },    /* R1898  - AIF2TX6MIX Input 2 Source */
+	{ 0x0000076B, 0x0080 },    /* R1899  - AIF2TX6MIX Input 2 Volume */
+	{ 0x0000076C, 0x0000 },    /* R1900  - AIF2TX6MIX Input 3 Source */
+	{ 0x0000076D, 0x0080 },    /* R1901  - AIF2TX6MIX Input 3 Volume */
+	{ 0x0000076E, 0x0000 },    /* R1902  - AIF2TX6MIX Input 4 Source */
+	{ 0x0000076F, 0x0080 },    /* R1903  - AIF2TX6MIX Input 4 Volume */
 	{ 0x00000780, 0x0000 },    /* R1920  - AIF3TX1MIX Input 1 Source */
 	{ 0x00000781, 0x0080 },    /* R1921  - AIF3TX1MIX Input 1 Volume */
 	{ 0x00000782, 0x0000 },    /* R1922  - AIF3TX1MIX Input 2 Source */
@@ -1342,6 +1381,64 @@ static const struct reg_default wm5110_reg_default[] = {
 	{ 0x00001404, 0x0000 },    /* R5124  - DSP4 Status 1 */
 };
 
+static bool wm5110_is_rev_b_adsp_memory(unsigned int reg)
+{
+	if ((reg >= 0x100000 && reg < 0x103000) ||
+	    (reg >= 0x180000 && reg < 0x181000) ||
+	    (reg >= 0x190000 && reg < 0x192000) ||
+	    (reg >= 0x1a8000 && reg < 0x1a9000) ||
+	    (reg >= 0x200000 && reg < 0x209000) ||
+	    (reg >= 0x280000 && reg < 0x281000) ||
+	    (reg >= 0x290000 && reg < 0x29a000) ||
+	    (reg >= 0x2a8000 && reg < 0x2aa000) ||
+	    (reg >= 0x300000 && reg < 0x30f000) ||
+	    (reg >= 0x380000 && reg < 0x382000) ||
+	    (reg >= 0x390000 && reg < 0x39e000) ||
+	    (reg >= 0x3a8000 && reg < 0x3b6000) ||
+	    (reg >= 0x400000 && reg < 0x403000) ||
+	    (reg >= 0x480000 && reg < 0x481000) ||
+	    (reg >= 0x490000 && reg < 0x492000) ||
+	    (reg >= 0x4a8000 && reg < 0x4a9000))
+		return true;
+	else
+		return false;
+}
+
+static bool wm5110_is_rev_d_adsp_memory(unsigned int reg)
+{
+	if ((reg >= 0x100000 && reg < 0x106000) ||
+	    (reg >= 0x180000 && reg < 0x182000) ||
+	    (reg >= 0x190000 && reg < 0x198000) ||
+	    (reg >= 0x1a8000 && reg < 0x1aa000) ||
+	    (reg >= 0x200000 && reg < 0x20f000) ||
+	    (reg >= 0x280000 && reg < 0x282000) ||
+	    (reg >= 0x290000 && reg < 0x29c000) ||
+	    (reg >= 0x2a6000 && reg < 0x2b4000) ||
+	    (reg >= 0x300000 && reg < 0x30f000) ||
+	    (reg >= 0x380000 && reg < 0x382000) ||
+	    (reg >= 0x390000 && reg < 0x3a2000) ||
+	    (reg >= 0x3a6000 && reg < 0x3b4000) ||
+	    (reg >= 0x400000 && reg < 0x406000) ||
+	    (reg >= 0x480000 && reg < 0x482000) ||
+	    (reg >= 0x490000 && reg < 0x498000) ||
+	    (reg >= 0x4a8000 && reg < 0x4aa000))
+		return true;
+	else
+		return false;
+}
+
+static bool wm5110_is_adsp_memory(struct device *dev, unsigned int reg)
+{
+	struct arizona *arizona = dev_get_drvdata(dev);
+
+	switch (arizona->rev) {
+	case 0 ... 2:
+		return wm5110_is_rev_b_adsp_memory(reg);
+	default:
+		return wm5110_is_rev_d_adsp_memory(reg);
+	}
+}
+
 static bool wm5110_readable_register(struct device *dev, unsigned int reg)
 {
 	switch (reg) {
@@ -1460,6 +1557,7 @@ static bool wm5110_readable_register(struct device *dev, unsigned int reg)
 	case ARIZONA_INPUT_ENABLES_STATUS:
 	case ARIZONA_INPUT_RATE:
 	case ARIZONA_INPUT_VOLUME_RAMP:
+	case ARIZONA_HPF_CONTROL:
 	case ARIZONA_IN1L_CONTROL:
 	case ARIZONA_ADC_DIGITAL_VOLUME_1L:
 	case ARIZONA_DMIC1L_CONTROL:
@@ -1481,6 +1579,7 @@ static bool wm5110_readable_register(struct device *dev, unsigned int reg)
 	case ARIZONA_IN4L_CONTROL:
 	case ARIZONA_ADC_DIGITAL_VOLUME_4L:
 	case ARIZONA_DMIC4L_CONTROL:
+	case ARIZONA_IN4R_CONTROL:
 	case ARIZONA_ADC_DIGITAL_VOLUME_4R:
 	case ARIZONA_DMIC4R_CONTROL:
 	case ARIZONA_OUTPUT_ENABLES_1:
@@ -1536,12 +1635,16 @@ static bool wm5110_readable_register(struct device *dev, unsigned int reg)
 	case ARIZONA_DAC_DIGITAL_VOLUME_6R:
 	case ARIZONA_DAC_VOLUME_LIMIT_6R:
 	case ARIZONA_NOISE_GATE_SELECT_6R:
+	case ARIZONA_DRE_ENABLE:
 	case ARIZONA_DAC_AEC_CONTROL_1:
 	case ARIZONA_NOISE_GATE_CONTROL:
 	case ARIZONA_PDM_SPK1_CTRL_1:
 	case ARIZONA_PDM_SPK1_CTRL_2:
 	case ARIZONA_PDM_SPK2_CTRL_1:
 	case ARIZONA_PDM_SPK2_CTRL_2:
+	case ARIZONA_HP1_SHORT_CIRCUIT_CTRL:
+	case ARIZONA_HP2_SHORT_CIRCUIT_CTRL:
+	case ARIZONA_HP3_SHORT_CIRCUIT_CTRL:
 	case ARIZONA_AIF1_BCLK_CTRL:
 	case ARIZONA_AIF1_TX_PIN_CTRL:
 	case ARIZONA_AIF1_RX_PIN_CTRL:
@@ -1820,6 +1923,38 @@ static bool wm5110_readable_register(struct device *dev, unsigned int reg)
 	case ARIZONA_AIF2TX2MIX_INPUT_3_VOLUME:
 	case ARIZONA_AIF2TX2MIX_INPUT_4_SOURCE:
 	case ARIZONA_AIF2TX2MIX_INPUT_4_VOLUME:
+	case ARIZONA_AIF2TX3MIX_INPUT_1_SOURCE:
+	case ARIZONA_AIF2TX3MIX_INPUT_1_VOLUME:
+	case ARIZONA_AIF2TX3MIX_INPUT_2_SOURCE:
+	case ARIZONA_AIF2TX3MIX_INPUT_2_VOLUME:
+	case ARIZONA_AIF2TX3MIX_INPUT_3_SOURCE:
+	case ARIZONA_AIF2TX3MIX_INPUT_3_VOLUME:
+	case ARIZONA_AIF2TX3MIX_INPUT_4_SOURCE:
+	case ARIZONA_AIF2TX3MIX_INPUT_4_VOLUME:
+	case ARIZONA_AIF2TX4MIX_INPUT_1_SOURCE:
+	case ARIZONA_AIF2TX4MIX_INPUT_1_VOLUME:
+	case ARIZONA_AIF2TX4MIX_INPUT_2_SOURCE:
+	case ARIZONA_AIF2TX4MIX_INPUT_2_VOLUME:
+	case ARIZONA_AIF2TX4MIX_INPUT_3_SOURCE:
+	case ARIZONA_AIF2TX4MIX_INPUT_3_VOLUME:
+	case ARIZONA_AIF2TX4MIX_INPUT_4_SOURCE:
+	case ARIZONA_AIF2TX4MIX_INPUT_4_VOLUME:
+	case ARIZONA_AIF2TX5MIX_INPUT_1_SOURCE:
+	case ARIZONA_AIF2TX5MIX_INPUT_1_VOLUME:
+	case ARIZONA_AIF2TX5MIX_INPUT_2_SOURCE:
+	case ARIZONA_AIF2TX5MIX_INPUT_2_VOLUME:
+	case ARIZONA_AIF2TX5MIX_INPUT_3_SOURCE:
+	case ARIZONA_AIF2TX5MIX_INPUT_3_VOLUME:
+	case ARIZONA_AIF2TX5MIX_INPUT_4_SOURCE:
+	case ARIZONA_AIF2TX5MIX_INPUT_4_VOLUME:
+	case ARIZONA_AIF2TX6MIX_INPUT_1_SOURCE:
+	case ARIZONA_AIF2TX6MIX_INPUT_1_VOLUME:
+	case ARIZONA_AIF2TX6MIX_INPUT_2_SOURCE:
+	case ARIZONA_AIF2TX6MIX_INPUT_2_VOLUME:
+	case ARIZONA_AIF2TX6MIX_INPUT_3_SOURCE:
+	case ARIZONA_AIF2TX6MIX_INPUT_3_VOLUME:
+	case ARIZONA_AIF2TX6MIX_INPUT_4_SOURCE:
+	case ARIZONA_AIF2TX6MIX_INPUT_4_VOLUME:
 	case ARIZONA_AIF3TX1MIX_INPUT_1_SOURCE:
 	case ARIZONA_AIF3TX1MIX_INPUT_1_VOLUME:
 	case ARIZONA_AIF3TX1MIX_INPUT_2_SOURCE:
@@ -2331,7 +2466,7 @@ static bool wm5110_readable_register(struct device *dev, unsigned int reg)
 	case ARIZONA_DSP4_SCRATCH_3:
 		return true;
 	default:
-		return false;
+		return wm5110_is_adsp_memory(dev, reg);
 	}
 }
 
@@ -2407,16 +2542,18 @@ static bool wm5110_volatile_register(struct device *dev, unsigned int reg)
 	case ARIZONA_DSP4_SCRATCH_3:
 		return true;
 	default:
-		return false;
+		return wm5110_is_adsp_memory(dev, reg);
 	}
 }
 
+#define WM5110_MAX_REGISTER 0x4a9fff
+
 const struct regmap_config wm5110_spi_regmap = {
 	.reg_bits = 32,
 	.pad_bits = 16,
 	.val_bits = 16,
 
-	.max_register = ARIZONA_DSP1_STATUS_2,
+	.max_register = WM5110_MAX_REGISTER,
 	.readable_reg = wm5110_readable_register,
 	.volatile_reg = wm5110_volatile_register,
 
@@ -2430,7 +2567,7 @@ const struct regmap_config wm5110_i2c_regmap = {
 	.reg_bits = 32,
 	.val_bits = 16,
 
-	.max_register = ARIZONA_DSP1_STATUS_2,
+	.max_register = WM5110_MAX_REGISTER,
 	.readable_reg = wm5110_readable_register,
 	.volatile_reg = wm5110_volatile_register,
 

drivers/spi/Kconfig

@@ -395,7 +395,7 @@ config SPI_S3C24XX_FIQ
 config SPI_S3C64XX
 	tristate "Samsung S3C64XX series type SPI"
 	depends on PLAT_SAMSUNG
-	select S3C64XX_DMA if ARCH_S3C64XX
+	select S3C64XX_PL080 if ARCH_S3C64XX
 	help
 	  SPI driver for Samsung S3C64XX and newer SoCs.
 

include/linux/dmaengine.h

@@ -22,6 +22,7 @@
 #define LINUX_DMAENGINE_H
 
 #include <linux/device.h>
+#include <linux/err.h>
 #include <linux/uio.h>
 #include <linux/bug.h>
 #include <linux/scatterlist.h>
@@ -363,6 +364,32 @@ struct dma_slave_config {
 	unsigned int slave_id;
 };
 
+/**
+ * enum dma_residue_granularity - Granularity of the reported transfer residue
+ * @DMA_RESIDUE_GRANULARITY_DESCRIPTOR: Residue reporting is not support. The
+ *  DMA channel is only able to tell whether a descriptor has been completed or
+ *  not, which means residue reporting is not supported by this channel. The
+ *  residue field of the dma_tx_state field will always be 0.
+ * @DMA_RESIDUE_GRANULARITY_SEGMENT: Residue is updated after each successfully
+ *  completed segment of the transfer (For cyclic transfers this is after each
+ *  period). This is typically implemented by having the hardware generate an
+ *  interrupt after each transferred segment and then the drivers updates the
+ *  outstanding residue by the size of the segment. Another possibility is if
+ *  the hardware supports scatter-gather and the segment descriptor has a field
+ *  which gets set after the segment has been completed. The driver then counts
+ *  the number of segments without the flag set to compute the residue.
+ * @DMA_RESIDUE_GRANULARITY_BURST: Residue is updated after each transferred
+ *  burst. This is typically only supported if the hardware has a progress
+ *  register of some sort (E.g. a register with the current read/write address
+ *  or a register with the amount of bursts/beats/bytes that have been
+ *  transferred or still need to be transferred).
+ */
+enum dma_residue_granularity {
+	DMA_RESIDUE_GRANULARITY_DESCRIPTOR = 0,
+	DMA_RESIDUE_GRANULARITY_SEGMENT = 1,
+	DMA_RESIDUE_GRANULARITY_BURST = 2,
+};
+
 /* struct dma_slave_caps - expose capabilities of a slave channel only
  *
  * @src_addr_widths: bit mask of src addr widths the channel supports
@@ -373,6 +400,7 @@ struct dma_slave_config {
  * 	should be checked by controller as well
  * @cmd_pause: true, if pause and thereby resume is supported
  * @cmd_terminate: true, if terminate cmd is supported
+ * @residue_granularity: granularity of the reported transfer residue
  */
 struct dma_slave_caps {
 	u32 src_addr_widths;
@@ -380,6 +408,7 @@ struct dma_slave_caps {
 	u32 directions;
 	bool cmd_pause;
 	bool cmd_terminate;
+	enum dma_residue_granularity residue_granularity;
 };
 
 static inline const char *dma_chan_name(struct dma_chan *chan)
@@ -1040,6 +1069,8 @@ enum dma_status dma_wait_for_async_tx(struct dma_async_tx_descriptor *tx);
 void dma_issue_pending_all(void);
 struct dma_chan *__dma_request_channel(const dma_cap_mask_t *mask,
 					dma_filter_fn fn, void *fn_param);
+struct dma_chan *dma_request_slave_channel_reason(struct device *dev,
+						  const char *name);
 struct dma_chan *dma_request_slave_channel(struct device *dev, const char *name);
 void dma_release_channel(struct dma_chan *chan);
 #else
@@ -1063,6 +1094,11 @@ static inline struct dma_chan *__dma_request_channel(const dma_cap_mask_t *mask,
 {
 	return NULL;
 }
+static inline struct dma_chan *dma_request_slave_channel_reason(
+					struct device *dev, const char *name)
+{
+	return ERR_PTR(-ENODEV);
+}
 static inline struct dma_chan *dma_request_slave_channel(struct device *dev,
 							 const char *name)
 {

include/linux/i2c/twl.h

@@ -175,6 +175,9 @@ static inline int twl_class_is_ ##class(void)	\
 TWL_CLASS_IS(4030, TWL4030_CLASS_ID)
 TWL_CLASS_IS(6030, TWL6030_CLASS_ID)
 
+/* Set the regcache bypass for the regmap associated with the nodule */
+int twl_set_regcache_bypass(u8 mod_no, bool enable);
+
 /*
  * Read and write several 8-bit registers at once.
  */
@@ -667,8 +670,6 @@ struct twl4030_codec_data {
 	unsigned int digimic_delay; /* in ms */
 	unsigned int ramp_delay_value;
 	unsigned int offset_cncl_path;
-	unsigned int check_defaults:1;
-	unsigned int reset_registers:1;
 	unsigned int hs_extmute:1;
 	int hs_extmute_gpio;
 };

include/linux/mfd/arizona/registers.h

@@ -139,6 +139,7 @@
 #define ARIZONA_INPUT_ENABLES_STATUS             0x301
 #define ARIZONA_INPUT_RATE                       0x308
 #define ARIZONA_INPUT_VOLUME_RAMP                0x309
+#define ARIZONA_HPF_CONTROL                      0x30C
 #define ARIZONA_IN1L_CONTROL                     0x310
 #define ARIZONA_ADC_DIGITAL_VOLUME_1L            0x311
 #define ARIZONA_DMIC1L_CONTROL                   0x312
@@ -160,6 +161,7 @@
 #define ARIZONA_IN4L_CONTROL                     0x328
 #define ARIZONA_ADC_DIGITAL_VOLUME_4L            0x329
 #define ARIZONA_DMIC4L_CONTROL                   0x32A
+#define ARIZONA_IN4R_CONTROL                     0x32C
 #define ARIZONA_ADC_DIGITAL_VOLUME_4R            0x32D
 #define ARIZONA_DMIC4R_CONTROL                   0x32E
 #define ARIZONA_OUTPUT_ENABLES_1                 0x400
@@ -224,6 +226,9 @@
 #define ARIZONA_PDM_SPK1_CTRL_2                  0x491
 #define ARIZONA_PDM_SPK2_CTRL_1                  0x492
 #define ARIZONA_PDM_SPK2_CTRL_2                  0x493
+#define ARIZONA_HP1_SHORT_CIRCUIT_CTRL           0x4A0
+#define ARIZONA_HP2_SHORT_CIRCUIT_CTRL           0x4A1
+#define ARIZONA_HP3_SHORT_CIRCUIT_CTRL           0x4A2
 #define ARIZONA_SPK_CTRL_2                       0x4B5
 #define ARIZONA_SPK_CTRL_3                       0x4B6
 #define ARIZONA_DAC_COMP_1                       0x4DC
@@ -511,6 +516,38 @@
 #define ARIZONA_AIF2TX2MIX_INPUT_3_VOLUME        0x74D
 #define ARIZONA_AIF2TX2MIX_INPUT_4_SOURCE        0x74E
 #define ARIZONA_AIF2TX2MIX_INPUT_4_VOLUME        0x74F
+#define ARIZONA_AIF2TX3MIX_INPUT_1_SOURCE        0x750
+#define ARIZONA_AIF2TX3MIX_INPUT_1_VOLUME        0x751
+#define ARIZONA_AIF2TX3MIX_INPUT_2_SOURCE        0x752
+#define ARIZONA_AIF2TX3MIX_INPUT_2_VOLUME        0x753
+#define ARIZONA_AIF2TX3MIX_INPUT_3_SOURCE        0x754
+#define ARIZONA_AIF2TX3MIX_INPUT_3_VOLUME        0x755
+#define ARIZONA_AIF2TX3MIX_INPUT_4_SOURCE        0x756
+#define ARIZONA_AIF2TX3MIX_INPUT_4_VOLUME        0x757
+#define ARIZONA_AIF2TX4MIX_INPUT_1_SOURCE        0x758
+#define ARIZONA_AIF2TX4MIX_INPUT_1_VOLUME        0x759
+#define ARIZONA_AIF2TX4MIX_INPUT_2_SOURCE        0x75A
+#define ARIZONA_AIF2TX4MIX_INPUT_2_VOLUME        0x75B
+#define ARIZONA_AIF2TX4MIX_INPUT_3_SOURCE        0x75C
+#define ARIZONA_AIF2TX4MIX_INPUT_3_VOLUME        0x75D
+#define ARIZONA_AIF2TX4MIX_INPUT_4_SOURCE        0x75E
+#define ARIZONA_AIF2TX4MIX_INPUT_4_VOLUME        0x75F
+#define ARIZONA_AIF2TX5MIX_INPUT_1_SOURCE        0x760
+#define ARIZONA_AIF2TX5MIX_INPUT_1_VOLUME        0x761
+#define ARIZONA_AIF2TX5MIX_INPUT_2_SOURCE        0x762
+#define ARIZONA_AIF2TX5MIX_INPUT_2_VOLUME        0x763
+#define ARIZONA_AIF2TX5MIX_INPUT_3_SOURCE        0x764
+#define ARIZONA_AIF2TX5MIX_INPUT_3_VOLUME        0x765
+#define ARIZONA_AIF2TX5MIX_INPUT_4_SOURCE        0x766
+#define ARIZONA_AIF2TX5MIX_INPUT_4_VOLUME        0x767
+#define ARIZONA_AIF2TX6MIX_INPUT_1_SOURCE        0x768
+#define ARIZONA_AIF2TX6MIX_INPUT_1_VOLUME        0x769
+#define ARIZONA_AIF2TX6MIX_INPUT_2_SOURCE        0x76A
+#define ARIZONA_AIF2TX6MIX_INPUT_2_VOLUME        0x76B
+#define ARIZONA_AIF2TX6MIX_INPUT_3_SOURCE        0x76C
+#define ARIZONA_AIF2TX6MIX_INPUT_3_VOLUME        0x76D
+#define ARIZONA_AIF2TX6MIX_INPUT_4_SOURCE        0x76E
+#define ARIZONA_AIF2TX6MIX_INPUT_4_VOLUME        0x76F
 #define ARIZONA_AIF3TX1MIX_INPUT_1_SOURCE        0x780
 #define ARIZONA_AIF3TX1MIX_INPUT_1_VOLUME        0x781
 #define ARIZONA_AIF3TX1MIX_INPUT_2_SOURCE        0x782
@@ -2292,9 +2329,19 @@
 #define ARIZONA_IN_VI_RAMP_SHIFT                      0  /* IN_VI_RAMP - [2:0] */
 #define ARIZONA_IN_VI_RAMP_WIDTH                      3  /* IN_VI_RAMP - [2:0] */
 
+/*
+ * R780 (0x30C) - HPF Control
+ */
+#define ARIZONA_IN_HPF_CUT_MASK                  0x0007  /* IN_HPF_CUT [2:0] */
+#define ARIZONA_IN_HPF_CUT_SHIFT                      0  /* IN_HPF_CUT [2:0] */
+#define ARIZONA_IN_HPF_CUT_WIDTH                      3  /* IN_HPF_CUT [2:0] */
+
 /*
  * R784 (0x310) - IN1L Control
  */
+#define ARIZONA_IN1L_HPF_MASK                    0x8000  /* IN1L_HPF - [15] */
+#define ARIZONA_IN1L_HPF_SHIFT                       15  /* IN1L_HPF - [15] */
+#define ARIZONA_IN1L_HPF_WIDTH                        1  /* IN1L_HPF - [15] */
 #define ARIZONA_IN1_OSR_MASK                     0x6000  /* IN1_OSR - [14:13] */
 #define ARIZONA_IN1_OSR_SHIFT                        13  /* IN1_OSR - [14:13] */
 #define ARIZONA_IN1_OSR_WIDTH                         2  /* IN1_OSR - [14:13] */
@@ -2333,6 +2380,9 @@
 /*
  * R788 (0x314) - IN1R Control
  */
+#define ARIZONA_IN1R_HPF_MASK                    0x8000  /* IN1R_HPF - [15] */
+#define ARIZONA_IN1R_HPF_SHIFT                       15  /* IN1R_HPF - [15] */
+#define ARIZONA_IN1R_HPF_WIDTH                        1  /* IN1R_HPF - [15] */
 #define ARIZONA_IN1R_PGA_VOL_MASK                0x00FE  /* IN1R_PGA_VOL - [7:1] */
 #define ARIZONA_IN1R_PGA_VOL_SHIFT                    1  /* IN1R_PGA_VOL - [7:1] */
 #define ARIZONA_IN1R_PGA_VOL_WIDTH                    7  /* IN1R_PGA_VOL - [7:1] */
@@ -2362,6 +2412,9 @@
 /*
  * R792 (0x318) - IN2L Control
  */
+#define ARIZONA_IN2L_HPF_MASK                    0x8000  /* IN2L_HPF - [15] */
+#define ARIZONA_IN2L_HPF_SHIFT                       15  /* IN2L_HPF - [15] */
+#define ARIZONA_IN2L_HPF_WIDTH                        1  /* IN2L_HPF - [15] */
 #define ARIZONA_IN2_OSR_MASK                     0x6000  /* IN2_OSR - [14:13] */
 #define ARIZONA_IN2_OSR_SHIFT                        13  /* IN2_OSR - [14:13] */
 #define ARIZONA_IN2_OSR_WIDTH                         2  /* IN2_OSR - [14:13] */
@@ -2400,6 +2453,9 @@
 /*
  * R796 (0x31C) - IN2R Control
  */
+#define ARIZONA_IN2R_HPF_MASK                    0x8000  /* IN2R_HPF - [15] */
+#define ARIZONA_IN2R_HPF_SHIFT                       15  /* IN2R_HPF - [15] */
+#define ARIZONA_IN2R_HPF_WIDTH                        1  /* IN2R_HPF - [15] */
 #define ARIZONA_IN2R_PGA_VOL_MASK                0x00FE  /* IN2R_PGA_VOL - [7:1] */
 #define ARIZONA_IN2R_PGA_VOL_SHIFT                    1  /* IN2R_PGA_VOL - [7:1] */
 #define ARIZONA_IN2R_PGA_VOL_WIDTH                    7  /* IN2R_PGA_VOL - [7:1] */
@@ -2429,6 +2485,9 @@
 /*
  * R800 (0x320) - IN3L Control
  */
+#define ARIZONA_IN3L_HPF_MASK                    0x8000  /* IN3L_HPF - [15] */
+#define ARIZONA_IN3L_HPF_SHIFT                       15  /* IN3L_HPF - [15] */
+#define ARIZONA_IN3L_HPF_WIDTH                        1  /* IN3L_HPF - [15] */
 #define ARIZONA_IN3_OSR_MASK                     0x6000  /* IN3_OSR - [14:13] */
 #define ARIZONA_IN3_OSR_SHIFT                        13  /* IN3_OSR - [14:13] */
 #define ARIZONA_IN3_OSR_WIDTH                         2  /* IN3_OSR - [14:13] */
@@ -2467,6 +2526,9 @@
 /*
  * R804 (0x324) - IN3R Control
  */
+#define ARIZONA_IN3R_HPF_MASK                    0x8000  /* IN3R_HPF - [15] */
+#define ARIZONA_IN3R_HPF_SHIFT                       15  /* IN3R_HPF - [15] */
+#define ARIZONA_IN3R_HPF_WIDTH                        1  /* IN3R_HPF - [15] */
 #define ARIZONA_IN3R_PGA_VOL_MASK                0x00FE  /* IN3R_PGA_VOL - [7:1] */
 #define ARIZONA_IN3R_PGA_VOL_SHIFT                    1  /* IN3R_PGA_VOL - [7:1] */
 #define ARIZONA_IN3R_PGA_VOL_WIDTH                    7  /* IN3R_PGA_VOL - [7:1] */
@@ -2496,6 +2558,9 @@
 /*
  * R808 (0x328) - IN4 Control
  */
+#define ARIZONA_IN4L_HPF_MASK                    0x8000  /* IN4L_HPF - [15] */
+#define ARIZONA_IN4L_HPF_SHIFT                       15  /* IN4L_HPF - [15] */
+#define ARIZONA_IN4L_HPF_WIDTH                        1  /* IN4L_HPF - [15] */
 #define ARIZONA_IN4_OSR_MASK                     0x6000  /* IN4_OSR - [14:13] */
 #define ARIZONA_IN4_OSR_SHIFT                        13  /* IN4_OSR - [14:13] */
 #define ARIZONA_IN4_OSR_WIDTH                         2  /* IN4_OSR - [14:13] */
@@ -2525,6 +2590,13 @@
 #define ARIZONA_IN4L_DMIC_DLY_SHIFT                   0  /* IN4L_DMIC_DLY - [5:0] */
 #define ARIZONA_IN4L_DMIC_DLY_WIDTH                   6  /* IN4L_DMIC_DLY - [5:0] */
 
+/*
+ * R812 (0x32C) - IN4R Control
+ */
+#define ARIZONA_IN4R_HPF_MASK                    0x8000  /* IN4R_HPF - [15] */
+#define ARIZONA_IN4R_HPF_SHIFT                       15  /* IN4R_HPF - [15] */
+#define ARIZONA_IN4R_HPF_WIDTH                        1  /* IN4R_HPF - [15] */
+
 /*
  * R813 (0x32D) - ADC Digital Volume 4R
  */
@@ -3138,6 +3210,10 @@
 /*
  * R1088 (0x440) - DRE Enable
  */
+#define ARIZONA_DRE3R_ENA                        0x0020  /* DRE3R_ENA */
+#define ARIZONA_DRE3R_ENA_MASK                   0x0020  /* DRE3R_ENA */
+#define ARIZONA_DRE3R_ENA_SHIFT                       5  /* DRE3R_ENA */
+#define ARIZONA_DRE3R_ENA_WIDTH                       1  /* DRE3R_ENA */
 #define ARIZONA_DRE3L_ENA                        0x0010  /* DRE3L_ENA */
 #define ARIZONA_DRE3L_ENA_MASK                   0x0010  /* DRE3L_ENA */
 #define ARIZONA_DRE3L_ENA_SHIFT                       4  /* DRE3L_ENA */
@@ -3259,6 +3335,30 @@
 #define ARIZONA_SPK2_FMT_SHIFT                        0  /* SPK2_FMT */
 #define ARIZONA_SPK2_FMT_WIDTH                        1  /* SPK2_FMT */
 
+/*
+ * R1184 (0x4A0) - HP1 Short Circuit Ctrl
+ */
+#define ARIZONA_HP1_SC_ENA                       0x1000  /* HP1_SC_ENA */
+#define ARIZONA_HP1_SC_ENA_MASK                  0x1000  /* HP1_SC_ENA */
+#define ARIZONA_HP1_SC_ENA_SHIFT                     12  /* HP1_SC_ENA */
+#define ARIZONA_HP1_SC_ENA_WIDTH                      1  /* HP1_SC_ENA */
+
+/*
+ * R1185 (0x4A1) - HP2 Short Circuit Ctrl
+ */
+#define ARIZONA_HP2_SC_ENA                       0x1000  /* HP2_SC_ENA */
+#define ARIZONA_HP2_SC_ENA_MASK                  0x1000  /* HP2_SC_ENA */
+#define ARIZONA_HP2_SC_ENA_SHIFT                     12  /* HP2_SC_ENA */
+#define ARIZONA_HP2_SC_ENA_WIDTH                      1  /* HP2_SC_ENA */
+
+/*
+ * R1186 (0x4A2) - HP3 Short Circuit Ctrl
+ */
+#define ARIZONA_HP3_SC_ENA                       0x1000  /* HP3_SC_ENA */
+#define ARIZONA_HP3_SC_ENA_MASK                  0x1000  /* HP3_SC_ENA */
+#define ARIZONA_HP3_SC_ENA_SHIFT                     12  /* HP3_SC_ENA */
+#define ARIZONA_HP3_SC_ENA_WIDTH                      1  /* HP3_SC_ENA */
+
 /*
  * R1244 (0x4DC) - DAC comp 1
  */
@@ -3725,6 +3825,35 @@
 #define ARIZONA_AIF2TX2_SLOT_SHIFT                    0  /* AIF2TX2_SLOT - [5:0] */
 #define ARIZONA_AIF2TX2_SLOT_WIDTH                    6  /* AIF2TX2_SLOT - [5:0] */
 
+/*
+ * R1355 (0x54B) - AIF2 Frame Ctrl 5
+ */
+#define ARIZONA_AIF2TX3_SLOT_MASK                0x003F  /* AIF2TX3_SLOT - [5:0] */
+#define ARIZONA_AIF2TX3_SLOT_SHIFT                    0  /* AIF2TX3_SLOT - [5:0] */
+#define ARIZONA_AIF2TX3_SLOT_WIDTH                    6  /* AIF2TX3_SLOT - [5:0] */
+
+/*
+ * R1356 (0x54C) - AIF2 Frame Ctrl 6
+ */
+#define ARIZONA_AIF2TX4_SLOT_MASK                0x003F  /* AIF2TX4_SLOT - [5:0] */
+#define ARIZONA_AIF2TX4_SLOT_SHIFT                    0  /* AIF2TX4_SLOT - [5:0] */
+#define ARIZONA_AIF2TX4_SLOT_WIDTH                    6  /* AIF2TX4_SLOT - [5:0] */
+
+
+/*
+ * R1357 (0x54D) - AIF2 Frame Ctrl 7
+ */
+#define ARIZONA_AIF2TX5_SLOT_MASK                0x003F  /* AIF2TX5_SLOT - [5:0] */
+#define ARIZONA_AIF2TX5_SLOT_SHIFT                    0  /* AIF2TX5_SLOT - [5:0] */
+#define ARIZONA_AIF2TX5_SLOT_WIDTH                    6  /* AIF2TX5_SLOT - [5:0] */
+
+/*
+ * R1358 (0x54E) - AIF2 Frame Ctrl 8
+ */
+#define ARIZONA_AIF2TX6_SLOT_MASK                0x003F  /* AIF2TX6_SLOT - [5:0] */
+#define ARIZONA_AIF2TX6_SLOT_SHIFT                    0  /* AIF2TX6_SLOT - [5:0] */
+#define ARIZONA_AIF2TX6_SLOT_WIDTH                    6  /* AIF2TX6_SLOT - [5:0] */
+
 /*
  * R1361 (0x551) - AIF2 Frame Ctrl 11
  */
@@ -3739,9 +3868,53 @@
 #define ARIZONA_AIF2RX2_SLOT_SHIFT                    0  /* AIF2RX2_SLOT - [5:0] */
 #define ARIZONA_AIF2RX2_SLOT_WIDTH                    6  /* AIF2RX2_SLOT - [5:0] */
 
+/*
+ * R1363 (0x553) - AIF2 Frame Ctrl 13
+ */
+#define ARIZONA_AIF2RX3_SLOT_MASK                0x003F  /* AIF2RX3_SLOT - [5:0] */
+#define ARIZONA_AIF2RX3_SLOT_SHIFT                    0  /* AIF2RX3_SLOT - [5:0] */
+#define ARIZONA_AIF2RX3_SLOT_WIDTH                    6  /* AIF2RX3_SLOT - [5:0] */
+
+/*
+ * R1364 (0x554) - AIF2 Frame Ctrl 14
+ */
+#define ARIZONA_AIF2RX4_SLOT_MASK                0x003F  /* AIF2RX4_SLOT - [5:0] */
+#define ARIZONA_AIF2RX4_SLOT_SHIFT                    0  /* AIF2RX4_SLOT - [5:0] */
+#define ARIZONA_AIF2RX4_SLOT_WIDTH                    6  /* AIF2RX4_SLOT - [5:0] */
+
+/*
+ * R1365 (0x555) - AIF2 Frame Ctrl 15
+ */
+#define ARIZONA_AIF2RX5_SLOT_MASK                0x003F  /* AIF2RX5_SLOT - [5:0] */
+#define ARIZONA_AIF2RX5_SLOT_SHIFT                    0  /* AIF2RX5_SLOT - [5:0] */
+#define ARIZONA_AIF2RX5_SLOT_WIDTH                    6  /* AIF2RX5_SLOT - [5:0] */
+
+/*
+ * R1366 (0x556) - AIF2 Frame Ctrl 16
+ */
+#define ARIZONA_AIF2RX6_SLOT_MASK                0x003F  /* AIF2RX6_SLOT - [5:0] */
+#define ARIZONA_AIF2RX6_SLOT_SHIFT                    0  /* AIF2RX6_SLOT - [5:0] */
+#define ARIZONA_AIF2RX6_SLOT_WIDTH                    6  /* AIF2RX6_SLOT - [5:0] */
+
 /*
  * R1369 (0x559) - AIF2 Tx Enables
  */
+#define ARIZONA_AIF2TX6_ENA                      0x0020  /* AIF2TX6_ENA */
+#define ARIZONA_AIF2TX6_ENA_MASK                 0x0020  /* AIF2TX6_ENA */
+#define ARIZONA_AIF2TX6_ENA_SHIFT                     5  /* AIF2TX6_ENA */
+#define ARIZONA_AIF2TX6_ENA_WIDTH                     1  /* AIF2TX6_ENA */
+#define ARIZONA_AIF2TX5_ENA                      0x0010  /* AIF2TX5_ENA */
+#define ARIZONA_AIF2TX5_ENA_MASK                 0x0010  /* AIF2TX5_ENA */
+#define ARIZONA_AIF2TX5_ENA_SHIFT                     4  /* AIF2TX5_ENA */
+#define ARIZONA_AIF2TX5_ENA_WIDTH                     1  /* AIF2TX5_ENA */
+#define ARIZONA_AIF2TX4_ENA                      0x0008  /* AIF2TX4_ENA */
+#define ARIZONA_AIF2TX4_ENA_MASK                 0x0008  /* AIF2TX4_ENA */
+#define ARIZONA_AIF2TX4_ENA_SHIFT                     3  /* AIF2TX4_ENA */
+#define ARIZONA_AIF2TX4_ENA_WIDTH                     1  /* AIF2TX4_ENA */
+#define ARIZONA_AIF2TX3_ENA                      0x0004  /* AIF2TX3_ENA */
+#define ARIZONA_AIF2TX3_ENA_MASK                 0x0004  /* AIF2TX3_ENA */
+#define ARIZONA_AIF2TX3_ENA_SHIFT                     2  /* AIF2TX3_ENA */
+#define ARIZONA_AIF2TX3_ENA_WIDTH                     1  /* AIF2TX3_ENA */
 #define ARIZONA_AIF2TX2_ENA                      0x0002  /* AIF2TX2_ENA */
 #define ARIZONA_AIF2TX2_ENA_MASK                 0x0002  /* AIF2TX2_ENA */
 #define ARIZONA_AIF2TX2_ENA_SHIFT                     1  /* AIF2TX2_ENA */
@@ -3754,6 +3927,22 @@
 /*
  * R1370 (0x55A) - AIF2 Rx Enables
  */
+#define ARIZONA_AIF2RX6_ENA                      0x0020  /* AIF2RX6_ENA */
+#define ARIZONA_AIF2RX6_ENA_MASK                 0x0020  /* AIF2RX6_ENA */
+#define ARIZONA_AIF2RX6_ENA_SHIFT                     5  /* AIF2RX6_ENA */
+#define ARIZONA_AIF2RX6_ENA_WIDTH                     1  /* AIF2RX6_ENA */
+#define ARIZONA_AIF2RX5_ENA                      0x0010  /* AIF2RX5_ENA */
+#define ARIZONA_AIF2RX5_ENA_MASK                 0x0010  /* AIF2RX5_ENA */
+#define ARIZONA_AIF2RX5_ENA_SHIFT                     4  /* AIF2RX5_ENA */
+#define ARIZONA_AIF2RX5_ENA_WIDTH                     1  /* AIF2RX5_ENA */
+#define ARIZONA_AIF2RX4_ENA                      0x0008  /* AIF2RX4_ENA */
+#define ARIZONA_AIF2RX4_ENA_MASK                 0x0008  /* AIF2RX4_ENA */
+#define ARIZONA_AIF2RX4_ENA_SHIFT                     3  /* AIF2RX4_ENA */
+#define ARIZONA_AIF2RX4_ENA_WIDTH                     1  /* AIF2RX4_ENA */
+#define ARIZONA_AIF2RX3_ENA                      0x0004  /* AIF2RX3_ENA */
+#define ARIZONA_AIF2RX3_ENA_MASK                 0x0004  /* AIF2RX3_ENA */
+#define ARIZONA_AIF2RX3_ENA_SHIFT                     2  /* AIF2RX3_ENA */
+#define ARIZONA_AIF2RX3_ENA_WIDTH                     1  /* AIF2RX3_ENA */
 #define ARIZONA_AIF2RX2_ENA                      0x0002  /* AIF2RX2_ENA */
 #define ARIZONA_AIF2RX2_ENA_MASK                 0x0002  /* AIF2RX2_ENA */
 #define ARIZONA_AIF2RX2_ENA_SHIFT                     1  /* AIF2RX2_ENA */

include/linux/platform_data/asoc-ti-mcbsp.h

@@ -1,6 +1,4 @@
 /*
- * arch/arm/plat-omap/include/mach/mcbsp.h
- *
  * Defines for Multi-Channel Buffered Serial Port
  *
  * Copyright (C) 2002 RidgeRun, Inc.
@@ -21,8 +19,8 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  *
  */
-#ifndef __ASM_ARCH_OMAP_MCBSP_H
+#ifndef __ASOC_TI_MCBSP_H
-#define __ASM_ARCH_OMAP_MCBSP_H
+#define __ASOC_TI_MCBSP_H
 
 #include <linux/spinlock.h>
 #include <linux/clk.h>

include/linux/platform_data/asoc-ux500-msp.h

@@ -10,16 +10,9 @@
 
 #include <linux/platform_data/dma-ste-dma40.h>
 
-enum msp_i2s_id {
-	MSP_I2S_0 = 0,
-	MSP_I2S_1,
-	MSP_I2S_2,
-	MSP_I2S_3,
-};
-
 /* Platform data structure for a MSP I2S-device */
 struct msp_i2s_platform_data {
-	enum msp_i2s_id id;
+	int id;
 	struct stedma40_chan_cfg *msp_i2s_dma_rx;
 	struct stedma40_chan_cfg *msp_i2s_dma_tx;
 };

include/linux/platform_data/davinci_asp.h

@@ -92,6 +92,7 @@ enum {
 	MCASP_VERSION_1 = 0,	/* DM646x */
 	MCASP_VERSION_2,	/* DA8xx/OMAPL1x */
 	MCASP_VERSION_3,        /* TI81xx/AM33xx */
+	MCASP_VERSION_4,	/* DRA7xxx */
 };
 
 enum mcbsp_clk_input_pin {

include/sound/cs42l52.h

@@ -16,17 +16,11 @@ struct cs42l52_platform_data {
 	/* MICBIAS Level. Check datasheet Pg48 */
 	unsigned int micbias_lvl;
 
