mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-19 10:14:23 +08:00
ARM: SAMSUNG: Move GPIO common functions to plat-samsung
This patch moves GPIO common functions (from plat-s3c64xx) into plat-samsung. and adds the config option to build the plat-samsung/gpiolib for Samsung SoCs. Signed-off-by: Adityapratap Sharma <aditya.ps@samsung.com> Signed-off-by: Atul Dahiya <atul.dahiya@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
This commit is contained in:
Kukjin Kim
Ben Dooks
parent
9717453c40
commit
1f323cfda5
@ -11,6 +11,11 @@
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#define GPIOCON_OFF (0x00)
|
||||
#define GPIODAT_OFF (0x04)
|
||||
|
||||
#define con_4bit_shift(__off) ((__off) * 4)
|
||||
|
||||
/* Define the core gpiolib support functions that the s3c platforms may
|
||||
* need to extend or change depending on the hardware and the s3c chip
|
||||
* selected at build or found at run time.
|
||||
@ -80,6 +85,29 @@ extern void s3c_gpiolib_add(struct s3c_gpio_chip *chip);
|
||||
* and any other necessary functions.
|
||||
*/
|
||||
|
||||
/**
|
||||
* samsung_gpiolib_add_4bit_chips - 4bit single register GPIO config.
|
||||
* @chip: The gpio chip that is being configured.
|
||||
* @nr_chips: The no of chips (gpio ports) for the GPIO being configured.
|
||||
*
|
||||
* This helper deal with the GPIO cases where the control register has 4 bits
|
||||
* of control per GPIO, generally in the form of:
|
||||
* 0000 = Input
|
||||
* 0001 = Output
|
||||
* others = Special functions (dependant on bank)
|
||||
*
|
||||
* Note, since the code to deal with the case where there are two control
|
||||
* registers instead of one, we do not have a seperate set of function
|
||||
* (samsung_gpiolib_add_4bit2_chips)for each case.
|
||||
*/
|
||||
extern void samsung_gpiolib_add_4bit_chips(struct s3c_gpio_chip *chip,
|
||||
int nr_chips);
|
||||
extern void samsung_gpiolib_add_4bit2_chips(struct s3c_gpio_chip *chip,
|
||||
int nr_chips);
|
||||
|
||||
extern void samsung_gpiolib_add_4bit(struct s3c_gpio_chip *chip);
|
||||
extern void samsung_gpiolib_add_4bit2(struct s3c_gpio_chip *chip);
|
||||
|
||||
#ifdef CONFIG_S3C_GPIO_TRACK
|
||||
extern struct s3c_gpio_chip *s3c_gpios[S3C_GPIO_END];
|
||||
|
||||
|
||||
@ -22,6 +22,7 @@ config PLAT_S3C64XX
|
||||
select S3C_GPIO_CFG_S3C64XX
|
||||
select S3C_DEV_NAND
|
||||
select USB_ARCH_HAS_OHCI
|
||||
select SAMSUNG_GPIOLIB_4BIT
|
||||
help
|
||||
Base platform code for any Samsung S3C64XX device
|
||||
|
||||
|
||||
@ -49,150 +49,6 @@
|
||||
* [2] BANK has two control registers, GPxCON0 and GPxCON1
|
||||
*/
|
||||
|
||||
#define OFF_GPCON (0x00)
|
||||
#define OFF_GPDAT (0x04)
|
||||
|
||||
#define con_4bit_shift(__off) ((__off) * 4)
|
||||
|
||||
#if 1
|
||||
#define gpio_dbg(x...) do { } while(0)
|
||||
#else
|
||||
#define gpio_dbg(x...) printk(KERN_DEBUG x)
|
||||
#endif
|
||||
|
||||
/* The s3c64xx_gpiolib_4bit routines are to control the gpio banks where
|
||||
* the gpio configuration register (GPxCON) has 4 bits per GPIO, as the
|
||||
* following example:
|
||||
*
|
||||
* base + 0x00: Control register, 4 bits per gpio
|
||||
* gpio n: 4 bits starting at (4*n)
|
||||
* 0000 = input, 0001 = output, others mean special-function
|
||||
* base + 0x04: Data register, 1 bit per gpio
|
||||
* bit n: data bit n
|
||||
*
|
||||
* Note, since the data register is one bit per gpio and is at base + 0x4
|
||||
* we can use s3c_gpiolib_get and s3c_gpiolib_set to change the state of
|
||||
* the output.
