mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-25 05:04:09 +08:00
Merge branch 'for-6.6/elan' into for-linus
Make use of panel follower for the Ilitek ili9882t driver by Cong Yang
This commit is contained in:
commit
1e5d726003
67
Documentation/devicetree/bindings/input/ilitek,ili9882t.yaml
Normal file
67
Documentation/devicetree/bindings/input/ilitek,ili9882t.yaml
Normal file
@ -0,0 +1,67 @@
|
||||
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/input/ilitek,ili9882t.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Ilitek ili9882t touchscreen controller
|
||||
|
||||
maintainers:
|
||||
- Cong Yang <yangcong5@huaqin.corp-partner.google.com>
|
||||
|
||||
description:
|
||||
Supports the Ilitek ili9882t touchscreen controller.
|
||||
This touchscreen controller uses the i2c-hid protocol with a reset GPIO.
|
||||
|
||||
allOf:
|
||||
- $ref: /schemas/input/touchscreen/touchscreen.yaml#
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
const: ilitek,ili9882t
|
||||
|
||||
reg:
|
||||
const: 0x41
|
||||
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
panel: true
|
||||
|
||||
reset-gpios:
|
||||
maxItems: 1
|
||||
description: Reset GPIO.
|
||||
|
||||
vccio-supply:
|
||||
description: The 1.8V supply to the touchscreen.
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- interrupts
|
||||
- panel
|
||||
- vccio-supply
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
|
||||
i2c {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
touchscreen: touchscreen@41 {
|
||||
compatible = "ilitek,ili9882t";
|
||||
reg = <0x41>;
|
||||
|
||||
interrupt-parent = <&pio>;
|
||||
interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
|
||||
|
||||
panel = <&panel>;
|
||||
reset-gpios = <&pio 60 GPIO_ACTIVE_LOW>;
|
||||
vccio-supply = <&mt6366_vio18_reg>;
|
||||
};
|
||||
};
|
@ -18,9 +18,11 @@
|
||||
#include "i2c-hid.h"
|
||||
|
||||
struct elan_i2c_hid_chip_data {
|
||||
unsigned int post_gpio_reset_delay_ms;
|
||||
unsigned int post_gpio_reset_on_delay_ms;
|
||||
unsigned int post_gpio_reset_off_delay_ms;
|
||||
unsigned int post_power_delay_ms;
|
||||
u16 hid_descriptor_address;
|
||||
const char *main_supply_name;
|
||||
};
|
||||
|
||||
struct i2c_hid_of_elan {
|
||||
@ -38,9 +40,11 @@ static int elan_i2c_hid_power_up(struct i2chid_ops *ops)
|
||||
container_of(ops, struct i2c_hid_of_elan, ops);
|
||||
int ret;
|
||||
|
||||
ret = regulator_enable(ihid_elan->vcc33);
|
||||
if (ret)
|
||||
return ret;
|
||||
if (ihid_elan->vcc33) {
|
||||
ret = regulator_enable(ihid_elan->vcc33);
|
||||
if (ret)
|
||||
return ret;
|
||||
}
|
||||
|
||||
ret = regulator_enable(ihid_elan->vccio);
|
||||
if (ret) {
|
||||
@ -52,8 +56,8 @@ static int elan_i2c_hid_power_up(struct i2chid_ops *ops)
|
||||
msleep(ihid_elan->chip_data->post_power_delay_ms);
|
||||
|
||||
gpiod_set_value_cansleep(ihid_elan->reset_gpio, 0);
|
||||
if (ihid_elan->chip_data->post_gpio_reset_delay_ms)
|
||||
msleep(ihid_elan->chip_data->post_gpio_reset_delay_ms);
|
||||
if (ihid_elan->chip_data->post_gpio_reset_on_delay_ms)
|
||||
msleep(ihid_elan->chip_data->post_gpio_reset_on_delay_ms);
|
||||
|
||||
return 0;
|
||||
}
|
||||
@ -64,8 +68,12 @@ static void elan_i2c_hid_power_down(struct i2chid_ops *ops)
|
||||
container_of(ops, struct i2c_hid_of_elan, ops);
|
||||
|
||||
gpiod_set_value_cansleep(ihid_elan->reset_gpio, 1);
|
||||
if (ihid_elan->chip_data->post_gpio_reset_off_delay_ms)
|
||||
msleep(ihid_elan->chip_data->post_gpio_reset_off_delay_ms);
|
||||
|
||||
regulator_disable(ihid_elan->vccio);
|
||||
regulator_disable(ihid_elan->vcc33);
|
||||
if (ihid_elan->vcc33)
|
||||
regulator_disable(ihid_elan->vcc33);
|
||||
}
|
||||
|
||||
static int i2c_hid_of_elan_probe(struct i2c_client *client)
|
||||
@ -89,24 +97,42 @@ static int i2c_hid_of_elan_probe(struct i2c_client *client)
|
||||
if (IS_ERR(ihid_elan->vccio))
|
||||
return PTR_ERR(ihid_elan->vccio);
|
||||
|
||||
ihid_elan->vcc33 = devm_regulator_get(&client->dev, "vcc33");
|
||||
if (IS_ERR(ihid_elan->vcc33))
|
||||
return PTR_ERR(ihid_elan->vcc33);
|
||||
|
||||
ihid_elan->chip_data = device_get_match_data(&client->dev);
|
||||
|
||||
if (ihid_elan->chip_data->main_supply_name) {
|
||||
ihid_elan->vcc33 = devm_regulator_get(&client->dev,
|
||||
ihid_elan->chip_data->main_supply_name);
|
||||
if (IS_ERR(ihid_elan->vcc33))
|
||||
return PTR_ERR(ihid_elan->vcc33);
|
||||
}
|
||||
|
||||
return i2c_hid_core_probe(client, &ihid_elan->ops,
|
||||
ihid_elan->chip_data->hid_descriptor_address, 0);
|
||||
}
|
||||
|
||||
static const struct elan_i2c_hid_chip_data elan_ekth6915_chip_data = {
|
||||
.post_power_delay_ms = 1,
|
||||
.post_gpio_reset_delay_ms = 300,
|
||||
.post_gpio_reset_on_delay_ms = 300,
|
||||
.hid_descriptor_address = 0x0001,
|
||||
.main_supply_name = "vcc33",
|
||||
};
|
||||
|
||||
static const struct elan_i2c_hid_chip_data ilitek_ili9882t_chip_data = {
|
||||
.post_power_delay_ms = 1,
|
||||
.post_gpio_reset_on_delay_ms = 200,
|
||||
.post_gpio_reset_off_delay_ms = 65,
|
||||
.hid_descriptor_address = 0x0001,
|
||||
/*
|
||||
* this touchscreen is tightly integrated with the panel and assumes
|
||||
* that the relevant power rails (other than the IO rail) have already
|
||||
* been turned on by the panel driver because we're a panel follower.
|
||||
*/
|
||||
.main_supply_name = NULL,
|
||||
};
|
||||
|
||||
static const struct of_device_id elan_i2c_hid_of_match[] = {
|
||||
{ .compatible = "elan,ekth6915", .data = &elan_ekth6915_chip_data },
|
||||
{ .compatible = "ilitek,ili9882t", .data = &ilitek_ili9882t_chip_data },
|
||||
{ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, elan_i2c_hid_of_match);
|
||||
|
Loading…
Reference in New Issue
Block a user