-	/* MICA mode selection 0=Single 1=Differential */
+	/* MICA mode selection Differential or Single-ended */
-	unsigned int mica_cfg;
+	bool mica_diff_cfg;
 
-	/* MICB mode selection 0=Single 1=Differential */
+	/* MICB mode selection Differential or Single-ended */
-	unsigned int micb_cfg;
+	bool micb_diff_cfg;
-
-	/* MICA Select 0=MIC1A 1=MIC2A */
-	unsigned int mica_sel;
-
-	/* MICB Select 0=MIC2A 1=MIC2B */
-	unsigned int micb_sel;
 
 	/* Charge Pump Freq. Check datasheet Pg73 */
 	unsigned int chgfreq;

include/sound/dmaengine_pcm.h

@@ -114,6 +114,10 @@ void snd_dmaengine_pcm_set_config_from_dai_data(
  * @compat_filter_fn: Will be used as the filter function when requesting a
  *  channel for platforms which do not use devicetree. The filter parameter
  *  will be the DAI's DMA data.
+ * @dma_dev: If set, request DMA channel on this device rather than the DAI
+ *  device.
+ * @chan_names: If set, these custom DMA channel names will be requested at
+ *  registration time.
  * @pcm_hardware: snd_pcm_hardware struct to be used for the PCM.
  * @prealloc_buffer_size: Size of the preallocated audio buffer.
  *
@@ -130,6 +134,8 @@ struct snd_dmaengine_pcm_config {
 			struct snd_soc_pcm_runtime *rtd,
 			struct snd_pcm_substream *substream);
 	dma_filter_fn compat_filter_fn;
+	struct device *dma_dev;
+	const char *chan_names[SNDRV_PCM_STREAM_LAST + 1];
 
 	const struct snd_pcm_hardware *pcm_hardware;
 	unsigned int prealloc_buffer_size;
@@ -140,6 +146,10 @@ int snd_dmaengine_pcm_register(struct device *dev,
 	unsigned int flags);
 void snd_dmaengine_pcm_unregister(struct device *dev);
 
+int devm_snd_dmaengine_pcm_register(struct device *dev,
+	const struct snd_dmaengine_pcm_config *config,
+	unsigned int flags);
+
 int snd_dmaengine_pcm_prepare_slave_config(struct snd_pcm_substream *substream,
 	struct snd_pcm_hw_params *params,
 	struct dma_slave_config *slave_config);

include/sound/hda_verbs.h

@@ -0,0 +1,554 @@
+/*
+ * HD-audio codec verbs
+ */
+
+#ifndef __SOUND_HDA_VERBS_H
+#define __SOUND_HDA_VERBS_H
+
+/*
+ * nodes
+ */
+#define	AC_NODE_ROOT		0x00
+
+/*
+ * function group types
+ */
+enum {
+	AC_GRP_AUDIO_FUNCTION = 0x01,
+	AC_GRP_MODEM_FUNCTION = 0x02,
+};
+
+/*
+ * widget types
+ */
+enum {
+	AC_WID_AUD_OUT,		/* Audio Out */
+	AC_WID_AUD_IN,		/* Audio In */
+	AC_WID_AUD_MIX,		/* Audio Mixer */
+	AC_WID_AUD_SEL,		/* Audio Selector */
+	AC_WID_PIN,		/* Pin Complex */
+	AC_WID_POWER,		/* Power */
+	AC_WID_VOL_KNB,		/* Volume Knob */
+	AC_WID_BEEP,		/* Beep Generator */
+	AC_WID_VENDOR = 0x0f	/* Vendor specific */
+};
+
+/*
+ * GET verbs
+ */
+#define AC_VERB_GET_STREAM_FORMAT		0x0a00
+#define AC_VERB_GET_AMP_GAIN_MUTE		0x0b00
+#define AC_VERB_GET_PROC_COEF			0x0c00
+#define AC_VERB_GET_COEF_INDEX			0x0d00
+#define AC_VERB_PARAMETERS			0x0f00
+#define AC_VERB_GET_CONNECT_SEL			0x0f01
+#define AC_VERB_GET_CONNECT_LIST		0x0f02
+#define AC_VERB_GET_PROC_STATE			0x0f03
+#define AC_VERB_GET_SDI_SELECT			0x0f04
+#define AC_VERB_GET_POWER_STATE			0x0f05
+#define AC_VERB_GET_CONV			0x0f06
+#define AC_VERB_GET_PIN_WIDGET_CONTROL		0x0f07
+#define AC_VERB_GET_UNSOLICITED_RESPONSE	0x0f08
+#define AC_VERB_GET_PIN_SENSE			0x0f09
+#define AC_VERB_GET_BEEP_CONTROL		0x0f0a
+#define AC_VERB_GET_EAPD_BTLENABLE		0x0f0c
+#define AC_VERB_GET_DIGI_CONVERT_1		0x0f0d
+#define AC_VERB_GET_DIGI_CONVERT_2		0x0f0e /* unused */
+#define AC_VERB_GET_VOLUME_KNOB_CONTROL		0x0f0f
+/* f10-f1a: GPIO */
+#define AC_VERB_GET_GPIO_DATA			0x0f15
+#define AC_VERB_GET_GPIO_MASK			0x0f16
+#define AC_VERB_GET_GPIO_DIRECTION		0x0f17
+#define AC_VERB_GET_GPIO_WAKE_MASK		0x0f18
+#define AC_VERB_GET_GPIO_UNSOLICITED_RSP_MASK	0x0f19
+#define AC_VERB_GET_GPIO_STICKY_MASK		0x0f1a
+#define AC_VERB_GET_CONFIG_DEFAULT		0x0f1c
+/* f20: AFG/MFG */
+#define AC_VERB_GET_SUBSYSTEM_ID		0x0f20
+#define AC_VERB_GET_CVT_CHAN_COUNT		0x0f2d
+#define AC_VERB_GET_HDMI_DIP_SIZE		0x0f2e
+#define AC_VERB_GET_HDMI_ELDD			0x0f2f
+#define AC_VERB_GET_HDMI_DIP_INDEX		0x0f30
+#define AC_VERB_GET_HDMI_DIP_DATA		0x0f31
+#define AC_VERB_GET_HDMI_DIP_XMIT		0x0f32
+#define AC_VERB_GET_HDMI_CP_CTRL		0x0f33
+#define AC_VERB_GET_HDMI_CHAN_SLOT		0x0f34
+#define AC_VERB_GET_DEVICE_SEL			0xf35
+#define AC_VERB_GET_DEVICE_LIST			0xf36
+
+/*
+ * SET verbs
+ */
+#define AC_VERB_SET_STREAM_FORMAT		0x200
+#define AC_VERB_SET_AMP_GAIN_MUTE		0x300
+#define AC_VERB_SET_PROC_COEF			0x400
+#define AC_VERB_SET_COEF_INDEX			0x500
+#define AC_VERB_SET_CONNECT_SEL			0x701
+#define AC_VERB_SET_PROC_STATE			0x703
+#define AC_VERB_SET_SDI_SELECT			0x704
+#define AC_VERB_SET_POWER_STATE			0x705
+#define AC_VERB_SET_CHANNEL_STREAMID		0x706
+#define AC_VERB_SET_PIN_WIDGET_CONTROL		0x707
+#define AC_VERB_SET_UNSOLICITED_ENABLE		0x708
+#define AC_VERB_SET_PIN_SENSE			0x709
+#define AC_VERB_SET_BEEP_CONTROL		0x70a
+#define AC_VERB_SET_EAPD_BTLENABLE		0x70c
+#define AC_VERB_SET_DIGI_CONVERT_1		0x70d
+#define AC_VERB_SET_DIGI_CONVERT_2		0x70e
+#define AC_VERB_SET_VOLUME_KNOB_CONTROL		0x70f
+#define AC_VERB_SET_GPIO_DATA			0x715
+#define AC_VERB_SET_GPIO_MASK			0x716
+#define AC_VERB_SET_GPIO_DIRECTION		0x717
+#define AC_VERB_SET_GPIO_WAKE_MASK		0x718
+#define AC_VERB_SET_GPIO_UNSOLICITED_RSP_MASK	0x719
+#define AC_VERB_SET_GPIO_STICKY_MASK		0x71a
+#define AC_VERB_SET_CONFIG_DEFAULT_BYTES_0	0x71c
+#define AC_VERB_SET_CONFIG_DEFAULT_BYTES_1	0x71d
+#define AC_VERB_SET_CONFIG_DEFAULT_BYTES_2	0x71e
+#define AC_VERB_SET_CONFIG_DEFAULT_BYTES_3	0x71f
+#define AC_VERB_SET_EAPD				0x788
+#define AC_VERB_SET_CODEC_RESET			0x7ff
+#define AC_VERB_SET_CVT_CHAN_COUNT		0x72d
+#define AC_VERB_SET_HDMI_DIP_INDEX		0x730
+#define AC_VERB_SET_HDMI_DIP_DATA		0x731
+#define AC_VERB_SET_HDMI_DIP_XMIT		0x732
+#define AC_VERB_SET_HDMI_CP_CTRL		0x733
+#define AC_VERB_SET_HDMI_CHAN_SLOT		0x734
+#define AC_VERB_SET_DEVICE_SEL			0x735
+
+/*
+ * Parameter IDs
+ */
+#define AC_PAR_VENDOR_ID		0x00
+#define AC_PAR_SUBSYSTEM_ID		0x01
+#define AC_PAR_REV_ID			0x02
+#define AC_PAR_NODE_COUNT		0x04
+#define AC_PAR_FUNCTION_TYPE		0x05
+#define AC_PAR_AUDIO_FG_CAP		0x08
+#define AC_PAR_AUDIO_WIDGET_CAP		0x09
+#define AC_PAR_PCM			0x0a
+#define AC_PAR_STREAM			0x0b
+#define AC_PAR_PIN_CAP			0x0c
+#define AC_PAR_AMP_IN_CAP		0x0d
+#define AC_PAR_CONNLIST_LEN		0x0e
+#define AC_PAR_POWER_STATE		0x0f
+#define AC_PAR_PROC_CAP			0x10
+#define AC_PAR_GPIO_CAP			0x11
+#define AC_PAR_AMP_OUT_CAP		0x12
+#define AC_PAR_VOL_KNB_CAP		0x13
+#define AC_PAR_DEVLIST_LEN		0x15
+#define AC_PAR_HDMI_LPCM_CAP		0x20
+
+/*
+ * AC_VERB_PARAMETERS results (32bit)
+ */
+
+/* Function Group Type */
+#define AC_FGT_TYPE			(0xff<<0)
+#define AC_FGT_TYPE_SHIFT		0
+#define AC_FGT_UNSOL_CAP		(1<<8)
+
+/* Audio Function Group Capabilities */
+#define AC_AFG_OUT_DELAY		(0xf<<0)
+#define AC_AFG_IN_DELAY			(0xf<<8)
+#define AC_AFG_BEEP_GEN			(1<<16)
+
+/* Audio Widget Capabilities */
+#define AC_WCAP_STEREO			(1<<0)	/* stereo I/O */
+#define AC_WCAP_IN_AMP			(1<<1)	/* AMP-in present */
+#define AC_WCAP_OUT_AMP			(1<<2)	/* AMP-out present */
+#define AC_WCAP_AMP_OVRD		(1<<3)	/* AMP-parameter override */
+#define AC_WCAP_FORMAT_OVRD		(1<<4)	/* format override */
+#define AC_WCAP_STRIPE			(1<<5)	/* stripe */
+#define AC_WCAP_PROC_WID		(1<<6)	/* Proc Widget */
+#define AC_WCAP_UNSOL_CAP		(1<<7)	/* Unsol capable */
+#define AC_WCAP_CONN_LIST		(1<<8)	/* connection list */
+#define AC_WCAP_DIGITAL			(1<<9)	/* digital I/O */
+#define AC_WCAP_POWER			(1<<10)	/* power control */
+#define AC_WCAP_LR_SWAP			(1<<11)	/* L/R swap */
+#define AC_WCAP_CP_CAPS			(1<<12) /* content protection */
+#define AC_WCAP_CHAN_CNT_EXT		(7<<13)	/* channel count ext */
+#define AC_WCAP_DELAY			(0xf<<16)
+#define AC_WCAP_DELAY_SHIFT		16
+#define AC_WCAP_TYPE			(0xf<<20)
+#define AC_WCAP_TYPE_SHIFT		20
+
+/* supported PCM rates and bits */
+#define AC_SUPPCM_RATES			(0xfff << 0)
+#define AC_SUPPCM_BITS_8		(1<<16)
+#define AC_SUPPCM_BITS_16		(1<<17)
+#define AC_SUPPCM_BITS_20		(1<<18)
+#define AC_SUPPCM_BITS_24		(1<<19)
+#define AC_SUPPCM_BITS_32		(1<<20)
+
+/* supported PCM stream format */
+#define AC_SUPFMT_PCM			(1<<0)
+#define AC_SUPFMT_FLOAT32		(1<<1)
+#define AC_SUPFMT_AC3			(1<<2)
+
+/* GP I/O count */
+#define AC_GPIO_IO_COUNT		(0xff<<0)
+#define AC_GPIO_O_COUNT			(0xff<<8)
+#define AC_GPIO_O_COUNT_SHIFT		8
+#define AC_GPIO_I_COUNT			(0xff<<16)
+#define AC_GPIO_I_COUNT_SHIFT		16
+#define AC_GPIO_UNSOLICITED		(1<<30)
+#define AC_GPIO_WAKE			(1<<31)
+
+/* Converter stream, channel */
+#define AC_CONV_CHANNEL			(0xf<<0)
+#define AC_CONV_STREAM			(0xf<<4)
+#define AC_CONV_STREAM_SHIFT		4
+
+/* Input converter SDI select */
+#define AC_SDI_SELECT			(0xf<<0)
+
+/* stream format id */
+#define AC_FMT_CHAN_SHIFT		0
+#define AC_FMT_CHAN_MASK		(0x0f << 0)
+#define AC_FMT_BITS_SHIFT		4
+#define AC_FMT_BITS_MASK		(7 << 4)
+#define AC_FMT_BITS_8			(0 << 4)
+#define AC_FMT_BITS_16			(1 << 4)
+#define AC_FMT_BITS_20			(2 << 4)
+#define AC_FMT_BITS_24			(3 << 4)
+#define AC_FMT_BITS_32			(4 << 4)
+#define AC_FMT_DIV_SHIFT		8
+#define AC_FMT_DIV_MASK			(7 << 8)
+#define AC_FMT_MULT_SHIFT		11
+#define AC_FMT_MULT_MASK		(7 << 11)
+#define AC_FMT_BASE_SHIFT		14
+#define AC_FMT_BASE_48K			(0 << 14)
+#define AC_FMT_BASE_44K			(1 << 14)
+#define AC_FMT_TYPE_SHIFT		15
+#define AC_FMT_TYPE_PCM			(0 << 15)
+#define AC_FMT_TYPE_NON_PCM		(1 << 15)
+
+/* Unsolicited response control */
+#define AC_UNSOL_TAG			(0x3f<<0)
+#define AC_UNSOL_ENABLED		(1<<7)
+#define AC_USRSP_EN			AC_UNSOL_ENABLED
+
+/* Unsolicited responses */
+#define AC_UNSOL_RES_TAG		(0x3f<<26)
+#define AC_UNSOL_RES_TAG_SHIFT		26
+#define AC_UNSOL_RES_SUBTAG		(0x1f<<21)
+#define AC_UNSOL_RES_SUBTAG_SHIFT	21
+#define AC_UNSOL_RES_DE			(0x3f<<15)  /* Device Entry
+						     * (for DP1.2 MST)
+						     */
+#define AC_UNSOL_RES_DE_SHIFT		15
+#define AC_UNSOL_RES_IA			(1<<2)	/* Inactive (for DP1.2 MST) */
+#define AC_UNSOL_RES_ELDV		(1<<1)	/* ELD Data valid (for HDMI) */
+#define AC_UNSOL_RES_PD			(1<<0)	/* pinsense detect */
+#define AC_UNSOL_RES_CP_STATE		(1<<1)	/* content protection */
+#define AC_UNSOL_RES_CP_READY		(1<<0)	/* content protection */
+
+/* Pin widget capabilies */
+#define AC_PINCAP_IMP_SENSE		(1<<0)	/* impedance sense capable */
+#define AC_PINCAP_TRIG_REQ		(1<<1)	/* trigger required */
+#define AC_PINCAP_PRES_DETECT		(1<<2)	/* presence detect capable */
+#define AC_PINCAP_HP_DRV		(1<<3)	/* headphone drive capable */
+#define AC_PINCAP_OUT			(1<<4)	/* output capable */
+#define AC_PINCAP_IN			(1<<5)	/* input capable */
+#define AC_PINCAP_BALANCE		(1<<6)	/* balanced I/O capable */
+/* Note: This LR_SWAP pincap is defined in the Realtek ALC883 specification,
+ *       but is marked reserved in the Intel HDA specification.
+ */
+#define AC_PINCAP_LR_SWAP		(1<<7)	/* L/R swap */
+/* Note: The same bit as LR_SWAP is newly defined as HDMI capability
+ *       in HD-audio specification
+ */
+#define AC_PINCAP_HDMI			(1<<7)	/* HDMI pin */
+#define AC_PINCAP_DP			(1<<24)	/* DisplayPort pin, can
+						 * coexist with AC_PINCAP_HDMI
+						 */
+#define AC_PINCAP_VREF			(0x37<<8)
+#define AC_PINCAP_VREF_SHIFT		8
+#define AC_PINCAP_EAPD			(1<<16)	/* EAPD capable */
+#define AC_PINCAP_HBR			(1<<27)	/* High Bit Rate */
+/* Vref status (used in pin cap) */
+#define AC_PINCAP_VREF_HIZ		(1<<0)	/* Hi-Z */
+#define AC_PINCAP_VREF_50		(1<<1)	/* 50% */
+#define AC_PINCAP_VREF_GRD		(1<<2)	/* ground */
+#define AC_PINCAP_VREF_80		(1<<4)	/* 80% */
+#define AC_PINCAP_VREF_100		(1<<5)	/* 100% */
+
+/* Amplifier capabilities */
+#define AC_AMPCAP_OFFSET		(0x7f<<0)  /* 0dB offset */
+#define AC_AMPCAP_OFFSET_SHIFT		0
+#define AC_AMPCAP_NUM_STEPS		(0x7f<<8)  /* number of steps */
+#define AC_AMPCAP_NUM_STEPS_SHIFT	8
+#define AC_AMPCAP_STEP_SIZE		(0x7f<<16) /* step size 0-32dB
+						    * in 0.25dB
+						    */
+#define AC_AMPCAP_STEP_SIZE_SHIFT	16
+#define AC_AMPCAP_MUTE			(1<<31)    /* mute capable */
+#define AC_AMPCAP_MUTE_SHIFT		31
+
+/* driver-specific amp-caps: using bits 24-30 */
+#define AC_AMPCAP_MIN_MUTE		(1 << 30) /* min-volume = mute */
+
+/* Connection list */
+#define AC_CLIST_LENGTH			(0x7f<<0)
+#define AC_CLIST_LONG			(1<<7)
+
+/* Supported power status */
+#define AC_PWRST_D0SUP			(1<<0)
+#define AC_PWRST_D1SUP			(1<<1)
+#define AC_PWRST_D2SUP			(1<<2)
+#define AC_PWRST_D3SUP			(1<<3)
+#define AC_PWRST_D3COLDSUP		(1<<4)
+#define AC_PWRST_S3D3COLDSUP		(1<<29)
+#define AC_PWRST_CLKSTOP		(1<<30)
+#define AC_PWRST_EPSS			(1U<<31)
+
+/* Power state values */
+#define AC_PWRST_SETTING		(0xf<<0)
+#define AC_PWRST_ACTUAL			(0xf<<4)
+#define AC_PWRST_ACTUAL_SHIFT		4
+#define AC_PWRST_D0			0x00
+#define AC_PWRST_D1			0x01
+#define AC_PWRST_D2			0x02
+#define AC_PWRST_D3			0x03
+#define AC_PWRST_ERROR                  (1<<8)
+#define AC_PWRST_CLK_STOP_OK            (1<<9)
+#define AC_PWRST_SETTING_RESET          (1<<10)
+
+/* Processing capabilies */
+#define AC_PCAP_BENIGN			(1<<0)
+#define AC_PCAP_NUM_COEF		(0xff<<8)
+#define AC_PCAP_NUM_COEF_SHIFT		8
+
+/* Volume knobs capabilities */
+#define AC_KNBCAP_NUM_STEPS		(0x7f<<0)
+#define AC_KNBCAP_DELTA			(1<<7)
+
+/* HDMI LPCM capabilities */
+#define AC_LPCMCAP_48K_CP_CHNS		(0x0f<<0) /* max channels w/ CP-on */
+#define AC_LPCMCAP_48K_NO_CHNS		(0x0f<<4) /* max channels w/o CP-on */
+#define AC_LPCMCAP_48K_20BIT		(1<<8)	/* 20b bitrate supported */
+#define AC_LPCMCAP_48K_24BIT		(1<<9)	/* 24b bitrate supported */
+#define AC_LPCMCAP_96K_CP_CHNS		(0x0f<<10) /* max channels w/ CP-on */
+#define AC_LPCMCAP_96K_NO_CHNS		(0x0f<<14) /* max channels w/o CP-on */
+#define AC_LPCMCAP_96K_20BIT		(1<<18)	/* 20b bitrate supported */
+#define AC_LPCMCAP_96K_24BIT		(1<<19)	/* 24b bitrate supported */
+#define AC_LPCMCAP_192K_CP_CHNS		(0x0f<<20) /* max channels w/ CP-on */
+#define AC_LPCMCAP_192K_NO_CHNS		(0x0f<<24) /* max channels w/o CP-on */
+#define AC_LPCMCAP_192K_20BIT		(1<<28)	/* 20b bitrate supported */
+#define AC_LPCMCAP_192K_24BIT		(1<<29)	/* 24b bitrate supported */
+#define AC_LPCMCAP_44K			(1<<30)	/* 44.1kHz support */
+#define AC_LPCMCAP_44K_MS		(1<<31)	/* 44.1kHz-multiplies support */
+
+/* Display pin's device list length */
+#define AC_DEV_LIST_LEN_MASK		0x3f
+#define AC_MAX_DEV_LIST_LEN		64
+
+/*
+ * Control Parameters
+ */
+
+/* Amp gain/mute */
+#define AC_AMP_MUTE			(1<<7)
+#define AC_AMP_GAIN			(0x7f)
+#define AC_AMP_GET_INDEX		(0xf<<0)
+
+#define AC_AMP_GET_LEFT			(1<<13)
+#define AC_AMP_GET_RIGHT		(0<<13)
+#define AC_AMP_GET_OUTPUT		(1<<15)
+#define AC_AMP_GET_INPUT		(0<<15)
+
+#define AC_AMP_SET_INDEX		(0xf<<8)
+#define AC_AMP_SET_INDEX_SHIFT		8
+#define AC_AMP_SET_RIGHT		(1<<12)
+#define AC_AMP_SET_LEFT			(1<<13)
+#define AC_AMP_SET_INPUT		(1<<14)
+#define AC_AMP_SET_OUTPUT		(1<<15)
+
+/* DIGITAL1 bits */
+#define AC_DIG1_ENABLE			(1<<0)
+#define AC_DIG1_V			(1<<1)
+#define AC_DIG1_VCFG			(1<<2)
+#define AC_DIG1_EMPHASIS		(1<<3)
+#define AC_DIG1_COPYRIGHT		(1<<4)
+#define AC_DIG1_NONAUDIO		(1<<5)
+#define AC_DIG1_PROFESSIONAL		(1<<6)
+#define AC_DIG1_LEVEL			(1<<7)
+
+/* DIGITAL2 bits */
+#define AC_DIG2_CC			(0x7f<<0)
+
+/* DIGITAL3 bits */
+#define AC_DIG3_ICT			(0xf<<0)
+#define AC_DIG3_KAE			(1<<7)
+
+/* Pin widget control - 8bit */
+#define AC_PINCTL_EPT			(0x3<<0)
+#define AC_PINCTL_EPT_NATIVE		0
+#define AC_PINCTL_EPT_HBR		3
+#define AC_PINCTL_VREFEN		(0x7<<0)
+#define AC_PINCTL_VREF_HIZ		0	/* Hi-Z */
+#define AC_PINCTL_VREF_50		1	/* 50% */
+#define AC_PINCTL_VREF_GRD		2	/* ground */
+#define AC_PINCTL_VREF_80		4	/* 80% */
+#define AC_PINCTL_VREF_100		5	/* 100% */
+#define AC_PINCTL_IN_EN			(1<<5)
+#define AC_PINCTL_OUT_EN		(1<<6)
+#define AC_PINCTL_HP_EN			(1<<7)
+
+/* Pin sense - 32bit */
+#define AC_PINSENSE_IMPEDANCE_MASK	(0x7fffffff)
+#define AC_PINSENSE_PRESENCE		(1<<31)
+#define AC_PINSENSE_ELDV		(1<<30)	/* ELD valid (HDMI) */
+
+/* EAPD/BTL enable - 32bit */
+#define AC_EAPDBTL_BALANCED		(1<<0)
+#define AC_EAPDBTL_EAPD			(1<<1)
+#define AC_EAPDBTL_LR_SWAP		(1<<2)
+
+/* HDMI ELD data */
+#define AC_ELDD_ELD_VALID		(1<<31)
+#define AC_ELDD_ELD_DATA		0xff
+
+/* HDMI DIP size */
+#define AC_DIPSIZE_ELD_BUF		(1<<3) /* ELD buf size of packet size */
+#define AC_DIPSIZE_PACK_IDX		(0x07<<0) /* packet index */
+
+/* HDMI DIP index */
+#define AC_DIPIDX_PACK_IDX		(0x07<<5) /* packet idnex */
+#define AC_DIPIDX_BYTE_IDX		(0x1f<<0) /* byte index */
+
+/* HDMI DIP xmit (transmit) control */
+#define AC_DIPXMIT_MASK			(0x3<<6)
+#define AC_DIPXMIT_DISABLE		(0x0<<6) /* disable xmit */
+#define AC_DIPXMIT_ONCE			(0x2<<6) /* xmit once then disable */
+#define AC_DIPXMIT_BEST			(0x3<<6) /* best effort */
+
+/* HDMI content protection (CP) control */
+#define AC_CPCTRL_CES			(1<<9) /* current encryption state */
+#define AC_CPCTRL_READY			(1<<8) /* ready bit */
+#define AC_CPCTRL_SUBTAG		(0x1f<<3) /* subtag for unsol-resp */
+#define AC_CPCTRL_STATE			(3<<0) /* current CP request state */
+
+/* Converter channel <-> HDMI slot mapping */
+#define AC_CVTMAP_HDMI_SLOT		(0xf<<0) /* HDMI slot number */
+#define AC_CVTMAP_CHAN			(0xf<<4) /* converter channel number */
+
+/* configuration default - 32bit */
+#define AC_DEFCFG_SEQUENCE		(0xf<<0)
+#define AC_DEFCFG_DEF_ASSOC		(0xf<<4)
+#define AC_DEFCFG_ASSOC_SHIFT		4
+#define AC_DEFCFG_MISC			(0xf<<8)
+#define AC_DEFCFG_MISC_SHIFT		8
+#define AC_DEFCFG_MISC_NO_PRESENCE	(1<<0)
+#define AC_DEFCFG_COLOR			(0xf<<12)
+#define AC_DEFCFG_COLOR_SHIFT		12
+#define AC_DEFCFG_CONN_TYPE		(0xf<<16)
+#define AC_DEFCFG_CONN_TYPE_SHIFT	16
+#define AC_DEFCFG_DEVICE		(0xf<<20)
+#define AC_DEFCFG_DEVICE_SHIFT		20
+#define AC_DEFCFG_LOCATION		(0x3f<<24)
+#define AC_DEFCFG_LOCATION_SHIFT	24
+#define AC_DEFCFG_PORT_CONN		(0x3<<30)
+#define AC_DEFCFG_PORT_CONN_SHIFT	30
+
+/* Display pin's device list entry */
+#define AC_DE_PD			(1<<0)
+#define AC_DE_ELDV			(1<<1)
+#define AC_DE_IA			(1<<2)
+
+/* device device types (0x0-0xf) */
+enum {
+	AC_JACK_LINE_OUT,
+	AC_JACK_SPEAKER,
+	AC_JACK_HP_OUT,
+	AC_JACK_CD,
+	AC_JACK_SPDIF_OUT,
+	AC_JACK_DIG_OTHER_OUT,
+	AC_JACK_MODEM_LINE_SIDE,
+	AC_JACK_MODEM_HAND_SIDE,
+	AC_JACK_LINE_IN,
+	AC_JACK_AUX,
+	AC_JACK_MIC_IN,
+	AC_JACK_TELEPHONY,
+	AC_JACK_SPDIF_IN,
+	AC_JACK_DIG_OTHER_IN,
+	AC_JACK_OTHER = 0xf,
+};
+
+/* jack connection types (0x0-0xf) */
+enum {
+	AC_JACK_CONN_UNKNOWN,
+	AC_JACK_CONN_1_8,
+	AC_JACK_CONN_1_4,
+	AC_JACK_CONN_ATAPI,
+	AC_JACK_CONN_RCA,
+	AC_JACK_CONN_OPTICAL,
+	AC_JACK_CONN_OTHER_DIGITAL,
+	AC_JACK_CONN_OTHER_ANALOG,
+	AC_JACK_CONN_DIN,
+	AC_JACK_CONN_XLR,
+	AC_JACK_CONN_RJ11,
+	AC_JACK_CONN_COMB,
+	AC_JACK_CONN_OTHER = 0xf,
+};
+
+/* jack colors (0x0-0xf) */
+enum {
+	AC_JACK_COLOR_UNKNOWN,
+	AC_JACK_COLOR_BLACK,
+	AC_JACK_COLOR_GREY,
+	AC_JACK_COLOR_BLUE,
+	AC_JACK_COLOR_GREEN,
+	AC_JACK_COLOR_RED,
+	AC_JACK_COLOR_ORANGE,
+	AC_JACK_COLOR_YELLOW,
+	AC_JACK_COLOR_PURPLE,
+	AC_JACK_COLOR_PINK,
+	AC_JACK_COLOR_WHITE = 0xe,
+	AC_JACK_COLOR_OTHER,
+};
+
+/* Jack location (0x0-0x3f) */
+/* common case */
+enum {
+	AC_JACK_LOC_NONE,
+	AC_JACK_LOC_REAR,
+	AC_JACK_LOC_FRONT,
+	AC_JACK_LOC_LEFT,
+	AC_JACK_LOC_RIGHT,
+	AC_JACK_LOC_TOP,
+	AC_JACK_LOC_BOTTOM,
+};
+/* bits 4-5 */
+enum {
+	AC_JACK_LOC_EXTERNAL = 0x00,
+	AC_JACK_LOC_INTERNAL = 0x10,
+	AC_JACK_LOC_SEPARATE = 0x20,
+	AC_JACK_LOC_OTHER    = 0x30,
+};
+enum {
+	/* external on primary chasis */
+	AC_JACK_LOC_REAR_PANEL = 0x07,
+	AC_JACK_LOC_DRIVE_BAY,
+	/* internal */
+	AC_JACK_LOC_RISER = 0x17,
+	AC_JACK_LOC_HDMI,
+	AC_JACK_LOC_ATAPI,
+	/* others */
+	AC_JACK_LOC_MOBILE_IN = 0x37,
+	AC_JACK_LOC_MOBILE_OUT,
+};
+
+/* Port connectivity (0-3) */
+enum {
+	AC_JACK_PORT_COMPLEX,
+	AC_JACK_PORT_NONE,
+	AC_JACK_PORT_FIXED,
+	AC_JACK_PORT_BOTH,
+};
+
+/* max. codec address */
+#define HDA_MAX_CODEC_ADDRESS	0x0f
+
+#endif /* __SOUND_HDA_VERBS_H */

include/sound/memalloc.h

@@ -149,13 +149,6 @@ int snd_dma_alloc_pages_fallback(int type, struct device *dev, size_t size,
                                  struct snd_dma_buffer *dmab);
 void snd_dma_free_pages(struct snd_dma_buffer *dmab);
 
-/* buffer-preservation managements */
-
-#define snd_dma_pci_buf_id(pci)	(((unsigned int)(pci)->vendor << 16) | (pci)->device)
-
-size_t snd_dma_get_reserved_buf(struct snd_dma_buffer *dmab, unsigned int id);
-int snd_dma_reserve_buf(struct snd_dma_buffer *dmab, unsigned int id);
-
 /* basic memory allocation functions */
 void *snd_malloc_pages(size_t size, gfp_t gfp_flags);
 void snd_free_pages(void *ptr, size_t size);

include/sound/pcm.h

@@ -381,7 +381,6 @@ struct snd_pcm_substream {
 	struct pm_qos_request latency_pm_qos_req; /* pm_qos request */
 	size_t buffer_bytes_max;	/* limit ring buffer size */
 	struct snd_dma_buffer dma_buffer;
-	unsigned int dma_buf_id;
 	size_t dma_max;
 	/* -- hardware operations -- */
 	const struct snd_pcm_ops *ops;
@@ -901,6 +900,8 @@ extern const struct snd_pcm_hw_constraint_list snd_pcm_known_rates;
 int snd_pcm_limit_hw_rates(struct snd_pcm_runtime *runtime);
 unsigned int snd_pcm_rate_to_rate_bit(unsigned int rate);
 unsigned int snd_pcm_rate_bit_to_rate(unsigned int rate_bit);
+unsigned int snd_pcm_rate_mask_intersect(unsigned int rates_a,
+					 unsigned int rates_b);
 
 static inline void snd_pcm_set_runtime_buffer(struct snd_pcm_substream *substream,
 					      struct snd_dma_buffer *bufp)

include/sound/pcm_params.h

@@ -354,4 +354,16 @@ params_period_bytes(const struct snd_pcm_hw_params *p)
 		params_channels(p)) / 8;
 }
 
+static inline int
+params_width(const struct snd_pcm_hw_params *p)
+{
+	return snd_pcm_format_width(params_format(p));
+}
+
+static inline int
+params_physical_width(const struct snd_pcm_hw_params *p)
+{
+	return snd_pcm_format_physical_width(params_format(p));
+}
+
 #endif /* __SOUND_PCM_PARAMS_H */

include/sound/rcar_snd.h

@@ -18,7 +18,7 @@
 #define RSND_GEN1_ADG	1
 #define RSND_GEN1_SSI	2
 
-#define RSND_GEN2_SRU	0
+#define RSND_GEN2_SCU	0
 #define RSND_GEN2_ADG	1
 #define RSND_GEN2_SSIU	2
 #define RSND_GEN2_SSI	3
@@ -58,6 +58,7 @@ struct rsnd_ssi_platform_info {
 
 struct rsnd_scu_platform_info {
 	u32 flags;
+	u32 convert_rate; /* sampling rate convert */
 };
 
 /*

include/sound/soc-dai.h

@@ -123,6 +123,8 @@ int snd_soc_dai_set_tristate(struct snd_soc_dai *dai, int tristate);
 int snd_soc_dai_digital_mute(struct snd_soc_dai *dai, int mute,
 			     int direction);
 
+int snd_soc_dai_is_dummy(struct snd_soc_dai *dai);
+
 struct snd_soc_dai_ops {
 	/*
 	 * DAI clocking configuration, all optional.
@@ -220,6 +222,8 @@ struct snd_soc_dai_driver {
 	struct snd_soc_pcm_stream capture;
 	struct snd_soc_pcm_stream playback;
 	unsigned int symmetric_rates:1;
+	unsigned int symmetric_channels:1;
+	unsigned int symmetric_samplebits:1;
 
 	/* probe ordering - for components with runtime dependencies */
 	int probe_order;
@@ -244,6 +248,8 @@ struct snd_soc_dai {
 	unsigned int capture_active:1;		/* stream is in use */
 	unsigned int playback_active:1;		/* stream is in use */
 	unsigned int symmetric_rates:1;
+	unsigned int symmetric_channels:1;
+	unsigned int symmetric_samplebits:1;
 	struct snd_pcm_runtime *runtime;
 	unsigned int active;
 	unsigned char probed:1;
@@ -258,6 +264,8 @@ struct snd_soc_dai {
 
 	/* Symmetry data - only valid if symmetry is being enforced */
 	unsigned int rate;
+	unsigned int channels;
+	unsigned int sample_bits;
 
 	/* parent platform/codec */
 	struct snd_soc_platform *platform;

include/sound/soc-dapm.h

@@ -412,6 +412,7 @@ int snd_soc_dapm_new_controls(struct snd_soc_dapm_context *dapm,
 int snd_soc_dapm_new_dai_widgets(struct snd_soc_dapm_context *dapm,
 				 struct snd_soc_dai *dai);
 int snd_soc_dapm_link_dai_widgets(struct snd_soc_card *card);
+void snd_soc_dapm_connect_dai_link_widgets(struct snd_soc_card *card);
 int snd_soc_dapm_new_pcm(struct snd_soc_card *card,
 			 const struct snd_soc_pcm_stream *params,
 			 struct snd_soc_dapm_widget *source,

include/sound/soc.h

@@ -334,9 +334,7 @@ struct snd_soc_jack_pin;
 #include <sound/soc-dapm.h>
 #include <sound/soc-dpcm.h>
 
-#ifdef CONFIG_GPIOLIB
 struct snd_soc_jack_gpio;
-#endif
 
 typedef int (*hw_write_t)(void *,const char* ,int);
 
@@ -446,6 +444,17 @@ int snd_soc_jack_add_gpios(struct snd_soc_jack *jack, int count,
 			struct snd_soc_jack_gpio *gpios);
 void snd_soc_jack_free_gpios(struct snd_soc_jack *jack, int count,
 			struct snd_soc_jack_gpio *gpios);
+#else
+static inline int snd_soc_jack_add_gpios(struct snd_soc_jack *jack, int count,
+					 struct snd_soc_jack_gpio *gpios)
+{
+	return 0;
+}
+
+static inline void snd_soc_jack_free_gpios(struct snd_soc_jack *jack, int count,
+					   struct snd_soc_jack_gpio *gpios)
+{
+}
 #endif
 
 /* codec register bit access */
@@ -580,7 +589,6 @@ struct snd_soc_jack_zone {
  *		       to provide more complex checks (eg, reading an
  *		       ADC).
  */
-#ifdef CONFIG_GPIOLIB
 struct snd_soc_jack_gpio {
 	unsigned int gpio;
 	const char *name;
@@ -594,7 +602,6 @@ struct snd_soc_jack_gpio {
 
 	int (*jack_status_check)(void);
 };
-#endif
 
 struct snd_soc_jack {
 	struct mutex mutex;
@@ -879,6 +886,8 @@ struct snd_soc_dai_link {
 
 	/* Symmetry requirements */
 	unsigned int symmetric_rates:1;
+	unsigned int symmetric_channels:1;
+	unsigned int symmetric_samplebits:1;
 
 	/* Do not create a PCM for this DAI link (Backend link) */
 	unsigned int no_pcm:1;
@@ -886,6 +895,10 @@ struct snd_soc_dai_link {
 	/* This DAI link can route to other DAI links at runtime (Frontend)*/
 	unsigned int dynamic:1;
 
+	/* DPCM capture and Playback support */
+	unsigned int dpcm_capture:1;
+	unsigned int dpcm_playback:1;
+
 	/* pmdown_time is ignored at stop */
 	unsigned int ignore_pmdown_time:1;
 

include/sound/spear_dma.h

@@ -29,7 +29,6 @@ struct spear_dma_data {
 	dma_addr_t addr;
 	u32 max_burst;
 	enum dma_slave_buswidth addr_width;
-	bool (*filter)(struct dma_chan *chan, void *slave);
 };
 
 #endif /* SPEAR_DMA_H */

include/uapi/sound/compress_params.h

@@ -57,6 +57,7 @@
 #define MAX_NUM_CODECS 32
 #define MAX_NUM_CODEC_DESCRIPTORS 32
 #define MAX_NUM_BITRATES 32
+#define MAX_NUM_SAMPLE_RATES 32
 
 /* Codecs are listed linearly to allow for extensibility */
 #define SND_AUDIOCODEC_PCM                   ((__u32) 0x00000001)
@@ -324,7 +325,8 @@ union snd_codec_options {
 
 /** struct snd_codec_desc - description of codec capabilities
  * @max_ch: Maximum number of audio channels
- * @sample_rates: Sampling rates in Hz, use SNDRV_PCM_RATE_xxx for this
+ * @sample_rates: Sampling rates in Hz, use values like 48000 for this
+ * @num_sample_rates: Number of valid values in sample_rates array
  * @bit_rate: Indexed array containing supported bit rates
  * @num_bitrates: Number of valid values in bit_rate array
  * @rate_control: value is specified by SND_RATECONTROLMODE defines.
@@ -346,7 +348,8 @@ union snd_codec_options {
 
 struct snd_codec_desc {
 	__u32 max_ch;
-	__u32 sample_rates;
+	__u32 sample_rates[MAX_NUM_SAMPLE_RATES];
+	__u32 num_sample_rates;
 	__u32 bit_rate[MAX_NUM_BITRATES];
 	__u32 num_bitrates;
 	__u32 rate_control;
@@ -364,7 +367,8 @@ struct snd_codec_desc {
  * @ch_out: Number of output channels. In case of contradiction between
  *		this field and the channelMode field, the channelMode field
  *		overrides.
- * @sample_rate: Audio sample rate of input data
+ * @sample_rate: Audio sample rate of input data in Hz, use values like 48000
+ *		for this.
  * @bit_rate: Bitrate of encoded data. May be ignored by decoders
  * @rate_control: Encoding rate control. See SND_RATECONTROLMODE defines.
  *               Encoders may rely on profiles for quality levels.