|
||||
*/
|
||||
|
||||
static int s3c64xx_gpiolib_4bit_input(struct gpio_chip *chip, unsigned offset)
|
||||
{
|
||||
struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
|
||||
void __iomem *base = ourchip->base;
|
||||
unsigned long con;
|
||||
|
||||
con = __raw_readl(base + OFF_GPCON);
|
||||
con &= ~(0xf << con_4bit_shift(offset));
|
||||
__raw_writel(con, base + OFF_GPCON);
|
||||
|
||||
gpio_dbg("%s: %p: CON now %08lx\n", __func__, base, con);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int s3c64xx_gpiolib_4bit_output(struct gpio_chip *chip,
|
||||
unsigned offset, int value)
|
||||
{
|
||||
struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
|
||||
void __iomem *base = ourchip->base;
|
||||
unsigned long con;
|
||||
unsigned long dat;
|
||||
|
||||
con = __raw_readl(base + OFF_GPCON);
|
||||
con &= ~(0xf << con_4bit_shift(offset));
|
||||
con |= 0x1 << con_4bit_shift(offset);
|
||||
|
||||
dat = __raw_readl(base + OFF_GPDAT);
|
||||
if (value)
|
||||
dat |= 1 << offset;
|
||||
else
|
||||
dat &= ~(1 << offset);
|
||||
|
||||
__raw_writel(dat, base + OFF_GPDAT);
|
||||
__raw_writel(con, base + OFF_GPCON);
|
||||
__raw_writel(dat, base + OFF_GPDAT);
|
||||
|
||||
gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/* The next set of routines are for the case where the GPIO configuration
|
||||
* registers are 4 bits per GPIO but there is more than one register (the
|
||||
* bank has more than 8 GPIOs.
|
||||
*
|
||||
* This case is the similar to the 4 bit case, but the registers are as
|
||||
* follows:
|
||||
*
|
||||
* base + 0x00: Control register, 4 bits per gpio (lower 8 GPIOs)
|
||||
* gpio n: 4 bits starting at (4*n)
|
||||
* 0000 = input, 0001 = output, others mean special-function
|
||||
* base + 0x04: Control register, 4 bits per gpio (up to 8 additions GPIOs)
|
||||
* gpio n: 4 bits starting at (4*n)
|
||||
* 0000 = input, 0001 = output, others mean special-function
|
||||
* base + 0x08: Data register, 1 bit per gpio
|
||||
* bit n: data bit n
|
||||
*
|
||||
* To allow us to use the s3c_gpiolib_get and s3c_gpiolib_set routines we
|
||||
* store the 'base + 0x4' address so that these routines see the data
|
||||
* register at ourchip->base + 0x04.
