korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-11-14 15:54:15 +08:00
Code Issues Packages Projects Releases Wiki Activity

Merge git://www.linux-watchdog.org/linux-watchdog

Browse Source 
Pull watchdog updates from Wim Van Sebroeck:
 - new driver for bcm281xx watchdog device
 - new driver for gpio based watchdog devices
 - remove DEFINE_PCI_DEVICE_TABLE macro for watchdog device drivers
 - conversion of davinci_wdt and mpc8xxx_wdt to watchdog core
 - improvements on davinci_wdt, at91/dt, at91sam9_wdt and s3c2410_wdt
 - Auto-detect IO address and expand supported chips on w836* super-I/O
   chipsets
 - core: Make dt "timeout-sec" property work on drivers w/out min/max
 - fix Kconfig dependencies
 - sirf: Remove redundant of_match_ptr helper
 - mach-moxart: add restart handler
 - hpwdt patch to display better panic information
 - imx2_wdt: disable watchdog timer during low power mode

* git://www.linux-watchdog.org/linux-watchdog: (31 commits)
  watchdog: w83627hf_wdt: Reset watchdog trigger during initialization
  watchdog: w83627hf: Add support for W83697HF and W83697UG
  watchdog: w83627hf: Auto-detect IO address and supported chips
  watchdog: at91sam9_wdt: increase security margin on watchdog counter reset
  watchdog: at91sam9_wdt: avoid spurious watchdog reset during init
  watchdog: at91sam9_wdt: fix secs_to_ticks
  ARM: at91/dt: add watchdog properties to kizbox board
  ARM: at91/dt: add sam9 watchdog default options to SoCs
  watchdog: at91sam9_wdt: update device tree doc
  watchdog: at91sam9_wdt: better watchdog support
  watchdog: sp805_wdt depends also on ARM64
  watchdog: mach-moxart: add restart handler
  watchdog: mpc8xxx_wdt convert to watchdog core
  watchdog: sirf: Remove redundant of_match_ptr helper
  watchdog: hpwdt patch to display informative string
  watchdog: dw_wdt: remove build dependencies
  watchdog: imx2_wdt: disable watchdog timer during low power mode
  watchdog: s3c2410_wdt: Report when the watchdog reset the system
  watchdog: s3c2410_wdt: use syscon regmap interface to configure pmu register
  watchdog: s3c2410_wdt: Handle rounding a little better for timeout
  ...
This commit is contained in:
Linus Torvalds 2014-01-29 19:57:43 -08:00
commit 17c7f85460
35 changed files with 1612 additions and 372 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

30
Documentation/devicetree/bindings/watchdog/atmel-wdt.txt
View File

@ -9,11 +9,37 @@ Required properties:
Optional properties:
- timeout-sec: contains the watchdog timeout in seconds.
- interrupts : Should contain WDT interrupt.
- atmel,max-heartbeat-sec : Should contain the maximum heartbeat value in
seconds. This value should be less or equal to 16. It is used to
compute the WDV field.
- atmel,min-heartbeat-sec : Should contain the minimum heartbeat value in
seconds. This value must be smaller than the max-heartbeat-sec value.
It is used to compute the WDD field.
- atmel,watchdog-type : Should be "hardware" or "software". Hardware watchdog
use the at91 watchdog reset. Software watchdog use the watchdog
interrupt to trigger a software reset.
- atmel,reset-type : Should be "proc" or "all".
"all" : assert peripherals and processor reset signals
"proc" : assert the processor reset signal
This is valid only when using "hardware" watchdog.
- atmel,disable : Should be present if you want to disable the watchdog.
- atmel,idle-halt : Should be present if you want to stop the watchdog when
entering idle state.
- atmel,dbg-halt : Should be present if you want to stop the watchdog when
entering debug state.
Example:
watchdog@fffffd40 {
compatible = "atmel,at91sam9260-wdt";
reg = <0xfffffd40 0x10>;
timeout-sec = <10>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
timeout-sec = <15>;
atmel,watchdog-type = "hardware";
atmel,reset-type = "all";
atmel,dbg-halt;
atmel,idle-halt;
atmel,max-heartbeat-sec = <16>;
atmel,min-heartbeat-sec = <0>;
status = "okay";
};

16
Documentation/devicetree/bindings/watchdog/davinci-wdt.txt
View File

@ -1,12 +1,24 @@
DaVinci Watchdog Timer (WDT) Controller
Texas Instruments DaVinci/Keystone Watchdog Timer (WDT) Controller
Required properties:
- compatible : Should be "ti,davinci-wdt"
- compatible : Should be "ti,davinci-wdt", "ti,keystone-wdt"
- reg : Should contain WDT registers location and length
Optional properties:
- timeout-sec : Contains the watchdog timeout in seconds
- clocks : the clock feeding the watchdog timer.
Needed if platform uses clocks.
See clock-bindings.txt
Documentation:
Davinci DM646x - http://www.ti.com/lit/ug/spruer5b/spruer5b.pdf
Keystone - http://www.ti.com/lit/ug/sprugv5a/sprugv5a.pdf
Examples:
wdt: wdt@2320000 {
compatible = "ti,davinci-wdt";
reg = <0x02320000 0x80>;
timeout-sec = <30>;
clocks = <&clkwdtimer0>;
};

23
Documentation/devicetree/bindings/watchdog/gpio-wdt.txt Normal file
View File

@ -0,0 +1,23 @@
* GPIO-controlled Watchdog
Required Properties:
- compatible: Should contain "linux,wdt-gpio".
- gpios: From common gpio binding; gpio connection to WDT reset pin.
- hw_algo: The algorithm used by the driver. Should be one of the
following values:
- toggle: Either a high-to-low or a low-to-high transition clears
the WDT counter. The watchdog timer is disabled when GPIO is
left floating or connected to a three-state buffer.
- level: Low or high level starts counting WDT timeout,
the opposite level disables the WDT. Active level is determined
by the GPIO flags.
- hw_margin_ms: Maximum time to reset watchdog circuit (milliseconds).
Example:
watchdog: watchdog {
/* ADM706 */
compatible = "linux,wdt-gpio";
gpios = <&gpio3 9 GPIO_ACTIVE_LOW>;
hw_algo = "toggle";
hw_margin_ms = <1600>;
};

21
Documentation/devicetree/bindings/watchdog/samsung-wdt.txt
View File

@ -5,10 +5,29 @@ after a preset amount of time during which the WDT reset event has not
occurred.
Required properties:
- compatible : should be "samsung,s3c2410-wdt"
- compatible : should be one among the following
(a) "samsung,s3c2410-wdt" for Exynos4 and previous SoCs
(b) "samsung,exynos5250-wdt" for Exynos5250
(c) "samsung,exynos5420-wdt" for Exynos5420
- reg : base physical address of the controller and length of memory mapped
region.
- interrupts : interrupt number to the cpu.
- samsung,syscon-phandle : reference to syscon node (This property required only
in case of compatible being "samsung,exynos5250-wdt" or "samsung,exynos5420-wdt".
In case of Exynos5250 and 5420 this property points to syscon node holding the PMU
base address)
Optional properties:
- timeout-sec : contains the watchdog timeout in seconds.
Example:
watchdog@101D0000 {
compatible = "samsung,exynos5250-wdt";
reg = <0x101D0000 0x100>;
interrupts = <0 42 0>;
clocks = <&clock 336>;
clock-names = "watchdog";
samsung,syscon-phandle = <&pmu_syscon>;
};

5
arch/arm/boot/dts/at91sam9260.dtsi
View File

@ -648,6 +648,11 @@
watchdog@fffffd40 {
compatible = "atmel,at91sam9260-wdt";
reg = <0xfffffd40 0x10>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
atmel,watchdog-type = "hardware";
atmel,reset-type = "all";
atmel,dbg-halt;
atmel,idle-halt;
status = "disabled";
};
};

5
arch/arm/boot/dts/at91sam9263.dtsi
View File

@ -552,6 +552,11 @@
watchdog@fffffd40 {
compatible = "atmel,at91sam9260-wdt";
reg = <0xfffffd40 0x10>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
atmel,watchdog-type = "hardware";
atmel,reset-type = "all";
atmel,dbg-halt;
atmel,idle-halt;
status = "disabled";
};

5
arch/arm/boot/dts/at91sam9g45.dtsi
View File

@ -706,6 +706,11 @@
watchdog@fffffd40 {
compatible = "atmel,at91sam9260-wdt";
reg = <0xfffffd40 0x10>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
atmel,watchdog-type = "hardware";
atmel,reset-type = "all";
atmel,dbg-halt;
atmel,idle-halt;
status = "disabled";
};

5
arch/arm/boot/dts/at91sam9n12.dtsi
View File

@ -541,6 +541,11 @@
watchdog@fffffe40 {
compatible = "atmel,at91sam9260-wdt";
reg = <0xfffffe40 0x10>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
atmel,watchdog-type = "hardware";
atmel,reset-type = "all";
atmel,dbg-halt;
atmel,idle-halt;
status = "disabled";
};

5
arch/arm/boot/dts/at91sam9x5.dtsi
View File

@ -754,6 +754,11 @@
watchdog@fffffe40 {
compatible = "atmel,at91sam9260-wdt";
reg = <0xfffffe40 0x10>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
atmel,watchdog-type = "hardware";
atmel,reset-type = "all";
atmel,dbg-halt;
atmel,idle-halt;
status = "disabled";
};

6
arch/arm/boot/dts/kizbox.dts
View File

@ -53,6 +53,12 @@
status = "okay";
};
watchdog@fffffd40 {
timeout-sec = <15>;
atmel,max-heartbeat-sec = <16>;
atmel,min-heartbeat-sec = <0>;
status = "okay";
};
};
nand0: nand@40000000 {

5
arch/arm/boot/dts/sama5d3.dtsi
View File

@ -1092,6 +1092,11 @@
watchdog@fffffe40 {
compatible = "atmel,at91sam9260-wdt";
reg = <0xfffffe40 0x10>;
interrupts = <4 IRQ_TYPE_LEVEL_HIGH 7>;
atmel,watchdog-type = "hardware";
atmel,reset-type = "all";
atmel,dbg-halt;
atmel,idle-halt;
status = "disabled";
};

3
arch/arm/configs/bcm_defconfig
View File

@ -126,3 +126,6 @@ CONFIG_CRC7=y
CONFIG_XZ_DEC=y
CONFIG_AVERAGE=y
CONFIG_PINCTRL_CAPRI=y
CONFIG_WATCHDOG=y
CONFIG_BCM_KONA_WDT=y
CONFIG_BCM_KONA_WDT_DEBUG=y