sound/arm/aaci.c

@@ -753,7 +753,7 @@ static struct snd_pcm_ops aaci_capture_ops = {
  * Power Management.
  */
 #ifdef CONFIG_PM
-static int aaci_do_suspend(struct snd_card *card, unsigned int state)
+static int aaci_do_suspend(struct snd_card *card)
 {
 	struct aaci *aaci = card->private_data;
 	snd_power_change_state(card, SNDRV_CTL_POWER_D3cold);
@@ -761,28 +761,28 @@ static int aaci_do_suspend(struct snd_card *card, unsigned int state)
 	return 0;
 }
 
-static int aaci_do_resume(struct snd_card *card, unsigned int state)
+static int aaci_do_resume(struct snd_card *card)
 {
 	snd_power_change_state(card, SNDRV_CTL_POWER_D0);
 	return 0;
 }
 
-static int aaci_suspend(struct amba_device *dev, pm_message_t state)
+static int aaci_suspend(struct device *dev)
 {
-	struct snd_card *card = amba_get_drvdata(dev);
+	struct snd_card *card = dev_get_drvdata(dev);
 	return card ? aaci_do_suspend(card) : 0;
 }
 
-static int aaci_resume(struct amba_device *dev)
+static int aaci_resume(struct device *dev)
 {
-	struct snd_card *card = amba_get_drvdata(dev);
+	struct snd_card *card = dev_get_drvdata(dev);
 	return card ? aaci_do_resume(card) : 0;
 }
+
+static SIMPLE_DEV_PM_OPS(aaci_dev_pm_ops, aaci_suspend, aaci_resume);
+#define AACI_DEV_PM_OPS (&aaci_dev_pm_ops)
 #else
-#define aaci_do_suspend		NULL
+#define AACI_DEV_PM_OPS NULL
-#define aaci_do_resume		NULL
-#define aaci_suspend		NULL
-#define aaci_resume		NULL
 #endif
 
 
@@ -1100,11 +1100,10 @@ MODULE_DEVICE_TABLE(amba, aaci_ids);
 static struct amba_driver aaci_driver = {
 	.drv		= {
 		.name	= DRIVER_NAME,
+		.pm	= AACI_DEV_PM_OPS,
 	},
 	.probe		= aaci_probe,
 	.remove		= aaci_remove,
-	.suspend	= aaci_suspend,
-	.resume		= aaci_resume,
 	.id_table	= aaci_ids,
 };
 

sound/atmel/abdac.c

@@ -354,7 +354,7 @@ static int set_sample_rates(struct atmel_abdac *dac)
 	/* we start at 192 kHz and work our way down to 5112 Hz */
 	while (new_rate >= RATE_MIN && index < (MAX_NUM_RATES + 1)) {
 		new_rate = clk_round_rate(dac->sample_clk, 256 * new_rate);
-		if (new_rate < 0)
+		if (new_rate <= 0)
 			break;
 		/* make sure we are below the ABDAC clock */
 		if (index < MAX_NUM_RATES &&

sound/core/Makefile

@@ -10,14 +10,12 @@ snd-$(CONFIG_SND_VMASTER) += vmaster.o
 snd-$(CONFIG_SND_KCTL_JACK) += ctljack.o
 snd-$(CONFIG_SND_JACK)	  += jack.o
 
-snd-pcm-objs := pcm.o pcm_native.o pcm_lib.o pcm_timer.o pcm_misc.o \
+snd-pcm-y := pcm.o pcm_native.o pcm_lib.o pcm_timer.o pcm_misc.o \
-		pcm_memory.o
+		pcm_memory.o memalloc.o
+snd-pcm-$(CONFIG_SND_DMA_SGBUF) += sgbuf.o
 
 snd-pcm-dmaengine-objs := pcm_dmaengine.o
 
-snd-page-alloc-y := memalloc.o
-snd-page-alloc-$(CONFIG_SND_DMA_SGBUF) += sgbuf.o
-
 snd-rawmidi-objs  := rawmidi.o
 snd-timer-objs    := timer.o
 snd-hrtimer-objs  := hrtimer.o
@@ -31,7 +29,7 @@ obj-$(CONFIG_SND_HWDEP)		+= snd-hwdep.o
 obj-$(CONFIG_SND_TIMER)		+= snd-timer.o
 obj-$(CONFIG_SND_HRTIMER)	+= snd-hrtimer.o
 obj-$(CONFIG_SND_RTCTIMER)	+= snd-rtctimer.o
-obj-$(CONFIG_SND_PCM)		+= snd-pcm.o snd-page-alloc.o
+obj-$(CONFIG_SND_PCM)		+= snd-pcm.o
 obj-$(CONFIG_SND_DMAENGINE_PCM)	+= snd-pcm-dmaengine.o
 obj-$(CONFIG_SND_RAWMIDI)	+= snd-rawmidi.o
 

sound/core/compress_offload.c

@@ -501,9 +501,6 @@ static int snd_compress_check_input(struct snd_compr_params *params)
 	if (params->codec.ch_in == 0 || params->codec.ch_out == 0)
 		return -EINVAL;
 
-	if (!(params->codec.sample_rate & SNDRV_PCM_RATE_8000_192000))
-		return -EINVAL;
-
 	return 0;
 }
 

sound/core/memalloc.c

@@ -21,60 +21,18 @@
  *
  */
 
-#include <linux/module.h>
-#include <linux/proc_fs.h>
-#include <linux/init.h>
-#include <linux/pci.h>
 #include <linux/slab.h>
 #include <linux/mm.h>
-#include <linux/seq_file.h>
-#include <asm/uaccess.h>
 #include <linux/dma-mapping.h>
 #include <linux/genalloc.h>
-#include <linux/moduleparam.h>
-#include <linux/mutex.h>
 #include <sound/memalloc.h>
 
-
-MODULE_AUTHOR("Takashi Iwai <tiwai@suse.de>, Jaroslav Kysela <perex@perex.cz>");
-MODULE_DESCRIPTION("Memory allocator for ALSA system.");
-MODULE_LICENSE("GPL");
-
-
-/*
- */
-
-static DEFINE_MUTEX(list_mutex);
-static LIST_HEAD(mem_list_head);
-
-/* buffer preservation list */
-struct snd_mem_list {
-	struct snd_dma_buffer buffer;
-	unsigned int id;
-	struct list_head list;
-};
-
-/* id for pre-allocated buffers */
-#define SNDRV_DMA_DEVICE_UNUSED (unsigned int)-1
-
 /*
  *
  *  Generic memory allocators
  *
  */
 
-static long snd_allocated_pages; /* holding the number of allocated pages */
-
-static inline void inc_snd_pages(int order)
-{
-	snd_allocated_pages += 1 << order;
-}
-
-static inline void dec_snd_pages(int order)
-{
-	snd_allocated_pages -= 1 << order;
-}
-
 /**
  * snd_malloc_pages - allocate pages with the given size
  * @size: the size to allocate in bytes
@@ -87,7 +45,6 @@ static inline void dec_snd_pages(int order)
 void *snd_malloc_pages(size_t size, gfp_t gfp_flags)
 {
 	int pg;
-	void *res;
 
 	if (WARN_ON(!size))
 		return NULL;
@@ -95,9 +52,7 @@ void *snd_malloc_pages(size_t size, gfp_t gfp_flags)
 		return NULL;
 	gfp_flags |= __GFP_COMP;	/* compound page lets parts be mapped */
 	pg = get_order(size);
-	if ((res = (void *) __get_free_pages(gfp_flags, pg)) != NULL)
+	return (void *) __get_free_pages(gfp_flags, pg);
-		inc_snd_pages(pg);
-	return res;
 }
 
 /**
@@ -114,7 +69,6 @@ void snd_free_pages(void *ptr, size_t size)
 	if (ptr == NULL)
 		return;
 	pg = get_order(size);
-	dec_snd_pages(pg);
 	free_pages((unsigned long) ptr, pg);
 }
 
@@ -129,7 +83,6 @@ void snd_free_pages(void *ptr, size_t size)
 static void *snd_malloc_dev_pages(struct device *dev, size_t size, dma_addr_t *dma)
 {
 	int pg;
-	void *res;
 	gfp_t gfp_flags;
 
 	if (WARN_ON(!dma))
@@ -139,11 +92,7 @@ static void *snd_malloc_dev_pages(struct device *dev, size_t size, dma_addr_t *d
 		| __GFP_COMP	/* compound page lets parts be mapped */
 		| __GFP_NORETRY /* don't trigger OOM-killer */
 		| __GFP_NOWARN; /* no stack trace print - this call is non-critical */
-	res = dma_alloc_coherent(dev, PAGE_SIZE << pg, dma, gfp_flags);
+	return dma_alloc_coherent(dev, PAGE_SIZE << pg, dma, gfp_flags);
-	if (res != NULL)
-		inc_snd_pages(pg);
-
-	return res;
 }
 
 /* free the coherent DMA pages */
@@ -155,7 +104,6 @@ static void snd_free_dev_pages(struct device *dev, size_t size, void *ptr,
 	if (ptr == NULL)
 		return;
 	pg = get_order(size);
-	dec_snd_pages(pg);
 	dma_free_coherent(dev, PAGE_SIZE << pg, ptr, dma);
 }
 
@@ -340,256 +288,6 @@ void snd_dma_free_pages(struct snd_dma_buffer *dmab)
 	}
 }
 
-
-/**
- * snd_dma_get_reserved - get the reserved buffer for the given device
- * @dmab: the buffer allocation record to store
- * @id: the buffer id
- *
- * Looks for the reserved-buffer list and re-uses if the same buffer
- * is found in the list.  When the buffer is found, it's removed from the free list.
- *
- * Return: The size of buffer if the buffer is found, or zero if not found.
- */
-size_t snd_dma_get_reserved_buf(struct snd_dma_buffer *dmab, unsigned int id)
-{
-	struct snd_mem_list *mem;
-
-	if (WARN_ON(!dmab))
-		return 0;
-
-	mutex_lock(&list_mutex);
-	list_for_each_entry(mem, &mem_list_head, list) {
-		if (mem->id == id &&
-		    (mem->buffer.dev.dev == NULL || dmab->dev.dev == NULL ||
-		     ! memcmp(&mem->buffer.dev, &dmab->dev, sizeof(dmab->dev)))) {
-			struct device *dev = dmab->dev.dev;
-			list_del(&mem->list);
-			*dmab = mem->buffer;
-			if (dmab->dev.dev == NULL)
-				dmab->dev.dev = dev;
-			kfree(mem);
-			mutex_unlock(&list_mutex);
-			return dmab->bytes;
-		}
-	}
-	mutex_unlock(&list_mutex);
-	return 0;
-}
-
-/**
- * snd_dma_reserve_buf - reserve the buffer
- * @dmab: the buffer to reserve
- * @id: the buffer id
- *
- * Reserves the given buffer as a reserved buffer.
- *
- * Return: Zero if successful, or a negative code on error.
- */
-int snd_dma_reserve_buf(struct snd_dma_buffer *dmab, unsigned int id)
-{
-	struct snd_mem_list *mem;
-
-	if (WARN_ON(!dmab))
-		return -EINVAL;
-	mem = kmalloc(sizeof(*mem), GFP_KERNEL);
-	if (! mem)
-		return -ENOMEM;
-	mutex_lock(&list_mutex);
-	mem->buffer = *dmab;
-	mem->id = id;
-	list_add_tail(&mem->list, &mem_list_head);
-	mutex_unlock(&list_mutex);
-	return 0;
-}
-
-/*
- * purge all reserved buffers
- */
-static void free_all_reserved_pages(void)
-{
-	struct list_head *p;
-	struct snd_mem_list *mem;
-
-	mutex_lock(&list_mutex);
-	while (! list_empty(&mem_list_head)) {
-		p = mem_list_head.next;
-		mem = list_entry(p, struct snd_mem_list, list);
-		list_del(p);
-		snd_dma_free_pages(&mem->buffer);
-		kfree(mem);
-	}
-	mutex_unlock(&list_mutex);
-}
-
-
-#ifdef CONFIG_PROC_FS
-/*
- * proc file interface
- */
-#define SND_MEM_PROC_FILE	"driver/snd-page-alloc"
-static struct proc_dir_entry *snd_mem_proc;
-
-static int snd_mem_proc_read(struct seq_file *seq, void *offset)
-{
-	long pages = snd_allocated_pages >> (PAGE_SHIFT-12);
-	struct snd_mem_list *mem;
-	int devno;
-	static char *types[] = { "UNKNOWN", "CONT", "DEV", "DEV-SG" };
-
-	mutex_lock(&list_mutex);
-	seq_printf(seq, "pages  : %li bytes (%li pages per %likB)\n",
-		   pages * PAGE_SIZE, pages, PAGE_SIZE / 1024);
-	devno = 0;
-	list_for_each_entry(mem, &mem_list_head, list) {
-		devno++;
-		seq_printf(seq, "buffer %d : ID %08x : type %s\n",
-			   devno, mem->id, types[mem->buffer.dev.type]);
-		seq_printf(seq, "  addr = 0x%lx, size = %d bytes\n",
-			   (unsigned long)mem->buffer.addr,
-			   (int)mem->buffer.bytes);
-	}
-	mutex_unlock(&list_mutex);
-	return 0;
-}
-
-static int snd_mem_proc_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, snd_mem_proc_read, NULL);
-}
-
-/* FIXME: for pci only - other bus? */
-#ifdef CONFIG_PCI
-#define gettoken(bufp) strsep(bufp, " \t\n")
-
-static ssize_t snd_mem_proc_write(struct file *file, const char __user * buffer,
-				  size_t count, loff_t * ppos)
-{
-	char buf[128];
-	char *token, *p;
-
-	if (count > sizeof(buf) - 1)
-		return -EINVAL;
-	if (copy_from_user(buf, buffer, count))
-		return -EFAULT;
-	buf[count] = '\0';
-
-	p = buf;
-	token = gettoken(&p);
-	if (! token || *token == '#')
-		return count;
-	if (strcmp(token, "add") == 0) {
-		char *endp;
-		int vendor, device, size, buffers;
-		long mask;
-		int i, alloced;
-		struct pci_dev *pci;
-
-		if ((token = gettoken(&p)) == NULL ||
-		    (vendor = simple_strtol(token, NULL, 0)) <= 0 ||
-		    (token = gettoken(&p)) == NULL ||
-		    (device = simple_strtol(token, NULL, 0)) <= 0 ||
-		    (token = gettoken(&p)) == NULL ||
-		    (mask = simple_strtol(token, NULL, 0)) < 0 ||
-		    (token = gettoken(&p)) == NULL ||
-		    (size = memparse(token, &endp)) < 64*1024 ||
-		    size > 16*1024*1024 /* too big */ ||
-		    (token = gettoken(&p)) == NULL ||
-		    (buffers = simple_strtol(token, NULL, 0)) <= 0 ||
-		    buffers > 4) {
-			printk(KERN_ERR "snd-page-alloc: invalid proc write format\n");
-			return count;
-		}
-		vendor &= 0xffff;
-		device &= 0xffff;
-
-		alloced = 0;
-		pci = NULL;
-		while ((pci = pci_get_device(vendor, device, pci)) != NULL) {
-			if (mask > 0 && mask < 0xffffffff) {
-				if (pci_set_dma_mask(pci, mask) < 0 ||
-				    pci_set_consistent_dma_mask(pci, mask) < 0) {
-					printk(KERN_ERR "snd-page-alloc: cannot set DMA mask %lx for pci %04x:%04x\n", mask, vendor, device);
-					pci_dev_put(pci);
-					return count;
-				}
-			}
-			for (i = 0; i < buffers; i++) {
-				struct snd_dma_buffer dmab;
-				memset(&dmab, 0, sizeof(dmab));
-				if (snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, snd_dma_pci_data(pci),
-							size, &dmab) < 0) {
-					printk(KERN_ERR "snd-page-alloc: cannot allocate buffer pages (size = %d)\n", size);
-					pci_dev_put(pci);
-					return count;
-				}
-				snd_dma_reserve_buf(&dmab, snd_dma_pci_buf_id(pci));
-			}
-			alloced++;
-		}
-		if (! alloced) {
-			for (i = 0; i < buffers; i++) {
-				struct snd_dma_buffer dmab;
-				memset(&dmab, 0, sizeof(dmab));
-				/* FIXME: We can allocate only in ZONE_DMA
-				 * without a device pointer!
-				 */
-				if (snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, NULL,
-							size, &dmab) < 0) {
-					printk(KERN_ERR "snd-page-alloc: cannot allocate buffer pages (size = %d)\n", size);
-					break;
-				}
-				snd_dma_reserve_buf(&dmab, (unsigned int)((vendor << 16) | device));
-			}
-		}
-	} else if (strcmp(token, "erase") == 0)
-		/* FIXME: need for releasing each buffer chunk? */
-		free_all_reserved_pages();
-	else
-		printk(KERN_ERR "snd-page-alloc: invalid proc cmd\n");
-	return count;
-}
-#endif /* CONFIG_PCI */
-
-static const struct file_operations snd_mem_proc_fops = {
-	.owner		= THIS_MODULE,
-	.open		= snd_mem_proc_open,
-	.read		= seq_read,
-#ifdef CONFIG_PCI
-	.write		= snd_mem_proc_write,
-#endif
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
-
-#endif /* CONFIG_PROC_FS */
-
-/*
- * module entry
- */
-
-static int __init snd_mem_init(void)
-{
-#ifdef CONFIG_PROC_FS
-	snd_mem_proc = proc_create(SND_MEM_PROC_FILE, 0644, NULL,
-				   &snd_mem_proc_fops);
-#endif
-	return 0;
-}
-
-static void __exit snd_mem_exit(void)
-{
-	remove_proc_entry(SND_MEM_PROC_FILE, NULL);
-	free_all_reserved_pages();
-	if (snd_allocated_pages > 0)
-		printk(KERN_ERR "snd-malloc: Memory leak?  pages not freed = %li\n", snd_allocated_pages);
-}
-
-
-module_init(snd_mem_init)
-module_exit(snd_mem_exit)
-
-
 /*
  * exports
  */
@@ -597,8 +295,5 @@ EXPORT_SYMBOL(snd_dma_alloc_pages);
 EXPORT_SYMBOL(snd_dma_alloc_pages_fallback);
 EXPORT_SYMBOL(snd_dma_free_pages);
 
-EXPORT_SYMBOL(snd_dma_get_reserved_buf);
-EXPORT_SYMBOL(snd_dma_reserve_buf);
-
 EXPORT_SYMBOL(snd_malloc_pages);
 EXPORT_SYMBOL(snd_free_pages);

sound/core/pcm_memory.c

@@ -51,17 +51,9 @@ static const size_t snd_minimum_buffer = 16384;
 static int preallocate_pcm_pages(struct snd_pcm_substream *substream, size_t size)
 {
 	struct snd_dma_buffer *dmab = &substream->dma_buffer;
+	size_t orig_size = size;
 	int err;
 
-	/* already reserved? */
-	if (snd_dma_get_reserved_buf(dmab, substream->dma_buf_id) > 0) {
-		if (dmab->bytes >= size)
-			return 0; /* yes */
-		/* no, free the reserved block */
-		snd_dma_free_pages(dmab);
-		dmab->bytes = 0;
-	}
-
 	do {
 		if ((err = snd_dma_alloc_pages(dmab->dev.type, dmab->dev.dev,
 					       size, dmab)) < 0) {
@@ -72,6 +64,10 @@ static int preallocate_pcm_pages(struct snd_pcm_substream *substream, size_t siz
 		size >>= 1;
 	} while (size >= snd_minimum_buffer);
 	dmab->bytes = 0; /* tell error */
+	pr_warn("ALSA pcmC%dD%d%c,%d:%s: cannot preallocate for size %zu\n",
+		substream->pcm->card->number, substream->pcm->device,
+		substream->stream ? 'c' : 'p', substream->number,
+		substream->pcm->name, orig_size);
 	return 0;
 }
 
@@ -82,10 +78,7 @@ static void snd_pcm_lib_preallocate_dma_free(struct snd_pcm_substream *substream
 {
 	if (substream->dma_buffer.area == NULL)
 		return;
-	if (substream->dma_buf_id)
+	snd_dma_free_pages(&substream->dma_buffer);
-		snd_dma_reserve_buf(&substream->dma_buffer, substream->dma_buf_id);
-	else
-		snd_dma_free_pages(&substream->dma_buffer);
 	substream->dma_buffer.area = NULL;
 }
 
@@ -260,11 +253,6 @@ static int snd_pcm_lib_preallocate_pages1(struct snd_pcm_substream *substream,
  *
  * Do pre-allocation for the given DMA buffer type.
  *
- * When substream->dma_buf_id is set, the function tries to look for
- * the reserved buffer, and the buffer is not freed but reserved at
- * destruction time.  The dma_buf_id must be unique for all systems
- * (in the same DMA buffer type) e.g. using snd_dma_pci_buf_id().
- *
  * Return: Zero if successful, or a negative error code on failure.
  */
 int snd_pcm_lib_preallocate_pages(struct snd_pcm_substream *substream,

sound/core/pcm_misc.c

@@ -514,3 +514,42 @@ unsigned int snd_pcm_rate_bit_to_rate(unsigned int rate_bit)
 	return 0;
 }
 EXPORT_SYMBOL(snd_pcm_rate_bit_to_rate);
+
+static unsigned int snd_pcm_rate_mask_sanitize(unsigned int rates)
+{
+	if (rates & SNDRV_PCM_RATE_CONTINUOUS)
+		return SNDRV_PCM_RATE_CONTINUOUS;
+	else if (rates & SNDRV_PCM_RATE_KNOT)
+		return SNDRV_PCM_RATE_KNOT;
+	return rates;
+}
+
+/**
+ * snd_pcm_rate_mask_intersect - computes the intersection between two rate masks
+ * @rates_a: The first rate mask
+ * @rates_b: The second rate mask
+ *
+ * This function computes the rates that are supported by both rate masks passed
+ * to the function. It will take care of the special handling of
+ * SNDRV_PCM_RATE_CONTINUOUS and SNDRV_PCM_RATE_KNOT.
+ *
+ * Return: A rate mask containing the rates that are supported by both rates_a
+ * and rates_b.
+ */
+unsigned int snd_pcm_rate_mask_intersect(unsigned int rates_a,
+	unsigned int rates_b)
+{
+	rates_a = snd_pcm_rate_mask_sanitize(rates_a);
+	rates_b = snd_pcm_rate_mask_sanitize(rates_b);
+
+	if (rates_a & SNDRV_PCM_RATE_CONTINUOUS)
+		return rates_b;
+	else if (rates_b & SNDRV_PCM_RATE_CONTINUOUS)
+		return rates_a;
+	else if (rates_a & SNDRV_PCM_RATE_KNOT)
+		return rates_b;
+	else if (rates_b & SNDRV_PCM_RATE_KNOT)
+		return rates_a;
+	return rates_a & rates_b;
+}
+EXPORT_SYMBOL_GPL(snd_pcm_rate_mask_intersect);

sound/oss/dmabuf.c

@@ -28,6 +28,7 @@
 #include <linux/mm.h>
 #include <linux/gfp.h>
 #include "sound_config.h"
+#include "sleep.h"
 
 #define DMAP_FREE_ON_CLOSE      0
 #define DMAP_KEEP_ON_CLOSE      1
@@ -351,8 +352,7 @@ static void dma_reset_output(int dev)
 	if (!signal_pending(current) && adev->dmap_out->qlen && 
 	    adev->dmap_out->underrun_count == 0){
 		spin_unlock_irqrestore(&dmap->lock,flags);
-		interruptible_sleep_on_timeout(&adev->out_sleeper,
+		oss_broken_sleep_on(&adev->out_sleeper, dmabuf_timeout(dmap));
-					       dmabuf_timeout(dmap));
 		spin_lock_irqsave(&dmap->lock,flags);
 	}
 	adev->dmap_out->flags &= ~(DMA_SYNCING | DMA_ACTIVE);
@@ -446,7 +446,7 @@ int DMAbuf_sync(int dev)
 			long t = dmabuf_timeout(dmap);
 			spin_unlock_irqrestore(&dmap->lock,flags);
 			/* FIXME: not safe may miss events */
-			t = interruptible_sleep_on_timeout(&adev->out_sleeper, t);
+			t = oss_broken_sleep_on(&adev->out_sleeper, t);
 			spin_lock_irqsave(&dmap->lock,flags);
 			if (!t) {
 				adev->dmap_out->flags &= ~DMA_SYNCING;
@@ -466,7 +466,7 @@ int DMAbuf_sync(int dev)
 			while (!signal_pending(current) &&
 			       adev->d->local_qlen(dev)){
 				spin_unlock_irqrestore(&dmap->lock,flags);
-				interruptible_sleep_on_timeout(&adev->out_sleeper,
+				oss_broken_sleep_on(&adev->out_sleeper,
 							       dmabuf_timeout(dmap));
 				spin_lock_irqsave(&dmap->lock,flags);
 			}
@@ -587,8 +587,7 @@ int DMAbuf_getrdbuffer(int dev, char **buf, int *len, int dontblock)
 			timeout = dmabuf_timeout(dmap);
 
 		spin_unlock_irqrestore(&dmap->lock,flags);
-		timeout = interruptible_sleep_on_timeout(&adev->in_sleeper,
+		timeout = oss_broken_sleep_on(&adev->in_sleeper, timeout);
-							 timeout);
 		if (!timeout) {
 			/* FIXME: include device name */
 			err = -EIO;
@@ -768,8 +767,7 @@ static int output_sleep(int dev, int dontblock)
 		timeout_value = dmabuf_timeout(dmap);
 	else
 		timeout_value = MAX_SCHEDULE_TIMEOUT;
-	timeout_value = interruptible_sleep_on_timeout(&adev->out_sleeper,
+	timeout_value = oss_broken_sleep_on(&adev->out_sleeper, timeout_value);
-						       timeout_value);
 	if (timeout != MAX_SCHEDULE_TIMEOUT && !timeout_value) {
 		printk(KERN_WARNING "Sound: DMA (output) timed out - IRQ/DRQ config error?\n");
 		dma_reset_output(dev);

sound/oss/dmasound/dmasound.h

@@ -239,7 +239,6 @@ struct sound_queue {
     int busy, syncing, xruns, died;
 };
 
-#define SLEEP(queue)		interruptible_sleep_on_timeout(&queue, HZ)
 #define WAKE_UP(queue)		(wake_up_interruptible(&queue))
 
 extern struct sound_queue dmasound_write_sq;

sound/oss/dmasound/dmasound_core.c

@@ -619,15 +619,27 @@ static ssize_t sq_write(struct file *file, const char __user *src, size_t uLeft,
 	}
 
 	while (uLeft) {
+		DEFINE_WAIT(wait);
+
 		while (write_sq.count >= write_sq.max_active) {
+			prepare_to_wait(&write_sq.action_queue, &wait, TASK_INTERRUPTIBLE);
 			sq_play();
-			if (write_sq.non_blocking)
+			if (write_sq.non_blocking) {
+				finish_wait(&write_sq.action_queue, &wait);
 				return uWritten > 0 ? uWritten : -EAGAIN;
-			SLEEP(write_sq.action_queue);
+			}
-			if (signal_pending(current))
+			if (write_sq.count < write_sq.max_active)
+				break;
+
+			schedule_timeout(HZ);
+			if (signal_pending(current)) {
+				finish_wait(&write_sq.action_queue, &wait);
 				return uWritten > 0 ? uWritten : -EINTR;
+			}
 		}
 
+		finish_wait(&write_sq.action_queue, &wait);
+
 		/* Here, we can avoid disabling the interrupt by first
 		 * copying and translating the data, and then updating
 		 * the write_sq variables. Until this is done, the interrupt
@@ -707,11 +719,8 @@ static int sq_open2(struct sound_queue *sq, struct file *file, fmode_t mode,
 			if (file->f_flags & O_NONBLOCK)
 				return rc;
 			rc = -EINTR;
-			while (sq->busy) {
+			if (wait_event_interruptible(sq->open_queue, !sq->busy))
-				SLEEP(sq->open_queue);
+				return rc;
-				if (signal_pending(current))
-					return rc;
-			}
 			rc = 0;
 #else
 			/* OSS manual says we will return EBUSY regardless
@@ -844,7 +853,8 @@ static int sq_fsync(void)
 	sq_play();	/* there may be an incomplete frame waiting */
 
 	while (write_sq.active) {
-		SLEEP(write_sq.sync_queue);
+		wait_event_interruptible_timeout(write_sq.sync_queue,
+						 !write_sq.active, HZ);
 		if (signal_pending(current)) {
 			/* While waiting for audio output to drain, an
 			 * interrupt occurred.  Stop audio output immediately

sound/oss/midibuf.c

@@ -86,9 +86,8 @@ static void drain_midi_queue(int dev)
 	 */
 
 	if (midi_devs[dev]->buffer_status != NULL)
-		while (!signal_pending(current) && midi_devs[dev]->buffer_status(dev)) 
+		wait_event_interruptible_timeout(midi_sleeper[dev],
-			interruptible_sleep_on_timeout(&midi_sleeper[dev],
+				!midi_devs[dev]->buffer_status(dev), HZ/10);
-						       HZ/10);
 }
 
 static void midi_input_intr(int dev, unsigned char data)
@@ -233,8 +232,8 @@ void MIDIbuf_release(int dev, struct file *file)
 							   * devices
 							 */
 
-		while (!signal_pending(current) && DATA_AVAIL(midi_out_buf[dev]))
+		wait_event_interruptible(midi_sleeper[dev],
-			  interruptible_sleep_on(&midi_sleeper[dev]);
+					 !DATA_AVAIL(midi_out_buf[dev]));
 		/*
 		 *	Sync
 		 */
@@ -282,8 +281,8 @@ int MIDIbuf_write(int dev, struct file *file, const char __user *buf, int count)
 				goto out;
 			}
 
-			interruptible_sleep_on(&midi_sleeper[dev]);
+			if (wait_event_interruptible(midi_sleeper[dev],
-			if (signal_pending(current)) 
+						SPACE_AVAIL(midi_out_buf[dev])))
 			{
 				c = -EINTR;
 				goto out;
@@ -325,8 +324,9 @@ int MIDIbuf_read(int dev, struct file *file, char __user *buf, int count)
  			c = -EAGAIN;
 			goto out;
  		}
-		interruptible_sleep_on_timeout(&input_sleeper[dev],
+		wait_event_interruptible_timeout(input_sleeper[dev],
-					       parms[dev].prech_timeout);
+						 DATA_AVAIL(midi_in_buf[dev]),
+						 parms[dev].prech_timeout);
 
 		if (signal_pending(current))
 			c = -EINTR;	/* The user is getting restless */

sound/oss/msnd_pinnacle.c

@@ -664,12 +664,15 @@ static long dev_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 
 static void dsp_write_flush(void)
 {
+	int timeout = get_play_delay_jiffies(dev.DAPF.len);
+
 	if (!(dev.mode & FMODE_WRITE) || !test_bit(F_WRITING, &dev.flags))
 		return;
 	set_bit(F_WRITEFLUSH, &dev.flags);
-	interruptible_sleep_on_timeout(
+	wait_event_interruptible_timeout(
-		&dev.writeflush,
+		dev.writeflush,
-		get_play_delay_jiffies(dev.DAPF.len));
+		!test_bit(F_WRITEFLUSH, &dev.flags),
+		timeout);
 	clear_bit(F_WRITEFLUSH, &dev.flags);
 	if (!signal_pending(current)) {
 		current->state = TASK_INTERRUPTIBLE;
@@ -897,6 +900,7 @@ static int dsp_read(char __user *buf, size_t len)
 {
 	int count = len;
 	char *page = (char *)__get_free_page(GFP_KERNEL);
+	int timeout = get_rec_delay_jiffies(DAR_BUFF_SIZE);
 
 	if (!page)
 		return -ENOMEM;
@@ -936,11 +940,11 @@ static int dsp_read(char __user *buf, size_t len)
 
 		if (count > 0) {
 			set_bit(F_READBLOCK, &dev.flags);
-			if (!interruptible_sleep_on_timeout(
+			if (wait_event_interruptible_timeout(
-				&dev.readblock,
+					dev.readblock,
-				get_rec_delay_jiffies(DAR_BUFF_SIZE)))
+					test_bit(F_READBLOCK, &dev.flags),
+					timeout) <= 0)
 				clear_bit(F_READING, &dev.flags);
-			clear_bit(F_READBLOCK, &dev.flags);
 			if (signal_pending(current)) {
 				free_page((unsigned long)page);
 				return -EINTR;
@@ -955,6 +959,7 @@ static int dsp_write(const char __user *buf, size_t len)
 {
 	int count = len;
 	char *page = (char *)__get_free_page(GFP_KERNEL);
+	int timeout = get_play_delay_jiffies(DAP_BUFF_SIZE);
 
 	if (!page)
 		return -ENOMEM;
@@ -995,10 +1000,10 @@ static int dsp_write(const char __user *buf, size_t len)
 
 		if (count > 0) {
 			set_bit(F_WRITEBLOCK, &dev.flags);
-			interruptible_sleep_on_timeout(
+			wait_event_interruptible_timeout(
-				&dev.writeblock,
+				dev.writeblock,
-				get_play_delay_jiffies(DAP_BUFF_SIZE));
+				test_bit(F_WRITEBLOCK, &dev.flags),
-			clear_bit(F_WRITEBLOCK, &dev.flags);
+				timeout);
 			if (signal_pending(current)) {
 				free_page((unsigned long)page);
 				return -EINTR;
@@ -1044,7 +1049,7 @@ static __inline__ void eval_dsp_msg(register WORD wMessage)
 			clear_bit(F_WRITING, &dev.flags);
 		}
 
-		if (test_bit(F_WRITEBLOCK, &dev.flags))
+		if (test_and_clear_bit(F_WRITEBLOCK, &dev.flags))
 			wake_up_interruptible(&dev.writeblock);
 		break;
 
@@ -1055,7 +1060,7 @@ static __inline__ void eval_dsp_msg(register WORD wMessage)
 
 		pack_DARQ_to_DARF(dev.last_recbank);
 
-		if (test_bit(F_READBLOCK, &dev.flags))
+		if (test_and_clear_bit(F_READBLOCK, &dev.flags))
 			wake_up_interruptible(&dev.readblock);
 		break;
 

sound/oss/sequencer.c

@@ -19,6 +19,7 @@
 #include "sound_config.h"
 
 #include "midi_ctrl.h"
+#include "sleep.h"
 
 static int      sequencer_ok;
 static struct sound_timer_operations *tmr;
@@ -100,8 +101,7 @@ int sequencer_read(int dev, struct file *file, char __user *buf, int count)
   			return -EAGAIN;
   		}
 
- 		interruptible_sleep_on_timeout(&midi_sleeper,
+		oss_broken_sleep_on(&midi_sleeper, pre_event_timeout);
-					       pre_event_timeout);
 		spin_lock_irqsave(&lock,flags);
 		if (!iqlen)
 		{
@@ -343,7 +343,7 @@ static int seq_queue(unsigned char *note, char nonblock)
 		/*
 		 * Sleep until there is enough space on the queue
 		 */
-		interruptible_sleep_on(&seq_sleeper);
+		oss_broken_sleep_on(&seq_sleeper, MAX_SCHEDULE_TIMEOUT);
 	}
 	if (qlen >= SEQ_MAX_QUEUE)
 	{
@@ -1122,8 +1122,7 @@ static void seq_drain_midi_queues(void)
 		 */
 
  		if (n)
- 			interruptible_sleep_on_timeout(&seq_sleeper,
+			oss_broken_sleep_on(&seq_sleeper, HZ/10);
-						       HZ/10);
 	}
 }
 
@@ -1145,8 +1144,7 @@ void sequencer_release(int dev, struct file *file)
 		while (!signal_pending(current) && qlen > 0)
 		{
   			seq_sync();
- 			interruptible_sleep_on_timeout(&seq_sleeper,
+			oss_broken_sleep_on(&seq_sleeper, 3*HZ);
-						       3*HZ);
  			/* Extra delay */
 		}
 	}
@@ -1201,7 +1199,7 @@ static int seq_sync(void)
 		seq_startplay();
 
  	if (qlen > 0)
- 		interruptible_sleep_on_timeout(&seq_sleeper, HZ);
+		oss_broken_sleep_on(&seq_sleeper, HZ);
 	return qlen;
 }
 
@@ -1224,7 +1222,7 @@ static void midi_outc(int dev, unsigned char data)
 
 	spin_lock_irqsave(&lock,flags);
  	while (n && !midi_devs[dev]->outputc(dev, data)) {
- 		interruptible_sleep_on_timeout(&seq_sleeper, HZ/25);
+		oss_broken_sleep_on(&seq_sleeper, HZ/25);
   		n--;
   	}
 	spin_unlock_irqrestore(&lock,flags);

sound/oss/sleep.h

@@ -0,0 +1,18 @@
+#include <linux/wait.h>
+
+/*
+ * Do not use. This is a replacement for the old
+ * "interruptible_sleep_on_timeout" function that has been
+ * deprecated for ages. All users should instead try to use
+ * wait_event_interruptible_timeout.
+ */
+
+static inline long
+oss_broken_sleep_on(wait_queue_head_t *q, long timeout)
+{
+	DEFINE_WAIT(wait);
+	prepare_to_wait(q, &wait, TASK_INTERRUPTIBLE);
+	timeout = schedule_timeout(timeout);
+	finish_wait(q, &wait);
+	return timeout;
+}

sound/oss/swarm_cs4297a.c

@@ -90,6 +90,8 @@
 #include <asm/sibyte/sb1250_mac.h>
 #include <asm/sibyte/sb1250.h>
 
+#include "sleep.h"
+
 struct cs4297a_state;
 
 static DEFINE_MUTEX(swarm_cs4297a_mutex);
@@ -748,7 +750,7 @@ static int serdma_reg_access(struct cs4297a_state *s, u64 data)
                 /* Since a writer has the DSP open, we have to mux the
                    request in */
                 s->reg_request = data;
-                interruptible_sleep_on(&s->dma_dac.reg_wait);
+		oss_broken_sleep_on(&s->dma_dac.reg_wait, MAX_SCHEDULE_TIMEOUT);
                 /* XXXKW how can I deal with the starvation case where
                    the opener isn't writing? */
         } else {
@@ -790,7 +792,7 @@ static int cs4297a_read_ac97(struct cs4297a_state *s, u32 offset,
         if (serdma_reg_access(s, (0xCLL << 60) | (1LL << 47) | ((u64)(offset & 0x7F) << 40)))
                 return -1;
 
-        interruptible_sleep_on(&s->dma_adc.reg_wait);
+	oss_broken_sleep_on(&s->dma_adc.reg_wait, MAX_SCHEDULE_TIMEOUT);
         *value = s->read_value;
         CS_DBGOUT(CS_AC97, 2,
                   printk(KERN_INFO "cs4297a: rdr reg %x -> %x\n", s->read_reg, s->read_value));
@@ -1740,7 +1742,7 @@ static ssize_t cs4297a_read(struct file *file, char *buffer, size_t count,
 			start_adc(s);
 			if (file->f_flags & O_NONBLOCK)
 				return ret ? ret : -EAGAIN;
-			interruptible_sleep_on(&s->dma_adc.wait);
+			oss_broken_sleep_on(&s->dma_adc.wait, MAX_SCHEDULE_TIMEOUT);
 			if (signal_pending(current))
 				return ret ? ret : -ERESTARTSYS;
 			continue;
@@ -1836,7 +1838,7 @@ static ssize_t cs4297a_write(struct file *file, const char *buffer,
 			start_dac(s);
 			if (file->f_flags & O_NONBLOCK)
 				return ret ? ret : -EAGAIN;
-			interruptible_sleep_on(&d->wait);
+			oss_broken_sleep_on(&d->wait, MAX_SCHEDULE_TIMEOUT);
 			if (signal_pending(current))
 				return ret ? ret : -ERESTARTSYS;
 			continue;
@@ -2452,7 +2454,7 @@ static int cs4297a_locked_open(struct inode *inode, struct file *file)
 				return -EBUSY;
 			}
 			mutex_unlock(&s->open_sem_dac);
-			interruptible_sleep_on(&s->open_wait_dac);
+			oss_broken_sleep_on(&s->open_wait_dac, MAX_SCHEDULE_TIMEOUT);
 
 			if (signal_pending(current)) {
                                 printk("open - sig pending\n");
@@ -2469,7 +2471,7 @@ static int cs4297a_locked_open(struct inode *inode, struct file *file)
 				return -EBUSY;
 			}
 			mutex_unlock(&s->open_sem_adc);
-			interruptible_sleep_on(&s->open_wait_adc);
+			oss_broken_sleep_on(&s->open_wait_adc, MAX_SCHEDULE_TIMEOUT);
 
 			if (signal_pending(current)) {
                                 printk("open - sig pending\n");

sound/oss/vwsnd.c

@@ -2921,6 +2921,7 @@ static int vwsnd_audio_open(struct inode *inode, struct file *file)
 	vwsnd_dev_t *devc;
 	int minor = iminor(inode);
 	int sw_samplefmt;
+	DEFINE_WAIT(wait);
 
 	DBGE("(inode=0x%p, file=0x%p)\n", inode, file);
 
@@ -2937,21 +2938,26 @@ static int vwsnd_audio_open(struct inode *inode, struct file *file)
 	}
 
 	mutex_lock(&devc->open_mutex);
-	while (devc->open_mode & file->f_mode) {
+	while (1) {
+		prepare_to_wait(&devc->open_wait, &wait, TASK_INTERRUPTIBLE);
+		if (!(devc->open_mode & file->f_mode))
+			break;
+
 		mutex_unlock(&devc->open_mutex);
+		mutex_unlock(&vwsnd_mutex);
 		if (file->f_flags & O_NONBLOCK) {
 			DEC_USE_COUNT;
-			mutex_unlock(&vwsnd_mutex);
 			return -EBUSY;
 		}
-		interruptible_sleep_on(&devc->open_wait);
+		schedule();
 		if (signal_pending(current)) {
 			DEC_USE_COUNT;
-			mutex_unlock(&vwsnd_mutex);
 			return -ERESTARTSYS;
 		}
+		mutex_lock(&vwsnd_mutex);
 		mutex_lock(&devc->open_mutex);
 	}
+	finish_wait(&devc->open_wait, &wait);
 	devc->open_mode |= file->f_mode & (FMODE_READ | FMODE_WRITE);
 	mutex_unlock(&devc->open_mutex);
 

sound/pci/Kconfig

@@ -25,6 +25,7 @@ config SND_ALS300
 	select SND_PCM
 	select SND_AC97_CODEC
 	select SND_OPL3_LIB
+	select ZONE_DMA
 	help
 	  Say 'Y' or 'M' to include support for Avance Logic ALS300/ALS300+
 
@@ -49,6 +50,7 @@ config SND_ALI5451
 	tristate "ALi M5451 PCI Audio Controller"
 	select SND_MPU401_UART
 	select SND_AC97_CODEC
+	select ZONE_DMA
 	help
 	  Say Y here to include support for the integrated AC97 sound
 	  device on motherboards using the ALi M5451 Audio Controller
@@ -153,6 +155,7 @@ config SND_AZT3328
 	select SND_PCM
 	select SND_RAWMIDI
 	select SND_AC97_CODEC
+	select ZONE_DMA
 	help
 	  Say Y here to include support for Aztech AZF3328 (PCI168)
 	  soundcards.
@@ -254,6 +257,7 @@ config SND_CS46XX
 	tristate "Cirrus Logic (Sound Fusion) CS4280/CS461x/CS462x/CS463x"
 	select SND_RAWMIDI
 	select SND_AC97_CODEC
+	select FW_LOADER
 	help
 	  Say Y here to include support for Cirrus Logic CS4610/CS4612/
 	  CS4614/CS4615/CS4622/CS4624/CS4630/CS4280 chips.
@@ -458,6 +462,7 @@ config SND_EMU10K1
 	select SND_HWDEP
 	select SND_RAWMIDI
 	select SND_AC97_CODEC
+	select ZONE_DMA
 	help
 	  Say Y to include support for Sound Blaster PCI 512, Live!,
 	  Audigy and E-mu APS (partially supported) soundcards.
@@ -473,6 +478,7 @@ config SND_EMU10K1X
 	tristate "Emu10k1X (Dell OEM Version)"
 	select SND_AC97_CODEC
 	select SND_RAWMIDI
+	select ZONE_DMA
 	help
 	  Say Y here to include support for the Dell OEM version of the
 	  Sound Blaster Live!.
@@ -506,6 +512,7 @@ config SND_ES1938
 	select SND_OPL3_LIB
 	select SND_MPU401_UART
 	select SND_AC97_CODEC
+	select ZONE_DMA
 	help
 	  Say Y here to include support for soundcards based on ESS Solo-1
 	  (ES1938, ES1946, ES1969) chips.
@@ -517,6 +524,7 @@ config SND_ES1968
 	tristate "ESS ES1968/1978 (Maestro-1/2/2E)"
 	select SND_MPU401_UART
 	select SND_AC97_CODEC
+	select ZONE_DMA
 	help
 	  Say Y here to include support for soundcards based on ESS Maestro
 	  1/2/2E chips.
@@ -605,6 +613,7 @@ config SND_ICE1712
 	select SND_MPU401_UART
 	select SND_AC97_CODEC
 	select BITREVERSE
+	select ZONE_DMA
 	help
 	  Say Y here to include support for soundcards based on the
 	  ICE1712 (Envy24) chip.
@@ -692,6 +701,7 @@ config SND_LX6464ES
 config SND_MAESTRO3
 	tristate "ESS Allegro/Maestro3"
 	select SND_AC97_CODEC
+	select ZONE_DMA
 	help
 	  Say Y here to include support for soundcards based on ESS Maestro 3
 	  (Allegro) chips.
@@ -788,6 +798,7 @@ config SND_SIS7019
 	tristate "SiS 7019 Audio Accelerator"
 	depends on X86 && !X86_64
 	select SND_AC97_CODEC
+	select ZONE_DMA
 	help
 	  Say Y here to include support for the SiS 7019 Audio Accelerator.
 