|
||||
*/
|
||||
|
||||
static int s3c64xx_gpiolib_4bit2_input(struct gpio_chip *chip, unsigned offset)
|
||||
{
|
||||
struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
|
||||
void __iomem *base = ourchip->base;
|
||||
void __iomem *regcon = base;
|
||||
unsigned long con;
|
||||
|
||||
if (offset > 7)
|
||||
offset -= 8;
|
||||
else
|
||||
regcon -= 4;
|
||||
|
||||
con = __raw_readl(regcon);
|
||||
con &= ~(0xf << con_4bit_shift(offset));
|
||||
__raw_writel(con, regcon);
|
||||
|
||||
gpio_dbg("%s: %p: CON %08lx\n", __func__, base, con);
|
||||
|
||||
return 0;
|
||||
|
||||
}
|
||||
|
||||
static int s3c64xx_gpiolib_4bit2_output(struct gpio_chip *chip,
|
||||
unsigned offset, int value)
|
||||
{
|
||||
struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
|
||||
void __iomem *base = ourchip->base;
|
||||
void __iomem *regcon = base;
|
||||
unsigned long con;
|
||||
unsigned long dat;
|
||||
|
||||
if (offset > 7)
|
||||
offset -= 8;
|
||||
else
|
||||
regcon -= 4;
|
||||
|
||||
con = __raw_readl(regcon);
|
||||
con &= ~(0xf << con_4bit_shift(offset));
|
||||
con |= 0x1 << con_4bit_shift(offset);
|
||||
|
||||
dat = __raw_readl(base + OFF_GPDAT);
|
||||
if (value)
|
||||
dat |= 1 << offset;
|
||||
else
|
||||
dat &= ~(1 << offset);
|
||||
|
||||
__raw_writel(dat, base + OFF_GPDAT);
|
||||
__raw_writel(con, regcon);
|
||||
__raw_writel(dat, base + OFF_GPDAT);
|
||||
|
||||
gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct s3c_gpio_cfg gpio_4bit_cfg_noint = {
|
||||
.set_config = s3c_gpio_setcfg_s3c64xx_4bit,
|
||||
.set_pull = s3c_gpio_setpull_updown,
|
||||
@ -399,20 +255,6 @@ static struct s3c_gpio_chip gpio_2bit[] = {
|
||||
},
|
||||
};
|
||||
|
||||
static __init void s3c64xx_gpiolib_add_4bit(struct s3c_gpio_chip *chip)
|
||||
{
|
||||
chip->chip.direction_input = s3c64xx_gpiolib_4bit_input;
|
||||
chip->chip.direction_output = s3c64xx_gpiolib_4bit_output;
|
||||
chip->pm = __gpio_pm(&s3c_gpio_pm_4bit);
|
||||
}
|
||||
|
||||
static __init void s3c64xx_gpiolib_add_4bit2(struct s3c_gpio_chip *chip)
|
||||
{
|
||||
chip->chip.direction_input = s3c64xx_gpiolib_4bit2_input;
|
||||
chip->chip.direction_output = s3c64xx_gpiolib_4bit2_output;
|
||||
chip->pm = __gpio_pm(&s3c_gpio_pm_4bit);
|
||||
}
|
||||
|
||||
static __init void s3c64xx_gpiolib_add_2bit(struct s3c_gpio_chip *chip)
|
||||
{
|
||||
chip->pm = __gpio_pm(&s3c_gpio_pm_2bit);
|
||||
@ -432,10 +274,10 @@ static __init void s3c64xx_gpiolib_add(struct s3c_gpio_chip *chips,
|
||||
static __init int s3c64xx_gpiolib_init(void)
|
||||
{
|
||||
s3c64xx_gpiolib_add(gpio_4bit, ARRAY_SIZE(gpio_4bit),
|
||||
s3c64xx_gpiolib_add_4bit);
|
||||
samsung_gpiolib_add_4bit);
|
||||
|
||||
s3c64xx_gpiolib_add(gpio_4bit2, ARRAY_SIZE(gpio_4bit2),
|
||||
s3c64xx_gpiolib_add_4bit2);
|
||||
samsung_gpiolib_add_4bit2);
|
||||
|
||||
s3c64xx_gpiolib_add(gpio_2bit, ARRAY_SIZE(gpio_2bit),
|
||||
s3c64xx_gpiolib_add_2bit);
|
||||
|
||||
@ -33,6 +33,13 @@ config SAMSUNG_IRQ_UART
|
||||
|
||||
# options for gpio configuration support
|
||||
|
||||
config SAMSUNG_GPIOLIB_4BIT
|
||||
bool
|
||||
help
|
||||
GPIOlib file contains the 4 bit modification functions for gpio
|
||||
configuration. GPIOlib shall be compiled only for S3C64XX and S5P
|
||||
series of processors.
|
||||
|
||||
config S3C_GPIO_CFG_S3C24XX
|
||||
bool
|
||||
help
|
||||
|
||||
@ -15,6 +15,7 @@ obj-y += clock.o
|
||||
obj-y += pwm-clock.o
|
||||
obj-y += gpio-config.o
|
||||
|
||||
obj-$(CONFIG_SAMSUNG_GPIOLIB_4BIT) += gpiolib.o
|
||||
obj-$(CONFIG_SAMSUNG_CLKSRC) += clock-clksrc.o
|
||||
|
||||
obj-$(CONFIG_SAMSUNG_IRQ_UART) += irq-uart.o
|
||||
|
||||
197
arch/arm/plat-samsung/gpiolib.c
Normal file
197
arch/arm/plat-samsung/gpiolib.c
Normal file
@ -0,0 +1,197 @@
|
||||
/* arch/arm/plat-samsung/gpiolib.c
|
||||
*
|
||||
* Copyright 2008 Openmoko, Inc.
