selftests: net: local_termination: add PTP frames to the mix

A breakage in the felix DSA driver shows we do not have enough test
coverage. More generally, it is sufficiently special that it is likely
drivers will treat it differently.

This is not meant to be a full PTP test, it just makes sure that PTP
packets sent to the different addresses corresponding to their profiles
are received correctly. The local_termination selftest seemed like the
most appropriate place for this addition.

PTP RX/TX in some cases makes no sense (over a bridge) and this is why
$skip_ptp exists. And in others - PTP over a bridge port - the IP stack
needs convincing through the available bridge netfilter hooks to leave
the PTP packets alone and not stolen by the bridge rx_handler. It is
safe to assume that users have that figured out already. This is a
driver level test, and by using tcpdump, all that extra setup is out of
scope here.

send_non_ip() was an unfinished idea; written but never used.
Replace it with a more generic send_raw(), and send 3 PTP packet types
times 3 transports.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Vladimir Oltean 2024-08-15 03:07:00 +03:00 committed by David S. Miller
parent 9aa3749ca4
commit 2379795042

View File

@ -39,9 +39,68 @@ UNKNOWN_MACV6_MC_ADDR1="33:33:01:02:03:05"
UNKNOWN_MACV6_MC_ADDR2="33:33:01:02:03:06"
UNKNOWN_MACV6_MC_ADDR3="33:33:01:02:03:07"
NON_IP_MC="01:02:03:04:05:06"
NON_IP_PKT="00:04 48:45:4c:4f"
BC="ff:ff:ff:ff:ff:ff"
PTP_1588_L2_SYNC=" \
01:1b:19:00:00:00 00:00:de:ad:be:ef 88:f7 00 02 \
00 2c 00 00 02 00 00 00 00 00 00 00 00 00 00 00 \
00 00 3e 37 63 ff fe cf 17 0e 00 01 00 00 00 00 \
00 00 00 00 00 00 00 00 00 00"
PTP_1588_L2_FOLLOW_UP=" \
01:1b:19:00:00:00 00:00:de:ad:be:ef 88:f7 08 02 \
00 2c 00 00 00 00 00 00 00 00 00 00 00 00 00 00 \
00 00 3e 37 63 ff fe cf 17 0e 00 01 00 00 02 00 \
00 00 66 83 c5 f1 17 97 ed f0"
PTP_1588_L2_PDELAY_REQ=" \
01:80:c2:00:00:0e 00:00:de:ad:be:ef 88:f7 02 02 \
00 36 00 00 00 00 00 00 00 00 00 00 00 00 00 00 \
00 00 3e 37 63 ff fe cf 17 0e 00 01 00 06 05 7f \
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 \
00 00 00 00"
PTP_1588_IPV4_SYNC=" \
01:00:5e:00:01:81 00:00:de:ad:be:ef 08:00 45 00 \
00 48 0a 9a 40 00 01 11 cb 88 c0 00 02 01 e0 00 \
01 81 01 3f 01 3f 00 34 a3 c8 00 02 00 2c 00 00 \
02 00 00 00 00 00 00 00 00 00 00 00 00 00 3e 37 \
63 ff fe cf 17 0e 00 01 00 00 00 00 00 00 00 00 \
00 00 00 00 00 00"
PTP_1588_IPV4_FOLLOW_UP="
01:00:5e:00:01:81 00:00:de:ad:be:ef 08:00 45 00 \
00 48 0a 9b 40 00 01 11 cb 87 c0 00 02 01 e0 00 \
01 81 01 40 01 40 00 34 a3 c8 08 02 00 2c 00 00 \
00 00 00 00 00 00 00 00 00 00 00 00 00 00 3e 37 \
63 ff fe cf 17 0e 00 01 00 00 02 00 00 00 66 83 \
c6 0f 1d 9a 61 87"
PTP_1588_IPV4_PDELAY_REQ=" \
01:00:5e:00:00:6b 00:00:de:ad:be:ef 08:00 45 00 \
00 52 35 a9 40 00 01 11 a1 85 c0 00 02 01 e0 00 \
00 6b 01 3f 01 3f 00 3e a2 bc 02 02 00 36 00 00 \
00 00 00 00 00 00 00 00 00 00 00 00 00 00 3e 37 \
63 ff fe cf 17 0e 00 01 00 01 05 7f 00 00 00 00 \
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00"
PTP_1588_IPV6_SYNC=" \
