ALSA: mpu401_uart: Use standard print API

Use the standard print API with dev_*() instead of the old house-baked
one.  It gives better information and allows dynamically control of
debug prints.

The assignment of mpu->rmidi was moved to an earlier place, so that
dev_*() can access to the proper device pointer.

Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-5-tiwai@suse.de
This commit is contained in:
Takashi Iwai 2024-08-07 15:33:54 +02:00
parent 2bddeda8ac
commit 1fa884ebeb

View File

@ -73,8 +73,9 @@ static void snd_mpu401_uart_clear_rx(struct snd_mpu401 *mpu)
mpu->read(mpu, MPU401D(mpu));
#ifdef CONFIG_SND_DEBUG
if (timeout <= 0)
snd_printk(KERN_ERR "cmd: clear rx timeout (status = 0x%x)\n",
mpu->read(mpu, MPU401C(mpu)));
dev_err(mpu->rmidi->dev,
"cmd: clear rx timeout (status = 0x%x)\n",
mpu->read(mpu, MPU401C(mpu)));
#endif
}
@ -224,8 +225,9 @@ static int snd_mpu401_uart_cmd(struct snd_mpu401 * mpu, unsigned char cmd,
udelay(10);
#ifdef CONFIG_SND_DEBUG
if (!timeout)
snd_printk(KERN_ERR "cmd: tx timeout (status = 0x%x)\n",
mpu->read(mpu, MPU401C(mpu)));
dev_err(mpu->rmidi->dev,
"cmd: tx timeout (status = 0x%x)\n",
mpu->read(mpu, MPU401C(mpu)));
#endif
}
mpu->write(mpu, cmd, MPU401C(mpu));
@ -244,10 +246,11 @@ static int snd_mpu401_uart_cmd(struct snd_mpu401 * mpu, unsigned char cmd,
ok = 1;
spin_unlock_irqrestore(&mpu->input_lock, flags);
if (!ok) {
snd_printk(KERN_ERR "cmd: 0x%x failed at 0x%lx "
"(status = 0x%x, data = 0x%x)\n", cmd, mpu->port,
mpu->read(mpu, MPU401C(mpu)),
mpu->read(mpu, MPU401D(mpu)));
dev_err(mpu->rmidi->dev,
"cmd: 0x%x failed at 0x%lx (status = 0x%x, data = 0x%x)\n",
cmd, mpu->port,
mpu->read(mpu, MPU401C(mpu)),
mpu->read(mpu, MPU401D(mpu)));
return 1;
}
return 0;
@ -546,13 +549,14 @@ int snd_mpu401_uart_new(struct snd_card *card, int device,
spin_lock_init(&mpu->timer_lock);
mpu->hardware = hardware;
mpu->irq = -1;
mpu->rmidi = rmidi;
if (! (info_flags & MPU401_INFO_INTEGRATED)) {
int res_size = hardware == MPU401_HW_PC98II ? 4 : 2;
mpu->res = request_region(port, res_size, "MPU401 UART");
if (!mpu->res) {
snd_printk(KERN_ERR "mpu401_uart: "
"unable to grab port 0x%lx size %d\n",
port, res_size);
dev_err(rmidi->dev,
"mpu401_uart: unable to grab port 0x%lx size %d\n",
port, res_size);
err = -EBUSY;
goto free_device;
}
@ -572,8 +576,8 @@ int snd_mpu401_uart_new(struct snd_card *card, int device,
if (irq >= 0) {
if (request_irq(irq, snd_mpu401_uart_interrupt, 0,
"MPU401 UART", (void *) mpu)) {
snd_printk(KERN_ERR "mpu401_uart: "
"unable to grab IRQ %d\n", irq);
dev_err(rmidi->dev,
"mpu401_uart: unable to grab IRQ %d\n", irq);
err = -EBUSY;
goto free_device;
}
@ -599,7 +603,6 @@ int snd_mpu401_uart_new(struct snd_card *card, int device,
if (out_enable)
rmidi->info_flags |= SNDRV_RAWMIDI_INFO_DUPLEX;
}
mpu->rmidi = rmidi;
if (rrawmidi)
*rrawmidi = rmidi;
return 0;