59
drivers/watchdog/Kconfig
View File

@ -87,6 +87,14 @@ config DA9055_WATCHDOG
This driver can also be built as a module. If so, the module
will be called da9055_wdt.
config GPIO_WATCHDOG
tristate "Watchdog device controlled through GPIO-line"
depends on OF_GPIO
select WATCHDOG_CORE
help
If you say yes here you get support for watchdog device
controlled through GPIO-line.
config WM831X_WATCHDOG
tristate "WM831x watchdog"
depends on MFD_WM831X
@ -109,7 +117,7 @@ config WM8350_WATCHDOG
config ARM_SP805_WATCHDOG
tristate "ARM SP805 Watchdog"
depends on ARM && ARM_AMBA
depends on (ARM || ARM64) && ARM_AMBA
select WATCHDOG_CORE
help
ARM Primecell SP805 Watchdog timer. This will reboot your system when
@ -188,6 +196,7 @@ config S3C2410_WATCHDOG
tristate "S3C2410 Watchdog"
depends on HAVE_S3C2410_WATCHDOG
select WATCHDOG_CORE
select MFD_SYSCON if ARCH_EXYNOS5
help
Watchdog timer block in the Samsung SoCs. This will reboot
the system when the timer expires with the watchdog enabled.
@ -214,10 +223,9 @@ config SA1100_WATCHDOG
config DW_WATCHDOG
tristate "Synopsys DesignWare watchdog"
depends on ARM && HAVE_CLK
help
Say Y here if to include support for the Synopsys DesignWare
watchdog timer found in many ARM chips.
watchdog timer found in many chips.
To compile this driver as a module, choose M here: the
module will be called dw_wdt.
@ -270,10 +278,11 @@ config IOP_WATCHDOG
config DAVINCI_WATCHDOG
tristate "DaVinci watchdog"
depends on ARCH_DAVINCI
depends on ARCH_DAVINCI || ARCH_KEYSTONE
select WATCHDOG_CORE
help
Say Y here if to include support for the watchdog timer
in the DaVinci DM644x/DM646x processors.
in the DaVinci DM644x/DM646x or Keystone processors.
To compile this driver as a module, choose M here: the
module will be called davinci_wdt.
@ -883,13 +892,22 @@ config VIA_WDT
Most people will say N.
config W83627HF_WDT
tristate "W83627HF/W83627DHG Watchdog Timer"
tristate "Watchdog timer for W83627HF/W83627DHG and compatibles"
depends on X86
select WATCHDOG_CORE
---help---
This is the driver for the hardware watchdog on the W83627HF chipset
as used in Advantech PC-9578 and Tyan S2721-533 motherboards
(and likely others). The driver also supports the W83627DHG chip.
This is the driver for the hardware watchdog on the following
Super I/O chips.
W83627DHG/DHG-P/EHF/EHG/F/G/HF/S/SF/THF/UHG/UG
W83637HF
W83667HG/HG-B
W83687THF
W83697HF
W83697UG
NCT6775
NCT6776
NCT6779
This watchdog simply watches your kernel to make sure it doesn't
freeze, and if it does, it reboots your computer after a certain
amount of time.
@ -1139,6 +1157,28 @@ config BCM2835_WDT
To compile this driver as a loadable module, choose M here.
The module will be called bcm2835_wdt.
config BCM_KONA_WDT
tristate "BCM Kona Watchdog"
depends on ARCH_BCM
select WATCHDOG_CORE
help
Support for the watchdog timer on the following Broadcom BCM281xx
family, which includes BCM11130, BCM11140, BCM11351, BCM28145 and
BCM28155 variants.
Say 'Y' or 'M' here to enable the driver. The module will be called
bcm_kona_wdt.
config BCM_KONA_WDT_DEBUG
bool "DEBUGFS support for BCM Kona Watchdog"
depends on BCM_KONA_WDT
help
If enabled, adds /sys/kernel/debug/bcm_kona_wdt/info which provides
access to the driver's internal data structures as well as watchdog
timer hardware registres.
If in doubt, say 'N'.
config LANTIQ_WDT
tristate "Lantiq SoC watchdog"
depends on LANTIQ
@ -1171,6 +1211,7 @@ config MPC5200_WDT
config 8xxx_WDT
tristate "MPC8xxx Platform Watchdog Timer"
depends on PPC_8xx || PPC_83xx || PPC_86xx
select WATCHDOG_CORE
help
This driver is for a SoC level watchdog that exists on some
Freescale PowerPC processors. So far this driver supports:

2
drivers/watchdog/Makefile
View File

@ -57,6 +57,7 @@ obj-$(CONFIG_RETU_WATCHDOG) += retu_wdt.o
obj-$(CONFIG_BCM2835_WDT) += bcm2835_wdt.o
obj-$(CONFIG_MOXART_WDT) += moxart_wdt.o
obj-$(CONFIG_SIRFSOC_WATCHDOG) += sirfsoc_wdt.o
obj-$(CONFIG_BCM_KONA_WDT) += bcm_kona_wdt.o
# AVR32 Architecture
obj-$(CONFIG_AT32AP700X_WDT) += at32ap700x_wdt.o
@ -171,6 +172,7 @@ obj-$(CONFIG_XEN_WDT) += xen_wdt.o
# Architecture Independent
obj-$(CONFIG_DA9052_WATCHDOG) += da9052_wdt.o
obj-$(CONFIG_DA9055_WATCHDOG) += da9055_wdt.o
obj-$(CONFIG_GPIO_WATCHDOG) += gpio_wdt.o
obj-$(CONFIG_WM831X_WATCHDOG) += wm831x_wdt.o
obj-$(CONFIG_WM8350_WATCHDOG) += wm8350_wdt.o
obj-$(CONFIG_MAX63XX_WATCHDOG) += max63xx_wdt.o

2
drivers/watchdog/alim1535_wdt.c
View File

@ -301,7 +301,7 @@ static int ali_notify_sys(struct notifier_block *this,
* want to register another driver on the same PCI id.
*/
static DEFINE_PCI_DEVICE_TABLE(ali_pci_tbl) __used = {
static const struct pci_device_id ali_pci_tbl[] __used = {
{ PCI_VENDOR_ID_AL, 0x1533, PCI_ANY_ID, PCI_ANY_ID,},
{ PCI_VENDOR_ID_AL, 0x1535, PCI_ANY_ID, PCI_ANY_ID,},
{ 0, },

2
drivers/watchdog/alim7101_wdt.c
View File

@ -414,7 +414,7 @@ err_out:
module_init(alim7101_wdt_init);
module_exit(alim7101_wdt_unload);
static DEFINE_PCI_DEVICE_TABLE(alim7101_pci_tbl) __used = {
static const struct pci_device_id alim7101_pci_tbl[] __used = {
{ PCI_DEVICE(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533) },
{ PCI_DEVICE(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M7101) },
{ }

320
drivers/watchdog/at91sam9_wdt.c
View File

@ -19,11 +19,13 @@
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/platform_device.h>
#include <linux/reboot.h>
#include <linux/types.h>
#include <linux/watchdog.h>
#include <linux/jiffies.h>
@ -31,22 +33,33 @@
#include <linux/bitops.h>
#include <linux/uaccess.h>
#include <linux/of.h>
#include <linux/of_irq.h>
#include "at91sam9_wdt.h"
#define DRV_NAME "AT91SAM9 Watchdog"
#define wdt_read(field) \
__raw_readl(at91wdt_private.base + field)
#define wdt_write(field, val) \
__raw_writel((val), at91wdt_private.base + field)
#define wdt_read(wdt, field) \
__raw_readl((wdt)->base + (field))
#define wdt_write(wtd, field, val) \
__raw_writel((val), (wdt)->base + (field))
/* AT91SAM9 watchdog runs a 12bit counter @ 256Hz,
* use this to convert a watchdog
* value from/to milliseconds.
*/
#define ms_to_ticks(t) (((t << 8) / 1000) - 1)
#define ticks_to_ms(t) (((t + 1) * 1000) >> 8)
#define ticks_to_hz_rounddown(t) ((((t) + 1) * HZ) >> 8)
#define ticks_to_hz_roundup(t) (((((t) + 1) * HZ) + 255) >> 8)
#define ticks_to_secs(t) (((t) + 1) >> 8)
#define secs_to_ticks(s) ((s) ? (((s) << 8) - 1) : 0)
#define WDT_MR_RESET 0x3FFF2FFF
/* Watchdog max counter value in ticks */
#define WDT_COUNTER_MAX_TICKS 0xFFF
/* Watchdog max delta/value in secs */
#define WDT_COUNTER_MAX_SECS ticks_to_secs(WDT_COUNTER_MAX_TICKS)
/* Hardware timeout in seconds */
#define WDT_HW_TIMEOUT 2
@ -66,23 +79,40 @@ module_param(nowayout, bool, 0);
MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started "
"(default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
static struct watchdog_device at91_wdt_dev;
static void at91_ping(unsigned long data);
static struct {
#define to_wdt(wdd) container_of(wdd, struct at91wdt, wdd)
struct at91wdt {
struct watchdog_device wdd;
void __iomem *base;
unsigned long next_heartbeat; /* the next_heartbeat for the timer */
struct timer_list timer; /* The timer that pings the watchdog */
} at91wdt_private;
u32 mr;
u32 mr_mask;
unsigned long heartbeat; /* WDT heartbeat in jiffies */
bool nowayout;
unsigned int irq;
};
/* ......................................................................... */
static irqreturn_t wdt_interrupt(int irq, void *dev_id)
{
struct at91wdt *wdt = (struct at91wdt *)dev_id;
if (wdt_read(wdt, AT91_WDT_SR)) {
pr_crit("at91sam9 WDT software reset\n");
emergency_restart();
pr_crit("Reboot didn't ?????\n");
}
return IRQ_HANDLED;
}
/*
* Reload the watchdog timer. (ie, pat the watchdog)
*/
static inline void at91_wdt_reset(void)
static inline void at91_wdt_reset(struct at91wdt *wdt)
{
wdt_write(AT91_WDT_CR, AT91_WDT_KEY | AT91_WDT_WDRSTT);
wdt_write(wdt, AT91_WDT_CR, AT91_WDT_KEY | AT91_WDT_WDRSTT);
}
/*
@ -90,26 +120,21 @@ static inline void at91_wdt_reset(void)
*/
static void at91_ping(unsigned long data)
{
if (time_before(jiffies, at91wdt_private.next_heartbeat) ||
(!watchdog_active(&at91_wdt_dev))) {
at91_wdt_reset();
mod_timer(&at91wdt_private.timer, jiffies + WDT_TIMEOUT);
} else
struct at91wdt *wdt = (struct at91wdt *)data;
if (time_before(jiffies, wdt->next_heartbeat) ||
!watchdog_active(&wdt->wdd)) {
at91_wdt_reset(wdt);
mod_timer(&wdt->timer, jiffies + wdt->heartbeat);
} else {
pr_crit("I will reset your machine !\n");
}
static int at91_wdt_ping(struct watchdog_device *wdd)
{
/* calculate when the next userspace timeout will be */
at91wdt_private.next_heartbeat = jiffies + wdd->timeout * HZ;
return 0;
}
}
static int at91_wdt_start(struct watchdog_device *wdd)
{
/* calculate the next userspace timeout and modify the timer */
at91_wdt_ping(wdd);
mod_timer(&at91wdt_private.timer, jiffies + WDT_TIMEOUT);
struct at91wdt *wdt = to_wdt(wdd);
/* calculate when the next userspace timeout will be */
wdt->next_heartbeat = jiffies + wdd->timeout * HZ;
return 0;
}
@ -122,39 +147,104 @@ static int at91_wdt_stop(struct watchdog_device *wdd)
static int at91_wdt_set_timeout(struct watchdog_device *wdd, unsigned int new_timeout)
{
wdd->timeout = new_timeout;
return 0;
return at91_wdt_start(wdd);
}
/*
* Set the watchdog time interval in 1/256Hz (write-once)
* Counter is 12 bit.
*/
static int at91_wdt_settimeout(unsigned int timeout)
static int at91_wdt_init(struct platform_device *pdev, struct at91wdt *wdt)
{
unsigned int reg;
unsigned int mr;
u32 tmp;
u32 delta;
u32 value;
int err;
u32 mask = wdt->mr_mask;
unsigned long min_heartbeat = 1;
unsigned long max_heartbeat;
struct device *dev = &pdev->dev;
/* Check if disabled */
mr = wdt_read(AT91_WDT_MR);
if (mr & AT91_WDT_WDDIS) {
pr_err("sorry, watchdog is disabled\n");
return -EIO;
tmp = wdt_read(wdt, AT91_WDT_MR);
if ((tmp & mask) != (wdt->mr & mask)) {
if (tmp == WDT_MR_RESET) {
wdt_write(wdt, AT91_WDT_MR, wdt->mr);
tmp = wdt_read(wdt, AT91_WDT_MR);
}
}
if (tmp & AT91_WDT_WDDIS) {
if (wdt->mr & AT91_WDT_WDDIS)
return 0;
dev_err(dev, "watchdog is disabled\n");
return -EINVAL;
}
value = tmp & AT91_WDT_WDV;
delta = (tmp & AT91_WDT_WDD) >> 16;
if (delta < value)
min_heartbeat = ticks_to_hz_roundup(value - delta);
max_heartbeat = ticks_to_hz_rounddown(value);
if (!max_heartbeat) {
dev_err(dev,
"heartbeat is too small for the system to handle it correctly\n");
return -EINVAL;
}
/*
* All counting occurs at SLOW_CLOCK / 128 = 256 Hz
*
* Since WDV is a 12-bit counter, the maximum period is
* 4096 / 256 = 16 seconds.
* Try to reset the watchdog counter 4 or 2 times more often than
* actually requested, to avoid spurious watchdog reset.
* If this is not possible because of the min_heartbeat value, reset
* it at the min_heartbeat period.
*/
reg = AT91_WDT_WDRSTEN /* causes watchdog reset */
/* | AT91_WDT_WDRPROC causes processor reset only */
| AT91_WDT_WDDBGHLT /* disabled in debug mode */
| AT91_WDT_WDD /* restart at any time */
| (timeout & AT91_WDT_WDV); /* timer value */
wdt_write(AT91_WDT_MR, reg);
if ((max_heartbeat / 4) >= min_heartbeat)
wdt->heartbeat = max_heartbeat / 4;
else if ((max_heartbeat / 2) >= min_heartbeat)
wdt->heartbeat = max_heartbeat / 2;
else
wdt->heartbeat = min_heartbeat;
if (max_heartbeat < min_heartbeat + 4)
dev_warn(dev,
"min heartbeat and max heartbeat might be too close for the system to handle it correctly\n");
if ((tmp & AT91_WDT_WDFIEN) && wdt->irq) {
err = request_irq(wdt->irq, wdt_interrupt,
IRQF_SHARED | IRQF_IRQPOLL,
pdev->name, wdt);
if (err)
return err;
}
if ((tmp & wdt->mr_mask) != (wdt->mr & wdt->mr_mask))
dev_warn(dev,
"watchdog already configured differently (mr = %x expecting %x)\n",
tmp & wdt->mr_mask, wdt->mr & wdt->mr_mask);
setup_timer(&wdt->timer, at91_ping, (unsigned long)wdt);
/*
* Use min_heartbeat the first time to avoid spurious watchdog reset:
* we don't know for how long the watchdog counter is running, and
* - resetting it right now might trigger a watchdog fault reset
* - waiting for heartbeat time might lead to a watchdog timeout
* reset
*/
mod_timer(&wdt->timer, jiffies + min_heartbeat);
/* Try to set timeout from device tree first */
if (watchdog_init_timeout(&wdt->wdd, 0, dev))
watchdog_init_timeout(&wdt->wdd, heartbeat, dev);
watchdog_set_nowayout(&wdt->wdd, wdt->nowayout);
err = watchdog_register_device(&wdt->wdd);
if (err)
goto out_stop_timer;
wdt->next_heartbeat = jiffies + wdt->wdd.timeout * HZ;
return 0;
out_stop_timer:
del_timer(&wdt->timer);
return err;
}
/* ......................................................................... */
@ -169,61 +259,123 @@ static const struct watchdog_ops at91_wdt_ops = {
.owner = THIS_MODULE,
.start = at91_wdt_start,
.stop = at91_wdt_stop,
.ping = at91_wdt_ping,
.set_timeout = at91_wdt_set_timeout,
};
static struct watchdog_device at91_wdt_dev = {
.info = &at91_wdt_info,
.ops = &at91_wdt_ops,
.timeout = WDT_HEARTBEAT,
.min_timeout = 1,
.max_timeout = 0xFFFF,
};
#if defined(CONFIG_OF)
static int of_at91wdt_init(struct device_node *np, struct at91wdt *wdt)
{
u32 min = 0;
u32 max = WDT_COUNTER_MAX_SECS;
const char *tmp;
/* Get the interrupts property */
wdt->irq = irq_of_parse_and_map(np, 0);
if (!wdt->irq)
dev_warn(wdt->wdd.parent, "failed to get IRQ from DT\n");
if (!of_property_read_u32_index(np, "atmel,max-heartbeat-sec", 0,
&max)) {
if (!max || max > WDT_COUNTER_MAX_SECS)
max = WDT_COUNTER_MAX_SECS;
if (!of_property_read_u32_index(np, "atmel,min-heartbeat-sec",
0, &min)) {
if (min >= max)
min = max - 1;
}
}
min = secs_to_ticks(min);
max = secs_to_ticks(max);
wdt->mr_mask = 0x3FFFFFFF;
wdt->mr = 0;
if (!of_property_read_string(np, "atmel,watchdog-type", &tmp) &&
!strcmp(tmp, "software")) {
wdt->mr |= AT91_WDT_WDFIEN;
wdt->mr_mask &= ~AT91_WDT_WDRPROC;
} else {
wdt->mr |= AT91_WDT_WDRSTEN;
}
if (!of_property_read_string(np, "atmel,reset-type", &tmp) &&
!strcmp(tmp, "proc"))
wdt->mr |= AT91_WDT_WDRPROC;
if (of_property_read_bool(np, "atmel,disable")) {
wdt->mr |= AT91_WDT_WDDIS;
wdt->mr_mask &= AT91_WDT_WDDIS;
}
if (of_property_read_bool(np, "atmel,idle-halt"))
wdt->mr |= AT91_WDT_WDIDLEHLT;
if (of_property_read_bool(np, "atmel,dbg-halt"))
wdt->mr |= AT91_WDT_WDDBGHLT;
wdt->mr |= max | ((max - min) << 16);
return 0;
}
#else
static inline int of_at91wdt_init(struct device_node *np, struct at91wdt *wdt)
{
return 0;
}
#endif
static int __init at91wdt_probe(struct platform_device *pdev)
{
struct resource *r;
int res;
int err;
struct at91wdt *wdt;
wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL);
if (!wdt)
return -ENOMEM;
wdt->mr = (WDT_HW_TIMEOUT * 256) | AT91_WDT_WDRSTEN | AT91_WDT_WDD |
AT91_WDT_WDDBGHLT | AT91_WDT_WDIDLEHLT;
wdt->mr_mask = 0x3FFFFFFF;
wdt->nowayout = nowayout;
wdt->wdd.parent = &pdev->dev;
wdt->wdd.info = &at91_wdt_info;
wdt->wdd.ops = &at91_wdt_ops;
wdt->wdd.timeout = WDT_HEARTBEAT;
wdt->wdd.min_timeout = 1;
wdt->wdd.max_timeout = 0xFFFF;
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!r)
return -ENODEV;
at91wdt_private.base = ioremap(r->start, resource_size(r));
if (!at91wdt_private.base) {
dev_err(&pdev->dev, "failed to map registers, aborting.\n");
return -ENOMEM;
wdt->base = devm_ioremap_resource(&pdev->dev, r);
if (IS_ERR(wdt->base))
return PTR_ERR(wdt->base);
if (pdev->dev.of_node) {
err = of_at91wdt_init(pdev->dev.of_node, wdt);
if (err)
return err;
}
at91_wdt_dev.parent = &pdev->dev;
watchdog_init_timeout(&at91_wdt_dev, heartbeat, &pdev->dev);
watchdog_set_nowayout(&at91_wdt_dev, nowayout);
err = at91_wdt_init(pdev, wdt);
if (err)
return err;
/* Set watchdog */
res = at91_wdt_settimeout(ms_to_ticks(WDT_HW_TIMEOUT * 1000));
if (res)
return res;
res = watchdog_register_device(&at91_wdt_dev);
if (res)
return res;
at91wdt_private.next_heartbeat = jiffies + at91_wdt_dev.timeout * HZ;
setup_timer(&at91wdt_private.timer, at91_ping, 0);
mod_timer(&at91wdt_private.timer, jiffies + WDT_TIMEOUT);
platform_set_drvdata(pdev, wdt);
pr_info("enabled (heartbeat=%d sec, nowayout=%d)\n",
at91_wdt_dev.timeout, nowayout);
wdt->wdd.timeout, wdt->nowayout);
return 0;
}
static int __exit at91wdt_remove(struct platform_device *pdev)
{
watchdog_unregister_device(&at91_wdt_dev);
struct at91wdt *wdt = platform_get_drvdata(pdev);
watchdog_unregister_device(&wdt->wdd);
pr_warn("I quit now, hardware will probably reboot!\n");
del_timer(&at91wdt_private.timer);
del_timer(&wdt->timer);
return 0;
}