|
||||
* Copyright 2008 Simtec Electronics
|
||||
* Ben Dooks <ben@simtec.co.uk>
|
||||
* http://armlinux.simtec.co.uk/
|
||||
*
|
||||
* Copyright (c) 2009 Samsung Electronics Co., Ltd.
|
||||
* http://www.samsung.com/
|
||||
*
|
||||
* SAMSUNG - GPIOlib support
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/irq.h>
|
||||
#include <linux/io.h>
|
||||
#include <mach/gpio.h>
|
||||
#include <plat/gpio-core.h>
|
||||
#include <plat/gpio-cfg.h>
|
||||
#include <plat/gpio-cfg-helpers.h>
|
||||
|
||||
#ifndef DEBUG_GPIO
|
||||
#define gpio_dbg(x...) do { } while (0)
|
||||
#else
|
||||
#define gpio_dbg(x...) printk(KERN_DEBUG x)
|
||||
#endif
|
||||
|
||||
/* The samsung_gpiolib_4bit routines are to control the gpio banks where
|
||||
* the gpio configuration register (GPxCON) has 4 bits per GPIO, as the
|
||||
* following example:
|
||||
*
|
||||
* base + 0x00: Control register, 4 bits per gpio
|
||||
* gpio n: 4 bits starting at (4*n)
|
||||
* 0000 = input, 0001 = output, others mean special-function
|
||||
* base + 0x04: Data register, 1 bit per gpio
|
||||
* bit n: data bit n
|
||||
*
|
||||
* Note, since the data register is one bit per gpio and is at base + 0x4
|
||||
* we can use s3c_gpiolib_get and s3c_gpiolib_set to change the state of
|
||||
* the output.
|
||||
*/
|
||||
|
||||
int samsung_gpiolib_4bit_input(struct gpio_chip *chip, unsigned int offset)
|
||||
{
|
||||
struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
|
||||
void __iomem *base = ourchip->base;
|
||||
unsigned long con;
|
||||
|
||||
con = __raw_readl(base + GPIOCON_OFF);
|
||||
con &= ~(0xf << con_4bit_shift(offset));
|
||||
__raw_writel(con, base + GPIOCON_OFF);
|
||||
|
||||
gpio_dbg("%s: %p: CON now %08lx\n", __func__, base, con);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
int samsung_gpiolib_4bit_output(struct gpio_chip *chip,
|
||||
unsigned int offset, int value)
|
||||
{
|
||||
struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
|
||||
void __iomem *base = ourchip->base;
|
||||
unsigned long con;
|
||||
unsigned long dat;
|
||||
|
||||
con = __raw_readl(base + GPIOCON_OFF);
|
||||
con &= ~(0xf << con_4bit_shift(offset));
|
||||
con |= 0x1 << con_4bit_shift(offset);
|
||||
|
||||
dat = __raw_readl(base + GPIODAT_OFF);
|
||||
|
||||
if (value)
|
||||
dat |= 1 << offset;
|
||||
else
|
||||
dat &= ~(1 << offset);
|
||||
|
||||
__raw_writel(dat, base + GPIODAT_OFF);
|
||||
__raw_writel(con, base + GPIOCON_OFF);
|
||||
__raw_writel(dat, base + GPIODAT_OFF);
|
||||
|
||||
gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/* The next set of routines are for the case where the GPIO configuration
|
||||
* registers are 4 bits per GPIO but there is more than one register (the
|
||||
* bank has more than 8 GPIOs.