@@ -799,6 +810,7 @@ config SND_SONICVIBES
 	select SND_OPL3_LIB
 	select SND_MPU401_UART
 	select SND_AC97_CODEC
+	select ZONE_DMA
 	help
 	  Say Y here to include support for soundcards based on the S3
 	  SonicVibes chip.
@@ -810,6 +822,7 @@ config SND_TRIDENT
 	tristate "Trident 4D-Wave DX/NX; SiS 7018"
 	select SND_MPU401_UART
 	select SND_AC97_CODEC
+	select ZONE_DMA
 	help
 	  Say Y here to include support for soundcards based on Trident
 	  4D-Wave DX/NX or SiS 7018 chips.

sound/pci/cs46xx/cs46xx.h

@@ -1716,9 +1716,14 @@ struct snd_cs46xx {
 	struct snd_pcm *pcm_rear;
 	struct snd_pcm *pcm_center_lfe;
 	struct snd_pcm *pcm_iec958;
+
+#define CS46XX_DSP_MODULES	5
+	struct dsp_module_desc *modules[CS46XX_DSP_MODULES];
 #else /* for compatibility */
 	struct snd_cs46xx_pcm *playback_pcm;
 	unsigned int play_ctl;
+
+	struct ba1_struct *ba1;
 #endif
 
 #ifdef CONFIG_PM_SLEEP

sound/pci/cs46xx/cs46xx_lib.c

@@ -54,7 +54,9 @@
 #include <linux/gameport.h>
 #include <linux/mutex.h>
 #include <linux/export.h>
-
+#include <linux/module.h>
+#include <linux/firmware.h>
+#include <linux/vmalloc.h>
 
 #include <sound/core.h>
 #include <sound/control.h>
@@ -330,13 +332,146 @@ int snd_cs46xx_download(struct snd_cs46xx *chip,
 	return 0;
 }
 
+static inline void memcpy_le32(void *dst, const void *src, unsigned int len)
+{
+#ifdef __LITTLE_ENDIAN
+	memcpy(dst, src, len);
+#else
+	u32 *_dst = dst;
+	const __le32 *_src = src;
+	len /= 4;
+	while (len-- > 0)
+		*_dst++ = le32_to_cpu(*_src++);
+#endif
+}
+
 #ifdef CONFIG_SND_CS46XX_NEW_DSP
 
-#include "imgs/cwc4630.h"
+static const char *module_names[CS46XX_DSP_MODULES] = {
-#include "imgs/cwcasync.h"
+	"cwc4630", "cwcasync", "cwcsnoop", "cwcbinhack", "cwcdma"
-#include "imgs/cwcsnoop.h"
+};
-#include "imgs/cwcbinhack.h"
+
-#include "imgs/cwcdma.h"
+MODULE_FIRMWARE("cs46xx/cwc4630");
+MODULE_FIRMWARE("cs46xx/cwcasync");
+MODULE_FIRMWARE("cs46xx/cwcsnoop");
+MODULE_FIRMWARE("cs46xx/cwcbinhack");
+MODULE_FIRMWARE("cs46xx/cwcdma");
+
+static void free_module_desc(struct dsp_module_desc *module)
+{
+	if (!module)
+		return;
+	kfree(module->module_name);
+	kfree(module->symbol_table.symbols);
+	if (module->segments) {
+		int i;
+		for (i = 0; i < module->nsegments; i++)
+			kfree(module->segments[i].data);
+		kfree(module->segments);
+	}
+}
+
+/* firmware binary format:
+ * le32 nsymbols;
+ * struct {
+ *	le32 address;
+ *	char symbol_name[DSP_MAX_SYMBOL_NAME];
+ *	le32 symbol_type;
+ * } symbols[nsymbols];
+ * le32 nsegments;
+ * struct {
+ *	le32 segment_type;
+ *	le32 offset;
+ *	le32 size;
+ *	le32 data[size];
+ * } segments[nsegments];
+ */
+
+static int load_firmware(struct snd_cs46xx *chip,
+			 struct dsp_module_desc **module_ret,
+			 const char *fw_name)
+{
+	int i, err;
+	unsigned int nums, fwlen, fwsize;
+	const __le32 *fwdat;
+	struct dsp_module_desc *module = NULL;
+	const struct firmware *fw;
+	char fw_path[32];
+
+	sprintf(fw_path, "cs46xx/%s", fw_name);
+	err = request_firmware(&fw, fw_path, &chip->pci->dev);
+	if (err < 0)
+		return err;
+	fwsize = fw->size / 4;
+	if (fwsize < 2) {
+		err = -EINVAL;
+		goto error;
+	}
+
+	err = -ENOMEM;
+	module = kzalloc(sizeof(*module), GFP_KERNEL);
+	if (!module)
+		goto error;
+	module->module_name = kstrdup(fw_name, GFP_KERNEL);
+	if (!module->module_name)
+		goto error;
+
+	fwlen = 0;
+	fwdat = (const __le32 *)fw->data;
+	nums = module->symbol_table.nsymbols = le32_to_cpu(fwdat[fwlen++]);
+	if (nums >= 40)
+		goto error_inval;
+	module->symbol_table.symbols =
+		kcalloc(nums, sizeof(struct dsp_symbol_entry), GFP_KERNEL);
+	if (!module->symbol_table.symbols)
+		goto error;
+	for (i = 0; i < nums; i++) {
+		struct dsp_symbol_entry *entry =
+			&module->symbol_table.symbols[i];
+		if (fwlen + 2 + DSP_MAX_SYMBOL_NAME / 4 > fwsize)
+			goto error_inval;
+		entry->address = le32_to_cpu(fwdat[fwlen++]);
+		memcpy(entry->symbol_name, &fwdat[fwlen], DSP_MAX_SYMBOL_NAME - 1);
+		fwlen += DSP_MAX_SYMBOL_NAME / 4;
+		entry->symbol_type = le32_to_cpu(fwdat[fwlen++]);
+	}
+
+	if (fwlen >= fwsize)
+		goto error_inval;
+	nums = module->nsegments = le32_to_cpu(fwdat[fwlen++]);
+	if (nums > 10)
+		goto error_inval;
+	module->segments =
+		kcalloc(nums, sizeof(struct dsp_segment_desc), GFP_KERNEL);
+	if (!module->segments)
+		goto error;
+	for (i = 0; i < nums; i++) {
+		struct dsp_segment_desc *entry = &module->segments[i];
+		if (fwlen + 3 > fwsize)
+			goto error_inval;
+		entry->segment_type = le32_to_cpu(fwdat[fwlen++]);
+		entry->offset = le32_to_cpu(fwdat[fwlen++]);
+		entry->size = le32_to_cpu(fwdat[fwlen++]);
+		if (fwlen + entry->size > fwsize)
+			goto error_inval;
+		entry->data = kmalloc(entry->size * 4, GFP_KERNEL);
+		if (!entry->data)
+			goto error;
+		memcpy_le32(entry->data, &fwdat[fwlen], entry->size * 4);
+		fwlen += entry->size;
+	}
+
+	*module_ret = module;
+	release_firmware(fw);
+	return 0;
+
+ error_inval:
+	err = -EINVAL;
+ error:
+	free_module_desc(module);
+	release_firmware(fw);
+	return err;
+}
 
 int snd_cs46xx_clear_BA1(struct snd_cs46xx *chip,
                          unsigned long offset,
@@ -361,20 +496,63 @@ int snd_cs46xx_clear_BA1(struct snd_cs46xx *chip,
 
 #else /* old DSP image */
 
-#include "cs46xx_image.h"
+struct ba1_struct {
+	struct {
+		u32 offset;
+		u32 size;
+	} memory[BA1_MEMORY_COUNT];
+	u32 map[BA1_DWORD_SIZE];
+};
+
+MODULE_FIRMWARE("cs46xx/ba1");
+
+static int load_firmware(struct snd_cs46xx *chip)
+{
+	const struct firmware *fw;
+	int i, size, err;
+
+	err = request_firmware(&fw, "cs46xx/ba1", &chip->pci->dev);
+	if (err < 0)
+		return err;
+	if (fw->size != sizeof(*chip->ba1)) {
+		err = -EINVAL;
+		goto error;
+	}
+
+	chip->ba1 = vmalloc(sizeof(*chip->ba1));
+	if (!chip->ba1) {
+		err = -ENOMEM;
+		goto error;
+	}
+
+	memcpy_le32(chip->ba1, fw->data, sizeof(*chip->ba1));
+
+	/* sanity check */
+	size = 0;
+	for (i = 0; i < BA1_MEMORY_COUNT; i++)
+		size += chip->ba1->memory[i].size;
+	if (size > BA1_DWORD_SIZE * 4)
+		err = -EINVAL;
+
+ error:
+	release_firmware(fw);
+	return err;
+}
 
 int snd_cs46xx_download_image(struct snd_cs46xx *chip)
 {
 	int idx, err;
-	unsigned long offset = 0;
+	unsigned int offset = 0;
+	struct ba1_struct *ba1 = chip->ba1;
 
 	for (idx = 0; idx < BA1_MEMORY_COUNT; idx++) {
-		if ((err = snd_cs46xx_download(chip,
+		err = snd_cs46xx_download(chip,
-					       &BA1Struct.map[offset],
+					  &ba1->map[offset],
-					       BA1Struct.memory[idx].offset,
+					  ba1->memory[idx].offset,
-					       BA1Struct.memory[idx].size)) < 0)
+					  ba1->memory[idx].size);
+		if (err < 0)
 			return err;
-		offset += BA1Struct.memory[idx].size >> 2;
+		offset += ba1->memory[idx].size >> 2;
 	}	
 	return 0;
 }
@@ -2798,6 +2976,10 @@ static int snd_cs46xx_free(struct snd_cs46xx *chip)
 		cs46xx_dsp_spos_destroy(chip);
 		chip->dsp_spos_instance = NULL;
 	}
+	for (idx = 0; idx < CS46XX_DSP_MODULES; idx++)
+		free_module_desc(chip->modules[idx]);
+#else
+	vfree(chip->ba1);
 #endif
 	
 #ifdef CONFIG_PM_SLEEP
@@ -3067,6 +3249,11 @@ static void cs46xx_enable_stream_irqs(struct snd_cs46xx *chip)
 int snd_cs46xx_start_dsp(struct snd_cs46xx *chip)
 {	
 	unsigned int tmp;
+#ifdef CONFIG_SND_CS46XX_NEW_DSP
+	int i;
+#endif
+	int err;
+
 	/*
 	 *  Reset the processor.
 	 */
@@ -3075,45 +3262,33 @@ int snd_cs46xx_start_dsp(struct snd_cs46xx *chip)
 	 *  Download the image to the processor.
 	 */
 #ifdef CONFIG_SND_CS46XX_NEW_DSP
-#if 0
+	for (i = 0; i < CS46XX_DSP_MODULES; i++) {
-	if (cs46xx_dsp_load_module(chip, &cwcemb80_module) < 0) {
+		err = load_firmware(chip, &chip->modules[i], module_names[i]);
-		snd_printk(KERN_ERR "image download error\n");
+		if (err < 0) {
-		return -EIO;
+			snd_printk(KERN_ERR "firmware load error [%s]\n",
-	}
+				   module_names[i]);
-#endif
+			return err;
-
+		}
-	if (cs46xx_dsp_load_module(chip, &cwc4630_module) < 0) {
+		err = cs46xx_dsp_load_module(chip, chip->modules[i]);
-		snd_printk(KERN_ERR "image download error [cwc4630]\n");
+		if (err < 0) {
-		return -EIO;
+			snd_printk(KERN_ERR "image download error [%s]\n",
-	}
+				   module_names[i]);
-
+			return err;
-	if (cs46xx_dsp_load_module(chip, &cwcasync_module) < 0) {
+		}
-		snd_printk(KERN_ERR "image download error [cwcasync]\n");
-		return -EIO;
-	}
-
-	if (cs46xx_dsp_load_module(chip, &cwcsnoop_module) < 0) {
-		snd_printk(KERN_ERR "image download error [cwcsnoop]\n");
-		return -EIO;
-	}
-
-	if (cs46xx_dsp_load_module(chip, &cwcbinhack_module) < 0) {
-		snd_printk(KERN_ERR "image download error [cwcbinhack]\n");
-		return -EIO;
-	}
-
-	if (cs46xx_dsp_load_module(chip, &cwcdma_module) < 0) {
-		snd_printk(KERN_ERR "image download error [cwcdma]\n");
-		return -EIO;
 	}
 
 	if (cs46xx_dsp_scb_and_task_init(chip) < 0)
 		return -EIO;
 #else
+	err = load_firmware(chip);
+	if (err < 0)
+		return err;
+
 	/* old image */
-	if (snd_cs46xx_download_image(chip) < 0) {
+	err = snd_cs46xx_download_image(chip);
+	if (err < 0) {
 		snd_printk(KERN_ERR "image download error\n");
-		return -EIO;
+		return err;
 	}
 
 	/*

sound/pci/cs46xx/imgs/cwc4630.h

@@ -1,320 +0,0 @@
-/* generated from cwc4630.osp DO NOT MODIFY */
-
-#ifndef __HEADER_cwc4630_H__
-#define __HEADER_cwc4630_H__
-
-static struct dsp_symbol_entry cwc4630_symbols[] = {
-  { 0x0000, "BEGINADDRESS",0x00 },
-  { 0x8000, "EXECCHILD",0x03 },
-  { 0x8001, "EXECCHILD_98",0x03 },
-  { 0x8003, "EXECCHILD_PUSH1IND",0x03 },
-  { 0x8008, "EXECSIBLING",0x03 },
-  { 0x800a, "EXECSIBLING_298",0x03 },
-  { 0x800b, "EXECSIBLING_2IND1",0x03 },
-  { 0x8010, "TIMINGMASTER",0x03 },
-  { 0x804f, "S16_CODECINPUTTASK",0x03 },
-  { 0x805e, "PCMSERIALINPUTTASK",0x03 },
-  { 0x806d, "S16_MIX_TO_OSTREAM",0x03 },
-  { 0x809a, "S16_MIX",0x03 },
-  { 0x80bb, "S16_UPSRC",0x03 },
-  { 0x813b, "MIX3_EXP",0x03 },
-  { 0x8164, "DECIMATEBYPOW2",0x03 },
-  { 0x8197, "VARIDECIMATE",0x03 },
-  { 0x81f2, "_3DINPUTTASK",0x03 },
-  { 0x820a, "_3DPRLGCINPTASK",0x03 },
-  { 0x8227, "_3DSTEREOINPUTTASK",0x03 },
-  { 0x8242, "_3DOUTPUTTASK",0x03 },
-  { 0x82c4, "HRTF_MORPH_TASK",0x03 },
-  { 0x82c6, "WAIT4DATA",0x03 },
-  { 0x82fa, "PROLOGIC",0x03 },
-  { 0x8496, "DECORRELATOR",0x03 },
-  { 0x84a4, "STEREO2MONO",0x03 },
-  { 0x0070, "SPOSCB",0x02 },
-  { 0x0107, "TASKTREETHREAD",0x03 },
-  { 0x013c, "TASKTREEHEADERCODE",0x03 },
-  { 0x0145, "FGTASKTREEHEADERCODE",0x03 },
-  { 0x0169, "NULLALGORITHM",0x03 },
-  { 0x016d, "HFGEXECCHILD",0x03 },
-  { 0x016e, "HFGEXECCHILD_98",0x03 },
-  { 0x0170, "HFGEXECCHILD_PUSH1IND",0x03 },
-  { 0x0173, "HFGEXECSIBLING",0x03 },
-  { 0x0175, "HFGEXECSIBLING_298",0x03 },
-  { 0x0176, "HFGEXECSIBLING_2IND1",0x03 },
-  { 0x0179, "S16_CODECOUTPUTTASK",0x03 },
-  { 0x0194, "#CODE_END",0x00 },
-}; /* cwc4630 symbols */
-
-static u32 cwc4630_code[] = {
-/* BEGINADDRESS */
-/* 0000 */ 0x00040730,0x00001002,0x000f619e,0x00001003,
-/* 0002 */ 0x00001705,0x00001400,0x000a411e,0x00001003,
-/* 0004 */ 0x00040730,0x00001002,0x000f619e,0x00001003,
-/* 0006 */ 0x00009705,0x00001400,0x000a411e,0x00001003,
-/* 0008 */ 0x00040730,0x00001002,0x000f619e,0x00001003,
-/* 000A */ 0x00011705,0x00001400,0x000a411e,0x00001003,
-/* 000C */ 0x00040730,0x00001002,0x000f619e,0x00001003,
-/* 000E */ 0x00019705,0x00001400,0x000a411e,0x00001003,
-/* 0010 */ 0x00040730,0x00001002,0x000f619e,0x00001003,
-/* 0012 */ 0x00021705,0x00001400,0x000a411e,0x00001003,
-/* 0014 */ 0x00040730,0x00001002,0x000f619e,0x00001003,
-/* 0016 */ 0x00029705,0x00001400,0x000a411e,0x00001003,
-/* 0018 */ 0x00040730,0x00001002,0x000f619e,0x00001003,
-/* 001A */ 0x00031705,0x00001400,0x000a411e,0x00001003,
-/* 001C */ 0x00040730,0x00001002,0x000f619e,0x00001003,
-/* 001E */ 0x00039705,0x00001400,0x000a411e,0x00001003,
-/* 0020 */ 0x000fe19e,0x00001003,0x0009c730,0x00001003,
-/* 0022 */ 0x0008e19c,0x00001003,0x000083c1,0x00093040,
-/* 0024 */ 0x00098730,0x00001002,0x000ee19e,0x00001003,
-/* 0026 */ 0x00009705,0x00001400,0x000a211e,0x00001003,
-/* 0028 */ 0x00098730,0x00001002,0x000ee19e,0x00001003,
-/* 002A */ 0x00011705,0x00001400,0x000a211e,0x00001003,
-/* 002C */ 0x00098730,0x00001002,0x000ee19e,0x00001003,
-/* 002E */ 0x00019705,0x00001400,0x000a211e,0x00001003,
-/* 0030 */ 0x00098730,0x00001002,0x000ee19e,0x00001003,
-/* 0032 */ 0x00021705,0x00001400,0x000a211e,0x00001003,
-/* 0034 */ 0x00098730,0x00001002,0x000ee19e,0x00001003,
-/* 0036 */ 0x00029705,0x00001400,0x000a211e,0x00001003,
-/* 0038 */ 0x00098730,0x00001002,0x000ee19e,0x00001003,
-/* 003A */ 0x00031705,0x00001400,0x000a211e,0x00001003,
-/* 003C */ 0x00098730,0x00001002,0x000ee19e,0x00001003,
-/* 003E */ 0x00039705,0x00001400,0x000a211e,0x00001003,
-/* 0040 */ 0x0001a730,0x00001008,0x000e2730,0x00001002,
-/* 0042 */ 0x0000a731,0x00001002,0x0000a731,0x00001002,
-/* 0044 */ 0x0000a731,0x00001002,0x0000a731,0x00001002,
-/* 0046 */ 0x0000a731,0x00001002,0x0000a731,0x00001002,
-/* 0048 */ 0x00000000,0x00000000,0x000f619c,0x00001003,
-/* 004A */ 0x0007f801,0x000c0000,0x00000037,0x00001000,
-/* 004C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 004E */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0050 */ 0x00000000,0x000c0000,0x00000000,0x00000000,
-/* 0052 */ 0x0000373c,0x00001000,0x00000000,0x00000000,
-/* 0054 */ 0x000ee19c,0x00001003,0x0007f801,0x000c0000,
-/* 0056 */ 0x00000037,0x00001000,0x00000000,0x00000000,
-/* 0058 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 005A */ 0x00000000,0x00000000,0x0000273c,0x00001000,
-/* 005C */ 0x00000033,0x00001000,0x000e679e,0x00001003,
-/* 005E */ 0x00007705,0x00001400,0x000ac71e,0x00001003,
-/* 0060 */ 0x00087fc1,0x000c3be0,0x0007f801,0x000c0000,
-/* 0062 */ 0x00000037,0x00001000,0x00000000,0x00000000,
-/* 0064 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0066 */ 0x00000000,0x00000000,0x0000a730,0x00001003,
-/* 0068 */ 0x00000033,0x00001000,0x0007f801,0x000c0000,
-/* 006A */ 0x00000037,0x00001000,0x00000000,0x00000000,
-/* 006C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 006E */ 0x00000000,0x00000000,0x00000000,0x000c0000,
-/* 0070 */ 0x00000032,0x00001000,0x0000273d,0x00001000,
-/* 0072 */ 0x0004a730,0x00001003,0x00000f41,0x00097140,
-/* 0074 */ 0x0000a841,0x0009b240,0x0000a0c1,0x0009f040,
-/* 0076 */ 0x0001c641,0x00093540,0x0001cec1,0x0009b5c0,
-/* 0078 */ 0x00000000,0x00000000,0x0001bf05,0x0003fc40,
-/* 007A */ 0x00002725,0x000aa400,0x00013705,0x00093a00,
-/* 007C */ 0x0000002e,0x0009d6c0,0x0002ef8a,0x00000000,
-/* 007E */ 0x00040630,0x00001004,0x0004ef0a,0x000eb785,
-/* 0080 */ 0x0003fc8a,0x00000000,0x00000000,0x000c70e0,
-/* 0082 */ 0x0007d182,0x0002c640,0x00008630,0x00001004,
-/* 0084 */ 0x000799b8,0x0002c6c0,0x00031705,0x00092240,
-/* 0086 */ 0x00039f05,0x000932c0,0x0003520a,0x00000000,
-/* 0088 */ 0x00070731,0x0000100b,0x00010705,0x000b20c0,
-/* 008A */ 0x00000000,0x000eba44,0x00032108,0x000c60c4,
-/* 008C */ 0x00065208,0x000c2917,0x000486b0,0x00001007,
-/* 008E */ 0x00012f05,0x00036880,0x0002818e,0x000c0000,
-/* 0090 */ 0x0004410a,0x00000000,0x00048630,0x00001007,
-/* 0092 */ 0x00029705,0x000c0000,0x00000000,0x00000000,
-/* 0094 */ 0x00003fc1,0x0003fc40,0x000037c1,0x00091b40,
-/* 0096 */ 0x00003fc1,0x000911c0,0x000037c1,0x000957c0,
-/* 0098 */ 0x00003fc1,0x000951c0,0x000037c1,0x00000000,
-/* 009A */ 0x00003fc1,0x000991c0,0x000037c1,0x00000000,
-/* 009C */ 0x00003fc1,0x0009d1c0,0x000037c1,0x00000000,
-/* 009E */ 0x0001ccc1,0x000915c0,0x0001c441,0x0009d800,
-/* 00A0 */ 0x0009cdc1,0x00091240,0x0001c541,0x00091d00,
-/* 00A2 */ 0x0009cfc1,0x00095240,0x0001c741,0x00095c80,
-/* 00A4 */ 0x000e8ca9,0x00099240,0x000e85ad,0x00095640,
-/* 00A6 */ 0x00069ca9,0x00099d80,0x000e952d,0x00099640,
-/* 00A8 */ 0x000eaca9,0x0009d6c0,0x000ea5ad,0x00091a40,
-/* 00AA */ 0x0006bca9,0x0009de80,0x000eb52d,0x00095a40,
-/* 00AC */ 0x000ecca9,0x00099ac0,0x000ec5ad,0x0009da40,
-/* 00AE */ 0x000edca9,0x0009d300,0x000a6e0a,0x00001000,
-/* 00B0 */ 0x000ed52d,0x00091e40,0x000eeca9,0x00095ec0,
-/* 00B2 */ 0x000ee5ad,0x00099e40,0x0006fca9,0x00002500,
-/* 00B4 */ 0x000fb208,0x000c59a0,0x000ef52d,0x0009de40,
-/* 00B6 */ 0x00068ca9,0x000912c1,0x000683ad,0x00095241,
-/* 00B8 */ 0x00020f05,0x000991c1,0x00000000,0x00000000,
-/* 00BA */ 0x00086f88,0x00001000,0x0009cf81,0x000b5340,
-/* 00BC */ 0x0009c701,0x000b92c0,0x0009de81,0x000bd300,
-/* 00BE */ 0x0009d601,0x000b1700,0x0001fd81,0x000b9d80,
-/* 00C0 */ 0x0009f501,0x000b57c0,0x000a0f81,0x000bd740,
-/* 00C2 */ 0x00020701,0x000b5c80,0x000a1681,0x000b97c0,
-/* 00C4 */ 0x00021601,0x00002500,0x000a0701,0x000b9b40,
-/* 00C6 */ 0x000a0f81,0x000b1bc0,0x00021681,0x00002d00,
-/* 00C8 */ 0x00020f81,0x000bd800,0x000a0701,0x000b5bc0,
-/* 00CA */ 0x00021601,0x00003500,0x000a0f81,0x000b5f40,
-/* 00CC */ 0x000a0701,0x000bdbc0,0x00021681,0x00003d00,
-/* 00CE */ 0x00020f81,0x000b1d00,0x000a0701,0x000b1fc0,
-/* 00D0 */ 0x00021601,0x00020500,0x00020f81,0x000b1341,
-/* 00D2 */ 0x000a0701,0x000b9fc0,0x00021681,0x00020d00,
-/* 00D4 */ 0x00020f81,0x000bde80,0x000a0701,0x000bdfc0,
-/* 00D6 */ 0x00021601,0x00021500,0x00020f81,0x000b9341,
-/* 00D8 */ 0x00020701,0x000b53c1,0x00021681,0x00021d00,
-/* 00DA */ 0x000a0f81,0x000d0380,0x0000b601,0x000b15c0,
-/* 00DC */ 0x00007b01,0x00000000,0x00007b81,0x000bd1c0,
-/* 00DE */ 0x00007b01,0x00000000,0x00007b81,0x000b91c0,
-/* 00E0 */ 0x00007b01,0x000b57c0,0x00007b81,0x000b51c0,
-/* 00E2 */ 0x00007b01,0x000b1b40,0x00007b81,0x000b11c0,
-/* 00E4 */ 0x00087b01,0x000c3dc0,0x0007e488,0x000d7e45,
-/* 00E6 */ 0x00000000,0x000d7a44,0x0007e48a,0x00000000,
-/* 00E8 */ 0x00011f05,0x00084080,0x00000000,0x00000000,
-/* 00EA */ 0x00001705,0x000b3540,0x00008a01,0x000bf040,
-/* 00EC */ 0x00007081,0x000bb5c0,0x00055488,0x00000000,
-/* 00EE */ 0x0000d482,0x0003fc40,0x0003fc88,0x00000000,
-/* 00F0 */ 0x0001e401,0x000b3a00,0x0001ec81,0x000bd6c0,
-/* 00F2 */ 0x0002ef88,0x000e7784,0x00056f08,0x00000000,
-/* 00F4 */ 0x000d86b0,0x00001007,0x00008281,0x000bb240,
-/* 00F6 */ 0x0000b801,0x000b7140,0x00007888,0x00000000,
-/* 00F8 */ 0x0000073c,0x00001000,0x0007f188,0x000c0000,
-/* 00FA */ 0x00000000,0x00000000,0x00055288,0x000c555c,
-/* 00FC */ 0x0005528a,0x000c0000,0x0009fa88,0x000c5d00,
-/* 00FE */ 0x0000fa88,0x00000000,0x00000032,0x00001000,
-/* 0100 */ 0x0000073d,0x00001000,0x0007f188,0x000c0000,
-/* 0102 */ 0x00000000,0x00000000,0x0008c01c,0x00001003,
-/* 0104 */ 0x00002705,0x00001008,0x0008b201,0x000c1392,
-/* 0106 */ 0x0000ba01,0x00000000,
-/* TASKTREETHREAD */
-/* 0107 */ 0x00008731,0x00001400,0x0004c108,0x000fe0c4,
-/* 0109 */ 0x00057488,0x00000000,0x000a6388,0x00001001,
-/* 010B */ 0x0008b334,0x000bc141,0x0003020e,0x00000000,
-/* 010D */ 0x000986b0,0x00001008,0x00003625,0x000c5dfa,
-/* 010F */ 0x000a638a,0x00001001,0x0008020e,0x00001002,
-/* 0111 */ 0x0009a6b0,0x00001008,0x0007f301,0x00000000,
-/* 0113 */ 0x00000000,0x00000000,0x00002725,0x000a8c40,
-/* 0115 */ 0x000000ae,0x00000000,0x000e8630,0x00001008,
-/* 0117 */ 0x00000000,0x000c74e0,0x0007d182,0x0002d640,
-/* 0119 */ 0x000b8630,0x00001008,0x000799b8,0x0002d6c0,
-/* 011B */ 0x0000748a,0x000c3ec5,0x0007420a,0x000c0000,
-/* 011D */ 0x00062208,0x000c4117,0x000a0630,0x00001009,
-/* 011F */ 0x00000000,0x000c0000,0x0001022e,0x00000000,
-/* 0121 */ 0x0006a630,0x00001009,0x00000032,0x00001000,
-/* 0123 */ 0x000ca21c,0x00001003,0x00005a02,0x00000000,
-/* 0125 */ 0x0001a630,0x00001009,0x00000000,0x000c0000,
-/* 0127 */ 0x00000036,0x00001000,0x00000000,0x00000000,
-/* 0129 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 012B */ 0x00000000,0x00000000,0x0003a730,0x00001008,
-/* 012D */ 0x0007f801,0x000c0000,0x00000037,0x00001000,
-/* 012F */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0131 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0133 */ 0x0003a730,0x00001008,0x00000033,0x00001000,
-/* 0135 */ 0x0003a705,0x00001008,0x00007a01,0x000c0000,
-/* 0137 */ 0x000e6288,0x000d550a,0x0006428a,0x00000000,
-/* 0139 */ 0x00090730,0x0000100a,0x00000000,0x000c0000,
-/* 013B */ 0x00000000,0x00000000,
-/* TASKTREEHEADERCODE */
-/* 013C */ 0x0007aab0,0x00034880,0x000a8fb0,0x0000100b,
-/* 013E */ 0x00057488,0x00000000,0x00033b94,0x00081140,
-/* 0140 */ 0x000183ae,0x00000000,0x000a86b0,0x0000100b,
-/* 0142 */ 0x00022f05,0x000c3545,0x0000eb8a,0x00000000,
-/* 0144 */ 0x00042731,0x00001003,
-/* FGTASKTREEHEADERCODE */
-/* 0145 */ 0x0007aab0,0x00034880,0x00078fb0,0x0000100a,
-/* 0147 */ 0x00057488,0x00000000,0x00033b94,0x00081140,
-/* 0149 */ 0x000183ae,0x00000000,0x000b06b0,0x0000100b,
-/* 014B */ 0x00022f05,0x00000000,0x00007401,0x00091140,
-/* 014D */ 0x00048f05,0x000951c0,0x00042731,0x00001003,
-/* 014F */ 0x0000473d,0x00001000,0x000f19b0,0x000bbc47,
-/* 0151 */ 0x00080000,0x000bffc7,0x000fe19e,0x00001003,
-/* 0153 */ 0x00000000,0x00000000,0x0008e19c,0x00001003,
-/* 0155 */ 0x000083c1,0x00093040,0x00000f41,0x00097140,
-/* 0157 */ 0x0000a841,0x0009b240,0x0000a0c1,0x0009f040,
-/* 0159 */ 0x0001c641,0x00093540,0x0001cec1,0x0009b5c0,
-/* 015B */ 0x00000000,0x000fdc44,0x00055208,0x00000000,
-/* 015D */ 0x00010705,0x000a2880,0x0000a23a,0x00093a00,
-/* 015F */ 0x0003fc8a,0x000df6c5,0x0004ef0a,0x000c0000,
-/* 0161 */ 0x00012f05,0x00036880,0x00065308,0x000c2997,
-/* 0163 */ 0x000086b0,0x0000100b,0x0004410a,0x000d40c7,
-/* 0165 */ 0x00000000,0x00000000,0x00088730,0x00001004,
-/* 0167 */ 0x00056f0a,0x000ea105,0x00000000,0x00000000,
-/* NULLALGORITHM */
-/* 0169 */ 0x0000473d,0x00001000,0x000f19b0,0x000bbc47,
-/* 016B */ 0x00080000,0x000bffc7,0x0000273d,0x00001000,
-/* HFGEXECCHILD */
-/* 016D */ 0x00000000,0x000eba44,
-/* HFGEXECCHILD_98 */
-/* 016E */ 0x00048f05,0x0000f440,0x00007401,0x0000f7c0,
-/* HFGEXECCHILD_PUSH1IND */
-/* 0170 */ 0x00000734,0x00001000,0x00010705,0x000a6880,
-/* 0172 */ 0x00006a88,0x000c75c4,
-/* HFGEXECSIBLING */
-/* 0173 */ 0x00000000,0x000e5084,0x00000000,0x000eba44,
-/* HFGEXECSIBLING_298 */
-/* 0175 */ 0x00087401,0x000e4782,
-/* HFGEXECSIBLING_2IND1 */
-/* 0176 */ 0x00000734,0x00001000,0x00010705,0x000a6880,
-/* 0178 */ 0x00006a88,0x000c75c4,
-/* S16_CODECOUTPUTTASK */
-/* 0179 */ 0x0007c108,0x000c0000,0x0007e721,0x000bed40,
-/* 017B */ 0x00005f25,0x000badc0,0x0003ba97,0x000beb80,
-/* 017D */ 0x00065590,0x000b2e00,0x00033217,0x00003ec0,
-/* 017F */ 0x00065590,0x000b8e40,0x0003ed80,0x000491c0,
-/* 0181 */ 0x00073fb0,0x00074c80,0x000583a0,0x0000100c,
-/* 0183 */ 0x000ee388,0x00042970,0x00008301,0x00021ef2,
-/* 0185 */ 0x000b8f14,0x0000000f,0x000c4d8d,0x0000001b,
-/* 0187 */ 0x000d6dc2,0x000e06c6,0x000032ac,0x000c3916,
-/* 0189 */ 0x0004edc2,0x00074c80,0x00078898,0x00001000,
-/* 018B */ 0x00038894,0x00000032,0x000c4d8d,0x00092e1b,
-/* 018D */ 0x000d6dc2,0x000e06c6,0x0004edc2,0x000c1956,
-/* 018F */ 0x0000722c,0x00034a00,0x00041705,0x0009ed40,
-/* 0191 */ 0x00058730,0x00001400,0x000d7488,0x000c3a00,
-/* 0193 */ 0x00048f05,0x00000000
-};
-/* #CODE_END */
-
-static u32 cwc4630_parameter[] = {
-/* 0000 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0004 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0008 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 000C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0010 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0014 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0018 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 001C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0020 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0024 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0028 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 002C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0030 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0034 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0038 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 003C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0040 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0044 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0048 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 004C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0050 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0054 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0058 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 005C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0060 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0064 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0068 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 006C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0070 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0074 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0078 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 007C */ 0x00000000,0x00000000,0x00000000,0x00000000
-}; /* #PARAMETER_END */
-
-
-static struct dsp_segment_desc cwc4630_segments[] = {
-  { SEGTYPE_SP_PROGRAM, 0x00000000, 0x00000328, cwc4630_code },
-  { SEGTYPE_SP_PARAMETER, 0x00000000, 0x00000080, cwc4630_parameter },
-};
-
-static struct dsp_module_desc cwc4630_module = {
-  "cwc4630",
-  {
-    38,
-    cwc4630_symbols
-  },
-  2,
-  cwc4630_segments,
-};
-
-#endif /* __HEADER_cwc4630_H__ */

