From 1ae842de1dd8051cbb65b396b6f029d07f992641 Mon Sep 17 00:00:00 2001 From: Alexandre Bounine Date: Tue, 2 Aug 2016 14:06:57 -0700 Subject: [PATCH] rapidio: modify for rev.3 specification changes Implement changes made in RapidIO specification rev.3 to LP-Serial Physical Layer register definitions: - use per-port register offset calculations based on LP-Serial Extended Features Block (EFB) Register Map type (I or II) with different per-port offset step (0x20 vs 0x40 respectfully). - remove deprecated Parallel Physical layer definitions and related code. [alexandre.bounine@idt.com: fix DocBook warning for gen3 update] Link: http://lkml.kernel.org/r/1469191173-19338-1-git-send-email-alexandre.bounine@idt.com Link: http://lkml.kernel.org/r/1469125134-16523-12-git-send-email-alexandre.bounine@idt.com Signed-off-by: Alexandre Bounine Tested-by: Barry Wood Cc: Matt Porter Cc: Andre van Herk Cc: Barry Wood Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rapidio/devices/rio_mport_cdev.c | 2 +- drivers/rapidio/devices/tsi721.c | 8 +- drivers/rapidio/rio-scan.c | 74 +++------- drivers/rapidio/rio.c | 150 ++++++++++---------- drivers/rapidio/rio.h | 2 +- drivers/rapidio/switches/tsi57x.c | 26 ++-- include/linux/rio.h | 11 +- include/linux/rio_regs.h | 167 ++++++++++++++++++----- 8 files changed, 249 insertions(+), 191 deletions(-) diff --git a/drivers/rapidio/devices/rio_mport_cdev.c b/drivers/rapidio/devices/rio_mport_cdev.c index de0c692587dd..436dfe871d32 100644 --- a/drivers/rapidio/devices/rio_mport_cdev.c +++ b/drivers/rapidio/devices/rio_mport_cdev.c @@ -1813,7 +1813,7 @@ static int rio_mport_add_riodev(struct mport_cdev_priv *priv, if (rdev->pef & RIO_PEF_EXT_FEATURES) { rdev->efptr = rval & 0xffff; rdev->phys_efptr = rio_mport_get_physefb(mport, 0, destid, - hopcount); + hopcount, &rdev->phys_rmap); rdev->em_efptr = rio_mport_get_feature(mport, 0, destid, hopcount, RIO_EFB_ERR_MGMNT); diff --git a/drivers/rapidio/devices/tsi721.c b/drivers/rapidio/devices/tsi721.c index 53daf634a1ac..32f0f014a067 100644 --- a/drivers/rapidio/devices/tsi721.c +++ b/drivers/rapidio/devices/tsi721.c @@ -2555,11 +2555,11 @@ static int tsi721_query_mport(struct rio_mport *mport, struct tsi721_device *priv = mport->priv; u32 rval; - rval = ioread32(priv->regs + (0x100 + RIO_PORT_N_ERR_STS_CSR(0))); + rval = ioread32(priv->regs + 0x100 + RIO_PORT_N_ERR_STS_CSR(0, 0)); if (rval & RIO_PORT_N_ERR_STS_PORT_OK) { - rval = ioread32(priv->regs + (0x100 + RIO_PORT_N_CTL2_CSR(0))); + rval = ioread32(priv->regs + 0x100 + RIO_PORT_N_CTL2_CSR(0, 0)); attr->link_speed = (rval & RIO_PORT_N_CTL2_SEL_BAUD) >> 28; - rval = ioread32(priv->regs + (0x100 + RIO_PORT_N_CTL_CSR(0))); + rval = ioread32(priv->regs + 0x100 + RIO_PORT_N_CTL_CSR(0, 0)); attr->link_width = (rval & RIO_PORT_N_CTL_IPW) >> 27; } else attr->link_speed = RIO_LINK_DOWN; @@ -2673,9 +2673,9 @@ static int tsi721_setup_mport(struct tsi721_device *priv) mport->ops = &tsi721_rio_ops; mport->index = 0; mport->sys_size = 0; /* small system */ - mport->phy_type = RIO_PHY_SERIAL; mport->priv = (void *)priv; mport->phys_efptr = 0x100; + mport->phys_rmap = 1; mport->dev.parent = &pdev->dev; mport->dev.release = tsi721_mport_release; diff --git a/drivers/rapidio/rio-scan.c b/drivers/rapidio/rio-scan.c index a63a380809d1..23429bdaca84 100644 --- a/drivers/rapidio/rio-scan.c +++ b/drivers/rapidio/rio-scan.c @@ -49,15 +49,6 @@ struct rio_id_table { static int next_destid = 0; static int next_comptag = 1; -static int rio_mport_phys_table[] = { - RIO_EFB_PAR_EP_ID, - RIO_EFB_PAR_EP_REC_ID, - RIO_EFB_SER_EP_ID, - RIO_EFB_SER_EP_REC_ID, - -1, -}; - - /** * rio_destid_alloc - Allocate next available destID for given network * @net: RIO network @@ -380,10 +371,15 @@ static struct rio_dev *rio_setup_device(struct rio_net *net, if (rdev->pef & RIO_PEF_EXT_FEATURES) { rdev->efptr = result & 0xffff; rdev->phys_efptr = rio_mport_get_physefb(port, 0, destid, - hopcount); + hopcount, &rdev->phys_rmap); + pr_debug("RIO: %s Register Map %d device\n", + __func__, rdev->phys_rmap); rdev->em_efptr = rio_mport_get_feature(port, 0, destid, hopcount, RIO_EFB_ERR_MGMNT); + if (!rdev->em_efptr) + rdev->em_efptr = rio_mport_get_feature(port, 0, destid, + hopcount, RIO_EFB_ERR_MGMNT_HS); } rio_mport_read_config_32(port, destid, hopcount, RIO_SRC_OPS_CAR, @@ -445,7 +441,7 @@ static struct rio_dev *rio_setup_device(struct rio_net *net, rio_route_clr_table(rdev, RIO_GLOBAL_TABLE, 0); } else { if (do_enum) - /*Enable Input Output Port (transmitter reviever)*/ + /*Enable Input Output Port (transmitter receiver)*/ rio_enable_rx_tx_port(port, 0, destid, hopcount, 0); dev_set_name(&rdev->dev, "%02x:e:%04x", rdev->net->id, @@ -481,10 +477,8 @@ cleanup: /** * rio_sport_is_active- Tests if a switch port has an active connection. - * @port: Master port to send transaction - * @destid: Associated destination ID for switch - * @hopcount: Hopcount to reach switch - * @sport: Switch port number + * @rdev: RapidIO device object + * @sp: Switch port number * * Reads the port error status CSR for a particular switch port to * determine if the port has an active link. Returns @@ -492,31 +486,12 @@ cleanup: * inactive. */ static int -rio_sport_is_active(struct rio_mport *port, u16 destid, u8 hopcount, int sport) +rio_sport_is_active(struct rio_dev *rdev, int sp) { u32 result = 0; - u32 ext_ftr_ptr; - ext_ftr_ptr = rio_mport_get_efb(port, 0, destid, hopcount, 0); - - while (ext_ftr_ptr) { - rio_mport_read_config_32(port, destid, hopcount, - ext_ftr_ptr, &result); - result = RIO_GET_BLOCK_ID(result); - if ((result == RIO_EFB_SER_EP_FREE_ID) || - (result == RIO_EFB_SER_EP_FREE_ID_V13P) || - (result == RIO_EFB_SER_EP_FREC_ID)) - break; - - ext_ftr_ptr = rio_mport_get_efb(port, 0, destid, hopcount, - ext_ftr_ptr); - } - - if (ext_ftr_ptr) - rio_mport_read_config_32(port, destid, hopcount, - ext_ftr_ptr + - RIO_PORT_N_ERR_STS_CSR(sport), - &result); + rio_read_config_32(rdev, RIO_DEV_PORT_N_ERR_STS_CSR(rdev, sp), + &result); return result & RIO_PORT_N_ERR_STS_PORT_OK; } @@ -655,9 +630,7 @@ static int rio_enum_peer(struct rio_net *net, struct rio_mport *port, cur_destid = next_destid; - if (rio_sport_is_active - (port, RIO_ANY_DESTID(port->sys_size), hopcount, - port_num)) { + if (rio_sport_is_active(rdev, port_num)) { pr_debug( "RIO: scanning device on port %d\n", port_num); @@ -785,8 +758,7 @@ rio_disc_peer(struct rio_net *net, struct rio_mport *port, u16 destid, if (RIO_GET_PORT_NUM(rdev->swpinfo) == port_num) continue; - if (rio_sport_is_active - (port, destid, hopcount, port_num)) { + if (rio_sport_is_active(rdev, port_num)) { pr_debug( "RIO: scanning device on port %d\n", port_num); @@ -831,21 +803,11 @@ rio_disc_peer(struct rio_net *net, struct rio_mport *port, u16 destid, static int rio_mport_is_active(struct rio_mport *port) { u32 result = 0; - u32 ext_ftr_ptr; - int *entry = rio_mport_phys_table; - - do { - if ((ext_ftr_ptr = - rio_mport_get_feature(port, 1, 0, 0, *entry))) - break; - } while (*++entry >= 0); - - if (ext_ftr_ptr) - rio_local_read_config_32(port, - ext_ftr_ptr + - RIO_PORT_N_ERR_STS_CSR(port->index), - &result); + rio_local_read_config_32(port, + port->phys_efptr + + RIO_PORT_N_ERR_STS_CSR(port->index, port->phys_rmap), + &result); return result & RIO_PORT_N_ERR_STS_PORT_OK; } diff --git a/drivers/rapidio/rio.c b/drivers/rapidio/rio.c index 1cd32603259f..37042858c2db 100644 --- a/drivers/rapidio/rio.c +++ b/drivers/rapidio/rio.c @@ -786,10 +786,11 @@ EXPORT_SYMBOL_GPL(rio_unmap_outb_region); * @local: Indicate a local master port or remote device access * @destid: Destination ID of the device * @hopcount: Number of switch hops to the device + * @rmap: pointer to location to store register map type info */ u32 rio_mport_get_physefb(struct rio_mport *port, int local, - u16 destid, u8 hopcount) + u16 destid, u8 hopcount, u32 *rmap) { u32 ext_ftr_ptr; u32 ftr_header; @@ -807,14 +808,21 @@ rio_mport_get_physefb(struct rio_mport *port, int local, ftr_header = RIO_GET_BLOCK_ID(ftr_header); switch (ftr_header) { - case RIO_EFB_SER_EP_ID_V13P: - case RIO_EFB_SER_EP_REC_ID_V13P: - case RIO_EFB_SER_EP_FREE_ID_V13P: case RIO_EFB_SER_EP_ID: case RIO_EFB_SER_EP_REC_ID: case RIO_EFB_SER_EP_FREE_ID: - case RIO_EFB_SER_EP_FREC_ID: + case RIO_EFB_SER_EP_M1_ID: + case RIO_EFB_SER_EP_SW_M1_ID: + case RIO_EFB_SER_EPF_M1_ID: + case RIO_EFB_SER_EPF_SW_M1_ID: + *rmap = 1; + return ext_ftr_ptr; + case RIO_EFB_SER_EP_M2_ID: + case RIO_EFB_SER_EP_SW_M2_ID: + case RIO_EFB_SER_EPF_M2_ID: + case RIO_EFB_SER_EPF_SW_M2_ID: + *rmap = 2; return ext_ftr_ptr; default: @@ -873,16 +881,16 @@ int rio_set_port_lockout(struct rio_dev *rdev, u32 pnum, int lock) u32 regval; rio_read_config_32(rdev, - rdev->phys_efptr + RIO_PORT_N_CTL_CSR(pnum), - ®val); + RIO_DEV_PORT_N_CTL_CSR(rdev, pnum), + ®val); if (lock) regval |= RIO_PORT_N_CTL_LOCKOUT; else regval &= ~RIO_PORT_N_CTL_LOCKOUT; rio_write_config_32(rdev, - rdev->phys_efptr + RIO_PORT_N_CTL_CSR(pnum), - regval); + RIO_DEV_PORT_N_CTL_CSR(rdev, pnum), + regval); return 0; } EXPORT_SYMBOL_GPL(rio_set_port_lockout); @@ -906,6 +914,7 @@ int rio_enable_rx_tx_port(struct rio_mport *port, #ifdef CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS u32 regval; u32 ext_ftr_ptr; + u32 rmap; /* * enable rx input tx output port @@ -913,34 +922,29 @@ int rio_enable_rx_tx_port(struct rio_mport *port, pr_debug("rio_enable_rx_tx_port(local = %d, destid = %d, hopcount = " "%d, port_num = %d)\n", local, destid, hopcount, port_num); - ext_ftr_ptr = rio_mport_get_physefb(port, local, destid, hopcount); + ext_ftr_ptr = rio_mport_get_physefb(port, local, destid, + hopcount, &rmap); if (local) { - rio_local_read_config_32(port, ext_ftr_ptr + - RIO_PORT_N_CTL_CSR(0), + rio_local_read_config_32(port, + ext_ftr_ptr + RIO_PORT_N_CTL_CSR(0, rmap), ®val); } else { if (rio_mport_read_config_32(port, destid, hopcount, - ext_ftr_ptr + RIO_PORT_N_CTL_CSR(port_num), ®val) < 0) + ext_ftr_ptr + RIO_PORT_N_CTL_CSR(port_num, rmap), + ®val) < 0) return -EIO; } - if (regval & RIO_PORT_N_CTL_P_TYP_SER) { - /* serial */ - regval = regval | RIO_PORT_N_CTL_EN_RX_SER - | RIO_PORT_N_CTL_EN_TX_SER; - } else { - /* parallel */ - regval = regval | RIO_PORT_N_CTL_EN_RX_PAR - | RIO_PORT_N_CTL_EN_TX_PAR; - } + regval = regval | RIO_PORT_N_CTL_EN_RX | RIO_PORT_N_CTL_EN_TX; if (local) { - rio_local_write_config_32(port, ext_ftr_ptr + - RIO_PORT_N_CTL_CSR(0), regval); + rio_local_write_config_32(port, + ext_ftr_ptr + RIO_PORT_N_CTL_CSR(0, rmap), regval); } else { if (rio_mport_write_config_32(port, destid, hopcount, - ext_ftr_ptr + RIO_PORT_N_CTL_CSR(port_num), regval) < 0) + ext_ftr_ptr + RIO_PORT_N_CTL_CSR(port_num, rmap), + regval) < 0) return -EIO; } #endif @@ -1042,14 +1046,14 @@ rio_get_input_status(struct rio_dev *rdev, int pnum, u32 *lnkresp) /* Read from link maintenance response register * to clear valid bit */ rio_read_config_32(rdev, - rdev->phys_efptr + RIO_PORT_N_MNT_RSP_CSR(pnum), + RIO_DEV_PORT_N_MNT_RSP_CSR(rdev, pnum), ®val); udelay(50); } /* Issue Input-status command */ rio_write_config_32(rdev, - rdev->phys_efptr + RIO_PORT_N_MNT_REQ_CSR(pnum), + RIO_DEV_PORT_N_MNT_REQ_CSR(rdev, pnum), RIO_MNT_REQ_CMD_IS); /* Exit if the response is not expected */ @@ -1060,7 +1064,7 @@ rio_get_input_status(struct rio_dev *rdev, int pnum, u32 *lnkresp) while (checkcount--) { udelay(50); rio_read_config_32(rdev, - rdev->phys_efptr + RIO_PORT_N_MNT_RSP_CSR(pnum), + RIO_DEV_PORT_N_MNT_RSP_CSR(rdev, pnum), ®val); if (regval & RIO_PORT_N_MNT_RSP_RVAL) { *lnkresp = regval; @@ -1076,6 +1080,13 @@ rio_get_input_status(struct rio_dev *rdev, int pnum, u32 *lnkresp) * @rdev: Pointer to RIO device control structure * @pnum: Switch port number to clear errors * @err_status: port error status (if 0 reads register from device) + * + * TODO: Currently this routine is not compatible with recovery process + * specified for idt_gen3 RapidIO switch devices. It has to be reviewed + * to implement universal recovery process that is compatible full range + * off available devices. + * IDT gen3 switch driver now implements HW-specific error handler that + * issues soft port reset to the port to reset ERR_STOP bits and ackIDs. */ static int rio_clr_err_stopped(struct rio_dev *rdev, u32 pnum, u32 err_status) { @@ -1085,10 +1096,10 @@ static int rio_clr_err_stopped(struct rio_dev *rdev, u32 pnum, u32 err_status) if (err_status == 0) rio_read_config_32(rdev, - rdev->phys_efptr + RIO_PORT_N_ERR_STS_CSR(pnum), + RIO_DEV_PORT_N_ERR_STS_CSR(rdev, pnum), &err_status); - if (err_status & RIO_PORT_N_ERR_STS_PW_OUT_ES) { + if (err_status & RIO_PORT_N_ERR_STS_OUT_ES) { pr_debug("RIO_EM: servicing Output Error-Stopped state\n"); /* * Send a Link-Request/Input-Status control symbol @@ -1103,7 +1114,7 @@ static int rio_clr_err_stopped(struct rio_dev *rdev, u32 pnum, u32 err_status) far_ackid = (regval & RIO_PORT_N_MNT_RSP_ASTAT) >> 5; far_linkstat = regval & RIO_PORT_N_MNT_RSP_LSTAT; rio_read_config_32(rdev, - rdev->phys_efptr + RIO_PORT_N_ACK_STS_CSR(pnum), + RIO_DEV_PORT_N_ACK_STS_CSR(rdev, pnum), ®val); pr_debug("RIO_EM: SP%d_ACK_STS_CSR=0x%08x\n", pnum, regval); near_ackid = (regval & RIO_PORT_N_ACK_INBOUND) >> 24; @@ -1121,43 +1132,43 @@ static int rio_clr_err_stopped(struct rio_dev *rdev, u32 pnum, u32 err_status) * far inbound. */ rio_write_config_32(rdev, - rdev->phys_efptr + RIO_PORT_N_ACK_STS_CSR(pnum), + RIO_DEV_PORT_N_ACK_STS_CSR(rdev, pnum), (near_ackid << 24) | (far_ackid << 8) | far_ackid); /* Align far outstanding/outbound ackIDs with * near inbound. */ far_ackid++; - if (nextdev) - rio_write_config_32(nextdev, - nextdev->phys_efptr + - RIO_PORT_N_ACK_STS_CSR(RIO_GET_PORT_NUM(nextdev->swpinfo)), - (far_ackid << 24) | - (near_ackid << 8) | near_ackid); - else - pr_debug("RIO_EM: Invalid nextdev pointer (NULL)\n"); + if (!nextdev) { + pr_debug("RIO_EM: nextdev pointer == NULL\n"); + goto rd_err; + } + + rio_write_config_32(nextdev, + RIO_DEV_PORT_N_ACK_STS_CSR(nextdev, + RIO_GET_PORT_NUM(nextdev->swpinfo)), + (far_ackid << 24) | + (near_ackid << 8) | near_ackid); } rd_err: - rio_read_config_32(rdev, - rdev->phys_efptr + RIO_PORT_N_ERR_STS_CSR(pnum), - &err_status); + rio_read_config_32(rdev, RIO_DEV_PORT_N_ERR_STS_CSR(rdev, pnum), + &err_status); pr_debug("RIO_EM: SP%d_ERR_STS_CSR=0x%08x\n", pnum, err_status); } - if ((err_status & RIO_PORT_N_ERR_STS_PW_INP_ES) && nextdev) { + if ((err_status & RIO_PORT_N_ERR_STS_INP_ES) && nextdev) { pr_debug("RIO_EM: servicing Input Error-Stopped state\n"); rio_get_input_status(nextdev, RIO_GET_PORT_NUM(nextdev->swpinfo), NULL); udelay(50); - rio_read_config_32(rdev, - rdev->phys_efptr + RIO_PORT_N_ERR_STS_CSR(pnum), - &err_status); + rio_read_config_32(rdev, RIO_DEV_PORT_N_ERR_STS_CSR(rdev, pnum), + &err_status); pr_debug("RIO_EM: SP%d_ERR_STS_CSR=0x%08x\n", pnum, err_status); } - return (err_status & (RIO_PORT_N_ERR_STS_PW_OUT_ES | - RIO_PORT_N_ERR_STS_PW_INP_ES)) ? 1 : 0; + return (err_status & (RIO_PORT_N_ERR_STS_OUT_ES | + RIO_PORT_N_ERR_STS_INP_ES)) ? 1 : 0; } /** @@ -1257,9 +1268,8 @@ int rio_inb_pwrite_handler(struct rio_mport *mport, union rio_pw_msg *pw_msg) if (rdev->rswitch->ops && rdev->rswitch->ops->em_handle) rdev->rswitch->ops->em_handle(rdev, portnum); - rio_read_config_32(rdev, - rdev->phys_efptr + RIO_PORT_N_ERR_STS_CSR(portnum), - &err_status); + rio_read_config_32(rdev, RIO_DEV_PORT_N_ERR_STS_CSR(rdev, portnum), + &err_status); pr_debug("RIO_PW: SP%d_ERR_STS_CSR=0x%08x\n", portnum, err_status); if (err_status & RIO_PORT_N_ERR_STS_PORT_OK) { @@ -1276,8 +1286,8 @@ int rio_inb_pwrite_handler(struct rio_mport *mport, union rio_pw_msg *pw_msg) * Depending on the link partner state, two attempts * may be needed for successful recovery. */ - if (err_status & (RIO_PORT_N_ERR_STS_PW_OUT_ES | - RIO_PORT_N_ERR_STS_PW_INP_ES)) { + if (err_status & (RIO_PORT_N_ERR_STS_OUT_ES | + RIO_PORT_N_ERR_STS_INP_ES)) { if (rio_clr_err_stopped(rdev, portnum, err_status)) rio_clr_err_stopped(rdev, portnum, 0); } @@ -1287,10 +1297,18 @@ int rio_inb_pwrite_handler(struct rio_mport *mport, union rio_pw_msg *pw_msg) rdev->rswitch->port_ok &= ~(1 << portnum); rio_set_port_lockout(rdev, portnum, 1); + if (rdev->phys_rmap == 1) { rio_write_config_32(rdev, - rdev->phys_efptr + - RIO_PORT_N_ACK_STS_CSR(portnum), + RIO_DEV_PORT_N_ACK_STS_CSR(rdev, portnum), RIO_PORT_N_ACK_CLEAR); + } else { + rio_write_config_32(rdev, + RIO_DEV_PORT_N_OB_ACK_CSR(rdev, portnum), + RIO_PORT_N_OB_ACK_CLEAR); + rio_write_config_32(rdev, + RIO_DEV_PORT_N_IB_ACK_CSR(rdev, portnum), + 0); + } /* Schedule Extraction Service */ pr_debug("RIO_PW: Device Extraction on [%s]-P%d\n", @@ -1319,9 +1337,8 @@ int rio_inb_pwrite_handler(struct rio_mport *mport, union rio_pw_msg *pw_msg) } /* Clear remaining error bits and Port-Write Pending bit */ - rio_write_config_32(rdev, - rdev->phys_efptr + RIO_PORT_N_ERR_STS_CSR(portnum), - err_status); + rio_write_config_32(rdev, RIO_DEV_PORT_N_ERR_STS_CSR(rdev, portnum), + err_status); return 0; } @@ -1372,20 +1389,7 @@ EXPORT_SYMBOL_GPL(rio_mport_get_efb); * Tell if a device supports a given RapidIO capability. * Returns the offset of the requested extended feature * block within the device's RIO configuration space or - * 0 in case the device does not support it. Possible - * values for @ftr: - * - * %RIO_EFB_PAR_EP_ID LP/LVDS EP Devices - * - * %RIO_EFB_PAR_EP_REC_ID LP/LVDS EP Recovery Devices - * - * %RIO_EFB_PAR_EP_FREE_ID LP/LVDS EP Free Devices - * - * %RIO_EFB_SER_EP_ID LP/Serial EP Devices - * - * %RIO_EFB_SER_EP_REC_ID