|
||||
*
|
||||
* This case is the similar to the 4 bit case, but the registers are as
|
||||
* follows:
|
||||
*
|
||||
* base + 0x00: Control register, 4 bits per gpio (lower 8 GPIOs)
|
||||
* gpio n: 4 bits starting at (4*n)
|
||||
* 0000 = input, 0001 = output, others mean special-function
|
||||
* base + 0x04: Control register, 4 bits per gpio (up to 8 additions GPIOs)
|
||||
* gpio n: 4 bits starting at (4*n)
|
||||
* 0000 = input, 0001 = output, others mean special-function
|
||||
* base + 0x08: Data register, 1 bit per gpio
|
||||
* bit n: data bit n
|
||||
*
|
||||
* To allow us to use the s3c_gpiolib_get and s3c_gpiolib_set routines we
|
||||
* store the 'base + 0x4' address so that these routines see the data
|
||||
* register at ourchip->base + 0x04.
|
||||
*/
|
||||
|
||||
int samsung_gpiolib_4bit2_input(struct gpio_chip *chip, unsigned int offset)
|
||||
{
|
||||
struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
|
||||
void __iomem *base = ourchip->base;
|
||||
void __iomem *regcon = base;
|
||||
unsigned long con;
|
||||
|
||||
if (offset > 7)
|
||||
offset -= 8;
|
||||
else
|
||||
regcon -= 4;
|
||||
|
||||
con = __raw_readl(regcon);
|
||||
con &= ~(0xf << con_4bit_shift(offset));
|
||||
__raw_writel(con, regcon);
|
||||
|
||||
gpio_dbg("%s: %p: CON %08lx\n", __func__, base, con);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
int samsung_gpiolib_4bit2_output(struct gpio_chip *chip,
|
||||
unsigned int offset, int value)
|
||||
{
|
||||
struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
|
||||
void __iomem *base = ourchip->base;
|
||||
void __iomem *regcon = base;
|
||||
unsigned long con;
|
||||
unsigned long dat;
|
||||
unsigned con_offset = offset;
|
||||
|
||||
if (con_offset > 7)
|
||||
con_offset -= 8;
|
||||
else
|
||||
regcon -= 4;
|
||||
|
||||
con = __raw_readl(regcon);
|
||||
con &= ~(0xf << con_4bit_shift(con_offset));
|
||||
con |= 0x1 << con_4bit_shift(con_offset);
|
||||
|
||||
dat = __raw_readl(base + GPIODAT_OFF);
|
||||
|
||||
if (value)
|
||||
dat |= 1 << offset;
|
||||
else
|
||||
dat &= ~(1 << offset);
|
||||
|
||||
__raw_writel(dat, base + GPIODAT_OFF);
|
||||
__raw_writel(con, regcon);
|
||||
__raw_writel(dat, base + GPIODAT_OFF);
|
||||
|
||||
gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
void __init samsung_gpiolib_add_4bit(struct s3c_gpio_chip *chip)
|
||||
{
|
||||
chip->chip.direction_input = samsung_gpiolib_4bit_input;
|
||||
chip->chip.direction_output = samsung_gpiolib_4bit_output;
|
||||
chip->pm = __gpio_pm(&s3c_gpio_pm_4bit);
|
||||
}
|
||||
|
||||
void __init samsung_gpiolib_add_4bit2(struct s3c_gpio_chip *chip)
|
||||
{
|
||||
chip->chip.direction_input = samsung_gpiolib_4bit2_input;
|
||||
chip->chip.direction_output = samsung_gpiolib_4bit2_output;
|
||||
chip->pm = __gpio_pm(&s3c_gpio_pm_4bit);
|
||||
}
|
||||
|
||||
void __init samsung_gpiolib_add_4bit_chips(struct s3c_gpio_chip *chip,
|
||||
int nr_chips)
|
||||
{
|
||||
for (; nr_chips > 0; nr_chips--, chip++) {
|
||||
samsung_gpiolib_add_4bit(chip);
|
||||
s3c_gpiolib_add(chip);
|
||||
}
|
||||
}
|
||||
|
||||
void __init samsung_gpiolib_add_4bit2_chips(struct s3c_gpio_chip *chip,
|
||||
int nr_chips)
|
||||
{
|
||||
for (; nr_chips > 0; nr_chips--, chip++) {
|
||||
samsung_gpiolib_add_4bit2(chip);
|
||||
s3c_gpiolib_add(chip);
|
||||
}
|
||||
}
|
||||
Loading…
Reference in New Issue
Block a user