sound/pci/cs46xx/imgs/cwcasync.h

@@ -1,176 +0,0 @@
-/* generated from cwcasync.osp DO NOT MODIFY */
-
-#ifndef __HEADER_cwcasync_H__
-#define __HEADER_cwcasync_H__
-
-static struct dsp_symbol_entry cwcasync_symbols[] = {
-  { 0x8000, "EXECCHILD",0x03 },
-  { 0x8001, "EXECCHILD_98",0x03 },
-  { 0x8003, "EXECCHILD_PUSH1IND",0x03 },
-  { 0x8008, "EXECSIBLING",0x03 },
-  { 0x800a, "EXECSIBLING_298",0x03 },
-  { 0x800b, "EXECSIBLING_2IND1",0x03 },
-  { 0x8010, "TIMINGMASTER",0x03 },
-  { 0x804f, "S16_CODECINPUTTASK",0x03 },
-  { 0x805e, "PCMSERIALINPUTTASK",0x03 },
-  { 0x806d, "S16_MIX_TO_OSTREAM",0x03 },
-  { 0x809a, "S16_MIX",0x03 },
-  { 0x80bb, "S16_UPSRC",0x03 },
-  { 0x813b, "MIX3_EXP",0x03 },
-  { 0x8164, "DECIMATEBYPOW2",0x03 },
-  { 0x8197, "VARIDECIMATE",0x03 },
-  { 0x81f2, "_3DINPUTTASK",0x03 },
-  { 0x820a, "_3DPRLGCINPTASK",0x03 },
-  { 0x8227, "_3DSTEREOINPUTTASK",0x03 },
-  { 0x8242, "_3DOUTPUTTASK",0x03 },
-  { 0x82c4, "HRTF_MORPH_TASK",0x03 },
-  { 0x82c6, "WAIT4DATA",0x03 },
-  { 0x82fa, "PROLOGIC",0x03 },
-  { 0x8496, "DECORRELATOR",0x03 },
-  { 0x84a4, "STEREO2MONO",0x03 },
-  { 0x0000, "OVERLAYBEGINADDRESS",0x00 },
-  { 0x0000, "SPIOWRITE",0x03 },
-  { 0x000d, "S16_ASYNCCODECINPUTTASK",0x03 },
-  { 0x0043, "SPDIFITASK",0x03 },
-  { 0x007b, "SPDIFOTASK",0x03 },
-  { 0x0097, "ASYNCHFGTXCODE",0x03 },
-  { 0x00be, "ASYNCHFGRXCODE",0x03 },
-  { 0x00db, "#CODE_END",0x00 },
-}; /* cwcasync symbols */
-
-static u32 cwcasync_code[] = {
-/* OVERLAYBEGINADDRESS */
-/* 0000 */ 0x00002731,0x00001400,0x00003725,0x000a8440,
-/* 0002 */ 0x000000ae,0x00000000,0x00060630,0x00001000,
-/* 0004 */ 0x00000000,0x000c7560,0x00075282,0x0002d640,
-/* 0006 */ 0x00021705,0x00000000,0x00072ab8,0x0002d6c0,
-/* 0008 */ 0x00020630,0x00001000,0x000c74c2,0x000d4b82,
-/* 000A */ 0x000475c2,0x00000000,0x0003430a,0x000c0000,
-/* 000C */ 0x00042730,0x00001400,
-/* S16_ASYNCCODECINPUTTASK */
-/* 000D */ 0x0006a108,0x000cf2c4,0x0004f4c0,0x00000000,
-/* 000F */ 0x000fa418,0x0000101f,0x0005d402,0x0001c500,
-/* 0011 */ 0x000f0630,0x00001000,0x00004418,0x00001380,
-/* 0013 */ 0x000e243d,0x000d394a,0x00049705,0x00000000,
-/* 0015 */ 0x0007d530,0x000b4240,0x000e00f2,0x00001000,
-/* 0017 */ 0x00009134,0x000ca20a,0x00004c90,0x00001000,
-/* 0019 */ 0x0005d705,0x00000000,0x00004f25,0x00098240,
-/* 001B */ 0x00004725,0x00000000,0x0000e48a,0x00000000,
-/* 001D */ 0x00027295,0x0009c2c0,0x0003df25,0x00000000,
-/* 001F */ 0x000e8030,0x00001001,0x0005f718,0x000ac600,
-/* 0021 */ 0x0007cf30,0x000c2a01,0x00082630,0x00001001,
-/* 0023 */ 0x000504a0,0x00001001,0x00029314,0x000bcb80,
-/* 0025 */ 0x0003cf25,0x000b0e00,0x0004f5c0,0x00000000,
-/* 0027 */ 0x00049118,0x000d888a,0x0007dd02,0x000c6efa,
-/* 0029 */ 0x00000000,0x00000000,0x0004f5c0,0x00069c80,
-/* 002B */ 0x0000d402,0x00000000,0x000e8630,0x00001001,
-/* 002D */ 0x00079130,0x00000000,0x00049118,0x00090e00,
-/* 002F */ 0x0006c10a,0x00000000,0x00000000,0x000c0000,
-/* 0031 */ 0x0007cf30,0x00030580,0x00005725,0x00000000,
-/* 0033 */ 0x000d84a0,0x00001001,0x00029314,0x000b4780,
-/* 0035 */ 0x0003cf25,0x000b8600,0x00000000,0x00000000,
-/* 0037 */ 0x00000000,0x000c0000,0x00000000,0x00042c80,
-/* 0039 */ 0x0001dec1,0x000e488c,0x00031114,0x00000000,
-/* 003B */ 0x0004f5c2,0x00000000,0x0003640a,0x00000000,
-/* 003D */ 0x00000000,0x000e5084,0x00000000,0x000eb844,
-/* 003F */ 0x00007001,0x00000000,0x00000734,0x00001000,
-/* 0041 */ 0x00010705,0x000a6880,0x00006a88,0x000c75c4,
-/* SPDIFITASK */
-/* 0043 */ 0x0006a108,0x000cf2c4,0x0004f4c0,0x000d5384,
-/* 0045 */ 0x0007e48a,0x00000000,0x00067718,0x00001000,
-/* 0047 */ 0x0007a418,0x00001000,0x0007221a,0x00000000,
-/* 0049 */ 0x0005d402,0x00014500,0x000b8630,0x00001002,
-/* 004B */ 0x00004418,0x00001780,0x000e243d,0x000d394a,
-/* 004D */ 0x00049705,0x00000000,0x0007d530,0x000b4240,
-/* 004F */ 0x000ac0f2,0x00001002,0x00014414,0x00000000,
-/* 0051 */ 0x00004c90,0x00001000,0x0005d705,0x00000000,
-/* 0053 */ 0x00004f25,0x00098240,0x00004725,0x00000000,
-/* 0055 */ 0x0000e48a,0x00000000,0x00027295,0x0009c2c0,
-/* 0057 */ 0x0007df25,0x00000000,0x000ac030,0x00001003,
-/* 0059 */ 0x0005f718,0x000fe798,0x00029314,0x000bcb80,
-/* 005B */ 0x00000930,0x000b0e00,0x0004f5c0,0x000de204,
-/* 005D */ 0x000884a0,0x00001003,0x0007cf25,0x000e3560,
-/* 005F */ 0x00049118,0x00000000,0x00049118,0x000d888a,
-/* 0061 */ 0x0007dd02,0x000c6efa,0x0000c434,0x00030040,
-/* 0063 */ 0x000fda82,0x000c2312,0x000fdc0e,0x00001001,
-/* 0065 */ 0x00083402,0x000c2b92,0x000706b0,0x00001003,
-/* 0067 */ 0x00075a82,0x00000000,0x0000d625,0x000b0940,
-/* 0069 */ 0x0000840e,0x00001002,0x0000aabc,0x000c511e,
-/* 006B */ 0x00078730,0x00001003,0x0000aaf4,0x000e910a,
-/* 006D */ 0x0004628a,0x00000000,0x00006aca,0x00000000,
-/* 006F */ 0x00000930,0x00000000,0x0004f5c0,0x00069c80,
-/* 0071 */ 0x00046ac0,0x00000000,0x0003c40a,0x000fc898,
-/* 0073 */ 0x00049118,0x00090e00,0x0006c10a,0x00000000,
-/* 0075 */ 0x00000000,0x000e5084,0x00000000,0x000eb844,
-/* 0077 */ 0x00007001,0x00000000,0x00000734,0x00001000,
-/* 0079 */ 0x00010705,0x000a6880,0x00006a88,0x000c75c4,
-/* SPDIFOTASK */
-/* 007B */ 0x0006a108,0x000c0000,0x0004f4c0,0x000c3245,
-/* 007D */ 0x0000a418,0x00001000,0x0003a20a,0x00000000,
-/* 007F */ 0x00004418,0x00001380,0x000e243d,0x000d394a,
-/* 0081 */ 0x000c9705,0x000def92,0x0008c030,0x00001004,
-/* 0083 */ 0x0005f718,0x000fe798,0x00000000,0x000c0000,
-/* 0085 */ 0x00005725,0x00000000,0x000704a0,0x00001004,
-/* 0087 */ 0x00029314,0x000b4780,0x0003cf25,0x000b8600,
-/* 0089 */ 0x00000000,0x00000000,0x00000000,0x000c0000,
-/* 008B */ 0x00000000,0x00042c80,0x0001dec1,0x000e488c,
-/* 008D */ 0x00031114,0x00000000,0x0004f5c2,0x00000000,
-/* 008F */ 0x0004a918,0x00098600,0x0006c28a,0x00000000,
-/* 0091 */ 0x00000000,0x000e5084,0x00000000,0x000eb844,
-/* 0093 */ 0x00007001,0x00000000,0x00000734,0x00001000,
-/* 0095 */ 0x00010705,0x000a6880,0x00006a88,0x000c75c4,
-/* ASYNCHFGTXCODE */
-/* 0097 */ 0x0002a880,0x000b4e40,0x00042214,0x000e5548,
-/* 0099 */ 0x000542bf,0x00000000,0x00000000,0x000481c0,
-/* 009B */ 0x00000000,0x00000000,0x00000000,0x00000030,
-/* 009D */ 0x0000072d,0x000fbf8a,0x00077f94,0x000ea7df,
-/* 009F */ 0x0002ac95,0x000d3145,0x00002731,0x00001400,
-/* 00A1 */ 0x00006288,0x000c71c4,0x00014108,0x000e6044,
-/* 00A3 */ 0x00035408,0x00000000,0x00025418,0x000a0ec0,
-/* 00A5 */ 0x0001443d,0x000ca21e,0x00046595,0x000d730c,
-/* 00A7 */ 0x0006538e,0x00000000,0x00064630,0x00001005,
-/* 00A9 */ 0x000e7b0e,0x000df782,0x000746b0,0x00001005,
-/* 00AB */ 0x00036f05,0x000c0000,0x00043695,0x000d598c,
-/* 00AD */ 0x0005331a,0x000f2185,0x00000000,0x00000000,
-/* 00AF */ 0x000007ae,0x000bdb00,0x00040630,0x00001400,
-/* 00B1 */ 0x0005e708,0x000c0000,0x0007ef30,0x000b1c00,
-/* 00B3 */ 0x000d86a0,0x00001005,0x00066408,0x000c0000,
-/* 00B5 */ 0x00000000,0x00000000,0x00021843,0x00000000,
-/* 00B7 */ 0x00000cac,0x00062c00,0x00001dac,0x00063400,
-/* 00B9 */ 0x00002cac,0x0006cc80,0x000db943,0x000e5ca1,
-/* 00BB */ 0x00000000,0x00000000,0x0006680a,0x000f3205,
-/* 00BD */ 0x00042730,0x00001400,
-/* ASYNCHFGRXCODE */
-/* 00BE */ 0x00014108,0x000f2204,0x00025418,0x000a2ec0,
-/* 00C0 */ 0x00015dbd,0x00038100,0x00015dbc,0x00000000,
-/* 00C2 */ 0x0005e415,0x00034880,0x0001258a,0x000d730c,
-/* 00C4 */ 0x0006538e,0x000baa40,0x00060630,0x00001006,
-/* 00C6 */ 0x00067b0e,0x000ac380,0x0003ef05,0x00000000,
-/* 00C8 */ 0x0000f734,0x0001c300,0x000586b0,0x00001400,
-/* 00CA */ 0x000b6f05,0x000c3a00,0x00048f05,0x00000000,
-/* 00CC */ 0x0005b695,0x0008c380,0x0002058e,0x00000000,
-/* 00CE */ 0x000500b0,0x00001400,0x0002b318,0x000e998d,
-/* 00D0 */ 0x0006430a,0x00000000,0x00000000,0x000ef384,
-/* 00D2 */ 0x00004725,0x000c0000,0x00000000,0x000f3204,
-/* 00D4 */ 0x00004f25,0x000c0000,0x00080000,0x000e5ca1,
-/* 00D6 */ 0x000cb943,0x000e5ca1,0x0004b943,0x00000000,
-/* 00D8 */ 0x00040730,0x00001400,0x000cb943,0x000e5ca1,
-/* 00DA */ 0x0004b943,0x00000000
-};
-/* #CODE_END */
-
-static struct dsp_segment_desc cwcasync_segments[] = {
-  { SEGTYPE_SP_PROGRAM, 0x00000000, 0x000001b6, cwcasync_code },
-};
-
-static struct dsp_module_desc cwcasync_module = {
-  "cwcasync",
-  {
-    32,
-    cwcasync_symbols
-  },
-  1,
-  cwcasync_segments,
-};
-
-#endif /* __HEADER_cwcasync_H__ */

sound/pci/cs46xx/imgs/cwcbinhack.h

@@ -1,48 +0,0 @@
-/* generated by Benny 
-   MODIFY ON YOUR OWN RISK */
-
-#ifndef __HEADER_cwcbinhack_H__
-#define __HEADER_cwcbinhack_H__
-
-static struct dsp_symbol_entry cwcbinhack_symbols[] = {
-  { 0x02c8, "OVERLAYBEGINADDRESS",0x00 },
-  { 0x02c8, "MAGICSNOOPTASK",0x03 },
-  { 0x0308, "#CODE_END",0x00 },
-}; /* cwcbinhack symbols */
-
-static u32 cwcbinhack_code[] = {
-  /* 0x02c8 */
-  0x0007bfb0,0x000bc240,0x00000c2e,0x000c6084, /* 1 */
-  0x000b8630,0x00001016,0x00006408,0x000efb84, /* 2 */
-  0x00016008,0x00000000,0x0001c088,0x000c0000, /* 3 */
-  0x000fc908,0x000e3392,0x0005f488,0x000efb84, /* 4 */
-  0x0001d402,0x000b2e00,0x0003d418,0x00001000, /* 5 */
-  0x0008d574,0x000c4293,0x00065625,0x000ea30e, /* 6 */
-  0x00096c01,0x000c6f92,0x0001a58a,0x000c6085, /* 7 */
-  0x00002f43,0x00000000,0x000e03a0,0x00001016, /* 8 */
-  0x0005e608,0x000c0000,0x00000000,0x00000000, /* 9 */
-  0x000ca108,0x000dcca1,0x00003bac,0x000c3205, /* 10 */
-  0x00073843,0x00000000,0x00010730,0x00001017, /* 11 */
-  0x0001600a,0x000c0000,0x00057488,0x00000000, /* 12 */
-  0x00000000,0x000e5084,0x00000000,0x000eba44, /* 13 */
-  0x00087401,0x000e4782,0x00000734,0x00001000, /* 14 */
-  0x00010705,0x000a6880,0x00006a88,0x000c75c4, /* 15 */
-  0x00000000,0x00000000,0x00000000,0x00000000, /* 16 */
-};
-/* #CODE_END */
-
-static struct dsp_segment_desc cwcbinhack_segments[] = {
-  { SEGTYPE_SP_PROGRAM, 0x00000000, 64, cwcbinhack_code },
-};
-
-static struct dsp_module_desc cwcbinhack_module = {
-  "cwcbinhack",
-  {
-    3,
-    cwcbinhack_symbols
-  },
-  1,
-  cwcbinhack_segments,
-};
-
-#endif /* __HEADER_cwcbinhack_H__ */

sound/pci/cs46xx/imgs/cwcdma.asp

@@ -1,170 +0,0 @@
-// 
-//  Copyright(c) by Benny Sjostrand (benny@hostmobility.com)
-//
-//  This program is free software; you can redistribute it and/or modify
-//  it under the terms of the GNU General Public License as published by
-//  the Free Software Foundation; either version 2 of the License, or
-//  (at your option) any later version.
-//
-//  This program is distributed in the hope that it will be useful,
-//  but WITHOUT ANY WARRANTY; without even the implied warranty of
-//  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-//  GNU General Public License for more details.
-//
-//  You should have received a copy of the GNU General Public License
-//  along with this program; if not, write to the Free Software
-//  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
-//
-
-
-//
-// This code runs inside the DSP (cs4610, cs4612, cs4624, or cs4630),
-// to compile it you need a tool named SPASM 3.0 and DSP code owned by 
-// Cirrus Logic(R). The SPASM program will generate a object file (cwcdma.osp),
-// the "ospparser"  tool will genereate the cwcdma.h file it's included from
-// the cs46xx_lib.c file.
-//
-//
-// The purpose of this code is very simple: make it possible to tranfser
-// the samples 'as they are' with no alteration from a PCMreader
-// SCB (DMA from host) to any other SCB. This is useful for AC3 through SPDIF.
-// SRC (source rate converters) task always alters the samples in somehow,
-// however it's from 48khz -> 48khz.
-// The alterations are not audible, but AC3 wont work. 
-//
-//        ...
-//         |
-// +---------------+
-// | AsynchFGTxSCB |
-// +---------------+
-//        |
-//    subListPtr
-//        |
-// +--------------+
-// |   DMAReader  |
-// +--------------+
-//        |
-//    subListPtr
-//        |
-// +-------------+
-// | PCMReader   |
-// +-------------+
-// (DMA from host)
-//
-
-struct dmaSCB
-  {
-    long  dma_reserved1[3];
-
-    short dma_reserved2:dma_outBufPtr;
-
-    short dma_unused1:dma_unused2;
-
-    long  dma_reserved3[4];
-
-    short dma_subListPtr:dma_nextSCB;
-    short dma_SPBptr:dma_entryPoint;
-
-    long  dma_strmRsConfig;
-    long  dma_strmBufPtr;
-
-    long  dma_reserved4;
-
-    VolumeControl s2m_volume;
-  };
-
-#export DMAReader
-void DMAReader()
-{
-  execChild();
-  r2 = r0->dma_subListPtr;
-  r1 = r0->nextSCB;
-	
-  rsConfig01 = r2->strmRsConfig;
-  // Load rsConfig for input buffer
-
-  rsDMA01 = r2->basicReq.daw,       ,                   tb = Z(0 - rf);
-  // Load rsDMA in case input buffer is a DMA buffer    Test to see if there is any data to transfer
-
-  if (tb) goto execSibling_2ind1 after {
-      r5 = rf + (-1);
-      r6 = r1->dma_entryPoint;           // r6 = entry point of sibling task
-      r1 = r1->dma_SPBptr,               // r1 = pointer to sibling task's SPB
-          ,   ind = r6;                  // Load entry point of sibling task
-  }
-
-  rsConfig23 = r0->dma_strmRsConfig;
-  // Load rsConfig for output buffer (never a DMA buffer)
-
-  r4 = r0->dma_outBufPtr;
-
-  rsa0 = r2->strmBufPtr;
-  // rsa0 = input buffer pointer                        
-
-  for (i = r5; i >= 0; --i)
-    after {
-      rsa2 = r4;
-      // rsa2 = output buffer pointer
-
-      nop;
-      nop;
-    }
-  //*****************************
-  // TODO: cycles to this point *
-  //*****************************
-    {
-      acc0 =  (rsd0 = *rsa0++1);
-      // get sample
-
-      nop;  // Those "nop"'s are really uggly, but there's
-      nop;  // something with DSP's pipelines which I don't
-      nop;  // understand, resulting this code to fail without
-            // having those "nop"'s (Benny)
-
-      rsa0?reqDMA = r2;
-      // Trigger DMA transfer on input stream, 
-      // if needed to replenish input buffer
-
-      nop;
-      // Yet another magic "nop" to make stuff work
-
-      ,,r98 = acc0 $+>> 0;
-      // store sample in ALU
-
-      nop;
-      // latency on load register.
-      // (this one is understandable)
-
-      *rsa2++1 = r98;
-      // store sample in output buffer
-
-      nop; // The same story
-      nop; // as above again ...
-      nop;
-    }
-  // TODO: cycles per loop iteration
-
-  r2->strmBufPtr = rsa0,,   ;
-  // Update the modified buffer pointers
-
-  r4 = rsa2;
-  // Load output pointer position into r4
-
-  r2 = r0->nextSCB;
-  // Sibling task
-
-  goto execSibling_2ind1 // takes 6 cycles
-    after {
-      r98 = r2->thisSPB:entryPoint;
-      // Load child routine entry and data address 
-
-      r1 = r9;
-      // r9 is r2->thisSPB
-
-      r0->dma_outBufPtr = r4,,
-      // Store updated output buffer pointer
-
-      ind = r8;
-      // r8 is r2->entryPoint
-    }
-}

sound/pci/cs46xx/imgs/cwcdma.h

@@ -1,68 +0,0 @@
-/* generated from cwcdma.osp DO NOT MODIFY */
-
-#ifndef __HEADER_cwcdma_H__
-#define __HEADER_cwcdma_H__
-
-static struct dsp_symbol_entry cwcdma_symbols[] = {
-  { 0x8000, "EXECCHILD",0x03 },
-  { 0x8001, "EXECCHILD_98",0x03 },
-  { 0x8003, "EXECCHILD_PUSH1IND",0x03 },
-  { 0x8008, "EXECSIBLING",0x03 },
-  { 0x800a, "EXECSIBLING_298",0x03 },
-  { 0x800b, "EXECSIBLING_2IND1",0x03 },
-  { 0x8010, "TIMINGMASTER",0x03 },
-  { 0x804f, "S16_CODECINPUTTASK",0x03 },
-  { 0x805e, "PCMSERIALINPUTTASK",0x03 },
-  { 0x806d, "S16_MIX_TO_OSTREAM",0x03 },
-  { 0x809a, "S16_MIX",0x03 },
-  { 0x80bb, "S16_UPSRC",0x03 },
-  { 0x813b, "MIX3_EXP",0x03 },
-  { 0x8164, "DECIMATEBYPOW2",0x03 },
-  { 0x8197, "VARIDECIMATE",0x03 },
-  { 0x81f2, "_3DINPUTTASK",0x03 },
-  { 0x820a, "_3DPRLGCINPTASK",0x03 },
-  { 0x8227, "_3DSTEREOINPUTTASK",0x03 },
-  { 0x8242, "_3DOUTPUTTASK",0x03 },
-  { 0x82c4, "HRTF_MORPH_TASK",0x03 },
-  { 0x82c6, "WAIT4DATA",0x03 },
-  { 0x82fa, "PROLOGIC",0x03 },
-  { 0x8496, "DECORRELATOR",0x03 },
-  { 0x84a4, "STEREO2MONO",0x03 },
-  { 0x0000, "OVERLAYBEGINADDRESS",0x00 },
-  { 0x0000, "DMAREADER",0x03 },
-  { 0x0018, "#CODE_END",0x00 },
-}; /* cwcdma symbols */
-
-static u32 cwcdma_code[] = {
-/* OVERLAYBEGINADDRESS */
-/* 0000 */ 0x00002731,0x00001400,0x0004c108,0x000e5044,
-/* 0002 */ 0x0005f608,0x00000000,0x000007ae,0x000be300,
-/* 0004 */ 0x00058630,0x00001400,0x0007afb0,0x000e9584,
-/* 0006 */ 0x00007301,0x000a9840,0x0005e708,0x000cd104,
-/* 0008 */ 0x00067008,0x00000000,0x000902a0,0x00001000,
-/* 000A */ 0x00012a01,0x000c0000,0x00000000,0x00000000,
-/* 000C */ 0x00021843,0x000c0000,0x00000000,0x000c0000,
-/* 000E */ 0x0000e101,0x000c0000,0x00000cac,0x00000000,
-/* 0010 */ 0x00080000,0x000e5ca1,0x00000000,0x000c0000,
-/* 0012 */ 0x00000000,0x00000000,0x00000000,0x00092c00,
-/* 0014 */ 0x000122c1,0x000e5084,0x00058730,0x00001400,
-/* 0016 */ 0x000d7488,0x000e4782,0x00007401,0x0001c100
-};
-
-/* #CODE_END */
-
-static struct dsp_segment_desc cwcdma_segments[] = {
-  { SEGTYPE_SP_PROGRAM, 0x00000000, 0x00000030, cwcdma_code },
-};
-
-static struct dsp_module_desc cwcdma_module = {
-  "cwcdma",
-  {
-    27,
-    cwcdma_symbols
-  },
-  1,
-  cwcdma_segments,
-};
-
-#endif /* __HEADER_cwcdma_H__ */

sound/pci/cs46xx/imgs/cwcsnoop.h

@@ -1,46 +0,0 @@
-/* generated from cwcsnoop.osp DO NOT MODIFY */
-
-#ifndef __HEADER_cwcsnoop_H__
-#define __HEADER_cwcsnoop_H__
-
-static struct dsp_symbol_entry cwcsnoop_symbols[] = {
-  { 0x0500, "OVERLAYBEGINADDRESS",0x00 },
-  { 0x0500, "OUTPUTSNOOP",0x03 },
-  { 0x051f, "#CODE_END",0x00 },
-}; /* cwcsnoop symbols */
-
-static u32 cwcsnoop_code[] = {
-/* 0000 */ 0x0007bfb0,0x000b4e40,0x0007c088,0x000c0617,
-/* 0002 */ 0x00049705,0x00000000,0x00080630,0x00001028,
-/* 0004 */ 0x00076408,0x000efb84,0x00066008,0x00000000,
-/* 0006 */ 0x0007c908,0x000c0000,0x00046725,0x000efa44,
-/* 0008 */ 0x0005f708,0x00000000,0x0001d402,0x000b2e00,
-/* 000A */ 0x0003d418,0x00001000,0x0008d574,0x000c4293,
-/* 000C */ 0x00065625,0x000ea30e,0x00096c01,0x000c6f92,
-/* 000E */ 0x0006a58a,0x000f6085,0x00002f43,0x00000000,
-/* 0010 */ 0x000a83a0,0x00001028,0x0005e608,0x000c0000,
-/* 0012 */ 0x00000000,0x00000000,0x000ca108,0x000dcca1,
-/* 0014 */ 0x00003bac,0x000fb205,0x00073843,0x00000000,
-/* 0016 */ 0x000d8730,0x00001028,0x0006600a,0x000c0000,
-/* 0018 */ 0x00057488,0x00000000,0x00000000,0x000e5084,
-/* 001A */ 0x00000000,0x000eba44,0x00087401,0x000e4782,
-/* 001C */ 0x00000734,0x00001000,0x00010705,0x000a6880,
-/* 001E */ 0x00006a88,0x000c75c4
-};
-/* #CODE_END */
-
-static struct dsp_segment_desc cwcsnoop_segments[] = {
-  { SEGTYPE_SP_PROGRAM, 0x00000000, 0x0000003e, cwcsnoop_code },
-};
-
-static struct dsp_module_desc cwcsnoop_module = {
-  "cwcsnoop",
-  {
-    3,
-    cwcsnoop_symbols
-  },
-  1,
-  cwcsnoop_segments,
-};
-
-#endif /* __HEADER_cwcsnoop_H__ */

sound/pci/cs5535audio/cs5535audio.c

@@ -253,7 +253,7 @@ static irqreturn_t snd_cs5535audio_interrupt(int irq, void *dev_id)
 static int snd_cs5535audio_free(struct cs5535audio *cs5535au)
 {
 	synchronize_irq(cs5535au->irq);
-	pci_set_power_state(cs5535au->pci, 3);
+	pci_set_power_state(cs5535au->pci, PCI_D3hot);
 
 	if (cs5535au->irq >= 0)
 		free_irq(cs5535au->irq, cs5535au);

sound/pci/ctxfi/ctatc.c

@@ -435,6 +435,11 @@ atc_pcm_playback_position(struct ct_atc *atc, struct ct_atc_pcm *apcm)
 		return 0;
 	position = src->ops->get_ca(src);
 
+	if (position < apcm->vm_block->addr) {
+		snd_printdd("ctxfi: bad ca - ca=0x%08x, vba=0x%08x, vbs=0x%08x\n", position, apcm->vm_block->addr, apcm->vm_block->size);
+		position = apcm->vm_block->addr;
+	}
+
 	size = apcm->vm_block->size;
 	max_cisz = src->multi * src->rsc.msr;
 	max_cisz = 128 * (max_cisz < 8 ? max_cisz : 8);

sound/pci/es1968.c

@@ -1422,7 +1422,7 @@ static void snd_es1968_free_dmabuf(struct es1968 *chip)
 
 	if (! chip->dma.area)
 		return;
-	snd_dma_reserve_buf(&chip->dma, snd_dma_pci_buf_id(chip->pci));
+	snd_dma_free_pages(&chip->dma);
 	while ((p = chip->buf_list.next) != &chip->buf_list) {
 		struct esm_memory *chunk = list_entry(p, struct esm_memory, list);
 		list_del(p);
@@ -1438,20 +1438,18 @@ snd_es1968_init_dmabuf(struct es1968 *chip)
 
 	chip->dma.dev.type = SNDRV_DMA_TYPE_DEV;
 	chip->dma.dev.dev = snd_dma_pci_data(chip->pci);
-	if (! snd_dma_get_reserved_buf(&chip->dma, snd_dma_pci_buf_id(chip->pci))) {
+	err = snd_dma_alloc_pages_fallback(SNDRV_DMA_TYPE_DEV,
-		err = snd_dma_alloc_pages_fallback(SNDRV_DMA_TYPE_DEV,
+					   snd_dma_pci_data(chip->pci),
-						   snd_dma_pci_data(chip->pci),
+					   chip->total_bufsize, &chip->dma);
-						   chip->total_bufsize, &chip->dma);
+	if (err < 0 || ! chip->dma.area) {
-		if (err < 0 || ! chip->dma.area) {
+		snd_printk(KERN_ERR "es1968: can't allocate dma pages for size %d\n",
-			snd_printk(KERN_ERR "es1968: can't allocate dma pages for size %d\n",
+			   chip->total_bufsize);
-				   chip->total_bufsize);
+		return -ENOMEM;
-			return -ENOMEM;
+	}
-		}
+	if ((chip->dma.addr + chip->dma.bytes - 1) & ~((1 << 28) - 1)) {
-		if ((chip->dma.addr + chip->dma.bytes - 1) & ~((1 << 28) - 1)) {
+		snd_dma_free_pages(&chip->dma);
-			snd_dma_free_pages(&chip->dma);
+		snd_printk(KERN_ERR "es1968: DMA buffer beyond 256MB.\n");
-			snd_printk(KERN_ERR "es1968: DMA buffer beyond 256MB.\n");
+		return -ENOMEM;
-			return -ENOMEM;
-		}
 	}
 
 	INIT_LIST_HEAD(&chip->buf_list);

sound/pci/hda/Kconfig

@@ -87,69 +87,54 @@ config SND_HDA_PATCH_LOADER
 	  This option turns on hwdep and reconfig features automatically.
 
 config SND_HDA_CODEC_REALTEK
-	bool "Build Realtek HD-audio codec support"
+	tristate "Build Realtek HD-audio codec support"
-	default y
 	select SND_HDA_GENERIC
 	help
-	  Say Y here to include Realtek HD-audio codec support in
+	  Say Y or M here to include Realtek HD-audio codec support in
 	  snd-hda-intel driver, such as ALC880.
 
-	  When the HD-audio driver is built as a module, the codec
+comment "Set to Y if you want auto-loading the codec driver"
-	  support code is also built as another module,
+	depends on SND_HDA_INTEL=y && SND_HDA_CODEC_REALTEK=m
-	  snd-hda-codec-realtek.
-	  This module is automatically loaded at probing.
 
 config SND_HDA_CODEC_ANALOG
-	bool "Build Analog Device HD-audio codec support"
+	tristate "Build Analog Device HD-audio codec support"
-	default y
 	select SND_HDA_GENERIC
 	help
-	  Say Y here to include Analog Device HD-audio codec support in
+	  Say Y or M here to include Analog Device HD-audio codec support in
 	  snd-hda-intel driver, such as AD1986A.
 
-	  When the HD-audio driver is built as a module, the codec
+comment "Set to Y if you want auto-loading the codec driver"
-	  support code is also built as another module,
+	depends on SND_HDA_INTEL=y && SND_HDA_CODEC_ANALOG=m
-	  snd-hda-codec-analog.
-	  This module is automatically loaded at probing.
 
 config SND_HDA_CODEC_SIGMATEL
-	bool "Build IDT/Sigmatel HD-audio codec support"
+	tristate "Build IDT/Sigmatel HD-audio codec support"
-	default y
 	select SND_HDA_GENERIC
 	help
-	  Say Y here to include IDT (Sigmatel) HD-audio codec support in
+	  Say Y or M here to include IDT (Sigmatel) HD-audio codec support in
 	  snd-hda-intel driver, such as STAC9200.
 
-	  When the HD-audio driver is built as a module, the codec
+comment "Set to Y if you want auto-loading the codec driver"
-	  support code is also built as another module,
+	depends on SND_HDA_INTEL=y && SND_HDA_CODEC_SIGMATEL=m
-	  snd-hda-codec-idt.
-	  This module is automatically loaded at probing.
 
 config SND_HDA_CODEC_VIA
-	bool "Build VIA HD-audio codec support"
+	tristate "Build VIA HD-audio codec support"
-	default y
 	select SND_HDA_GENERIC
 	help
-	  Say Y here to include VIA HD-audio codec support in
+	  Say Y or M here to include VIA HD-audio codec support in
 	  snd-hda-intel driver, such as VT1708.
 
-	  When the HD-audio driver is built as a module, the codec
+comment "Set to Y if you want auto-loading the codec driver"
-	  support code is also built as another module,
+	depends on SND_HDA_INTEL=y && SND_HDA_CODEC_VIA=m
-	  snd-hda-codec-via.
-	  This module is automatically loaded at probing.
 
 config SND_HDA_CODEC_HDMI
-	bool "Build HDMI/DisplayPort HD-audio codec support"
+	tristate "Build HDMI/DisplayPort HD-audio codec support"
-	default y
 	help
-	  Say Y here to include HDMI and DisplayPort HD-audio codec
+	  Say Y or M here to include HDMI and DisplayPort HD-audio codec
 	  support in snd-hda-intel driver.  This includes all AMD/ATI,
 	  Intel and Nvidia HDMI/DisplayPort codecs.
 
-	  When the HD-audio driver is built as a module, the codec
+comment "Set to Y if you want auto-loading the codec driver"
-	  support code is also built as another module,
+	depends on SND_HDA_INTEL=y && SND_HDA_CODEC_HDMI=m
-	  snd-hda-codec-hdmi.
-	  This module is automatically loaded at probing.
 
 config SND_HDA_I915
 	bool
@@ -157,55 +142,43 @@ config SND_HDA_I915
 	depends on DRM_I915
 
 config SND_HDA_CODEC_CIRRUS
-	bool "Build Cirrus Logic codec support"
+	tristate "Build Cirrus Logic codec support"
-	default y
 	select SND_HDA_GENERIC
 	help
-	  Say Y here to include Cirrus Logic codec support in
+	  Say Y or M here to include Cirrus Logic codec support in
 	  snd-hda-intel driver, such as CS4206.
 
-	  When the HD-audio driver is built as a module, the codec
+comment "Set to Y if you want auto-loading the codec driver"
-	  support code is also built as another module,
+	depends on SND_HDA_INTEL=y && SND_HDA_CODEC_CIRRUS=m
-	  snd-hda-codec-cirrus.
-	  This module is automatically loaded at probing.
 
 config SND_HDA_CODEC_CONEXANT
-	bool "Build Conexant HD-audio codec support"
+	tristate "Build Conexant HD-audio codec support"
-	default y
 	select SND_HDA_GENERIC
 	help
-	  Say Y here to include Conexant HD-audio codec support in
+	  Say Y or M here to include Conexant HD-audio codec support in
 	  snd-hda-intel driver, such as CX20549.
 
-	  When the HD-audio driver is built as a module, the codec
+comment "Set to Y if you want auto-loading the codec driver"
-	  support code is also built as another module,
+	depends on SND_HDA_INTEL=y && SND_HDA_CODEC_CONEXANT=m
-	  snd-hda-codec-conexant.
-	  This module is automatically loaded at probing.
 
 config SND_HDA_CODEC_CA0110
-	bool "Build Creative CA0110-IBG codec support"
+	tristate "Build Creative CA0110-IBG codec support"
-	default y
 	select SND_HDA_GENERIC
 	help
-	  Say Y here to include Creative CA0110-IBG codec support in
+	  Say Y or M here to include Creative CA0110-IBG codec support in
 	  snd-hda-intel driver, found on some Creative X-Fi cards.
 
-	  When the HD-audio driver is built as a module, the codec
+comment "Set to Y if you want auto-loading the codec driver"
-	  support code is also built as another module,
+	depends on SND_HDA_INTEL=y && SND_HDA_CODEC_CA0110=m
-	  snd-hda-codec-ca0110.
-	  This module is automatically loaded at probing.
 
 config SND_HDA_CODEC_CA0132
-	bool "Build Creative CA0132 codec support"
+	tristate "Build Creative CA0132 codec support"
-	default y
 	help
-	  Say Y here to include Creative CA0132 codec support in
+	  Say Y or M here to include Creative CA0132 codec support in
 	  snd-hda-intel driver.
 
-	  When the HD-audio driver is built as a module, the codec
+comment "Set to Y if you want auto-loading the codec driver"
-	  support code is also built as another module,
+	depends on SND_HDA_INTEL=y && SND_HDA_CODEC_CA0132=m
-	  snd-hda-codec-ca0132.
-	  This module is automatically loaded at probing.
 
 config SND_HDA_CODEC_CA0132_DSP
 	bool "Support new DSP code for CA0132 codec"
@@ -220,37 +193,33 @@ config SND_HDA_CODEC_CA0132_DSP
 	  (ctefx.bin).
 
 config SND_HDA_CODEC_CMEDIA
-	bool "Build C-Media HD-audio codec support"
+	tristate "Build C-Media HD-audio codec support"
-	default y
 	select SND_HDA_GENERIC
 	help
-	  Say Y here to include C-Media HD-audio codec support in
+	  Say Y or M here to include C-Media HD-audio codec support in
 	  snd-hda-intel driver, such as CMI9880.
 
-	  When the HD-audio driver is built as a module, the codec
+comment "Set to Y if you want auto-loading the codec driver"
-	  support code is also built as another module,
+	depends on SND_HDA_INTEL=y && SND_HDA_CODEC_CMEDIA=m
-	  snd-hda-codec-cmedia.
-	  This module is automatically loaded at probing.
 
 config SND_HDA_CODEC_SI3054
-	bool "Build Silicon Labs 3054 HD-modem codec support"
+	tristate "Build Silicon Labs 3054 HD-modem codec support"
-	default y
 	help
-	  Say Y here to include Silicon Labs 3054 HD-modem codec
+	  Say Y or M here to include Silicon Labs 3054 HD-modem codec
 	  (and compatibles) support in snd-hda-intel driver.
 
-	  When the HD-audio driver is built as a module, the codec
+comment "Set to Y if you want auto-loading the codec driver"
-	  support code is also built as another module,
+	depends on SND_HDA_INTEL=y && SND_HDA_CODEC_SI3054=m
-	  snd-hda-codec-si3054.
-	  This module is automatically loaded at probing.
 
 config SND_HDA_GENERIC
-	bool "Enable generic HD-audio codec parser"
+	tristate "Enable generic HD-audio codec parser"
-	default y
 	help
-	  Say Y here to enable the generic HD-audio codec parser
+	  Say Y or M here to enable the generic HD-audio codec parser
 	  in snd-hda-intel driver.
 