LP/Serial EP Recovery Devices - * - * %RIO_EFB_SER_EP_FREE_ID LP/Serial EP Free Devices + * 0 in case the device does not support it. */ u32 rio_mport_get_feature(struct rio_mport * port, int local, u16 destid, diff --git a/drivers/rapidio/rio.h b/drivers/rapidio/rio.h index 625d09add001..9796b3fee70d 100644 --- a/drivers/rapidio/rio.h +++ b/drivers/rapidio/rio.h @@ -22,7 +22,7 @@ extern u32 rio_mport_get_feature(struct rio_mport *mport, int local, u16 destid, u8 hopcount, int ftr); extern u32 rio_mport_get_physefb(struct rio_mport *port, int local, - u16 destid, u8 hopcount); + u16 destid, u8 hopcount, u32 *rmap); extern u32 rio_mport_get_efb(struct rio_mport *port, int local, u16 destid, u8 hopcount, u32 from); extern int rio_mport_chk_dev_access(struct rio_mport *mport, u16 destid, diff --git a/drivers/rapidio/switches/tsi57x.c b/drivers/rapidio/switches/tsi57x.c index 42c8b014fe15..2700d15f7584 100644 --- a/drivers/rapidio/switches/tsi57x.c +++ b/drivers/rapidio/switches/tsi57x.c @@ -175,12 +175,10 @@ tsi57x_em_init(struct rio_dev *rdev) /* Clear all pending interrupts */ rio_read_config_32(rdev, - rdev->phys_efptr + - RIO_PORT_N_ERR_STS_CSR(portnum), + RIO_DEV_PORT_N_ERR_STS_CSR(rdev, portnum), ®val); rio_write_config_32(rdev, - rdev->phys_efptr + - RIO_PORT_N_ERR_STS_CSR(portnum), + RIO_DEV_PORT_N_ERR_STS_CSR(rdev, portnum), regval & 0x07120214); rio_read_config_32(rdev, @@ -198,7 +196,7 @@ tsi57x_em_init(struct rio_dev *rdev) /* Skip next (odd) port if the current port is in x4 mode */ rio_read_config_32(rdev, - rdev->phys_efptr + RIO_PORT_N_CTL_CSR(portnum), + RIO_DEV_PORT_N_CTL_CSR(rdev, portnum), ®val); if ((regval & RIO_PORT_N_CTL_PWIDTH) == RIO_PORT_N_CTL_PWIDTH_4) portnum++; @@ -221,23 +219,23 @@ tsi57x_em_handler(struct rio_dev *rdev, u8 portnum) u32 regval; rio_read_config_32(rdev, - rdev->phys_efptr + RIO_PORT_N_ERR_STS_CSR(portnum), + RIO_DEV_PORT_N_ERR_STS_CSR(rdev, portnum), &err_status); if ((err_status & RIO_PORT_N_ERR_STS_PORT_OK) && - (err_status & (RIO_PORT_N_ERR_STS_PW_OUT_ES | - RIO_PORT_N_ERR_STS_PW_INP_ES))) { + (err_status & (RIO_PORT_N_ERR_STS_OUT_ES | + RIO_PORT_N_ERR_STS_INP_ES))) { /* Remove any queued packets by locking/unlocking port */ rio_read_config_32(rdev, - rdev->phys_efptr + RIO_PORT_N_CTL_CSR(portnum), + RIO_DEV_PORT_N_CTL_CSR(rdev, portnum), ®val); if (!(regval & RIO_PORT_N_CTL_LOCKOUT)) { rio_write_config_32(rdev, - rdev->phys_efptr + RIO_PORT_N_CTL_CSR(portnum), + RIO_DEV_PORT_N_CTL_CSR(rdev, portnum), regval | RIO_PORT_N_CTL_LOCKOUT); udelay(50); rio_write_config_32(rdev, - rdev->phys_efptr + RIO_PORT_N_CTL_CSR(portnum), + RIO_DEV_PORT_N_CTL_CSR(rdev, portnum), regval); } @@ -245,7 +243,7 @@ tsi57x_em_handler(struct rio_dev *rdev, u8 portnum) * valid bit */ rio_read_config_32(rdev, - rdev->phys_efptr + RIO_PORT_N_MNT_RSP_CSR(portnum), + RIO_DEV_PORT_N_MNT_RSP_CSR(rdev, portnum), ®val); /* Send a Packet-Not-Accepted/Link-Request-Input-Status control @@ -259,8 +257,8 @@ tsi57x_em_handler(struct rio_dev *rdev, u8 portnum) while (checkcount--) { udelay(50); rio_read_config_32(rdev, - rdev->phys_efptr + - RIO_PORT_N_MNT_RSP_CSR(portnum), + RIO_DEV_PORT_N_MNT_RSP_CSR(rdev, + portnum), ®val); if (regval & RIO_PORT_N_MNT_RSP_RVAL) goto exit_es; diff --git a/include/linux/rio.h b/include/linux/rio.h index f7ec35b48800..37b95c4af99d 100644 --- a/include/linux/rio.h +++ b/include/linux/rio.h @@ -163,6 +163,7 @@ enum rio_device_state { * @dst_ops: Destination operation capabilities * @comp_tag: RIO component tag * @phys_efptr: RIO device extended features pointer + * @phys_rmap: LP-Serial Register Map Type (1 or 2) * @em_efptr: RIO Error Management features pointer * @dma_mask: Mask of bits of RIO address this device implements * @driver: Driver claiming this device @@ -193,6 +194,7 @@ struct rio_dev { u32 dst_ops; u32 comp_tag; u32 phys_efptr; + u32 phys_rmap; u32 em_efptr; u64 dma_mask; struct rio_driver *driver; /* RIO driver claiming this device */ @@ -237,11 +239,6 @@ struct rio_dbell { void *dev_id; }; -enum rio_phy_type { - RIO_PHY_PARALLEL, - RIO_PHY_SERIAL, -}; - /** * struct rio_mport - RIO master port info * @dbells: List of doorbell events @@ -259,8 +256,8 @@ enum rio_phy_type { * @id: Port ID, unique among all ports * @index: Port index, unique among all port interfaces of the same type * @sys_size: RapidIO common transport system size - * @phy_type: RapidIO phy type * @phys_efptr: RIO port extended features pointer + * @phys_rmap: LP-Serial EFB Register Mapping type (1 or 2). * @name: Port name string * @dev: device structure associated with an mport * @priv: Master port private data @@ -289,8 +286,8 @@ struct rio_mport { * 0 - Small size. 256 devices. * 1 - Large size, 65536 devices. */ - enum rio_phy_type phy_type; /* RapidIO phy type */ u32 phys_efptr; + u32 phys_rmap; unsigned char name[RIO_MAX_MPORT_NAME]; struct device dev; void *priv; /* Master port private data */ diff --git a/include/linux/rio_regs.h b/include/linux/rio_regs.h index 1063ae382bc2..40c04efe7409 100644 --- a/include/linux/rio_regs.h +++ b/include/linux/rio_regs.h @@ -42,9 +42,11 @@ #define RIO_PEF_INB_MBOX2 0x00200000 /* [II, <= 1.2] Mailbox 2 */ #define RIO_PEF_INB_MBOX3 0x00100000 /* [II, <= 1.2] Mailbox 3 */ #define RIO_PEF_INB_DOORBELL 0x00080000 /* [II, <= 1.2] Doorbells */ +#define RIO_PEF_DEV32 0x00001000 /* [III] PE supports Common TRansport Dev32 */ #define RIO_PEF_EXT_RT 0x00000200 /* [III, 1.3] Extended route table support */ #define RIO_PEF_STD_RT 0x00000100 /* [III, 1.3] Standard route table support */ -#define RIO_PEF_CTLS 0x00000010 /* [III] CTLS */ +#define RIO_PEF_CTLS 0x00000010 /* [III] Common Transport Large System (< rev.3) */ +#define RIO_PEF_DEV16 0x00000010 /* [III] PE Supports Common Transport Dev16 (rev.3) */ #define RIO_PEF_EXT_FEATURES 0x00000008 /* [I] EFT_PTR valid */ #define RIO_PEF_ADDR_66 0x00000004 /* [I] 66 bits */ #define RIO_PEF_ADDR_50 0x00000002 /* [I] 50 bits */ @@ -194,70 +196,101 @@ #define RIO_GET_BLOCK_ID(x) (x & RIO_EFB_ID_MASK) /* Extended Feature Block IDs */ -#define RIO_EFB_PAR_EP_ID 0x0001 /* [IV] LP/LVDS EP Devices */ -#define RIO_EFB_PAR_EP_REC_ID 0x0002 /* [IV] LP/LVDS EP Recovery Devices */ -#define RIO_EFB_PAR_EP_FREE_ID 0x0003 /* [IV] LP/LVDS EP Free Devices */ -#define RIO_EFB_SER_EP_ID_V13P 0x0001 /* [VI] LP/Serial EP Devices, RapidIO Spec ver 1.3 and above */ -#define RIO_EFB_SER_EP_REC_ID_V13P 0x0002 /* [VI] LP/Serial EP Recovery Devices, RapidIO Spec ver 1.3 and above */ -#define RIO_EFB_SER_EP_FREE_ID_V13P 0x0003 /* [VI] LP/Serial EP Free Devices, RapidIO Spec ver 1.3 and above */ -#define RIO_EFB_SER_EP_ID 0x0004 /* [VI] LP/Serial EP Devices */ -#define RIO_EFB_SER_EP_REC_ID 0x0005 /* [VI] LP/Serial EP Recovery Devices */ -#define RIO_EFB_SER_EP_FREE_ID 0x0006 /* [VI] LP/Serial EP Free Devices */ -#define RIO_EFB_SER_EP_FREC_ID 0x0009 /* [VI] LP/Serial EP Free Recovery Devices */ +#define RIO_EFB_SER_EP_M1_ID 0x0001 /* [VI] LP-Serial EP Devices, Map I */ +#define RIO_EFB_SER_EP_SW_M1_ID 0x0002 /* [VI] LP-Serial EP w SW Recovery Devices, Map I */ +#define RIO_EFB_SER_EPF_M1_ID 0x0003 /* [VI] LP-Serial EP Free Devices, Map I */ +#define RIO_EFB_SER_EP_ID 0x0004 /* [VI] LP-Serial EP Devices, RIO 1.2 */ +#define RIO_EFB_SER_EP_REC_ID 0x0005 /* [VI] LP-Serial EP w SW Recovery Devices, RIO 1.2 */ +#define RIO_EFB_SER_EP_FREE_ID 0x0006 /* [VI] LP-Serial EP Free Devices, RIO 1.2 */ #define RIO_EFB_ERR_MGMNT 0x0007 /* [VIII] Error Management Extensions */ +#define RIO_EFB_SER_EPF_SW_M1_ID 0x0009 /* [VI] LP-Serial EP Free w SW Recovery Devices, Map I */ +#define RIO_EFB_SW_ROUTING_TBL 0x000E /* [III] Switch Routing Table Block */ +#define RIO_EFB_SER_EP_M2_ID 0x0011 /* [VI] LP-Serial EP Devices, Map II */ +#define RIO_EFB_SER_EP_SW_M2_ID 0x0012 /* [VI] LP-Serial EP w SW Recovery Devices, Map II */ +#define RIO_EFB_SER_EPF_M2_ID 0x0013 /* [VI] LP-Serial EP Free Devices, Map II */ +#define RIO_EFB_ERR_MGMNT_HS 0x0017 /* [VIII] Error Management Extensions, Hot-Swap only */ +#define RIO_EFB_SER_EPF_SW_M2_ID 0x0019 /* [VI] LP-Serial EP Free w SW Recovery Devices, Map II */ /* - * Physical 8/16 LP-LVDS - * ID=0x0001, Generic End Point Devices - * ID=0x0002, Generic End Point Devices, software assisted recovery option - * ID=0x0003, Generic End Point Free Devices - * - * Physical LP-Serial - * ID=0x0004, Generic End Point Devices - * ID=0x0005, Generic End Point Devices, software assisted recovery option - * ID=0x0006, Generic End Point Free Devices + * Physical LP-Serial Registers Definitions + * Parameters in register macros: + * n - port number, m - Register Map Type (1 or 2) */ #define RIO_PORT_MNT_HEADER 0x0000 #define RIO_PORT_REQ_CTL_CSR 0x0020 -#define RIO_PORT_RSP_CTL_CSR 0x0024 /* 0x0001/0x0002 */ -#define RIO_PORT_LINKTO_CTL_CSR 0x0020 /* Serial */ -#define RIO_PORT_RSPTO_CTL_CSR 0x0024 /* Serial */ +#define RIO_PORT_RSP_CTL_CSR 0x0024 +#define RIO_PORT_LINKTO_CTL_CSR 0x0020 +#define RIO_PORT_RSPTO_CTL_CSR 0x0024 #define RIO_PORT_GEN_CTL_CSR 0x003c #define RIO_PORT_GEN_HOST 0x80000000 #define RIO_PORT_GEN_MASTER 0x40000000 #define RIO_PORT_GEN_DISCOVERED 0x20000000 -#define RIO_PORT_N_MNT_REQ_CSR(x) (0x0040 + x*0x20) /* 0x0002 */ +#define RIO_PORT_N_MNT_REQ_CSR(n, m) (0x40 + (n) * (0x20 * (m))) #define RIO_MNT_REQ_CMD_RD 0x03 /* Reset-device command */ #define RIO_MNT_REQ_CMD_IS 0x04 /* Input-status command */ -#define RIO_PORT_N_MNT_RSP_CSR(x) (0x0044 + x*0x20) /* 0x0002 */ +#define RIO_PORT_N_MNT_RSP_CSR(n, m) (0x44 + (n) * (0x20 * (m))) #define RIO_PORT_N_MNT_RSP_RVAL 0x80000000 /* Response Valid */ #define RIO_PORT_N_MNT_RSP_ASTAT 0x000007e0 /* ackID Status */ #define RIO_PORT_N_MNT_RSP_LSTAT 0x0000001f /* Link Status */ -#define RIO_PORT_N_ACK_STS_CSR(x) (0x0048 + x*0x20) /* 0x0002 */ +#define RIO_PORT_N_ACK_STS_CSR(n) (0x48 + (n) * 0x20) /* Only in RM-I */ #define RIO_PORT_N_ACK_CLEAR 0x80000000 #define RIO_PORT_N_ACK_INBOUND 0x3f000000 #define RIO_PORT_N_ACK_OUTSTAND 0x00003f00 #define RIO_PORT_N_ACK_OUTBOUND 0x0000003f -#define RIO_PORT_N_CTL2_CSR(x) (0x0054 + x*0x20) +#define RIO_PORT_N_CTL2_CSR(n, m) (0x54 + (n) * (0x20 * (m))) #define RIO_PORT_N_CTL2_SEL_BAUD 0xf0000000 -#define RIO_PORT_N_ERR_STS_CSR(x) (0x0058 + x*0x20) -#define RIO_PORT_N_ERR_STS_PW_OUT_ES 0x00010000 /* Output Error-stopped */ -#define RIO_PORT_N_ERR_STS_PW_INP_ES 0x00000100 /* Input Error-stopped */ +#define RIO_PORT_N_ERR_STS_CSR(n, m) (0x58 + (n) * (0x20 * (m))) +#define RIO_PORT_N_ERR_STS_OUT_ES 0x00010000 /* Output Error-stopped */ +#define RIO_PORT_N_ERR_STS_INP_ES 0x00000100 /* Input Error-stopped */ #define RIO_PORT_N_ERR_STS_PW_PEND 0x00000010 /* Port-Write Pending */ +#define RIO_PORT_N_ERR_STS_PORT_UA 0x00000008 /* Port Unavailable */ #define RIO_PORT_N_ERR_STS_PORT_ERR 0x00000004 #define RIO_PORT_N_ERR_STS_PORT_OK 0x00000002 #define RIO_PORT_N_ERR_STS_PORT_UNINIT 0x00000001 -#define RIO_PORT_N_CTL_CSR(x) (0x005c + x*0x20) +#define RIO_PORT_N_CTL_CSR(n, m) (0x5c + (n) * (0x20 * (m))) #define RIO_PORT_N_CTL_PWIDTH 0xc0000000 #define RIO_PORT_N_CTL_PWIDTH_1 0x00000000 #define RIO_PORT_N_CTL_PWIDTH_4 0x40000000 #define RIO_PORT_N_CTL_IPW 0x38000000 /* Initialized Port Width */ #define RIO_PORT_N_CTL_P_TYP_SER 0x00000001 #define RIO_PORT_N_CTL_LOCKOUT 0x00000002 -#define RIO_PORT_N_CTL_EN_RX_SER 0x00200000 -#define RIO_PORT_N_CTL_EN_TX_SER 0x00400000 -#define RIO_PORT_N_CTL_EN_RX_PAR 0x08000000 -#define RIO_PORT_N_CTL_EN_TX_PAR 0x40000000 +#define RIO_PORT_N_CTL_EN_RX 0x00200000 +#define RIO_PORT_N_CTL_EN_TX 0x00400000 +#define RIO_PORT_N_OB_ACK_CSR(n) (0x60 + (n) * 0x40) /* Only in RM-II */ +#define RIO_PORT_N_OB_ACK_CLEAR 0x80000000 +#define RIO_PORT_N_OB_ACK_OUTSTD 0x00fff000 +#define RIO_PORT_N_OB_ACK_OUTBND 0x00000fff +#define RIO_PORT_N_IB_ACK_CSR(n) (0x64 + (n) * 0x40) /* Only in RM-II */ +#define RIO_PORT_N_IB_ACK_INBND 0x00000fff + +/* + * Device-based helper macros for serial port register access. + * d - pointer to rapidio device object, n - port number + */ + +#define RIO_DEV_PORT_N_MNT_REQ_CSR(d, n) \ + (d->phys_efptr + RIO_PORT_N_MNT_REQ_CSR(n, d->phys_rmap)) + +#define RIO_DEV_PORT_N_MNT_RSP_CSR(d, n) \ + (d->phys_efptr + RIO_PORT_N_MNT_RSP_CSR(n, d->phys_rmap)) + +#define RIO_DEV_PORT_N_ACK_STS_CSR(d, n) \ + (d->phys_efptr + RIO_PORT_N_ACK_STS_CSR(n)) + +#define RIO_DEV_PORT_N_CTL2_CSR(d, n) \ + (d->phys_efptr + RIO_PORT_N_CTL2_CSR(n, d->phys_rmap)) + +#define RIO_DEV_PORT_N_ERR_STS_CSR(d, n) \ + (d->phys_efptr + RIO_PORT_N_ERR_STS_CSR(n, d->phys_rmap)) + +#define RIO_DEV_PORT_N_CTL_CSR(d, n) \ + (d->phys_efptr + RIO_PORT_N_CTL_CSR(n, d->phys_rmap)) + +#define RIO_DEV_PORT_N_OB_ACK_CSR(d, n) \ + (d->phys_efptr + RIO_PORT_N_OB_ACK_CSR(n)) + +#define RIO_DEV_PORT_N_IB_ACK_CSR(d, n) \ + (d->phys_efptr + RIO_PORT_N_IB_ACK_CSR(n)) /* * Error Management Extensions (RapidIO 1.3+, Part 8) @@ -268,6 +301,7 @@ /* General EM Registers (Common for all Ports) */ #define RIO_EM_EFB_HEADER 0x000 /* Error Management Extensions Block Header */ +#define RIO_EM_EMHS_CAR 0x004 /* EM Functionality CAR */ #define RIO_EM_LTL_ERR_DETECT 0x008 /* Logical/Transport Layer Error Detect CSR */ #define RIO_EM_LTL_ERR_EN 