368
drivers/watchdog/bcm_kona_wdt.c Normal file
View File

@ -0,0 +1,368 @@
/*
* Copyright (C) 2013 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation version 2.
*
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
* kind, whether express or implied; without even the implied warranty
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/debugfs.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of_address.h>
#include <linux/platform_device.h>
#include <linux/watchdog.h>
#define SECWDOG_CTRL_REG 0x00000000
#define SECWDOG_COUNT_REG 0x00000004
#define SECWDOG_RESERVED_MASK 0x1dffffff
#define SECWDOG_WD_LOAD_FLAG 0x10000000
#define SECWDOG_EN_MASK 0x08000000
#define SECWDOG_SRSTEN_MASK 0x04000000
#define SECWDOG_RES_MASK 0x00f00000
#define SECWDOG_COUNT_MASK 0x000fffff
#define SECWDOG_MAX_COUNT SECWDOG_COUNT_MASK
#define SECWDOG_CLKS_SHIFT 20
#define SECWDOG_MAX_RES 15
#define SECWDOG_DEFAULT_RESOLUTION 4
#define SECWDOG_MAX_TRY 1000
#define SECS_TO_TICKS(x, w) ((x) << (w)->resolution)
#define TICKS_TO_SECS(x, w) ((x) >> (w)->resolution)
#define BCM_KONA_WDT_NAME "bcm_kona_wdt"
struct bcm_kona_wdt {
void __iomem *base;
/*
* One watchdog tick is 1/(2^resolution) seconds. Resolution can take
* the values 0-15, meaning one tick can be 1s to 30.52us. Our default
* resolution of 4 means one tick is 62.5ms.
*
* The watchdog counter is 20 bits. Depending on resolution, the maximum
* counter value of 0xfffff expires after about 12 days (resolution 0)
* down to only 32s (resolution 15). The default resolution of 4 gives
* us a maximum of about 18 hours and 12 minutes before the watchdog
* times out.
*/
int resolution;
spinlock_t lock;
#ifdef CONFIG_BCM_KONA_WDT_DEBUG
unsigned long busy_count;
struct dentry *debugfs;
#endif
};
static int secure_register_read(struct bcm_kona_wdt *wdt, uint32_t offset)
{
uint32_t val;
unsigned count = 0;
/*
* If the WD_LOAD_FLAG is set, the watchdog counter field is being
* updated in hardware. Once the WD timer is updated in hardware, it
* gets cleared.
*/
do {
if (unlikely(count > 1))
udelay(5);
val = readl_relaxed(wdt->base + offset);
count++;
} while ((val & SECWDOG_WD_LOAD_FLAG) && count < SECWDOG_MAX_TRY);
#ifdef CONFIG_BCM_KONA_WDT_DEBUG
/* Remember the maximum number iterations due to WD_LOAD_FLAG */
if (count > wdt->busy_count)
wdt->busy_count = count;
#endif
/* This is the only place we return a negative value. */
if (val & SECWDOG_WD_LOAD_FLAG)
return -ETIMEDOUT;
/* We always mask out reserved bits. */
val &= SECWDOG_RESERVED_MASK;
return val;
}
#ifdef CONFIG_BCM_KONA_WDT_DEBUG
static int bcm_kona_wdt_dbg_show(struct seq_file *s, void *data)
{
int ctl_val, cur_val, ret;
unsigned long flags;
struct bcm_kona_wdt *wdt = s->private;
if (!wdt)
return seq_puts(s, "No device pointer\n");
spin_lock_irqsave(&wdt->lock, flags);
ctl_val = secure_register_read(wdt, SECWDOG_CTRL_REG);
cur_val = secure_register_read(wdt, SECWDOG_COUNT_REG);
spin_unlock_irqrestore(&wdt->lock, flags);
if (ctl_val < 0 || cur_val < 0) {
ret = seq_puts(s, "Error accessing hardware\n");
} else {
int ctl, cur, ctl_sec, cur_sec, res;
ctl = ctl_val & SECWDOG_COUNT_MASK;
res = (ctl_val & SECWDOG_RES_MASK) >> SECWDOG_CLKS_SHIFT;
cur = cur_val & SECWDOG_COUNT_MASK;
ctl_sec = TICKS_TO_SECS(ctl, wdt);
cur_sec = TICKS_TO_SECS(cur, wdt);
ret = seq_printf(s, "Resolution: %d / %d\n"
"Control: %d s / %d (%#x) ticks\n"
"Current: %d s / %d (%#x) ticks\n"
"Busy count: %lu\n", res,
wdt->resolution, ctl_sec, ctl, ctl, cur_sec,
cur, cur, wdt->busy_count);
}
return ret;
}
static int bcm_kona_dbg_open(struct inode *inode, struct file *file)
{
return single_open(file, bcm_kona_wdt_dbg_show, inode->i_private);
}
static const struct file_operations bcm_kona_dbg_operations = {
.open = bcm_kona_dbg_open,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
};
static void bcm_kona_wdt_debug_init(struct platform_device *pdev)
{
struct dentry *dir;
struct bcm_kona_wdt *wdt = platform_get_drvdata(pdev);
if (!wdt)
return;
wdt->debugfs = NULL;
dir = debugfs_create_dir(BCM_KONA_WDT_NAME, NULL);
if (IS_ERR_OR_NULL(dir))
return;
if (debugfs_create_file("info", S_IFREG | S_IRUGO, dir, wdt,
&bcm_kona_dbg_operations))
wdt->debugfs = dir;
else
debugfs_remove_recursive(dir);
}
static void bcm_kona_wdt_debug_exit(struct platform_device *pdev)
{
struct bcm_kona_wdt *wdt = platform_get_drvdata(pdev);
if (wdt && wdt->debugfs) {
debugfs_remove_recursive(wdt->debugfs);
wdt->debugfs = NULL;
}
}
#else
static void bcm_kona_wdt_debug_init(struct platform_device *pdev) {}
static void bcm_kona_wdt_debug_exit(struct platform_device *pdev) {}
#endif /* CONFIG_BCM_KONA_WDT_DEBUG */
static int bcm_kona_wdt_ctrl_reg_modify(struct bcm_kona_wdt *wdt,
unsigned mask, unsigned newval)
{
int val;
unsigned long flags;
int ret = 0;
spin_lock_irqsave(&wdt->lock, flags);
val = secure_register_read(wdt, SECWDOG_CTRL_REG);
if (val < 0) {
ret = val;
} else {
val &= ~mask;
val |= newval;
writel_relaxed(val, wdt->base + SECWDOG_CTRL_REG);
}
spin_unlock_irqrestore(&wdt->lock, flags);
return ret;
}
static int bcm_kona_wdt_set_resolution_reg(struct bcm_kona_wdt *wdt)
{
if (wdt->resolution > SECWDOG_MAX_RES)
return -EINVAL;
return bcm_kona_wdt_ctrl_reg_modify(wdt, SECWDOG_RES_MASK,
wdt->resolution << SECWDOG_CLKS_SHIFT);
}
static int bcm_kona_wdt_set_timeout_reg(struct watchdog_device *wdog,
unsigned watchdog_flags)
{
struct bcm_kona_wdt *wdt = watchdog_get_drvdata(wdog);
return bcm_kona_wdt_ctrl_reg_modify(wdt, SECWDOG_COUNT_MASK,
SECS_TO_TICKS(wdog->timeout, wdt) |
watchdog_flags);
}
static int bcm_kona_wdt_set_timeout(struct watchdog_device *wdog,
unsigned int t)
{
wdog->timeout = t;
return 0;
}
static unsigned int bcm_kona_wdt_get_timeleft(struct watchdog_device *wdog)
{
struct bcm_kona_wdt *wdt = watchdog_get_drvdata(wdog);
int val;
unsigned long flags;
spin_lock_irqsave(&wdt->lock, flags);
val = secure_register_read(wdt, SECWDOG_COUNT_REG);
spin_unlock_irqrestore(&wdt->lock, flags);
if (val < 0)
return val;
return TICKS_TO_SECS(val & SECWDOG_COUNT_MASK, wdt);
}
static int bcm_kona_wdt_start(struct watchdog_device *wdog)
{
return bcm_kona_wdt_set_timeout_reg(wdog,
SECWDOG_EN_MASK | SECWDOG_SRSTEN_MASK);
}
static int bcm_kona_wdt_stop(struct watchdog_device *wdog)
{
struct bcm_kona_wdt *wdt = watchdog_get_drvdata(wdog);
return bcm_kona_wdt_ctrl_reg_modify(wdt, SECWDOG_EN_MASK |
SECWDOG_SRSTEN_MASK, 0);
}
static struct watchdog_ops bcm_kona_wdt_ops = {
.owner = THIS_MODULE,
.start = bcm_kona_wdt_start,
.stop = bcm_kona_wdt_stop,
.set_timeout = bcm_kona_wdt_set_timeout,
.get_timeleft = bcm_kona_wdt_get_timeleft,
};
static struct watchdog_info bcm_kona_wdt_info = {
.options = WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE |
WDIOF_KEEPALIVEPING,
.identity = "Broadcom Kona Watchdog Timer",
};
static struct watchdog_device bcm_kona_wdt_wdd = {
.info = &bcm_kona_wdt_info,
.ops = &bcm_kona_wdt_ops,
.min_timeout = 1,
.max_timeout = SECWDOG_MAX_COUNT >> SECWDOG_DEFAULT_RESOLUTION,
.timeout = SECWDOG_MAX_COUNT >> SECWDOG_DEFAULT_RESOLUTION,
};
static void bcm_kona_wdt_shutdown(struct platform_device *pdev)
{
bcm_kona_wdt_stop(&bcm_kona_wdt_wdd);
}
static int bcm_kona_wdt_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct bcm_kona_wdt *wdt;
struct resource *res;
int ret;
wdt = devm_kzalloc(dev, sizeof(*wdt), GFP_KERNEL);
if (!wdt)
return -ENOMEM;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
wdt->base = devm_ioremap_resource(dev, res);
if (IS_ERR(wdt->base))
return -ENODEV;
wdt->resolution = SECWDOG_DEFAULT_RESOLUTION;
ret = bcm_kona_wdt_set_resolution_reg(wdt);
if (ret) {
dev_err(dev, "Failed to set resolution (error: %d)", ret);
return ret;
}
spin_lock_init(&wdt->lock);
platform_set_drvdata(pdev, wdt);
watchdog_set_drvdata(&bcm_kona_wdt_wdd, wdt);
ret = bcm_kona_wdt_set_timeout_reg(&bcm_kona_wdt_wdd, 0);
if (ret) {
dev_err(dev, "Failed set watchdog timeout");
return ret;
}
ret = watchdog_register_device(&bcm_kona_wdt_wdd);
if (ret) {
dev_err(dev, "Failed to register watchdog device");
return ret;
}
bcm_kona_wdt_debug_init(pdev);
dev_dbg(dev, "Broadcom Kona Watchdog Timer");
return 0;
}
static int bcm_kona_wdt_remove(struct platform_device *pdev)
{
bcm_kona_wdt_debug_exit(pdev);
bcm_kona_wdt_shutdown(pdev);
watchdog_unregister_device(&bcm_kona_wdt_wdd);
dev_dbg(&pdev->dev, "Watchdog driver disabled");
return 0;
}
static const struct of_device_id bcm_kona_wdt_of_match[] = {
{ .compatible = "brcm,kona-wdt", },
{},
};
MODULE_DEVICE_TABLE(of, bcm_kona_wdt_of_match);
static struct platform_driver bcm_kona_wdt_driver = {
.driver = {
