ARM: dts: rockchip: add usb nodes for rv1108 SoCs

This patch adds usb otg/host controllers and phys nodes for RV1108 SoCs.

Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This commit is contained in:
Frank Wang 2017-08-21 16:39:27 +08:00 committed by Heiko Stuebner
parent 45a7d2ca83
commit 24f9f5bb52

View File

@ -289,8 +289,35 @@
};
grf: syscon@10300000 {
compatible = "rockchip,rv1108-grf", "syscon";
compatible = "rockchip,rv1108-grf", "syscon", "simple-mfd";
reg = <0x10300000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
u2phy: usb2-phy@100 {
compatible = "rockchip,rv1108-usb2phy";
reg = <0x100 0x0c>;
clocks = <&cru SCLK_USBPHY>;
clock-names = "phyclk";
#clock-cells = <0>;
clock-output-names = "usbphy";
rockchip,usbgrf = <&usbgrf>;
status = "disabled";
u2phy_otg: otg-port {
interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "otg-mux";
#phy-cells = <0>;
status = "disabled";
};
u2phy_host: host-port {
interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "linestate";
#phy-cells = <0>;
status = "disabled";
};
};
};
watchdog: wdt@10360000 {
@ -380,6 +407,11 @@
reg = <0x20060000 0x1000>;
};
usbgrf: syscon@202a0000 {
compatible = "rockchip,rv1108-usbgrf", "syscon";
reg = <0x202a0000 0x1000>;
};
cru: clock-controller@20200000 {
compatible = "rockchip,rv1108-cru";
reg = <0x20200000 0x1000>;
@ -426,6 +458,45 @@
status = "disabled";
};
usb_host_ehci: usb@30140000 {
compatible = "generic-ehci";
reg = <0x30140000 0x20000>;
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_HOST0>, <&u2phy>;
clock-names = "usbhost", "utmi";
phys = <&u2phy_host>;
phy-names = "usb";
status = "disabled";
};
usb_host_ohci: usb@30160000 {
compatible = "generic-ohci";
reg = <0x30160000 0x20000>;
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_HOST0>, <&u2phy>;
clock-names = "usbhost", "utmi";
phys = <&u2phy_host>;
phy-names = "usb";
status = "disabled";
};
usb_otg: usb@30180000 {
compatible = "rockchip,rv1108-usb", "rockchip,rk3066-usb",
"snps,dwc2";
reg = <0x30180000 0x40000>;
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_OTG>;
clock-names = "otg";
dr_mode = "otg";
g-np-tx-fifo-size = <16>;
g-rx-fifo-size = <280>;
g-tx-fifo-size = <256 128 128 64 32 16>;
g-use-dma;
phys = <&u2phy_otg>;
phy-names = "usb2-phy";
status = "disabled";
};
gic: interrupt-controller@32010000 {
compatible = "arm,gic-400";
interrupt-controller;