korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-11-30 07:34:12 +08:00
Code Issues Packages Projects Releases Wiki Activity

ARM: dts: imx6qdl-kontron-samx6i: add Kontron SMARC SoM Support

Browse Source 
The patch adds the following interfaces according the SMARC Spec 1.1
[1] and provided schematics:
 - SMARC SPI0/1
   Note: Since Kontron still uses silicon revisions below 1.3 they have
         add a spi-nor to implement Workaround #1 of erratum ERR006282.
 - SMARC SDIO
 - SMARC LCD
 - SMARC HDMI
 - SMARC Management pins
   Note: Kontron don't route all of these pins to the i.MX6, some are
         routed to the SoM CPLD.
 - SMARC GPIO
 - SMARC CSI Camera
   Note: As specified in [1] the data lanes are shared to cover the
         csi and the parallel case. The case depends on the baseboard so
         muxing the data lanes is not part of this patch.
 - SMARC I2S
 - SMARC Watchdog
   Note: The watchdog output pin is routed to the CPLD and the SMARC
         header. The CPLD performs a reset after a 30s timeout so we
         need to enable the watchdog per default.
 - SMARC module eeprom

Due to the lack of hardware not all of these interfaces are tesetd.

[1] https://sget.org/standards/smarc

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This commit is contained in:
Michael Grzeschik 2019-06-17 18:14:32 +02:00 committed by Shawn Guo
parent 2a51f9dae1
commit 2125212785
3 changed files with 442 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

12
arch/arm/boot/dts/imx6dl-kontron-samx6i.dtsi Normal file
View File

@ -0,0 +1,12 @@
// SPDX-License-Identifier: GPL-2.0 OR X11
/*
* Copyright 2019 (C) Pengutronix, Marco Felsch <kernel@pengutronix.de>
*/
#include "imx6dl.dtsi"
#include "imx6qdl-kontron-samx6i.dtsi"
/ {
model = "Kontron SMARC sAMX6i Dual-Lite/Solo";
compatible = "kontron,imx6dl-samx6i", "fsl,imx6dl";
};

36
arch/arm/boot/dts/imx6q-kontron-samx6i.dtsi Normal file
View File

@ -0,0 +1,36 @@
// SPDX-License-Identifier: GPL-2.0 OR X11
/*
* Copyright 2019 (C) Pengutronix, Marco Felsch <kernel@pengutronix.de>
*/
#include "imx6q.dtsi"
#include "imx6qdl-kontron-samx6i.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
model = "Kontron SMARC sAMX6i Quad/Dual";
compatible = "kontron,imx6q-samx6i", "fsl,imx6q";
};
/* Quad/Dual SoMs have 3 chip-select signals */
&ecspi4 {
fsl,spi-num-chipselects = <3>;
cs-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>,
<&gpio3 29 GPIO_ACTIVE_HIGH>,
<&gpio3 25 GPIO_ACTIVE_HIGH>;
};
&pinctrl_ecspi4 {
fsl,pins = <
MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1
MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1
MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1
/* SPI4_IMX_CS2# - connected to internal flash */
MX6QDL_PAD_EIM_D24__GPIO3_IO24 0x1b0b0
/* SPI4_IMX_CS0# - connected to SMARC SPI0_CS0# */
MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b0
/* SPI4_CS3# - connected to SMARC SPI0_CS1# */
MX6QDL_PAD_EIM_D25__GPIO3_IO25 0x1b0b0
>;
};