+comment "Set to Y if you want auto-loading the codec driver"
+	depends on SND_HDA_INTEL=y && SND_HDA_GENERIC=m
+
 config SND_HDA_POWER_SAVE_DEFAULT
 	int "Default time-out for HD-audio power-save mode"
 	depends on PM

sound/pci/hda/Makefile

@@ -3,7 +3,6 @@ snd-hda-intel-objs := hda_intel.o
 snd-hda-intel-$(CONFIG_SND_HDA_I915) +=	hda_i915.o
 
 snd-hda-codec-y := hda_codec.o hda_jack.o hda_auto_parser.o
-snd-hda-codec-$(CONFIG_SND_HDA_GENERIC) += hda_generic.o
 snd-hda-codec-$(CONFIG_PROC_FS) += hda_proc.o
 snd-hda-codec-$(CONFIG_SND_HDA_HWDEP) += hda_hwdep.o
 snd-hda-codec-$(CONFIG_SND_HDA_INPUT_BEEP) += hda_beep.o
@@ -12,6 +11,7 @@ snd-hda-codec-$(CONFIG_SND_HDA_INPUT_BEEP) += hda_beep.o
 CFLAGS_hda_codec.o := -I$(src)
 CFLAGS_hda_intel.o := -I$(src)
 
+snd-hda-codec-generic-objs :=	hda_generic.o
 snd-hda-codec-realtek-objs :=	patch_realtek.o
 snd-hda-codec-cmedia-objs :=	patch_cmedia.o
 snd-hda-codec-analog-objs :=	patch_analog.o
@@ -27,40 +27,19 @@ snd-hda-codec-hdmi-objs :=	patch_hdmi.o hda_eld.o
 # common driver
 obj-$(CONFIG_SND_HDA_INTEL) := snd-hda-codec.o
 
-# codec drivers (note: CONFIG_SND_HDA_CODEC_XXX are booleans)
+# codec drivers
-ifdef CONFIG_SND_HDA_CODEC_REALTEK
+obj-$(CONFIG_SND_HDA_GENERIC) += snd-hda-codec-generic.o
-obj-$(CONFIG_SND_HDA_INTEL) += snd-hda-codec-realtek.o
+obj-$(CONFIG_SND_HDA_CODEC_REALTEK) += snd-hda-codec-realtek.o
-endif
+obj-$(CONFIG_SND_HDA_CODEC_CMEDIA) += snd-hda-codec-cmedia.o
-ifdef CONFIG_SND_HDA_CODEC_CMEDIA
+obj-$(CONFIG_SND_HDA_CODEC_ANALOG) += snd-hda-codec-analog.o
-obj-$(CONFIG_SND_HDA_INTEL) += snd-hda-codec-cmedia.o
+obj-$(CONFIG_SND_HDA_CODEC_SIGMATEL) += snd-hda-codec-idt.o
-endif
+obj-$(CONFIG_SND_HDA_CODEC_SI3054) += snd-hda-codec-si3054.o
-ifdef CONFIG_SND_HDA_CODEC_ANALOG
+obj-$(CONFIG_SND_HDA_CODEC_CIRRUS) += snd-hda-codec-cirrus.o
-obj-$(CONFIG_SND_HDA_INTEL) += snd-hda-codec-analog.o
+obj-$(CONFIG_SND_HDA_CODEC_CA0110) += snd-hda-codec-ca0110.o
-endif
+obj-$(CONFIG_SND_HDA_CODEC_CA0132) += snd-hda-codec-ca0132.o
-ifdef CONFIG_SND_HDA_CODEC_SIGMATEL
+obj-$(CONFIG_SND_HDA_CODEC_CONEXANT) += snd-hda-codec-conexant.o
-obj-$(CONFIG_SND_HDA_INTEL) += snd-hda-codec-idt.o
+obj-$(CONFIG_SND_HDA_CODEC_VIA) += snd-hda-codec-via.o
-endif
+obj-$(CONFIG_SND_HDA_CODEC_HDMI) += snd-hda-codec-hdmi.o
-ifdef CONFIG_SND_HDA_CODEC_SI3054
-obj-$(CONFIG_SND_HDA_INTEL) += snd-hda-codec-si3054.o
-endif
-ifdef CONFIG_SND_HDA_CODEC_CIRRUS
-obj-$(CONFIG_SND_HDA_INTEL) += snd-hda-codec-cirrus.o
-endif
-ifdef CONFIG_SND_HDA_CODEC_CA0110
-obj-$(CONFIG_SND_HDA_INTEL) += snd-hda-codec-ca0110.o
-endif
-ifdef CONFIG_SND_HDA_CODEC_CA0132
-obj-$(CONFIG_SND_HDA_INTEL) += snd-hda-codec-ca0132.o
-endif
-ifdef CONFIG_SND_HDA_CODEC_CONEXANT
-obj-$(CONFIG_SND_HDA_INTEL) += snd-hda-codec-conexant.o
-endif
-ifdef CONFIG_SND_HDA_CODEC_VIA
-obj-$(CONFIG_SND_HDA_INTEL) += snd-hda-codec-via.o
-endif
-ifdef CONFIG_SND_HDA_CODEC_HDMI
-obj-$(CONFIG_SND_HDA_INTEL) += snd-hda-codec-hdmi.o
-endif
 
 # this must be the last entry after codec drivers;
 # otherwise the codec patches won't be hooked before the PCI probe

sound/pci/hda/hda_auto_parser.c

@@ -414,7 +414,7 @@ int snd_hda_parse_pin_defcfg(struct hda_codec *codec,
 
 	return 0;
 }
-EXPORT_SYMBOL_HDA(snd_hda_parse_pin_defcfg);
+EXPORT_SYMBOL_GPL(snd_hda_parse_pin_defcfg);
 
 int snd_hda_get_input_pin_attr(unsigned int def_conf)
 {
@@ -435,7 +435,7 @@ int snd_hda_get_input_pin_attr(unsigned int def_conf)
 		return INPUT_PIN_ATTR_FRONT;
 	return INPUT_PIN_ATTR_NORMAL;
 }
-EXPORT_SYMBOL_HDA(snd_hda_get_input_pin_attr);
+EXPORT_SYMBOL_GPL(snd_hda_get_input_pin_attr);
 
 /**
  * hda_get_input_pin_label - Give a label for the given input pin
@@ -547,7 +547,7 @@ const char *hda_get_autocfg_input_label(struct hda_codec *codec,
 				       cfg->inputs[input].pin,
 				       has_multiple_pins);
 }
-EXPORT_SYMBOL_HDA(hda_get_autocfg_input_label);
+EXPORT_SYMBOL_GPL(hda_get_autocfg_input_label);
 
 /* return the position of NID in the list, or -1 if not found */
 static int find_idx_in_nid_list(hda_nid_t nid, const hda_nid_t *list, int nums)
@@ -721,7 +721,7 @@ int snd_hda_get_pin_label(struct hda_codec *codec, hda_nid_t nid,
 	strlcpy(label, name, maxlen);
 	return 1;
 }
-EXPORT_SYMBOL_HDA(snd_hda_get_pin_label);
+EXPORT_SYMBOL_GPL(snd_hda_get_pin_label);
 
 int snd_hda_add_verbs(struct hda_codec *codec,
 		      const struct hda_verb *list)
@@ -733,7 +733,7 @@ int snd_hda_add_verbs(struct hda_codec *codec,
 	*v = list;
 	return 0;
 }
-EXPORT_SYMBOL_HDA(snd_hda_add_verbs);
+EXPORT_SYMBOL_GPL(snd_hda_add_verbs);
 
 void snd_hda_apply_verbs(struct hda_codec *codec)
 {
@@ -743,7 +743,7 @@ void snd_hda_apply_verbs(struct hda_codec *codec)
 		snd_hda_sequence_write(codec, *v);
 	}
 }
-EXPORT_SYMBOL_HDA(snd_hda_apply_verbs);
+EXPORT_SYMBOL_GPL(snd_hda_apply_verbs);
 
 void snd_hda_apply_pincfgs(struct hda_codec *codec,
 			   const struct hda_pintbl *cfg)
@@ -751,7 +751,7 @@ void snd_hda_apply_pincfgs(struct hda_codec *codec,
 	for (; cfg->nid; cfg++)
 		snd_hda_codec_set_pincfg(codec, cfg->nid, cfg->val);
 }
-EXPORT_SYMBOL_HDA(snd_hda_apply_pincfgs);
+EXPORT_SYMBOL_GPL(snd_hda_apply_pincfgs);
 
 static void set_pin_targets(struct hda_codec *codec,
 			    const struct hda_pintbl *cfg)
@@ -822,7 +822,7 @@ void snd_hda_apply_fixup(struct hda_codec *codec, int action)
 	if (codec->fixup_list)
 		apply_fixup(codec, codec->fixup_id, action, 0);
 }
-EXPORT_SYMBOL_HDA(snd_hda_apply_fixup);
+EXPORT_SYMBOL_GPL(snd_hda_apply_fixup);
 
 void snd_hda_pick_fixup(struct hda_codec *codec,
 			const struct hda_model_fixup *models,
@@ -880,4 +880,4 @@ void snd_hda_pick_fixup(struct hda_codec *codec,
 		codec->fixup_name = name;
 	}
 }
-EXPORT_SYMBOL_HDA(snd_hda_pick_fixup);
+EXPORT_SYMBOL_GPL(snd_hda_pick_fixup);

sound/pci/hda/hda_beep.c

@@ -194,7 +194,7 @@ int snd_hda_enable_beep_device(struct hda_codec *codec, int enable)
 	}
 	return 0;
 }
-EXPORT_SYMBOL_HDA(snd_hda_enable_beep_device);
+EXPORT_SYMBOL_GPL(snd_hda_enable_beep_device);
 
 int snd_hda_attach_beep_device(struct hda_codec *codec, int nid)
 {
@@ -231,7 +231,7 @@ int snd_hda_attach_beep_device(struct hda_codec *codec, int nid)
 
 	return 0;
 }
-EXPORT_SYMBOL_HDA(snd_hda_attach_beep_device);
+EXPORT_SYMBOL_GPL(snd_hda_attach_beep_device);
 
 void snd_hda_detach_beep_device(struct hda_codec *codec)
 {
@@ -243,7 +243,7 @@ void snd_hda_detach_beep_device(struct hda_codec *codec)
 		kfree(beep);
 	}
 }
-EXPORT_SYMBOL_HDA(snd_hda_detach_beep_device);
+EXPORT_SYMBOL_GPL(snd_hda_detach_beep_device);
 
 static bool ctl_has_mute(struct snd_kcontrol *kcontrol)
 {
@@ -265,7 +265,7 @@ int snd_hda_mixer_amp_switch_get_beep(struct snd_kcontrol *kcontrol,
 	}
 	return snd_hda_mixer_amp_switch_get(kcontrol, ucontrol);
 }
-EXPORT_SYMBOL_HDA(snd_hda_mixer_amp_switch_get_beep);
+EXPORT_SYMBOL_GPL(snd_hda_mixer_amp_switch_get_beep);
 
 int snd_hda_mixer_amp_switch_put_beep(struct snd_kcontrol *kcontrol,
 				      struct snd_ctl_elem_value *ucontrol)
@@ -288,4 +288,4 @@ int snd_hda_mixer_amp_switch_put_beep(struct snd_kcontrol *kcontrol,
 		return 0;
 	return snd_hda_mixer_amp_switch_put(kcontrol, ucontrol);
 }
-EXPORT_SYMBOL_HDA(snd_hda_mixer_amp_switch_put_beep);
+EXPORT_SYMBOL_GPL(snd_hda_mixer_amp_switch_put_beep);

sound/pci/hda/hda_codec.h

@@ -25,552 +25,7 @@
 #include <sound/control.h>
 #include <sound/pcm.h>
 #include <sound/hwdep.h>
-
+#include <sound/hda_verbs.h>
-/*
- * nodes
- */
-#define	AC_NODE_ROOT		0x00
-
-/*
- * function group types
- */
-enum {
-	AC_GRP_AUDIO_FUNCTION = 0x01,
-	AC_GRP_MODEM_FUNCTION = 0x02,
-};
-	
-/*
- * widget types
- */
-enum {
-	AC_WID_AUD_OUT,		/* Audio Out */
-	AC_WID_AUD_IN,		/* Audio In */
-	AC_WID_AUD_MIX,		/* Audio Mixer */
-	AC_WID_AUD_SEL,		/* Audio Selector */
-	AC_WID_PIN,		/* Pin Complex */
-	AC_WID_POWER,		/* Power */
-	AC_WID_VOL_KNB,		/* Volume Knob */
-	AC_WID_BEEP,		/* Beep Generator */
-	AC_WID_VENDOR = 0x0f	/* Vendor specific */
-};
-
-/*
- * GET verbs
- */
-#define AC_VERB_GET_STREAM_FORMAT		0x0a00
-#define AC_VERB_GET_AMP_GAIN_MUTE		0x0b00
-#define AC_VERB_GET_PROC_COEF			0x0c00
-#define AC_VERB_GET_COEF_INDEX			0x0d00
-#define AC_VERB_PARAMETERS			0x0f00
-#define AC_VERB_GET_CONNECT_SEL			0x0f01
-#define AC_VERB_GET_CONNECT_LIST		0x0f02
-#define AC_VERB_GET_PROC_STATE			0x0f03
-#define AC_VERB_GET_SDI_SELECT			0x0f04
-#define AC_VERB_GET_POWER_STATE			0x0f05
-#define AC_VERB_GET_CONV			0x0f06
-#define AC_VERB_GET_PIN_WIDGET_CONTROL		0x0f07
-#define AC_VERB_GET_UNSOLICITED_RESPONSE	0x0f08
-#define AC_VERB_GET_PIN_SENSE			0x0f09
-#define AC_VERB_GET_BEEP_CONTROL		0x0f0a
-#define AC_VERB_GET_EAPD_BTLENABLE		0x0f0c
-#define AC_VERB_GET_DIGI_CONVERT_1		0x0f0d
-#define AC_VERB_GET_DIGI_CONVERT_2		0x0f0e /* unused */
-#define AC_VERB_GET_VOLUME_KNOB_CONTROL		0x0f0f
-/* f10-f1a: GPIO */
-#define AC_VERB_GET_GPIO_DATA			0x0f15
-#define AC_VERB_GET_GPIO_MASK			0x0f16
-#define AC_VERB_GET_GPIO_DIRECTION		0x0f17
-#define AC_VERB_GET_GPIO_WAKE_MASK		0x0f18
-#define AC_VERB_GET_GPIO_UNSOLICITED_RSP_MASK	0x0f19
-#define AC_VERB_GET_GPIO_STICKY_MASK		0x0f1a
-#define AC_VERB_GET_CONFIG_DEFAULT		0x0f1c
-/* f20: AFG/MFG */
-#define AC_VERB_GET_SUBSYSTEM_ID		0x0f20
-#define AC_VERB_GET_CVT_CHAN_COUNT		0x0f2d
-#define AC_VERB_GET_HDMI_DIP_SIZE		0x0f2e
-#define AC_VERB_GET_HDMI_ELDD			0x0f2f
-#define AC_VERB_GET_HDMI_DIP_INDEX		0x0f30
-#define AC_VERB_GET_HDMI_DIP_DATA		0x0f31
-#define AC_VERB_GET_HDMI_DIP_XMIT		0x0f32
-#define AC_VERB_GET_HDMI_CP_CTRL		0x0f33
-#define AC_VERB_GET_HDMI_CHAN_SLOT		0x0f34
-#define AC_VERB_GET_DEVICE_SEL			0xf35
-#define AC_VERB_GET_DEVICE_LIST			0xf36
-
-/*
- * SET verbs
- */
-#define AC_VERB_SET_STREAM_FORMAT		0x200
-#define AC_VERB_SET_AMP_GAIN_MUTE		0x300
-#define AC_VERB_SET_PROC_COEF			0x400
-#define AC_VERB_SET_COEF_INDEX			0x500
-#define AC_VERB_SET_CONNECT_SEL			0x701
-#define AC_VERB_SET_PROC_STATE			0x703
-#define AC_VERB_SET_SDI_SELECT			0x704
-#define AC_VERB_SET_POWER_STATE			0x705
-#define AC_VERB_SET_CHANNEL_STREAMID		0x706
-#define AC_VERB_SET_PIN_WIDGET_CONTROL		0x707
-#define AC_VERB_SET_UNSOLICITED_ENABLE		0x708
-#define AC_VERB_SET_PIN_SENSE			0x709
-#define AC_VERB_SET_BEEP_CONTROL		0x70a
-#define AC_VERB_SET_EAPD_BTLENABLE		0x70c
-#define AC_VERB_SET_DIGI_CONVERT_1		0x70d
-#define AC_VERB_SET_DIGI_CONVERT_2		0x70e
-#define AC_VERB_SET_VOLUME_KNOB_CONTROL		0x70f
-#define AC_VERB_SET_GPIO_DATA			0x715
-#define AC_VERB_SET_GPIO_MASK			0x716
-#define AC_VERB_SET_GPIO_DIRECTION		0x717
-#define AC_VERB_SET_GPIO_WAKE_MASK		0x718
-#define AC_VERB_SET_GPIO_UNSOLICITED_RSP_MASK	0x719
-#define AC_VERB_SET_GPIO_STICKY_MASK		0x71a
-#define AC_VERB_SET_CONFIG_DEFAULT_BYTES_0	0x71c
-#define AC_VERB_SET_CONFIG_DEFAULT_BYTES_1	0x71d
-#define AC_VERB_SET_CONFIG_DEFAULT_BYTES_2	0x71e
-#define AC_VERB_SET_CONFIG_DEFAULT_BYTES_3	0x71f
-#define AC_VERB_SET_EAPD				0x788
-#define AC_VERB_SET_CODEC_RESET			0x7ff
-#define AC_VERB_SET_CVT_CHAN_COUNT		0x72d
-#define AC_VERB_SET_HDMI_DIP_INDEX		0x730
-#define AC_VERB_SET_HDMI_DIP_DATA		0x731
-#define AC_VERB_SET_HDMI_DIP_XMIT		0x732
-#define AC_VERB_SET_HDMI_CP_CTRL		0x733
-#define AC_VERB_SET_HDMI_CHAN_SLOT		0x734
-#define AC_VERB_SET_DEVICE_SEL			0x735
-
-/*
- * Parameter IDs
- */
-#define AC_PAR_VENDOR_ID		0x00
-#define AC_PAR_SUBSYSTEM_ID		0x01
-#define AC_PAR_REV_ID			0x02
-#define AC_PAR_NODE_COUNT		0x04
-#define AC_PAR_FUNCTION_TYPE		0x05
-#define AC_PAR_AUDIO_FG_CAP		0x08
-#define AC_PAR_AUDIO_WIDGET_CAP		0x09
-#define AC_PAR_PCM			0x0a
-#define AC_PAR_STREAM			0x0b
-#define AC_PAR_PIN_CAP			0x0c
-#define AC_PAR_AMP_IN_CAP		0x0d
-#define AC_PAR_CONNLIST_LEN		0x0e
-#define AC_PAR_POWER_STATE		0x0f
-#define AC_PAR_PROC_CAP			0x10
-#define AC_PAR_GPIO_CAP			0x11
-#define AC_PAR_AMP_OUT_CAP		0x12
-#define AC_PAR_VOL_KNB_CAP		0x13
-#define AC_PAR_DEVLIST_LEN		0x15
-#define AC_PAR_HDMI_LPCM_CAP		0x20
-
-/*
- * AC_VERB_PARAMETERS results (32bit)
- */
-
-/* Function Group Type */
-#define AC_FGT_TYPE			(0xff<<0)
-#define AC_FGT_TYPE_SHIFT		0
-#define AC_FGT_UNSOL_CAP		(1<<8)
-
-/* Audio Function Group Capabilities */
-#define AC_AFG_OUT_DELAY		(0xf<<0)
-#define AC_AFG_IN_DELAY			(0xf<<8)
-#define AC_AFG_BEEP_GEN			(1<<16)
-
-/* Audio Widget Capabilities */
-#define AC_WCAP_STEREO			(1<<0)	/* stereo I/O */
-#define AC_WCAP_IN_AMP			(1<<1)	/* AMP-in present */
-#define AC_WCAP_OUT_AMP			(1<<2)	/* AMP-out present */
-#define AC_WCAP_AMP_OVRD		(1<<3)	/* AMP-parameter override */
-#define AC_WCAP_FORMAT_OVRD		(1<<4)	/* format override */
-#define AC_WCAP_STRIPE			(1<<5)	/* stripe */
-#define AC_WCAP_PROC_WID		(1<<6)	/* Proc Widget */
-#define AC_WCAP_UNSOL_CAP		(1<<7)	/* Unsol capable */
-#define AC_WCAP_CONN_LIST		(1<<8)	/* connection list */
-#define AC_WCAP_DIGITAL			(1<<9)	/* digital I/O */
-#define AC_WCAP_POWER			(1<<10)	/* power control */
-#define AC_WCAP_LR_SWAP			(1<<11)	/* L/R swap */
-#define AC_WCAP_CP_CAPS			(1<<12) /* content protection */
-#define AC_WCAP_CHAN_CNT_EXT		(7<<13)	/* channel count ext */
-#define AC_WCAP_DELAY			(0xf<<16)
-#define AC_WCAP_DELAY_SHIFT		16
-#define AC_WCAP_TYPE			(0xf<<20)
-#define AC_WCAP_TYPE_SHIFT		20
-
-/* supported PCM rates and bits */
-#define AC_SUPPCM_RATES			(0xfff << 0)
-#define AC_SUPPCM_BITS_8		(1<<16)
-#define AC_SUPPCM_BITS_16		(1<<17)
-#define AC_SUPPCM_BITS_20		(1<<18)
-#define AC_SUPPCM_BITS_24		(1<<19)
-#define AC_SUPPCM_BITS_32		(1<<20)
-
-/* supported PCM stream format */
-#define AC_SUPFMT_PCM			(1<<0)
-#define AC_SUPFMT_FLOAT32		(1<<1)
-#define AC_SUPFMT_AC3			(1<<2)
-
-/* GP I/O count */
-#define AC_GPIO_IO_COUNT		(0xff<<0)
-#define AC_GPIO_O_COUNT			(0xff<<8)
-#define AC_GPIO_O_COUNT_SHIFT		8
-#define AC_GPIO_I_COUNT			(0xff<<16)
-#define AC_GPIO_I_COUNT_SHIFT		16
-#define AC_GPIO_UNSOLICITED		(1<<30)
-#define AC_GPIO_WAKE			(1<<31)
-
-/* Converter stream, channel */
-#define AC_CONV_CHANNEL			(0xf<<0)
-#define AC_CONV_STREAM			(0xf<<4)
-#define AC_CONV_STREAM_SHIFT		4
-
-/* Input converter SDI select */
-#define AC_SDI_SELECT			(0xf<<0)
-
-/* stream format id */
-#define AC_FMT_CHAN_SHIFT		0
-#define AC_FMT_CHAN_MASK		(0x0f << 0)
-#define AC_FMT_BITS_SHIFT		4
-#define AC_FMT_BITS_MASK		(7 << 4)
-#define AC_FMT_BITS_8			(0 << 4)
-#define AC_FMT_BITS_16			(1 << 4)
-#define AC_FMT_BITS_20			(2 << 4)
-#define AC_FMT_BITS_24			(3 << 4)
-#define AC_FMT_BITS_32			(4 << 4)
-#define AC_FMT_DIV_SHIFT		8
-#define AC_FMT_DIV_MASK			(7 << 8)
-#define AC_FMT_MULT_SHIFT		11
-#define AC_FMT_MULT_MASK		(7 << 11)
-#define AC_FMT_BASE_SHIFT		14
-#define AC_FMT_BASE_48K			(0 << 14)
-#define AC_FMT_BASE_44K			(1 << 14)
-#define AC_FMT_TYPE_SHIFT		15
-#define AC_FMT_TYPE_PCM			(0 << 15)
-#define AC_FMT_TYPE_NON_PCM		(1 << 15)
-
-/* Unsolicited response control */
-#define AC_UNSOL_TAG			(0x3f<<0)
-#define AC_UNSOL_ENABLED		(1<<7)
-#define AC_USRSP_EN			AC_UNSOL_ENABLED
-
-/* Unsolicited responses */
-#define AC_UNSOL_RES_TAG		(0x3f<<26)
-#define AC_UNSOL_RES_TAG_SHIFT		26
-#define AC_UNSOL_RES_SUBTAG		(0x1f<<21)
-#define AC_UNSOL_RES_SUBTAG_SHIFT	21
-#define AC_UNSOL_RES_DE			(0x3f<<15)  /* Device Entry
-						     * (for DP1.2 MST)
-						     */
-#define AC_UNSOL_RES_DE_SHIFT		15
-#define AC_UNSOL_RES_IA			(1<<2)	/* Inactive (for DP1.2 MST) */
-#define AC_UNSOL_RES_ELDV		(1<<1)	/* ELD Data valid (for HDMI) */
-#define AC_UNSOL_RES_PD			(1<<0)	/* pinsense detect */
-#define AC_UNSOL_RES_CP_STATE		(1<<1)	/* content protection */
-#define AC_UNSOL_RES_CP_READY		(1<<0)	/* content protection */
-
-/* Pin widget capabilies */
-#define AC_PINCAP_IMP_SENSE		(1<<0)	/* impedance sense capable */
-#define AC_PINCAP_TRIG_REQ		(1<<1)	/* trigger required */
-#define AC_PINCAP_PRES_DETECT		(1<<2)	/* presence detect capable */
-#define AC_PINCAP_HP_DRV		(1<<3)	/* headphone drive capable */
-#define AC_PINCAP_OUT			(1<<4)	/* output capable */
-#define AC_PINCAP_IN			(1<<5)	/* input capable */
-#define AC_PINCAP_BALANCE		(1<<6)	/* balanced I/O capable */
-/* Note: This LR_SWAP pincap is defined in the Realtek ALC883 specification,
- *       but is marked reserved in the Intel HDA specification.
- */
-#define AC_PINCAP_LR_SWAP		(1<<7)	/* L/R swap */
-/* Note: The same bit as LR_SWAP is newly defined as HDMI capability
- *       in HD-audio specification
- */
-#define AC_PINCAP_HDMI			(1<<7)	/* HDMI pin */
-#define AC_PINCAP_DP			(1<<24)	/* DisplayPort pin, can
-						 * coexist with AC_PINCAP_HDMI
-						 */
-#define AC_PINCAP_VREF			(0x37<<8)
-#define AC_PINCAP_VREF_SHIFT		8
-#define AC_PINCAP_EAPD			(1<<16)	/* EAPD capable */
-#define AC_PINCAP_HBR			(1<<27)	/* High Bit Rate */
-/* Vref status (used in pin cap) */
-#define AC_PINCAP_VREF_HIZ		(1<<0)	/* Hi-Z */
-#define AC_PINCAP_VREF_50		(1<<1)	/* 50% */
-#define AC_PINCAP_VREF_GRD		(1<<2)	/* ground */
-#define AC_PINCAP_VREF_80		(1<<4)	/* 80% */
-#define AC_PINCAP_VREF_100		(1<<5)	/* 100% */
-
-/* Amplifier capabilities */
-#define AC_AMPCAP_OFFSET		(0x7f<<0)  /* 0dB offset */
-#define AC_AMPCAP_OFFSET_SHIFT		0
-#define AC_AMPCAP_NUM_STEPS		(0x7f<<8)  /* number of steps */
-#define AC_AMPCAP_NUM_STEPS_SHIFT	8
-#define AC_AMPCAP_STEP_SIZE		(0x7f<<16) /* step size 0-32dB
-						    * in 0.25dB
-						    */
-#define AC_AMPCAP_STEP_SIZE_SHIFT	16
-#define AC_AMPCAP_MUTE			(1<<31)    /* mute capable */
-#define AC_AMPCAP_MUTE_SHIFT		31
-
-/* driver-specific amp-caps: using bits 24-30 */
-#define AC_AMPCAP_MIN_MUTE		(1 << 30) /* min-volume = mute */
-
-/* Connection list */
-#define AC_CLIST_LENGTH			(0x7f<<0)
-#define AC_CLIST_LONG			(1<<7)
-
-/* Supported power status */
-#define AC_PWRST_D0SUP			(1<<0)
-#define AC_PWRST_D1SUP			(1<<1)
-#define AC_PWRST_D2SUP			(1<<2)
-#define AC_PWRST_D3SUP			(1<<3)
-#define AC_PWRST_D3COLDSUP		(1<<4)
-#define AC_PWRST_S3D3COLDSUP		(1<<29)
-#define AC_PWRST_CLKSTOP		(1<<30)
-#define AC_PWRST_EPSS			(1U<<31)
-
-/* Power state values */
-#define AC_PWRST_SETTING		(0xf<<0)
-#define AC_PWRST_ACTUAL			(0xf<<4)
-#define AC_PWRST_ACTUAL_SHIFT		4
-#define AC_PWRST_D0			0x00
-#define AC_PWRST_D1			0x01
-#define AC_PWRST_D2			0x02
-#define AC_PWRST_D3			0x03
-#define AC_PWRST_ERROR                  (1<<8)
-#define AC_PWRST_CLK_STOP_OK            (1<<9)
-#define AC_PWRST_SETTING_RESET          (1<<10)
-
-/* Processing capabilies */
-#define AC_PCAP_BENIGN			(1<<0)
-#define AC_PCAP_NUM_COEF		(0xff<<8)
-#define AC_PCAP_NUM_COEF_SHIFT		8
-
-/* Volume knobs capabilities */
-#define AC_KNBCAP_NUM_STEPS		(0x7f<<0)
-#define AC_KNBCAP_DELTA			(1<<7)
-
-/* HDMI LPCM capabilities */
-#define AC_LPCMCAP_48K_CP_CHNS		(0x0f<<0) /* max channels w/ CP-on */	
-#define AC_LPCMCAP_48K_NO_CHNS		(0x0f<<4) /* max channels w/o CP-on */
-#define AC_LPCMCAP_48K_20BIT		(1<<8)	/* 20b bitrate supported */
-#define AC_LPCMCAP_48K_24BIT		(1<<9)	/* 24b bitrate supported */
-#define AC_LPCMCAP_96K_CP_CHNS		(0x0f<<10) /* max channels w/ CP-on */	
-#define AC_LPCMCAP_96K_NO_CHNS		(0x0f<<14) /* max channels w/o CP-on */
-#define AC_LPCMCAP_96K_20BIT		(1<<18)	/* 20b bitrate supported */
-#define AC_LPCMCAP_96K_24BIT		(1<<19)	/* 24b bitrate supported */
-#define AC_LPCMCAP_192K_CP_CHNS		(0x0f<<20) /* max channels w/ CP-on */	
-#define AC_LPCMCAP_192K_NO_CHNS		(0x0f<<24) /* max channels w/o CP-on */
-#define AC_LPCMCAP_192K_20BIT		(1<<28)	/* 20b bitrate supported */
-#define AC_LPCMCAP_192K_24BIT		(1<<29)	/* 24b bitrate supported */
-#define AC_LPCMCAP_44K			(1<<30)	/* 44.1kHz support */
-#define AC_LPCMCAP_44K_MS		(1<<31)	/* 44.1kHz-multiplies support */
-
-/* Display pin's device list length */
-#define AC_DEV_LIST_LEN_MASK		0x3f
-#define AC_MAX_DEV_LIST_LEN		64
-
-/*
- * Control Parameters
- */
-
-/* Amp gain/mute */
-#define AC_AMP_MUTE			(1<<7)
-#define AC_AMP_GAIN			(0x7f)
-#define AC_AMP_GET_INDEX		(0xf<<0)
-
-#define AC_AMP_GET_LEFT			(1<<13)
-#define AC_AMP_GET_RIGHT		(0<<13)
-#define AC_AMP_GET_OUTPUT		(1<<15)
-#define AC_AMP_GET_INPUT		(0<<15)
-
-#define AC_AMP_SET_INDEX		(0xf<<8)
-#define AC_AMP_SET_INDEX_SHIFT		8
-#define AC_AMP_SET_RIGHT		(1<<12)
-#define AC_AMP_SET_LEFT			(1<<13)
-#define AC_AMP_SET_INPUT		(1<<14)
-#define AC_AMP_SET_OUTPUT		(1<<15)
-
-/* DIGITAL1 bits */
-#define AC_DIG1_ENABLE			(1<<0)
-#define AC_DIG1_V			(1<<1)
-#define AC_DIG1_VCFG			(1<<2)
-#define AC_DIG1_EMPHASIS		(1<<3)
-#define AC_DIG1_COPYRIGHT		(1<<4)
-#define AC_DIG1_NONAUDIO		(1<<5)
-#define AC_DIG1_PROFESSIONAL		(1<<6)
-#define AC_DIG1_LEVEL			(1<<7)
-
-/* DIGITAL2 bits */
-#define AC_DIG2_CC			(0x7f<<0)
-
-/* DIGITAL3 bits */
-#define AC_DIG3_ICT			(0xf<<0)
-#define AC_DIG3_KAE			(1<<7)
-
-/* Pin widget control - 8bit */
-#define AC_PINCTL_EPT			(0x3<<0)
-#define AC_PINCTL_EPT_NATIVE		0
-#define AC_PINCTL_EPT_HBR		3
-#define AC_PINCTL_VREFEN		(0x7<<0)
-#define AC_PINCTL_VREF_HIZ		0	/* Hi-Z */
-#define AC_PINCTL_VREF_50		1	/* 50% */
-#define AC_PINCTL_VREF_GRD		2	/* ground */
-#define AC_PINCTL_VREF_80		4	/* 80% */
-#define AC_PINCTL_VREF_100		5	/* 100% */
-#define AC_PINCTL_IN_EN			(1<<5)
-#define AC_PINCTL_OUT_EN		(1<<6)
-#define AC_PINCTL_HP_EN			(1<<7)
-
-/* Pin sense - 32bit */
-#define AC_PINSENSE_IMPEDANCE_MASK	(0x7fffffff)
-#define AC_PINSENSE_PRESENCE		(1<<31)
-#define AC_PINSENSE_ELDV		(1<<30)	/* ELD valid (HDMI) */
-
-/* EAPD/BTL enable - 32bit */
-#define AC_EAPDBTL_BALANCED		(1<<0)
-#define AC_EAPDBTL_EAPD			(1<<1)
-#define AC_EAPDBTL_LR_SWAP		(1<<2)
-
-/* HDMI ELD data */
-#define AC_ELDD_ELD_VALID		(1<<31)
-#define AC_ELDD_ELD_DATA		0xff
-
-/* HDMI DIP size */
-#define AC_DIPSIZE_ELD_BUF		(1<<3) /* ELD buf size of packet size */
-#define AC_DIPSIZE_PACK_IDX		(0x07<<0) /* packet index */
-
-/* HDMI DIP index */
-#define AC_DIPIDX_PACK_IDX		(0x07<<5) /* packet idnex */
-#define AC_DIPIDX_BYTE_IDX		(0x1f<<0) /* byte index */
-
-/* HDMI DIP xmit (transmit) control */
-#define AC_DIPXMIT_MASK			(0x3<<6)
-#define AC_DIPXMIT_DISABLE		(0x0<<6) /* disable xmit */
-#define AC_DIPXMIT_ONCE			(0x2<<6) /* xmit once then disable */
-#define AC_DIPXMIT_BEST			(0x3<<6) /* best effort */
-
-/* HDMI content protection (CP) control */
-#define AC_CPCTRL_CES			(1<<9) /* current encryption state */
-#define AC_CPCTRL_READY			(1<<8) /* ready bit */
-#define AC_CPCTRL_SUBTAG		(0x1f<<3) /* subtag for unsol-resp */
-#define AC_CPCTRL_STATE			(3<<0) /* current CP request state */
-
-/* Converter channel <-> HDMI slot mapping */
-#define AC_CVTMAP_HDMI_SLOT		(0xf<<0) /* HDMI slot number */
-#define AC_CVTMAP_CHAN			(0xf<<4) /* converter channel number */
-
-/* configuration default - 32bit */
-#define AC_DEFCFG_SEQUENCE		(0xf<<0)
-#define AC_DEFCFG_DEF_ASSOC		(0xf<<4)
-#define AC_DEFCFG_ASSOC_SHIFT		4
-#define AC_DEFCFG_MISC			(0xf<<8)
-#define AC_DEFCFG_MISC_SHIFT		8
-#define AC_DEFCFG_MISC_NO_PRESENCE	(1<<0)
-#define AC_DEFCFG_COLOR			(0xf<<12)
-#define AC_DEFCFG_COLOR_SHIFT		12
-#define AC_DEFCFG_CONN_TYPE		(0xf<<16)
-#define AC_DEFCFG_CONN_TYPE_SHIFT	16
-#define AC_DEFCFG_DEVICE		(0xf<<20)
-#define AC_DEFCFG_DEVICE_SHIFT		20
-#define AC_DEFCFG_LOCATION		(0x3f<<24)
-#define AC_DEFCFG_LOCATION_SHIFT	24
-#define AC_DEFCFG_PORT_CONN		(0x3<<30)
-#define AC_DEFCFG_PORT_CONN_SHIFT	30
-
-/* Display pin's device list entry */
-#define AC_DE_PD			(1<<0)
-#define AC_DE_ELDV			(1<<1)
-#define AC_DE_IA			(1<<2)
-
-/* device device types (0x0-0xf) */
-enum {
-	AC_JACK_LINE_OUT,
-	AC_JACK_SPEAKER,
-	AC_JACK_HP_OUT,
-	AC_JACK_CD,
-	AC_JACK_SPDIF_OUT,
-	AC_JACK_DIG_OTHER_OUT,
-	AC_JACK_MODEM_LINE_SIDE,
-	AC_JACK_MODEM_HAND_SIDE,
-	AC_JACK_LINE_IN,
-	AC_JACK_AUX,
-	AC_JACK_MIC_IN,
-	AC_JACK_TELEPHONY,
-	AC_JACK_SPDIF_IN,
-	AC_JACK_DIG_OTHER_IN,
-	AC_JACK_OTHER = 0xf,
-};
-
-/* jack connection types (0x0-0xf) */
-enum {
-	AC_JACK_CONN_UNKNOWN,
-	AC_JACK_CONN_1_8,
-	AC_JACK_CONN_1_4,
-	AC_JACK_CONN_ATAPI,
-	AC_JACK_CONN_RCA,
-	AC_JACK_CONN_OPTICAL,
-	AC_JACK_CONN_OTHER_DIGITAL,
-	AC_JACK_CONN_OTHER_ANALOG,
-	AC_JACK_CONN_DIN,
-	AC_JACK_CONN_XLR,
-	AC_JACK_CONN_RJ11,
-	AC_JACK_CONN_COMB,
-	AC_JACK_CONN_OTHER = 0xf,
-};
-
-/* jack colors (0x0-0xf) */
-enum {
-	AC_JACK_COLOR_UNKNOWN,
-	AC_JACK_COLOR_BLACK,
-	AC_JACK_COLOR_GREY,
-	AC_JACK_COLOR_BLUE,
-	AC_JACK_COLOR_GREEN,
-	AC_JACK_COLOR_RED,
-	AC_JACK_COLOR_ORANGE,
-	AC_JACK_COLOR_YELLOW,
-	AC_JACK_COLOR_PURPLE,
-	AC_JACK_COLOR_PINK,
-	AC_JACK_COLOR_WHITE = 0xe,
-	AC_JACK_COLOR_OTHER,
-};
-
-/* Jack location (0x0-0x3f) */
-/* common case */
-enum {
-	AC_JACK_LOC_NONE,
-	AC_JACK_LOC_REAR,
-	AC_JACK_LOC_FRONT,
-	AC_JACK_LOC_LEFT,
-	AC_JACK_LOC_RIGHT,
-	AC_JACK_LOC_TOP,
-	AC_JACK_LOC_BOTTOM,
-};
-/* bits 4-5 */
-enum {
-	AC_JACK_LOC_EXTERNAL = 0x00,
-	AC_JACK_LOC_INTERNAL = 0x10,
-	AC_JACK_LOC_SEPARATE = 0x20,
-	AC_JACK_LOC_OTHER    = 0x30,
-};
-enum {
-	/* external on primary chasis */
-	AC_JACK_LOC_REAR_PANEL = 0x07,
-	AC_JACK_LOC_DRIVE_BAY,
-	/* internal */
-	AC_JACK_LOC_RISER = 0x17,
-	AC_JACK_LOC_HDMI,
-	AC_JACK_LOC_ATAPI,
-	/* others */
-	AC_JACK_LOC_MOBILE_IN = 0x37,
-	AC_JACK_LOC_MOBILE_OUT,
-};
-
-/* Port connectivity (0-3) */
-enum {
-	AC_JACK_PORT_COMPLEX,
-	AC_JACK_PORT_NONE,
-	AC_JACK_PORT_FIXED,
-	AC_JACK_PORT_BOTH,
-};
-
-/* max. codec address */
-#define HDA_MAX_CODEC_ADDRESS	0x0f
 
 /*
  * generic arrays
@@ -673,6 +128,7 @@ struct hda_bus {
 
 	/* codec linked list */
 	struct list_head codec_list;
+	unsigned int num_codecs;
 	/* link caddr -> codec */
 	struct hda_codec *caddr_tbl[HDA_MAX_CODEC_ADDRESS + 1];
 
@@ -834,6 +290,7 @@ struct hda_codec {
 	/* detected preset */
 	const struct hda_codec_preset *preset;
 	struct module *owner;
+	int (*parser)(struct hda_codec *codec);
 	const char *vendor_name;	/* codec vendor name */
 	const char *chip_name;		/* codec chip name */
 	const char *modelname;	/* model name for preset */
@@ -907,7 +364,7 @@ struct hda_codec {
 #ifdef CONFIG_PM
 	unsigned int power_on :1;	/* current (global) power-state */
 	unsigned int d3_stop_clk:1;	/* support D3 operation without BCLK */
-	unsigned int pm_down_notified:1; /* PM notified to controller */
+	unsigned int pm_up_notified:1;	/* PM notified to controller */
 	unsigned int in_pm:1;		/* suspend/resume being performed */
 	int power_transition;	/* power-state in transition */
 	int power_count;	/* current (global) power refcount */
@@ -936,6 +393,8 @@ struct hda_codec {
 	struct snd_array jacks;
 #endif
 
+	int depop_delay; /* depop delay in ms, -1 for default delay time */
+
 	/* fix-up list */
 	int fixup_id;
 	const struct hda_fixup *fixup_list;
@@ -1222,19 +681,6 @@ snd_hda_codec_load_dsp_cleanup(struct hda_codec *codec,
 				struct snd_dma_buffer *dmab) {}
 #endif
 
-/*
- * Codec modularization
- */
-
-/* Export symbols only for communication with codec drivers;
- * When built in kernel, all HD-audio drivers are supposed to be statically
- * linked to the kernel.  Thus, the symbols don't have to (or shouldn't) be
- * exported unless it's built as a module.
- */
-#ifdef MODULE
 #define EXPORT_SYMBOL_HDA(sym) EXPORT_SYMBOL_GPL(sym)
-#else
-#define EXPORT_SYMBOL_HDA(sym)
-#endif
 
 #endif /* __SOUND_HDA_CODEC_H */

sound/pci/hda/hda_generic.c

@@ -28,6 +28,7 @@
 #include <linux/ctype.h>
 #include <linux/string.h>
 #include <linux/bitops.h>
+#include <linux/module.h>
 #include <sound/core.h>
 #include <sound/jack.h>
 #include "hda_codec.h"
@@ -47,7 +48,7 @@ int snd_hda_gen_spec_init(struct hda_gen_spec *spec)
 	mutex_init(&spec->pcm_mutex);
 	return 0;
 }
-EXPORT_SYMBOL_HDA(snd_hda_gen_spec_init);
+EXPORT_SYMBOL_GPL(snd_hda_gen_spec_init);
 
 struct snd_kcontrol_new *
 snd_hda_gen_add_kctl(struct hda_gen_spec *spec, const char *name,
@@ -65,7 +66,7 @@ snd_hda_gen_add_kctl(struct hda_gen_spec *spec, const char *name,
 		return NULL;
 	return knew;
 }
-EXPORT_SYMBOL_HDA(snd_hda_gen_add_kctl);
+EXPORT_SYMBOL_GPL(snd_hda_gen_add_kctl);
 
 static void free_kctls(struct hda_gen_spec *spec)
 {
@@ -86,7 +87,7 @@ void snd_hda_gen_spec_free(struct hda_gen_spec *spec)
 	snd_array_free(&spec->paths);
 	snd_array_free(&spec->loopback_list);
 }
-EXPORT_SYMBOL_HDA(snd_hda_gen_spec_free);
+EXPORT_SYMBOL_GPL(snd_hda_gen_spec_free);
 
