From 18f0211c9a104b6f40ab92f644a95d7f3028515c Mon Sep 17 00:00:00 2001 From: Christophe Leroy Date: Sat, 6 Mar 2021 18:09:30 +0000 Subject: [PATCH] tty: serial: ucc_uart: replace qe_io{read,write}* wrappers by generic io{read,write}* Commit 6ac9b61786cc ("soc: fsl: qe: introduce qe_io{read,write}* wrappers") added specific I/O accessors for qe because at that time ioread/iowrite functions were sub-optimal on powerpc/32 compared to the architecture specific in_/out_ IO accessors. But as ioread/iowrite accessors are now equivalent since commit 894fa235eb4c ("powerpc: inline iomap accessors"), use them in order to allow removal of the qe specific ones. Signed-off-by: Christophe Leroy Acked-by: Greg Kroah-Hartman Signed-off-by: Li Yang --- drivers/tty/serial/ucc_uart.c | 124 +++++++++++++++++----------------- 1 file changed, 62 insertions(+), 62 deletions(-) diff --git a/drivers/tty/serial/ucc_uart.c b/drivers/tty/serial/ucc_uart.c index d6a8604157ab..f81261cb52b8 100644 --- a/drivers/tty/serial/ucc_uart.c +++ b/drivers/tty/serial/ucc_uart.c @@ -261,11 +261,11 @@ static unsigned int qe_uart_tx_empty(struct uart_port *port) struct qe_bd *bdp = qe_port->tx_bd_base; while (1) { - if (qe_ioread16be(&bdp->status) & BD_SC_READY) + if (ioread16be(&bdp->status) & BD_SC_READY) /* This BD is not done, so return "not done" */ return 0; - if (qe_ioread16be(&bdp->status) & BD_SC_WRAP) + if (ioread16be(&bdp->status) & BD_SC_WRAP) /* * This BD is done and it's the last one, so return * "done" @@ -344,10 +344,10 @@ static int qe_uart_tx_pump(struct uart_qe_port *qe_port) p = qe2cpu_addr(be32_to_cpu(bdp->buf), qe_port); *p++ = port->x_char; - qe_iowrite16be(1, &bdp->length); + iowrite16be(1, &bdp->length); qe_setbits_be16(&bdp->status, BD_SC_READY); /* Get next BD. */ - if (qe_ioread16be(&bdp->status) & BD_SC_WRAP) + if (ioread16be(&bdp->status) & BD_SC_WRAP) bdp = qe_port->tx_bd_base; else bdp++; @@ -366,7 +366,7 @@ static int qe_uart_tx_pump(struct uart_qe_port *qe_port) /* Pick next descriptor and fill from buffer */ bdp = qe_port->tx_cur; - while (!(qe_ioread16be(&bdp->status) & BD_SC_READY) && + while (!(ioread16be(&bdp->status) & BD_SC_READY) && (xmit->tail != xmit->head)) { count = 0; p = qe2cpu_addr(be32_to_cpu(bdp->buf), qe_port); @@ -379,11 +379,11 @@ static int qe_uart_tx_pump(struct uart_qe_port *qe_port) break; } - qe_iowrite16be(count, &bdp->length); + iowrite16be(count, &bdp->length); qe_setbits_be16(&bdp->status, BD_SC_READY); /* Get next BD. */ - if (qe_ioread16be(&bdp->status) & BD_SC_WRAP) + if (ioread16be(&bdp->status) & BD_SC_WRAP) bdp = qe_port->tx_bd_base; else bdp++; @@ -416,7 +416,7 @@ static void qe_uart_start_tx(struct uart_port *port) container_of(port, struct uart_qe_port, port); /* If we currently are transmitting, then just return */ - if (qe_ioread16be(&qe_port->uccp->uccm) & UCC_UART_UCCE_TX) + if (ioread16be(&qe_port->uccp->uccm) & UCC_UART_UCCE_TX) return; /* Otherwise, pump the port and start transmission */ @@ -471,14 +471,14 @@ static void qe_uart_int_rx(struct uart_qe_port *qe_port) */ bdp = qe_port->rx_cur; while (1) { - status = qe_ioread16be(&bdp->status); + status = ioread16be(&bdp->status); /* If this one is empty, then we assume we've read them all */ if (status & BD_SC_EMPTY) break; /* get number of characters, and check space in RX buffer */ - i = qe_ioread16be(&bdp->length); + i = ioread16be(&bdp->length); /* If