.name = BCM_KONA_WDT_NAME,
.owner = THIS_MODULE,
.of_match_table = bcm_kona_wdt_of_match,
},
.probe = bcm_kona_wdt_probe,
.remove = bcm_kona_wdt_remove,
.shutdown = bcm_kona_wdt_shutdown,
};
module_platform_driver(bcm_kona_wdt_driver);
MODULE_ALIAS("platform:" BCM_KONA_WDT_NAME);
MODULE_AUTHOR("Markus Mayer <mmayer@broadcom.com>");
MODULE_DESCRIPTION("Broadcom Kona Watchdog Driver");
MODULE_LICENSE("GPL v2");

243
drivers/watchdog/davinci_wdt.c
View File

@ -3,7 +3,7 @@
*
* Watchdog driver for DaVinci DM644x/DM646x processors
*
* Copyright (C) 2006 Texas Instruments.
* Copyright (C) 2006-2013 Texas Instruments.
*
* 2007 (c) MontaVista Software, Inc. This file is licensed under
* the terms of the GNU General Public License version 2. This program
@ -15,18 +15,12 @@
#include <linux/moduleparam.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/fs.h>
#include <linux/miscdevice.h>
#include <linux/watchdog.h>
#include <linux/init.h>
#include <linux/bitops.h>
#include <linux/platform_device.h>
#include <linux/spinlock.h>
#include <linux/uaccess.h>
#include <linux/io.h>
#include <linux/device.h>
#include <linux/clk.h>
#include <linux/slab.h>
#include <linux/err.h>
#define MODULE_NAME "DAVINCI-WDT: "
@ -61,142 +55,103 @@
#define WDKEY_SEQ0 (0xa5c6 << 16)
#define WDKEY_SEQ1 (0xda7e << 16)
static int heartbeat = DEFAULT_HEARTBEAT;
static int heartbeat;
static DEFINE_SPINLOCK(io_lock);
static unsigned long wdt_status;
#define WDT_IN_USE 0
#define WDT_OK_TO_CLOSE 1
#define WDT_REGION_INITED 2
#define WDT_DEVICE_INITED 3
/*
* struct to hold data for each WDT device
* @base - base io address of WD device
* @clk - source clock of WDT
* @wdd - hold watchdog device as is in WDT core
*/
struct davinci_wdt_device {
void __iomem *base;
struct clk *clk;
struct watchdog_device wdd;
};
static void __iomem *wdt_base;
struct clk *wdt_clk;
static void wdt_service(void)
{
spin_lock(&io_lock);
/* put watchdog in service state */
iowrite32(WDKEY_SEQ0, wdt_base + WDTCR);
/* put watchdog in active state */
iowrite32(WDKEY_SEQ1, wdt_base + WDTCR);
spin_unlock(&io_lock);
}
static void wdt_enable(void)
static int davinci_wdt_start(struct watchdog_device *wdd)
{
u32 tgcr;
u32 timer_margin;
unsigned long wdt_freq;
struct davinci_wdt_device *davinci_wdt = watchdog_get_drvdata(wdd);
wdt_freq = clk_get_rate(wdt_clk);
spin_lock(&io_lock);
wdt_freq = clk_get_rate(davinci_wdt->clk);
/* disable, internal clock source */
iowrite32(0, wdt_base + TCR);
iowrite32(0, davinci_wdt->base + TCR);
/* reset timer, set mode to 64-bit watchdog, and unreset */
iowrite32(0, wdt_base + TGCR);
iowrite32(0, davinci_wdt->base + TGCR);
tgcr = TIMMODE_64BIT_WDOG | TIM12RS_UNRESET | TIM34RS_UNRESET;
iowrite32(tgcr, wdt_base + TGCR);
iowrite32(tgcr, davinci_wdt->base + TGCR);
/* clear counter regs */
iowrite32(0, wdt_base + TIM12);
iowrite32(0, wdt_base + TIM34);
iowrite32(0, davinci_wdt->base + TIM12);
iowrite32(0, davinci_wdt->base + TIM34);
/* set timeout period */
timer_margin = (((u64)heartbeat * wdt_freq) & 0xffffffff);
iowrite32(timer_margin, wdt_base + PRD12);
timer_margin = (((u64)heartbeat * wdt_freq) >> 32);
iowrite32(timer_margin, wdt_base + PRD34);
timer_margin = (((u64)wdd->timeout * wdt_freq) & 0xffffffff);
iowrite32(timer_margin, davinci_wdt->base + PRD12);
timer_margin = (((u64)wdd->timeout * wdt_freq) >> 32);
iowrite32(timer_margin, davinci_wdt->base + PRD34);
/* enable run continuously */
iowrite32(ENAMODE12_PERIODIC, wdt_base + TCR);
iowrite32(ENAMODE12_PERIODIC, davinci_wdt->base + TCR);
/* Once the WDT is in pre-active state write to
* TIM12, TIM34, PRD12, PRD34, TCR, TGCR, WDTCR are
* write protected (except for the WDKEY field)
*/
/* put watchdog in pre-active state */
iowrite32(WDKEY_SEQ0 | WDEN, wdt_base + WDTCR);
iowrite32(WDKEY_SEQ0 | WDEN, davinci_wdt->base + WDTCR);
/* put watchdog in active state */
iowrite32(WDKEY_SEQ1 | WDEN, wdt_base + WDTCR);
spin_unlock(&io_lock);
}
static int davinci_wdt_open(struct inode *inode, struct file *file)
{
if (test_and_set_bit(WDT_IN_USE, &wdt_status))
return -EBUSY;
wdt_enable();
return nonseekable_open(inode, file);
}
static ssize_t
davinci_wdt_write(struct file *file, const char *data, size_t len,
loff_t *ppos)
{
if (len)
wdt_service();
return len;
}
static const struct watchdog_info ident = {
.options = WDIOF_KEEPALIVEPING,
.identity = "DaVinci Watchdog",
};
static long davinci_wdt_ioctl(struct file *file,
unsigned int cmd, unsigned long arg)
{
int ret = -ENOTTY;
switch (cmd) {
case WDIOC_GETSUPPORT:
ret = copy_to_user((struct watchdog_info *)arg, &ident,
sizeof(ident)) ? -EFAULT : 0;
break;
case WDIOC_GETSTATUS:
case WDIOC_GETBOOTSTATUS:
ret = put_user(0, (int *)arg);
break;
case WDIOC_KEEPALIVE:
wdt_service();
ret = 0;
break;
case WDIOC_GETTIMEOUT:
ret = put_user(heartbeat, (int *)arg);
break;
}
return ret;
}
static int davinci_wdt_release(struct inode *inode, struct file *file)
{
wdt_service();
clear_bit(WDT_IN_USE, &wdt_status);
iowrite32(WDKEY_SEQ1 | WDEN, davinci_wdt->base + WDTCR);
return 0;
}
static const struct file_operations davinci_wdt_fops = {
.owner = THIS_MODULE,
.llseek = no_llseek,
.write = davinci_wdt_write,
.unlocked_ioctl = davinci_wdt_ioctl,
.open = davinci_wdt_open,
.release = davinci_wdt_release,
static int davinci_wdt_ping(struct watchdog_device *wdd)
{
struct davinci_wdt_device *davinci_wdt = watchdog_get_drvdata(wdd);
/* put watchdog in service state */
iowrite32(WDKEY_SEQ0, davinci_wdt->base + WDTCR);
/* put watchdog in active state */
iowrite32(WDKEY_SEQ1, davinci_wdt->base + WDTCR);
return 0;
}
static unsigned int davinci_wdt_get_timeleft(struct watchdog_device *wdd)
{
u64 timer_counter;
unsigned long freq;
u32 val;
struct davinci_wdt_device *davinci_wdt = watchdog_get_drvdata(wdd);
/* if timeout has occured then return 0 */
val = ioread32(davinci_wdt->base + WDTCR);
if (val & WDFLAG)
return 0;
freq = clk_get_rate(davinci_wdt->clk);
if (!freq)
return 0;
timer_counter = ioread32(davinci_wdt->base + TIM12);
timer_counter |= ((u64)ioread32(davinci_wdt->base + TIM34) << 32);
do_div(timer_counter, freq);
return wdd->timeout - timer_counter;
}
static const struct watchdog_info davinci_wdt_info = {
.options = WDIOF_KEEPALIVEPING,
.identity = "DaVinci/Keystone Watchdog",
};
static struct miscdevice davinci_wdt_miscdev = {
.minor = WATCHDOG_MINOR,
.name = "watchdog",
.fops = &davinci_wdt_fops,
static const struct watchdog_ops davinci_wdt_ops = {
.owner = THIS_MODULE,
.start = davinci_wdt_start,
.stop = davinci_wdt_ping,
.ping = davinci_wdt_ping,
.get_timeleft = davinci_wdt_get_timeleft,
};
static int davinci_wdt_probe(struct platform_device *pdev)
@ -204,37 +159,53 @@ static int davinci_wdt_probe(struct platform_device *pdev)
int ret = 0;
struct device *dev = &pdev->dev;
struct resource *wdt_mem;
struct watchdog_device *wdd;
struct davinci_wdt_device *davinci_wdt;
wdt_clk = devm_clk_get(dev, NULL);
if (WARN_ON(IS_ERR(wdt_clk)))
return PTR_ERR(wdt_clk);
davinci_wdt = devm_kzalloc(dev, sizeof(*davinci_wdt), GFP_KERNEL);
if (!davinci_wdt)
return -ENOMEM;
clk_prepare_enable(wdt_clk);
davinci_wdt->clk = devm_clk_get(dev, NULL);
if (WARN_ON(IS_ERR(davinci_wdt->clk)))
return PTR_ERR(davinci_wdt->clk);
if (heartbeat < 1 || heartbeat > MAX_HEARTBEAT)
heartbeat = DEFAULT_HEARTBEAT;
clk_prepare_enable(davinci_wdt->clk);
dev_info(dev, "heartbeat %d sec\n", heartbeat);
platform_set_drvdata(pdev, davinci_wdt);
wdd = &davinci_wdt->wdd;
wdd->info = &davinci_wdt_info;
wdd->ops = &davinci_wdt_ops;
wdd->min_timeout = 1;
wdd->max_timeout = MAX_HEARTBEAT;
wdd->timeout = DEFAULT_HEARTBEAT;
watchdog_init_timeout(wdd, heartbeat, dev);
dev_info(dev, "heartbeat %d sec\n", wdd->timeout);
watchdog_set_drvdata(wdd, davinci_wdt);
watchdog_set_nowayout(wdd, 1);
wdt_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
wdt_base = devm_ioremap_resource(dev, wdt_mem);
if (IS_ERR(wdt_base))
return PTR_ERR(wdt_base);
davinci_wdt->base = devm_ioremap_resource(dev, wdt_mem);
if (IS_ERR(davinci_wdt->base))
return PTR_ERR(davinci_wdt->base);
ret = misc_register(&davinci_wdt_miscdev);
if (ret < 0) {
dev_err(dev, "cannot register misc device\n");
} else {
set_bit(WDT_DEVICE_INITED, &wdt_status);
}
ret = watchdog_register_device(wdd);
if (ret < 0)
dev_err(dev, "cannot register watchdog device\n");
return ret;
}
static int davinci_wdt_remove(struct platform_device *pdev)
{
misc_deregister(&davinci_wdt_miscdev);
clk_disable_unprepare(wdt_clk);
struct davinci_wdt_device *davinci_wdt = platform_get_drvdata(pdev);
watchdog_unregister_device(&davinci_wdt->wdd);
clk_disable_unprepare(davinci_wdt->clk);
return 0;
}