 /*
  * store user hints
@@ -266,7 +267,7 @@ struct nid_path *snd_hda_get_nid_path(struct hda_codec *codec,
 {
 	return get_nid_path(codec, from_nid, to_nid, 0);
 }
-EXPORT_SYMBOL_HDA(snd_hda_get_nid_path);
+EXPORT_SYMBOL_GPL(snd_hda_get_nid_path);
 
 /* get the index number corresponding to the path instance;
  * the index starts from 1, for easier checking the invalid value
@@ -284,7 +285,7 @@ int snd_hda_get_path_idx(struct hda_codec *codec, struct nid_path *path)
 		return 0;
 	return idx + 1;
 }
-EXPORT_SYMBOL_HDA(snd_hda_get_path_idx);
+EXPORT_SYMBOL_GPL(snd_hda_get_path_idx);
 
 /* get the path instance corresponding to the given index number */
 struct nid_path *snd_hda_get_path_from_idx(struct hda_codec *codec, int idx)
@@ -295,7 +296,7 @@ struct nid_path *snd_hda_get_path_from_idx(struct hda_codec *codec, int idx)
 		return NULL;
 	return snd_array_elem(&spec->paths, idx - 1);
 }
-EXPORT_SYMBOL_HDA(snd_hda_get_path_from_idx);
+EXPORT_SYMBOL_GPL(snd_hda_get_path_from_idx);
 
 /* check whether the given DAC is already found in any existing paths */
 static bool is_dac_already_used(struct hda_codec *codec, hda_nid_t nid)
@@ -432,7 +433,7 @@ bool snd_hda_parse_nid_path(struct hda_codec *codec, hda_nid_t from_nid,
 	}
 	return false;
 }
-EXPORT_SYMBOL_HDA(snd_hda_parse_nid_path);
+EXPORT_SYMBOL_GPL(snd_hda_parse_nid_path);
 
 /*
  * parse the path between the given NIDs and add to the path list.
@@ -463,7 +464,7 @@ snd_hda_add_new_path(struct hda_codec *codec, hda_nid_t from_nid,
 	spec->paths.used--;
 	return NULL;
 }
-EXPORT_SYMBOL_HDA(snd_hda_add_new_path);
+EXPORT_SYMBOL_GPL(snd_hda_add_new_path);
 
 /* clear the given path as invalid so that it won't be picked up later */
 static void invalidate_nid_path(struct hda_codec *codec, int idx)
@@ -773,7 +774,7 @@ void snd_hda_activate_path(struct hda_codec *codec, struct nid_path *path,
 	if (enable)
 		path->active = true;
 }
-EXPORT_SYMBOL_HDA(snd_hda_activate_path);
+EXPORT_SYMBOL_GPL(snd_hda_activate_path);
 
 /* if the given path is inactive, put widgets into D3 (only if suitable) */
 static void path_power_down_sync(struct hda_codec *codec, struct nid_path *path)
@@ -1149,7 +1150,7 @@ const struct badness_table hda_main_out_badness = {
 	.shared_clfe = BAD_SHARED_CLFE,
 	.shared_surr_main = BAD_SHARED_SURROUND,
 };
-EXPORT_SYMBOL_HDA(hda_main_out_badness);
+EXPORT_SYMBOL_GPL(hda_main_out_badness);
 
 const struct badness_table hda_extra_out_badness = {
 	.no_primary_dac = BAD_NO_DAC,
@@ -1159,7 +1160,7 @@ const struct badness_table hda_extra_out_badness = {
 	.shared_clfe = BAD_SHARED_EXTRA_SURROUND,
 	.shared_surr_main = BAD_NO_EXTRA_SURR_DAC,
 };
-EXPORT_SYMBOL_HDA(hda_extra_out_badness);
+EXPORT_SYMBOL_GPL(hda_extra_out_badness);
 
 /* get the DAC of the primary output corresponding to the given array index */
 static hda_nid_t get_primary_out(struct hda_codec *codec, int idx)
@@ -2857,9 +2858,11 @@ static bool look_for_mix_leaf_ctls(struct hda_codec *codec, hda_nid_t mix_nid,
 	if (num_conns < idx)
 		return false;
 	nid = list[idx];
-	if (!*mix_val && nid_has_volume(codec, nid, HDA_OUTPUT))
+	if (!*mix_val && nid_has_volume(codec, nid, HDA_OUTPUT) &&
+	    !is_ctl_associated(codec, nid, HDA_OUTPUT, 0, NID_PATH_VOL_CTL))
 		*mix_val = HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_OUTPUT);
-	if (!*mute_val && nid_has_mute(codec, nid, HDA_OUTPUT))
+	if (!*mute_val && nid_has_mute(codec, nid, HDA_OUTPUT) &&
+	    !is_ctl_associated(codec, nid, HDA_OUTPUT, 0, NID_PATH_MUTE_CTL))
 		*mute_val = HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_OUTPUT);
 
 	return *mix_val || *mute_val;
@@ -3053,6 +3056,8 @@ static int parse_capture_source(struct hda_codec *codec, hda_nid_t pin,
 			spec->imux_pins[imux->num_items] = pin;
 			snd_hda_add_imux_item(imux, label, cfg_idx, NULL);
 			imux_added = true;
+			if (spec->dyn_adc_switch)
+				spec->dyn_adc_idx[imux_idx] = c;
 		}
 	}
 
@@ -3150,7 +3155,9 @@ static int create_input_ctls(struct hda_codec *codec)
 		}
 	}
 
-	if (mixer && spec->add_stereo_mix_input) {
+	/* add stereo mix when explicitly enabled via hint */
+	if (mixer && spec->add_stereo_mix_input &&
+	    snd_hda_get_bool_hint(codec, "add_stereo_mix_input") > 0) {
 		err = parse_capture_source(codec, mixer, CFG_IDX_MIX, num_adcs,
 					   "Stereo Mix", 0);
 		if (err < 0)
@@ -3916,7 +3923,7 @@ void snd_hda_gen_update_outputs(struct hda_codec *codec)
 	do_automute(codec, ARRAY_SIZE(spec->autocfg.line_out_pins),
 		    spec->autocfg.line_out_pins, paths, on);
 }
-EXPORT_SYMBOL_HDA(snd_hda_gen_update_outputs);
+EXPORT_SYMBOL_GPL(snd_hda_gen_update_outputs);
 
 static void call_update_outputs(struct hda_codec *codec)
 {
@@ -3949,7 +3956,7 @@ void snd_hda_gen_hp_automute(struct hda_codec *codec, struct hda_jack_tbl *jack)
 		return;
 	call_update_outputs(codec);
 }
-EXPORT_SYMBOL_HDA(snd_hda_gen_hp_automute);
+EXPORT_SYMBOL_GPL(snd_hda_gen_hp_automute);
 
 /* standard line-out-automute helper */
 void snd_hda_gen_line_automute(struct hda_codec *codec, struct hda_jack_tbl *jack)
@@ -3969,7 +3976,7 @@ void snd_hda_gen_line_automute(struct hda_codec *codec, struct hda_jack_tbl *jac
 		return;
 	call_update_outputs(codec);
 }
-EXPORT_SYMBOL_HDA(snd_hda_gen_line_automute);
+EXPORT_SYMBOL_GPL(snd_hda_gen_line_automute);
 
 /* standard mic auto-switch helper */
 void snd_hda_gen_mic_autoswitch(struct hda_codec *codec, struct hda_jack_tbl *jack)
@@ -3992,7 +3999,7 @@ void snd_hda_gen_mic_autoswitch(struct hda_codec *codec, struct hda_jack_tbl *ja
 	}
 	mux_select(codec, 0, spec->am_entry[0].idx);
 }
-EXPORT_SYMBOL_HDA(snd_hda_gen_mic_autoswitch);
+EXPORT_SYMBOL_GPL(snd_hda_gen_mic_autoswitch);
 
 /* call appropriate hooks */
 static void call_hp_automute(struct hda_codec *codec, struct hda_jack_tbl *jack)
@@ -4305,11 +4312,11 @@ static int check_auto_mic_availability(struct hda_codec *codec)
 }
 
 /* power_filter hook; make inactive widgets into power down */
-static unsigned int snd_hda_gen_path_power_filter(struct hda_codec *codec,
+unsigned int snd_hda_gen_path_power_filter(struct hda_codec *codec,
 						  hda_nid_t nid,
 						  unsigned int power_state)
 {
-	if (power_state != AC_PWRST_D0)
+	if (power_state != AC_PWRST_D0 || nid == codec->afg)
 		return power_state;
 	if (get_wcaps_type(get_wcaps(codec, nid)) >= AC_WID_POWER)
 		return power_state;
@@ -4317,6 +4324,7 @@ static unsigned int snd_hda_gen_path_power_filter(struct hda_codec *codec,
 		return power_state;
 	return AC_PWRST_D3;
 }
+EXPORT_SYMBOL_GPL(snd_hda_gen_path_power_filter);
 
 /* mute all aamix inputs initially; parse up to the first leaves */
 static void mute_all_mixer_nid(struct hda_codec *codec, hda_nid_t mix)
@@ -4374,7 +4382,8 @@ int snd_hda_gen_parse_auto_config(struct hda_codec *codec,
 			spec->no_analog = 1;
 			goto dig_only;
 		}
-		return 0; /* can't find valid BIOS pin config */
+		if (!cfg->num_inputs && !cfg->dig_in_pin)
+			return 0; /* can't find valid BIOS pin config */
 	}
 
 	if (!spec->no_primary_hp &&
@@ -4442,6 +4451,19 @@ int snd_hda_gen_parse_auto_config(struct hda_codec *codec,
 	if (err < 0)
 		return err;
 
+	/* add stereo mix if available and not enabled yet */
+	if (!spec->auto_mic && spec->mixer_nid &&
+	    spec->add_stereo_mix_input &&
+	    spec->input_mux.num_items > 1 &&
+	    snd_hda_get_bool_hint(codec, "add_stereo_mix_input") < 0) {
+		err = parse_capture_source(codec, spec->mixer_nid,
+					   CFG_IDX_MIX, spec->num_all_adcs,
+					   "Stereo Mix", 0);
+		if (err < 0)
+			return err;
+	}
+
+
 	err = create_capture_mixers(codec);
 	if (err < 0)
 		return err;
@@ -4494,7 +4516,7 @@ int snd_hda_gen_parse_auto_config(struct hda_codec *codec,
 
 	return 1;
 }
-EXPORT_SYMBOL_HDA(snd_hda_gen_parse_auto_config);
+EXPORT_SYMBOL_GPL(snd_hda_gen_parse_auto_config);
 
 
 /*
@@ -4576,7 +4598,7 @@ int snd_hda_gen_build_controls(struct hda_codec *codec)
 
 	return 0;
 }
-EXPORT_SYMBOL_HDA(snd_hda_gen_build_controls);
+EXPORT_SYMBOL_GPL(snd_hda_gen_build_controls);
 
 
 /*
@@ -5109,7 +5131,7 @@ int snd_hda_gen_build_pcms(struct hda_codec *codec)
 
 	return 0;
 }
-EXPORT_SYMBOL_HDA(snd_hda_gen_build_pcms);
+EXPORT_SYMBOL_GPL(snd_hda_gen_build_pcms);
 
 
 /*
@@ -5183,6 +5205,23 @@ static void init_multi_io(struct hda_codec *codec)
 	}
 }
 
+static void init_aamix_paths(struct hda_codec *codec)
+{
+	struct hda_gen_spec *spec = codec->spec;
+
+	if (!spec->have_aamix_ctl)
+		return;
+	update_aamix_paths(codec, spec->aamix_mode, spec->out_paths[0],
+			   spec->aamix_out_paths[0],
+			   spec->autocfg.line_out_type);
+	update_aamix_paths(codec, spec->aamix_mode, spec->hp_paths[0],
+			   spec->aamix_out_paths[1],
+			   AUTO_PIN_HP_OUT);
+	update_aamix_paths(codec, spec->aamix_mode, spec->speaker_paths[0],
+			   spec->aamix_out_paths[2],
+			   AUTO_PIN_SPEAKER_OUT);
+}
+
 /* set up input pins and loopback paths */
 static void init_analog_input(struct hda_codec *codec)
 {
@@ -5285,6 +5324,7 @@ int snd_hda_gen_init(struct hda_codec *codec)
 	init_multi_out(codec);
 	init_extra_out(codec);
 	init_multi_io(codec);
+	init_aamix_paths(codec);
 	init_analog_input(codec);
 	init_input_src(codec);
 	init_digital(codec);
@@ -5302,7 +5342,7 @@ int snd_hda_gen_init(struct hda_codec *codec)
 	hda_call_check_power_status(codec, 0x01);
 	return 0;
 }
-EXPORT_SYMBOL_HDA(snd_hda_gen_init);
+EXPORT_SYMBOL_GPL(snd_hda_gen_init);
 
 /*
  * free the generic spec;
@@ -5315,7 +5355,7 @@ void snd_hda_gen_free(struct hda_codec *codec)
 	kfree(codec->spec);
 	codec->spec = NULL;
 }
-EXPORT_SYMBOL_HDA(snd_hda_gen_free);
+EXPORT_SYMBOL_GPL(snd_hda_gen_free);
 
 #ifdef CONFIG_PM
 /*
@@ -5327,7 +5367,7 @@ int snd_hda_gen_check_power_status(struct hda_codec *codec, hda_nid_t nid)
 	struct hda_gen_spec *spec = codec->spec;
 	return snd_hda_check_amp_list_power(codec, &spec->loopback, nid);
 }
-EXPORT_SYMBOL_HDA(snd_hda_gen_check_power_status);
+EXPORT_SYMBOL_GPL(snd_hda_gen_check_power_status);
 #endif
 
 
@@ -5372,4 +5412,7 @@ error:
 	snd_hda_gen_free(codec);
 	return err;
 }
-EXPORT_SYMBOL_HDA(snd_hda_parse_generic_codec);
+EXPORT_SYMBOL_GPL(snd_hda_parse_generic_codec);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Generic HD-audio codec parser");

sound/pci/hda/hda_generic.h

@@ -335,5 +335,8 @@ void snd_hda_gen_update_outputs(struct hda_codec *codec);
 #ifdef CONFIG_PM
 int snd_hda_gen_check_power_status(struct hda_codec *codec, hda_nid_t nid);
 #endif
+unsigned int snd_hda_gen_path_power_filter(struct hda_codec *codec,
+					   hda_nid_t nid,
+					   unsigned int power_state);
 
 #endif /* __SOUND_HDA_GENERIC_H */

sound/pci/hda/hda_hwdep.c

@@ -616,7 +616,7 @@ const char *snd_hda_get_hint(struct hda_codec *codec, const char *key)
 	struct hda_hint *hint = get_hint(codec, key);
 	return hint ? hint->val : NULL;
 }
-EXPORT_SYMBOL_HDA(snd_hda_get_hint);
+EXPORT_SYMBOL_GPL(snd_hda_get_hint);
 
 int snd_hda_get_bool_hint(struct hda_codec *codec, const char *key)
 {
@@ -642,7 +642,7 @@ int snd_hda_get_bool_hint(struct hda_codec *codec, const char *key)
 	mutex_unlock(&codec->user_mutex);
 	return ret;
 }
-EXPORT_SYMBOL_HDA(snd_hda_get_bool_hint);
+EXPORT_SYMBOL_GPL(snd_hda_get_bool_hint);
 
 int snd_hda_get_int_hint(struct hda_codec *codec, const char *key, int *valp)
 {
@@ -663,7 +663,7 @@ int snd_hda_get_int_hint(struct hda_codec *codec, const char *key, int *valp)
 	mutex_unlock(&codec->user_mutex);
 	return ret;
 }
-EXPORT_SYMBOL_HDA(snd_hda_get_int_hint);
+EXPORT_SYMBOL_GPL(snd_hda_get_int_hint);
 #endif /* CONFIG_SND_HDA_RECONFIG */
 
 #ifdef CONFIG_SND_HDA_PATCH_LOADER
@@ -762,20 +762,50 @@ DEFINE_PARSE_ID_MODE(revision_id);
 
 struct hda_patch_item {
 	const char *tag;
+	const char *alias;
 	void (*parser)(char *buf, struct hda_bus *bus, struct hda_codec **retc);
-	int need_codec;
 };
 
 static struct hda_patch_item patch_items[NUM_LINE_MODES] = {
-	[LINE_MODE_CODEC] = { "[codec]", parse_codec_mode, 0 },
+	[LINE_MODE_CODEC] = {
-	[LINE_MODE_MODEL] = { "[model]", parse_model_mode, 1 },
+		.tag = "[codec]",
-	[LINE_MODE_VERB] = { "[verb]", parse_verb_mode, 1 },
+		.parser = parse_codec_mode,
-	[LINE_MODE_PINCFG] = { "[pincfg]", parse_pincfg_mode, 1 },
+	},
-	[LINE_MODE_HINT] = { "[hint]", parse_hint_mode, 1 },
+	[LINE_MODE_MODEL] = {
-	[LINE_MODE_VENDOR_ID] = { "[vendor_id]", parse_vendor_id_mode, 1 },
+		.tag = "[model]",
-	[LINE_MODE_SUBSYSTEM_ID] = { "[subsystem_id]", parse_subsystem_id_mode, 1 },
+		.parser = parse_model_mode,
-	[LINE_MODE_REVISION_ID] = { "[revision_id]", parse_revision_id_mode, 1 },
+	},
-	[LINE_MODE_CHIP_NAME] = { "[chip_name]", parse_chip_name_mode, 1 },
+	[LINE_MODE_VERB] = {
+		.tag = "[verb]",
+		.alias = "[init_verbs]",
+		.parser = parse_verb_mode,
+	},
+	[LINE_MODE_PINCFG] = {
+		.tag = "[pincfg]",
+		.alias = "[user_pin_configs]",
+		.parser = parse_pincfg_mode,
+	},
+	[LINE_MODE_HINT] = {
+		.tag = "[hint]",
+		.alias = "[hints]",
+		.parser = parse_hint_mode
+	},
+	[LINE_MODE_VENDOR_ID] = {
+		.tag = "[vendor_id]",
+		.parser = parse_vendor_id_mode,
+	},
+	[LINE_MODE_SUBSYSTEM_ID] = {
+		.tag = "[subsystem_id]",
+		.parser = parse_subsystem_id_mode,
+	},
+	[LINE_MODE_REVISION_ID] = {
+		.tag = "[revision_id]",
+		.parser = parse_revision_id_mode,
+	},
+	[LINE_MODE_CHIP_NAME] = {
+		.tag = "[chip_name]",
+		.parser = parse_chip_name_mode,
+	},
 };
 
 /* check the line starting with '[' -- change the parser mode accodingly */
@@ -787,6 +817,8 @@ static int parse_line_mode(char *buf, struct hda_bus *bus)
 			continue;
 		if (strmatch(buf, patch_items[i].tag))
 			return i;
+		if (patch_items[i].alias && strmatch(buf, patch_items[i].alias))
+			return i;
 	}
 	return LINE_MODE_NONE;
 }
@@ -846,10 +878,10 @@ int snd_hda_load_patch(struct hda_bus *bus, size_t fw_size, const void *fw_buf)
 		if (*buf == '[')
 			line_mode = parse_line_mode(buf, bus);
 		else if (patch_items[line_mode].parser &&
-			 (codec || !patch_items[line_mode].need_codec))
+			 (codec || line_mode <= LINE_MODE_CODEC))
 			patch_items[line_mode].parser(buf, bus, &codec);
 	}
 	return 0;
 }
-EXPORT_SYMBOL_HDA(snd_hda_load_patch);
+EXPORT_SYMBOL_GPL(snd_hda_load_patch);
 #endif /* CONFIG_SND_HDA_PATCH_LOADER */

sound/pci/hda/hda_intel.c

@@ -297,9 +297,9 @@ enum { SDI0, SDI1, SDI2, SDI3, SDO0, SDO1, SDO2, SDO3 };
 #define ULI_NUM_CAPTURE		5
 #define ULI_NUM_PLAYBACK	6
 
-/* ATI HDMI has 1 playback and 0 capture */
+/* ATI HDMI may have up to 8 playbacks and 0 capture */
 #define ATIHDMI_NUM_CAPTURE	0
-#define ATIHDMI_NUM_PLAYBACK	1
+#define ATIHDMI_NUM_PLAYBACK	8
 
 /* TERA has 4 playback and 3 capture */
 #define TERA_NUM_CAPTURE	3
@@ -431,6 +431,8 @@ struct azx_dev {
 	struct timecounter  azx_tc;
 	struct cyclecounter azx_cc;
 
+	int delay_negative_threshold;
+
 #ifdef CONFIG_SND_HDA_DSP_LOADER
 	struct mutex dsp_mutex;
 #endif
@@ -543,9 +545,7 @@ struct azx {
 	/* for pending irqs */
 	struct work_struct irq_pending_work;
 
-#ifdef CONFIG_SND_HDA_I915
 	struct work_struct probe_work;
-#endif
 
 	/* reboot notifier (for mysterious hangup problem at power-down) */
 	struct notifier_block reboot_notifier;
@@ -2197,6 +2197,15 @@ static int azx_pcm_prepare(struct snd_pcm_substream *substream)
 			goto unlock;
 	}
 
+	/* when LPIB delay correction gives a small negative value,
+	 * we ignore it; currently set the threshold statically to
+	 * 64 frames
+	 */
+	if (runtime->period_size > 64)
+		azx_dev->delay_negative_threshold = -frames_to_bytes(runtime, 64);
+	else
+		azx_dev->delay_negative_threshold = 0;
+
 	/* wallclk has 24Mhz clock source */
 	azx_dev->period_wallclk = (((runtime->period_size * 24000) /
 						runtime->rate) * 1000);
@@ -2449,8 +2458,12 @@ static unsigned int azx_get_position(struct azx *chip,
 			delay = pos - lpib_pos;
 		else
 			delay = lpib_pos - pos;
-		if (delay < 0)
+		if (delay < 0) {
-			delay += azx_dev->bufsize;
+			if (delay >= azx_dev->delay_negative_threshold)
+				delay = 0;
+			else
+				delay += azx_dev->bufsize;
+		}
 		if (delay >= azx_dev->period_bytes) {
 			snd_printk(KERN_WARNING SFX
 				   "%s: Unstable LPIB (%d >= %d); "
@@ -3504,12 +3517,10 @@ static void azx_check_snoop_available(struct azx *chip)
 	}
 }
 
-#ifdef CONFIG_SND_HDA_I915
 static void azx_probe_work(struct work_struct *work)
 {
 	azx_probe_continue(container_of(work, struct azx, probe_work));
 }
-#endif
 
 /*
  * constructor
@@ -3586,10 +3597,8 @@ static int azx_create(struct snd_card *card, struct pci_dev *pci,
 		return err;
 	}
 
-#ifdef CONFIG_SND_HDA_I915
 	/* continue probing in work context as may trigger request module */
 	INIT_WORK(&chip->probe_work, azx_probe_work);
-#endif
 
 	*rchip = chip;
 
@@ -3809,7 +3818,7 @@ static int azx_probe(struct pci_dev *pci,
 	static int dev;
 	struct snd_card *card;
 	struct azx *chip;
-	bool probe_now;
+	bool schedule_probe;
 	int err;
 
 	if (dev >= SNDRV_CARDS)
@@ -3848,7 +3857,7 @@ static int azx_probe(struct pci_dev *pci,
 		chip->disabled = true;
 	}
 
-	probe_now = !chip->disabled;
+	schedule_probe = !chip->disabled;
 
 #ifdef CONFIG_SND_HDA_PATCH_LOADER
 	if (patch[dev] && *patch[dev]) {
@@ -3859,25 +3868,17 @@ static int azx_probe(struct pci_dev *pci,
 					      azx_firmware_cb);
 		if (err < 0)
 			goto out_free;
-		probe_now = false; /* continued in azx_firmware_cb() */
+		schedule_probe = false; /* continued in azx_firmware_cb() */
 	}
 #endif /* CONFIG_SND_HDA_PATCH_LOADER */
 
-	/* continue probing in work context, avoid request_module deadlock */
+#ifndef CONFIG_SND_HDA_I915
-	if (probe_now && (chip->driver_caps & AZX_DCAPS_I915_POWERWELL)) {
+	if (chip->driver_caps & AZX_DCAPS_I915_POWERWELL)
-#ifdef CONFIG_SND_HDA_I915
-		probe_now = false;
-		schedule_work(&chip->probe_work);
-#else
 		snd_printk(KERN_ERR SFX "Haswell must build in CONFIG_SND_HDA_I915\n");
 #endif
-	}
 
-	if (probe_now) {
+	if (schedule_probe)
-		err = azx_probe_continue(chip);
+		schedule_work(&chip->probe_work);
-		if (err < 0)
-			goto out_free;
-	}
 
 	dev++;
 	if (chip->disabled)
@@ -3983,7 +3984,7 @@ static DEFINE_PCI_DEVICE_TABLE(azx_ids) = {
 	  .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_PCH_NOPM },
 	/* Panther Point */
 	{ PCI_DEVICE(0x8086, 0x1e20),
-	  .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_PCH_NOPM },
+	  .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_PCH },
 	/* Lynx Point */
 	{ PCI_DEVICE(0x8086, 0x8c20),
 	  .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_PCH },
@@ -4008,6 +4009,9 @@ static DEFINE_PCI_DEVICE_TABLE(azx_ids) = {
 	  .driver_data = AZX_DRIVER_HDMI | AZX_DCAPS_INTEL_HASWELL },
 	{ PCI_DEVICE(0x8086, 0x0d0c),
 	  .driver_data = AZX_DRIVER_HDMI | AZX_DCAPS_INTEL_HASWELL },
+	/* Broadwell */
+	{ PCI_DEVICE(0x8086, 0x160c),
+	  .driver_data = AZX_DRIVER_HDMI | AZX_DCAPS_INTEL_HASWELL },
 	/* 5 Series/3400 */
 	{ PCI_DEVICE(0x8086, 0x3b56),
 	  .driver_data = AZX_DRIVER_SCH | AZX_DCAPS_INTEL_PCH_NOPM },

sound/pci/hda/hda_jack.c

@@ -34,7 +34,7 @@ bool is_jack_detectable(struct hda_codec *codec, hda_nid_t nid)
 		return false;
 	return true;
 }
-EXPORT_SYMBOL_HDA(is_jack_detectable);
+EXPORT_SYMBOL_GPL(is_jack_detectable);
 
 /* execute pin sense measurement */
 static u32 read_pin_sense(struct hda_codec *codec, hda_nid_t nid)
@@ -71,7 +71,7 @@ snd_hda_jack_tbl_get(struct hda_codec *codec, hda_nid_t nid)
 			return jack;
 	return NULL;
 }
-EXPORT_SYMBOL_HDA(snd_hda_jack_tbl_get);
+EXPORT_SYMBOL_GPL(snd_hda_jack_tbl_get);
 
 /**
  * snd_hda_jack_tbl_get_from_tag - query the jack-table entry for the given tag
@@ -89,7 +89,7 @@ snd_hda_jack_tbl_get_from_tag(struct hda_codec *codec, unsigned char tag)
 			return jack;
 	return NULL;
 }
-EXPORT_SYMBOL_HDA(snd_hda_jack_tbl_get_from_tag);
+EXPORT_SYMBOL_GPL(snd_hda_jack_tbl_get_from_tag);
 
 /**
  * snd_hda_jack_tbl_new - create a jack-table entry for the given NID
@@ -108,7 +108,7 @@ snd_hda_jack_tbl_new(struct hda_codec *codec, hda_nid_t nid)
 	jack->tag = codec->jacktbl.used;
 	return jack;
 }
-EXPORT_SYMBOL_HDA(snd_hda_jack_tbl_new);
+EXPORT_SYMBOL_GPL(snd_hda_jack_tbl_new);
 
 void snd_hda_jack_tbl_clear(struct hda_codec *codec)
 {
@@ -172,7 +172,7 @@ void snd_hda_jack_set_dirty_all(struct hda_codec *codec)
 		if (jack->nid)
 			jack->jack_dirty = 1;
 }
-EXPORT_SYMBOL_HDA(snd_hda_jack_set_dirty_all);
+EXPORT_SYMBOL_GPL(snd_hda_jack_set_dirty_all);
 
 /**
  * snd_hda_pin_sense - execute pin sense measurement
@@ -191,7 +191,7 @@ u32 snd_hda_pin_sense(struct hda_codec *codec, hda_nid_t nid)
 	}
 	return read_pin_sense(codec, nid);
 }
-EXPORT_SYMBOL_HDA(snd_hda_pin_sense);
+EXPORT_SYMBOL_GPL(snd_hda_pin_sense);
 
 /**
  * snd_hda_jack_detect_state - query pin Presence Detect status
@@ -211,7 +211,7 @@ int snd_hda_jack_detect_state(struct hda_codec *codec, hda_nid_t nid)
 	else
 		return HDA_JACK_NOT_PRESENT;
 }
-EXPORT_SYMBOL_HDA(snd_hda_jack_detect_state);
+EXPORT_SYMBOL_GPL(snd_hda_jack_detect_state);
 
 /**
  * snd_hda_jack_detect_enable - enable the jack-detection
@@ -236,14 +236,14 @@ int snd_hda_jack_detect_enable_callback(struct hda_codec *codec, hda_nid_t nid,
 					 AC_VERB_SET_UNSOLICITED_ENABLE,
 					 AC_USRSP_EN | jack->tag);
 }
-EXPORT_SYMBOL_HDA(snd_hda_jack_detect_enable_callback);
+EXPORT_SYMBOL_GPL(snd_hda_jack_detect_enable_callback);
 
 int snd_hda_jack_detect_enable(struct hda_codec *codec, hda_nid_t nid,
 			       unsigned char action)
 {
 	return snd_hda_jack_detect_enable_callback(codec, nid, action, NULL);
 }
-EXPORT_SYMBOL_HDA(snd_hda_jack_detect_enable);
+EXPORT_SYMBOL_GPL(snd_hda_jack_detect_enable);
 
 /**
  * snd_hda_jack_set_gating_jack - Set gating jack.
@@ -264,7 +264,7 @@ int snd_hda_jack_set_gating_jack(struct hda_codec *codec, hda_nid_t gated_nid,
 
 	return 0;
 }
-EXPORT_SYMBOL_HDA(snd_hda_jack_set_gating_jack);
+EXPORT_SYMBOL_GPL(snd_hda_jack_set_gating_jack);
 
 /**
  * snd_hda_jack_report_sync - sync the states of all jacks and report if changed
@@ -297,7 +297,7 @@ void snd_hda_jack_report_sync(struct hda_codec *codec)
 #endif
 		}
 }
-EXPORT_SYMBOL_HDA(snd_hda_jack_report_sync);
+EXPORT_SYMBOL_GPL(snd_hda_jack_report_sync);
 
 #ifdef CONFIG_SND_HDA_INPUT_JACK
 /* guess the jack type from the pin-config */
@@ -377,7 +377,7 @@ int snd_hda_jack_add_kctl(struct hda_codec *codec, hda_nid_t nid,
 {
 	return __snd_hda_jack_add_kctl(codec, nid, name, idx, false);
 }
-EXPORT_SYMBOL_HDA(snd_hda_jack_add_kctl);
+EXPORT_SYMBOL_GPL(snd_hda_jack_add_kctl);
 
 /* get the unique index number for the given kctl name */
 static int get_unique_index(struct hda_codec *codec, const char *name, int idx)
@@ -493,7 +493,7 @@ int snd_hda_jack_add_kctls(struct hda_codec *codec,
 		return err;
 	return 0;
 }
-EXPORT_SYMBOL_HDA(snd_hda_jack_add_kctls);
+EXPORT_SYMBOL_GPL(snd_hda_jack_add_kctls);
 
 static void call_jack_callback(struct hda_codec *codec,
 			       struct hda_jack_tbl *jack)
@@ -521,7 +521,7 @@ void snd_hda_jack_unsol_event(struct hda_codec *codec, unsigned int res)
 	call_jack_callback(codec, event);
 	snd_hda_jack_report_sync(codec);
 }
-EXPORT_SYMBOL_HDA(snd_hda_jack_unsol_event);
+EXPORT_SYMBOL_GPL(snd_hda_jack_unsol_event);
 
 void snd_hda_jack_poll_all(struct hda_codec *codec)
 {
@@ -542,5 +542,5 @@ void snd_hda_jack_poll_all(struct hda_codec *codec)
 	if (changes)
 		snd_hda_jack_report_sync(codec);
 }
-EXPORT_SYMBOL_HDA(snd_hda_jack_poll_all);
+EXPORT_SYMBOL_GPL(snd_hda_jack_poll_all);
 

sound/pci/hda/hda_local.h

@@ -352,14 +352,8 @@ int snd_hda_multi_out_analog_cleanup(struct hda_codec *codec,
 /*
  * generic codec parser
  */
-#ifdef CONFIG_SND_HDA_GENERIC
 int snd_hda_parse_generic_codec(struct hda_codec *codec);
-#else
+int snd_hda_parse_hdmi_codec(struct hda_codec *codec);
-static inline int snd_hda_parse_generic_codec(struct hda_codec *codec)
-{
-	return -ENODEV;
-}
-#endif
 
 /*
  * generic proc interface

sound/pci/hda/patch_analog.c

@@ -185,7 +185,7 @@ static const struct hda_codec_ops ad198x_auto_patch_ops = {
 };
 
 
-static int ad198x_parse_auto_config(struct hda_codec *codec)
+static int ad198x_parse_auto_config(struct hda_codec *codec, bool indep_hp)
 {
 	struct ad198x_spec *spec = codec->spec;
 	struct auto_pin_cfg *cfg = &spec->gen.autocfg;
@@ -195,7 +195,8 @@ static int ad198x_parse_auto_config(struct hda_codec *codec)
 	codec->no_trigger_sense = 1;
 	codec->no_sticky_stream = 1;
 
-	spec->gen.indep_hp = 1;
+	spec->gen.indep_hp = indep_hp;
+	spec->gen.add_stereo_mix_input = 1;
 
 	err = snd_hda_parse_pin_defcfg(codec, cfg, NULL, 0);
 	if (err < 0)
@@ -280,11 +281,11 @@ static const struct hda_fixup ad1986a_fixups[] = {
 		.v.pins = (const struct hda_pintbl[]) {
 			{ 0x1a, 0x02214021 }, /* headphone */
 			{ 0x1b, 0x01014011 }, /* front */
-			{ 0x1c, 0x01013012 }, /* surround */
+			{ 0x1c, 0x01813030 }, /* line-in */
-			{ 0x1d, 0x01019015 }, /* clfe */
+			{ 0x1d, 0x01a19020 }, /* rear mic */
 			{ 0x1e, 0x411111f0 }, /* N/A */
 			{ 0x1f, 0x02a190f0 }, /* mic */
-			{ 0x20, 0x018130f0 }, /* line-in */
+			{ 0x20, 0x411111f0 }, /* N/A */
 			{}
 		},
 	},
@@ -378,7 +379,7 @@ static int patch_ad1986a(struct hda_codec *codec)
 			   ad1986a_fixups);
 	snd_hda_apply_fixup(codec, HDA_FIXUP_ACT_PRE_PROBE);
 
-	err = ad198x_parse_auto_config(codec);
+	err = ad198x_parse_auto_config(codec, false);
 	if (err < 0) {
 		snd_hda_gen_free(codec);
 		return err;
@@ -480,7 +481,7 @@ static int patch_ad1983(struct hda_codec *codec)
 
 	spec->gen.beep_nid = 0x10;
 	set_beep_amp(spec, 0x10, 0, HDA_OUTPUT);
-	err = ad198x_parse_auto_config(codec);
+	err = ad198x_parse_auto_config(codec, false);
 	if (err < 0)
 		goto error;
 	err = ad1983_add_spdif_mux_ctl(codec);
@@ -567,7 +568,7 @@ static int patch_ad1981(struct hda_codec *codec)
 	snd_hda_pick_fixup(codec, NULL, ad1981_fixup_tbl, ad1981_fixups);
 	snd_hda_apply_fixup(codec, HDA_FIXUP_ACT_PRE_PROBE);
 
-	err = ad198x_parse_auto_config(codec);
+	err = ad198x_parse_auto_config(codec, false);
 	if (err < 0)
 		goto error;
 	err = ad1983_add_spdif_mux_ctl(codec);
@@ -893,7 +894,7 @@ static int patch_ad1988(struct hda_codec *codec)
 	snd_hda_pick_fixup(codec, ad1988_fixup_models, NULL, ad1988_fixups);
 	snd_hda_apply_fixup(codec, HDA_FIXUP_ACT_PRE_PROBE);
 
-	err = ad198x_parse_auto_config(codec);
+	err = ad198x_parse_auto_config(codec, true);
 	if (err < 0)
 		goto error;
 	err = ad1988_add_spdif_mux_ctl(codec);
@@ -1070,7 +1071,7 @@ static int patch_ad1884(struct hda_codec *codec)
 	snd_hda_pick_fixup(codec, NULL, ad1884_fixup_tbl, ad1884_fixups);
 	snd_hda_apply_fixup(codec, HDA_FIXUP_ACT_PRE_PROBE);
 
-	err = ad198x_parse_auto_config(codec);
+	err = ad198x_parse_auto_config(codec, true);
 	if (err < 0)
 		goto error;
 	err = ad1983_add_spdif_mux_ctl(codec);
@@ -1112,7 +1113,7 @@ static int patch_ad1882(struct hda_codec *codec)
 	spec->gen.mixer_merge_nid = 0x21;
 	spec->gen.beep_nid = 0x10;
 	set_beep_amp(spec, 0x10, 0, HDA_OUTPUT);
-	err = ad198x_parse_auto_config(codec);
+	err = ad198x_parse_auto_config(codec, true);
 	if (err < 0)
 		goto error;
 	err = ad1988_add_spdif_mux_ctl(codec);

sound/pci/hda/patch_conexant.c

@@ -3240,102 +3240,8 @@ enum {
 	CXT_FIXUP_THINKPAD_ACPI,
 };
 
-#if IS_ENABLED(CONFIG_THINKPAD_ACPI)
+/* for hda_fixup_thinkpad_acpi() */
-
+#include "thinkpad_helper.c"
-#include <linux/thinkpad_acpi.h>
-#include <acpi/acpi.h>
-
-static int (*led_set_func)(int, bool);
-
-static acpi_status acpi_check_cb(acpi_handle handle, u32 lvl, void *context,
-				 void **rv)
-{
-	bool *found = context;
-	*found = true;
-	return AE_OK;
-}
-
-static bool is_thinkpad(struct hda_codec *codec)
-{
-	bool found = false;
-	if (codec->subsystem_id >> 16 != 0x17aa)
-		return false;
-	if (ACPI_SUCCESS(acpi_get_devices("LEN0068", acpi_check_cb, &found, NULL)) && found)
-		return true;
-	found = false;
-	return ACPI_SUCCESS(acpi_get_devices("IBM0068", acpi_check_cb, &found, NULL)) && found;
-}
-
-static void update_tpacpi_mute_led(void *private_data, int enabled)
-{
-	struct hda_codec *codec = private_data;
-	struct conexant_spec *spec = codec->spec;
-
-	if (spec->dynamic_eapd)
-		cx_auto_vmaster_hook(private_data, enabled);
-
-	if (led_set_func)
-		led_set_func(TPACPI_LED_MUTE, !enabled);
-}
-
-static void update_tpacpi_micmute_led(struct hda_codec *codec,
-				      struct snd_ctl_elem_value *ucontrol)
-{
-	if (!ucontrol || !led_set_func)
-		return;
-	if (strcmp("Capture Switch", ucontrol->id.name) == 0 && ucontrol->id.index == 0) {
-		/* TODO: How do I verify if it's a mono or stereo here? */
-		bool val = ucontrol->value.integer.value[0] || ucontrol->value.integer.value[1];
-		led_set_func(TPACPI_LED_MICMUTE, !val);
-	}
-}
-
-static void cxt_fixup_thinkpad_acpi(struct hda_codec *codec,
-				  const struct hda_fixup *fix, int action)
-{
-	struct conexant_spec *spec = codec->spec;
-
-	bool removefunc = false;
-
-	if (action == HDA_FIXUP_ACT_PROBE) {
-		if (!is_thinkpad(codec))
-			return;
-		if (!led_set_func)
-			led_set_func = symbol_request(tpacpi_led_set);
-		if (!led_set_func) {
-			snd_printk(KERN_WARNING "Failed to find thinkpad-acpi symbol tpacpi_led_set\n");
-			return;
-		}
-
-		removefunc = true;
-		if (led_set_func(TPACPI_LED_MUTE, false) >= 0) {
-			spec->gen.vmaster_mute.hook = update_tpacpi_mute_led;
-			removefunc = false;
-		}
-		if (led_set_func(TPACPI_LED_MICMUTE, false) >= 0) {
-			if (spec->gen.num_adc_nids > 1)
-				snd_printdd("Skipping micmute LED control due to several ADCs");
-			else {
-				spec->gen.cap_sync_hook = update_tpacpi_micmute_led;
-				removefunc = false;
-			}
-		}
-	}
-
-	if (led_set_func && (action == HDA_FIXUP_ACT_FREE || removefunc)) {
-		symbol_put(tpacpi_led_set);
-		led_set_func = NULL;
-	}
-}
-
-#else
-
-static void cxt_fixup_thinkpad_acpi(struct hda_codec *codec,
-				  const struct hda_fixup *fix, int action)
-{
-}
-
-#endif
 
 static void cxt_fixup_stereo_dmic(struct hda_codec *codec,
 				  const struct hda_fixup *fix, int action)
@@ -3492,7 +3398,7 @@ static const struct hda_fixup cxt_fixups[] = {
 	},
 	[CXT_FIXUP_THINKPAD_ACPI] = {
 		.type = HDA_FIXUP_FUNC,
-		.v.func = cxt_fixup_thinkpad_acpi,
+		.v.func = hda_fixup_thinkpad_acpi,
 	},
 };
 

sound/pci/hda/patch_hdmi.c

@@ -46,6 +46,9 @@ module_param(static_hdmi_pcm, bool, 0644);
 MODULE_PARM_DESC(static_hdmi_pcm, "Don't restrict PCM parameters per ELD info");
 