we don't have enough room in RX buffer for the entire BD, * then we try later, which will be the next RX interrupt. @@ -512,7 +512,7 @@ error_return: qe_clrsetbits_be16(&bdp->status, BD_SC_BR | BD_SC_FR | BD_SC_PR | BD_SC_OV | BD_SC_ID, BD_SC_EMPTY); - if (qe_ioread16be(&bdp->status) & BD_SC_WRAP) + if (ioread16be(&bdp->status) & BD_SC_WRAP) bdp = qe_port->rx_bd_base; else bdp++; @@ -569,8 +569,8 @@ static irqreturn_t qe_uart_int(int irq, void *data) u16 events; /* Clear the interrupts */ - events = qe_ioread16be(&uccp->ucce); - qe_iowrite16be(events, &uccp->ucce); + events = ioread16be(&uccp->ucce); + iowrite16be(events, &uccp->ucce); if (events & UCC_UART_UCCE_BRKE) uart_handle_break(&qe_port->port); @@ -601,17 +601,17 @@ static void qe_uart_initbd(struct uart_qe_port *qe_port) bdp = qe_port->rx_bd_base; qe_port->rx_cur = qe_port->rx_bd_base; for (i = 0; i < (qe_port->rx_nrfifos - 1); i++) { - qe_iowrite16be(BD_SC_EMPTY | BD_SC_INTRPT, &bdp->status); - qe_iowrite32be(cpu2qe_addr(bd_virt, qe_port), &bdp->buf); - qe_iowrite16be(0, &bdp->length); + iowrite16be(BD_SC_EMPTY | BD_SC_INTRPT, &bdp->status); + iowrite32be(cpu2qe_addr(bd_virt, qe_port), &bdp->buf); + iowrite16be(0, &bdp->length); bd_virt += qe_port->rx_fifosize; bdp++; } /* */ - qe_iowrite16be(BD_SC_WRAP | BD_SC_EMPTY | BD_SC_INTRPT, &bdp->status); - qe_iowrite32be(cpu2qe_addr(bd_virt, qe_port), &bdp->buf); - qe_iowrite16be(0, &bdp->length); + iowrite16be(BD_SC_WRAP | BD_SC_EMPTY | BD_SC_INTRPT, &bdp->status); + iowrite32be(cpu2qe_addr(bd_virt, qe_port), &bdp->buf); + iowrite16be(0, &bdp->length); /* Set the physical address of the host memory * buffers in the buffer descriptors, and the @@ -622,9 +622,9 @@ static void qe_uart_initbd(struct uart_qe_port *qe_port) qe_port->tx_cur = qe_port->tx_bd_base; bdp = qe_port->tx_bd_base; for (i = 0; i < (qe_port->tx_nrfifos - 1); i++) { - qe_iowrite16be(BD_SC_INTRPT, &bdp->status); - qe_iowrite32be(cpu2qe_addr(bd_virt, qe_port), &bdp->buf); - qe_iowrite16be(0, &bdp->length); + iowrite16be(BD_SC_INTRPT, &bdp->status); + iowrite32be(cpu2qe_addr(bd_virt, qe_port), &bdp->buf); + iowrite16be(0, &bdp->length); bd_virt += qe_port->tx_fifosize; bdp++; } @@ -634,9 +634,9 @@ static void qe_uart_initbd(struct uart_qe_port *qe_port) qe_setbits_be16(&qe_port->tx_cur->status, BD_SC_P); #endif - qe_iowrite16be(BD_SC_WRAP | BD_SC_INTRPT, &bdp->status); - qe_iowrite32be(cpu2qe_addr(bd_virt, qe_port), &bdp->buf); - qe_iowrite16be(0, &bdp->length); + iowrite16be(BD_SC_WRAP | BD_SC_INTRPT, &bdp->status); + iowrite32be(cpu2qe_addr(bd_virt, qe_port), &bdp->buf); + iowrite16be(0, &bdp->length); } /* @@ -658,21 +658,21 @@ static void qe_uart_init_ucc(struct uart_qe_port *qe_port) ucc_slow_disable(qe_port->us_private, COMM_DIR_RX_AND_TX); /* Program the UCC UART parameter RAM */ - qe_iowrite8(UCC_BMR_GBL | UCC_BMR_BO_BE, &uccup->common.rbmr); - qe_iowrite8(UCC_BMR_GBL | UCC_BMR_BO_BE, &uccup->common.tbmr); - qe_iowrite16be(qe_port->rx_fifosize, &uccup->common.mrblr); - qe_iowrite16be(0x10, &uccup->maxidl); - qe_iowrite16be(1, &uccup->brkcr); - qe_iowrite16be(0, &uccup->parec); - qe_iowrite16be(0, &uccup->frmec); - qe_iowrite16be(0, &uccup->nosec); - qe_iowrite16be(0, &uccup->brkec); - qe_iowrite16be(0, &uccup->uaddr[0]); - qe_iowrite16be(0, &uccup->uaddr[1]); - qe_iowrite16be(0, &uccup->toseq); + iowrite8(UCC_BMR_GBL | UCC_BMR_BO_BE, &uccup->common.rbmr); + iowrite8(UCC_BMR_GBL | UCC_BMR_BO_BE, &uccup->common.tbmr); + iowrite16be(qe_port->rx_fifosize, &uccup->common.mrblr); + iowrite16be(0x10, &uccup->maxidl); + iowrite16be(1, &uccup->brkcr); + iowrite16be(0, &uccup->parec); + iowrite16be(0, &uccup->frmec); + iowrite16be(0, &uccup->nosec); + iowrite16be(0, &uccup->brkec); + iowrite16be(0, &uccup->uaddr[0]); + iowrite16be(0, &uccup->uaddr[1]); + iowrite16be(0, &uccup->toseq); for (i = 0; i < 8; i++) - qe_iowrite16be(0xC000, &uccup->cchars[i]); - qe_iowrite16be(0xc0ff, &uccup->rccm); + iowrite16be(0xC000, &uccup->cchars[i]); + iowrite16be(0xc0ff, &uccup->rccm); /* Configure the GUMR registers for UART */ if (soft_uart) { @@ -702,30 +702,30 @@ static void qe_uart_init_ucc(struct uart_qe_port *qe_port) #endif /* Disable rx interrupts and clear all pending events. */ - qe_iowrite16be(0, &uccp->uccm); - qe_iowrite16be(0xffff, &uccp->ucce); - qe_iowrite16be(0x7e7e, &uccp->udsr); + iowrite16be(0, &uccp->uccm); + iowrite16be(0xffff, &uccp->ucce); + iowrite16be(0x7e7e, &uccp->udsr); /* Initialize UPSMR */ - qe_iowrite16be(0, &uccp->upsmr); + iowrite16be(0, &uccp->upsmr); if (soft_uart) { - qe_iowrite16be(0x30, &uccup->supsmr); - qe_iowrite16be(0, &uccup->res92); - qe_iowrite32be(0, &uccup->rx_state); - qe_iowrite32be(0, &uccup->rx_cnt); - qe_iowrite8(0, &uccup->rx_bitmark); - qe_iowrite8(10, &uccup->rx_length); - qe_iowrite32be(0x4000, &uccup->dump_ptr); - qe_iowrite8(0, &uccup->rx_temp_dlst_qe); - qe_iowrite32be(0, &uccup->rx_frame_rem); - qe_iowrite8(0, &uccup->rx_frame_rem_size); + iowrite16be(0x30, &uccup->supsmr); + iowrite16be(0, &uccup->res92); + iowrite32be(0, &uccup->rx_state); + iowrite32be(0, &uccup->rx_cnt); + iowrite8(0, &uccup->rx_bitmark); + iowrite8(10, &uccup->rx_length); + iowrite32be(0x4000, &uccup->dump_ptr); + iowrite8(0, &uccup->rx_temp_dlst_qe); + iowrite32be(0, &uccup->rx_frame_rem); + iowrite8(0, &uccup->rx_frame_rem_size); /* Soft-UART requires TX to be 1X */ - qe_iowrite8(UCC_UART_TX_STATE_UART | UCC_UART_TX_STATE_X1, + iowrite8(UCC_UART_TX_STATE_UART | UCC_UART_TX_STATE_X1, &uccup->tx_mode); - qe_iowrite16be(0, &uccup->tx_state); - qe_iowrite8(0, &uccup->resD4); - qe_iowrite16be(0, &uccup->resD5); + iowrite16be(0, &uccup->tx_state); + iowrite8(0, &uccup->resD4); + iowrite16be(0, &uccup->resD5); /* Set UART mode. * Enable receive and transmit. @@ -850,9 +850,9 @@ static void qe_uart_set_termios(struct uart_port *port, struct ucc_slow __iomem *uccp = qe_port->uccp; unsigned int baud; unsigned long flags; - u16 upsmr = qe_ioread16be(&uccp->upsmr); + u16 upsmr = ioread16be(&uccp->upsmr); struct ucc_uart_pram __iomem *uccup = qe_port->uccup; - u16 supsmr = qe_ioread16be(&uccup->supsmr); + u16 supsmr = ioread16be(&uccup->supsmr); u8 char_length = 2; /* 1 + CL + PEN + 1 + SL */ /* Character length programmed into the mode register is the @@ -950,10 +950,10 @@ static void qe_uart_set_termios(struct uart_port *port, /* Update the per-port timeout. */ uart_update_timeout(port, termios->c_cflag, baud); - qe_iowrite16be(upsmr, &uccp->upsmr); + iowrite16be(upsmr, &uccp->upsmr); if (soft_uart) { - qe_iowrite16be(supsmr, &uccup->supsmr); - qe_iowrite8(char_length, &uccup->rx_length); + iowrite16be(supsmr, &uccup->supsmr); + iowrite8(char_length, &uccup->rx_length); /* Soft-UART requires a 1X multiplier for TX */ qe_setbrg(qe_port->us_info.rx_clock, baud, 16);