2
drivers/watchdog/dw_wdt.c
View File

@ -8,7 +8,7 @@
* 2 of the License, or (at your option) any later version.
*
* This file implements a driver for the Synopsys DesignWare watchdog device
* in the many ARM subsystems. The watchdog has 16 different timeout periods
* in the many subsystems. The watchdog has 16 different timeout periods
* and these are a function of the input clock frequency.
*
* The DesignWare watchdog cannot be stopped once it has been started so we

254
drivers/watchdog/gpio_wdt.c Normal file
View File

@ -0,0 +1,254 @@
/*
* Driver for watchdog device controlled through GPIO-line
*
* Author: 2013, Alexander Shiyan <shc_work@mail.ru>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/err.h>
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/notifier.h>
#include <linux/of_gpio.h>
#include <linux/platform_device.h>
#include <linux/reboot.h>
#include <linux/watchdog.h>
#define SOFT_TIMEOUT_MIN 1
#define SOFT_TIMEOUT_DEF 60
#define SOFT_TIMEOUT_MAX 0xffff
enum {
HW_ALGO_TOGGLE,
HW_ALGO_LEVEL,
};
struct gpio_wdt_priv {
int gpio;
bool active_low;
bool state;
unsigned int hw_algo;
unsigned int hw_margin;
unsigned long last_jiffies;
struct notifier_block notifier;
struct timer_list timer;
struct watchdog_device wdd;
};
static void gpio_wdt_disable(struct gpio_wdt_priv *priv)
{
gpio_set_value_cansleep(priv->gpio, !priv->active_low);
/* Put GPIO back to tristate */
if (priv->hw_algo == HW_ALGO_TOGGLE)
gpio_direction_input(priv->gpio);
}
static int gpio_wdt_start(struct watchdog_device *wdd)
{
struct gpio_wdt_priv *priv = watchdog_get_drvdata(wdd);
priv->state = priv->active_low;
gpio_direction_output(priv->gpio, priv->state);
priv->last_jiffies = jiffies;
mod_timer(&priv->timer, priv->last_jiffies + priv->hw_margin);
return 0;
}
static int gpio_wdt_stop(struct watchdog_device *wdd)
{
struct gpio_wdt_priv *priv = watchdog_get_drvdata(wdd);
mod_timer(&priv->timer, 0);
gpio_wdt_disable(priv);
return 0;
}
static int gpio_wdt_ping(struct watchdog_device *wdd)
{
struct gpio_wdt_priv *priv = watchdog_get_drvdata(wdd);
priv->last_jiffies = jiffies;
return 0;
}
static int gpio_wdt_set_timeout(struct watchdog_device *wdd, unsigned int t)
{
wdd->timeout = t;
return gpio_wdt_ping(wdd);
}
static void gpio_wdt_hwping(unsigned long data)
{
struct watchdog_device *wdd = (struct watchdog_device *)data;
struct gpio_wdt_priv *priv = watchdog_get_drvdata(wdd);
if (time_after(jiffies, priv->last_jiffies +
msecs_to_jiffies(wdd->timeout * 1000))) {
dev_crit(wdd->dev, "Timer expired. System will reboot soon!\n");
return;
}
/* Restart timer */
mod_timer(&priv->timer, jiffies + priv->hw_margin);
switch (priv->hw_algo) {
case HW_ALGO_TOGGLE:
/* Toggle output pin */
priv->state = !priv->state;
gpio_set_value_cansleep(priv->gpio, priv->state);
break;
case HW_ALGO_LEVEL:
/* Pulse */
gpio_set_value_cansleep(priv->gpio, !priv->active_low);
udelay(1);
gpio_set_value_cansleep(priv->gpio, priv->active_low);
break;
}
}
static int gpio_wdt_notify_sys(struct notifier_block *nb, unsigned long code,
void *unused)
{
struct gpio_wdt_priv *priv = container_of(nb, struct gpio_wdt_priv,
notifier);
mod_timer(&priv->timer, 0);
switch (code) {
case SYS_HALT:
case SYS_POWER_OFF:
gpio_wdt_disable(priv);
break;
default:
break;
}
return NOTIFY_DONE;
}
static const struct watchdog_info gpio_wdt_ident = {
.options = WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING |
WDIOF_SETTIMEOUT,
.identity = "GPIO Watchdog",
};
static const struct watchdog_ops gpio_wdt_ops = {
.owner = THIS_MODULE,
.start = gpio_wdt_start,
.stop = gpio_wdt_stop,
.ping = gpio_wdt_ping,
.set_timeout = gpio_wdt_set_timeout,
};
static int gpio_wdt_probe(struct platform_device *pdev)
{
struct gpio_wdt_priv *priv;
enum of_gpio_flags flags;
unsigned int hw_margin;
unsigned long f = 0;
const char *algo;
int ret;
priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
priv->gpio = of_get_gpio_flags(pdev->dev.of_node, 0, &flags);
if (!gpio_is_valid(priv->gpio))
return priv->gpio;
priv->active_low = flags & OF_GPIO_ACTIVE_LOW;
ret = of_property_read_string(pdev->dev.of_node, "hw_algo", &algo);
if (ret)
return ret;
if (!strncmp(algo, "toggle", 6)) {
priv->hw_algo = HW_ALGO_TOGGLE;
f = GPIOF_IN;
} else if (!strncmp(algo, "level", 5)) {
priv->hw_algo = HW_ALGO_LEVEL;
f = priv->active_low ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW;
} else {
return -EINVAL;
}
ret = devm_gpio_request_one(&pdev->dev, priv->gpio, f,
dev_name(&pdev->dev));
if (ret)
return ret;
ret = of_property_read_u32(pdev->dev.of_node,
"hw_margin_ms", &hw_margin);
if (ret)
return ret;
/* Disallow values lower than 2 and higher than 65535 ms */
if (hw_margin < 2 || hw_margin > 65535)
return -EINVAL;
/* Use safe value (1/2 of real timeout) */
priv->hw_margin = msecs_to_jiffies(hw_margin / 2);
watchdog_set_drvdata(&priv->wdd, priv);
priv->wdd.info = &gpio_wdt_ident;
priv->wdd.ops = &gpio_wdt_ops;
priv->wdd.min_timeout = SOFT_TIMEOUT_MIN;
priv->wdd.max_timeout = SOFT_TIMEOUT_MAX;
if (watchdog_init_timeout(&priv->wdd, 0, &pdev->dev) < 0)
priv->wdd.timeout = SOFT_TIMEOUT_DEF;
setup_timer(&priv->timer, gpio_wdt_hwping, (unsigned long)&priv->wdd);
ret = watchdog_register_device(&priv->wdd);
if (ret)
return ret;
priv->notifier.notifier_call = gpio_wdt_notify_sys;
ret = register_reboot_notifier(&priv->notifier);
if (ret)
watchdog_unregister_device(&priv->wdd);
return ret;
}
static int gpio_wdt_remove(struct platform_device *pdev)
{
struct gpio_wdt_priv *priv = platform_get_drvdata(pdev);
del_timer_sync(&priv->timer);
unregister_reboot_notifier(&priv->notifier);
watchdog_unregister_device(&priv->wdd);
return 0;
}
static const struct of_device_id gpio_wdt_dt_ids[] = {
{ .compatible = "linux,wdt-gpio", },
{ }
};
MODULE_DEVICE_TABLE(of, gpio_wdt_dt_ids);
static struct platform_driver gpio_wdt_driver = {
.driver = {
.name = "gpio-wdt",
.owner = THIS_MODULE,
.of_match_table = gpio_wdt_dt_ids,
},
.probe = gpio_wdt_probe,
.remove = gpio_wdt_remove,
};
module_platform_driver(gpio_wdt_driver);
MODULE_AUTHOR("Alexander Shiyan <shc_work@mail.ru>");
MODULE_DESCRIPTION("GPIO Watchdog");
MODULE_LICENSE("GPL");