33:33:00:00:01:81 00:00:de:ad:be:ef 86:dd 60 06 \
7c 2f 00 36 11 01 20 01 0d b8 00 01 00 00 00 00 \
00 00 00 00 00 01 ff 0e 00 00 00 00 00 00 00 00 \
00 00 00 00 01 81 01 3f 01 3f 00 36 2e 92 00 02 \
00 2c 00 00 02 00 00 00 00 00 00 00 00 00 00 00 \
00 00 3e 37 63 ff fe cf 17 0e 00 01 00 00 00 00 \
00 00 00 00 00 00 00 00 00 00 00 00"
PTP_1588_IPV6_FOLLOW_UP=" \
33:33:00:00:01:81 00:00:de:ad:be:ef 86:dd 60 0a \
00 bc 00 36 11 01 20 01 0d b8 00 01 00 00 00 00 \
00 00 00 00 00 01 ff 0e 00 00 00 00 00 00 00 00 \
00 00 00 00 01 81 01 40 01 40 00 36 2e 92 08 02 \
00 2c 00 00 00 00 00 00 00 00 00 00 00 00 00 00 \
00 00 3e 37 63 ff fe cf 17 0e 00 01 00 00 02 00 \
00 00 66 83 c6 2a 32 09 bd 74 00 00"
PTP_1588_IPV6_PDELAY_REQ=" \
33:33:00:00:00:6b 00:00:de:ad:be:ef 86:dd 60 0c \
5c fd 00 40 11 01 fe 80 00 00 00 00 00 00 3c 37 \
63 ff fe cf 17 0e ff 02 00 00 00 00 00 00 00 00 \
00 00 00 00 00 6b 01 3f 01 3f 00 40 b4 54 02 02 \
00 36 00 00 00 00 00 00 00 00 00 00 00 00 00 00 \
00 00 3e 37 63 ff fe cf 17 0e 00 01 00 01 05 7f \
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 \
00 00 00 00 00 00"
# Disable promisc to ensure we don't receive unknown MAC DA packets
export TCPDUMP_EXTRA_FLAGS="-pl"
@ -49,13 +108,15 @@ export TCPDUMP_EXTRA_FLAGS="-pl"
h1=${NETIFS[p1]}
h2=${NETIFS[p2]}
send_non_ip()
send_raw()
{
local if_name=$1
local smac=$2
local dmac=$3
local if_name=$1; shift
local pkt="$1"; shift
local smac=$(mac_get $if_name)
$MZ -q $if_name "$dmac $smac $NON_IP_PKT"
pkt="${pkt/00:00:de:ad:be:ef/$smac}"
$MZ -q $if_name "$pkt"
}
send_uc_ipv4()
@ -109,6 +170,7 @@ run_test()
{
local send_if_name=$1; shift
local rcv_if_name=$1; shift
local skip_ptp=$1; shift
local no_unicast_flt=$1; shift
local test_name="$1"; shift
local smac=$(mac_get $send_if_name)
@ -150,6 +212,35 @@ run_test()
mc_route_destroy $rcv_if_name
mc_route_destroy $send_if_name
if [ $skip_ptp = false ]; then
ip maddress add 01:1b:19:00:00:00 dev $rcv_if_name
send_raw $send_if_name "$PTP_1588_L2_SYNC"
send_raw $send_if_name "$PTP_1588_L2_FOLLOW_UP"
ip maddress del 01:1b:19:00:00:00 dev $rcv_if_name
ip maddress add 01:80:c2:00:00:0e dev $rcv_if_name
send_raw $send_if_name "$PTP_1588_L2_PDELAY_REQ"
ip maddress del 01:80:c2:00:00:0e dev $rcv_if_name
mc_join $rcv_if_name 224.0.1.129
send_raw $send_if_name "$PTP_1588_IPV4_SYNC"
send_raw $send_if_name "$PTP_1588_IPV4_FOLLOW_UP"
mc_leave
mc_join $rcv_if_name 224.0.0.107
send_raw $send_if_name "$PTP_1588_IPV4_PDELAY_REQ"
mc_leave
mc_join $rcv_if_name ff0e::181
send_raw $send_if_name "$PTP_1588_IPV6_SYNC"
send_raw $send_if_name "$PTP_1588_IPV6_FOLLOW_UP"
mc_leave
mc_join $rcv_if_name ff02::6b
send_raw $send_if_name "$PTP_1588_IPV6_PDELAY_REQ"
mc_leave
fi
sleep 1
tcpdump_stop $rcv_if_name
@ -212,6 +303,44 @@ run_test()
"$smac > $UNKNOWN_MACV6_MC_ADDR3, ethertype IPv6 (0x86dd)" \
true "$test_name"
if [ $skip_ptp = false ]; then
check_rcv $rcv_if_name "1588v2 over L2 transport, Sync" \
"ethertype PTP (0x88f7).* PTPv2.* msg type : sync msg" \
true "$test_name"
check_rcv $rcv_if_name "1588v2 over L2 transport, Follow-Up" \
"ethertype PTP (0x88f7).* PTPv2.* msg type : follow up msg" \