0x00c /* Logical/Transport Layer Error Enable CSR */ #define REM_LTL_ERR_ILLTRAN 0x08000000 /* Illegal Transaction decode */ @@ -278,15 +312,33 @@ #define RIO_EM_LTL_ADDR_CAP 0x014 /* Logical/Transport Layer Address Capture CSR */ #define RIO_EM_LTL_DEVID_CAP 0x018 /* Logical/Transport Layer Device ID Capture CSR */ #define RIO_EM_LTL_CTRL_CAP 0x01c /* Logical/Transport Layer Control Capture CSR */ +#define RIO_EM_LTL_DID32_CAP 0x020 /* Logical/Transport Layer Dev32 DestID Capture CSR */ +#define RIO_EM_LTL_SID32_CAP 0x024 /* Logical/Transport Layer Dev32 source ID Capture CSR */ #define RIO_EM_PW_TGT_DEVID 0x028 /* Port-write Target deviceID CSR */ +#define RIO_EM_PW_TGT_DEVID_D16M 0xff000000 /* Port-write Target DID16 MSB */ +#define RIO_EM_PW_TGT_DEVID_D8 0x00ff0000 /* Port-write Target DID16 LSB or DID8 */ +#define RIO_EM_PW_TGT_DEVID_DEV16 0x00008000 /* Port-write Target DID16 LSB or DID8 */ +#define RIO_EM_PW_TGT_DEVID_DEV32 0x00004000 /* Port-write Target DID16 LSB or DID8 */ #define RIO_EM_PKT_TTL 0x02c /* Packet Time-to-live CSR */ +#define RIO_EM_PKT_TTL_VAL 0xffff0000 /* Packet Time-to-live value */ +#define RIO_EM_PW_TGT32_DEVID 0x030 /* Port-write Dev32 Target deviceID CSR */ +#define RIO_EM_PW_TX_CTRL 0x034 /* Port-write Transmission Control CSR */ +#define RIO_EM_PW_TX_CTRL_PW_DIS 0x00000001 /* Port-write Transmission Disable bit */ /* Per-Port EM Registers */ #define RIO_EM_PN_ERR_DETECT(x) (0x040 + x*0x40) /* Port N Error Detect CSR */ #define REM_PED_IMPL_SPEC 0x80000000 +#define REM_PED_LINK_OK2U 0x40000000 /* Link OK to Uninit transition */ +#define REM_PED_LINK_UPDA 0x20000000 /* Link Uninit Packet Discard Active */ +#define REM_PED_LINK_U2OK 0x10000000 /* Link Uninit to OK transition */ #define REM_PED_LINK_TO 0x00000001 + #define RIO_EM_PN_ERRRATE_EN(x) (0x044 + x*0x40) /* Port N Error Rate Enable CSR */ +#define RIO_EM_PN_ERRRATE_EN_OK2U 0x40000000 /* Enable notification for OK2U */ +#define RIO_EM_PN_ERRRATE_EN_UPDA 0x20000000 /* Enable notification for UPDA */ +#define RIO_EM_PN_ERRRATE_EN_U2OK 0x10000000 /* Enable notification for U2OK */ + #define RIO_EM_PN_ATTRIB_CAP(x) (0x048 + x*0x40) /* Port N Attributes Capture CSR */ #define RIO_EM_PN_PKT_CAP_0(x) (0x04c + x*0x40) /* Port N Packet/Control Symbol Capture 0 CSR */ #define RIO_EM_PN_PKT_CAP_1(x) (0x050 + x*0x40) /* Port N Packet Capture 1 CSR */ @@ -294,5 +346,50 @@ #define RIO_EM_PN_PKT_CAP_3(x) (0x058 + x*0x40) /* Port N Packet Capture 3 CSR */ #define RIO_EM_PN_ERRRATE(x) (0x068 + x*0x40) /* Port N Error Rate CSR */ #define RIO_EM_PN_ERRRATE_TR(x) (0x06c + x*0x40) /* Port N Error Rate Threshold CSR */ +#define RIO_EM_PN_LINK_UDT(x) (0x070 + x*0x40) /* Port N Link Uninit Discard Timer CSR */ +#define RIO_EM_PN_LINK_UDT_TO 0xffffff00 /* Link Uninit Timeout value */ + +/* + * Switch Routing Table Register Block ID=0x000E (RapidIO 3.0+, part 3) + * Register offsets are defined from beginning of the block. + */ + +/* Broadcast Routing Table Control CSR */ +#define RIO_BC_RT_CTL_CSR 0x020 +#define RIO_RT_CTL_THREE_LVL 0x80000000 +#define RIO_RT_CTL_DEV32_RT_CTRL 0x40000000 +#define RIO_RT_CTL_MC_MASK_SZ 0x03000000 /* 3.0+ Part 11: Multicast */ + +/* Broadcast Level 0 Info CSR */ +#define RIO_BC_RT_LVL0_INFO_CSR 0x030 +#define RIO_RT_L0I_NUM_GR 0xff000000 +#define RIO_RT_L0I_GR_PTR 0x00fffc00 + +/* Broadcast Level 1 Info CSR */ +#define RIO_BC_RT_LVL1_INFO_CSR 0x034 +#define RIO_RT_L1I_NUM_GR 0xff000000 +#define RIO_RT_L1I_GR_PTR 0x00fffc00 + +/* Broadcast Level 2 Info CSR */ +#define RIO_BC_RT_LVL2_INFO_CSR 0x038 +#define RIO_RT_L2I_NUM_GR 0xff000000 +#define RIO_RT_L2I_GR_PTR 0x00fffc00 + +/* Per-Port Routing Table registers. + * Register fields defined in the broadcast section above are + * applicable to the corresponding registers below. + */ +#define RIO_SPx_RT_CTL_CSR(x) (0x040 + (0x20 * x)) +#define RIO_SPx_RT_LVL0_INFO_CSR(x) (0x50 + (0x20 * x)) +#define RIO_SPx_RT_LVL1_INFO_CSR(x) (0x54 + (0x20 * x)) +#define RIO_SPx_RT_LVL2_INFO_CSR(x) (0x58 + (0x20 * x)) + +/* Register Formats for Routing Table Group entry. + * Register offsets are calculated using GR_PTR field in the corresponding + * table Level_N and group/entry numbers (see RapidIO 3.0+ Part 3). + */ +#define RIO_RT_Ln_ENTRY_IMPL_DEF 0xf0000000 +#define RIO_RT_Ln_ENTRY_RTE_VAL 0x000003ff +#define RIO_RT_ENTRY_DROP_PKT 0x300 #endif /* LINUX_RIO_REGS_H */