13
drivers/watchdog/hpwdt.c
View File

@ -39,7 +39,7 @@
#endif /* CONFIG_HPWDT_NMI_DECODING */
#include <asm/nmi.h>
#define HPWDT_VERSION "1.3.2"
#define HPWDT_VERSION "1.3.3"
#define SECS_TO_TICKS(secs) ((secs) * 1000 / 128)
#define TICKS_TO_SECS(ticks) ((ticks) * 128 / 1000)
#define HPWDT_MAX_TIMER TICKS_TO_SECS(65535)
@ -55,7 +55,7 @@ static void __iomem *pci_mem_addr; /* the PCI-memory address */
static unsigned long __iomem *hpwdt_timer_reg;
static unsigned long __iomem *hpwdt_timer_con;
static DEFINE_PCI_DEVICE_TABLE(hpwdt_devices) = {
static const struct pci_device_id hpwdt_devices[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_COMPAQ, 0xB203) }, /* iLO2 */
{ PCI_DEVICE(PCI_VENDOR_ID_HP, 0x3306) }, /* iLO3 */
{0}, /* terminate list */
@ -501,8 +501,13 @@ static int hpwdt_pretimeout(unsigned int ulReason, struct pt_regs *regs)
"but unable to determine source.\n");
}
}
panic("An NMI occurred, please see the Integrated "
"Management Log for details.\n");
panic("An NMI occurred. Depending on your system the reason "
"for the NMI is logged in any one of the following "
"resources:\n"
"1. Integrated Management Log (IML)\n"
"2. OA Syslog\n"
"3. OA Forward Progress Log\n"
"4. iLO Event Log");
out:
return NMI_DONE;

2
drivers/watchdog/i6300esb.c
View File

@ -334,7 +334,7 @@ static struct miscdevice esb_miscdev = {
/*
* Data for PCI driver interface
*/
static DEFINE_PCI_DEVICE_TABLE(esb_pci_tbl) = {
static const struct pci_device_id esb_pci_tbl[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_9), },
{ 0, }, /* End of list */
};

4
drivers/watchdog/imx2_wdt.c
View File

@ -2,6 +2,7 @@
* Watchdog driver for IMX2 and later processors
*
* Copyright (C) 2010 Wolfram Sang, Pengutronix e.K. <w.sang@pengutronix.de>
* Copyright (C) 2014 Freescale Semiconductor, Inc.
*
* some parts adapted by similar drivers from Darius Augulis and Vladimir
* Zapolskiy, additional improvements by Wim Van Sebroeck.
@ -40,6 +41,7 @@
#define IMX2_WDT_WCR_WT (0xFF << 8) /* -> Watchdog Timeout Field */
#define IMX2_WDT_WCR_WRE (1 << 3) /* -> WDOG Reset Enable */
#define IMX2_WDT_WCR_WDE (1 << 2) /* -> Watchdog Enable */
#define IMX2_WDT_WCR_WDZST (1 << 0) /* -> Watchdog timer Suspend */
#define IMX2_WDT_WSR 0x02 /* Service Register */
#define IMX2_WDT_SEQ1 0x5555 /* -> service sequence 1 */
@ -87,6 +89,8 @@ static inline void imx2_wdt_setup(void)
{
u16 val = __raw_readw(imx2_wdt.base + IMX2_WDT_WCR);
/* Suspend timer in low power mode, write once-only */
val |= IMX2_WDT_WCR_WDZST;
/* Strip the old watchdog Time-Out value */
val &= ~IMX2_WDT_WCR_WT;
/* Generate reset if WDOG times out */

15
drivers/watchdog/moxart_wdt.c
View File

@ -19,6 +19,8 @@
#include <linux/watchdog.h>
#include <linux/moduleparam.h>
#include <asm/system_misc.h>
#define REG_COUNT 0x4
#define REG_MODE 0x8
#define REG_ENABLE 0xC
@ -29,8 +31,17 @@ struct moxart_wdt_dev {
unsigned int clock_frequency;
};
static struct moxart_wdt_dev *moxart_restart_ctx;
static int heartbeat;
static void moxart_wdt_restart(enum reboot_mode reboot_mode, const char *cmd)
{
writel(1, moxart_restart_ctx->base + REG_COUNT);
writel(0x5ab9, moxart_restart_ctx->base + REG_MODE);
writel(0x03, moxart_restart_ctx->base + REG_ENABLE);
}
static int moxart_wdt_stop(struct watchdog_device *wdt_dev)
{
struct moxart_wdt_dev *moxart_wdt = watchdog_get_drvdata(wdt_dev);
@ -125,6 +136,9 @@ static int moxart_wdt_probe(struct platform_device *pdev)
if (err)
return err;
moxart_restart_ctx = moxart_wdt;
arm_pm_restart = moxart_wdt_restart;
dev_dbg(dev, "Watchdog enabled (heartbeat=%d sec, nowayout=%d)\n",
moxart_wdt->dev.timeout, nowayout);
@ -135,6 +149,7 @@ static int moxart_wdt_remove(struct platform_device *pdev)
{
struct moxart_wdt_dev *moxart_wdt = platform_get_drvdata(pdev);
arm_pm_restart = NULL;
moxart_wdt_stop(&moxart_wdt->dev);
watchdog_unregister_device(&moxart_wdt->dev);

116
drivers/watchdog/mpc8xxx_wdt.c
View File

@ -73,9 +73,7 @@ MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started "
* to 0
*/
static int prescale = 1;
static unsigned int timeout_sec;
static unsigned long wdt_is_open;
static DEFINE_SPINLOCK(wdt_spinlock);
static void mpc8xxx_wdt_keepalive(void)
@ -87,39 +85,23 @@ static void mpc8xxx_wdt_keepalive(void)
spin_unlock(&wdt_spinlock);
}
static struct watchdog_device mpc8xxx_wdt_dev;
static void mpc8xxx_wdt_timer_ping(unsigned long arg);
static DEFINE_TIMER(wdt_timer, mpc8xxx_wdt_timer_ping, 0, 0);
static DEFINE_TIMER(wdt_timer, mpc8xxx_wdt_timer_ping, 0,
(unsigned long)&mpc8xxx_wdt_dev);
static void mpc8xxx_wdt_timer_ping(unsigned long arg)
{
struct watchdog_device *w = (struct watchdog_device *)arg;
mpc8xxx_wdt_keepalive();
/* We're pinging it twice faster than needed, just to be sure. */
mod_timer(&wdt_timer, jiffies + HZ * timeout_sec / 2);
mod_timer(&wdt_timer, jiffies + HZ * w->timeout / 2);
}
static void mpc8xxx_wdt_pr_warn(const char *msg)
{
pr_crit("%s, expect the %s soon!\n", msg,
reset ? "reset" : "machine check exception");
}
static ssize_t mpc8xxx_wdt_write(struct file *file, const char __user *buf,
size_t count, loff_t *ppos)
{
if (count)
mpc8xxx_wdt_keepalive();
return count;
}
static int mpc8xxx_wdt_open(struct inode *inode, struct file *file)
static int mpc8xxx_wdt_start(struct watchdog_device *w)
{
u32 tmp = SWCRR_SWEN;
if (test_and_set_bit(0, &wdt_is_open))
return -EBUSY;
/* Once we start the watchdog we can't stop it */
if (nowayout)
__module_get(THIS_MODULE);
/* Good, fire up the show */
if (prescale)
@ -133,59 +115,37 @@ static int mpc8xxx_wdt_open(struct inode *inode, struct file *file)
del_timer_sync(&wdt_timer);
return nonseekable_open(inode, file);
}
static int mpc8xxx_wdt_release(struct inode *inode, struct file *file)
{
if (!nowayout)
mpc8xxx_wdt_timer_ping(0);
else
mpc8xxx_wdt_pr_warn("watchdog closed");
clear_bit(0, &wdt_is_open);
return 0;
}
static long mpc8xxx_wdt_ioctl(struct file *file, unsigned int cmd,
unsigned long arg)
static int mpc8xxx_wdt_ping(struct watchdog_device *w)
{
void __user *argp = (void __user *)arg;
int __user *p = argp;
static const struct watchdog_info ident = {
.options = WDIOF_KEEPALIVEPING,
.firmware_version = 1,
.identity = "MPC8xxx",
};
switch (cmd) {
case WDIOC_GETSUPPORT:
return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0;
case WDIOC_GETSTATUS:
case WDIOC_GETBOOTSTATUS:
return put_user(0, p);
case WDIOC_KEEPALIVE:
mpc8xxx_wdt_keepalive();
return 0;
case WDIOC_GETTIMEOUT:
return put_user(timeout_sec, p);
default:
return -ENOTTY;
}
mpc8xxx_wdt_keepalive();
return 0;
}
static const struct file_operations mpc8xxx_wdt_fops = {
.owner = THIS_MODULE,
.llseek = no_llseek,
.write = mpc8xxx_wdt_write,
.unlocked_ioctl = mpc8xxx_wdt_ioctl,
.open = mpc8xxx_wdt_open,
.release = mpc8xxx_wdt_release,
static int mpc8xxx_wdt_stop(struct watchdog_device *w)
{
mod_timer(&wdt_timer, jiffies);
return 0;
}
static struct watchdog_info mpc8xxx_wdt_info = {
.options = WDIOF_KEEPALIVEPING,
.firmware_version = 1,
.identity = "MPC8xxx",
};
static struct miscdevice mpc8xxx_wdt_miscdev = {
.minor = WATCHDOG_MINOR,
.name = "watchdog",
.fops = &mpc8xxx_wdt_fops,
static struct watchdog_ops mpc8xxx_wdt_ops = {
.owner = THIS_MODULE,
.start = mpc8xxx_wdt_start,
.ping = mpc8xxx_wdt_ping,
.stop = mpc8xxx_wdt_stop,
};
static struct watchdog_device mpc8xxx_wdt_dev = {
.info = &mpc8xxx_wdt_info,
.ops = &mpc8xxx_wdt_ops,
};
static const struct of_device_id mpc8xxx_wdt_match[];
@ -197,6 +157,7 @@ static int mpc8xxx_wdt_probe(struct platform_device *ofdev)
const struct mpc8xxx_wdt_type *wdt_type;
u32 freq = fsl_get_sys_freq();
bool enabled;
unsigned int timeout_sec;
match = of_match_device(mpc8xxx_wdt_match, &ofdev->dev);
if (!match)
@ -223,6 +184,7 @@ static int mpc8xxx_wdt_probe(struct platform_device *ofdev)
else
timeout_sec = timeout / freq;
mpc8xxx_wdt_dev.timeout = timeout_sec;
#ifdef MODULE
ret = mpc8xxx_wdt_init_late();
if (ret)
@ -238,7 +200,7 @@ static int mpc8xxx_wdt_probe(struct platform_device *ofdev)
* userspace handles it.
*/
if (enabled)
mpc8xxx_wdt_timer_ping(0);
mod_timer(&wdt_timer, jiffies);
return 0;
err_unmap:
iounmap(wd_base);
@ -248,9 +210,10 @@ err_unmap:
static int mpc8xxx_wdt_remove(struct platform_device *ofdev)
{
mpc8xxx_wdt_pr_warn("watchdog removed");
pr_crit("Watchdog removed, expect the %s soon!\n",
reset ? "reset" : "machine check exception");
del_timer_sync(&wdt_timer);
misc_deregister(&mpc8xxx_wdt_miscdev);
watchdog_unregister_device(&mpc8xxx_wdt_dev);
iounmap(wd_base);
return 0;
@ -302,10 +265,11 @@ static int mpc8xxx_wdt_init_late(void)
if (!wd_base)
return -ENODEV;
ret = misc_register(&mpc8xxx_wdt_miscdev);
watchdog_set_nowayout(&mpc8xxx_wdt_dev, nowayout);
ret = watchdog_register_device(&mpc8xxx_wdt_dev);
if (ret) {
pr_err("cannot register miscdev on minor=%d (err=%d)\n",
WATCHDOG_MINOR, ret);
pr_err("cannot register watchdog device (err=%d)\n", ret);
return ret;
}
return 0;

2
drivers/watchdog/nv_tco.c
View File

@ -289,7 +289,7 @@ static struct miscdevice nv_tco_miscdev = {
* register a pci_driver, because someone else might one day
* want to register another driver on the same PCI id.
*/
static DEFINE_PCI_DEVICE_TABLE(tco_pci_tbl) = {
static const struct pci_device_id tco_pci_tbl[] = {
{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SMBUS,
PCI_ANY_ID, PCI_ANY_ID, },
{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SMBUS,

2
drivers/watchdog/pcwd_pci.c
View File

@ -801,7 +801,7 @@ static void pcipcwd_card_exit(struct pci_dev *pdev)
cards_found--;
}
static DEFINE_PCI_DEVICE_TABLE(pcipcwd_pci_tbl) = {
static const struct pci_device_id pcipcwd_pci_tbl[] = {
{ PCI_VENDOR_ID_QUICKLOGIC, PCI_DEVICE_ID_WATCHDOG_PCIPCWD,
PCI_ANY_ID, PCI_ANY_ID, },
{ 0 }, /* End of list */