true "$test_name"
check_rcv $rcv_if_name "1588v2 over L2 transport, Peer Delay Request" \
"ethertype PTP (0x88f7).* PTPv2.* msg type : peer delay req msg" \
true "$test_name"
check_rcv $rcv_if_name "1588v2 over IPv4, Sync" \
"ethertype IPv4 (0x0800).* PTPv2.* msg type : sync msg" \
true "$test_name"
check_rcv $rcv_if_name "1588v2 over IPv4, Follow-Up" \
"ethertype IPv4 (0x0800).* PTPv2.* msg type : follow up msg" \
true "$test_name"
check_rcv $rcv_if_name "1588v2 over IPv4, Peer Delay Request" \
"ethertype IPv4 (0x0800).* PTPv2.* msg type : peer delay req msg" \
true "$test_name"
check_rcv $rcv_if_name "1588v2 over IPv6, Sync" \
"ethertype IPv6 (0x86dd).* PTPv2.* msg type : sync msg" \
true "$test_name"
check_rcv $rcv_if_name "1588v2 over IPv6, Follow-Up" \
"ethertype IPv6 (0x86dd).* PTPv2.* msg type : follow up msg" \
true "$test_name"
check_rcv $rcv_if_name "1588v2 over IPv6, Peer Delay Request" \
"ethertype IPv6 (0x86dd).* PTPv2.* msg type : peer delay req msg" \
true "$test_name"
fi
tcpdump_cleanup $rcv_if_name
}
@ -293,6 +422,7 @@ macvlan_destroy()
standalone()
{
local no_unicast_flt=true
local skip_ptp=false
if [ $(has_unicast_flt $h2) = yes ]; then
no_unicast_flt=false
@ -302,7 +432,7 @@ standalone()
h2_create
macvlan_create $h2
run_test $h1 $h2 $no_unicast_flt "$h2"
run_test $h1 $h2 $skip_ptp $no_unicast_flt "$h2"
macvlan_destroy
h2_destroy
@ -313,13 +443,15 @@ test_bridge()
{
local no_unicast_flt=true
local vlan_filtering=$1
local skip_ptp=true
h1_create
bridge_create $vlan_filtering
simple_if_init br0 $H2_IPV4/24 $H2_IPV6/64
macvlan_create br0
run_test $h1 br0 $no_unicast_flt "vlan_filtering=$vlan_filtering bridge"
run_test $h1 br0 $skip_ptp $no_unicast_flt \
"vlan_filtering=$vlan_filtering bridge"
macvlan_destroy
simple_if_fini br0 $H2_IPV4/24 $H2_IPV6/64
@ -340,6 +472,7 @@ vlan_aware_bridge()
test_vlan()
{
local no_unicast_flt=true
local skip_ptp=false
if [ $(has_unicast_flt $h2) = yes ]; then
no_unicast_flt=false
@ -349,7 +482,7 @@ test_vlan()
h2_vlan_create
macvlan_create $h2.100
run_test $h1.100 $h2.100 $no_unicast_flt "VLAN upper"
run_test $h1.100 $h2.100 $skip_ptp $no_unicast_flt "VLAN upper"
macvlan_destroy
h2_vlan_destroy
@ -360,6 +493,7 @@ vlan_over_bridged_port()
{
local no_unicast_flt=true
local vlan_filtering=$1
local skip_ptp=false
# br_manage_promisc() will not force a single vlan_filtering port to
# promiscuous mode, so we should still expect unicast filtering to take
@ -373,7 +507,7 @@ vlan_over_bridged_port()
bridge_create $vlan_filtering
macvlan_create $h2.100
run_test $h1.100 $h2.100 $no_unicast_flt \
run_test $h1.100 $h2.100 $skip_ptp $no_unicast_flt \
"VLAN over vlan_filtering=$vlan_filtering bridged port"
macvlan_destroy
@ -396,6 +530,7 @@ vlan_over_bridge()
{
local no_unicast_flt=true
local vlan_filtering=$1
local skip_ptp=true
h1_vlan_create
bridge_create $vlan_filtering
@ -408,7 +543,7 @@ vlan_over_bridge()
bridge vlan add dev br0 vid 100 self
fi
run_test $h1.100 br0.100 $no_unicast_flt \
run_test $h1.100 br0.100 $skip_ptp $no_unicast_flt \
"VLAN over vlan_filtering=$vlan_filtering bridge"
if [ $vlan_filtering = 1 ]; then