394
arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi
View File

@ -8,6 +8,7 @@
*/
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/sound/fsl-imx-audmux.h>
/ {
reg_1p0v_s0: regulator-1p0v-s0 {
@ -70,6 +71,28 @@
vin-supply = <&reg_smarc_suppy>;
};
reg_smarc_lcdbklt: regulator-smarc-lcdbklt {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lcdbklt_en>;
regulator-name = "LCD_BKLT_EN";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
gpio = <&gpio1 16 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_smarc_lcdvdd: regulator-smarc-lcdvdd {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lcdvdd_en>;
regulator-name = "LCD_VDD_EN";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
gpio = <&gpio1 17 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_smarc_rtc: regulator-smarc-rtc {
compatible = "regulator-fixed";
regulator-name = "V_IN_RTC_BATT";
@ -89,6 +112,41 @@
regulator-boot-on;
};
lcd: lcd {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx-parallel-display";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lcd>;
status = "disabled";
port@0 {
reg = <0>;
lcd_in: endpoint {
};
};
port@1 {
reg = <1>;
lcd_out: endpoint {
};
};
};
lcd_backlight: lcd-backlight {
compatible = "pwm-backlight";
pwms = <&pwm4 0 5000000>;
pwm-names = "LCD_BKLT_PWM";
brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
default-brightness-level = <4>;
power-supply = <&reg_smarc_lcdbklt>;
status = "disabled";
};
i2c_intern: i2c-gpio-intern {
compatible = "i2c-gpio";
pinctrl-names = "default";
@ -99,6 +157,76 @@
#address-cells = <1>;
#size-cells = <0>;
};
i2c_lcd: i2c-gpio-lcd {
compatible = "i2c-gpio";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c_gpio_lcd>;
sda-gpios = <&gpio1 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
scl-gpios = <&gpio1 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
i2c-gpio,delay-us = <2>; /* ~100 kHz */
#address-cells = <1>;
#size-cells = <0>;
status = "disabld";
};
i2c_cam: i2c-gpio-cam {
compatible = "i2c-gpio";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c_gpio_cam>;
sda-gpios = <&gpio4 10 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
scl-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
i2c-gpio,delay-us = <2>; /* ~100 kHz */
#address-cells = <1>;
#size-cells = <0>;
status = "disabld";
};
};
/* I2S0, I2S1 */
&audmux {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_audmux>;
audmux_ssi1 {
fsl,audmux-port = <MX51_AUDMUX_PORT1_SSI0>;
fsl,port-config = <
(IMX_AUDMUX_V2_PTCR_TFSEL(MX51_AUDMUX_PORT3) |
IMX_AUDMUX_V2_PTCR_TCSEL(MX51_AUDMUX_PORT3) |
IMX_AUDMUX_V2_PTCR_SYN |
IMX_AUDMUX_V2_PTCR_TFSDIR |
IMX_AUDMUX_V2_PTCR_TCLKDIR)
IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT3)
>;
};
audmux_adu3 {
fsl,audmux-port = <MX51_AUDMUX_PORT3>;
fsl,port-config = <
IMX_AUDMUX_V2_PTCR_SYN
IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT1_SSI0)
>;
};
audmux_ssi2 {
fsl,audmux-port = <MX51_AUDMUX_PORT2_SSI1>;
fsl,port-config = <
(IMX_AUDMUX_V2_PTCR_TFSEL(MX51_AUDMUX_PORT4) |
IMX_AUDMUX_V2_PTCR_TCSEL(MX51_AUDMUX_PORT4) |
IMX_AUDMUX_V2_PTCR_SYN |
IMX_AUDMUX_V2_PTCR_TFSDIR |
IMX_AUDMUX_V2_PTCR_TCLKDIR)
IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT4)
>;
};
audmux_adu4 {
fsl,audmux-port = <MX51_AUDMUX_PORT4>;
fsl,port-config = <
IMX_AUDMUX_V2_PTCR_SYN
IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT2_SSI1)
>;
};
};
/* CAN0 */
@ -113,6 +241,30 @@
pinctrl-0 = <&pinctrl_flexcan2>;
};
/* SPI1 */
&ecspi2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi2>;
cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>,
<&gpio2 27 GPIO_ACTIVE_HIGH>;
};
/* SPI0 */
&ecspi4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi4>;
cs-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>,
<&gpio3 29 GPIO_ACTIVE_HIGH>;
status = "okay";
/* default boot source: workaround #1 for errata ERR006282 */
smarc_flash: spi-flash@0 {
compatible = "winbond,w25q16dw", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <20000000>;
};
};
/* GBE */
&fec {
pinctrl-names = "default";
@ -236,14 +388,79 @@