203
drivers/watchdog/s3c2410_wdt.c
View File

@ -40,6 +40,8 @@
#include <linux/slab.h>
#include <linux/err.h>
#include <linux/of.h>
#include <linux/mfd/syscon.h>
#include <linux/regmap.h>
#define S3C2410_WTCON 0x00
#define S3C2410_WTDAT 0x04
@ -60,6 +62,16 @@
#define CONFIG_S3C2410_WATCHDOG_ATBOOT (0)
#define CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME (15)
#define EXYNOS5_RST_STAT_REG_OFFSET 0x0404
#define EXYNOS5_WDT_DISABLE_REG_OFFSET 0x0408
#define EXYNOS5_WDT_MASK_RESET_REG_OFFSET 0x040c
#define QUIRK_HAS_PMU_CONFIG (1 << 0)
#define QUIRK_HAS_RST_STAT (1 << 1)
/* These quirks require that we have a PMU register map */
#define QUIRKS_HAVE_PMUREG (QUIRK_HAS_PMU_CONFIG | \
QUIRK_HAS_RST_STAT)
static bool nowayout = WATCHDOG_NOWAYOUT;
static int tmr_margin;
static int tmr_atboot = CONFIG_S3C2410_WATCHDOG_ATBOOT;
@ -83,6 +95,30 @@ MODULE_PARM_DESC(soft_noboot, "Watchdog action, set to 1 to ignore reboots, "
"0 to reboot (default 0)");
MODULE_PARM_DESC(debug, "Watchdog debug, set to >1 for debug (default 0)");
/**
* struct s3c2410_wdt_variant - Per-variant config data
*
* @disable_reg: Offset in pmureg for the register that disables the watchdog
* timer reset functionality.
* @mask_reset_reg: Offset in pmureg for the register that masks the watchdog
* timer reset functionality.
* @mask_bit: Bit number for the watchdog timer in the disable register and the
* mask reset register.
* @rst_stat_reg: Offset in pmureg for the register that has the reset status.
* @rst_stat_bit: Bit number in the rst_stat register indicating a watchdog
* reset.
* @quirks: A bitfield of quirks.
*/
struct s3c2410_wdt_variant {
int disable_reg;
int mask_reset_reg;
int mask_bit;
int rst_stat_reg;
int rst_stat_bit;
u32 quirks;
};
struct s3c2410_wdt {
struct device *dev;
struct clk *clock;
@ -93,8 +129,54 @@ struct s3c2410_wdt {
unsigned long wtdat_save;
struct watchdog_device wdt_device;
struct notifier_block freq_transition;
struct s3c2410_wdt_variant *drv_data;
struct regmap *pmureg;
};
static const struct s3c2410_wdt_variant drv_data_s3c2410 = {
.quirks = 0
};
#ifdef CONFIG_OF
static const struct s3c2410_wdt_variant drv_data_exynos5250 = {
.disable_reg = EXYNOS5_WDT_DISABLE_REG_OFFSET,
.mask_reset_reg = EXYNOS5_WDT_MASK_RESET_REG_OFFSET,
.mask_bit = 20,
.rst_stat_reg = EXYNOS5_RST_STAT_REG_OFFSET,
.rst_stat_bit = 20,
.quirks = QUIRK_HAS_PMU_CONFIG | QUIRK_HAS_RST_STAT,
};
static const struct s3c2410_wdt_variant drv_data_exynos5420 = {
.disable_reg = EXYNOS5_WDT_DISABLE_REG_OFFSET,
.mask_reset_reg = EXYNOS5_WDT_MASK_RESET_REG_OFFSET,
.mask_bit = 0,
.rst_stat_reg = EXYNOS5_RST_STAT_REG_OFFSET,
.rst_stat_bit = 9,
.quirks = QUIRK_HAS_PMU_CONFIG | QUIRK_HAS_RST_STAT,
};
static const struct of_device_id s3c2410_wdt_match[] = {
{ .compatible = "samsung,s3c2410-wdt",
.data = &drv_data_s3c2410 },
{ .compatible = "samsung,exynos5250-wdt",
.data = &drv_data_exynos5250 },
{ .compatible = "samsung,exynos5420-wdt",
.data = &drv_data_exynos5420 },
{},
};
MODULE_DEVICE_TABLE(of, s3c2410_wdt_match);
#endif
static const struct platform_device_id s3c2410_wdt_ids[] = {
{
.name = "s3c2410-wdt",
.driver_data = (unsigned long)&drv_data_s3c2410,
},
{}
};
MODULE_DEVICE_TABLE(platform, s3c2410_wdt_ids);
/* watchdog control routines */
#define DBG(fmt, ...) \
@ -110,6 +192,35 @@ static inline struct s3c2410_wdt *freq_to_wdt(struct notifier_block *nb)
return container_of(nb, struct s3c2410_wdt, freq_transition);
}
static int s3c2410wdt_mask_and_disable_reset(struct s3c2410_wdt *wdt, bool mask)
{
int ret;
u32 mask_val = 1 << wdt->drv_data->mask_bit;
u32 val = 0;
/* No need to do anything if no PMU CONFIG needed */
if (!(wdt->drv_data->quirks & QUIRK_HAS_PMU_CONFIG))
return 0;
if (mask)
val = mask_val;
ret = regmap_update_bits(wdt->pmureg,
wdt->drv_data->disable_reg,
mask_val, val);
if (ret < 0)
goto error;
ret = regmap_update_bits(wdt->pmureg,
wdt->drv_data->mask_reset_reg,
mask_val, val);
error:
if (ret < 0)
dev_err(wdt->dev, "failed to update reg(%d)\n", ret);
return ret;
}
static int s3c2410wdt_keepalive(struct watchdog_device *wdd)
{
struct s3c2410_wdt *wdt = watchdog_get_drvdata(wdd);
@ -188,7 +299,7 @@ static int s3c2410wdt_set_heartbeat(struct watchdog_device *wdd, unsigned timeou
if (timeout < 1)
return -EINVAL;
freq /= 128;
freq = DIV_ROUND_UP(freq, 128);
count = timeout * freq;
DBG("%s: count=%d, timeout=%d, freq=%lu\n",
@ -200,21 +311,18 @@ static int s3c2410wdt_set_heartbeat(struct watchdog_device *wdd, unsigned timeou
*/
if (count >= 0x10000) {
for (divisor = 1; divisor <= 0x100; divisor++) {
if ((count / divisor) < 0x10000)
break;
}
divisor = DIV_ROUND_UP(count, 0xffff);
if ((count / divisor) >= 0x10000) {
if (divisor > 0x100) {
dev_err(wdt->dev, "timeout %d too big\n", timeout);
return -EINVAL;
}
}
DBG("%s: timeout=%d, divisor=%d, count=%d (%08x)\n",
__func__, timeout, divisor, count, count/divisor);
__func__, timeout, divisor, count, DIV_ROUND_UP(count, divisor));
count /= divisor;
count = DIV_ROUND_UP(count, divisor);
wdt->count = count;
/* update the pre-scaler */
@ -264,7 +372,7 @@ static irqreturn_t s3c2410wdt_irq(int irqno, void *param)
return IRQ_HANDLED;
}
#ifdef CONFIG_CPU_FREQ
#ifdef CONFIG_ARM_S3C24XX_CPUFREQ
static int s3c2410wdt_cpufreq_transition(struct notifier_block *nb,
unsigned long val, void *data)
@ -331,6 +439,37 @@ static inline void s3c2410wdt_cpufreq_deregister(struct s3c2410_wdt *wdt)
}
#endif
static inline unsigned int s3c2410wdt_get_bootstatus(struct s3c2410_wdt *wdt)
{
unsigned int rst_stat;
int ret;
if (!(wdt->drv_data->quirks & QUIRK_HAS_RST_STAT))
return 0;
ret = regmap_read(wdt->pmureg, wdt->drv_data->rst_stat_reg, &rst_stat);
if (ret)
dev_warn(wdt->dev, "Couldn't get RST_STAT register\n");
else if (rst_stat & BIT(wdt->drv_data->rst_stat_bit))
return WDIOF_CARDRESET;
return 0;
}
/* s3c2410_get_wdt_driver_data */
static inline struct s3c2410_wdt_variant *
get_wdt_drv_data(struct platform_device *pdev)
{
if (pdev->dev.of_node) {
const struct of_device_id *match;
match = of_match_node(s3c2410_wdt_match, pdev->dev.of_node);
return (struct s3c2410_wdt_variant *)match->data;
} else {
return (struct s3c2410_wdt_variant *)
platform_get_device_id(pdev)->driver_data;
}
}
static int s3c2410wdt_probe(struct platform_device *pdev)
{
struct device *dev;
@ -353,6 +492,16 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
spin_lock_init(&wdt->lock);
wdt->wdt_device = s3c2410_wdd;
wdt->drv_data = get_wdt_drv_data(pdev);
if (wdt->drv_data->quirks & QUIRKS_HAVE_PMUREG) {
wdt->pmureg = syscon_regmap_lookup_by_phandle(dev->of_node,
"samsung,syscon-phandle");
if (IS_ERR(wdt->pmureg)) {
dev_err(dev, "syscon regmap lookup failed.\n");
return PTR_ERR(wdt->pmureg);
}
}
wdt_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
if (wdt_irq == NULL) {
dev_err(dev, "no irq resource specified\n");
@ -415,12 +564,18 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
watchdog_set_nowayout(&wdt->wdt_device, nowayout);
wdt->wdt_device.bootstatus = s3c2410wdt_get_bootstatus(wdt);
ret = watchdog_register_device(&wdt->wdt_device);
if (ret) {
dev_err(dev, "cannot register watchdog (%d)\n", ret);
goto err_cpufreq;
}
ret = s3c2410wdt_mask_and_disable_reset(wdt, false);
if (ret < 0)
goto err_unregister;
if (tmr_atboot && started == 0) {
dev_info(dev, "starting watchdog timer\n");
s3c2410wdt_start(&wdt->wdt_device);
@ -445,6 +600,9 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
return 0;
err_unregister:
watchdog_unregister_device(&wdt->wdt_device);
err_cpufreq:
s3c2410wdt_cpufreq_deregister(wdt);
@ -458,8 +616,13 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
static int s3c2410wdt_remove(struct platform_device *dev)
{
int ret;
struct s3c2410_wdt *wdt = platform_get_drvdata(dev);
ret = s3c2410wdt_mask_and_disable_reset(wdt, true);
if (ret < 0)
return ret;
watchdog_unregister_device(&wdt->wdt_device);
s3c2410wdt_cpufreq_deregister(wdt);
@ -474,6 +637,8 @@ static void s3c2410wdt_shutdown(struct platform_device *dev)
{
struct s3c2410_wdt *wdt = platform_get_drvdata(dev);
s3c2410wdt_mask_and_disable_reset(wdt, true);
s3c2410wdt_stop(&wdt->wdt_device);
}
@ -481,12 +646,17 @@ static void s3c2410wdt_shutdown(struct platform_device *dev)
static int s3c2410wdt_suspend(struct device *dev)
{
int ret;
struct s3c2410_wdt *wdt = dev_get_drvdata(dev);
/* Save watchdog state, and turn it off. */
wdt->wtcon_save = readl(wdt->reg_base + S3C2410_WTCON);
wdt->wtdat_save = readl(wdt->reg_base + S3C2410_WTDAT);
ret = s3c2410wdt_mask_and_disable_reset(wdt, true);
if (ret < 0)
return ret;
/* Note that WTCNT doesn't need to be saved. */
s3c2410wdt_stop(&wdt->wdt_device);
@ -495,6 +665,7 @@ static int s3c2410wdt_suspend(struct device *dev)
static int s3c2410wdt_resume(struct device *dev)
{
int ret;
struct s3c2410_wdt *wdt = dev_get_drvdata(dev);
/* Restore watchdog state. */
@ -502,6 +673,10 @@ static int s3c2410wdt_resume(struct device *dev)
writel(wdt->wtdat_save, wdt->reg_base + S3C2410_WTCNT);/* Reset count */
writel(wdt->wtcon_save, wdt->reg_base + S3C2410_WTCON);
ret = s3c2410wdt_mask_and_disable_reset(wdt, false);
if (ret < 0)
return ret;
dev_info(dev, "watchdog %sabled\n",
(wdt->wtcon_save & S3C2410_WTCON_ENABLE) ? "en" : "dis");
@ -512,18 +687,11 @@ static int s3c2410wdt_resume(struct device *dev)
static SIMPLE_DEV_PM_OPS(s3c2410wdt_pm_ops, s3c2410wdt_suspend,
s3c2410wdt_resume);
#ifdef CONFIG_OF
static const struct of_device_id s3c2410_wdt_match[] = {
{ .compatible = "samsung,s3c2410-wdt" },
{},
};
MODULE_DEVICE_TABLE(of, s3c2410_wdt_match);
#endif
static struct platform_driver s3c2410wdt_driver = {
.probe = s3c2410wdt_probe,
.remove = s3c2410wdt_remove,
.shutdown = s3c2410wdt_shutdown,
.id_table = s3c2410_wdt_ids,
.driver = {
.owner = THIS_MODULE,
.name = "s3c2410-wdt",
@ -538,4 +706,3 @@ MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>, "
"Dimitry Andric <dimitry.andric@tomtom.com>");
MODULE_DESCRIPTION("S3C2410 Watchdog Device Driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:s3c2410-wdt");

