spi: spi-qcom-qspi: Avoid clock setting if not needed

As per recent changes to the spi-qcom-qspi, now when we set the clock
we'll call into the interconnect framework and also call the OPP API.
Those are expensive operations.  Let's avoid calling them if possible.
This has a big impact on getting transfer rates back up to where they
were (or maybe slightly better) before those patches landed.

Fixes: cff80645d6 ("spi: spi-qcom-qspi: Add interconnect support")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Rajendra Nayak <rnayak@codeaurora.org>
Tested-by: Rajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: Mukesh Kumar Savaliya <msavaliy@codeaurora.org>
Reviewed-by: Akash Asthana <akashast@codeaurora.org>
Link: https://lore.kernel.org/r/20200709075113.v2.1.Ia7cb4f41ce93d37d0a764b47c8a453ce9e9c70ef@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This commit is contained in:
Douglas Anderson 2020-07-09 07:51:44 -07:00 committed by Bjorn Andersson
parent f79a158d37
commit 2124331411

View File

@ -144,6 +144,7 @@ struct qcom_qspi {
struct icc_path *icc_path_cpu_to_qspi;
struct opp_table *opp_table;
bool has_opp_table;
unsigned long last_speed;
/* Lock to protect data accessed by IRQs */
spinlock_t lock;
};
@ -226,19 +227,13 @@ static void qcom_qspi_handle_err(struct spi_master *master,
spin_unlock_irqrestore(&ctrl->lock, flags);
}
static int qcom_qspi_transfer_one(struct spi_master *master,
struct spi_device *slv,
struct spi_transfer *xfer)
static int qcom_qspi_set_speed(struct qcom_qspi *ctrl, unsigned long speed_hz)
{
struct qcom_qspi *ctrl = spi_master_get_devdata(master);
int ret;
unsigned long speed_hz;
unsigned long flags;
unsigned int avg_bw_cpu;
speed_hz = slv->max_speed_hz;
if (xfer->speed_hz)
speed_hz = xfer->speed_hz;
if (speed_hz == ctrl->last_speed)
return 0;
/* In regular operation (SBL_EN=1) core must be 4x transfer clock */
ret = dev_pm_opp_set_rate(ctrl->dev, speed_hz * 4);
@ -259,6 +254,28 @@ static int qcom_qspi_transfer_one(struct spi_master *master,
return ret;
}
ctrl->last_speed = speed_hz;
return 0;
}
static int qcom_qspi_transfer_one(struct spi_master *master,
struct spi_device *slv,
struct spi_transfer *xfer)
{
struct qcom_qspi *ctrl = spi_master_get_devdata(master);
int ret;
unsigned long speed_hz;
unsigned long flags;
speed_hz = slv->max_speed_hz;
if (xfer->speed_hz)
speed_hz = xfer->speed_hz;
ret = qcom_qspi_set_speed(ctrl, speed_hz);
if (ret)
return ret;
spin_lock_irqsave(&ctrl->lock, flags);
/* We are half duplex, so either rx or tx will be set */
@ -602,7 +619,11 @@ static int __maybe_unused qcom_qspi_runtime_resume(struct device *dev)
return ret;
}
return clk_bulk_prepare_enable(QSPI_NUM_CLKS, ctrl->clks);
ret = clk_bulk_prepare_enable(QSPI_NUM_CLKS, ctrl->clks);
if (ret)
return ret;
return dev_pm_opp_set_rate(dev, ctrl->last_speed * 4);
}
static int __maybe_unused qcom_qspi_suspend(struct device *dev)