};
};
/* I2C_GP */
&i2c1 {
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
};
/* HDMI_CTRL */
&i2c2 {
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
};
/* I2C_PM */
&i2c3 {
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
status = "okay";
smarc_eeprom: eeprom@50 {
compatible = "atmel,24c32";
reg = <0x50>;
pagesize = <32>;
};
};
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mgmt_gpios &pinctrl_gpio>;
pinctrl_audmux: audmuxgrp {
fsl,pins = <
MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0
MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x130b0
MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0
MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0
MX6QDL_PAD_DISP0_DAT20__AUD4_TXC 0x130b0
MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x130b0
MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0
MX6QDL_PAD_DISP0_DAT23__AUD4_RXD 0x130b0
/* AUDIO MCLK */
MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x000b0
>;
};
pinctrl_ecspi2: ecspi2grp {
fsl,pins = <
MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1
MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1
MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1
MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x1b0b0 /* CS0 */
MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x1b0b0 /* CS1 */
>;
};
pinctrl_ecspi4: ecspi4grp {
fsl,pins = <
MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1
MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1
MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1
/* SPI_IMX_CS2# - connected to internal flash */
MX6QDL_PAD_EIM_D24__GPIO3_IO24 0x1b0b0
/* SPI_IMX_CS0# - connected to SMARC SPI0_CS0# */
MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b0
>;
};
pinctrl_flexcan1: flexcan1grp {
fsl,pins = <
MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x1b0b0
@ -258,6 +475,23 @@
>;
};
pinctrl_gpio: gpiogrp {
fsl,pins = <
MX6QDL_PAD_EIM_DA0__GPIO3_IO00 0x1b0b0 /* GPIO0 / CAM0_PWR# */
MX6QDL_PAD_EIM_DA1__GPIO3_IO01 0x1b0b0 /* GPIO1 / CAM1_PWR# */
MX6QDL_PAD_EIM_DA2__GPIO3_IO02 0x1b0b0 /* GPIO2 / CAM0_RST# */
MX6QDL_PAD_EIM_DA3__GPIO3_IO03 0x1b0b0 /* GPIO3 / CAM1_RST# */
MX6QDL_PAD_EIM_DA4__GPIO3_IO04 0x1b0b0 /* GPIO4 / HDA_RST# */
MX6QDL_PAD_EIM_DA5__GPIO3_IO05 0x1b0b0 /* GPIO5 / PWM_OUT */
MX6QDL_PAD_EIM_DA6__GPIO3_IO06 0x1b0b0 /* GPIO6 / TACHIN */
MX6QDL_PAD_EIM_DA7__GPIO3_IO07 0x1b0b0 /* GPIO7 / PCAM_FLD */
MX6QDL_PAD_EIM_DA8__GPIO3_IO08 0x1b0b0 /* GPIO8 / CAN0_ERR# */
MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x1b0b0 /* GPIO9 / CAN1_ERR# */
MX6QDL_PAD_EIM_DA10__GPIO3_IO10 0x1b0b0 /* GPIO10 */
MX6QDL_PAD_EIM_DA11__GPIO3_IO11 0x1b0b0 /* GPIO11 */
>;
};
pinctrl_enet: enetgrp {
fsl,pins = <
MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
@ -280,6 +514,13 @@
>;
};
pinctrl_i2c_gpio_cam: i2c-gpiocamgrp {
fsl,pins = <
MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x1b0b0 /* SCL */
MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 /* SDA */
>;
};
pinctrl_i2c_gpio_intern: i2c-gpiointerngrp {
fsl,pins = <
MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x1b0b0 /* SCL */
@ -287,6 +528,27 @@
>;
};
pinctrl_i2c_gpio_lcd: i2c-gpiolcdgrp {
fsl,pins = <
MX6QDL_PAD_SD1_DAT2__GPIO1_IO19 0x1b0b0 /* SCL */
MX6QDL_PAD_SD1_DAT3__GPIO1_IO21 0x1b0b0 /* SDA */
>;
};
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
>;
};
pinctrl_i2c2: i2c2grp {
fsl,pins = <
MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
>;
};
pinctrl_i2c3: i2c3grp {
fsl,pins = <
MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
@ -294,6 +556,72 @@
>;
};
pinctrl_lcd: lcdgrp {
fsl,pins = <
MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x100f1
MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x100f1
MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x100f1
MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x100f1
MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x100f1
MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x100f1
MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x100f1
MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x100f1
MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x100f1
MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x100f1
MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x100f1
MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x100f1
MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x100f1
MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x100f1
MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x100f1
MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x100f1
MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x100f1
MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x100f1
MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x100f1
MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x100f1
MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x100f1
MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x100f1
MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x100f1
MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x100f1
MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x100f1
MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x100f1 /* DE */
MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x100f1 /* HSYNC */
MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x100f1 /* VSYNC */
>;
};
pinctrl_lcdbklt_en: lcdbkltengrp {
fsl,pins = <
MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x1b0b1
>;
};
pinctrl_lcdvdd_en: lcdvddengrp {
fsl,pins = <
MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x1b0b0
>;
};
pinctrl_mipi_csi: mipi-csigrp {
fsl,pins = <
MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1 0x000b0 /* CSI0/1 MCLK */
>;
};
pinctrl_mgmt_gpios: mgmt-gpiosgrp {
fsl,pins = <
MX6QDL_PAD_EIM_WAIT__GPIO5_IO00 0x1b0b0 /* LID# */
MX6QDL_PAD_SD3_DAT7__GPIO6_IO17 0x1b0b0 /* SLEEP# */
MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 /* CHARGING# */
MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 /* CHARGER_PRSNT# */
MX6QDL_PAD_SD1_CLK__GPIO1_IO20 0x1b0b0 /* CARRIER_STBY# */
MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x1b0b0 /* BATLOW# */
MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x1b0b0 /* TEST# */
MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 /* VDD_IO_SEL_D# */
MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x1b0b0 /* POWER_BTN# */
>;
};
pinctrl_pcie: pciegrp {
fsl,pins = <
MX6QDL_PAD_EIM_D18__GPIO3_IO18 0x1b0b0 /* PCI_A_PRSNT# */
@ -302,6 +630,12 @@
>;
};
pinctrl_pwm4: pwm4grp {
fsl,pins = <
MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
@ -343,6 +677,21 @@
>;
};
pinctrl_usdhc3: usdhc3grp {
fsl,pins = <
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x17059
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x1b0b0 /* CD */
MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b0 /* WP */
MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* PWR_EN */
>;
};
pinctrl_usdhc4: usdhc4grp {
fsl,pins = <
MX6QDL_PAD_SD4_CLK__SD4_CLK 0x17059
@ -357,6 +706,17 @@
MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059
>;
};
pinctrl_wdog1: wdog1rp {
fsl,pins = <
MX6QDL_PAD_GPIO_9__WDOG1_B 0x1b0b0
>;
};
};
&mipi_csi {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mipi_csi>;
};
&pcie {
@ -366,6 +726,24 @@
reset-gpio = <&gpio3 13 GPIO_ACTIVE_HIGH>;
};
/* LCD_BKLT_PWM */
&pwm4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm4>;
};
&reg_arm {
vin-supply = <&reg_v_core_s0>;
};
&reg_pu {
vin-supply = <&reg_vddsoc_s0>;
};
&reg_soc {
vin-supply = <&reg_vddsoc_s0>;
};
/* SER0 */
&uart1 {
pinctrl-names = "default";
@ -407,6 +785,15 @@
vbus-supply = <&reg_5p0v_s0>;
};
/* SDIO */
&usdhc3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc3>;
cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
no-1-8-v;
};
/* SDMMC */
&usdhc4 {
/* Internal eMMC, optional on some boards */
@ -419,3 +806,10 @@
vmmc-supply = <&reg_3p3v_s0>;
vqmmc-supply = <&reg_1p8v_s0>;
};
&wdog1 {
/* CPLD is feeded by watchdog (hardwired) */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_wdog1>;
status = "okay";
};