 #define is_haswell(codec)  ((codec)->vendor_id == 0x80862807)
+#define is_broadwell(codec)    ((codec)->vendor_id == 0x80862808)
+#define is_haswell_plus(codec) (is_haswell(codec) || is_broadwell(codec))
+
 #define is_valleyview(codec) ((codec)->vendor_id == 0x80862882)
 
 struct hdmi_spec_per_cvt {
@@ -1101,7 +1104,7 @@ static void hdmi_setup_audio_infoframe(struct hda_codec *codec,
 	if (!channels)
 		return;
 
-	if (is_haswell(codec))
+	if (is_haswell_plus(codec))
 		snd_hda_codec_write(codec, pin_nid, 0,
 					    AC_VERB_SET_AMP_GAIN_MUTE,
 					    AMP_OUT_UNMUTE);
@@ -1280,7 +1283,7 @@ static int hdmi_setup_stream(struct hda_codec *codec, hda_nid_t cvt_nid,
 	struct hdmi_spec *spec = codec->spec;
 	int err;
 
-	if (is_haswell(codec))
+	if (is_haswell_plus(codec))
 		haswell_verify_D0(codec, cvt_nid, pin_nid);
 
 	err = spec->ops.pin_hbr_setup(codec, pin_nid, is_hbr_format(format));
@@ -1421,7 +1424,7 @@ static int hdmi_pcm_open(struct hda_pcm_stream *hinfo,
 			    mux_idx);
 
 	/* configure unused pins to choose other converters */
-	if (is_haswell(codec) || is_valleyview(codec))
+	if (is_haswell_plus(codec) || is_valleyview(codec))
 		intel_not_share_assigned_cvt(codec, per_pin->pin_nid, mux_idx);
 
 	snd_hda_spdif_ctls_assign(codec, pin_idx, per_cvt->cvt_nid);
@@ -1496,11 +1499,14 @@ static bool hdmi_present_sense(struct hdmi_spec_per_pin *per_pin, int repoll)
 	 * specification worked this way. Hence, we just ignore the data in
 	 * the unsolicited response to avoid custom WARs.
 	 */
-	int present = snd_hda_pin_sense(codec, pin_nid);
+	int present;
 	bool update_eld = false;
 	bool eld_changed = false;
 	bool ret;
 
+	snd_hda_power_up(codec);
+	present = snd_hda_pin_sense(codec, pin_nid);
+
 	mutex_lock(&per_pin->lock);
 	pin_eld->monitor_present = !!(present & AC_PINSENSE_PRESENCE);
 	if (pin_eld->monitor_present)
@@ -1573,6 +1579,7 @@ static bool hdmi_present_sense(struct hdmi_spec_per_pin *per_pin, int repoll)
 		jack->block_report = !ret;
 
 	mutex_unlock(&per_pin->lock);
+	snd_hda_power_down(codec);
 	return ret;
 }
 
@@ -1607,7 +1614,7 @@ static int hdmi_add_pin(struct hda_codec *codec, hda_nid_t pin_nid)
 	if (get_defcfg_connect(config) == AC_JACK_PORT_NONE)
 		return 0;
 
-	if (is_haswell(codec))
+	if (is_haswell_plus(codec))
 		intel_haswell_fixup_connect_list(codec, pin_nid);
 
 	pin_idx = spec->num_pins;
@@ -1694,21 +1701,6 @@ static int hdmi_parse_codec(struct hda_codec *codec)
 		}
 	}
 
-#ifdef CONFIG_PM
-	/* We're seeing some problems with unsolicited hot plug events on
-	 * PantherPoint after S3, if this is not enabled */
-	if (codec->vendor_id == 0x80862806)
-		codec->bus->power_keep_link_on = 1;
-	/*
-	 * G45/IbexPeak don't support EPSS: the unsolicited pin hot plug event
-	 * can be lost and presence sense verb will become inaccurate if the
-	 * HDA link is powered off at hot plug or hw initialization time.
-	 */
-	else if (!(snd_hda_param_read(codec, codec->afg, AC_PAR_POWER_STATE) &
-	      AC_PWRST_EPSS))
-		codec->bus->power_keep_link_on = 1;
-#endif
-
 	return 0;
 }
 
@@ -2260,18 +2252,22 @@ static int patch_generic_hdmi(struct hda_codec *codec)
 	codec->spec = spec;
 	hdmi_array_init(spec, 4);
 
-	if (is_haswell(codec)) {
+	if (is_haswell_plus(codec)) {
 		intel_haswell_enable_all_pins(codec, true);
 		intel_haswell_fixup_enable_dp12(codec);
 	}
 
+	if (is_haswell(codec) || is_valleyview(codec)) {
+		codec->depop_delay = 0;
+	}
+
 	if (hdmi_parse_codec(codec) < 0) {
 		codec->spec = NULL;
 		kfree(spec);
 		return -EINVAL;
 	}
 	codec->patch_ops = generic_hdmi_patch_ops;
-	if (is_haswell(codec)) {
+	if (is_haswell_plus(codec)) {
 		codec->patch_ops.set_power_state = haswell_set_power_state;
 		codec->dp_mst = true;
 	}
@@ -3217,6 +3213,15 @@ static int patch_via_hdmi(struct hda_codec *codec)
 	return patch_simple_hdmi(codec, VIAHDMI_CVT_NID, VIAHDMI_PIN_NID);
 }
 
+/*
+ * called from hda_codec.c for generic HDMI support
+ */
+int snd_hda_parse_hdmi_codec(struct hda_codec *codec)
+{
+	return patch_generic_hdmi(codec);
+}
+EXPORT_SYMBOL_GPL(snd_hda_parse_hdmi_codec);
+
 /*
  * patch entries
  */
@@ -3271,6 +3276,7 @@ static const struct hda_codec_preset snd_hda_preset_hdmi[] = {
 { .id = 0x80862805, .name = "CougarPoint HDMI",	.patch = patch_generic_hdmi },
 { .id = 0x80862806, .name = "PantherPoint HDMI", .patch = patch_generic_hdmi },
 { .id = 0x80862807, .name = "Haswell HDMI",	.patch = patch_generic_hdmi },
+{ .id = 0x80862808, .name = "Broadwell HDMI",	.patch = patch_generic_hdmi },
 { .id = 0x80862880, .name = "CedarTrail HDMI",	.patch = patch_generic_hdmi },
 { .id = 0x80862882, .name = "Valleyview2 HDMI",	.patch = patch_generic_hdmi },
 { .id = 0x808629fb, .name = "Crestline HDMI",	.patch = patch_generic_hdmi },
@@ -3326,6 +3332,7 @@ MODULE_ALIAS("snd-hda-codec-id:80862804");
 MODULE_ALIAS("snd-hda-codec-id:80862805");
 MODULE_ALIAS("snd-hda-codec-id:80862806");
 MODULE_ALIAS("snd-hda-codec-id:80862807");
+MODULE_ALIAS("snd-hda-codec-id:80862808");
 MODULE_ALIAS("snd-hda-codec-id:80862880");
 MODULE_ALIAS("snd-hda-codec-id:80862882");
 MODULE_ALIAS("snd-hda-codec-id:808629fb");

sound/pci/hda/patch_realtek.c

@@ -118,7 +118,8 @@ struct alc_spec {
 
 	int init_amp;
 	int codec_variant;	/* flag for other variants */
-	bool has_alc5505_dsp;
+	unsigned int has_alc5505_dsp:1;
+	unsigned int no_depop_delay:1;
 
 	/* for PLL fix */
 	hda_nid_t pll_nid;
@@ -280,8 +281,11 @@ static void alc_auto_setup_eapd(struct hda_codec *codec, bool on)
  */
 static void alc_eapd_shutup(struct hda_codec *codec)
 {
+	struct alc_spec *spec = codec->spec;
+
 	alc_auto_setup_eapd(codec, false);
-	msleep(200);
+	if (!spec->no_depop_delay)
+		msleep(200);
 	snd_hda_shutup_pins(codec);
 }
 
@@ -365,6 +369,17 @@ static void alc_fixup_sku_ignore(struct hda_codec *codec,
 	}
 }
 
+static void alc_fixup_no_depop_delay(struct hda_codec *codec,
+				    const struct hda_fixup *fix, int action)
+{
+	struct alc_spec *spec = codec->spec;
+
+	if (action == HDA_FIXUP_ACT_PROBE) {
+		spec->no_depop_delay = 1;
+		codec->depop_delay = 0;
+	}
+}
+
 static int alc_auto_parse_customize_define(struct hda_codec *codec)
 {
 	unsigned int ass, tmp, i;
@@ -454,9 +469,7 @@ static bool found_in_nid_list(hda_nid_t nid, const hda_nid_t *list, int nums)
  *	7  ~ 0	:	Assembly ID
  *	port-A --> pin 39/41, port-E --> pin 14/15, port-D --> pin 35/36
  */
-static int alc_subsystem_id(struct hda_codec *codec,
+static int alc_subsystem_id(struct hda_codec *codec, const hda_nid_t *ports)
-			    hda_nid_t porta, hda_nid_t porte,
-			    hda_nid_t portd, hda_nid_t porti)
 {
 	unsigned int ass, tmp, i;
 	unsigned nid;
@@ -546,14 +559,7 @@ do_sku:
 	      spec->gen.autocfg.line_out_type == AUTO_PIN_HP_OUT)) {
 		hda_nid_t nid;
 		tmp = (ass >> 11) & 0x3;	/* HP to chassis */
-		if (tmp == 0)
+		nid = ports[tmp];
-			nid = porta;
-		else if (tmp == 1)
-			nid = porte;
-		else if (tmp == 2)
-			nid = portd;
-		else if (tmp == 3)
-			nid = porti;
 		if (found_in_nid_list(nid, spec->gen.autocfg.line_out_pins,
 				      spec->gen.autocfg.line_outs))
 			return 1;
@@ -566,7 +572,7 @@ do_sku:
  * ports contains an array of 4 pin NIDs for port-A, E, D and I */
 static void alc_ssid_check(struct hda_codec *codec, const hda_nid_t *ports)
 {
-	if (!alc_subsystem_id(codec, ports[0], ports[1], ports[2], ports[3])) {
+	if (!alc_subsystem_id(codec, ports)) {
 		struct alc_spec *spec = codec->spec;
 		snd_printd("realtek: "
 			   "Enable default setup for auto mode as fallback\n");
@@ -863,7 +869,10 @@ static int alc_suspend(struct hda_codec *codec)
 #ifdef CONFIG_PM
 static int alc_resume(struct hda_codec *codec)
 {
-	msleep(150); /* to avoid pop noise */
+	struct alc_spec *spec = codec->spec;
+
+	if (!spec->no_depop_delay)
+		msleep(150); /* to avoid pop noise */
 	codec->patch_ops.init(codec);
 	snd_hda_codec_resume_amp(codec);
 	snd_hda_codec_resume_cache(codec);
@@ -903,7 +912,7 @@ static int alc_codec_rename(struct hda_codec *codec, const char *name)
 }
 
 /*
- * Rename codecs appropriately from COEF value
+ * Rename codecs appropriately from COEF value or subvendor id
  */
 struct alc_codec_rename_table {
 	unsigned int vendor_id;
@@ -912,6 +921,13 @@ struct alc_codec_rename_table {
 	const char *name;
 };
 
+struct alc_codec_rename_pci_table {
+	unsigned int codec_vendor_id;
+	unsigned short pci_subvendor;
+	unsigned short pci_subdevice;
+	const char *name;
+};
+
 static struct alc_codec_rename_table rename_tbl[] = {
 	{ 0x10ec0269, 0xfff0, 0x3010, "ALC277" },
 	{ 0x10ec0269, 0xf0f0, 0x2010, "ALC259" },
@@ -931,9 +947,20 @@ static struct alc_codec_rename_table rename_tbl[] = {
 	{ } /* terminator */
 };
 
+static struct alc_codec_rename_pci_table rename_pci_tbl[] = {
+	{ 0x10ec0280, 0x1028, 0, "ALC3220" },
+	{ 0x10ec0282, 0x1028, 0, "ALC3221" },
+	{ 0x10ec0283, 0x1028, 0, "ALC3223" },
+	{ 0x10ec0292, 0x1028, 0, "ALC3226" },
+	{ 0x10ec0255, 0x1028, 0, "ALC3234" },
+	{ 0x10ec0668, 0x1028, 0, "ALC3661" },
+	{ } /* terminator */
+};
+
 static int alc_codec_rename_from_preset(struct hda_codec *codec)
 {
 	const struct alc_codec_rename_table *p;
+	const struct alc_codec_rename_pci_table *q;
 
 	for (p = rename_tbl; p->vendor_id; p++) {
 		if (p->vendor_id != codec->vendor_id)
@@ -941,6 +968,17 @@ static int alc_codec_rename_from_preset(struct hda_codec *codec)
 		if ((alc_get_coef0(codec) & p->coef_mask) == p->coef_bits)
 			return alc_codec_rename(codec, p->name);
 	}
+
+	for (q = rename_pci_tbl; q->codec_vendor_id; q++) {
+		if (q->codec_vendor_id != codec->vendor_id)
+			continue;
+		if (q->pci_subvendor != codec->bus->pci->subsystem_vendor)
+			continue;
+		if (!q->pci_subdevice ||
+		    q->pci_subdevice == codec->bus->pci->subsystem_device)
+			return alc_codec_rename(codec, q->name);
+	}
+
 	return 0;
 }
 
@@ -1763,6 +1801,7 @@ enum {
 	ALC882_FIXUP_ACER_ASPIRE_7736,
 	ALC882_FIXUP_ASUS_W90V,
 	ALC889_FIXUP_CD,
+	ALC889_FIXUP_FRONT_HP_NO_PRESENCE,
 	ALC889_FIXUP_VAIO_TT,
 	ALC888_FIXUP_EEE1601,
 	ALC882_FIXUP_EAPD,
@@ -1980,6 +2019,15 @@ static const struct hda_fixup alc882_fixups[] = {
 			{ }
 		}
 	},
+	[ALC889_FIXUP_FRONT_HP_NO_PRESENCE] = {
+		.type = HDA_FIXUP_PINS,
+		.v.pins = (const struct hda_pintbl[]) {
+			{ 0x1b, 0x02214120 }, /* Front HP jack is flaky, disable jack detect */
+			{ }
+		},
+		.chained = true,
+		.chain_id = ALC889_FIXUP_CD,
+	},
 	[ALC889_FIXUP_VAIO_TT] = {
 		.type = HDA_FIXUP_PINS,
 		.v.pins = (const struct hda_pintbl[]) {
@@ -2211,7 +2259,7 @@ static const struct snd_pci_quirk alc882_fixup_tbl[] = {
 	SND_PCI_QUIRK(0x1071, 0x8258, "Evesham Voyaeger", ALC882_FIXUP_EAPD),
 	SND_PCI_QUIRK(0x1462, 0x7350, "MSI-7350", ALC889_FIXUP_CD),
 	SND_PCI_QUIRK_VENDOR(0x1462, "MSI", ALC882_FIXUP_GPIO3),
-	SND_PCI_QUIRK(0x1458, 0xa002, "Gigabyte EP45-DS3", ALC889_FIXUP_CD),
+	SND_PCI_QUIRK(0x1458, 0xa002, "Gigabyte EP45-DS3/Z87X-UD3H", ALC889_FIXUP_FRONT_HP_NO_PRESENCE),
 	SND_PCI_QUIRK(0x147b, 0x107a, "Abit AW9D-MAX", ALC882_FIXUP_ABIT_AW9D_MAX),
 	SND_PCI_QUIRK_VENDOR(0x1558, "Clevo laptop", ALC882_FIXUP_EAPD),
 	SND_PCI_QUIRK(0x161f, 0x2054, "Medion laptop", ALC883_FIXUP_EAPD),
@@ -2314,6 +2362,7 @@ enum {
 	ALC262_FIXUP_BENQ,
 	ALC262_FIXUP_BENQ_T31,
 	ALC262_FIXUP_INV_DMIC,
+	ALC262_FIXUP_INTEL_BAYLEYBAY,
 };
 
 static const struct hda_fixup alc262_fixups[] = {
@@ -2378,6 +2427,10 @@ static const struct hda_fixup alc262_fixups[] = {
 		.type = HDA_FIXUP_FUNC,
 		.v.func = alc_fixup_inv_dmic_0x12,
 	},
+	[ALC262_FIXUP_INTEL_BAYLEYBAY] = {
+		.type = HDA_FIXUP_FUNC,
+		.v.func = alc_fixup_no_depop_delay,
+	},
 };
 
 static const struct snd_pci_quirk alc262_fixup_tbl[] = {
@@ -2389,6 +2442,7 @@ static const struct snd_pci_quirk alc262_fixup_tbl[] = {
 	SND_PCI_QUIRK(0x17aa, 0x384e, "Lenovo 3000", ALC262_FIXUP_LENOVO_3000),
 	SND_PCI_QUIRK(0x17ff, 0x0560, "Benq ED8", ALC262_FIXUP_BENQ),
 	SND_PCI_QUIRK(0x17ff, 0x058d, "Benq T31-16", ALC262_FIXUP_BENQ_T31),
+	SND_PCI_QUIRK(0x8086, 0x7270, "BayleyBay", ALC262_FIXUP_INTEL_BAYLEYBAY),
 	{}
 };
 
@@ -3526,6 +3580,15 @@ static void alc_fixup_headset_mode_alc255(struct hda_codec *codec,
 	alc_fixup_headset_mode(codec, fix, action);
 }
 
+static void alc_fixup_auto_mute_via_amp(struct hda_codec *codec,
+					const struct hda_fixup *fix, int action)
+{
+	if (action == HDA_FIXUP_ACT_PRE_PROBE) {
+		struct alc_spec *spec = codec->spec;
+		spec->gen.auto_mute_via_amp = 1;
+	}
+}
+
 static void alc_fixup_headset_mode_alc668(struct hda_codec *codec,
 				const struct hda_fixup *fix, int action)
 {
@@ -3717,101 +3780,18 @@ static void alc282_fixup_asus_tx300(struct hda_codec *codec,
 static void alc290_fixup_mono_speakers(struct hda_codec *codec,
 				       const struct hda_fixup *fix, int action)
 {
-	if (action == HDA_FIXUP_ACT_PRE_PROBE)
+	if (action == HDA_FIXUP_ACT_PRE_PROBE) {
-		/* Remove DAC node 0x03, as it seems to be
+		/* DAC node 0x03 is giving mono output. We therefore want to
-		   giving mono output */
+		   make sure 0x14 (front speaker) and 0x15 (headphones) use the
-		snd_hda_override_wcaps(codec, 0x03, 0);
+		   stereo DAC, while leaving 0x17 (bass speaker) for node 0x03. */
-}
+		hda_nid_t conn1[2] = { 0x0c };
-
+		snd_hda_override_conn_list(codec, 0x14, 1, conn1);
-#if IS_ENABLED(CONFIG_THINKPAD_ACPI)
+		snd_hda_override_conn_list(codec, 0x15, 1, conn1);
-
-#include <linux/thinkpad_acpi.h>
-#include <acpi/acpi.h>
-
-static int (*led_set_func)(int, bool);
-
-static acpi_status acpi_check_cb(acpi_handle handle, u32 lvl, void *context,
-				 void **rv)
-{
-	bool *found = context;
-	*found = true;
-	return AE_OK;
-}
-
-static bool is_thinkpad(struct hda_codec *codec)
-{
-	bool found = false;
-	if (codec->subsystem_id >> 16 != 0x17aa)
-		return false;
-	if (ACPI_SUCCESS(acpi_get_devices("LEN0068", acpi_check_cb, &found, NULL)) && found)
-		return true;
-	found = false;
-	return ACPI_SUCCESS(acpi_get_devices("IBM0068", acpi_check_cb, &found, NULL)) && found;
-}
-
-static void update_tpacpi_mute_led(void *private_data, int enabled)
-{
-	if (led_set_func)
-		led_set_func(TPACPI_LED_MUTE, !enabled);
-}
-
-static void update_tpacpi_micmute_led(struct hda_codec *codec,
-				      struct snd_ctl_elem_value *ucontrol)
-{
-	if (!ucontrol || !led_set_func)
-		return;
-	if (strcmp("Capture Switch", ucontrol->id.name) == 0 && ucontrol->id.index == 0) {
-		/* TODO: How do I verify if it's a mono or stereo here? */
-		bool val = ucontrol->value.integer.value[0] || ucontrol->value.integer.value[1];
-		led_set_func(TPACPI_LED_MICMUTE, !val);
 	}
 }
 
-static void alc_fixup_thinkpad_acpi(struct hda_codec *codec,
+/* for hda_fixup_thinkpad_acpi() */
-				  const struct hda_fixup *fix, int action)
+#include "thinkpad_helper.c"
-{
-	struct alc_spec *spec = codec->spec;
-	bool removefunc = false;
-
-	if (action == HDA_FIXUP_ACT_PROBE) {
-		if (!is_thinkpad(codec))
-			return;
-		if (!led_set_func)
-			led_set_func = symbol_request(tpacpi_led_set);
-		if (!led_set_func) {
-			snd_printk(KERN_WARNING "Failed to find thinkpad-acpi symbol tpacpi_led_set\n");
-			return;
-		}
-
-		removefunc = true;
-		if (led_set_func(TPACPI_LED_MUTE, false) >= 0) {
-			spec->gen.vmaster_mute.hook = update_tpacpi_mute_led;
-			removefunc = false;
-		}
-		if (led_set_func(TPACPI_LED_MICMUTE, false) >= 0) {
-			if (spec->gen.num_adc_nids > 1)
-				snd_printdd("Skipping micmute LED control due to several ADCs");
-			else {
-				spec->gen.cap_sync_hook = update_tpacpi_micmute_led;
-				removefunc = false;
-			}
-		}
-	}
-
-	if (led_set_func && (action == HDA_FIXUP_ACT_FREE || removefunc)) {
-		symbol_put(tpacpi_led_set);
-		led_set_func = NULL;
-	}
-}
-
-#else
-
-static void alc_fixup_thinkpad_acpi(struct hda_codec *codec,
-				  const struct hda_fixup *fix, int action)
-{
-}
-
-#endif
 
 enum {
 	ALC269_FIXUP_SONY_VAIO,
@@ -3860,6 +3840,9 @@ enum {
 	ALC282_FIXUP_ASUS_TX300,
 	ALC283_FIXUP_INT_MIC,
 	ALC290_FIXUP_MONO_SPEAKERS,
+	ALC290_FIXUP_MONO_SPEAKERS_HSJACK,
+	ALC290_FIXUP_SUBWOOFER,
+	ALC290_FIXUP_SUBWOOFER_HSJACK,
 	ALC269_FIXUP_THINKPAD_ACPI,
 	ALC255_FIXUP_DELL1_MIC_NO_PRESENCE,
 	ALC255_FIXUP_HEADSET_MODE,
@@ -4182,15 +4165,37 @@ static const struct hda_fixup alc269_fixups[] = {
 		.chained = true,
 		.chain_id = ALC269_FIXUP_LIMIT_INT_MIC_BOOST
 	},
+	[ALC290_FIXUP_SUBWOOFER_HSJACK] = {
+		.type = HDA_FIXUP_PINS,
+		.v.pins = (const struct hda_pintbl[]) {
+			{ 0x17, 0x90170112 }, /* subwoofer */
+			{ }
+		},
+		.chained = true,
+		.chain_id = ALC290_FIXUP_MONO_SPEAKERS_HSJACK,
+	},
+	[ALC290_FIXUP_SUBWOOFER] = {
+		.type = HDA_FIXUP_PINS,
+		.v.pins = (const struct hda_pintbl[]) {
+			{ 0x17, 0x90170112 }, /* subwoofer */
+			{ }
+		},
+		.chained = true,
+		.chain_id = ALC290_FIXUP_MONO_SPEAKERS,
+	},
 	[ALC290_FIXUP_MONO_SPEAKERS] = {
 		.type = HDA_FIXUP_FUNC,
 		.v.func = alc290_fixup_mono_speakers,
+	},
+	[ALC290_FIXUP_MONO_SPEAKERS_HSJACK] = {
+		.type = HDA_FIXUP_FUNC,
+		.v.func = alc290_fixup_mono_speakers,
 		.chained = true,
 		.chain_id = ALC269_FIXUP_DELL3_MIC_NO_PRESENCE,
 	},
 	[ALC269_FIXUP_THINKPAD_ACPI] = {
 		.type = HDA_FIXUP_FUNC,
-		.v.func = alc_fixup_thinkpad_acpi,
+		.v.func = hda_fixup_thinkpad_acpi,
 	},
 	[ALC255_FIXUP_DELL1_MIC_NO_PRESENCE] = {
 		.type = HDA_FIXUP_PINS,
@@ -4229,6 +4234,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = {
 	SND_PCI_QUIRK(0x1028, 0x05cb, "Dell", ALC269_FIXUP_DELL2_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1028, 0x05cc, "Dell X5 Precision", ALC269_FIXUP_DELL2_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1028, 0x05cd, "Dell X5 Precision", ALC269_FIXUP_DELL2_MIC_NO_PRESENCE),
+	SND_PCI_QUIRK(0x1028, 0x05da, "Dell Vostro 5460", ALC290_FIXUP_SUBWOOFER),
 	SND_PCI_QUIRK(0x1028, 0x05de, "Dell", ALC269_FIXUP_DELL2_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1028, 0x05e0, "Dell", ALC269_FIXUP_DELL2_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1028, 0x05e9, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE),
@@ -4247,16 +4253,23 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = {
 	SND_PCI_QUIRK(0x1028, 0x0606, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1028, 0x0608, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1028, 0x0609, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE),
-	SND_PCI_QUIRK(0x1028, 0x0610, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE),
+	SND_PCI_QUIRK(0x1028, 0x060f, "Dell", ALC269_FIXUP_DELL3_MIC_NO_PRESENCE),
+	SND_PCI_QUIRK(0x1028, 0x0610, "Dell", ALC269_FIXUP_DELL3_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1028, 0x0613, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1028, 0x0614, "Dell Inspiron 3135", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE),
-	SND_PCI_QUIRK(0x1028, 0x0616, "Dell Vostro 5470", ALC290_FIXUP_MONO_SPEAKERS),
+	SND_PCI_QUIRK(0x1028, 0x0615, "Dell Vostro 5470", ALC290_FIXUP_SUBWOOFER_HSJACK),
+	SND_PCI_QUIRK(0x1028, 0x0616, "Dell Vostro 5470", ALC290_FIXUP_SUBWOOFER_HSJACK),
 	SND_PCI_QUIRK(0x1028, 0x061f, "Dell", ALC255_FIXUP_DELL1_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1028, 0x0629, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE),
-	SND_PCI_QUIRK(0x1028, 0x0638, "Dell Inspiron 5439", ALC290_FIXUP_MONO_SPEAKERS),
+	SND_PCI_QUIRK(0x1028, 0x0638, "Dell Inspiron 5439", ALC290_FIXUP_MONO_SPEAKERS_HSJACK),
 	SND_PCI_QUIRK(0x1028, 0x063e, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1028, 0x063f, "Dell", ALC255_FIXUP_DELL1_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1028, 0x0640, "Dell", ALC255_FIXUP_DELL1_MIC_NO_PRESENCE),
+	SND_PCI_QUIRK(0x1028, 0x0651, "Dell", ALC255_FIXUP_DELL1_MIC_NO_PRESENCE),
+	SND_PCI_QUIRK(0x1028, 0x0652, "Dell", ALC255_FIXUP_DELL1_MIC_NO_PRESENCE),
+	SND_PCI_QUIRK(0x1028, 0x0653, "Dell", ALC255_FIXUP_DELL1_MIC_NO_PRESENCE),
+	SND_PCI_QUIRK(0x1028, 0x0658, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE),
+	SND_PCI_QUIRK(0x1028, 0x0662, "Dell", ALC255_FIXUP_DELL1_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1028, 0x15cc, "Dell X5 Precision", ALC269_FIXUP_DELL2_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1028, 0x15cd, "Dell X5 Precision", ALC269_FIXUP_DELL2_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x103c, 0x1586, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC2),
@@ -4502,7 +4515,7 @@ static int patch_alc269(struct hda_codec *codec)
 	}
 
 	if (snd_hda_codec_read(codec, 0x51, 0, AC_VERB_PARAMETERS, 0) == 0x10ec5505) {
-		spec->has_alc5505_dsp = true;
+		spec->has_alc5505_dsp = 1;
 		spec->init_hook = alc5505_dsp_init;
 	}
 
@@ -4841,6 +4854,7 @@ enum {
 	ALC662_FIXUP_BASS_CHMAP,
 	ALC662_FIXUP_BASS_1A,
 	ALC662_FIXUP_BASS_1A_CHMAP,
+	ALC668_FIXUP_AUTO_MUTE,
 };
 
 static const struct hda_fixup alc662_fixups[] = {
@@ -5001,6 +5015,12 @@ static const struct hda_fixup alc662_fixups[] = {
 		.type = HDA_FIXUP_FUNC,
 		.v.func = alc_fixup_inv_dmic_0x12,
 	},
+	[ALC668_FIXUP_AUTO_MUTE] = {
+		.type = HDA_FIXUP_FUNC,
+		.v.func = alc_fixup_auto_mute_via_amp,
+		.chained = true,
+		.chain_id = ALC668_FIXUP_DELL_MIC_NO_PRESENCE
+	},
 	[ALC668_FIXUP_DELL_MIC_NO_PRESENCE] = {
 		.type = HDA_FIXUP_PINS,
 		.v.pins = (const struct hda_pintbl[]) {
@@ -5046,11 +5066,12 @@ static const struct snd_pci_quirk alc662_fixup_tbl[] = {
 	SND_PCI_QUIRK(0x1025, 0x038b, "Acer Aspire 8943G", ALC662_FIXUP_ASPIRE),
 	SND_PCI_QUIRK(0x1028, 0x05d8, "Dell", ALC668_FIXUP_DELL_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1028, 0x05db, "Dell", ALC668_FIXUP_DELL_MIC_NO_PRESENCE),
-	SND_PCI_QUIRK(0x1028, 0x0623, "Dell", ALC668_FIXUP_DELL_MIC_NO_PRESENCE),
+	SND_PCI_QUIRK(0x1028, 0x0623, "Dell", ALC668_FIXUP_AUTO_MUTE),
-	SND_PCI_QUIRK(0x1028, 0x0624, "Dell", ALC668_FIXUP_DELL_MIC_NO_PRESENCE),
+	SND_PCI_QUIRK(0x1028, 0x0624, "Dell", ALC668_FIXUP_AUTO_MUTE),
 	SND_PCI_QUIRK(0x1028, 0x0625, "Dell", ALC668_FIXUP_DELL_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1028, 0x0626, "Dell", ALC668_FIXUP_DELL_MIC_NO_PRESENCE),
-	SND_PCI_QUIRK(0x1028, 0x0628, "Dell", ALC668_FIXUP_DELL_MIC_NO_PRESENCE),
+	SND_PCI_QUIRK(0x1028, 0x0628, "Dell", ALC668_FIXUP_AUTO_MUTE),
+	SND_PCI_QUIRK(0x1028, 0x064e, "Dell", ALC668_FIXUP_DELL_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x103c, 0x1632, "HP RP5800", ALC662_FIXUP_HP_RP5800),
 	SND_PCI_QUIRK(0x1043, 0x11cd, "Asus N550", ALC662_FIXUP_BASS_1A_CHMAP),
 	SND_PCI_QUIRK(0x1043, 0x1477, "ASUS N56VZ", ALC662_FIXUP_BASS_CHMAP),

sound/pci/hda/patch_sigmatel.c

@@ -368,6 +368,17 @@ static int stac_vrefout_set(struct hda_codec *codec,
 	return 1;
 }
 
+/* prevent codec AFG to D3 state when vref-out pin is used for mute LED */
+/* this hook is set in stac_setup_gpio() */
+static unsigned int stac_vref_led_power_filter(struct hda_codec *codec,
+					       hda_nid_t nid,
+					       unsigned int power_state)
+{
+	if (nid == codec->afg && power_state == AC_PWRST_D3)
+		return AC_PWRST_D1;
+	return snd_hda_gen_path_power_filter(codec, nid, power_state);
+}
+
 /* update mute-LED accoring to the master switch */
 static void stac_update_led_status(struct hda_codec *codec, int enabled)
 {
@@ -4260,30 +4271,8 @@ static int stac_suspend(struct hda_codec *codec)
 	stac_shutup(codec);
 	return 0;
 }
-
-static void stac_set_power_state(struct hda_codec *codec, hda_nid_t fg,
-				 unsigned int power_state)
-{
-	unsigned int afg_power_state = power_state;
-	struct sigmatel_spec *spec = codec->spec;
-
-	if (power_state == AC_PWRST_D3) {
-		if (spec->vref_mute_led_nid) {
-			/* with vref-out pin used for mute led control
-			 * codec AFG is prevented from D3 state
-			 */
-			afg_power_state = AC_PWRST_D1;
-		}
-		/* this delay seems necessary to avoid click noise at power-down */
-		msleep(100);
-	}
-	snd_hda_codec_read(codec, fg, 0, AC_VERB_SET_POWER_STATE,
-			afg_power_state);
-	snd_hda_codec_set_power_to_all(codec, fg, power_state);
-}
 #else
 #define stac_suspend		NULL
-#define stac_set_power_state	NULL
 #endif /* CONFIG_PM */
 
 static const struct hda_codec_ops stac_patch_ops = {
@@ -4466,8 +4455,7 @@ static void stac_setup_gpio(struct hda_codec *codec)
 			spec->gpio_dir |= spec->gpio_led;
 			spec->gpio_data |= spec->gpio_led;
 		} else {
-			codec->patch_ops.set_power_state =
+			codec->power_filter = stac_vref_led_power_filter;
-					stac_set_power_state;
 		}
 	}
 

sound/pci/hda/patch_via.c

@@ -138,6 +138,7 @@ static struct via_spec *via_new_spec(struct hda_codec *codec)
 	spec->gen.indep_hp = 1;
 	spec->gen.keep_eapd_on = 1;
 	spec->gen.pcm_playback_hook = via_playback_pcm_hook;
+	spec->gen.add_stereo_mix_input = 1;
 	return spec;
 }
 

sound/pci/hda/thinkpad_helper.c

@@ -0,0 +1,99 @@
+/* Helper functions for Thinkpad LED control;
+ * to be included from codec driver
+ */
+
+#if IS_ENABLED(CONFIG_THINKPAD_ACPI)
+
+#include <linux/acpi.h>
+#include <linux/thinkpad_acpi.h>
+
+static int (*led_set_func)(int, bool);
+static void (*old_vmaster_hook)(void *, int);
+
+static acpi_status acpi_check_cb(acpi_handle handle, u32 lvl, void *context,
+				 void **rv)
+{
+	bool *found = context;
+	*found = true;
+	return AE_OK;
+}
+
+static bool is_thinkpad(struct hda_codec *codec)
+{
+	bool found = false;
+	if (codec->subsystem_id >> 16 != 0x17aa)
+		return false;
+	if (ACPI_SUCCESS(acpi_get_devices("LEN0068", acpi_check_cb, &found, NULL)) && found)
+		return true;
+	found = false;
+	return ACPI_SUCCESS(acpi_get_devices("IBM0068", acpi_check_cb, &found, NULL)) && found;
+}
+
+static void update_tpacpi_mute_led(void *private_data, int enabled)
+{
+	if (old_vmaster_hook)
+		old_vmaster_hook(private_data, enabled);
+
+	if (led_set_func)
+		led_set_func(TPACPI_LED_MUTE, !enabled);
+}
+
+static void update_tpacpi_micmute_led(struct hda_codec *codec,
+				      struct snd_ctl_elem_value *ucontrol)
+{
+	if (!ucontrol || !led_set_func)
+		return;
+	if (strcmp("Capture Switch", ucontrol->id.name) == 0 && ucontrol->id.index == 0) {
+		/* TODO: How do I verify if it's a mono or stereo here? */
+		bool val = ucontrol->value.integer.value[0] || ucontrol->value.integer.value[1];
+		led_set_func(TPACPI_LED_MICMUTE, !val);
+	}
+}
+
+static void hda_fixup_thinkpad_acpi(struct hda_codec *codec,
+				    const struct hda_fixup *fix, int action)
+{
+	struct hda_gen_spec *spec = codec->spec;
+	bool removefunc = false;
+
+	if (action == HDA_FIXUP_ACT_PROBE) {
+		if (!is_thinkpad(codec))
+			return;
+		if (!led_set_func)
+			led_set_func = symbol_request(tpacpi_led_set);
+		if (!led_set_func) {
+			snd_printk(KERN_WARNING "Failed to find thinkpad-acpi symbol tpacpi_led_set\n");
+			return;
+		}
+
+		removefunc = true;
+		if (led_set_func(TPACPI_LED_MUTE, false) >= 0) {
+			old_vmaster_hook = spec->vmaster_mute.hook;
+			spec->vmaster_mute.hook = update_tpacpi_mute_led;
+			removefunc = false;
+		}
+		if (led_set_func(TPACPI_LED_MICMUTE, false) >= 0) {
+			if (spec->num_adc_nids > 1)
+				snd_printdd("Skipping micmute LED control due to several ADCs");
+			else {
+				spec->cap_sync_hook = update_tpacpi_micmute_led;
+				removefunc = false;
+			}
+		}
+	}
+
+	if (led_set_func && (action == HDA_FIXUP_ACT_FREE || removefunc)) {
+		symbol_put(tpacpi_led_set);
+		led_set_func = NULL;
+		old_vmaster_hook = NULL;
+	}
+}
+
+#else /* CONFIG_THINKPAD_ACPI */
+
+static void hda_fixup_thinkpad_acpi(struct hda_codec *codec,
+				    const struct hda_fixup *fix, int action)
+{
+}
+
+#endif /* CONFIG_THINKPAD_ACPI */

sound/pci/rme9652/hdsp.c

@@ -584,10 +584,6 @@ static int snd_hammerfall_get_buffer(struct pci_dev *pci, struct snd_dma_buffer
 {
 	dmab->dev.type = SNDRV_DMA_TYPE_DEV;
 	dmab->dev.dev = snd_dma_pci_data(pci);
-	if (snd_dma_get_reserved_buf(dmab, snd_dma_pci_buf_id(pci))) {
-		if (dmab->bytes >= size)
-			return 0;
-	}
 	if (snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, snd_dma_pci_data(pci),
 				size, dmab) < 0)
 		return -ENOMEM;
@@ -596,10 +592,8 @@ static int snd_hammerfall_get_buffer(struct pci_dev *pci, struct snd_dma_buffer
 
 static void snd_hammerfall_free_buffer(struct snd_dma_buffer *dmab, struct pci_dev *pci)
 {
-	if (dmab->area) {
+	if (dmab->area)
-		dmab->dev.dev = NULL; /* make it anonymous */
+		snd_dma_free_pages(dmab);
-		snd_dma_reserve_buf(dmab, snd_dma_pci_buf_id(pci));
-	}
 }
 
 

sound/pci/rme9652/rme9652.c

@@ -285,7 +285,7 @@ static char channel_map_9636_ds[26] = {
 	/* ADAT channels are remapped */
 	1, 3, 5, 7, 9, 11, 13, 15,
 	/* channels 8 and 9 are S/PDIF */
-	24, 25
+	24, 25,
 	/* others don't exist */
 	-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1
 };
@@ -294,10 +294,6 @@ static int snd_hammerfall_get_buffer(struct pci_dev *pci, struct snd_dma_buffer
 {
 	dmab->dev.type = SNDRV_DMA_TYPE_DEV;
 	dmab->dev.dev = snd_dma_pci_data(pci);
-	if (snd_dma_get_reserved_buf(dmab, snd_dma_pci_buf_id(pci))) {
-		if (dmab->bytes >= size)
-			return 0;
-	}
 	if (snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, snd_dma_pci_data(pci),
 				size, dmab) < 0)
 		return -ENOMEM;
@@ -306,10 +302,8 @@ static int snd_hammerfall_get_buffer(struct pci_dev *pci, struct snd_dma_buffer
 
 static void snd_hammerfall_free_buffer(struct snd_dma_buffer *dmab, struct pci_dev *pci)
 {
-	if (dmab->area) {
+	if (dmab->area)
-		dmab->dev.dev = NULL; /* make it anonymous */
+		snd_dma_free_pages(dmab);
-		snd_dma_reserve_buf(dmab, snd_dma_pci_buf_id(pci));
-	}
 }