2
drivers/watchdog/sirfsoc_wdt.c
View File

@ -212,7 +212,7 @@ static struct platform_driver sirfsoc_wdt_driver = {
.name = "sirfsoc-wdt",
.owner = THIS_MODULE,
.pm = &sirfsoc_wdt_pm_ops,
.of_match_table = of_match_ptr(sirfsoc_wdt_of_match),
.of_match_table = sirfsoc_wdt_of_match,
},
.probe = sirfsoc_wdt_probe,
.remove = sirfsoc_wdt_remove,

2
drivers/watchdog/sp5100_tco.c
View File

@ -303,7 +303,7 @@ static struct miscdevice sp5100_tco_miscdev = {
* register a pci_driver, because someone else might
* want to register another driver on the same PCI id.
*/
static DEFINE_PCI_DEVICE_TABLE(sp5100_tco_pci_tbl) = {
static const struct pci_device_id sp5100_tco_pci_tbl[] = {
{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS, PCI_ANY_ID,
PCI_ANY_ID, },
{ 0, }, /* End of list */

2
drivers/watchdog/via_wdt.c
View File

@ -239,7 +239,7 @@ static void wdt_remove(struct pci_dev *pdev)
pci_disable_device(pdev);
}
static DEFINE_PCI_DEVICE_TABLE(wdt_pci_table) = {
static const struct pci_device_id wdt_pci_table[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_CX700) },
{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VX800) },
{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VX855) },

234
drivers/watchdog/w83627hf_wdt.c
View File

@ -44,10 +44,13 @@
#define WATCHDOG_NAME "w83627hf/thf/hg/dhg WDT"
#define WATCHDOG_TIMEOUT 60 /* 60 sec default timeout */
/* You must set this - there is no sane way to probe for this board. */
static int wdt_io = 0x2E;
module_param(wdt_io, int, 0);
MODULE_PARM_DESC(wdt_io, "w83627hf/thf WDT io port (default 0x2E)");
static int wdt_io;
static int cr_wdt_timeout; /* WDT timeout register */
static int cr_wdt_control; /* WDT control register */
enum chips { w83627hf, w83627s, w83697hf, w83697ug, w83637hf, w83627thf,
w83687thf, w83627ehf, w83627dhg, w83627uhg, w83667hg, w83627dhg_p,
w83667hg_b, nct6775, nct6776, nct6779 };
static int timeout; /* in seconds */
module_param(timeout, int, 0);
@ -72,6 +75,29 @@ MODULE_PARM_DESC(nowayout,
#define W83627HF_LD_WDT 0x08
#define W83627HF_ID 0x52
#define W83627S_ID 0x59
#define W83697HF_ID 0x60
#define W83697UG_ID 0x68
#define W83637HF_ID 0x70
#define W83627THF_ID 0x82
#define W83687THF_ID 0x85
#define W83627EHF_ID 0x88
#define W83627DHG_ID 0xa0
#define W83627UHG_ID 0xa2
#define W83667HG_ID 0xa5
#define W83627DHG_P_ID 0xb0
#define W83667HG_B_ID 0xb3
#define NCT6775_ID 0xb4
#define NCT6776_ID 0xc3
#define NCT6779_ID 0xc5
#define W83627HF_WDT_TIMEOUT 0xf6
#define W83697HF_WDT_TIMEOUT 0xf4
#define W83627HF_WDT_CONTROL 0xf5
#define W83697HF_WDT_CONTROL 0xf3
static void superio_outb(int reg, int val)
{
outb(reg, WDT_EFER);
@ -106,10 +132,7 @@ static void superio_exit(void)
release_region(wdt_io, 2);
}
/* tyan motherboards seem to set F5 to 0x4C ?
* So explicitly init to appropriate value. */
static int w83627hf_init(struct watchdog_device *wdog)
static int w83627hf_init(struct watchdog_device *wdog, enum chips chip)
{
int ret;
unsigned char t;
@ -119,35 +142,83 @@ static int w83627hf_init(struct watchdog_device *wdog)
return ret;
superio_select(W83627HF_LD_WDT);
t = superio_inb(0x20); /* check chip version */
if (t == 0x82) { /* W83627THF */
t = (superio_inb(0x2b) & 0xf7);
superio_outb(0x2b, t | 0x04); /* set GPIO3 to WDT0 */
} else if (t == 0x88 || t == 0xa0) { /* W83627EHF / W83627DHG */
t = superio_inb(0x2d);
superio_outb(0x2d, t & ~0x01); /* set GPIO5 to WDT0 */
}
/* set CR30 bit 0 to activate GPIO2 */
t = superio_inb(0x30);
if (!(t & 0x01))
superio_outb(0x30, t | 0x01);
t = superio_inb(0xF6);
switch (chip) {
case w83627hf:
case w83627s:
t = superio_inb(0x2B) & ~0x10;
superio_outb(0x2B, t); /* set GPIO24 to WDT0 */
break;
case w83697hf:
/* Set pin 119 to WDTO# mode (= CR29, WDT0) */
t = superio_inb(0x29) & ~0x60;
t |= 0x20;
superio_outb(0x29, t);
break;
case w83697ug:
/* Set pin 118 to WDTO# mode */
t = superio_inb(0x2b) & ~0x04;
superio_outb(0x2b, t);
break;
case w83627thf:
t = (superio_inb(0x2B) & ~0x08) | 0x04;
superio_outb(0x2B, t); /* set GPIO3 to WDT0 */
break;
case w83627dhg:
case w83627dhg_p:
t = superio_inb(0x2D) & ~0x01; /* PIN77 -> WDT0# */
superio_outb(0x2D, t); /* set GPIO5 to WDT0 */
t = superio_inb(cr_wdt_control);
t |= 0x02; /* enable the WDTO# output low pulse
* to the KBRST# pin */
superio_outb(cr_wdt_control, t);
break;
case w83637hf:
break;
case w83687thf:
t = superio_inb(0x2C) & ~0x80; /* PIN47 -> WDT0# */
superio_outb(0x2C, t);
break;
case w83627ehf:
case w83627uhg:
case w83667hg:
case w83667hg_b:
case nct6775:
case nct6776:
case nct6779:
/*
* These chips have a fixed WDTO# output pin (W83627UHG),
* or support more than one WDTO# output pin.
* Don't touch its configuration, and hope the BIOS
* does the right thing.
*/
t = superio_inb(cr_wdt_control);
t |= 0x02; /* enable the WDTO# output low pulse
* to the KBRST# pin */
superio_outb(cr_wdt_control, t);
break;
default:
break;
}
t = superio_inb(cr_wdt_timeout);
if (t != 0) {
pr_info("Watchdog already running. Resetting timeout to %d sec\n",
wdog->timeout);
superio_outb(0xF6, wdog->timeout);
superio_outb(cr_wdt_timeout, wdog->timeout);
}
/* set second mode & disable keyboard turning off watchdog */
t = superio_inb(0xF5) & ~0x0C;
/* enable the WDTO# output low pulse to the KBRST# pin */
t |= 0x02;
superio_outb(0xF5, t);
t = superio_inb(cr_wdt_control) & ~0x0C;
superio_outb(cr_wdt_control, t);
/* disable keyboard & mouse turning off watchdog */
t = superio_inb(0xF7) & ~0xC0;
/* reset trigger, disable keyboard & mouse turning off watchdog */
t = superio_inb(0xF7) & ~0xD0;
superio_outb(0xF7, t);
superio_exit();
@ -164,7 +235,7 @@ static int wdt_set_time(unsigned int timeout)
return ret;
superio_select(W83627HF_LD_WDT);
superio_outb(0xF6, timeout);
superio_outb(cr_wdt_timeout, timeout);
superio_exit();
return 0;
@ -197,7 +268,7 @@ static unsigned int wdt_get_time(struct watchdog_device *wdog)
return 0;
superio_select(W83627HF_LD_WDT);
timeleft = superio_inb(0xF6);
timeleft = superio_inb(cr_wdt_timeout);
superio_exit();
return timeleft;
@ -249,16 +320,123 @@ static struct notifier_block wdt_notifier = {
.notifier_call = wdt_notify_sys,
};
static int wdt_find(int addr)
{
u8 val;
int ret;
cr_wdt_timeout = W83627HF_WDT_TIMEOUT;
cr_wdt_control = W83627HF_WDT_CONTROL;
ret = superio_enter();
if (ret)
return ret;
superio_select(W83627HF_LD_WDT);
val = superio_inb(0x20);
switch (val) {
case W83627HF_ID:
ret = w83627hf;
break;
case W83627S_ID:
ret = w83627s;
break;
case W83697HF_ID:
ret = w83697hf;
cr_wdt_timeout = W83697HF_WDT_TIMEOUT;
cr_wdt_control = W83697HF_WDT_CONTROL;
break;
case W83697UG_ID:
ret = w83697ug;
cr_wdt_timeout = W83697HF_WDT_TIMEOUT;
cr_wdt_control = W83697HF_WDT_CONTROL;
break;
case W83637HF_ID:
ret = w83637hf;
break;
case W83627THF_ID:
ret = w83627thf;
break;
case W83687THF_ID:
ret = w83687thf;
break;
case W83627EHF_ID:
ret = w83627ehf;
break;
case W83627DHG_ID:
ret = w83627dhg;
break;
case W83627DHG_P_ID:
ret = w83627dhg_p;
break;
case W83627UHG_ID:
ret = w83627uhg;
break;
case W83667HG_ID:
ret = w83667hg;
break;
case W83667HG_B_ID:
ret = w83667hg_b;
break;
case NCT6775_ID:
ret = nct6775;
break;
case NCT6776_ID:
ret = nct6776;
break;
case NCT6779_ID:
ret = nct6779;
break;
case 0xff:
ret = -ENODEV;
break;
default:
ret = -ENODEV;
pr_err("Unsupported chip ID: 0x%02x\n", val);
break;
}
superio_exit();
return ret;
}
static int __init wdt_init(void)
{
int ret;
int chip;
const char * const chip_name[] = {
"W83627HF",
"W83627S",
"W83697HF",
"W83697UG",
"W83637HF",
"W83627THF",
"W83687THF",
"W83627EHF",
"W83627DHG",
"W83627UHG",
"W83667HG",
"W83667DHG-P",
"W83667HG-B",
"NCT6775",
"NCT6776",
"NCT6779",
};
pr_info("WDT driver for the Winbond(TM) W83627HF/THF/HG/DHG Super I/O chip initialising\n");
wdt_io = 0x2e;
chip = wdt_find(0x2e);
if (chip < 0) {
wdt_io = 0x4e;
chip = wdt_find(0x4e);
if (chip < 0)
return chip;
}
pr_info("WDT driver for %s Super I/O chip initialising\n",
chip_name[chip]);
watchdog_init_timeout(&wdt_dev, timeout, NULL);
watchdog_set_nowayout(&wdt_dev, nowayout);
ret = w83627hf_init(&wdt_dev);
ret = w83627hf_init(&wdt_dev, chip);
if (ret) {
pr_err("failed to initialize watchdog (err=%d)\n", ret);
return ret;

4
drivers/watchdog/watchdog_core.c
View File

@ -78,7 +78,7 @@ int watchdog_init_timeout(struct watchdog_device *wdd,
watchdog_check_min_max_timeout(wdd);
/* try to get the timeout module parameter first */
if (!watchdog_timeout_invalid(wdd, timeout_parm)) {
if (!watchdog_timeout_invalid(wdd, timeout_parm) && timeout_parm) {
wdd->timeout = timeout_parm;
return ret;
}
@ -89,7 +89,7 @@ int watchdog_init_timeout(struct watchdog_device *wdd,
if (dev == NULL || dev->of_node == NULL)
return ret;
of_property_read_u32(dev->of_node, "timeout-sec", &t);
if (!watchdog_timeout_invalid(wdd, t))
if (!watchdog_timeout_invalid(wdd, t) && t)
wdd->timeout = t;
else
ret = -EINVAL;

2
drivers/watchdog/wdt_pci.c
View File

@ -720,7 +720,7 @@ static void wdtpci_remove_one(struct pci_dev *pdev)
}
static DEFINE_PCI_DEVICE_TABLE(wdtpci_pci_tbl) = {
static const struct pci_device_id wdtpci_pci_tbl[] = {
{
.vendor = PCI_VENDOR_ID_ACCESSIO,
.device = PCI_DEVICE_ID_ACCESSIO_WDG_CSM,